Nottinghamshire

Course information&nbsp;It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator.</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the machine to be used and be familiar with other types of information sources and relevant legislation.</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify steering, driving and braking controls and explain their functions conduct all pre-operational checks in accordance with manufacturers and legislative requirements and check all emergency lowering functions.</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine configure the machine for travel.</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and maneuver it safely on level/rough ground and inclines in open and confined areas.</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area, including overhead and underground hazards maneuver the machine to work the area and correctly configure in readiness to carry out accessing tasks at various points up to full operating height.</li><li fr-original-style="" style="box-sizing: border-box;">Travel with platform raised (where applicable)</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures.</li></ul>Entry requirements&nbsp;In order to be eligible to undertake NPORS testing.Good understanding of spoken and written English.__________________________________________________________________________________Assessment&nbsp;Assessment will be to NPORS standards consisting of a theory test and practical test. &nbsp;CertificationNPORS Traditional card &ndash;&nbsp;With the traditional card there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required.&nbsp;NPORS CSCS &ndash;&nbsp;To ensure that the operator can receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.&nbsp;

Dynamic Training and Assessments Ltd

Construction

CSCS (Construction Skills Certification Scheme)

NPORS

NPORS MEWP Boom (N108)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate horizontal directional drilling rigs in the workplace safely and efficiently.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify key controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Select suitable type of horizontal directional drilling rig relative to the work being undertaken</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for horizontal directional drilling rig use</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the horizontal directional drilling rig for use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Operate machinery safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Duration</h2>Novice course &ndash; 5 DaysExperienced Worker Tests &ndash; 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

NPORS Horizontal Directional Drilling Rig (N130)

Course information&nbsp;It is envisaged that by the end of this course of training, the learner will be able to answer questions on and perform the following:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator.</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used.</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions.</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify key controls and explain their functions.</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturers and legislative requirements.</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for plant mover use.</li><li fr-original-style="" style="box-sizing: border-box;">Prepare machinery for use and operate machinery safely and efficiently.</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area.</li><li fr-original-style="" style="box-sizing: border-box;">Environmental considerations.</li><li fr-original-style="" style="box-sizing: border-box;">Storage and transport of machinery attachments.</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures.</li></ul>Entry requirements&nbsp;In order to be eligible to undertake NPORS testing.Good understanding of spoken and written English.__________________________________________________________________________________Assessment&nbsp;Assessment will be to NPORS standards consisting of a theory test and practical test.__________________________________________________________________________________CertificationNPORS Traditional card &ndash; With the traditional card, there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required.&nbsp;NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card, the candidate will be required to complete an NVQ in the specific item of plant.&nbsp;

NPORS Plant Mover - Non Operational Duties (N132)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate skid steer loads for various tasks. This course will give in depth knowledge around regulations and safe working practices and it will enable the candidate to carry out all works safely and efficiently. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N212 Skid-steer LoaderIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for skid steer loader use ➢ Conduct all necessary safety checks at the work area ➢ Prepare the skid steer loader for use, operate machinery safely and efficiently ➢ Environmental considerations ➢ Storage and transport of implements and attachments ➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Skidsteer Loader (N212)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate a industrial counterbalance lift truck.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely laden and unladen, in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;">Load and unload external transport safely</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Lifting Operations & Lifting Equipment Regulations (LOLER)

Site Management Safety Training Scheme (SMSTS)

NEBOSH

Overhead Crane Operator

FLT (Fork Lift Truck Driving License)

Lifting Operations

NPORS Industrial Counterbalance Lift Truck (N001)

COURSE INFORMATIONTo provide knowledge and understanding in the following areas:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify key controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Set up exclusion zone</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for overhead crane use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational and running checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the overhead crane for use and operate machine safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of work and shut down procedures</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.

NPORS Overhead Crane (N104)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate mobile elevating work platforms (scissor lifts) safely and efficiently while carrying out work at heights.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used, and be familiar with other types of information sources and relevant legislation</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Check all emergency lowering functions</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely on level ground and inclines in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area, including overhead and underground hazards</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out accessing tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out accessing tasks, at various points up to full operating height</li><li fr-original-style="" style="box-sizing: border-box;">Travel with platform raised (where applicable)</li><li fr-original-style="" style="box-sizing: border-box;">Use platform extension section</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

NPORS MEWP Scissor Lift (N109)

Course Objectives:<ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(64, 64, 64); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(64, 64, 64);">A basic understanding of the industry, the dangers of working in the industry and responsibilities as plant operator.</div></li></ul><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">A working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used.</div></li></ul></div><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">Be able to locate and identify the major components of the machine and explain their functions.</div></li></ul></div><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">Be able to locate and identify steering, driving and braking controls and explain their functions.</div></li></ul></div><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">Conduct all pre-operational checks in accordance with manufactures and legislative requirements.</div></li></ul></div><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">Safely mount and dismount the machine.</div></li></ul></div><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">Start and stop the engine and safely move the machine off and stop safely.</div></li></ul></div><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">Configure the machine for travel and manoeuvre it safely laden and unladen, in open and confined areas.</div></li></ul></div><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">Conduct all necessary safety checks at the work area.</div></li></ul></div><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks.</div></li></ul></div><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">Carry out lifting and load handling tasks.</div></li></ul></div><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">Lift and transfer loads accurately and safety at different locations.</div></li></ul></div><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">Load and unload external transport safely.</div></li></ul></div><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">Fit, adjust and or remove attachments.</div></li></ul></div><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.</div></li></ul></div><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><div style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><div style="color: rgb(127, 139, 147); box-sizing: border-box;" fr-original-style=" color: rgb(127, 139, 147);"></div>Carry out all end of shift shut down procedures.</div></li></ul>

NPORS Reach Lift Truck (N003)

Course InformationBy the end of the course, delegates should be able to:&nbsp;<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Demonstrate a basic understanding of the industry and their roles and responsibilities as an operator&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate a knowledge and understanding of the machine and how to operate it safely&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate a working knowledge of the manufacturer&rsquo;s handbook</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Locate and identify the major components and controls of the machine and explain their functions&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operation checks  Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel then move off and stop safely</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Manoeuvre the machine safely when laden and unladen, over varying terrain and rough ground, &nbsp;in open and confined areas and on inclines</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Carry out stacking tasks, including loading onto transport vehicle</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Safely place loads onto machine conveyor belt</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Fit, adjust and/or remove attachments&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures.</li></ul>

NPORS Log Handler (N106)

COURSE INFORMATIONTo provide knowledge and understanding in the following areas:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify key controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Set up exclusion zone</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for mobile crane use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational and running checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the mobile crane for use and operate machine safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of work and shut down procedures</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.

NPORS Mobile Crane (N101)

This&nbsp;live virtual Business Agility Foundations (ICP-BAF) training &amp; certification program&nbsp;enables the participants to learn:1. How to Adapt to Business Needs: Participants gain the ability to quickly adapt to changing business requirements, ensuring they can effectively respond to market changes and challenges.2. Opportunity Identification Skills: Participants are equipped with the skills necessary to identify and leverage potential opportunities for enhancing business systems and delivering better business value.3. Transformation of Management Models: The program provides insights on how to transform traditional management and corporate governance models into modern frameworks that prioritize agility.4. Business Agility Mindset Building: It aims to cultivate a mindset focused on business agility, emphasizing the importance of agile principles in the context of business operations.5. Frameworks, Tools, and Techniques: Participants are introduced to various frameworks, tools, and techniques essential for implementing and maintaining business agility within an organization.6. Coverage of a Broad Range of Topics: The training covers a wide spectrum of topics, including Leadership, Lean System Thinking, Network Organization, Developing People, Managing Change, and Design Thinking. <ul fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li id="isPasted" fr-original-style="" style="box-sizing: border-box;">Leadership for Agility: Learn to lead with flexibility, fostering an environment where innovation thrives.</li><li id="isPasted" fr-original-style="" style="box-sizing: border-box;">Lean System Thinking: Understand how to streamline processes for maximum efficiency and value delivery.</li><li style="color: rgb(243, 121, 52); box-sizing: border-box;" fr-original-style="color: rgb(243, 121, 52);">Network Organization: Discover how to leverage the power of networked teams and communication for enhanced collaboration and results.</li><li fr-original-style="" style="box-sizing: border-box;">Developing People: Focus on building and nurturing a team capable of driving and sustaining agility.</li><li fr-original-style="" style="box-sizing: border-box;">Managing Change: Master the strategies for managing change effectively, ensuring your organization remains resilient and responsive.</li><li fr-original-style="" style="box-sizing: border-box;">Design Thinking: Embrace customer-centric problem solving to create solutions that genuinely meet user needs and stand out in the market.</li></ul></ul>7. The Blend of Theory and Practice: Through a combination of case studies and theoretical knowledge, the program prepares participants to apply their skills as effective agility practitioners in real-world business scenarios.8. Certification Achievement: Upon successful completion, participants are awarded the ICP-BAF certification, recognizing their understanding and capability to foster business agility.Bonus Module: Enhancing Business Agility with AI &amp; Analytics:&nbsp;This bonus section covers how artificial intelligence (AI) and analytics can boost business agility. It explains how these technologies simplify decision-making, automate tasks, and analyze data to improve agile practices. Participants will learn about the practical uses of AI and analytics in making businesses more innovative and efficient, with real-world examples from agile environments. This module offers insights into using AI and analytics to enhance the agility of businesses.This course will be delivered through live virtual sessions via Zoom.&nbsp;There are the following dates on which you can opt for this course:<ol fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 22-23 Apr | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 16-17 May | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 24-25 Jun | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 11-12 Jul | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 5-6 Aug | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 19-20 Sep | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 7-8 Oct | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 14-15 Nov | 9 am - 5 pm GMT | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 16-17 Dec | 9 am - 5 pm GMT | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li></ol><div fr-original-style="" style="box-sizing: border-box;"><a href="https://drive.google.com/file/d/1UNdZWuOt1Sh55xk0BPGUclog8GhCiuMm/view?usp=drive_link" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Click Here</a>&nbsp;or download the detailed course brochure via the following link to make an informed decision:</div><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><div fr-original-style="" style="box-sizing: border-box;"><a href="https://drive.google.com/file/d/1UNdZWuOt1Sh55xk0BPGUclog8GhCiuMm/view?usp=drive_link" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; color: inherit; cursor: pointer; text-decoration: inherit;">https://drive.google.com/file/d/1UNdZWuOt1Sh55xk0BPGUclog8GhCiuMm/view?usp=drive_link</a>&nbsp;</div></li></ul>

ValueX2

https://www.valuex2.com/icagile-business-agility-foundations-certification-training/
https://www.linkedin.com/company/80563537/

Business Agility Foundations (ICP-BAF) Training & Certification Program | 2 days - 8 hrs/day | 9 am - 5 pm UK Time

General Admission

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Health & Safety

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Kent

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Dover

ECS Card Health & Safety Course Liverpool

ECS Card Health & Safety Course Newcastle

Edinburgh

Leicester

P600 provides delegates with the necessary skills and knowledge to improve their understanding of Performance Measurements in LEV.For many this will act as a starting point in their progression towards a career in LEV. &nbsp;P600 can be taken by newcomers to the field of LEV or by less experienced LEV personnel as part of their progression towards a Level 4 qualification, eg&nbsp;<a href="https://www.oxyl8.com/product/p601-thorough-examination-and-testing-of-local-exhaust-ventilation-lev-systems/" target="_blank" rel="noopener" style="color: rgb(10, 78, 112); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(10, 78, 112);">P601</a>&nbsp;&ndash;&nbsp;<a href="https://www.oxyl8.com/product/p604-performance-evaluation-and-management-of-local-exhaust-ventilation-systems/" target="_blank" rel="noopener" style="color: rgb(10, 78, 112); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(10, 78, 112);">P604</a>&nbsp;series). P600 is a Level 3 course.It does not confer &lsquo;competency&rsquo; on the delegate to allow them to undertake stutory examinations and tests under CoSHH Reg 9.In general terms &ndash; by attending this P600 delegates will gain knowledge and understanding of the:-<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Basic components of local exhaust ventilation systems.</li><li fr-original-style="" style="box-sizing: border-box;">Methodologies for undertaking the performance testing of LEV equipment</li><li fr-original-style="" style="box-sizing: border-box;">Qualitative visualisation techniques (smoke release/&rsquo;dust lamp&rsquo; etc).</li><li fr-original-style="" style="box-sizing: border-box;">Quantitative measurement techniques (anemometers, Pitot tubes etc).</li></ul>

OXYL8 Ltd

Energy Performance Certificate

Professional Skills Course (PSC)

Local Exhaust Ventilation (LEV)

FA Level 1

P600 is an introductory one-day LEV course

P600 LEV Methods for Testing Performance

P600 LEV 1 Day Course

<div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">This course is for those who would like to start a business as a Colour Consultant. The course is designed for trainees worldwide and is delivered over five colour modules plus one marketing module, each lasting four hours. Including homework, the complete course will take up approximately 30 hours of your time.There are no prerequisites for signing up for this course, we will take you through all the theory and practical sessions, building your knowledge and confidence in the subjects.Our virtual approach to training means that you really do have the best seat in the house!All of the sessions are conducted &lsquo;live&rsquo; and online by your Colour Me Beautiful trainer. Classes are kept deliberately small to enhance your learning; maximum number 4.Immediately after your virtual training you will have the flexibility to run your own&nbsp;Colour Me Beautiful&nbsp;business as a colour consultant, meaning you can start to earn money straight away.<div style="color: rgb(10, 10, 10); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(10, 10, 10);"><h5 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">TOPICS</h5></div><div style="color: rgb(10, 10, 10); box-sizing: border-box;" fr-original-style=" color: rgb(10, 10, 10);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">The History of Colour Me Beautiful</li><li fr-original-style="" style="box-sizing: border-box;">The Colour Me Beautiful System</li><li fr-original-style="" style="box-sizing: border-box;">Dominant Colour Types</li><li fr-original-style="" style="box-sizing: border-box;">Understanding colour terms</li><li fr-original-style="" style="box-sizing: border-box;">Draping techniques for women &amp; men</li><li fr-original-style="" style="box-sizing: border-box;">Practise on volunteers</li><li fr-original-style="" style="box-sizing: border-box;">Cosmetic colour selection and application</li><li fr-original-style="" style="box-sizing: border-box;">Conducting a consultation</li><li fr-original-style="" style="box-sizing: border-box;">Setting up and marketing your business</li><li fr-original-style="" style="box-sizing: border-box;">How to conduct group presentations</li></ul>As well as training in colour, we also include business and marketing, sales and presentation skills, along with ongoing training to enhance your skills.</div><div style="color: rgb(10, 10, 10); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(10, 10, 10);"><h5 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">By the end of this course you will</h5></div><div style="color: rgb(10, 10, 10); box-sizing: border-box;" fr-original-style=" color: rgb(10, 10, 10);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Be confident in assessing the dominant colouring using the Colour Me Beautiful system</li><li fr-original-style="" style="box-sizing: border-box;">Be able to conduct a colour analysis using the dominant colours</li><li fr-original-style="" style="box-sizing: border-box;">Be confident in applying a simple make-up routine to your client</li><li fr-original-style="" style="box-sizing: border-box;">Have the required knowledge to market your business</li><li fr-original-style="" style="box-sizing: border-box;">Understand the Colour Me Beautiful back office procedures</li></ul>You will receive</div><div style="color: rgb(10, 10, 10); box-sizing: border-box;" fr-original-style=" color: rgb(10, 10, 10);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">20 hours of live online colour tuition with your tutor</li><li fr-original-style="" style="box-sizing: border-box;">4 hours live online business &amp; marketing training</li><li fr-original-style="" style="box-sizing: border-box;">Starter Kit</li><li fr-original-style="" style="box-sizing: border-box;">Comprehensive training manual</li><li fr-original-style="" style="box-sizing: border-box;">Certificate upon completion</li><li fr-original-style="" style="box-sizing: border-box;">Trade account</li><li fr-original-style="" style="box-sizing: border-box;">Access to the consultant support forum</li><li fr-original-style="" style="box-sizing: border-box;">Access to consultant lounge</li><li fr-original-style="" style="box-sizing: border-box;">International directory listing</li><li fr-original-style="" style="box-sizing: border-box;">12 months Colour Me Beautiful licence upon course completion</li></ul></div></div><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"> </div>

Colour Me Beautiful

Beauty Specialist

Color Theory

Cosmetics

Beauty & Makeup

Beauty Therapy

Learn the foundation to colour analysis with this 5 day live and online, interactive course

Intermediate Colour Analysis

Brightcore Consultancy delivers Senior Mental Health Lead training in schools and colleges which meets the Department for Education&rsquo;s quality criteria, and our course is in fact the highest rated of all the nationally DfE approved Senior Mental Health Lead training courses, scoring a perfect 5/5 in each of the 9 DfE quality assurance standards during the quality assurance process. It also has an incredible average delegate rating of 4.97 out of 5 for overall quality, with 100% of former delegates recommending the course (please see our many fantastic testimonials&nbsp;<a href="https://www.brightcoreconsultancy.com/brightcore-testimonials" target="_self" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">here</a>).The highly acclaimed Senior Mental Health Lead Training and Certificate is an extensive and authoritative training course that ensures schools/colleges have the most comprehensive, effective and financially viable whole-school/college approach to mental health and wellbeing in place. Since September 2021, this course has been fully funded by the DfE for eligible schools&nbsp;and colleges. Schools and Colleges that are ineligible for the grant are, of course, more than welcome to enrol on the course but will need to self-fund their place.Working with an&nbsp;expert trainer and a highly experienced Senior Mental Health Lead, who has&nbsp;trained Senior Mental Health Leads in over 1000 schools and colleges nationwide, you will be introduced to the DfE&rsquo;s requirements for the role of the DSMHL, and learn proven, long-term, evidence-based strategies to create, lead and promote a dynamic, bespoke mental health and wellbeing approach for your setting.<ul style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"><li fr-original-style="" style="box-sizing: border-box;">Our course consists of three days of live instructor-led training as well as an additional 1-2-1 review and coaching session, and costs&nbsp;&pound;520+VAT per delegate.&nbsp;(For schools and colleges who have already completed the training with us and now wish to train further colleagues, we offer a&nbsp;subsidised rate for additional delegates of &pound;390+VAT&nbsp;- please just email us if this is an offer you would like to take up.)</li><li fr-original-style="" style="box-sizing: border-box;">Places are limited to a maximum of 15 delegates per course to ensure high quality, bespoke training.</li><li fr-original-style="" style="box-sizing: border-box;">An overview of the course structure can be found&nbsp;<a href="https://www.brightcoreconsultancy.com/_files/ugd/5bc70a_c7b3efd99188442fa7d20449bb8fd0ec.pdf" target="_blank" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">here.</a></li></ul>Our Course is suitable for those who are new to the role of Senior Mental Health Lead or those who are looking to take on this role in the near future, and is designed to meet the DfE&rsquo;s&nbsp;<a href="https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/995681/Learning_outcomes_for_senior_mental_health_leads_in_schools_and_colleges.pdf" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">Learning Outcomes for Senior Mental Health Leads</a>&nbsp;by developing and supporting their knowledge and understanding of how to design, implement and sustain an effective whole school/college approach in accordance with the eight key principles as set out by Public Health England.<a href="https://www.brightcoreconsultancy.com/brightcore-testimonials" target="_blank" style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: rgb(255, 255, 255); font-weight: bold; text-decoration: none; border-radius: 5px; background-color: rgb(61, 86, 224); border-width: 12px 18px; border-style: solid; border-color: rgb(61, 86, 224); display: inline-block; user-select: auto; box-sizing: border-box; cursor: pointer;" rel="noopener noreferrer" fr-original-style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: #ffffff; font-weight: bold; text-decoration: none; border-radius: 5px; background-color: #3D56E0; border-top: 12px solid #3D56E0; border-bottom: 12px solid #3D56E0; border-right: 18px solid #3D56E0; border-left: 18px solid #3D56E0; display: inline-block;" fr-original-class="wysiwyg_bold_link_cls">View all testimonials </a>

Brightcore Consultancy delivers Senior Mental Health Lead training in schools and colleges which meets the Department for Education’s quality criteria, and our course is in fact the highest rated of all the nationally DfE approved Senior Mental Health Lead training courses, scoring a perfect 5/5 in each of the 9 DfE quality assurance standards during the quality assurance process. It also has an incredible average delegate rating of 4.97 out of 5 for overall quality, with 100% of former delegates recommending the course (please see our many fantastic testimonials here).
The highly acclaimed Senior Mental Health Lead Training and Certificate is an extensive and authoritative training course that ensures schools/colleges have the most comprehensive, effective and financially viable whole-school/college approach to mental health and wellbeing in place. Since September 2021, this course has been fully funded by the DfE for eligible schools and colleges. Schools and Colleges that are ineligible for the grant are, of course, more than welcome to enrol on the course but will need to self-fund their place.
Working with an expert trainer and a highly experienced Senior Mental Health Lead, who has trained Senior Mental Health Leads in over 1000 schools and colleges nationwide, you will be introduced to the DfE’s requirements for the role of the DSMHL, and learn proven, long-term, evidence-based strategies to create, lead and promote a dynamic, bespoke mental health and wellbeing approach for your setting.
Our course consists of three days of live instructor-led training as well as an additional 1-2-1 review and coaching session, and costs £520+VAT per delegate. (For schools and colleges who have already completed the training with us and now wish to train further colleagues, we offer a subsidised rate for additional delegates of £390+VAT - please just email us if this is an offer you would like to take up.)
Places are limited to a maximum of 15 delegates per course to ensure high quality, bespoke training.
An overview of the course structure can be found here.
Our Course is suitable for those who are new to the role of Senior Mental Health Lead or those who are looking to take on this role in the near future, and is designed to meet the DfE’s Learning Outcomes for Senior Mental Health Leads by developing and supporting their knowledge and understanding of how to design, implement and sustain an effective whole school/college approach in accordance with the eight key principles as set out by Public Health England.
View all testimonials



Brightcore Consultancy

Mental Health

Brightcore Consultancy delivers Senior Mental Health Lead training in schools and colleges which meets the Department for Education’s quality criteria, and our course is in fact the highest rated of all the nationally DfE approved Senior Mental Health Lead training courses, scoring a perfect 5/5 in each of the 9 DfE quality assurance standards during the quality assurance process.

Designated Senior Mental Health Lead Course (Three full days plus 1-2-1 session)

This official BRCGS one-day course will provide you with a thorough understanding of vulnerability assessment for food fraud and enable you to use techniques to better identify and mitigate risks associated to raw materials in the supply chain. This is particularly useful when implementing product safety management systems and the requirements of the BRCGS Global Standards on site.This course is part of the<a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">&nbsp;BRCGS Professional recognition programme</a>.Note: An optional 2 hours module about <a href="https://ask-sonia-limited.cademy.co.uk/accredited-threat-management-taccp-2-3-hours" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; color: inherit; cursor: pointer; text-decoration: inherit;">Threat Management (TACCP)</a> is available as a bolt-on to this course. At the end of the course, you will:<ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;">Understand vulnerability assessment requirements for BRCGS</li><li fr-original-style="" style="box-sizing: border-box;">Understand what is meant by the term &#39;food fraud&#39;</li><li fr-original-style="" style="box-sizing: border-box;">Be able to identify the difference between vulnerability assessment, threat analysis critical control point and food defence</li><li fr-original-style="" style="box-sizing: border-box;">Be able to assess the raw materials most vulnerable to food fraud</li></ul>

Ask Sonia Limited

Food Safety

HACCP

Official BRCGS Product Safety Management course: Vulnerability Assessment for Food Fraud. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner.
Exam and Certificate fee included in the price.

2504 Courses in Nottingham

NPORS MEWP Boom (N108)

By Dynamic Training and Assessments Ltd

NPORS Horizontal Directional Drilling Rig (N130)

By Dynamic Training and Assessments Ltd

NPORS Plant Mover - Non Operational Duties (N132)

By Dynamic Training and Assessments Ltd

NPORS Skidsteer Loader (N212)

By Dynamic Training and Assessments Ltd

NPORS Industrial Counterbalance Lift Truck (N001)

By Dynamic Training and Assessments Ltd

NPORS Overhead Crane (N104)

By Dynamic Training and Assessments Ltd

NPORS MEWP Scissor Lift (N109)

By Dynamic Training and Assessments Ltd

NPORS Reach Lift Truck (N003)

By Dynamic Training and Assessments Ltd

NPORS Log Handler (N106)

By Dynamic Training and Assessments Ltd

NPORS Mobile Crane (N101)

By Dynamic Training and Assessments Ltd

Search By Location