Name: Upstream Petroleum Economics, Risk and Fiscal Analysis
Price: 2751 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans. This course provides also a comprehensive explanation of all boiler combustion control systems including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system as well as their tuning methods. All boiler control systems are covered as well in this course including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, boiler-turbine coordinated control, etc.</p>
<p>The course provides also detailed explanation of Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code). The burner management systems (BMS) and examples of boiler permissive starting logic and protective tripping logic will be explained thoroughly. The various methods used to calculate the boiler efficiency are covered in detail in this course including the direct and indirect methods. All the factors which affect the efficiency and emissions of pulverized coal boiler and CFB boiler will be explained thoroughly.</p>
<p>The course covers also all the methods used to improve the efficiency of pulverized coal boilers and CFB boilers including improvement to their combustion efficiency and control systems performance.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Boiler Combustion Equipment and Systems:</span></strong><span> Gain an in-depth understanding of all boiler combustion equipment and systems including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans</span></li>
<li><strong><span>Boiler Combustion Control Systems:</span></strong><span> Gain a thorough understanding of all boiler combustion control systems for pulverized coal boilers, and CFB boilers including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system</span></li>
<li><strong><span>Boiler Conventional Control Systems:</span></strong><span> Gain an in-depth understanding of all boiler conventional control systems including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, and boiler-turbine coordinated control</span></li>
<li><strong><span>Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code):</span></strong><span> Learn about NFPA 85 code and ANSI/ISA-77-44-01-2007 code</span></li>
<li><strong><span>Burner Management System and Boiler Permissive Starting Logic and Protective Tripping Logic:</span></strong><span> Gain an in-depth understanding of burner management system and boiler permissive starting logic and protective tripping logic</span></li>
<li><strong><span>Boiler Efficiency Calculations:</span><span> Learn how to calculate the boiler efficiency using the direct and indirect methods</span></strong></li>
<li><strong><span>Factors Affecting the Efficiency and Emissions of Boilers: </span></strong><span>Understand all the factors which affect the boiler efficiency and emissions</span></li>
<li><strong><span>Methods Used to Improve the Efficiency of Boilers:</span></strong><span> Learn about all the methods used to improve the efficiency of pulverized coal boilers, and CFB boilers including improvement to their combustion efficiency and control systems performance</span></li>
<li><strong><span>Boiler Instrument and Piping Diagrams:</span></strong><span> Gain an in-depth understanding of all boiler instrument and piping diagrams</span></li>
<li><strong><span>CFB and Pulverized Coal Boilers Equipment and Systems:</span></strong><span> Learn about various types of equipment and systems used in CFB and pulverized coal boilers including economizers, steam drum, superheaters, air preheaters, ammonia injection systems, etc.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>COMBUSTION ENGINEERING FOR COAL FIRED POWER PLANTS MANUAL (includes practical information about combustion engineering for coal fired power plants - 550 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Combustion Engineering for Coal Fired Power Plants

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Identifying and correcting the root cause of failures in boilers and steam power plant equipment is essential to help reduce the chance of future problems. A comprehensive assessment is the most effective method of determining the root cause of a failure. For example, a tube failure in a boiler is usually a symptom of other problems. To fully understand the root cause of the failure, one must investigate all aspects of boiler operation leading to the failure in addition to evaluating the failure itself. When a boiler tube failure occurs, the root cause of the failure must be identified and eliminated.</p>
<p>This 5 full-day course starts by providing an in-depth understanding of root cause analysis methodology. This includes how to identify the problem, contain and analyze the problem, define the root cause of the problem, define and implement the actions required to eliminate the root cause, and validate that the corrective actions prevented recurrence of the problem. Many practical examples on how to apply root cause analysis for various industrial problems are discussed in detail.</p>
<p>The course then provides an in-depth explanation of all failure mechanisms that occur in steam power plants including corrosion, erosion, creep, cavitation, under-deposit attacks, stress corrosion cracking, hydrogen embrittlement, flow accelerated corrosion, etc. This course also provides a thorough explanation of all the failure mechanisms that occur in boilers and steam power plant equipment including steam turbines, condensers, feedwater heaters, etc. The symptoms of the failures, possible causes, components typically affected and solutions are also provided in this course. This includes boiler waterside, fireside and general boiler failure mechanisms as well as all the causes and prevention of all steam turbine failures, condensers, and feedwater heaters. The course also includes detailed study of many case histories of failures in boilers, steam turbines, condensers and feedwater heaters.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Electrical Equipment Testing and Maintenance: </span></strong><span>Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</span></li>
<li><strong><span>Root Cause Analysis Methodology:</span></strong><span> Understand root cause analysis methodology including: identification of the problem, defining the problem, understanding the problem, identification of the root cause of the problem, providing corrective action, and monitoring the system.</span></li>
<li><strong><span>Applying the Root Cause Analysis Method to Industrial Problems:</span></strong><span> Learn by studying many practical examples how to apply the root cause analysis method to various industrial problems.</span></li>
<li><strong><span>Damage Mechanisms in Boilers and Steam Power Plant Equipment: </span></strong><span>Gain a thorough understanding of all the damage mechanisms that occur in boilers and all steam power plant equipment including turbines, condensers and feedwater heaters. These mechanisms include corrosion, erosion, flow accelerated corrosion, stress corrosion cracking, creep, under-deposit attack, cavitation, hydrogen embrittlement, etc.</span></li>
<li><strong><span>Symptoms of Failures in Boilers and Steam Power Plant Equipment, Possible Causes, Components Typically Affected, and Solutions:</span></strong><span> Learn about all the symptoms of failures in boilers and steam power plant equipment including steam turbines, condensers, and feedwater heaters, their possible causes, components typically affected and proven solutions.</span></li>
<li><strong><span>Case Histories of Failures in Boilers, Steam Turbines, Condensers, and Feedwater Heaters:</span></strong><span> Learn by studying many case histories how failures occur in boilers, steam turbines, condensers, and feedwater heaters and the corrective actions taken to deal with them</span></li>
</ul>
<p> </p>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals (this seminar is suitable for individuals who do not have an electrical background)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2011 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>ROOT CAUSE ANALYSIS FOR BOILERS AND STEAM CYCLE FAILURES MANUAL (includes practical information and case histories - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Root Cause Analysis for Boilers and Steam Cycle Failures

Redhill

<h3><b>Junos Service Provider Switching training course description</b></h3>
        <p>   This course provides students with an overview of
switching concepts such as LANs, Layer 2 address
learning, bridging, virtual LANs (VLANs), provider
bridging, VLAN translation, spanning-tree protocols,
and Ethernet Operation, Administration, and
Maintenance (OAM). This course also covers Junos
operating system-specific implementations.
Junos Service Provider Switching is an intermediatelevel
course.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
     <li>Describe carrier Ethernet.</li>
                  <li>Describe the function of an Ethernet LAN.</li>
                  <li>Implement VLAN tagging.</li>
                  <li>Describe the components of provider bridging.</li>
                  <li>Identify and use available tools to resolve network
issues.</li>
                  <li>Configure and monitor Ethernet OAM, ERP, LAG,
STP, the RSTP, the MSTP, and the VSTP.</li>
               							 </ul>
        <h5>
        <b>Junos Service Provider Switching training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p> Individuals responsible for configuring and monitoring
devices running the Junos OS.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>Junos Intermediate Routing</p>
              
							<li><b>Duration</b></li>
							
              <p>2 days</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Junos Service Provider Switching training course contents</b></h3>
      <ul>
        <li>Ethernet Switching and Virtual LANs </li><p>
Ethernet LANs<br />
Bridging<br />
Configuring and Monitoring VLANs<br />
Automating VLAN Administration<br />
Configuring and Monitoring IRB<br />
Layer 2 Address Learning and Forwarding<br />
Layer 2 Firewall Filtering<br />
<span>Ethernet Switching and VLANs Lab</span>

</p><li>Virtual Switches </li><p>
Routing Instances Overview<br />
Configuring and Monitoring Virtual Switches<br />
Interconnecting Routing Instances<br />
Logical Systems<br />
<span>Virtual Switches Lab</span>

</p><li>Provider Bridging </li><p>
Expanding the Bridged Network<br />
Provider Bridging<br />
Configuring and Monitoring Provider Bridging<br />
<span>Provider Bridging Lab</span>

</p><li>Spanning-Tree Protocols </li><p>
Overview of STP<br />
Overview of RSTP<br />
Overview of MSTP<br />
Overview of VSTP<br />
Configuring and Monitoring Spanning-Tree Protocols<br />
Understanding BPDU, Loop, and Root Protection<br />
<span>MSTP Lab</span>

</p><li>Ethernet OAM </li><p>
OAM Overview<br />
LFM<br />
CFM<br />
Configuring and Monitoring Ethernet OAM<br />
<span>Ethernet OAM Lab</span>

</p><li>High Availability and Network Optimization </li><p>
ERP Overview<br />
Configuring and Monitoring ERP<br />
Link Aggregation Group Overview<br />
Configuring and Monitoring a LAG<br />
MC-LAG Overview<br />
Configuring and Monitoring an MC-LAG<br />
<span>High Availability and Network Optimization Lab</span>

</p><li>Troubleshooting and Monitoring </li><p>
Introduction to Troubleshooting and Monitoring<br />
Troubleshooting and Monitoring Tools<br />
Troubleshooting Case Study: Network Congestion<br />
				<span>Troubleshooting and Monitoring Lab</span>

</p><li>Appendix A: Carrier Ethernet </li><p>
Ethernet in the WAN<br />
Ethernet Standards Organizations<br />
MX Series Layer 2 Features

</p><li>Appendix B: Deprecated Syntaxes </li><p>
Appendix C: MX Series Overview
</p>
      </ul>

Systems & Network Training

Network & Security

Network Engineer

Junos Service Provider Switching

General Admission

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p>This Virtual Instructor Led Training (VILT) course is designed with the aim of showing the degree of integration necessary in developing an offshore petroleum discovery, from field appraisal to development. The 5 half-day VILT course gives a comprehensive account of the methodology, processes and techniques utilised in developing an offshore oil or gas discovery.</p>
<p>Technically, integration of expected reservoir behavior, well planning and design, and facilities concepts and selection are exemplified through detailed case histories, group discussions and exercises. Commercial aspects related to overall project evaluation are also covered.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li>Course participants will obtain a comprehensive understanding of key aspects of offshore field development, from appraisal through to development planning and leading up to sanction.</li>
<li>The VILT course covers the three key elements: reservoirs, wells and facilities, and covers the integration of these with commercial aspects, and the required management aspects, including uncertainty and risk.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course is designed for <strong>project managers, field development and planning engineers, asset managers, petroleum engineers, reservoir engineers as well as field geoscientists and managers who have an interest in or are involved in field development feasibility and planning</strong>. In particular, this VILT course would be of interest to managers leading multidisciplinary and diverse functional teams.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The VILT course will be delivered online in <strong>5 half-day sessions comprising 4 hours per day</strong>, with 2 breaks of 10 minutes per day.</p>
<p>Course Duration: 5 half-day sessions, 4 hours per session (20 hours in total).</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><strong>Trainer 1:</strong></p>
<p>Your first expert course leader is a specialist in reservoir engineering, field development planning and petroleum management. Having worked for over 40 years in the petroleum industry, his most recent full-time position was Chief Operating Officer and Project Director for AED Oil and East Puffin (2007-09) for the Puffin offshore development, Timor Sea.</p>
<p>Prior to his academic career (2001-2006), commencing in 2001 as head of the new School of Petroleum Engineering and Management at the UA, he worked for 16 years for BHP Petroleum (now BHP Billiton), most recently as Chief Reservoir Engineer for their worldwide operations. Other positions with BHP Billiton involved mainly technical and project management, and general management positions, including member of the BHP Board. He was project manager (feasibility) for two FPSO projects, the Skua and Griffin area fields, offshore Australia. He was also the Technical Manager for the Dai Hung project, offshore Vietnam where first oil was achieved in just 18 months from sanction. Before that time, he worked for Shell International (8 years) in the Netherlands, including two years as Senior Lecturer Reservoir Engineering at Shell's training centre and in Australia, seconded to Woodside Energy, with a key role in Australia's largest capital project (at the time), the Northwest Shelf Gas development. He started his career in Calgary, Canada, first with Hudson's Bay Oil and Gas and subsequently with the US consulting company, Scientific Software Corporation.</p>
<p>He holds a BSc degree in Physics from the University of British Columbia and a MS degree in Nuclear Engineering from Stanford University. He has been an active member of the Society of Petroleum Engineers, including Director for the Asia-Pacific region (1996-98) and as a member of the Board. He was an SPE Distinguished Lecturer during 2001-02 and a PESA Distinguished Lecturer during 2002. He has lectured at many institutions and was a visiting professor at Stanford University in 2000. He has published over 50 papers on both technical and managerial topics.</p>
<p>His professional interests are in optimal planning and project management of offshore petroleum discoveries. His primary research interests are in the area of special core analysis and the development of predictive models for reservoir characterisation.</p>
<p><strong>Trainer 2:</strong></p>
<p>Your other course leader is currently an independent consultant and trainer after 37 years in the upstream petroleum industry. His previous roles included Chief Geologist for GALP Energy, Consultant/ Head of Exploration for Qatar Petroleum, Technical/ Asset Manager for SASOL, and various technical and technical management roles in BHP Billiton Petroleum and Chevron.</p>
<p>He managed/ executed many projects in diverse locations: West Grimes gas field development - California; Port Arguello heavy oil development - offshore California; exploration &amp; development projects - Nigeria; Tengiz field early development, Korolev appraisal - Kazakhstan; Nkossa field development, Moho/ Bilondo exploration - offshore Congo; PNG divestment, Bayu-Undan LNG development - Australia; Ohanet acquisition, appraisal &amp; development - Algeria; Pande development, Pande/ Temane gas plant expansion &amp; near field exploration - Mozambique; Pre-Khuff (HP/HT) exploration, multiple blocks &amp; operators - Qatar; Coral/ Mamba appraisal - Mozambique; Blocks 14/32 exploration &amp; development - Angola; exploration &amp; appraisal - onshore &amp; offshore Brazil.</p>
<p>He has an MSc in Geophysics from Stanford, an MBA from St. Mary's College of California, and a BSc in Geology (Honors) from Western Illinois University. He is a member of SEG, AAPG, SPE, PESGB, and PESA and is a Fellow of the Energy Institute (UK).</p>
<p>His professional interests centre around deploying this extensive and international experience base to add value to future projects via training and consultancy, and to provide the leadership needed to execute, deliver, and ensure profitability of new projects.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Integrated Field Development Planning for Offshore Fields

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Whether you are maintaining an oil rig or processing plant, good quality maintenance is critical to delivering a safe reliable product to your customers. Whatever your level of maintenance experience, this course will equip you with the valuable skills and understanding that will enhance your maintenance career.</p>
<p>Too often the maintenance department is seen as the cause of why assets are unavailable, in poor condition yet are costing too much to maintain. By comparison, pace setting companies see maintenance as adding value to their assets and employ an integrated, holistic approach to their maintenance activities. This course will help you move towards that pace setting performance.</p>
<p>This course is based on an integrated maintenance model that has been used by leading companies and consultants with success and recognised as best practice. Participants will learn the total impact that maintenance can have on a business, identify key elements (and value) of effective maintenance for their own plants to not only reduce costs but also improve performance. The critical types of maintenance will be covered from day-to-day activities to shutdowns and reliability improvement. The course will break down traditional functional boundaries and encourage a holistic approach to maintenance.</p>
<p>With an organisation's maintenance process only as good as its weakest link, this course will guide participants through all the key steps of a maintenance process and its supply chain. Participants will understand what is considered a good standard for each step in the maintenance process, how to identify the weakest links and subsequently how they can accelerate their performance improvement.</p>
<p><strong>Participants will have the option of gaining a Bronze Level qualification from the Academy of Turnarounds Operations of Maintenance. For those who obtain a pass, they will receive a Pass certificate and for those who achieve the top quartile score, they will receive a Distinction level pass.</strong></p>
<p>This course can also be offered through Virtual Instructor Led Training (VILT) format.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By the end of the course, participants will be able to:</p>
<ul>
<li>Explain the challenges and objectives facing maintenance organisations today</li>
<li>Demonstrate the importance of work order systems and use techniques for time estimations and priority assignments</li>
<li>Prepare a preventive maintenance program</li>
<li>Apply project management techniques to effectively manage major maintenance activities and shut downs</li>
<li>Use capital budgeting techniques to evaluate maintenance capital expenditures</li>
<li>Demonstrate understanding of how to maintain the optimal stock levels of spare parts to ensure operational continuity</li>
<li>Prepare the right Key Performance Indicators (KPIs) to evaluate and improve performance in maintenance</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is not just for maintenance professionals. Maintenance teams cannot perform without effective integration with operations and supply chain functions. Availability losses are often caused by operations or design issues and pace setting companies have generated significant benefits by integrating operation and maintenance strategies and working more collaboratively. This course will help all members of the operations and maintenance teams and their supply chain better understand their respective roles in ensuring that maintenance is benefitting and not inhibiting their business.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a highly experienced facilitator in maintenance improvement, change management, continuous improvement and capability development as a management coach and trainer. He has a strong focus on people with an emphasis on developing people and the practicalities of improving maintenance performance rather than just the theory.</p>
<p>He has worked internationally across Europe, America, the Middle East and Africa with extensive experience in Oil and Gas, the Chemicals sector and manufacturing as well as working with clients in Steel and Power Generation. As a result, he can bring best practice from a wide variety of sources.</p>
<p>He spent the first fifteen years of his career as a specialist trainer working for companies such as Lloyds British Training Services and Rolls Royce. He then went on to work as a Principal consultant for ABB consulting for 15 years. During this time, he refined some of the established improvement tools including how and when to apply them for maximum impact whilst still continuing to develop and deliver training in support of this. Recent work has included improvements to the Work Order to Work Execution processes of Engineering departments and focused on Reliability, Planning and Scheduling. This ongoing field experience has helped him test and refine specialist training in a number of areas.</p>
<p>He has been able to use his own experience to contribute with other maintenance specialists to the Carcharodon models of excellence. Its methodologies are recognised as 'Best of the Best' standards providing the inspiration for two books, projects that have won awards such as the prodigious UK Chemical Industries annual Excellence in Engineering award and form the basis of this training.</p>
<p>He was recently awarded a national award as coach of the year. He uses the same skills to ensure that he does not just preach maintenance best practice, he discusses it, explains it and ensures that delegates have a much more personal and flexible experience.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Maintenance Planning, Scheduling & Control

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>The industry is surrounded with examples of poor Turnarounds, which have injured people and damaged businesses. If Turnarounds are not properly planned, managed and controlled, companies run the risks of serious safety and budget penalties, costly schedule delays and negative impacts on customers. As a consequence, operators are starting to explore Turnaround best practices and establish a more robust methodology.</p>
<p>Turnarounds are the highest risk activity that we routinely perform in the industry, but they are also an area of massive variability in approach and outcome. Central to the variability is a lack of written methodologies and training - there are around 1,000 times as many books on maintenance as there are on turnaround management. All too often companies see Turnarounds as something to be survived and therefore it is no surprise that most Turnarounds fail.</p>
<p>This 4 full-day course is based upon the Carcharodon 'Best of the Best' model of excellence for shutdown management with inputs from people who have done it from the trenches along with some of the world's most experienced shutdown specialists. All this experience has been condensed into a core methodology - our blueprint for success. It converts Turnarounds from a high-risk nuisance to a business opportunity. It has been used on multiple sites around the world, has been the basis of two books and is also supplemented by a roadmap for building and controlling a successful Turnaround.</p>
<p><strong>This is a certificate course where participants will have the option to participate for a short exam on the final day of the course to gain a <em>Certificate in Advanced Turnaround, Shutdown &amp; Outage Management </em>from petroEDGE and the Academy of Turnarounds Operations and Maintenance.</strong></p>
<p>The purpose of this course is to equip the participants on the use of the Model of Excellence for Turnarounds and the principles of Challenge Planning to equip attendees with an advanced approach to Turnaround Management. The course is backed by real situations, high levels of interaction, group exercises and multiple case studies. It will explore the underlying mechanisms and levers that shape a Turnaround to demonstrate why we sometimes succeed or fail and introduce new conceptual approaches that can increase our chances of succeeding.</p>
<p></p>
<p></p>
<p></p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, the participants will be able to:</p>
<ul>
<li>Position Turnarounds as part of an overall strategy of improving business performance.</li>
<li>Build the best Turnaround team possible from available resources.</li>
<li>Help senior management build effective steering teams.</li>
<li>Reduce the downtime associated with turnarounds while simultaneously improving safety performance.</li>
<li>Use the Model of Excellence to analyse their own performance, explain key principles to others and build a detailed methodology of their own.</li>
<li>Maximise the benefits of planning and preparation through a proactive challenge planning process where the participants will build a Turnaround from the ground up from concept to execution and review.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course has been researched and developed for Experienced Managers, Superintendents, Supervisors, Engineers, Planners, Team Leaders and Coordinators of:</p>
<ul>
<li>Shutdowns/Turnarounds</li>
<li>Maintenance</li>
<li>Engineering</li>
<li>Reliability</li>
<li>Plant</li>
<li>Outage</li>
<li>Asset Management</li>
<li>Operations/Audit</li>
<li>Safety</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a highly experienced facilitator in maintenance improvement, change management, continuous improvement and capability development as a management coach and trainer. He has a strong focus on people with an emphasis on developing people and the practicalities of improving maintenance performance rather than just the theory.</p>
<p>He has worked internationally across Europe, America, the Middle East and Africa with extensive experience in Oil and Gas, the Chemicals sector and manufacturing as well as working with clients in Steel and Power Generation. As a result, he can bring best practice from a wide variety of sources.</p>
<p>He spent the first fifteen years of his career as a specialist trainer working for companies such as Lloyds British Training Services and Rolls Royce. He then went on to work as a Principal consultant for ABB consulting for 15 years. During this time, he refined some of the established improvement tools including how and when to apply them for maximum impact whilst still continuing to develop and deliver training in support of this. Recent work has included improvements to the Work Order to Work Execution processes of Engineering departments and focused on Reliability, Planning and Scheduling. This ongoing field experience has helped him test and refine specialist training in a number of areas.</p>
<p>He has been able to use his own experience to contribute with other maintenance specialists to the Carcharodon models of excellence. Its methodologies are recognised as 'Best of the Best' standards providing the inspiration for two books, projects that have won awards such as the prodigious UK Chemical Industries annual Excellence in Engineering award and form the basis of this training.</p>
<p>He was recently awarded a national award as coach of the year. He uses the same skills to ensure that he does not just preach maintenance best practice, he discusses it, explains it and ensures that delegates have a much more personal and flexible experience.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Advanced Turnaround, Shutdown and Outage Management

Kuala Lumpur

<section style="color: rgb(33, 37, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(33, 37, 41);"><h2 style="color: rgb(62, 57, 52); box-sizing: border-box;" fr-original-style=" color: rgb(62, 57, 52);">About this Training</h2><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Carbonate sequences are extremely complex to characterize in terms of reservoir geometries and properties. Carbonate sequences are developed under the control not only of physical but also biological parameters and results in a variety of geometries that vary greatly in 3D. These intervals are also strongly affected by shallow to deep burial diagenetic process that modify the reservoir properties of the different facies and impact on the geometries and distribution of reservoir facies. Finally carbonate sequences are also often affected by fault and fracturing that strongly control the circulation of fluids within these sequences. Seismic can be often an excellent tool to map the different depositional settings and to understand the distribution, vertical and lateral variability of good reservoir intervals.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;">This course introduces to the complexity associated to carbonate sequences and the best way to characterize them using 2D and 3D seismic. Several case studies from around the world will be also shown. In each module various examples from around the world and from different tectonic settings and different carbonate depositional settings will be shown. Most of the modules will have also real case studies with 2D and 3D seismic to better explain and visualize the key concepts.</p></section><section style="color: rgb(33, 37, 41); box-sizing: border-box;" fr-original-style=" color: rgb(33, 37, 41);"><a data-toggle="collapse" href="https://petroedgeasia.net/training/seismic-interpretation-in-carbonates-classroom-training/#collapseOne" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TRAINING OBJECTIVES</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Upon completion of this course, participants will be able to:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Learn the carbonate depositional environment characterization</li><li fr-original-style="" style="box-sizing: border-box;">Explore the diagenesis and fracturing in carbonates</li><li fr-original-style="" style="box-sizing: border-box;">Improve seismic quality and impact on seismic interpretation</li><li fr-original-style="" style="box-sizing: border-box;">Recognize the differences and challenges in different tectonic settings</li><li fr-original-style="" style="box-sizing: border-box;">Know how to integrate all the data for a full picture of the reservoir</li><li fr-original-style="" style="box-sizing: border-box;">Master the prediction tool for seismic forward modelling in carbonates</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/seismic-interpretation-in-carbonates-classroom-training/#collapseTwo" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TARGET AUDIENCE</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This course is designed for those who are involved in carbonate projects during the exploration and/or appraisal and/or development stages at the regional or field scale.</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Geoscientists</li><li fr-original-style="" style="box-sizing: border-box;">Geologists</li><li fr-original-style="" style="box-sizing: border-box;">Seismic Interpreters</li><li fr-original-style="" style="box-sizing: border-box;">Geophysicists</li><li fr-original-style="" style="box-sizing: border-box;">Reservoir engineers</li><li fr-original-style="" style="box-sizing: border-box;">Exploration and Production team</li><li fr-original-style="" style="box-sizing: border-box;">Petrophysicists</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/seismic-interpretation-in-carbonates-classroom-training/#collapsecl" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">COURSE LEVEL</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Intermediate</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/seismic-interpretation-in-carbonates-classroom-training/#collapseFive" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TRAINER</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your expert course leader is a seasoned Senior Technical Advisor with an extensive track record spanning over 25 years within the upstream oil and gas industry. His remarkable journey includes serving as the Technical Director for Delta Energy and occupying crucial technical roles at renowned organizations such as TOTAL S.A. and FINA E&amp;P. His career commenced with Arco British Ltd, where he embarked on his remarkable path in the field.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Throughout his career, he has been at the forefront of multifaceted studies, contributing his expertise to every stage of the upstream process. This encompasses early exploration and basin assessment, comprehensive reservoir characterization, strategic planning and execution of seismic and drilling operations, prospect generation, initial production efforts, sophisticated reservoir modeling, and the re-evaluation of aging hydrocarbon fields and basins. His specialized focus lies in carbonates and fractured reservoirs, where his profound knowledge has been honed. His impactful projects have spanned across four continents, encompassing a diverse range of tectonic settings and sedimentary basins. Additionally, his commitment to knowledge sharing and professional development is evident through his facilitation of more than 60 technical training courses. These courses have benefitted over 950 professionals, equipping them with the tools and methodologies necessary for effective characterization of carbonate and fractured reservoirs.</p></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/seismic-interpretation-in-carbonates-classroom-training/#collapseCS" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">POST TRAINING COACHING SUPPORT (OPTIONAL)</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &ldquo;One to One&rdquo; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;"><a href="mailto:info@asiaedge.net?subject=Request%20for%20further%20information%20regarding%20post%20training%20coaching%20support" target="_blank" style="color: rgb(0, 123, 255); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 123, 255);">Request for further information post training support</a>&nbsp;and fees applicable</p></div></section>

Explore the complexities of seismic interpretation in carbonates through our dynamic classroom training course. Energyedge delivers cutting-edge instruction and valuable insights.

Seismic Interpretation in Carbonates

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course provide a comprehensive understanding of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, HART protocol, control valves, actuators, and smart technology. This course will focus on maximizing the efficiency, reliability, and longevity of these systems and equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p>
<p>This course is a MUST for anyone who is involved in the selection, applications, or maintenance of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology because it covers how these systems and equipment operate, the latest maintenance techniques, and provides guidelines and rules that ensure their successful operation. In addition, this course will cover in detail the basic design, operating characteristics, specification, selection criteria, advanced fault detection techniques, critical components and all preventive and predictive maintenance methods in order to increase the reliability of these systems andequipment and reduce their operation and maintenance cost</p>
<p>This course will provide the following information for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology:</p>
<ul>
<li>Basic Design</li>
<li>Specification</li>
<li>Selection Criteria</li>
<li>Sizing Calculations</li>
<li>Enclosures and Sealing Arrangements</li>
<li>Codes and Standards</li>
<li>Common Operational Problems</li>
<li>All Diagnostics, Troubleshooting, Testing, and Maintenance</li>
</ul>
<p>Practical applications of smart instrumentation, SCADA, and Distributed Control Systems, control valves, actuators, etc in the following industries will be discussed in detail:</p>
<ul>
<li>Chemical and petrochemical</li>
<li>Power generation</li>
<li>Pulp and paper</li>
<li>Aerospace</li>
<li>Water and sewage treatment</li>
<li>Electrical power grids</li>
<li>Environmental monitoring and control systems</li>
<li>Pharmaceutical plants</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Equipment Operation: </span></strong><span>Gain a thorough understanding of the operating characteristics of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Diagnostics and Inspection:</span></strong><span> Learn in detail all the diagnostic techniques and inspections required of critical components of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Testing:</span></strong><span> Understand thoroughly all the tests required for the various types of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Maintenance and Troubleshooting: </span></strong><span>Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Repair and Refurbishment:</span></strong><span> Gain a detailed understanding of the various methods used to repair and refurbish modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Efficiency, Reliability, and Longevity: </span></strong><span>Learn the various methods used to maximize the efficiency, reliability, and longevity of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Sizing:</span></strong><span> Gain a detailed understanding of all the calculations and sizing techniques used for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Design Features:</span></strong><span> Understand all the design features that improve the efficiency and reliability of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Selection:</span></strong><span> Learn how to select modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology by using the performance characteristics and selection criteria that you will learn in this course</span></li>
<li><span><strong>Equipment Enclosures and Sealing</strong> Methods </span><span>Learn about the various types of enclosures and sealing arrangements used for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Commissioning:</span></strong><span> Understand all the commissioning requirements for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Codes and Standards:</span></strong><span> Learn all the codes and standards applicable for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Causes and Modes of Failure:</span></strong><span> Understand the causes and modes of failure of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>System Design: </span></strong><span>Learn all the requirements for designing different types of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Industrial Instrumentation and Modern Control Systems Practical Manual (400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Industrial Instrumentation and Modern Control Systems

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control. With the growing importance of grid integration of renewables and the interest in smart grid technologies, it is more important than ever to understand the fundamentals that underpin electrical power systems.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Basic Terminology and Concepts of Electrical Systems:</strong> Gain an understanding of the basic terminology and concepts of electrical systems and the structure of a power system</li>
<li><strong>Transmission Line Parameters:</strong> Learn in detail all the transmission line parameters including line resistance, line inductance, transposition of transmission lines, and capacitance of transmission lines</li>
<li><strong>Insulators:</strong> Understand thoroughly all the various types of insulators, pin type insulators, suspension type or disc insulators, strain insulators, and testing of insulators</li>
<li><strong>High-Voltage Direct Current Transmission:</strong> Determine the advantages and disadvantages of high voltage direct current transmission, and gain an understanding of all the features of high-voltage direct current transmission</li>
<li><strong>Substations and Neutral Grounding:</strong> Gain a detailed understanding of all substation equipment, factors governing the layout of substations, station transformers, elements to be earthed in a substation, power system earthing, earthing transformers, bus bar arrangements and gas-insulated substations</li>
<li><strong>Distribution System:</strong> Learn about the effects of voltage on the conductor volume, distributor fed from one end, distributors fed from both ends at the same voltage, distributors fed from both ends at different voltages, and alternating current distribution</li>
<li><strong>Circuit Breakers:</strong> Learn about the classification of circuit breakers, plain-break oil circuit breakers, air break circuit breaker, air blast circuit breakers, vacuum circuit breakers, SF6 circuit breakers, rating and testing of circuit breakers</li>
<li><strong>Relaying and Protection:</strong> Learn all the requirements of relaying, zones of protection, primary and backup protection, classification of relays, electromagnetic relays, induction relays, feeder protection, phase fault protection, reactance relay, static overcurrent relay, differential protection, transformer protection, Buchholz relays, alternator protection restricted earth fault protection, rotor earth fault protection, and negative-sequence protection</li>
<li><strong>Economic Operation of Power Systems:</strong> Gain an understanding of steam power plants, heat rate characteristics and characteristics of hydro plants</li>
<li><strong>Load Frequency Control:</strong> Learn about speed governing mechanism, speed governor, steady state speed regulations and adjustment of governor characteristics</li>
<li><strong>Voltage and Reactive Power Control:</strong> Gain an understanding of impedance and reactive power, system voltage and reactive power, voltage regulation and power transfer</li>
<li><strong>Renewable Energy Sources:</strong> Learn about solar power, wind power, geothermal energy, biomass and tidal power</li>
<li><strong>Restructuring of Electrical Power Systems:</strong> Gain an understanding of smart grids, smart grid components, smart grid benefits, and open smart grid protocol</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Introduction to Power Systems

<div>
</div>
<section>
<div>
<h2>About this Training Course</h2>
<p>The 3-day hands-on petroleum economics training course provides a comprehensive overview of the practices of exploration and development petroleum economics and its application in valuing oil and gas assets to aid corporate decisions.</p>
<p>Participants will gain a thorough understanding of the principles of economic analysis as well as practical instruction in analytical techniques used in the industry. The participants will learn how to construct economic models, to include basic fiscal terms, production and cost profiles and project timing. The resulting model will provide insights of how the various inputs affect value. Example exercises will be used throughout the course.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will be able to:</p>
<ul>
<li>Understand and construct petroleum industry cash flow projections</li>
<li>Calculate, understand and know how to apply economic indicators</li>
<li>Learn and apply risk analysis to exploration and production investments</li>
<li>Evaluate and model fiscal/PSC terms of countries worldwide</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The following oil &amp; gas company personnel will benefit from the knowledge shared in this course:</p>
<ul>
<li>Geologists</li>
<li>Explorationists</li>
<li>Reservoir Engineers</li>
<li>Project Accountants</li>
<li>Contract Negotiators</li>
<li>Financial Analysts</li>
<li>New Venture Planners</li>
<li>Economists</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert trainer has over 40 years' experience as a petroleum economist in the upstream oil and gas industry. He has presented over 230 oil and gas industry short courses worldwide on petroleum economics, risk, production sharing contracts (PSC) and fiscal analysis. In over 120 international oil industry consulting assignments, he has advised companies and governments in the Asia Pacific region on petroleum PSC and fiscal terms. He has prepared many independent valuations of petroleum properties and companies for acquisition and sale, as well as economics research reports on the oil and gas industry and including commercial support for oil field operations and investments worldwide. He has been involved in projects on petroleum royalties, design of petroleum fiscal terms, divestment of petroleum assets, and economic evaluation of assets and discoveries since the early 1990s to date. He has been working on training, consultancy, research and also advisory works in many countries including USA, UK, Denmark, Switzerland, Australia, New Zealand, Indonesia, India, Iran, Malaysia, Thailand, Vietnam, Brunei, Egypt, Libya, and South Africa.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Upstream Petroleum Economics, Risk and Fiscal Analysis

Brighton

Southend on Sea

Rotherham

Manchester

Slough

Portsmouth

Bingley

Nottingham

Paisley

Birmingham

Luton

Northampton

Bedford

Liverpool 

Swansea

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (Foundation Degree Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M00 - Introduction:
Learning outcomes, Assumptions and Overview.
M01 - Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to
the advanced course.
M02 - Aspirated and Vacuated Systems:
Open systems (Syringe & Needle), closed systems (Vacutainer & Monovette), Alternative closed systems, Using Monovette - aspiration and evacuated techniques, monovette adapter systems.
M03 - Specialised and Advanced Phlebotomy Equipment:
The centrifuge - overview. Safe operation and use. Managing a centrifuge breakage or spillage.
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at
0 degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
M04 - Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC tests. Roles for phlebotomists performing POC Tests.
M05 - Neonates and Children:
Sample collection from new-born to pre-adult. A detailed overview of legal principles of law including child consent and child protection for phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedures including
microtainers, lancets and capillary tube collection. Detailed heel prick procedure. Paediatric finger prick collection. The life-threatening hazard of over-collecting. Communication techniques in differing age bands.
Consent and the law. Basic principles of lawful consent for neonates and paediatric patients. Child protection.
Detailed analysis of neonatal and paediatric blood collection including Guthrie card collection. Neonatal bottles - colours and tests. Paediatric blood gases collection.
Butterfly needles - when to use. Blood tests during pregnancy. Neonatal blood screening - nine conditions covered. Bilirubin in neonates.
M06 - Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin changes and venepuncture implications. A profile of common
geriatric blood tests. Age related problems. Procedural precautions.
M07 - Special Procedures:
Drawing blood from back of hand. Drawing blood from lower limb veins. Managing the unwilling or difficult patient. Managing the psychiatric patient. Managing the isolated patient. Non-routine blood tests. Managing the latex allergy patient (type 1 and type 4 reactions). Latex indicators. Sample handling - non-routine procedures. Drug trials and research projects.
M08 - Special Tests and Sample Handling Procedures:
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group - collection notes, analytic time, optimal collection time and notes for each group.
M09 - Advanced Phlebotomy Tasks:
Additional procedures. Maintaining POC equipment. Stock control and stock rotation. Quality control. Data entry. Product evaluation. Training and competency evaluation.
M10 - Alternative Environments:
A step-by-step look at non-clinical phlebotomy environments including private testing, DEFRA, forensic and police, cord blood collection, DNA analysis, veterinary services, overseas and volunteering.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM)
MORNING , AFTERNOON OR EVENING SESSION:

1 - Welcome, introductions and overview:
- Classroom - health & safety briefing, schedule overview.
- Virtual Classroom - audio/visual checks and registration. Unpacking and overview of your training kit.
2 - Syringe and Needle (open system): Correct use and applications.
3 - Monovette (open and closed systems):
Using the Monovette system in aspiration mode - correct use and applications.
Using the Monovette system in evacuated mode - correct use and applications.
4 - IR Vein Detector:
Demonstration of the IR vein detector for assisting in detection of difficult veins.
5 - Veins in back of hand:
Detecting suitable veins in the back of the hand.
6 - POC testing:
Point of Care Testing - use of glucose meter to demonstrate a typical POC test procedure. Correct use and overview of other POC test devices.
7 - Using lancets (finger collection)
We look at the correct use of lancets for POC testing and whole blood micro-collection.
8 - Using lancets (heel collection)
We look at the correct use of lancets for neonatal blood spot tests (Guthrie Test).
9 - Capillary collection
Using glass capillary tubes for micro-collection. Correct use and handling.
10 - Microtube collection
Correct use of BD Microtainers (and similar micro-collection bottles) - collection and handling.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6)

    FDSc (Foundation Degree Level) qualification

    Nationally Recognised certificate

    Dually accredited: Open College Network  and CPD

    Covers both aspirated and evacuated systems

    Covers specialised blood collection systems & methods

    Classroom or Virtual Classroom learning options

    Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep)

    Complete your training from beginner to advanced level

    This course either follows on from our Introduction to Phlebotomy Course  or can be combined with our introductory course as part of a course package (see below)

    Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.


Advanced Phlebotomy - Skills & Techniques (GPT005)

Key Facts:


COURSE 1: PERIPHERAL I.V. CANNULATION COURSE (GPT008)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.

 
Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)
Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.





Key Facts:


COURSE 2: VACCINATION / INJECTION COURSE (GPT601)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)


Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (FDSc Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)



SUITABLE FOR:
- MEDICAL / HEALTHCARE (trainees and professionals)
- AESTHETIC THERAPISTS (all levels)

 
This Vaccination / Injection Course is a nurse or paramedic-led half-day session covering all essential theory and practical skill-sets required to deliver effective Intramuscular, Intradermal and Subcutaneous injections / vaccinations.
 
PART 1 - THEORY (online)
Delegates will fully understand the theory and will be able to demonstrate they can identify the correct patient, gain consent and safely administer a vaccine or injection, conforming to WHO and Skills for Health recommended standards.
 
Itinerary:
M01 Course Overview and brief history
M02 Infection Protection Control
M03 Professionalism and Effective Communication
M04 Understanding injection procedures
M05 Why do we vaccinate?
M06 The immune system and how vaccines work. Vaccine types and composition.
M07 The National Vaccine Policy & Schedule
M08 Vaccine preventable diseases
M08A – Covid-19 Update
M09 Vaccines - understanding the reconstitution process
M10 Storage and Handling – understanding correct procedures and protocols
M11 Equipment – Syringes and Syringe Types, Needles and Needle Types, SDV (Single-Dose Vials), MDV (Multi-Dose Vials), Pre-Filled Syringes, Gloves and PPE.
M12 Vaccination sites, techniques and anatomical site selection
i) Intramuscular (IM) Injection
ii) Subcutaneous (SubCut) Injection
iii) Intradermal (ID) Injection
M13 Legal requirements, Consent and Standard Operating Procedures
M14 Adverse Reactions and Basic Life Support Guidance
M15 Record keeping & Documentation
 
PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING
PART 2 - CLASSROOM (am, pm or evening sessions)
3 - 4 hours skill-set development with practical demonstrations and hands-on experience performing Intramuscular, Intradermal and Subcutaneous Injections.
 


How do I attend?

EITHER -
CLASSROOM OPTION - Complete your theory training online at home or work, then attend one of our scheduled classroom locations, completing your Peripheral IV Cannulation Course and your Injection Course on the same day.
Our Peripheral IV Cannulation Course and Injection Course training kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available for you to add at time of booking. Training kits mirror the same equipment and supplies used in the classroom and both include detailed video instructions, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for your one full day to complete your cannulation and injection course training.

Our Virtual Classroom option includes two very comprehensive training kits - one for your cannulation course and one for your injection course. Kits are included at no charge (normally £79.95 and £39.95 respectively) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Additional Courses suitable for Aesthetic Therapists:
Our popular Introduction to Phlebotomy Course also trains you to perform venepuncture at Advanced Level. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Advanced Level.
If you already have phlebotomy skills (or decide to enroll on our phlebotomy training course) then you will be able to offer your clients Platelet-Rich Plasma (PRP) Treatments, also known as Vampire Facials. Our PRP (Vampire Facials) Course trains you in the harvesting, preparation and treatment of PRP for application to your clients as required. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Foundation Degree Level.

If you would like to "mix and match" your training dates and/or locations or would like to build your own package of courses then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are dually accredited and are Skills for Health & WHO compliant.

Medical Aesthetics

Platelet-rich plasma (PRP)

Intravenous Cannulation

Aesthetic Practitioner

Facial Aesthetics

THIS COURSE PACKAGE INCLUDES:
1: PERIPHERAL I.V. CANNULATION - IV THERAPIES COURSE (GPT008)
2: VACCINATION / INJECTION COURSE (GPT601)

Learn how to administer injectables and intravenous therapies ...

FAST-TRACK YOUR AESTHETICS TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% Multi-Course Discount

    Cover all stages from Level 1 through to Level 4 (FDSc)

    Cover your theory training online

    Complete your advanced practical training in 1 day

    Practical training in Classroom or Virtual Classroom

    Comprehensive Practise@Home training kits for VC

    Awards 2 accredited qualifications

    Dual Accreditations for all courses

    Covers all steps required to safely perform injectables

    Covers all steps required to safely perform IV therapies

    Practise IV on artificial arm with fake blood

    Practise injection techniques on realistic injection pads

    Learn beginner to advanced skills and techniques

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Aesthetic Therapy Training - Beginner to Advanced PACKAGE

Cardiff

Milton Keynes 

<div data-testid="richTextElement" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">ONLINE STUDY - In your own time (approx. 6 hours study time) +</span></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><br fr-original-style="" style="box-sizing: border-box;"></span></strong></span></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Awarding Body:</strong>&nbsp;Open College Network (OCN) Credit for Learning</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Award Level:</strong>&nbsp;Level 3 (Advanced Level) - Ireland Level 5</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">CPD Certified:</strong>&nbsp;Yes (CPD Accreditation)</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Minimum Age:&nbsp;</strong>18 (16 with parental consent)</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Entry requirements:&nbsp;</strong>None. (English Level 2 desirable)</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Training Locations:</strong>&nbsp;Study online + Classroom</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">&nbsp;</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(255, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(255, 0, 0);">OCN Accredited at UK Level 3 (Ireland Level 5)</span><br fr-original-style="" style="box-sizing: border-box;"></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">&nbsp;</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PART 1 - Theory:</strong>&nbsp;Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PART 2 - Skills and Practical Development:</strong><br fr-original-style="" style="box-sizing: border-box;">Safely and competently set up and maintain a Peripheral IV Infusion.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Attend a classroom location to complete your practical training.<br fr-original-style="" style="box-sizing: border-box;"></strong></p><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><span style="color: rgb(184, 49, 47); box-sizing: border-box;" fr-original-style="color: rgb(184, 49, 47);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;">Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></strong></span></p></div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Course Itinerary:</strong></div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></strong></div><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PART 1 - THEORY (ONLINE)</strong><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M1 - Peripheral IV Cannulation - Introduction:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Definitions - understanding terminology relating to PIVC.<br fr-original-style="" style="box-sizing: border-box;">IV Therapy and NMC guidelines.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M2 - Legal &amp; Professional Responsibilities:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Legal Obligations and Accountability. Criminal, Civil and<br fr-original-style="" style="box-sizing: border-box;">Contractual law in Healthcare. Vicarious Liability and your<br fr-original-style="" style="box-sizing: border-box;">Duty of Care.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M3 - Anatomy &amp; Physiology:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Sites appropriate to IV cannulation. Hand vs. arm.<br fr-original-style="" style="box-sizing: border-box;">Advantages and disadvantages of relevant veins.<br fr-original-style="" style="box-sizing: border-box;">An overview of Homeostasis and Fluid Balance.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M4 - Hygiene and Infection Prevention &amp; Control (IPC):</strong></span><br fr-original-style="" style="box-sizing: border-box;">Reducing healthcare-associated infections. Keeping Safe.<br fr-original-style="" style="box-sizing: border-box;">Bloodborne Pathogens and Work Practice Controls.<br fr-original-style="" style="box-sizing: border-box;">Standard Precautions. Waste Disposal. Needle-stick injuries.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M5 - Indications and Advantages:</strong></span><br fr-original-style="" style="box-sizing: border-box;">When to cannulate, infusion types and benefits over<br fr-original-style="" style="box-sizing: border-box;">alternative infusion routes. Continuous and intermittent infusion.<br fr-original-style="" style="box-sizing: border-box;">Prophylactic use before procedures and in unstable patients.<br fr-original-style="" style="box-sizing: border-box;">Contraindications.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M6 - Equipment:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Cannula types, sizes and colour coding. How to select<br fr-original-style="" style="box-sizing: border-box;">appropriate size. Equipment overview for total procedure.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M7 - Vein Choice for Cannulation:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Correct vein selection. Which veins to avoid.<br fr-original-style="" style="box-sizing: border-box;">How to manage an unsuccessful cannulation.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M8 - Procedures:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Full procedure for cannulation including correct documentation.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M8: Guide to Cannulation - revision</strong></span><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M8: Video - Recap with full procedure</strong></span><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M9 - Contraindications:</strong></span><br fr-original-style="" style="box-sizing: border-box;">When inappropriate to cannulate including patients with specific health conditions.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M10 - Complications:</strong></span><br fr-original-style="" style="box-sizing: border-box;">A detailed look at potential complications during and after<br fr-original-style="" style="box-sizing: border-box;">cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED</strong><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">BEFORE JOINING US FOR YOUR PRACTICAL TRAINING</strong><br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">PART 2 (CLASSROOM:</span><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong></strong><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">1 - Welcome, introductions and overview:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Classroom - registration and introductions.<br fr-original-style="" style="box-sizing: border-box;">Virtual Classroom - audio/visual checks and registration.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">2 - Legal &amp; Professional Responsibilities:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Overview and discussion.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">3 - Anatomy - key points (appropriate to PIVC):</strong></span><br fr-original-style="" style="box-sizing: border-box;">Arteries and veins. Selecting an approprate site. Sites to avoid and &ldquo;first choice&rdquo; sites.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">4 - Cannulae - selection and types:</strong></span><br fr-original-style="" style="box-sizing: border-box;">A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">5 - Complications:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Complications of pVAD insertion including examples of<br fr-original-style="" style="box-sizing: border-box;">infiltration, haematoma, extravasation and transfixation.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">6 - VIP Score:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Understanding and using the Visual Infusion Phlebitis score.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">7 - Equipment - overview:</strong></span><br fr-original-style="" style="box-sizing: border-box;">We take a look at all essential equipment required for PIVC.<br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">8 - PRACTICAL SESSIONS:</strong><br fr-original-style="" style="box-sizing: border-box;">Multiple practical sessions throughout the session.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">9 - Fluids:</strong></span><br fr-original-style="" style="box-sizing: border-box;">The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann&rsquo;s solution, Colloids (and risks), blood products.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">10 - Infusion Rates:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Calculating infusion rates and drops per minute.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;">This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.</em></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">&nbsp;</p><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)</strong></em></p></div></div><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p>

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Aesthetics

Medicine & Nursing

Venepuncture & Cannulation

Learn how to cannulate ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced) - Ireland Level 5

    CPD Accredited - The CPD Certification Service

    Classroom or Virtual Classroom options

    Covers all steps for cannulating in arm or hand

    Practise on artificial arms and fake blood!

    Essential qualification for all IV therapies

    Phlebotomy training desirable but not essential

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Peripheral I.V. Cannulation Course (GPT008)

<div style="color: rgb(36, 39, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(36, 39, 41);">The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.</div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);">Delegates successfully completing the e-learning will:<br fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have an awareness of how to correctly identify and select the appropriate form of personal<br fr-original-style="" style="box-sizing: border-box;">protection against falls from MEWPs.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness only of how to check, use, maintain and store a harness and<br fr-original-style="" style="box-sizing: border-box;">lanyard with manufacturer&rsquo;s instructions.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.</li></ul></div>

Kingfisher Access

The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.

Delegates successfully completing the e-learning will:
Have an awareness of how to correctly identify and select the appropriate form of personal
protection against falls from MEWPs.
Have a theoretical awareness only of how to check, use, maintain and store a harness and
lanyard with manufacturer’s instructions.
Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.

IPAF - Harness Awareness 

<div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><h2 fr-original-style="" style="box-sizing: border-box;">INTRAMUSCULAR, INTRADERMAL &amp; SUBCUTANEOUS INJECTION COURSE (GPT601)<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">CLASSROOM or VIRTUAL CLASSROOM (with online theory)</span></h2></div><section fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-testid="columns" fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-mesh-id="comp-kl8214n52inlineContent" data-testid="inline-content" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214n52inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">Learn how to administer vaccines or injections ...&nbsp;</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Nationally Recognised Qualification</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes IM, ID and Sub-Cut Injection methods</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OCN Accredited - Level 4 (Foundation Degree - FDSc)</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Covers all steps to safely perform a vaccination</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Use same techniques and skills for aesthetic therapies</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes B12, Vitamin C and other treatments</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Essential qualification for all injections</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Basic understanding of English language required</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OPEN TO ALL APPLICANTS</p></li></ul><div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">About this course</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">Learning Outcomes</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">After the course</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">PART 1 - Theory: complete online at<br fr-original-style="" style="box-sizing: border-box;">home or work and download a certificate of completion</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Injections - Aesthetics - B12, Vit C etc.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">78 UK &amp; Eire training locations</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OCN Accredited at Level 4 (FDSc)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Medical training standards throughout</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Skills for Health &amp; WHO compliant</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" id="isPasted" fr-original-style="color:#0D73B7;">Learning Outcomes</span></p><div data-mesh-id="comp-kl8214o43inlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214o43inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Train up to point of first vaccination or injection&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">All theory and practical skills required to perform a safe procedure</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Covers all essential theory and skill-set development to meet medical standards</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understand the procedures used to set up &nbsp;a manage and administer a vaccine</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Post-injection management and how to avoid critical complications</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Correct client care and aftercare</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes legal, consent and documentation</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" id="isPasted" fr-original-style="color:#0D73B7;">After the course</span></p><div data-mesh-id="comp-kl8214oainlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214oainlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Safely and competently administer a vaccine or drug treatment (ie. B12)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Correct client management before, during injection and safe after-care</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understanding equipment types and appropriate choices</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understand vaccine management control</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Appreciate legal and professional responsibilities</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Offer injection therapies to clients - vitamin supplements</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Administer in hospitals, GP Surgeries and Outreach Centres</p></div></div></div></div></div></div></div></div></div></div></div></section>

INTRAMUSCULAR, INTRADERMAL & SUBCUTANEOUS INJECTION COURSE (GPT601)
CLASSROOM or VIRTUAL CLASSROOM (with online theory)
Learn how to administer vaccines or injections ... 
Nationally Recognised Qualification
Includes IM, ID and Sub-Cut Injection methods
OCN Accredited - Level 4 (Foundation Degree - FDSc)
Covers all steps to safely perform a vaccination
Use same techniques and skills for aesthetic therapies
Includes B12, Vitamin C and other treatments
Essential qualification for all injections
Basic understanding of English language required
OPEN TO ALL APPLICANTS
About this course
Learning Outcomes
After the course
PART 1 - Theory: complete online at
home or work and download a certificate of completion
PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom
Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines
Injections - Aesthetics - B12, Vit C etc.
78 UK & Eire training locations
OCN Accredited at Level 4 (FDSc)
Medical training standards throughout
Skills for Health & WHO compliant
Learning Outcomes
Train up to point of first vaccination or injection 
All theory and practical skills required to perform a safe procedure
Covers all essential theory and skill-set development to meet medical standards
Understand the procedures used to set up a manage and administer a vaccine
Post-injection management and how to avoid critical complications
Correct client care and aftercare
Includes legal, consent and documentation
After the course
Safely and competently administer a vaccine or drug treatment (ie. B12)
Correct client management before, during injection and safe after-care
Understanding equipment types and appropriate choices
Understand vaccine management control
Appreciate legal and professional responsibilities
Offer injection therapies to clients - vitamin supplements
Administer in hospitals, GP Surgeries and Outreach Centres

Immunisation & Vaccination

Immunisation

Injection

Vaccination

Vaccinator

Learn how to administer vaccines or injections ...

    Nationally Recognised Qualification

    Includes IM, ID and Sub-Cut Injection methods

    OCN Accredited - Level 4 (Foundation Degree - FDSc)

    Covers all steps to safely perform a vaccination

    Use same techniques and skills for aesthetic therapies

    Includes B12, Vitamin C and other treatments

    Essential qualification for all injections

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Vaccination / Injection Course (GPT601)

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>The primary audience for this course is any IT, facilities or data centre professional, who are involved in the design/build, renovation or relocation of a mission-critical data centre.</p>Overview<p>This 5-day course is designed to prepare participants to analyse a given business case and perform technical evaluation for a project plan and a set of designs for the implementation of a mission critical data centre.<br />The course also engages participants in product evaluations and demonstrates how to select equipment and develop equipment test scripts (IET) and integrated performance and validation testing (IPVT). CDCEÂ© builds upon knowledge gained in CDCP and CDCS courses. Participants who pass the exam will join the industry's elite data centre project design experts.<br />CDCEÂ© is the highest level training in the EPI Design and Build training track under the EPI Data Centre Training Framework. Participants must hold a valid CDCS certificate in order to be able to register for the CDCE class.</p><p>CDCEÂ© is the premier certification for data centre professionals in the data centre design/build and related fields.</p></div><div id="course-pills-2"><h4>Data Centre Life Cycle</h4><ul><li>Data centre lifecycle stages and phases<br />Exercise: Stage/Phase/Milestone/Document mapping</li></ul><h4>Design Preparation</h4><ul><li>Creation of a SON ? Statement Of Need<br />Technology review<br />Conceptual sizing<br />How to calculate for computer room space<br />How to calculate facility space<br />How to calculate incoming power<br />Exercise: Conceptual sizing building and power<br />Analysing capacity of existing facility<br />Analysing investment options<br />Site selection<br />Permits and approvals<br />Exercise: Site selection<br />Conceptual design<br />Budget and project timeline<br />Business case preparation<br />Project delivery structure<br />Project management options<br />Project manager and team</li></ul><h4>Design Planning</h4><ul><li>OSRA?Operational Systems Requirement Analysis<br />TFRA?Technical Facilities Requirement Analysis<br />Operations and maintenance review<br />RFP?Request For Proposal process<br />Vendor selection</li></ul><h4>Design Development</h4><ul><li>Project planning<br />Design development<br />PDR ? Preliminary Design Review<br />Equipment selection<br />FDR/V ? Final Design Review/Validation<br />Exercise: Full design validation of power, cooling, floor plans, fire suppression<br />Design freeze and LLTI<br />Creation of construction documents<br />BOM/BOQ ? Bill Of Material/Bill Of Quantity<br />Exercise: Equipment selection</li></ul><h4>Acquire</h4><ul><li>Requirements of purchase orders<br />Shipping terms<br />FWT/FAT ? Factory Witness Test/Factory Acceptance Test<br />Sequencing<br />Incoming goods inspection and handling<br />Asset management</li></ul><h4>Construct</h4><ul><li>Temporary essential services<br />Erection of the building<br />Permanent essential services<br />Building inspection<br />Snag list<br />COF?Certificate Of Fitness</li></ul><h4>Fit-Out</h4><ul><li>Fit-Out<br />Builders cleaning<br />As-Built Drawings</li></ul><h4>Test &amp; Commissioning</h4><ul><li>IET?Individual Equipment Test<br />IPVT/IST?Integrated Performance Verification Test/Integrated Systems Test<br />Common mistakes with IET/IPVT<br />Deep cleaning<br />Exercise: IET/IPVT scripting</li></ul><h4>Hand-Over</h4><ul><li>Facility hand-over requirements and documents<br />PCC?Practical Completion Certificate<br />DLP?Defect Liability Period<br />Defect Management<br />ICT Systems Installation<br />ICT Systems Testing<br />Hand-Over/DLP Expiry<br />FCC?Final Completion Certificate</li></ul><h4>Retirement</h4><ul><li>Reasons and definitions of retirement<br />Building the business case and project plan<br />Sequencing<br />Transfer of site<br />Demolishing of site<br />Legal matters<br />FCC?Final Completion Certificate</li></ul><h4>Exam: Certified Data Centre Expert (CDCEÂ©)</h4><ul><li>The CDCEÂ© exam is in two parts: Part A is a 90-minute closed book exam, with 60 multiple-choice questions. For Part A, the candidate requires a minimum of 45 correct answers to pass the exam. Part B is a 90-minute closed book exam, with 25 open questions. For Part B the candidate needs to obtain a minimum of 75% to pass.</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Data Centre Expert (CDCE) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Data Centre Expert (CDCE) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Nexus Human

Certified in Cybersecurity (CC)

IT Certifications

Construction Design & Management (CDM)

Cisco Certified Internetwork Expert (CCIE)

Certified in Data Protection (CDP)

Certified Cyber Professional (CCP)

Certified Data Centre Expert (CDCE)

<p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(var(--color_25));">This official BRCGS course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of auditors auditing against Global Food Safety Initiative (GFSI) recognised certification programmes.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors with audit against the Standard. &nbsp;Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days&#39; duration.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the <a href="https://www.brcgs.com/store/" target="_blank" rel="noreferrer noopener" style="color: inherit; -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Store</a>, in addition to the pre-course materials provided.&nbsp;</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course you will be assessed with an exam. Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.</p><p style="color: rgb(77, 77, 79); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(77, 77, 79);"><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">This course is part of the</span><a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">.</span></p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course participants will be able to:&nbsp;</p><ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Explain the steps to managing an audit programme</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe auditing fundamentals and techniques</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe the scope of companies and products covered by the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Utilise and explain resource tools available for compliance and beneficial support from BRCGS</p></li></ul>

This official BRCGS course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of auditors auditing against Global Food Safety Initiative (GFSI) recognised certification programmes.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors with audit against the Standard. Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days' duration.
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided. 
At the end of the course you will be assessed with an exam. Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Explain the steps to managing an audit programme
Describe auditing fundamentals and techniques
Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity
Describe the scope of companies and products covered by the Standard
Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit
Utilise and explain resource tools available for compliance and beneficial support from BRCGS

Ask Sonia Limited

Food Safety

HACCP

Official BRCGS Food Safety Issue 9 Lead Auditor training course. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner & Virtual Trainer.
Exam and Certificate fee included in the price.

BRCGS Food Safety Issue 9 - Lead Auditor (5 Days)

<p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(var(--color_25));">This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard. It is designed to equip delegates with the knowledge of how to successfully implement the requirements of the Standard on site. Participants will discuss activities which develop a culture to maintain compliance and learn what to expect during the process of certification, including actions needed prior to, during and after the audit.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how sites will implement the Standard.&nbsp;</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the <a href="https://www.brcgs.com/store/" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Store</a>, in addition to the pre-course materials provided. It is advised participants must have working knowledge of HACCP.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course, participants will be assessed with an exam.&nbsp;</p><p style="color: rgb(77, 77, 79); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(77, 77, 79);"><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">This course is part of the</span><a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">.</span></p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course participants will be able to:&nbsp;</p><ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Explain what is required to comply with the requirements of the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe the scope of companies and products covered by the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe what to expect from your BRCGS audit&nbsp;</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Prepare for an audit to the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Apply resource tools available for compliance and support from BRCGS</p><br fr-original-style="" style="box-sizing: border-box;"></li></ul>

This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard. It is designed to equip delegates with the knowledge of how to successfully implement the requirements of the Standard on site. Participants will discuss activities which develop a culture to maintain compliance and learn what to expect during the process of certification, including actions needed prior to, during and after the audit.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how sites will implement the Standard. 
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided. It is advised participants must have working knowledge of HACCP.
At the end of the course, participants will be assessed with an exam. 
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Explain what is required to comply with the requirements of the Standard
Describe the scope of companies and products covered by the Standard
Describe what to expect from your BRCGS audit
Prepare for an audit to the Standard
Apply resource tools available for compliance and support from BRCGS

Official BRCGS Food Safety Issue 9 course. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner.
Exam and Certificate fee included in the price.

BRCGS Food Safety Issue 9 - For Sites (2 Days)

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(35, 35, 51);">This course is taught using a set of principles and methodologies developed by us to give participants a system they can always refer to any time they get stuck trying to interpret financial information.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">We have developed a 4-box model for teaching accounting which makes the process of breaking down any transaction natural for the nonaccountant. The system works without the need to learn any double-entry accounting, participants apply the system and instinctively know what to do.&nbsp;</span><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">This is followed up with another 4-box model we developed to completely break down financial analysis and ratios into the most fundamental metrics required of every role in an organization. &nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">Our approach is to teach financial analysis by making each participant aware of how their role and actions directly impact the company&#39;s bottom line.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">Participants will also be able to interpret the financial statement in a natural way using a third model (the 5 Box Balance Sheet) to analyze business performance effectively.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">This instructor-led course includes:&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;2 weeks of self-paced essential learning content that you are to complete before the instructor-led live virtual sessions begin.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;4 instructor-led virtual sessions of 2 hours each. Each Session will have a 15-minute break.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;Intersession Assignments that you are expected to complete and discuss in your preassigned groups during the session.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;1 Capstone Project&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; Lifetime access to our LMS where you will have free access to the trainer, other participants, and resources including knowledge videos.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;Access to our community of life-long learners.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;Downloadable Certificate you can link to your LinkedIn Page</strong>&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">We look forward to seeing you in Class!!!</span></p>

dbrownconsulting

Financial Intelligence

Finance For Non Finance Managers

Finance Fundamentals

Elevate your role as a non-finance manager by learning to interpret financial information and analysis and learn how your actions directly impact the company's bottom line. 

562 Learning courses in Belfast

Combustion Engineering for Coal Fired Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Root Cause Analysis for Boilers and Steam Cycle Failures

By EnergyEdge - Training for a Sustainable Energy Future

Junos Service Provider Switching

By Systems & Network Training

Integrated Field Development Planning for Offshore Fields

By EnergyEdge - Training for a Sustainable Energy Future

Maintenance Planning, Scheduling & Control

By EnergyEdge - Training for a Sustainable Energy Future

Advanced Turnaround, Shutdown and Outage Management

By EnergyEdge - Training for a Sustainable Energy Future

Seismic Interpretation in Carbonates

By EnergyEdge - Training for a Sustainable Energy Future

Industrial Instrumentation and Modern Control Systems

By EnergyEdge - Training for a Sustainable Energy Future

Introduction to Power Systems

By EnergyEdge - Training for a Sustainable Energy Future

Upstream Petroleum Economics, Risk and Fiscal Analysis

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location