Nottinghamshire

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates who are already qualified to operate telescopic handlers and require knowledge and practical skills to transport suspended loads safely and correctly.&nbsp;This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 2 daysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N138 Telescopic Handler Suspended LoadsIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Be able to conform to manufacturers requirements as per technical data, conform to relevant regulations and legislation ➢ Be able to locate, identify and explain safe working loads, lifting capacity chart and explain how the manufacturer may reduce the lifting capacity when moving a suspended load, different lifting configurations and working ranges ➢ Identify and explain different lifting procedures, explain what task could fall into each category ➢ Identify and explain centres of gravity and calculate estimated weights of loads ➢ Identify any overhead / proximity hazards ➢ Be able to agree the signal codes / hand signals, direction of movement, safe working and safe landing placement zone with the slinger / signaller ➢ Ensure telescopic handler is in a safe condition and attachments fitted correctly ➢ Checked load integrity and security ➢ Be able to lift and move a load to a designated position in a safe and controlled manner, ensuring minimum uncontrolled movement ➢ Environmental considerations ➢ Carry out all out of service and securing procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Dynamic Training and Assessments Ltd

Construction

CSCS (Construction Skills Certification Scheme)

NPORS

NPORS Telescopic Handler Suspended Loads (N138)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate micro 360 excavator to excavate and load materials. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 10 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category Excavator Micro (Up to 1 Tonne)It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify steering, driving and braking controls and explain their functions ➢ Identify and maintain PPE appropriate for micro excavator use ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Safely mount and dismount the machine ➢ Start and stop the engine and safely move the machine off and stop it safely ➢ Configure the machine for travel and manoeuvre it safely across varying terrain in open and confined areas ➢ Conduct all necessary safety checks at the work area ➢ Manoeuvre the machine to the work area and correctly configure in readiness to carry out excavating tasks ➢ Carry out excavating tasks ➢ Load material onto transporting vehicles or into containers ➢ Reinstate excavation, grade and level ground ➢ Fit and remove attachments ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Excavator Micro (up to 1 Tonne) (N016)

Who should attend&nbsp;Our NPORS Abrasive Wheels course is intended for those who operate, supervise or manage the use of abrasive wheels.&nbsp; Course information&nbsp;The aim of this course is to provide staff with sufficient knowledge to use and maintain abrasive wheel equipment safely, covering:&nbsp;&bull; Health and safety legislation overview&nbsp;&bull; Hazards and risk control measures associated with Abrasive Wheels&nbsp;&bull; PPE&nbsp;&bull; Types of abrasive wheel machines and their safe use&nbsp;&bull; Resin &amp; vitrified bonded abrasive wheel selection, marking, identification and inspection&nbsp;&bull; Correct use, setting, adjustment and inspection of flanges, guards and accessories&nbsp;&bull; Pre-use machine safety checks&nbsp;&bull; How to mount of abrasive wheels on various equipment including hand angle grinder, saws and bench grinders&nbsp;&bull; Set up and safe working of applying an Abrasive Wheel to a grinder&nbsp;&bull; Practical safe set up (no live cutting or grinding)&nbsp;Entry Requirements&nbsp;For learners that require the &#39;HS&amp;E TESTED Logo&#39; displayed on their card they must have passed the CITB Operatives Health, Safety and Environment Test within the last 2 years. Good understanding of spoken and written English.

NPORS Abrasive Wheels Awareness (N301A)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers (mini) to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N139 Forward tipping mini dumperIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for forward tipping mini dumper use ➢ Conduct all necessary safety checks at the work area ➢ Prepare the forward tipping mini dumper for use and operate safely and efficiently ➢ Attachments set correctly ready for operation ➢ Environmental considerations ➢ Storage and transport of forward tipping mini dumper / implements / attachments ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Forward Tipping Mini Dumper (N139)

COURSE INFORMATIONTo provide knowledge and understanding in the following areas:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Name and explain the purpose of principle components, the basic construction, controls and terminology</li><li fr-original-style="" style="box-sizing: border-box;">Conform with manufacturers requirements as per the operators handbook, and relevant regulations and legislation</li><li fr-original-style="" style="box-sizing: border-box;">Undertake all pre-use checks</li><li fr-original-style="" style="box-sizing: border-box;">Configure and ready for travel</li><li fr-original-style="" style="box-sizing: border-box;">Travel the crane to an area of work</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre in confined spaces</li><li fr-original-style="" style="box-sizing: border-box;">Configure the crane for lifting duties</li><li fr-original-style="" style="box-sizing: border-box;">Explain rigging and de-rigging procedures when fitting a lattice-type extension</li><li fr-original-style="" style="box-sizing: border-box;">Explain actions required for hazards, underground and overhead services</li><li fr-original-style="" style="box-sizing: border-box;">Programme/set-up rated capacity indicators for lifting duties</li><li fr-original-style="" style="box-sizing: border-box;">Lift various loads using the full radius and slewing capabilities of a crane</li><li fr-original-style="" style="box-sizing: border-box;">Accurately place loads, Minimise the swinging of loads</li><li fr-original-style="" style="box-sizing: border-box;">Change falls of rope on a hook block</li><li fr-original-style="" style="box-sizing: border-box;">Move loads through machine travel and comply with signals and instructions</li><li fr-original-style="" style="box-sizing: border-box;">Maintain safe working situations</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the crane in preparation of movement from lifting duties</li><li fr-original-style="" style="box-sizing: border-box;">Carry out shut down and securing procedures</li><li fr-original-style="" style="box-sizing: border-box;">Explain loading and unloading procedures for machine transporting</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2>Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.Good understanding of spoken and written English.

NPORS Crawler Crane (N103)

<h3 style="color: rgb(102, 102, 102); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(102, 102, 102);">COURSE OBJECTIVES</h3>&bull;&nbsp;Have a managerial understanding of the industry, the dangers of working in the industry and their roles and responsibilities for performing rigging and fleeting loads tasks &bull;&nbsp;Have an underpinning knowledge of the manufacturers handbooks or guidelines for the equipment to be used and have an understanding of P.U.W.E.R, L.O.L.E.R, Working at &bull;&nbsp;Height, Manual Handling, Risk Assessments with a good awareness of British and International standards &bull;&nbsp;Be able to calculate weights and measures ensuring that the load weight is accurate and all &bull;&nbsp;CoG&rsquo;s, angles, tensions are within the manufacturers guidelines for the safe rigging and fleeting of loads &bull;&nbsp;Prepare risk assessments for rigging and fleeting loads that covers basic, intermediate and complex categories &bull;&nbsp;Be able to correctly check the certification for lifting equipment appliances and accessories and understand the commonly used tools, access egress items and PPE only used definitions of the industry &bull;&nbsp;Correctly determine lifting equipment for the lift plan rigging and material lists including specific hand tools. Prepare a step by step method statement detailing a safe systematic approach including the pickup point, route to be travelled and laydown area &bull;&nbsp;Allocate team roles and responsibilities for riggers, supervisors and fixed appliance operators that can be utilized for scenarios covering basic, intermediate and complex categories &bull;&nbsp;Prepare a sketch, scaled drawing or have the understanding how to add pictures to lift plans ensuring the lift team understands the location and system of the operation in addition to text information &bull;&nbsp;Oversee tasks for complex rigging and fleeting operations ensuring the team safely follow the step by step method statement in the lift plan pack &bull;&nbsp;Liaise with the management, supervisors and workforce levels of lifting operations by attending meetings, TBT&rsquo;s, PTW meetings, site visits in a responsible competent manner &bull;&nbsp;Participation in debrief meeting with lift team and discuss lessons learned during specific task<h3 style="color: rgb(102, 102, 102); box-sizing: border-box;" fr-original-style=" color: rgb(102, 102, 102);">WHO SHOULD ATTEND?</h3>This Rigging and Fleeting Loads &ndash; Lift Planner course is designed for Plant Operators who require practical and theory training and / or assessment on a Rigging and Fleeting Loads &ndash; Lift Planner

NPORS Rigging and Fleeting Loads Lift Planner (N046)

Who should attend&nbsp;This course is aimed at people who require the knowledge and practical skills needed to enable them to safely operate and maintain a Multi Directional Lift Truck. We will conduct a learner analysis to identify the duration of training required for those with limited or no experience, whereas experienced operators can attend a one day Experienced Worker Assessment (Test Only).&nbsp;Course information Overview&nbsp;To provide knowledge and understanding in the following areas:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Have a basic understanding of the industry, the dangers of working in the industry and their &nbsp;responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be &nbsp;used&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;"> Be able to locate and identify driving, steering and braking controls in each travel mode and &nbsp;explain their functions</li><li fr-original-style="" style="box-sizing: border-box;"> Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative &nbsp;requirements&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Start and stop the engine and safely move the machine off and stop it safely in each travel mode</li><li fr-original-style="" style="box-sizing: border-box;"> Configure the machine for travel and maneuver it safely laden and unladen, in open and &nbsp;confined areas in each travel mode</li><li fr-original-style="" style="box-sizing: border-box;"> Conduct all necessary safety checks at the work area&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Maneuver the machine to the work area and correctly configure in readiness to carry out &nbsp;lifting and load handling tasks using each travel mode as appropriate</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;"> Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;"> Load and unload external transport safely&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;"> Demonstrate knowledge and understanding of loading and unloading procedures for machine &nbsp;transportation&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures&nbsp;</li></ul>Entry Requirements&nbsp;For learners applying for the NPORS CSCS Card, or for those requiring the &#39;HS&amp;E TESTED Logo&#39; displayed on their card they must have passed the CITB Operatives Health, Safety and Environment Test within the last 2 years. Good understanding of spoken and written English. Assessment NPORS Theory assessment made up of open questions and multiple choice. NPORS Practical assessment.

NPORS Multi Directional Lift Truck (N135)

<div style="color: rgb(0, 48, 87); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 48, 87);"><h2 style="color: rgb(0, 48, 87); box-sizing: border-box;" fr-original-style=" color: rgb(0, 48, 87);">Overview</h2></div><div style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">This course will give you foundation training and assessment in operating and maintaining Marine Knuckle Boom Cranes and is suitable if you have received no formal instruction or, if you wish to refresh your skills, we offer a short duration course. &nbsp;</div><div style="color: rgb(0, 48, 87); box-sizing: border-box;" fr-original-style=" color: rgb(0, 48, 87);"><h2 style="color: rgb(0, 48, 87); box-sizing: border-box;" fr-original-style=" color: rgb(0, 48, 87);">Learning outcomes</h2></div><div style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">By the end of this training course, the learner will be able to answer questions on and perform the following:<ul style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><li style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Have a basic understanding of offshore crane lifting operations, the dangers of working in the industry and their responsibilities as an operator&nbsp;</li></ul><ul style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><li style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used&nbsp;</li></ul><ul style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><li style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Be able to interpret the requirements of the lift plan and risk assessment&nbsp;</li></ul><ul style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><li style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Be able to locate and identify the major components of the machine and explain their functions&nbsp;</li></ul><ul style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><li style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Be able to locate and identify key controls and explain their functions&nbsp;</li></ul><ul style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><li style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Set up exclusion zone explaining actions required for emergency actions and identify any hazards&nbsp;</li></ul><ul style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><li style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Identify and maintain PPE appropriate for knuckle boom crane use&nbsp;</li></ul><ul style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><li style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Conduct all pre-operational and running checks in accordance with manufacturer&rsquo;s and legislative requirements&nbsp;</li></ul><ul style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><li style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Identify and inspect suitability of landing area&nbsp;</li></ul><ul style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><li style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Prepare the knuckle boom crane for lifting duties as well as over side lifts.&nbsp;</li><li style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Operate machinery safely and efficiently taking into consideration sea uplift and moving vessel decks&nbsp;</li></ul><ul style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><li style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Environmental considerations&nbsp;</li></ul><ul style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><li style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Carry out all end of work and shut down procedures.&nbsp;</li></ul>&nbsp;</div><div style="color: rgb(0, 48, 87); box-sizing: border-box;" fr-original-style=" color: rgb(0, 48, 87);"><h2 style="color: rgb(0, 48, 87); box-sizing: border-box;" fr-original-style=" color: rgb(0, 48, 87);">Assessment</h2></div><div style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">The course is delivered through a combination of practical&#39;s and classroom-based tutorials. You will be assessed through theory and practical tests.&nbsp;</div><div style="color: rgb(0, 48, 87); box-sizing: border-box;" fr-original-style=" color: rgb(0, 48, 87);"><h2 style="color: rgb(0, 48, 87); box-sizing: border-box;" fr-original-style=" color: rgb(0, 48, 87);">Entry requirements</h2></div><div style="color: rgb(51, 51, 51); box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">You must have a good understanding of spoken and written English. Please contact us if you have any concerns in this area.If you require your NPORS Operator Card to include the CSCS logo, you must have passed a CITB Health, Safety and Environment (HS&amp;E) test no more than two years before attending this course.</div>

NPORS Marine Knuckle Boom Crane (N014)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills to use suction excavators to excavate ground where utilities services are located. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 5 daysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N021 Suction ExcavatorIt is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a suction excavator operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular suction excavator to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for suction excavator use ➢ Explain the different types of suction excavators their advantages and disadvantages when excavating material ➢ Safely mount and dismount the machine ➢ Start and stop the engine, compressor and suction hoses safely and efficiently ➢ Be able to demonstrate how to safely and efficiently use the remote control ➢ Configure the machine for travel and manoeuvre it safely to the work position in open and confined areas ➢ Conduct all necessary safety checks at the work area ➢ Manoeuvre the machine to the work area and correctly configure in readiness to carry out excavating tasks ➢ Demonstrate an emergency stop explaining all relevant safety precautions ➢ Carry out excavating tasks ➢ Fit and remove different attachments ➢ Explain and demonstrate how to deposit material from the suction excavator safely and efficiently ➢ Environmental considerations ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Suction Excavator (N021)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills operate to operate a Concrete Pump safely and efficiently.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify key controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for concrete pump use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the concrete pump for use and operate machinery safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Complete safe un-blocking and re-connecting procedures</li><li fr-original-style="" style="box-sizing: border-box;">Prepare the concrete pump for cleaning and carry out cleaning tasks safely and efficiently</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Store and transport implements and attachments</li><li fr-original-style="" style="box-sizing: border-box;">Carry out end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

NPORS Concrete Pump (N211)

This&nbsp;live virtual Business Agility Foundations (ICP-BAF) training &amp; certification program&nbsp;enables the participants to learn:1. How to Adapt to Business Needs: Participants gain the ability to quickly adapt to changing business requirements, ensuring they can effectively respond to market changes and challenges.2. Opportunity Identification Skills: Participants are equipped with the skills necessary to identify and leverage potential opportunities for enhancing business systems and delivering better business value.3. Transformation of Management Models: The program provides insights on how to transform traditional management and corporate governance models into modern frameworks that prioritize agility.4. Business Agility Mindset Building: It aims to cultivate a mindset focused on business agility, emphasizing the importance of agile principles in the context of business operations.5. Frameworks, Tools, and Techniques: Participants are introduced to various frameworks, tools, and techniques essential for implementing and maintaining business agility within an organization.6. Coverage of a Broad Range of Topics: The training covers a wide spectrum of topics, including Leadership, Lean System Thinking, Network Organization, Developing People, Managing Change, and Design Thinking. <ul fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li id="isPasted" fr-original-style="" style="box-sizing: border-box;">Leadership for Agility: Learn to lead with flexibility, fostering an environment where innovation thrives.</li><li id="isPasted" fr-original-style="" style="box-sizing: border-box;">Lean System Thinking: Understand how to streamline processes for maximum efficiency and value delivery.</li><li style="color: rgb(243, 121, 52); box-sizing: border-box;" fr-original-style="color: rgb(243, 121, 52);">Network Organization: Discover how to leverage the power of networked teams and communication for enhanced collaboration and results.</li><li fr-original-style="" style="box-sizing: border-box;">Developing People: Focus on building and nurturing a team capable of driving and sustaining agility.</li><li fr-original-style="" style="box-sizing: border-box;">Managing Change: Master the strategies for managing change effectively, ensuring your organization remains resilient and responsive.</li><li fr-original-style="" style="box-sizing: border-box;">Design Thinking: Embrace customer-centric problem solving to create solutions that genuinely meet user needs and stand out in the market.</li></ul></ul>7. The Blend of Theory and Practice: Through a combination of case studies and theoretical knowledge, the program prepares participants to apply their skills as effective agility practitioners in real-world business scenarios.8. Certification Achievement: Upon successful completion, participants are awarded the ICP-BAF certification, recognizing their understanding and capability to foster business agility.Bonus Module: Enhancing Business Agility with AI &amp; Analytics:&nbsp;This bonus section covers how artificial intelligence (AI) and analytics can boost business agility. It explains how these technologies simplify decision-making, automate tasks, and analyze data to improve agile practices. Participants will learn about the practical uses of AI and analytics in making businesses more innovative and efficient, with real-world examples from agile environments. This module offers insights into using AI and analytics to enhance the agility of businesses.This course will be delivered through live virtual sessions via Zoom.&nbsp;There are the following dates on which you can opt for this course:<ol fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 22-23 Apr | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 16-17 May | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 24-25 Jun | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 11-12 Jul | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 5-6 Aug | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 19-20 Sep | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 7-8 Oct | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 14-15 Nov | 9 am - 5 pm GMT | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 16-17 Dec | 9 am - 5 pm GMT | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li></ol><div fr-original-style="" style="box-sizing: border-box;"><a href="https://drive.google.com/file/d/1UNdZWuOt1Sh55xk0BPGUclog8GhCiuMm/view?usp=drive_link" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Click Here</a>&nbsp;or download the detailed course brochure via the following link to make an informed decision:</div><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><div fr-original-style="" style="box-sizing: border-box;"><a href="https://drive.google.com/file/d/1UNdZWuOt1Sh55xk0BPGUclog8GhCiuMm/view?usp=drive_link" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; color: inherit; cursor: pointer; text-decoration: inherit;">https://drive.google.com/file/d/1UNdZWuOt1Sh55xk0BPGUclog8GhCiuMm/view?usp=drive_link</a>&nbsp;</div></li></ul>

ValueX2

https://www.valuex2.com/icagile-business-agility-foundations-certification-training/
https://www.linkedin.com/company/80563537/

Business Agility Foundations (ICP-BAF) Training & Certification Program | 2 days - 8 hrs/day | 9 am - 5 pm UK Time

General Admission

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Health & Safety

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Kent

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Dover

ECS Card Health & Safety Course Liverpool

ECS Card Health & Safety Course Newcastle

Edinburgh

Leicester

P600 provides delegates with the necessary skills and knowledge to improve their understanding of Performance Measurements in LEV.For many this will act as a starting point in their progression towards a career in LEV. &nbsp;P600 can be taken by newcomers to the field of LEV or by less experienced LEV personnel as part of their progression towards a Level 4 qualification, eg&nbsp;<a href="https://www.oxyl8.com/product/p601-thorough-examination-and-testing-of-local-exhaust-ventilation-lev-systems/" target="_blank" rel="noopener" style="color: rgb(10, 78, 112); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(10, 78, 112);">P601</a>&nbsp;&ndash;&nbsp;<a href="https://www.oxyl8.com/product/p604-performance-evaluation-and-management-of-local-exhaust-ventilation-systems/" target="_blank" rel="noopener" style="color: rgb(10, 78, 112); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(10, 78, 112);">P604</a>&nbsp;series). P600 is a Level 3 course.It does not confer &lsquo;competency&rsquo; on the delegate to allow them to undertake stutory examinations and tests under CoSHH Reg 9.In general terms &ndash; by attending this P600 delegates will gain knowledge and understanding of the:-<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Basic components of local exhaust ventilation systems.</li><li fr-original-style="" style="box-sizing: border-box;">Methodologies for undertaking the performance testing of LEV equipment</li><li fr-original-style="" style="box-sizing: border-box;">Qualitative visualisation techniques (smoke release/&rsquo;dust lamp&rsquo; etc).</li><li fr-original-style="" style="box-sizing: border-box;">Quantitative measurement techniques (anemometers, Pitot tubes etc).</li></ul>

OXYL8 Ltd

Energy Performance Certificate

Professional Skills Course (PSC)

Local Exhaust Ventilation (LEV)

FA Level 1

P600 is an introductory one-day LEV course

P600 LEV Methods for Testing Performance

P600 LEV 1 Day Course

<div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">This course is for those who would like to start a business as a Colour Consultant. The course is designed for trainees worldwide and is delivered over five colour modules plus one marketing module, each lasting four hours. Including homework, the complete course will take up approximately 30 hours of your time.There are no prerequisites for signing up for this course, we will take you through all the theory and practical sessions, building your knowledge and confidence in the subjects.Our virtual approach to training means that you really do have the best seat in the house!All of the sessions are conducted &lsquo;live&rsquo; and online by your Colour Me Beautiful trainer. Classes are kept deliberately small to enhance your learning; maximum number 4.Immediately after your virtual training you will have the flexibility to run your own&nbsp;Colour Me Beautiful&nbsp;business as a colour consultant, meaning you can start to earn money straight away.<div style="color: rgb(10, 10, 10); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(10, 10, 10);"><h5 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">TOPICS</h5></div><div style="color: rgb(10, 10, 10); box-sizing: border-box;" fr-original-style=" color: rgb(10, 10, 10);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">The History of Colour Me Beautiful</li><li fr-original-style="" style="box-sizing: border-box;">The Colour Me Beautiful System</li><li fr-original-style="" style="box-sizing: border-box;">Dominant Colour Types</li><li fr-original-style="" style="box-sizing: border-box;">Understanding colour terms</li><li fr-original-style="" style="box-sizing: border-box;">Draping techniques for women &amp; men</li><li fr-original-style="" style="box-sizing: border-box;">Practise on volunteers</li><li fr-original-style="" style="box-sizing: border-box;">Cosmetic colour selection and application</li><li fr-original-style="" style="box-sizing: border-box;">Conducting a consultation</li><li fr-original-style="" style="box-sizing: border-box;">Setting up and marketing your business</li><li fr-original-style="" style="box-sizing: border-box;">How to conduct group presentations</li></ul>As well as training in colour, we also include business and marketing, sales and presentation skills, along with ongoing training to enhance your skills.</div><div style="color: rgb(10, 10, 10); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(10, 10, 10);"><h5 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">By the end of this course you will</h5></div><div style="color: rgb(10, 10, 10); box-sizing: border-box;" fr-original-style=" color: rgb(10, 10, 10);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Be confident in assessing the dominant colouring using the Colour Me Beautiful system</li><li fr-original-style="" style="box-sizing: border-box;">Be able to conduct a colour analysis using the dominant colours</li><li fr-original-style="" style="box-sizing: border-box;">Be confident in applying a simple make-up routine to your client</li><li fr-original-style="" style="box-sizing: border-box;">Have the required knowledge to market your business</li><li fr-original-style="" style="box-sizing: border-box;">Understand the Colour Me Beautiful back office procedures</li></ul>You will receive</div><div style="color: rgb(10, 10, 10); box-sizing: border-box;" fr-original-style=" color: rgb(10, 10, 10);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">20 hours of live online colour tuition with your tutor</li><li fr-original-style="" style="box-sizing: border-box;">4 hours live online business &amp; marketing training</li><li fr-original-style="" style="box-sizing: border-box;">Starter Kit</li><li fr-original-style="" style="box-sizing: border-box;">Comprehensive training manual</li><li fr-original-style="" style="box-sizing: border-box;">Certificate upon completion</li><li fr-original-style="" style="box-sizing: border-box;">Trade account</li><li fr-original-style="" style="box-sizing: border-box;">Access to the consultant support forum</li><li fr-original-style="" style="box-sizing: border-box;">Access to consultant lounge</li><li fr-original-style="" style="box-sizing: border-box;">International directory listing</li><li fr-original-style="" style="box-sizing: border-box;">12 months Colour Me Beautiful licence upon course completion</li></ul></div></div><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"> </div>

Colour Me Beautiful

Beauty Specialist

Color Theory

Cosmetics

Beauty & Makeup

Beauty Therapy

Learn the foundation to colour analysis with this 5 day live and online, interactive course

Intermediate Colour Analysis

Brightcore Consultancy delivers Senior Mental Health Lead training in schools and colleges which meets the Department for Education&rsquo;s quality criteria, and our course is in fact the highest rated of all the nationally DfE approved Senior Mental Health Lead training courses, scoring a perfect 5/5 in each of the 9 DfE quality assurance standards during the quality assurance process. It also has an incredible average delegate rating of 4.97 out of 5 for overall quality, with 100% of former delegates recommending the course (please see our many fantastic testimonials&nbsp;<a href="https://www.brightcoreconsultancy.com/brightcore-testimonials" target="_self" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">here</a>).The highly acclaimed Senior Mental Health Lead Training and Certificate is an extensive and authoritative training course that ensures schools/colleges have the most comprehensive, effective and financially viable whole-school/college approach to mental health and wellbeing in place. Since September 2021, this course has been fully funded by the DfE for eligible schools&nbsp;and colleges. Schools and Colleges that are ineligible for the grant are, of course, more than welcome to enrol on the course but will need to self-fund their place.Working with an&nbsp;expert trainer and a highly experienced Senior Mental Health Lead, who has&nbsp;trained Senior Mental Health Leads in over 1000 schools and colleges nationwide, you will be introduced to the DfE&rsquo;s requirements for the role of the DSMHL, and learn proven, long-term, evidence-based strategies to create, lead and promote a dynamic, bespoke mental health and wellbeing approach for your setting.<ul style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"><li fr-original-style="" style="box-sizing: border-box;">Our course consists of three days of live instructor-led training as well as an additional 1-2-1 review and coaching session, and costs&nbsp;&pound;520+VAT per delegate.&nbsp;(For schools and colleges who have already completed the training with us and now wish to train further colleagues, we offer a&nbsp;subsidised rate for additional delegates of &pound;390+VAT&nbsp;- please just email us if this is an offer you would like to take up.)</li><li fr-original-style="" style="box-sizing: border-box;">Places are limited to a maximum of 15 delegates per course to ensure high quality, bespoke training.</li><li fr-original-style="" style="box-sizing: border-box;">An overview of the course structure can be found&nbsp;<a href="https://www.brightcoreconsultancy.com/_files/ugd/5bc70a_c7b3efd99188442fa7d20449bb8fd0ec.pdf" target="_blank" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">here.</a></li></ul>Our Course is suitable for those who are new to the role of Senior Mental Health Lead or those who are looking to take on this role in the near future, and is designed to meet the DfE&rsquo;s&nbsp;<a href="https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/995681/Learning_outcomes_for_senior_mental_health_leads_in_schools_and_colleges.pdf" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">Learning Outcomes for Senior Mental Health Leads</a>&nbsp;by developing and supporting their knowledge and understanding of how to design, implement and sustain an effective whole school/college approach in accordance with the eight key principles as set out by Public Health England.<a href="https://www.brightcoreconsultancy.com/brightcore-testimonials" target="_blank" style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: rgb(255, 255, 255); font-weight: bold; text-decoration: none; border-radius: 5px; background-color: rgb(61, 86, 224); border-width: 12px 18px; border-style: solid; border-color: rgb(61, 86, 224); display: inline-block; user-select: auto; box-sizing: border-box; cursor: pointer;" rel="noopener noreferrer" fr-original-style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: #ffffff; font-weight: bold; text-decoration: none; border-radius: 5px; background-color: #3D56E0; border-top: 12px solid #3D56E0; border-bottom: 12px solid #3D56E0; border-right: 18px solid #3D56E0; border-left: 18px solid #3D56E0; display: inline-block;" fr-original-class="wysiwyg_bold_link_cls">View all testimonials </a>

Brightcore Consultancy delivers Senior Mental Health Lead training in schools and colleges which meets the Department for Education’s quality criteria, and our course is in fact the highest rated of all the nationally DfE approved Senior Mental Health Lead training courses, scoring a perfect 5/5 in each of the 9 DfE quality assurance standards during the quality assurance process. It also has an incredible average delegate rating of 4.97 out of 5 for overall quality, with 100% of former delegates recommending the course (please see our many fantastic testimonials here).
The highly acclaimed Senior Mental Health Lead Training and Certificate is an extensive and authoritative training course that ensures schools/colleges have the most comprehensive, effective and financially viable whole-school/college approach to mental health and wellbeing in place. Since September 2021, this course has been fully funded by the DfE for eligible schools and colleges. Schools and Colleges that are ineligible for the grant are, of course, more than welcome to enrol on the course but will need to self-fund their place.
Working with an expert trainer and a highly experienced Senior Mental Health Lead, who has trained Senior Mental Health Leads in over 1000 schools and colleges nationwide, you will be introduced to the DfE’s requirements for the role of the DSMHL, and learn proven, long-term, evidence-based strategies to create, lead and promote a dynamic, bespoke mental health and wellbeing approach for your setting.
Our course consists of three days of live instructor-led training as well as an additional 1-2-1 review and coaching session, and costs £520+VAT per delegate. (For schools and colleges who have already completed the training with us and now wish to train further colleagues, we offer a subsidised rate for additional delegates of £390+VAT - please just email us if this is an offer you would like to take up.)
Places are limited to a maximum of 15 delegates per course to ensure high quality, bespoke training.
An overview of the course structure can be found here.
Our Course is suitable for those who are new to the role of Senior Mental Health Lead or those who are looking to take on this role in the near future, and is designed to meet the DfE’s Learning Outcomes for Senior Mental Health Leads by developing and supporting their knowledge and understanding of how to design, implement and sustain an effective whole school/college approach in accordance with the eight key principles as set out by Public Health England.
View all testimonials



Brightcore Consultancy

Mental Health

Brightcore Consultancy delivers Senior Mental Health Lead training in schools and colleges which meets the Department for Education’s quality criteria, and our course is in fact the highest rated of all the nationally DfE approved Senior Mental Health Lead training courses, scoring a perfect 5/5 in each of the 9 DfE quality assurance standards during the quality assurance process.

Designated Senior Mental Health Lead Course (Three full days plus 1-2-1 session)

This official BRCGS one-day course will provide you with a thorough understanding of vulnerability assessment for food fraud and enable you to use techniques to better identify and mitigate risks associated to raw materials in the supply chain. This is particularly useful when implementing product safety management systems and the requirements of the BRCGS Global Standards on site.This course is part of the<a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">&nbsp;BRCGS Professional recognition programme</a>.Note: An optional 2 hours module about <a href="https://ask-sonia-limited.cademy.co.uk/accredited-threat-management-taccp-2-3-hours" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; color: inherit; cursor: pointer; text-decoration: inherit;">Threat Management (TACCP)</a> is available as a bolt-on to this course. At the end of the course, you will:<ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;">Understand vulnerability assessment requirements for BRCGS</li><li fr-original-style="" style="box-sizing: border-box;">Understand what is meant by the term &#39;food fraud&#39;</li><li fr-original-style="" style="box-sizing: border-box;">Be able to identify the difference between vulnerability assessment, threat analysis critical control point and food defence</li><li fr-original-style="" style="box-sizing: border-box;">Be able to assess the raw materials most vulnerable to food fraud</li></ul>

Ask Sonia Limited

Food Safety

HACCP

Official BRCGS Product Safety Management course: Vulnerability Assessment for Food Fraud. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner.
Exam and Certificate fee included in the price.

2540 Courses in Leeds

NPORS Telescopic Handler Suspended Loads (N138)

By Dynamic Training and Assessments Ltd

NPORS Excavator Micro (up to 1 Tonne) (N016)

By Dynamic Training and Assessments Ltd

NPORS Abrasive Wheels Awareness (N301A)

By Dynamic Training and Assessments Ltd

NPORS Forward Tipping Mini Dumper (N139)

By Dynamic Training and Assessments Ltd

NPORS Crawler Crane (N103)

By Dynamic Training and Assessments Ltd

NPORS Rigging and Fleeting Loads Lift Planner (N046)

By Dynamic Training and Assessments Ltd

NPORS Multi Directional Lift Truck (N135)

By Dynamic Training and Assessments Ltd

NPORS Marine Knuckle Boom Crane (N014)

By Dynamic Training and Assessments Ltd

NPORS Suction Excavator (N021)

By Dynamic Training and Assessments Ltd

NPORS Concrete Pump (N211)

By Dynamic Training and Assessments Ltd

Search By Location