Name: CWISA Wireless IoT Solutions Administrator
Price: 2797 GBP
Availability: InStock

Redhill

<h3>CWNA training course description</h3>
 A hands-on course focusing on the technical support of WiFi. Wireless LANs are often seen as simple communications that are simply installed and then left alone to work. This course ensures that delegates will be able to install WiFi networks which work but also enable the delegates to troubleshoot WiFi when it does go wrong. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 
 							 <li>Compare 802.11 standards.</li>
 <li>Configure WiFi networks.</li>
 <li>Troubleshoot WiFi networks using spectrum analysers, Wireshark and other tools.</li>
 <li>Implement 802.11 security.</li>
 <li>Perform RF surveys.</li>
 </ul>
 
 <h5>
 CWNA training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 
 Technical staff working with WiFi networks. 
 Anyone wishing to pass the CWNA exam.
 
							<li>Prerequisites:</li>
							
 
 Intro to data communications &amp; networking
							
 
							<li>Duration</li>
							
 5 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>CWNA training course contents</h3>
 <ul>
				<li>Introduction</li>
History, standards.
<li>RF fundamentals</li>
What is RF? Wavelength, Frequency, Amplitude,
Phase. Wave behaviour. RF components. Watts,
mW, dB, SNR, Link budgets. Hands on Spectrum
analysis. Listing WiFi networks. WiFi connection.
inSSIDer.
				<li>Antennas</li>
Radiation envelopes, polar charts, gain, Antenna
types. Line of Sight, MIMO. Hands on
Connecting, installing, changing antennae. RSSI
values.
<li>802.11</li>
802.11-2007, 802.11 post 2007, 802.11 drafts.
802.11 b/g/n. Hands on WiFi performance
measurement.
<li>Spread Spectrum</li>
RF frequency bands, FHSS, DSSS, OFDM.
Channels. Hands on Configuring channels.
<li>Topologies</li>
Mesh, Access points, distribution systems, SSID.
 Hands on AP configuration. Client connection
profiles.
<li>802.11 MAC</li>
CSMA/CA, Management frames, control frames,
data frames. Passive scanning, active scanning.
Open system authentication. Shared Key
authentication. Association. RTS/CTS. Power
management. Hands on Capturing frames,
analysing frames.
<li>WiFi architecture</li>
WiFi client, WLAN architecture: Autonomous,
Centralised, distributed. WiFi bridges. WiFi
routers. PoE. Hands on WLAN controllers.
<li>Troubleshooting</li>
RF interference, multipath, adjacent channels, low
SNR, mismatched power. Coverage, capacity.
<li>802.11 Security</li>
Basics, Legacy security: WEP, MAC filters, SSID
cloaking. PSK, 8021.X/EAP, WPA/WPA2. TKIP/
CCMP encryption. Guest WLANs. Wireless
attacks, intrusion monitoring. Hands on WEP
cracking, WPA2 configuration. RADIUS.
<li>RF Site surveys</li>
Protocol and spectrum analysis, coverage
analysis. Site survey tools. Hands on Performing
a site survey.
 

 </ul>

Systems & Network Training

Network & Security

Network Engineer

Certified Wireless Network Administrator

General Admission

<h3>Oracle Database 12c Admin training course description</h3>
 This Oracle Database 12c Administration course is designed to give the Oracle database administrator practical experience in administering, monitoring, tuning and troubleshooting an Oracle 12c database. Database administrators will gain an understanding of the architecture and processes of the Oracle database server. They will be able to ensure the integrity and availability of a company's data within the Oracle environment. They will be able to monitor the performance of the database, allocate resources with the Resource Manager and Schedule jobs.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Administer an Oracle database instance.</li>
<li>Monitor an Oracle database.</li>
<li>Configure the Oracle network environment.</li>
<li>Create and manage database storage structures.</li>
<li>Manage users, profiles, privileges and roles.</li>
<li>Manage undo data and temporary segments.</li>
<li>Monitor and resolve lock conflicts.</li>
<li>Maintain database security.</li>
<li>Implement database auditing.</li>
<li>Monitor the performance of the Database.</li>
<li>Load and unload data.</li>
<li>Use the job scheduler.</li>
<li>Configure a database for backup and recovery.
</li>
 
 </ul>
 <h5>
 Oracle Database 12c Admin training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 This Oracle Database 12c Administration course is for anyone who needs to administer, monitor and support an Oracle 12c database. 
 
							<li>Prerequisites:</li>
							
							An understanding of relational database concepts and good operating system knowledge. They should have attended the Oracle SQL course or have a good working knowledge of Oracle SQL. Knowledge of the usage of PL/SQL packages is highly recommended.
 
							<li>Duration</li>
							
 5 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Oracle Database 12c Admin training course contents</h3>
 <ul>
 <li>Introduction to Oracle database 12c </li>
Overview of the Oracle database 12c, Overview of the Oracle Cloud, Relational database concepts, database administration tasks.

<li>Oracle Database 12c Architecture </li>
Overview of the Oracle database architecture, The Oracle database instance, Oracle Database memory structures, Process architecture and structures, Server and client processes, The Oracle database storage architecture, Connect to the Oracle database instance.

<li>Administer a database instance </li>
Administrative tools available to a DBA, Use SQL*Plus in Oracle to manage a database instance, Use SQL Developer to manage a database instance, Administer the database using Enterprise Manager (EM), Overview of the Enterprise Manager framework, Access Enterprise Manager Database Express, The Enterprise Manager Database Express Home Page, Enterprise Manager Cloud Control, Initialization parameter files.

<li>Configure the Oracle network environment </li>
Overview of network configuration, Oracle Net Listener configuration and management, Oracle Net naming methods, Tools for configuring and managing the Oracle network, Using the Net Configuration Assistant, Configure client connections with Net Manager, View listener configuration, Start and stop the Oracle listener, Use TNSPING to test Oracle Net connectivity, Connect to the database, Configure Net Services with Enterprise Manager.

<li>Storage Structures </li>
Overview of data storage, The database block, Overview of tablespaces and datafiles, Use Enterprise Manager to view the storage structure of the database, Create and alter tablespace commands, Temporary tablespaces, Create and manage datafiles, Use OMF, Drop tablespaces and datafiles.

<li>Manage users </li>
Predefined database administration accounts, User accounts, Create a user account, User authentication, Change a user's password, Manage a user account, Drop a user account, Monitor user information, Terminate user sessions.

<li>Manage profiles and resources </li>
Overview of user profiles, Profile resource parameters, Create profile command, Manage passwords with profiles, Control resource usage with profiles, Maintain profiles.

<li>Manage privileges </li>
Database access, Oracle supplied roles, System and object level privileges, The grant and revoke commands, Create, modify and drop roles, Use predefined roles.

<li>Database auditing </li>
Overview of database security, Overview of database auditing, Security compliance, Standard auditing, Unified audit trail, Separation of audit responsibilities with the AUDIT_ADMIN and AUDIT_VIEWER roles, Configure the audit trail, Specify audit options.

<li>Data concurrency and lock conflicts </li>
Levels of locking in Oracle, Methods used to acquire locks, Data concurrency, Possible causes of contention, DML locks, Prevent locking problems, Detect lock contention, Resolve conflicts.

<li>Undo management </li>
Undo data overview, Monitor and administer undo, Configure undo retention, Switch undo tablespaces, Specify the retention period, Guarantee undo retention, Retention period for flashback queries, View undo space information, Use the undo advisor, Size the undo tablespace, Alter an undo tablespace to a fixed size.

<li>Proactive database management </li>
Database Maintenance, View the alert log, The Automatic Workload Repository, Statistic levels, The Automatic Database Diagnostic Monitoring, Monitor an Oracle database, Use the Advisors, Set up notification rules/

<li>Performance management </li>
Tuning information sources, Performance monitoring, Tuning activities, Performance planning, Instance tuning, Performance tuning methodology, Performance tuning data, Monitoring performance, Managing memory.

<li>SQL tuning </li>
SQL tuning, The Oracle Optimizer, SQL Plan directives, Adaptive execution plans, SQL Advisors, Automatic SQL Tuning results, Implement automatic tuning recommendations , SQL Tuning Advisor.

<li>Moving data </li>
Create directory objects , Data Pump architecture, Data Pump data dictionary views, Data Pump interactive mode, Data Pump API, Use Data Pump to export and import data, Overview of SQL Loader, Command line parameters, Record filtering, Control file keywords, Datafiles, SQL Loader data paths, External Tables.

<li>Automate tasks with the scheduler </li>
Introduction to the Scheduler, Access Rights, Scheduler components and workflow, Create a Job, Job Classes, Use time based, event based schedules, Create an event based schedule.

<li>Managing resources with Resource Manager </li>
Overview of the Database Resource Manage, Use the Resource Manager, Create Resource Plans, The default maintenance resource manager plan, Create Resource Plan Directives, Allocate resources for Resource Plans.

<li>Manage space </li>
Overview of space management, Block space management within segments, Segment types, Allocate extents, Allocate space, Row chaining and migration, Create tables without segments.

<li>Backup and recovery configuration </li>
Oracle backup solutions, Oracle suggested backup strategy, Overview of database backup, restore and recover, Flashback technology, Types of failure ,Instance recovery, Tune instance recovery, The MTTR Advisor, Media failure, Configure a database for recoverability

<li>Oracle support </li>
The Enterprise Manager Support Workbench, Register for security updates, Work with Oracle Support, My Oracle Support integration, Log Service Requests, Manage patches, Apply a patch
 </ul>

Oracle database administration

<h3>CCNA training course description</h3>
 The Implementing and Administering Cisco
Solutions (CCNA) course gives you a broad range of
fundamental knowledge for all IT careers. Through a
combination of lecture, hands-on labs, and self-study,
you will learn how to install, operate, configure, and
verify basic IPv4 and IPv6 networks. The course covers
configuring network components such as switches,
routers, and wireless LAN controllers; managing
network devices; and identifying basic security threats.
It also gives a foundation in network programmability,
and software-defined networking
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Install, configure, and operate a small to medium
sized network</li>
<li> Gain a foundation in the essentials of networking,
security, and automation</li>
<li> Prepare for the 200-301 CCNA exam, which
earns CCNA certification</li>
 
 </ul>
 <h5>
 CCNA training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 
 Network support help desk technicians involved in the
basic installation, operation, and verification of Cisco
networks. Anyone seeking CCNA certification.
 
							<li>Prerequisites:</li>
							
 Introduction to Data communications &amp; networking
 
							<li>Duration</li>
							
 5 days
 
							
 
 
						</ul>
					</div>
				</div>
			
				 <h3>CCNA training course content</h3>
				
 <ul>
				<li>After taking this course, you should be able to:</li>
Identify the components of a computer network and
describe their basic characteristics. 
Understand the model of host-to-host communication. 
Describe the Cisco IOS software. 
Describe LANs and the role of switches within LANs. 
Describe Ethernet and describe the operation of switches. 
Install a switch and perform the initial configuration. 
Describe the TCP/IP Internet layer, IPv4, its addressing
scheme, and subnetting. 
Describe the TCP/IP Transport and Application layers
Explore functions of routing. 
Implement basic configuration on a Cisco router. 
Explain host-to-host comms across switches and routers. 
Identify and resolve common switched network issues
and common problems associated with IPv4 addressing. 
Describe IPv6 main features and addresses, and
configure and verify basic IPv6 connectivity. 
Describe static routing. 
Describe, implement, and verify VLANs and trunks. 
Describe inter VLAN routing. 
Explain the basics of dynamic routing protocols and
describe components and terms of OSPF. 
Explain how STP and RSTP work. 
Configure link aggregation using EtherChannel. 
Describe the purpose of Layer 3 redundancy protocols. 
Describe basic WAN and VPN concepts. 
Describe the operation of access control lists (ACLs) and
their applications in the network. 
Configure Internet access using DHCP clients and
explain and configure NAT on Cisco routers. 
		 Describe
basic QoS concepts. 
Describe the concepts of wireless networks, which types
of wireless networks can be built, and how to use
Wireless LAN Controllers (WLCs). 
Describe network and device architectures, introduce
virtualization, network programmability and SDN and
describe smart network management solutions such as
Cisco DNA Centerâ¢, SD-Access, and SD-WAN. 
Configure basic IOS system monitoring tools. 
Describe the management of Cisco devices. 
Describe the current security threat landscape. 
Describe threat defence technologies. 
		 Implement a basic
security configuration of the device management plane. 
Implement basic steps to harden network devices. 

<li>Detailed course outline</li>
Exploring the Functions of Networking. 
The Host-to-Host Communications Model. 
Operating Cisco IOS Software. 
Introducing LANs. 
Exploring the TCP/IP Link Layer. 
Starting a Switch. 
The TCP/IP IP layer, IPv4 Addressing, and Subnets. 
The TCP/IP Transport Layer and Application Layer. 
Exploring the Functions of Routing. 
Configuring a Cisco Router. 
Exploring the Packet Delivery Process. 
Troubleshooting a Simple Network. 
Introducing Basic IPv6. 
Configuring Static Routing. 
Implementing VLANs and Trunks. 
Routing Between VLANs. 
Introducing OSPF. 
Redundant Switched Topologies with EtherChannel. 
Explaining Basics of ACL. 
Enabling Internet Connectivity. 
Explaining the Evolution of Intelligent Networks. 
Introducing System Monitoring. 
Managing Cisco Devices. 
Securing Administrative Access. 
Implementing Device Hardening.


<li>Self-Study: </li>
Building Redundant Switched Topologies. 
Exploring Layer 3 Redundancy. 
Introducing WAN Technologies. 
Introducing QoS. 
Explaining Wireless Fundamentals. 
Introducing Architectures and Virtualization. 
Examining the Security Threat Landscape. 
Threat Defense Technologies. 

 </ul>

CCNA

<h3>MySQL server admins training course description</h3>
 This MySQL Server administration course is designed
for MySQL Server administrators who have a basic
understanding of a MySQL database and a good
working knowledge of SQL commands.
The course provides an understanding of MySQL
Architecture and practical experience in setting up,
configuring and maintaining a MySQL server, backing
up and recovering data and optimising query
performance. This MySQL Server administration course
also covers MySQL replication and its role in high
availability and scalability.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Use MySQL Workbench.</li>
 <li>Install and configure a MySQL Server .</li>
 <li>Administer and tune a MySQL server.</li>
 <li>Configure log files and interpret error messages..</li>
 <li>Secure the Server.</li>
 <li>Administer a replication topology.</li>
 </ul>
 <h5>
 MySQL server admin training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Database administrators, Database developers and
Technical consultants.
 
							<li>Prerequisites:</li>
							
							Introduction to MySQL
 
							<li>Duration</li>
							
 5 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>MySQL server admin training course contents</h3>
 <ul>
 <li>Introduction to Oracle Application Express </li>
APEX concepts APEX main components Workspaces, database applications and websheet applications Creating a workspace The Workspace Administrator Upgrading APEX Logging into APEX Running an application

<li>SWL Workshop </li>
Use APEX to browse, create and modify objects Process ad hoc SQL statements Manage scripts in APEX Create, run and save SQL queries

<li>Build a database application </li>
Application components Create an application Create an application from a spreadsheet

<li>Create reports </li>
Create reports using wizards Edit report attributes Add links to reports Create a link to a printer-friendly version of a report Save and print reports in different formats

<li>Using files </li>
Uploading images Creating cascading stylesheet files Uploading static files Adding an Image as an application logo Adding a reference to a Javascript file

<li>Pages and regions </li>
Web form behaviour in APEX Create a form based on a table Create a form based on a procedure Create a form with a report Create a tabular form Format a form Locking in APEX forms

<li>Creating lists of values </li>
Overview of application express shared Components Dynamic and static lists of values Create a dynamic list of values Create a static list of values Use a list of values to control data in a report Create a cascading list of values

<li>Items and buttons </li>
Understand the different Types of items Create items Understand and edit item attributes Use Javascript with item Manipulate items in tabular forms Add dynamic items to a report Create and edit buttons

<li>Page Processing </li>
Page rendering and page processing Create computations Validate input data Process Data Understand application branching Create conditional branches

<li>Shared components </li>
Overview of application express navigation components Manage parent and standard tabs Create navigation bar entries Create and use lists and list items Manage breadcrumbs Create shortcuts Shared component subscription User interface defaults

<li>Display dynamic content </li>
Filter reports with dynamic queries Create charts with a wizard Format charts Create calendars Add links to calendars Create hierarchical trees

<li>State and debugging </li>
Understand session state Set a session state value Clear the session state Review the session state Review the messages in debug mode Enabling feedback Managing feedback and team development

<li>Themes and templates </li>
Switch to a different theme View existing templates Understand and manage templates Create a new template Add references to cascading stylesheet and Javascript files

<li>Dynamic actions and plug-in components </li>
Identify plug-in components and their types Plug In a component Create dynamic actions Use a plug-in in a dynamic action

<li>Building website applications </li>
Websheet applications and their components Create a websheet application Enable SQL and PL/SQL in a websheet application Add sections and pages to a websheet application Add links on a websheet page Add a data grid to a websheet application Create SQL reports ion websheet applications Add annotations to a websheet application

<li>Implementing security </li>
Authentication and authorization Provide an authentication scheme Create an authorization scheme using access control Enable and configure session state protection

<li>Deploy an appliction </li>
Define supporting objects Package an application Export an application Import an application Install supporting objects

<li>Administer Apex workspaces </li>
Manage workspaces and users Request a schema or storage Purge session state Monitor developer activity log Monitor workspace activity View activity reports Import a workspace

<li>Utility programs </li>
Import and export data Generate DDL statements View objects reports
 </ul>

MySQL server administration

<h3>Definitive IP routing training course description</h3>
 An intensive hands on IP routing course leading to
 LINX Accredited Internet Technician stage 2 focusing
 on routing in an IP environment. The course
 concentrates on OSPF and IS-IS but also covers BGP
 and MPLS. Hands on sessions are used to reinforce
 the theory rather than teach specific manufacturer
 equipment. 
 A multiple choice exam, leading to the LAIT II
 certification, is available after the course. The exam
 consists of 60 questions and lasts 2.0 hours. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Calculate subnet numbers in seconds.</li>
 <li>Configure and troubleshoot static routes.</li>
 <li>Explain how OSPF works.</li>
 <li>Build resilient networks with VRRP and OSPF.</li>
 <li>Implement and troubleshoot OSPF, IS-IS and
 VLANS.</li>
 <li>Evaluate and choose appropriate routing protocols for particular scenarios.</li>
 </ul>
 An optional multiple choice exam, leading to the LAIT II certification, is included at the end of the course. The exam consists of 60 questions and lasts 2.0 hours.
 <h5>
 Definitive IP routing training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Network engineers 
 
							<li>Prerequisites:</li>
							
 TCP/IP Foundation for engineers
 
							<li>Duration</li>
							
 5 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Definitive IP routing training course contents</h3>
 <ul>
 <li>Basic routing</li>
 Review of LAIT I routing, reading routing tables. 
 
 Hands on Setting up a routed network. 
 <li>Static routes</li>
 Why use static routes? Default routes. 
 
 Hands on Configuring static routes. 
 <li>First hop redundancy</li>
 Default gateways, VRRP/HSRP/GLBP. Load
 sharing, critical IP addresses. 
 Hands on VRRP. 
 <li>Basic OSPF</li>
 What is OSPF? Process IDs, passive interfaces. 
 Hands on Simple OSPF. 
 <li>Subnetting</li>
 Bit boundary subnetting, calculating network
 numbers. 
 
 Exercise: Subnetting. 
 <li>OSPF overview</li>
 Metrics, convergence, DV vs. Link state, IGPs,
 classless, OSPF features, load sharing, OSPF
 authentication. 
 Hands on OSPF features. 
 <li>OSPF within an area</li>
 How OSPF works, LSAs, LSDB, router IDs, hellos,
 configuring hellos, exchange protocol. 
 Hands on Investigating OSPF structures.
			
 
 <li> OSPF areas</li>
 
 Scalability, why areas? Area IDs, area 0, ABRs,
 ABR resilience, areas &amp; LSDBs &amp; LSAs, virtual
 links. 
 Hands on Multi area OSPF. 
 <li>Redistribution</li>
 Multiple routing protocols, common scenarios,
 routing distance, External LSAs, E1 and E2. Type
 4 LSAs. OSPF and default routes. 
 Hands on Configuring static route redistribution. 
 <li>Route aggregation</li>
 Route summarisation. How to aggregate, CIDR,
 ASBR summarisation. 
 Hands on OSPF address
 summarisation. 
 <li>OSPF packet formats</li>
 OSPF packets, protocol stack, packet flows,
 OSPF headers, neighbours, neighbour states,
 DRs, adjacencies, BDRs, DR election. 
 Hands on Analysing OSPF packets, troubleshooting. OSPF 
 <li>OSPF stub areas</li>
 LSA types, area types, area architecture, stub
 areas, default routes, benefits &amp; disadvantages of
 stub areas, TSSAs, NSSAs, Type 7 LSAs. 
 Hands on Stub and TSSA configuration. 
 <li>IS-IS</li>
 End systems, Intermediate systems, how IS-IS
 works, IS-IS router ID, Level 1, Level 2, IS-IS
 hierarchy. 
 Hands on Configuring IS-IS,
 troubleshooting IS-IS. 
 <li>The Internet</li>
 Autonomous systems, Peering, transit, looking
 glasses. 
 Hands on Internet routing tables. 
 <li>Basic BGP</li>
 IGPs, EGPs, What's BGP? BGP RIB, in/out
 process, tables peers, adding routes. 
 Hands on Simple configuration and troubleshooting. 
 <li>Routing IPv6</li>
 Multi protocol routing, IPv6 addressing, IPv6
 routing tables, IPv6 static routes, OSPFv3, IS-IS
 and IPv6. 
 Hands on Routing IPv6. 
 <li>STP and L2 routing</li>
 STP, RSTP, L2 IS-IS, Multi system link
 aggregation. 
 Hands on RSTP. 
 <li>MPLS</li>
 Core MPLS, MPLS and the 7 layer model, MPLS
 protocol, MPLS standard, MPLS runs on routers,
 MPLS history, Why MPLS?, LSRs, PE and P
 router roles, FEC, swapping labels, MPLS packet
 format. 
 Hands on Enabling MPLS. Testing and
 troubleshooting of MPLS. 
 <li>Appendix</li>
 EIGRP: How EIGRP works, DUAL. 
 </ul>

Definitive IP routing for engineers

<h3>Linux engineer certification training course description</h3>
 LPIC-2 is the second certification in LPI's multi level
professional certification program. This course teaches
the skills necessary to pass the LPI 201 exam; the first
of two LPIC-2 exams. Specifically, the course covers
the administration of Linux systems in small to medium
sized mixed networks. 
 
				<h5>What will you learn</h5>
				<ul>
				 
	 <li>Perform advanced administration tasks.</li>
					<li>Perform advanced file system administration.</li></ul>
 <h5>
 Linux engineer certification training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Linux administrators.
 
							<li>Prerequisites:</li>
							
 Linux system administration (LPIC-1)
							
 
							<li>Duration</li>
							
 5 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Linux engineer certification fundamentals training course contents</h3>
 <ul>
				<li>Part I The LPI 201 Exam </li>

<li>Starting a System </li>
The Linux Boot Process, Firmware Startup, BIOS Startup, UEFI Startup, Linux Bootloaders, GRUB Legacy, GRUB 2, Alternative Bootloaders, Secure Bootloaders, Process Initialization, SysV Method, systemd Method, Upstart Method, System Recovery, Kernel Failures, Root Drive Failure.

<li>Maintaining the System </li>
Fluid Messaging, Static Messaging, System backups, Backup Strategies, Performing Backups, Installing Programs from Source, Obtaining and unpacking Installation Files, Compiling Programs, Resource Usage: Managing, measuring, predicting and troubleshooting.

<li>Mastering the Kernel </li>
What Is the Kernel? Kernel Features, Parts of the Kernel, Kernel Versions, Obtaining Source Code, Creating the Configuration File, Compiling and Installing the Kernel, Compiling and Installing Modules, Creating an Initial RAM Disk, Booting the New Kernel, Creating a Kernel Package, Maintaining the Kernel, Working with Module Files, Module Commands, Working with Hardware, Automatically Detecting Hardware, Troubleshooting the Kernel.

<li>Managing the Filesystem </li>
The Linux Filesystem, Filesystem Structures, Filesystem Types, Making Filesystems, Attaching Filesystems, Memory-Based Linux Filesystems, the Btrfs Filesystem, Btrfs Subvolumes, Btrfs Snapshots, Optical Filesystems, Swap Filesystems, Network-Based Filesystems, Auto-Mounting, Encrypted Filesystems, Maintaining Linux Filesystems, Adjusting a Filesystem, Checking and Repairing a Filesystem, SMART.

<li>Administering Advanced Storage Devices </li>
Configuring RAID, Implementing RAID on Linux, Managing a RAID Array, Adjusting Storage Devices, Looking at Drive Interface Concepts, Testing and Tuning Drives, Implementing iSCSI, Managing Logical Volumes, LVM, Creating Logical Volumes, Supporting Logical Volumes, Understanding the Device Mapper.

<li>Navigating Network Services </li>
Networking Basics, The Physical Layer, The Network Layer, The Transport Layer, The Application Layer, Configuring Network Features, Network Configuration Files, Graphical Tools, Command-Line Tools, Basic Network Troubleshooting, Checking the Log Files, the ARP Cache, Sending Test Packets, Testing Network Routes, Testing Client/Server Connectivity, Finding Host Information, Network Security, Advanced Network Troubleshooting, Viewing Open Network Connections, Viewing Network Statistics, Scanning the Network, Capturing Network Traffic.
 </ul>

Linux engineer certification 1 (LPIC-2)

<h3>Cloud deployment training course description</h3>
 This course covers the important topics every cloud
professional needs, including, configuration and
deployment, security, maintenance, management, and
troubleshooting. It covers all aspects of cloud
computing infrastructure and administration, with a
practical focus on real-world skills. It will help you to
master the fundamental concepts, terminology, and
characteristics of cloud computing. Deploy and
implement cloud solutions, manage the infrastructure,
and monitor performance. You will also be able to
install, configure, and manage virtual machines. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Cloud services, models, and characteristics.</li>
<li>Virtualization components, installation, and
configuration.</li>
<li>Infrastructure configurations and optimization.</li>
<li>Resource management and specific allocations.</li>
<li>IT security concepts, tools, and best practices.</li>
<li>Recovery, availability and continuity in the cloud.</li>
 </ul>
 <h5>
 Cloud deployment training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 IT professionals looking to deploy and implement cloud
solutions, manage the infrastructure, and monitor
performance, Install, configure, and manage virtual
machines.
 
							<li>Prerequisites:</li>
							
 Introduction to virtualization.
 
							<li>Duration</li>
							
 5 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Cloud deployment training course contents</h3>
 
				Preparing to Deploy Cloud Solutions 
Deploying a Pilot Project 
Testing Pilot Project Deployments 
Designing a Secure and Compliant Cloud Infrastructure 
Designing and Implementing a Secure
Cloud Environment 
Planning Identity and Access Management for Cloud
Deployments 
Determining CPU and Memory Sizing for Cloud
Deployments 
Determining Storage Requirements for Cloud
Deployments 
Analysing Workload Characteristics to Ensure
Successful Migration 
Maintaining Cloud Systems 
Implementing Backup, Restore, Disaster Recovery, and
Business Continuity Measures 
Analysing Cloud Systems for Performance 
Analysing Cloud Systems for Anomalies and Growth
Forecasting 
Troubleshooting Deployment, Capacity, Automation, and
Orchestration Issues 
Troubleshooting Connectivity Issues 
Troubleshooting Security Issues

Cloud deployment

<h3>BGP training course description</h3>
 A detailed study of BGP, from the basics of how it
works through to advanced issues such as route
reflectors, policy, filtering, route selection and routing
registries. The course culminates with a study of an
industrial strength BGP template illustrating important
issues such as bogon filtering. Practical hands on with
routers follow the major sessions to reinforce the
theory. 
				A multiple choice exam, leading to the LAIT III
certification, is available after the course. The exam
consists of 60 questions and lasts 2 hours.

		
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Connect enterprises to the Internet, and ISPs to each other.</li>
 <li>Describe how BGP works.</li>
 <li>List, describe and configure the main BGP attributes.</li>
 <li>Implement and troubleshoot BGP.</li>
 <li>Work with route aggregation and calculate CIDR prefixes in seconds.</li>
 <li>Influence traffic paths with BGP.</li>
 
 </ul>
 <h5>
 BGP training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone who will be working with BGP.
 
							<li>Prerequisites:</li>
							
 TCP/IP Foundation for engineers 
 Definitive IP routing for engineers.
 
							<li>Duration</li>
							
 5 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>BGP training course contents</h3>
 <ul>
				<li>Basic BGP</li>
IGPs, EGPs, What's BGP? BGP RIB, in/out process,
tables peers, adding routes. 
 Hands on Simple
configuration and troubleshooting.
				<li>The Internet and peering</li>

ASs, AS numbers, Internet structure, ISP types,
ISP network design, IXs, peering vs. transit, public/
private peering, bi/multi-lateral peering. Hands on
AS information gathering.
<li>How BGP works</li>
Incremental updates, Path vector protocols, BGP
protocol stack, the BGP header, message types,
NLRI, withdrawn routes, route refresh, route
dampening. Hands on More troubleshooting,
packet analysis.
<li>MBGP and IPv6</li>
Multiprotocol routing, AFI, SAFI, MBGP and
multicasts, IPv6, MPLS VPNs. Hands on IPv6
<li>BGPv4 aggregation</li>
CIDR, benefits, techniques, shortcuts, configuring
BGP aggregation, leaking routes. Hands on
Reducing routing table size.
<li>BGP path selection</li>
BGP attributes, attribute types, route selection
order, Local preference, AS prepend, MEDs.
 Hands on Influencing traffic with BGP.
<li>BGP routing policies</li>
What is policy? Examples, route filtering, AS
filtering, REs, applying preference selectively, peer
groups. Hands on Sophisticated policies.
<li>RIPE and routing registries</li>
RIRs, Allocations, assignments, PI vs. PA. Objects,
RPSL, routing registry, Hands on The RIPE
database.
<li>Automating BGP configuration</li>
Automation tools, whois, IRRToolSet, Bogon lists,
tracking bogon lists, HTTP, Peering, routing
registries, DNS.
<li>Communities</li>
What is a community? Community names,
communities for: peer types and geography. RFC
1998, default communities. Hands on Setting
local preference on other routers.
<li>Route servers</li>
What are route servers? LINX route servers, route
server policy control, What are route collectors,
Looking glasses. Hands on Setting up and
working with a route server.
<li>Peer relationships</li>
IBGP, EBGP, next hop self, advertising routes
into/out of BGP, synchronisation. Hands on IBGP,
troubleshooting a large BGP network.
<li>Route reflectors and confederations</li>
Full mesh IBGP, Route reflectors, RR
configuration and design, confederations,
migration issues. Hands on RR configuration.
<li>BGP architectures</li>
Stub vs. transit AS, when to use BGP,
multihoming strategies and issues, default routes.
Multihop EBGP, load balancing. Hands on Multihoming.
<li>BGP security</li>
RFC 7454, security steps, BGP TTL security,
filters, RPKI, ROAs, rsync, rrdp, validators. A
secure BGP template. Hands on RPKI prefix
validation.


 </ul>

Total BGP for engineers

<h3>Security+ training course description</h3>
 
 A hands on course aimed at getting delegates successfully through the CompTia Security+ examination. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Explain general security concepts.</li>
					<li>Describe the security concepts in communications.</li>
					<li>Describe how to secure an infrastructure.</li>
 <li>Recognise the role of cryptography.</li>
					<li>Describe operational/organisational security.</li>
 </ul>
 <h5>
 Security+ training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Those wishing to pass the Security+ exam.
 
							<li>Prerequisites:</li>
							
 TCP/IP foundation for engineers
 
							<li>Duration</li>
							
 5 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Security+ training course contents</h3>
				<ul>	<li>General security concepts</li>
Non-essential services and protocols. Access
control: MAC, DAC, RBAC. Security attacks: DOS,
DDOS, back doors, spoofing, man in the middle,
replay, hijacking, weak keys, social engineering,
mathematical, password guessing, brute force,
dictionary, software exploitation. Authentication:
Kerberos, CHAP, certificates, usernames/
passwords, tokens, biometrics. Malicious code:
Viruses, trojan horses, logic bombs, worms.
Auditing, logging, scanning.
					<li>Communication security</li>
Remote access: 802.1x, VPNs, L2TP, PPTP,
IPsec, RADIUS, TACACS, SSH. Email: S/MIME,
PGP, spam, hoaxes. Internet: SSL, TLS, HTTPS,
IM, packet sniffing, privacy, Javascript, ActiveX,
buffer overflows, cookies, signed applets, CGI,
SMTP relay. LDAP. sftp, anon ftp, file sharing,
sniffing, 8.3 names. Wireless: WTLS, 802.11,
802.11x, WEP/WAP.
	<li>Infrastructure security</li>
Firewalls, routers, switches, wireless, modems,
RAS, PBX, VPN, IDS, networking monitoring,
workstations, servers, mobile devices. Media
security: Coax, UTP, STP, fibre. Removable
media. Topologies: Security zones, DMZ, Intranet,
Extranet, VLANs, NAT, Tunnelling. IDS: Active/
passive, network/host based, honey pots, incident
response. Security baselines: Hardening OS/NOS,
networks and applications.
	<li>Cryptography basics</li>
Integrity, confidentiality, access control,
authentication, non-repudiation. Standards and
protocols. Hashing, symmetric, asymmetric. PKI:
Certificates, policies, practice statements,
revocation, trust models. Key management and
certificate lifecycles. Storage: h/w, s/w, private key
protection. Escrow, expiration, revocation,
suspension, recovery, destruction, key usage.
	<li>Operational/Organisation security</li>
Physical security: Access control, social
engineering, environment. Disaster recovery:
Backups, secure disaster recovery plans.
Business continuity: Utilities, high availability,
backups. Security policies: AU, due care, privacy,
separation of duties, need to know, password
management, SLAs, disposal, destruction, HR
policies. Incident response policy. Privilege
management: Users, groups, roles, single sign
on, centralised/decentralised. Auditing. Forensics:
Chain of custody, preserving and collecting
evidence. Identifying risks: Assets, risks, threats,
vulnerabilities. Role of education/training. Security
documentation. 

				</ul>

Security+

<h3>CWISA training course description</h3>
 
 This CWISA course covers wireless technologies with
reference to IoT. It examines from an IoT perspective
how wireless works, and is an excellent introduction to
IoT for the wireless engineer. Topics range from wireless
technologies, RF, to mobile networks, IoT, and security.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Describe wireless networking and IoT technologies.</li>
					<li>Explain basic RF communications.</li>
					<li>Plan wireless solutions.</li>
					<li>Describe how to implement wireless solutions.</li>
					<li>Use best practices in implementing wireless
solutions.</li>
 </ul>
 
 <h5>
 CWISA training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone working with IoT technologies.
 
							<li>Prerequisites:</li>
							
 RF fundamentals.
 
							<li>Duration</li>
							
 4 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>CWISA training course contents</h3>
							
	<ul>				
<li>Introduction to wireless technologies</li>
History of wireless, radio waves and frequencies,
wireless technologies and related components,
common components of wireless solutions, LAN
networking requirements, Network security,
Implementing wireless solutions, staging,
documentation, security updates, Industry
organizations, IEEE, compatibility and certification
groups.
<li>Wireless network use cases</li>
Wireless BANs, Wireless PANs, Wireless LANs,
Wireless MANs, Wireless WANs, Wireless sensor
networks, New network driver-Internet of Things,
IoT for industry (IIoT), IoT for connected vehicles,
Residential environments, Retail, Education (K12), Higher education, Agriculture, Smart cities /
Public access, Health care, Office buildings,
Hospitality, Industry, Stadiums, arenas, and large
public venues.
<li>Planning wireless solutions</li>
Identifying use cases and applications, common
wireless requirements and constraints, performing
a wireless system design, selecting and evaluating
design parameters.
<li>RF communications</li>
RF wave characteristics, RF propagation
behaviours, RF signal metrics, fundamentals of
wireless modulation. other wireless carriers,
common frequency bands.
<li>Radio frequency hardware</li>
Hardware levels, basic RF hardware components
(circuit board level), RF link types (use category).
RF device types.
<li>Mobile communications networks</li>
Mobile networks, LTE, 5G, Use cases.
<li>Short-range, low-rate, and low-power networks</li>
RF and speed, RF and range, RF and power,
802.11, 802.15.4, Bluetooth, LoRa (Long range) /
LoRaWAN, ZigBee, 6LoWPAN, NB-IoT and
LTE-M.
<li>Wireless sensor networks</li>
What is a Wireless Sensor Network (WSN)? WSN
applications, Sensors and actuators, WSN
architectures, Planning a WSN.
<li>Internet of Things (IoT)</li>
Internet of Things (IoT) defined, IoT history and its
definition revisited, one more comment on the
definition of IoT, IoT verticals, Oil &amp; Gas, IoT
structure/ architecture basics, IoT connected
objects.
<li>Securing wireless networks</li>
Confidentiality, integrity and availability, Privacy,
non-repudiation, authenticity &amp; safety, Importance
of authentication in wireless networks, Key
cryptographic technologies &amp; concepts,
Authentication methods, Authorisation, OAuth 2.0
authorisation framework, monitoring.
<li>Troubleshooting wireless solutions</li>
Proper solutions design, designing and
implementing wireless solutions, basic installation
procedures, general configuration considerations,
troubleshooting and remediation, troubleshoot
common problems in wireless solutions.
<li>Programming, scripting and automation</li>
What is an API? categories of APIs, common API
communication methods, choosing a language,
why are we integrating systems? Application &amp;
integration architectures. Data structures &amp; types,
XML, YAML, API types.

				</ul>

CWISA Wireless IoT Solutions Administrator

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Health & Safety

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Kent

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Dover

ECS Card Health & Safety Course Liverpool

ECS Card Health & Safety Course Newcastle

Edinburgh

Leicester

P600 provides delegates with the necessary skills and knowledge to improve their understanding of Performance Measurements in LEV.For many this will act as a starting point in their progression towards a career in LEV. &nbsp;P600 can be taken by newcomers to the field of LEV or by less experienced LEV personnel as part of their progression towards a Level 4 qualification, eg&nbsp;<a href="https://www.oxyl8.com/product/p601-thorough-examination-and-testing-of-local-exhaust-ventilation-lev-systems/" target="_blank" rel="noopener" style="color: rgb(10, 78, 112); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(10, 78, 112);">P601</a>&nbsp;&ndash;&nbsp;<a href="https://www.oxyl8.com/product/p604-performance-evaluation-and-management-of-local-exhaust-ventilation-systems/" target="_blank" rel="noopener" style="color: rgb(10, 78, 112); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(10, 78, 112);">P604</a>&nbsp;series). P600 is a Level 3 course.It does not confer &lsquo;competency&rsquo; on the delegate to allow them to undertake stutory examinations and tests under CoSHH Reg 9.In general terms &ndash; by attending this P600 delegates will gain knowledge and understanding of the:-<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Basic components of local exhaust ventilation systems.</li><li fr-original-style="" style="box-sizing: border-box;">Methodologies for undertaking the performance testing of LEV equipment</li><li fr-original-style="" style="box-sizing: border-box;">Qualitative visualisation techniques (smoke release/&rsquo;dust lamp&rsquo; etc).</li><li fr-original-style="" style="box-sizing: border-box;">Quantitative measurement techniques (anemometers, Pitot tubes etc).</li></ul>

OXYL8 Ltd

Energy Performance Certificate

Professional Skills Course (PSC)

Local Exhaust Ventilation (LEV)

FA Level 1

P600 is an introductory one-day LEV course

P600 LEV Methods for Testing Performance

P600 LEV 1 Day Course

<div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">This course is for those who would like to start a business as a Colour Consultant. The course is designed for trainees worldwide and is delivered over five colour modules plus one marketing module, each lasting four hours. Including homework, the complete course will take up approximately 30 hours of your time.There are no prerequisites for signing up for this course, we will take you through all the theory and practical sessions, building your knowledge and confidence in the subjects.Our virtual approach to training means that you really do have the best seat in the house!All of the sessions are conducted &lsquo;live&rsquo; and online by your Colour Me Beautiful trainer. Classes are kept deliberately small to enhance your learning; maximum number 4.Immediately after your virtual training you will have the flexibility to run your own&nbsp;Colour Me Beautiful&nbsp;business as a colour consultant, meaning you can start to earn money straight away.<div style="color: rgb(10, 10, 10); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(10, 10, 10);"><h5 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">TOPICS</h5></div><div style="color: rgb(10, 10, 10); box-sizing: border-box;" fr-original-style=" color: rgb(10, 10, 10);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">The History of Colour Me Beautiful</li><li fr-original-style="" style="box-sizing: border-box;">The Colour Me Beautiful System</li><li fr-original-style="" style="box-sizing: border-box;">Dominant Colour Types</li><li fr-original-style="" style="box-sizing: border-box;">Understanding colour terms</li><li fr-original-style="" style="box-sizing: border-box;">Draping techniques for women &amp; men</li><li fr-original-style="" style="box-sizing: border-box;">Practise on volunteers</li><li fr-original-style="" style="box-sizing: border-box;">Cosmetic colour selection and application</li><li fr-original-style="" style="box-sizing: border-box;">Conducting a consultation</li><li fr-original-style="" style="box-sizing: border-box;">Setting up and marketing your business</li><li fr-original-style="" style="box-sizing: border-box;">How to conduct group presentations</li></ul>As well as training in colour, we also include business and marketing, sales and presentation skills, along with ongoing training to enhance your skills.</div><div style="color: rgb(10, 10, 10); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(10, 10, 10);"><h5 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">By the end of this course you will</h5></div><div style="color: rgb(10, 10, 10); box-sizing: border-box;" fr-original-style=" color: rgb(10, 10, 10);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Be confident in assessing the dominant colouring using the Colour Me Beautiful system</li><li fr-original-style="" style="box-sizing: border-box;">Be able to conduct a colour analysis using the dominant colours</li><li fr-original-style="" style="box-sizing: border-box;">Be confident in applying a simple make-up routine to your client</li><li fr-original-style="" style="box-sizing: border-box;">Have the required knowledge to market your business</li><li fr-original-style="" style="box-sizing: border-box;">Understand the Colour Me Beautiful back office procedures</li></ul>You will receive</div><div style="color: rgb(10, 10, 10); box-sizing: border-box;" fr-original-style=" color: rgb(10, 10, 10);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">20 hours of live online colour tuition with your tutor</li><li fr-original-style="" style="box-sizing: border-box;">4 hours live online business &amp; marketing training</li><li fr-original-style="" style="box-sizing: border-box;">Starter Kit</li><li fr-original-style="" style="box-sizing: border-box;">Comprehensive training manual</li><li fr-original-style="" style="box-sizing: border-box;">Certificate upon completion</li><li fr-original-style="" style="box-sizing: border-box;">Trade account</li><li fr-original-style="" style="box-sizing: border-box;">Access to the consultant support forum</li><li fr-original-style="" style="box-sizing: border-box;">Access to consultant lounge</li><li fr-original-style="" style="box-sizing: border-box;">International directory listing</li><li fr-original-style="" style="box-sizing: border-box;">12 months Colour Me Beautiful licence upon course completion</li></ul></div></div><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"> </div>

Colour Me Beautiful

Beauty Specialist

Color Theory

Cosmetics

Beauty & Makeup

Beauty Therapy

Learn the foundation to colour analysis with this 5 day live and online, interactive course

Intermediate Colour Analysis

Brightcore Consultancy delivers Senior Mental Health Lead training in schools and colleges which meets the Department for Education&rsquo;s quality criteria, and our course is in fact the highest rated of all the nationally DfE approved Senior Mental Health Lead training courses, scoring a perfect 5/5 in each of the 9 DfE quality assurance standards during the quality assurance process. It also has an incredible average delegate rating of 4.97 out of 5 for overall quality, with 100% of former delegates recommending the course (please see our many fantastic testimonials&nbsp;<a href="https://www.brightcoreconsultancy.com/brightcore-testimonials" target="_self" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">here</a>).The highly acclaimed Senior Mental Health Lead Training and Certificate is an extensive and authoritative training course that ensures schools/colleges have the most comprehensive, effective and financially viable whole-school/college approach to mental health and wellbeing in place. Since September 2021, this course has been fully funded by the DfE for eligible schools&nbsp;and colleges. Schools and Colleges that are ineligible for the grant are, of course, more than welcome to enrol on the course but will need to self-fund their place.Working with an&nbsp;expert trainer and a highly experienced Senior Mental Health Lead, who has&nbsp;trained Senior Mental Health Leads in over 1000 schools and colleges nationwide, you will be introduced to the DfE&rsquo;s requirements for the role of the DSMHL, and learn proven, long-term, evidence-based strategies to create, lead and promote a dynamic, bespoke mental health and wellbeing approach for your setting.<ul style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"><li fr-original-style="" style="box-sizing: border-box;">Our course consists of three days of live instructor-led training as well as an additional 1-2-1 review and coaching session, and costs&nbsp;&pound;520+VAT per delegate.&nbsp;(For schools and colleges who have already completed the training with us and now wish to train further colleagues, we offer a&nbsp;subsidised rate for additional delegates of &pound;390+VAT&nbsp;- please just email us if this is an offer you would like to take up.)</li><li fr-original-style="" style="box-sizing: border-box;">Places are limited to a maximum of 15 delegates per course to ensure high quality, bespoke training.</li><li fr-original-style="" style="box-sizing: border-box;">An overview of the course structure can be found&nbsp;<a href="https://www.brightcoreconsultancy.com/_files/ugd/5bc70a_c7b3efd99188442fa7d20449bb8fd0ec.pdf" target="_blank" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">here.</a></li></ul>Our Course is suitable for those who are new to the role of Senior Mental Health Lead or those who are looking to take on this role in the near future, and is designed to meet the DfE&rsquo;s&nbsp;<a href="https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/995681/Learning_outcomes_for_senior_mental_health_leads_in_schools_and_colleges.pdf" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">Learning Outcomes for Senior Mental Health Leads</a>&nbsp;by developing and supporting their knowledge and understanding of how to design, implement and sustain an effective whole school/college approach in accordance with the eight key principles as set out by Public Health England.<a href="https://www.brightcoreconsultancy.com/brightcore-testimonials" target="_blank" style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: rgb(255, 255, 255); font-weight: bold; text-decoration: none; border-radius: 5px; background-color: rgb(61, 86, 224); border-width: 12px 18px; border-style: solid; border-color: rgb(61, 86, 224); display: inline-block; user-select: auto; box-sizing: border-box; cursor: pointer;" rel="noopener noreferrer" fr-original-style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: #ffffff; font-weight: bold; text-decoration: none; border-radius: 5px; background-color: #3D56E0; border-top: 12px solid #3D56E0; border-bottom: 12px solid #3D56E0; border-right: 18px solid #3D56E0; border-left: 18px solid #3D56E0; display: inline-block;" fr-original-class="wysiwyg_bold_link_cls">View all testimonials </a>

Brightcore Consultancy delivers Senior Mental Health Lead training in schools and colleges which meets the Department for Education’s quality criteria, and our course is in fact the highest rated of all the nationally DfE approved Senior Mental Health Lead training courses, scoring a perfect 5/5 in each of the 9 DfE quality assurance standards during the quality assurance process. It also has an incredible average delegate rating of 4.97 out of 5 for overall quality, with 100% of former delegates recommending the course (please see our many fantastic testimonials here).
The highly acclaimed Senior Mental Health Lead Training and Certificate is an extensive and authoritative training course that ensures schools/colleges have the most comprehensive, effective and financially viable whole-school/college approach to mental health and wellbeing in place. Since September 2021, this course has been fully funded by the DfE for eligible schools and colleges. Schools and Colleges that are ineligible for the grant are, of course, more than welcome to enrol on the course but will need to self-fund their place.
Working with an expert trainer and a highly experienced Senior Mental Health Lead, who has trained Senior Mental Health Leads in over 1000 schools and colleges nationwide, you will be introduced to the DfE’s requirements for the role of the DSMHL, and learn proven, long-term, evidence-based strategies to create, lead and promote a dynamic, bespoke mental health and wellbeing approach for your setting.
Our course consists of three days of live instructor-led training as well as an additional 1-2-1 review and coaching session, and costs £520+VAT per delegate. (For schools and colleges who have already completed the training with us and now wish to train further colleagues, we offer a subsidised rate for additional delegates of £390+VAT - please just email us if this is an offer you would like to take up.)
Places are limited to a maximum of 15 delegates per course to ensure high quality, bespoke training.
An overview of the course structure can be found here.
Our Course is suitable for those who are new to the role of Senior Mental Health Lead or those who are looking to take on this role in the near future, and is designed to meet the DfE’s Learning Outcomes for Senior Mental Health Leads by developing and supporting their knowledge and understanding of how to design, implement and sustain an effective whole school/college approach in accordance with the eight key principles as set out by Public Health England.
View all testimonials



Brightcore Consultancy

Mental Health

Brightcore Consultancy delivers Senior Mental Health Lead training in schools and colleges which meets the Department for Education’s quality criteria, and our course is in fact the highest rated of all the nationally DfE approved Senior Mental Health Lead training courses, scoring a perfect 5/5 in each of the 9 DfE quality assurance standards during the quality assurance process.

Designated Senior Mental Health Lead Course (Three full days plus 1-2-1 session)

This official BRCGS one-day course will provide you with a thorough understanding of vulnerability assessment for food fraud and enable you to use techniques to better identify and mitigate risks associated to raw materials in the supply chain. This is particularly useful when implementing product safety management systems and the requirements of the BRCGS Global Standards on site.This course is part of the<a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">&nbsp;BRCGS Professional recognition programme</a>.Note: An optional 2 hours module about <a href="https://ask-sonia-limited.cademy.co.uk/accredited-threat-management-taccp-2-3-hours" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; color: inherit; cursor: pointer; text-decoration: inherit;">Threat Management (TACCP)</a> is available as a bolt-on to this course. At the end of the course, you will:<ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;">Understand vulnerability assessment requirements for BRCGS</li><li fr-original-style="" style="box-sizing: border-box;">Understand what is meant by the term &#39;food fraud&#39;</li><li fr-original-style="" style="box-sizing: border-box;">Be able to identify the difference between vulnerability assessment, threat analysis critical control point and food defence</li><li fr-original-style="" style="box-sizing: border-box;">Be able to assess the raw materials most vulnerable to food fraud</li></ul>

Ask Sonia Limited

Food Safety

HACCP

Official BRCGS Product Safety Management course: Vulnerability Assessment for Food Fraud. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner.
Exam and Certificate fee included in the price.

BRCGS Vulnerability Assessment for Food Fraud (1 Day)

Bristol

Exeter

London

Newcastle

Manchester

Liverpool

Birmingham

<h1 id="isPasted" style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Online MHFA England Adult Mental Health First Aid Course.&nbsp;</h1><div fr-original-style="" style="box-sizing: border-box;"><a href="https://www.mindmapswellbeing.com/brochure-request/" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Download brochure for course details here.</a><a href="https://www.mindmapswellbeing.com/_webedit/uploaded-files/All%20Files/Online%20Mental%20Health%20First%20Aid.pdf" rel="noopener noreferrer" target="_blank" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">&nbsp;</a>&nbsp;</div><div fr-original-style="" style="box-sizing: border-box;"> </div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">This online version of the mental health first aid course will offer the same learning outcomes as the face to face training, and every person who completes the course will be certified as a Mental Health First Aider. &nbsp;The Online Mental Health First Aid course is a blended approach of individual learning and four instructor-led live sessions, hosted on a new Online Learning Hub. &nbsp;As a training course, Mental Health First Aid teaches people how to identify, understand and help someone who may be experiencing a mental health issue. The organisation&#39;s courses and resources also promote self-care as a vital way for people to help protect their mental health and prevent issues from getting worse. &nbsp;As with all our courses at Mindmaps Wellbeing, your course will be delivered by a Registered Mental Health Nurse, MHFA England Instructor and Open University Associate Lecturer and Practice Tutor experienced in remote teaching. Our live online learning will also include an assistant who is a MHFAider. &nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"> </div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Our fee is &pound;300pp Groups of 5+ contact <a href="mailto:info@mindmapswellbeing.com" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">info@mindmapswellbeing.com</a>&nbsp;for reduced group fees.&nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"> </div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Live instructor led sessions;&nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">10:00 &ndash; 12:30 &amp; 14:30 &ndash; 17:00 both days&nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Individual learning modules around these times. You will gain access to this on the Friday before your course start date.</div>Why choosing Mindmaps Wellbeing is a good choice for your training.The MHFA England RRP is &pound;325pp, our rate is &pound;300pp and our fee includes:✅ Instructor led training sessions over two days✅ Course Manual✅ Workbook✅ Handy Cue Card✅ MHFAider Certificate upon completionPlus, exclusively when you choose Mindmaps Wellbeing, it also includes:✅ Your instructors are Registered Mental Health Nurses and Healthcare Educators (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).✅ Access to our online MHFAider peer support groups moderated by the instructor team.✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.✅ Advanced Delegate Plan &ndash; This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.&nbsp;For a little extra:&nbsp;✅ Quarterly Facilitated MHFAider Forum &ndash; to provide ongoing expert support and guidance.&nbsp;✅ Organisational MINDWELL Companion tailored for your workplace / organisation.

Online MHFA England Adult Mental Health First Aid Course. 
Download brochure for course details here.  This online version of the mental health first aid course will offer the same learning outcomes as the face to face training, and every person who completes the course will be certified as a Mental Health First Aider. The Online Mental Health First Aid course is a blended approach of individual learning and four instructor-led live sessions, hosted on a new Online Learning Hub. As a training course, Mental Health First Aid teaches people how to identify, understand and help someone who may be experiencing a mental health issue. The organisation's courses and resources also promote self-care as a vital way for people to help protect their mental health and prevent issues from getting worse. As with all our courses at Mindmaps Wellbeing, your course will be delivered by a Registered Mental Health Nurse, MHFA England Instructor and Open University Associate Lecturer and Practice Tutor experienced in remote teaching. Our live online learning will also include an assistant who is a MHFAider. Our fee is £300pp Groups of 5+ contact info@mindmapswellbeing.com for reduced group fees. Live instructor led sessions; 10:00 – 12:30 & 14:30 – 17:00 both days Individual learning modules around these times. You will gain access to this on the Friday before your course start date.
Why choosing Mindmaps Wellbeing is a good choice for your training.
The MHFA England RRP is £325pp, our rate is £300pp and our fee includes:
✅ Instructor led training sessions over two days
✅ Course Manual
✅ Workbook
✅ Handy Cue Card
✅ MHFAider Certificate upon completion
Plus, exclusively when you choose Mindmaps Wellbeing, it also includes:
✅ Your instructors are Registered Mental Health Nurses and Healthcare Educators (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).
✅ Access to our online MHFAider peer support groups moderated by the instructor team.
✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.
✅ Advanced Delegate Plan – This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.
 
For a little extra: 
✅ Quarterly Facilitated MHFAider Forum – to provide ongoing expert support and guidance. 
✅ Organisational MINDWELL Companion tailored for your workplace / organisation.

Mindmaps Wellbeing

Health & Wellbeing

Occupational Health & Wellbeing

Accredited Mental Health First Aid

Mental Health At Work

Mental Health Nurse

Online MHFA England mental health first aid course delivered by Registered Mental Health Nurses from Mindmaps Wellbeing. 

Why choosing Mindmaps Wellbeing is a good choice for your mental health training.
The MHFA England RRP is £325pp, our rate is £300pp and our fee includes:
✅ Instructor led training sessions over two days 
✅ Course Manual
✅ Workbook
✅ Handy Cue Card
✅ MHFAider Certificate upon completion
Plus, exclusively when you choose Mindmaps Wellbeing, it also includes:

✅ Your instructors are Registered Mental Health Nurses and Healthcare Educators (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).

✅ Access to our online MHFAider peer support groups moderated by the instructor team.

✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.

✅ Advanced Delegate Plan – This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.

For a little extra: 

✅ Quarterly Facilitated MHFAider Forum – to provide ongoing expert support and guidance. 

✅ Organisational MINDWELL Companion tailored for your workplace / organisation.


2431 Courses near Settle

Certified Wireless Network Administrator

By Systems & Network Training

Oracle database administration

By Systems & Network Training

CCNA

By Systems & Network Training

MySQL server administration

By Systems & Network Training

Definitive IP routing for engineers

By Systems & Network Training

Linux engineer certification 1 (LPIC-2)

By Systems & Network Training

Cloud deployment

By Systems & Network Training

Total BGP for engineers

By Systems & Network Training

Security+

By Systems & Network Training

CWISA Wireless IoT Solutions Administrator

By Systems & Network Training

Search By Location