Name: Root Cause Analysis for Boilers and Steam Cycle Failures
Price: 3009 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of all the maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems of all key electrical equipment including: transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries. It will cover in detail all the inspection methods and tests required to identify faults and deficiencies in electrical equipment, as well as, the repair techniques and available refurbishment methods.</p>
<p>The course will also cover the activities required to commission this equipment and it will also cover all protective systems associated with this equipment.  The objective of the seminar is to maximize the efficiency, reliability, and longevity of this type of equipment by providing an understanding of the common problems and repair techniques, preventive and predictive maintenance.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Electrical Equipment Testing and Maintenance: </strong>Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Inspection and Diagnostics: </strong>Learn about the inspection and diagnostics required for all the components of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Troubleshooting:</strong> Determine all the troubleshooting activities required to minimize the downtime and operating cost of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Online Condition Monitoring:</strong> Learn about online condition monitoring of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Repair and Refurbishment: </strong>Obtain a detailed understanding of the various methods used to repair and refurbish transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Efficiency, Reliability, and Longevity: </strong>Learn the various methods used to maximize the efficiency, reliability, and longevity of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Rotating </strong><strong>Equipment Vibration Analysis and Balancing Methods:</strong> Learn about vibration analysis and balancing methods of motors and generators.</li>
<li><strong>Electrical Equipment Codes and Standards: </strong>Learn all the codes and standards applicable for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Equipment Causes and Modes of Failure: </strong>Understand the causes and modes of failure of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Generator Upgrades and Rewinds:</strong> Learn the various methods used to upgrade and rewind a generator</li>
<li><strong>Protective Systems: </strong>Obtain a detailed understanding of all protective systems required for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals (this course is suitable for individuals who do not have an electrical background)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>The relevant material of the 'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Electrical Equipment Maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems Manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines. This course will also cover in detail all the components of these turbines, instrumentation, control systems, governing systems, and selection criteria.</p>
<p>The main focus of this course will be on the failure modes of steam turbine components, causes and solutions for component failure, maintenance, refurbishment and overhaul, rotor dynamic analysis of steam turbines, and computer simulation of steam turbine rotor dynamics. All possible failure modes of steam turbine components and the maintenance required to prevent them will be discussed in detail. Examples of rotor dynamic analysis, and stability criteria will be covered thoroughly.</p>
<p>This course will also provide up-dated information in respect to all the methods used to enhance the availability, reliability, and maintainability of steam turbines, increase the efficiency and longevity of steam turbines, and improve the rotor dynamic stability. This course will also cover in detail all steam turbine valves, jacking oil system, turning gear, turbine supervisory system, steam turbine monitoring technology, validation, and verification tests, performance testing of steam turbines and steam turbine codes especially ASME PTC6.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Steam Turbine Components and Systems:</span></strong><span> Learn about all components and systems of the various types of steam turbines such as: stationary and rotating blades, casings, rotor, seals, bearings, and lubrication systems</span></li>
<li><strong><span>Steam Turbine Failure Modes, Inspection, Diagnostic Testing, and Maintenance:</span></strong><span> Understand all the failure modes of steam turbine components, causes and solutions of steam turbine component failure, inspection, diagnostic testing, and all maintenance activities required for steam turbines to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Steam Turbine Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation, control systems, and governing systems of steam turbines</span></li>
<li><strong><span>Steam Turbine Reliability and Maintainability:</span></strong><span> Increase your knowledge about all the methods used to enhance the reliability and maintainability of steam turbines as well as the predictive and preventive maintenance required for steam turbines</span></li>
<li><strong><span>Steam Turbine Selection and Applications:</span></strong><span> Gain a detailed understanding of the selection considerations and applications of steam turbines in steam power plants, co-generation, combined-cycle plants, and drivers for compressors pumps, etc</span></li>
<li><strong><span>Steam Turbine Valves, Load-Frequency Control, Turbine Bypass Systems, and Steam Turbine Superheater Attemperators:</span></strong><span> Gain a thorough understanding of all steam turbine valves, load-frequency control, turbine bypass systems, and steam turbine superheater attemperators</span></li>
<li><strong><span>Jacking Oil System and Turning Gear:</span></strong><span> Learn about the turbine jacking oil system and turning gear operation</span></li>
<li><strong><span>Turbine Supervisory System:</span></strong><span> Gain a thorough understanding of the turbine supervisory system</span></li>
<li><strong><span>Steam Turbine Monitoring Technology, Validation, and Verification Tests for Power Plants:</span></strong><span> Learn about steam turbine monitoring technology, validation, and verification tests for power plants</span></li>
<li><strong><span>Steam Turbine Codes:</span></strong><span> Learn about steam turbine codes including ASME PTC6, DIN Test Code, and International Electrotechnical Commission (IEC) Doc 1, IEC Doc B</span></li>
<li><strong><span>Steam Turbine Rotor Dynamic Analysis, Campbell, Goodman, and SAFE Diagrams: </span></strong><span>Gain a thorough understanding of steam turbine rotor dynamic analysis, Campbell, Goodman, and SAFE diagrams</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>STEAM TURBINE TECHNOLOGY MANUAL (includes practical information about steam turbines maintenance, testing, and refurbishment - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Steam Turbine Technology

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of all electrical equipment including transformers, switchgear, induction and synchronous motors, generators and auxiliaries. All commissioning activities are covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, documentation, testing and commissioning schedules, test reports, safety, certification, and plant completion report. The course provides also a thorough understanding of all the commissioning requirements for transformers, switchgear, induction and synchronous motors and, generator and auxiliaries including its switchgear equipment, switchgear, and transformers.</p>
<p>All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures for every type of transformers, switchgear, induction and synchronous motors, and generators and auxiliary systems, instrumentation, trial run of the equipment, safety and precautions, commissioning of electrical systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports.</p>
<p>This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any electrical equipment because it provides detailed pre-commissioning checks and tests and detailed tests and commissioning procedures for every electrical equipment. In addition, the course provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each electrical equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for all Electrical Equipment: </span></strong><span>Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for all electrical equipment</span></li>
<li><strong><span>Commissioning Procedures, Documents, and Certification of Electrical Equipment:</span></strong><span> Discover the benefits of the Commissioning Management System of electrical equipment including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, documentation, testing and commissioning schedules, test reports, safety, equipment certification, and commissioning completion report</span></li>
<li><span><strong>Commissioning Procedures for Transformers</strong>: </span><span>Learn about the commissioning procedures for transformers including functional checks, pre-commissioning tests, commissioning tests, and records.</span></li>
<li><strong><span>Commissioning Procedures for Switchgear Assemblies: </span></strong><span>Gain a thorough understanding of all the commissioning procedures for switchgear assemblies including substation commissioning, electrical testing, code requirements, safety rules, grounding and shorting, high power testing, NETA acceptance testing procedures, test values analysis, and commissioning forms</span></li>
<li><strong><span>Commissioning Procedures for Generator and Auxiliaries: </span></strong><span>Discover all the commissioning procedures for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator</span></li>
<li><span><strong>Commissioning Procedures and Instructions for Generator Electrical Equipment:</strong> </span><span>Learn about all the commissioning procedures and instructions for generator electrical equipment including switchyard equipment, switchgear, transformers, and motors</span></li>
<li><strong><span>Code Requirements for Commissioning Electrical Equipment and Systems: </span></strong><span>Learn about the code requirements for commissioning transformers, switchgear, inductions and synchronous motors, and generators and auxiliaries</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>ELECTRICAL EQUIPMENT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for all electrical equipment - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Commissioning of Electrical Equipment

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVRs), governing systems, and protective systems.</p>
<p>The focus will be on maximizing the efficiency, reliability and longevity of these equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p>
<p>The emphasis of this course is on protective systems, inspection methods, diagnostic testing, troubleshooting, modern maintenance techniques, refurbishment, rewind and upgrade options, as well as advanced methods for preventing partial discharge and other failures.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Equipment Operation:</strong> Gain a thorough understanding of the operating characteristics of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Diagnostics and Inspection:</strong> Learn in detail all the diagnostic techniques and inspections required of critical components of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Testing:</strong> Understand thoroughly all the tests required for the various types of generators, exciters, AVR's and protective systems</li>
<li><strong>Electrical Generator Protective Systems:</strong> Gain a thorough understanding of all Electrical generator protective systems including: all electrical relays, tripping mechanisms, protective systems for negative phase sequence (unbalance loading), loss of excitation, over fluxing protection (over-voltage and underfrequency), reverse power (generator monitoring), over-speeding, pole slipping / out of step (sudden increase in torque or weakness in excitation), Class A protection, Class B protection</li>
<li><strong>Equipment Maintenance and Troubleshooting:</strong> Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Repair and Refurbishment:</strong> Gain a detailed understanding of the various methods used to repair and refurbish generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Rewind and Upgrade Options:</strong> Discover all options available to rewind and upgrade the generator rotor and stator to enhance the output and reduce downtime</li>
<li><strong>Efficiency, Reliability, and Longevity:</strong> Learn the various methods used to maximize the efficiency, reliability, and longevity of generators, exciters, AVR's and protective systems</li>
<li><strong>Advanced Methods to Prevent Failure:</strong> Gain a thorough understanding of all the methods used to prevent partial discharge, and other failures in generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Sizing:</strong> Gain a detailed understanding of all the calculations and sizing techniques used for generators, exciters, AVR's and protective systems</li>
<li><strong>Design Features:</strong> Understand all the design features that improve the efficiency, reliability of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Selection:</strong> Learn how to select generators, exciters, AVR's and protective systems by using the performance characteristics and selection criteria that you will learn in this course</li>
<li><strong>Equipment Enclosures and Sealing Methods:</strong> Learn about the various types of enclosures and sealing arrangements used for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Commissioning:</strong> Understand all the commissioning requirements for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Codes and Standards:</strong> Learn all the codes and standards applicable for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Causes and Modes of Failures:</strong> Understand causes and modes of failures of generators, exciters, AVR's and protective systems</li>
<li><strong>System Design:</strong> Learn all the requirements for designing different types of generators, exciters, AVR's and protective systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Generator Inspection, Testing, Maintenance, Protective Systems and Refurbishment Manual (this manual covers all the inspection and maintenance activities as well as all protective systems required for generators - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Electrical Generators, Excitation Systems and Governing Systems

<div>
</div>
<section>
<div>
<h2><strong>About this Training</strong></h2>
<p>A variety of factors such as prices for crude oil and natural gas, liability exposure, and relations with host countries, present an opportunity for investors looking to acquire assets without taking on elements of exploration and market risk. Conversely, operators want to ensure that they are in the best position to monetise the disposal of interests in their portfolios.</p>
<p>The material in this course covers the range of considerations that occur in the sale and purchase of upstream oil and gas properties. They include structuring (asset sale, share transfer, merger, interest swaps, and farm-outs), process (tender, direct negotiation, due diligence, preliminary and final agreements, closing and post-closing adjustments) and how funding is structured (credit agreements and reserve base lending).</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will be able to:</p>
<ul>
<li>Plan and prepare for the sale or purchase of upstream oil and gas properties</li>
<li>Select and structure the type of transaction best suit to the position of the Buyer and Seller</li>
<li>Conduct and evaluate the commercial, operational, and legal aspects of due diligence</li>
<li>Negotiate and document the terms and conditions contained in sale and purchase agreements for oil and gas properties</li>
<li>Conduct post-closing adjustments in the sale and purchase of operating properties</li>
<li>Assist in the negotiation of credit arrangements to fund the purchase of oil and gas properties</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course has been specifically designed for commercial, operating, legal and financial professionals involved in the sale and purchase of upstream oil and gas properties whose roles include:</p>
<ul>
<li>Conducting tenders for the sale of exploration and operating interests</li>
<li>Performing due diligence reviews</li>
<li>Negotiating preliminary and definitive agreements</li>
<li>Arranging credit agreements and other types of funding</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is an international legal expert in petroleum law who is based in Scotland. He received the degrees of Juris Doctor from the University of Wyoming and LLM-Energy Law from the University of Utah. He has been listed in the Guide to the World's Leading Energy and Natural Resources Lawyers. In over 30 years of practice, he has been chief legal officer in petroleum companies, consultant to development banks and aid programmes, and law professor.</p>
<p>His private sector experience included positions as General Counsel of the Petroleum Corporation of New Zealand and Chief Legal Officer for Sinclair Oil Corporation in the United States. He has been a consultant to the Asian Development Bank, The World Bank and the European Investment Bank on petroleum sector policy, gas sales agreements, and production sharing contracts. This has included assignments in Cambodia, Bangladesh, India, Indonesia, Laos, Pakistan, Papua New Guinea, Philippines, and Vietnam.</p>
<p>Your expert course leader has been an adviser and trainer on negotiations for various petroleum companies including BP, BG Group, Gazprom, KazMunayGas, Perushaan Gas Negera, Pertamina, PETRONAS, Philippine National Oil Corporation, Total, Shell and Statoil. He was appointed by Economic Community of West African States (ECOWAS) as the lead negotiator on behalf of four West African governments for the West African Gas Pipeline Project.</p>
<p>His academic credentials include an appointment as Distinguished Visiting Professor for Oil &amp; Gas Law at the University of Wyoming. He is currently Honourary Professor for International Petroleum Law at the University of Dundee Centre for Energy, Petroleum &amp; Mineral Law and Policy. At CEPMLP, he has been the Course Director and principal instructor for seminars on Petroleum Industry Negotiations, Petroleum Service Contracts, Gas Industry Contracts, and Downstream Petroleum Law. He is the course author of International Comparative Petroleum Law. His publications include A Framework for Negotiating and Documenting International Petroleum Transactions and A Framework for Negotiating and Managing Production Sharing Contracts and Related Agreements. His academic work has been published in the Land and Water Law Review, Tulsa Law Journal and Journal of Comparative and International Law.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Sale & Purchase of Oil & Gas Properties

Belfast

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(105, 105, 105); box-sizing: border-box;" fr-original-style="color: rgb(105, 105, 105);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">INTRODUCTION AND CONTENT</strong></span></p><p style="color: rgb(105, 105, 105); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(105, 105, 105);"><span style="color: rgb(105, 105, 105); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(105, 105, 105);">By the end of the course participants will be able to understand the concept of Self-Myofascial Release and the role of fascia within the body and reasons why it becomes tight and understanding the concept of trigger points. Participants will have an understanding of why SMR should be employed as well as when is most beneficial to use SMR. They will also gain an understanding of what happens during SMR within the tissue fibres. Participants will be able to identify suitable equipment to use and know how to perform SMR on various muscles within the body. And finally the participants will know some of the contraindications that would prevent a person from undertaking SMR.</span></p><p style="color: rgb(105, 105, 105); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(105, 105, 105);"><span style="color: rgb(105, 105, 105); box-sizing: border-box;" fr-original-style="color: rgb(105, 105, 105);"><br fr-original-style="" style="box-sizing: border-box;"></span></p><p style="color: rgb(105, 105, 105); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(105, 105, 105);"><span style="color: rgb(105, 105, 105); box-sizing: border-box;" fr-original-style="color: rgb(105, 105, 105);"><span style="color: rgb(105, 105, 105); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(105, 105, 105);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PRE-REQUISITES</strong></span><br fr-original-style="" style="box-sizing: border-box;"></span></p><p style="color: rgb(105, 105, 105); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(105, 105, 105);"><span style="color: rgb(105, 105, 105); box-sizing: border-box;" fr-original-style="color: rgb(105, 105, 105);"><span style="color: rgb(105, 105, 105); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(105, 105, 105);">Minimum of Level 2 Fitness Instructor, or Level 3 Personal Trainer. This course is also open to those able to show adequate prior learning for example, sports massage therapist, chiropractor, sport rehabilitator or physiotherapist.</span><br fr-original-style="" style="box-sizing: border-box;"></span></p><div style="color: rgb(105, 105, 105); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(105, 105, 105);"><p style="color: rgb(105, 105, 105); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(105, 105, 105);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">AIMS AND OBJECTIVES</strong></p></div><section style="color: rgb(105, 105, 105); box-sizing: border-box;" fr-original-style=" color: rgb(105, 105, 105);"><div itemprop="text" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">&bull; To understand what SMR is<br fr-original-style="" style="box-sizing: border-box;">&bull; To explain what Fascia is<br fr-original-style="" style="box-sizing: border-box;">&bull; To increase understanding of why fascia becomes tight<br fr-original-style="" style="box-sizing: border-box;">&bull; To understand why SMR should be employed<br fr-original-style="" style="box-sizing: border-box;">&bull; To understand the concept of trigger points<br fr-original-style="" style="box-sizing: border-box;">&bull; To understand when to undertake SMR<br fr-original-style="" style="box-sizing: border-box;">&bull; To understand what happens during SMR<br fr-original-style="" style="box-sizing: border-box;">&bull; To cover the types of equipment used<br fr-original-style="" style="box-sizing: border-box;">&bull; To gain an understanding of how to perform SMR on typical muscles<br fr-original-style="" style="box-sizing: border-box;">&bull; To understand contraindications for SMR</li></ul></div></section>

INTRODUCTION AND CONTENT
By the end of the course participants will be able to understand the concept of Self-Myofascial Release and the role of fascia within the body and reasons why it becomes tight and understanding the concept of trigger points. Participants will have an understanding of why SMR should be employed as well as when is most beneficial to use SMR. They will also gain an understanding of what happens during SMR within the tissue fibres. Participants will be able to identify suitable equipment to use and know how to perform SMR on various muscles within the body. And finally the participants will know some of the contraindications that would prevent a person from undertaking SMR.


PRE-REQUISITES

Minimum of Level 2 Fitness Instructor, or Level 3 Personal Trainer. This course is also open to those able to show adequate prior learning for example, sports massage therapist, chiropractor, sport rehabilitator or physiotherapist.

AIMS AND OBJECTIVES
• To understand what SMR is
• To explain what Fascia is
• To increase understanding of why fascia becomes tight
• To understand why SMR should be employed
• To understand the concept of trigger points
• To understand when to undertake SMR
• To understand what happens during SMR
• To cover the types of equipment used
• To gain an understanding of how to perform SMR on typical muscles
• To understand contraindications for SMR

Platinum Training Institute

By the end of the course participants will be able to understand the concept of Self-Myofascial Release and the role of fascia within the body and reasons why it becomes tight and understanding the concept of trigger points. Participants will have an understanding of why SMR should be employed as well as when is most beneficial to use SMR. They will also gain an understanding of what happens during SMR within the tissue fibres. Participants will be able to identify suitable equipment to use and know how to perform SMR on various muscles within the body. And finally the participants will know some of the contraindications that would prevent a person from undertaking SMR.

Self Myofascial Release (SMR) Workshop

General Admission

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>Transmission lines and sub-stations are essential components in the electrical power systems. Proper design and maintenance are crucial for transmission lines to maintain a continuous operation. The objective of this 5-day training course is to deal appropriately with control systems, design characteristics and electric &amp; magnetic fields. Participants will gain a better understanding on the corona and gap discharge phenomena, constructional features, and optimization of the transmission lines.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By participating in this course, you will be able to:</p>
<ul>
<li>Understand transmission line design and its application</li>
<li>Examine different types of conductors and electrical characteristics</li>
<li>Explore basic and general transmission line parameters</li>
<li>Prevent overvoltage through insulation design</li>
<li>Determine surge impedance and corona effects</li>
<li>Calculate and measure electric and magnetic fields</li>
<li>Comprehend the impact of audible noise and electromagnetic interference</li>
<li>Identify interference within the transmission line systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The course will greatly benefit the following groups but not limited to:</p>
<ul>
<li>Electrical Engineers</li>
<li>Civil Engineers</li>
<li>Transmission &amp; Distribution Engineers</li>
<li>Substation Operators</li>
<li>Safety Engineers</li>
<li>Reliability Engineers</li>
<li>Facility &amp; Plant Engineers</li>
<li>Technical Engineers</li>
<li>Design Engineers</li>
<li>Plant Supervisors</li>
<li>Electrical Contractors</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.</span></p>
<p><em><span>Course Duration: 5 days in total (35 hours).</span></em></p>
<p><strong><span>Training Schedule</span></strong></p>
<p><span>0830 - Registration </span><span>0900 - Start of training </span><span>1030 - Morning Break </span><span>1045 - Training recommences </span><span>1230 - Lunch Break </span><span>1330 - Training recommences </span><span>1515 - Evening break </span><span>1530 - Training recommences </span><span>1700 - End of Training</span></p>
<p><span>The maximum number of participants allowed for this training course is 25.</span></p>
<p><span>This course is also available through our Virtual Instructor Led Training (VILT) format.</span></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><span>Your expert course leader is a professional engineer with extensive experience in power system studies, substation design field-testing, and EHS programs settings for Mining and Electrical Utilities sectors. He was formally the Engineering Manager at GE Canada in Ontario. He received his M.Sc. in electrical engineering from the University of New Brunswick and his MBA from Laurier School of Business in Waterloo.</span> <span>He has managed and executed more than 150 engineering projects on substation design EMF audits and power system studies and analyses, EMF audits and grounding audits, for major electrical utilities, mines, oil and gas, data centers, industrial and commercial facilities in Canada and the U.S. He is a certified professional engineer in the provinces of Ontario and Alberta.</span></p>
<p><span>He has various IEEE publications, has served as a technical reviewer for many IEEE journals in power systems and control systems, and is the chair of the Industry Application Chapter (IAS) for IEEE Toronto Section. He remains a very active member for the IEEE substation committee of IEEE Std. 81 ground testing (WGE6) and IEEE Std. 80 ground design (WGD7). A certified electrical safety trainer by GE Corporate and a Canadian Standard Association (CSA) committee member at the mining advisory panel for electrical safety, he also taught many technical courses all over Canada to industrial customers, electrical consultants as well as to electrical utilities customers.</span></p>
<p><span>Highlighted Projects:</span></p>
<ul>
<li><span>Various Power System Studies for 345/230 kV Stations - Nova Scotia Power (EMERA)</span></li>
<li><span>RF audits for Telecom tower and antennas - Cogeco/Rogers Mobile</span></li>
<li><span>Power System analysis - Powell Canada</span></li>
<li><span>Structural/Geotechnical Design and upgrades - Oakville Hydro</span></li>
<li><span>Underground Cables testing and sizing - Plan Group</span></li>
<li><span>Relay programming and design optimization - Cenovus Canada</span></li>
<li><span>Different Arc Flash Analysis and BESS Design - SNC Lavalin</span></li>
<li><span>Environmental site assessment (ESA) Phase I/II for multiple stations - Ontario</span></li>
<li><span>Electromagnetic compatibility (EMC) assessment for Toronto LRT expansion - MOSAIC</span></li>
<li><span>Battery energy storage system (BESS) installation at City of London - Siemens Canada</span></li>
<li><span>EMF audits for 500 kV Transmission Lines - Hydro One</span></li>
<li><span>EMF audits for 500 kV Transmission Lines - Hydro Quebec</span></li>
<li><span>AC interference for 138 kV line modeling and mitigations - HBMS Mine</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Transmission Lines: Design, Analysis and Applications

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans. This course provides also a comprehensive explanation of all boiler combustion control systems including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system as well as their tuning methods. All boiler control systems are covered as well in this course including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, boiler-turbine coordinated control, etc.</p>
<p>The course provides also detailed explanation of Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code). The burner management systems (BMS) and examples of boiler permissive starting logic and protective tripping logic will be explained thoroughly. The various methods used to calculate the boiler efficiency are covered in detail in this course including the direct and indirect methods. All the factors which affect the efficiency and emissions of pulverized coal boiler and CFB boiler will be explained thoroughly.</p>
<p>The course covers also all the methods used to improve the efficiency of pulverized coal boilers and CFB boilers including improvement to their combustion efficiency and control systems performance.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Boiler Combustion Equipment and Systems:</span></strong><span> Gain an in-depth understanding of all boiler combustion equipment and systems including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans</span></li>
<li><strong><span>Boiler Combustion Control Systems:</span></strong><span> Gain a thorough understanding of all boiler combustion control systems for pulverized coal boilers, and CFB boilers including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system</span></li>
<li><strong><span>Boiler Conventional Control Systems:</span></strong><span> Gain an in-depth understanding of all boiler conventional control systems including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, and boiler-turbine coordinated control</span></li>
<li><strong><span>Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code):</span></strong><span> Learn about NFPA 85 code and ANSI/ISA-77-44-01-2007 code</span></li>
<li><strong><span>Burner Management System and Boiler Permissive Starting Logic and Protective Tripping Logic:</span></strong><span> Gain an in-depth understanding of burner management system and boiler permissive starting logic and protective tripping logic</span></li>
<li><strong><span>Boiler Efficiency Calculations:</span><span> Learn how to calculate the boiler efficiency using the direct and indirect methods</span></strong></li>
<li><strong><span>Factors Affecting the Efficiency and Emissions of Boilers: </span></strong><span>Understand all the factors which affect the boiler efficiency and emissions</span></li>
<li><strong><span>Methods Used to Improve the Efficiency of Boilers:</span></strong><span> Learn about all the methods used to improve the efficiency of pulverized coal boilers, and CFB boilers including improvement to their combustion efficiency and control systems performance</span></li>
<li><strong><span>Boiler Instrument and Piping Diagrams:</span></strong><span> Gain an in-depth understanding of all boiler instrument and piping diagrams</span></li>
<li><strong><span>CFB and Pulverized Coal Boilers Equipment and Systems:</span></strong><span> Learn about various types of equipment and systems used in CFB and pulverized coal boilers including economizers, steam drum, superheaters, air preheaters, ammonia injection systems, etc.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>COMBUSTION ENGINEERING FOR COAL FIRED POWER PLANTS MANUAL (includes practical information about combustion engineering for coal fired power plants - 550 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Combustion Engineering for Coal Fired Power Plants

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will provide a comprehensive understanding of the design of circulating fluidized bed (CFB) boilers. The design of all CFB boiler components and equipment including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves will be covered in detail. All potential operating problems and major operating problems, corrective actions and maintenance required for CFB boilers will be covered thoroughly.</p>
<p>This course will focus on designing CFB boilers that have the highest efficiency, and maximum longevity and capacity factor. All the common problems encountered in CFB Boilers will be discussed in detail.This includes thermally induced failures, anchor system induced failures, water walls tube failures, NMEJ damages, clinker formation, refractory damages, APH tube chock-up, erosion and corrosion. The solutions to each of these problems will be presented. All repair and refurbishment methods, preventive and predictive maintenance required for CFB boilers will be covered in-depth.</p>
<p>Several studies have confirmed that CFB boilers are the best method for power generation.This is due to their fuel flexibility, and lowest electricity cost among all types of boilers. This technology is in great demand due to various other advantages such as lower emissions as compared to other types of boilers and has a carbon footprint well below the norms laid down by the World Bank emission requirements.</p>
<p>This course is a MUST for anyone who is involved in the design, operation or maintenance of circulating fluidized bed boilers, because it covers how these boilers are designed and provides guidelines and rules that ensure the CFB boilers have great performance. This course will also provide up-dated information in respect to the design of supercritical once-through CFB boilers and ultra supercritical CFB boilers.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><span><strong>Circulating Fluidized Bed Boiler Design:</strong> </span><span>Gain a thorough understanding of the best design methods of circulating fluidized bed boilers.</span></li>
<li><span><strong>Design of Circulating Fluidized Bed Boiler:</strong> Components and Systems</span><span>: Learn</span> <span>all the techniques used to design CFB boiler equipment and systems including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves.</span></li>
<li><strong><span>Design of Circulating Fluidized Bed Boiler to Achieve Highest Efficiency, and Best Performance and Economics</span></strong><span><strong>:</strong> Gain a thorough understanding of all the methods used to design CFB boilers having the highest efficiency, longevity and capacity factor as well as best economics.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Equipment:</span></strong><span> Learn about various equipment of circulating fluidized bed boilers including: furnaces, cyclones, economizers, superheaters, reheaters, ammonia injection systems, electrostatic precipitators, polishing dry scrubbers, fuel and sorbent feeding systems, bottom ash handling and extraction systems and materials.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Environmental Emissions:</span></strong><span> Learn about the monitoring and control of environmental emissions from circulating fluidized boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation and control systems of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Reliability and Testing:</span></strong><span> Increase your knowledge of predictive and preventive maintenance, reliability and testing of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Selection and Applications: </span></strong><span>Gain a detailed understanding of the selection considerations and applications of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Maintenance:</span></strong><span> Learn all the maintenance activities required for circulating fluidized bed boilers, to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Refurbishment, and Life Extension Methods: </span></strong><span>Learn about life cycle cost, profitability, refurbishment, and life extension methods for all types of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Commissioning: </span></strong><span>Understand all the commissioning requirements of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Codes and Standards: </span></strong><span>Learn all the codes and standards applicable for circulating fluidized bed boilers.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Design of Circulating Fluidized Bed Boiler manual (600 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Design Of Circulating Fluidized Bed Boilers

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Identifying and correcting the root cause of failures in boilers and steam power plant equipment is essential to help reduce the chance of future problems. A comprehensive assessment is the most effective method of determining the root cause of a failure. For example, a tube failure in a boiler is usually a symptom of other problems. To fully understand the root cause of the failure, one must investigate all aspects of boiler operation leading to the failure in addition to evaluating the failure itself. When a boiler tube failure occurs, the root cause of the failure must be identified and eliminated.</p>
<p>This 5 full-day course starts by providing an in-depth understanding of root cause analysis methodology. This includes how to identify the problem, contain and analyze the problem, define the root cause of the problem, define and implement the actions required to eliminate the root cause, and validate that the corrective actions prevented recurrence of the problem. Many practical examples on how to apply root cause analysis for various industrial problems are discussed in detail.</p>
<p>The course then provides an in-depth explanation of all failure mechanisms that occur in steam power plants including corrosion, erosion, creep, cavitation, under-deposit attacks, stress corrosion cracking, hydrogen embrittlement, flow accelerated corrosion, etc. This course also provides a thorough explanation of all the failure mechanisms that occur in boilers and steam power plant equipment including steam turbines, condensers, feedwater heaters, etc. The symptoms of the failures, possible causes, components typically affected and solutions are also provided in this course. This includes boiler waterside, fireside and general boiler failure mechanisms as well as all the causes and prevention of all steam turbine failures, condensers, and feedwater heaters. The course also includes detailed study of many case histories of failures in boilers, steam turbines, condensers and feedwater heaters.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Electrical Equipment Testing and Maintenance: </span></strong><span>Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</span></li>
<li><strong><span>Root Cause Analysis Methodology:</span></strong><span> Understand root cause analysis methodology including: identification of the problem, defining the problem, understanding the problem, identification of the root cause of the problem, providing corrective action, and monitoring the system.</span></li>
<li><strong><span>Applying the Root Cause Analysis Method to Industrial Problems:</span></strong><span> Learn by studying many practical examples how to apply the root cause analysis method to various industrial problems.</span></li>
<li><strong><span>Damage Mechanisms in Boilers and Steam Power Plant Equipment: </span></strong><span>Gain a thorough understanding of all the damage mechanisms that occur in boilers and all steam power plant equipment including turbines, condensers and feedwater heaters. These mechanisms include corrosion, erosion, flow accelerated corrosion, stress corrosion cracking, creep, under-deposit attack, cavitation, hydrogen embrittlement, etc.</span></li>
<li><strong><span>Symptoms of Failures in Boilers and Steam Power Plant Equipment, Possible Causes, Components Typically Affected, and Solutions:</span></strong><span> Learn about all the symptoms of failures in boilers and steam power plant equipment including steam turbines, condensers, and feedwater heaters, their possible causes, components typically affected and proven solutions.</span></li>
<li><strong><span>Case Histories of Failures in Boilers, Steam Turbines, Condensers, and Feedwater Heaters:</span></strong><span> Learn by studying many case histories how failures occur in boilers, steam turbines, condensers, and feedwater heaters and the corrective actions taken to deal with them</span></li>
</ul>
<p> </p>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals (this seminar is suitable for individuals who do not have an electrical background)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2011 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>ROOT CAUSE ANALYSIS FOR BOILERS AND STEAM CYCLE FAILURES MANUAL (includes practical information and case histories - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Root Cause Analysis for Boilers and Steam Cycle Failures

Brighton

Southend on Sea

Rotherham

Manchester

Slough

Portsmouth

Bingley

Nottingham

Paisley

Birmingham

Luton

Northampton

Bedford

Liverpool 

Swansea

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (Foundation Degree Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M00 - Introduction:
Learning outcomes, Assumptions and Overview.
M01 - Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to
the advanced course.
M02 - Aspirated and Vacuated Systems:
Open systems (Syringe & Needle), closed systems (Vacutainer & Monovette), Alternative closed systems, Using Monovette - aspiration and evacuated techniques, monovette adapter systems.
M03 - Specialised and Advanced Phlebotomy Equipment:
The centrifuge - overview. Safe operation and use. Managing a centrifuge breakage or spillage.
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at
0 degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
M04 - Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC tests. Roles for phlebotomists performing POC Tests.
M05 - Neonates and Children:
Sample collection from new-born to pre-adult. A detailed overview of legal principles of law including child consent and child protection for phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedures including
microtainers, lancets and capillary tube collection. Detailed heel prick procedure. Paediatric finger prick collection. The life-threatening hazard of over-collecting. Communication techniques in differing age bands.
Consent and the law. Basic principles of lawful consent for neonates and paediatric patients. Child protection.
Detailed analysis of neonatal and paediatric blood collection including Guthrie card collection. Neonatal bottles - colours and tests. Paediatric blood gases collection.
Butterfly needles - when to use. Blood tests during pregnancy. Neonatal blood screening - nine conditions covered. Bilirubin in neonates.
M06 - Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin changes and venepuncture implications. A profile of common
geriatric blood tests. Age related problems. Procedural precautions.
M07 - Special Procedures:
Drawing blood from back of hand. Drawing blood from lower limb veins. Managing the unwilling or difficult patient. Managing the psychiatric patient. Managing the isolated patient. Non-routine blood tests. Managing the latex allergy patient (type 1 and type 4 reactions). Latex indicators. Sample handling - non-routine procedures. Drug trials and research projects.
M08 - Special Tests and Sample Handling Procedures:
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group - collection notes, analytic time, optimal collection time and notes for each group.
M09 - Advanced Phlebotomy Tasks:
Additional procedures. Maintaining POC equipment. Stock control and stock rotation. Quality control. Data entry. Product evaluation. Training and competency evaluation.
M10 - Alternative Environments:
A step-by-step look at non-clinical phlebotomy environments including private testing, DEFRA, forensic and police, cord blood collection, DNA analysis, veterinary services, overseas and volunteering.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM)
MORNING , AFTERNOON OR EVENING SESSION:

1 - Welcome, introductions and overview:
- Classroom - health & safety briefing, schedule overview.
- Virtual Classroom - audio/visual checks and registration. Unpacking and overview of your training kit.
2 - Syringe and Needle (open system): Correct use and applications.
3 - Monovette (open and closed systems):
Using the Monovette system in aspiration mode - correct use and applications.
Using the Monovette system in evacuated mode - correct use and applications.
4 - IR Vein Detector:
Demonstration of the IR vein detector for assisting in detection of difficult veins.
5 - Veins in back of hand:
Detecting suitable veins in the back of the hand.
6 - POC testing:
Point of Care Testing - use of glucose meter to demonstrate a typical POC test procedure. Correct use and overview of other POC test devices.
7 - Using lancets (finger collection)
We look at the correct use of lancets for POC testing and whole blood micro-collection.
8 - Using lancets (heel collection)
We look at the correct use of lancets for neonatal blood spot tests (Guthrie Test).
9 - Capillary collection
Using glass capillary tubes for micro-collection. Correct use and handling.
10 - Microtube collection
Correct use of BD Microtainers (and similar micro-collection bottles) - collection and handling.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6)

    FDSc (Foundation Degree Level) qualification

    Nationally Recognised certificate

    Dually accredited: Open College Network  and CPD

    Covers both aspirated and evacuated systems

    Covers specialised blood collection systems & methods

    Classroom or Virtual Classroom learning options

    Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep)

    Complete your training from beginner to advanced level

    This course either follows on from our Introduction to Phlebotomy Course  or can be combined with our introductory course as part of a course package (see below)

    Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.


Advanced Phlebotomy - Skills & Techniques (GPT005)

Key Facts:


COURSE 1: PERIPHERAL I.V. CANNULATION COURSE (GPT008)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.

 
Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)
Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.





Key Facts:


COURSE 2: VACCINATION / INJECTION COURSE (GPT601)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)


Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (FDSc Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)



SUITABLE FOR:
- MEDICAL / HEALTHCARE (trainees and professionals)
- AESTHETIC THERAPISTS (all levels)

 
This Vaccination / Injection Course is a nurse or paramedic-led half-day session covering all essential theory and practical skill-sets required to deliver effective Intramuscular, Intradermal and Subcutaneous injections / vaccinations.
 
PART 1 - THEORY (online)
Delegates will fully understand the theory and will be able to demonstrate they can identify the correct patient, gain consent and safely administer a vaccine or injection, conforming to WHO and Skills for Health recommended standards.
 
Itinerary:
M01 Course Overview and brief history
M02 Infection Protection Control
M03 Professionalism and Effective Communication
M04 Understanding injection procedures
M05 Why do we vaccinate?
M06 The immune system and how vaccines work. Vaccine types and composition.
M07 The National Vaccine Policy & Schedule
M08 Vaccine preventable diseases
M08A – Covid-19 Update
M09 Vaccines - understanding the reconstitution process
M10 Storage and Handling – understanding correct procedures and protocols
M11 Equipment – Syringes and Syringe Types, Needles and Needle Types, SDV (Single-Dose Vials), MDV (Multi-Dose Vials), Pre-Filled Syringes, Gloves and PPE.
M12 Vaccination sites, techniques and anatomical site selection
i) Intramuscular (IM) Injection
ii) Subcutaneous (SubCut) Injection
iii) Intradermal (ID) Injection
M13 Legal requirements, Consent and Standard Operating Procedures
M14 Adverse Reactions and Basic Life Support Guidance
M15 Record keeping & Documentation
 
PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING
PART 2 - CLASSROOM (am, pm or evening sessions)
3 - 4 hours skill-set development with practical demonstrations and hands-on experience performing Intramuscular, Intradermal and Subcutaneous Injections.
 


How do I attend?

EITHER -
CLASSROOM OPTION - Complete your theory training online at home or work, then attend one of our scheduled classroom locations, completing your Peripheral IV Cannulation Course and your Injection Course on the same day.
Our Peripheral IV Cannulation Course and Injection Course training kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available for you to add at time of booking. Training kits mirror the same equipment and supplies used in the classroom and both include detailed video instructions, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for your one full day to complete your cannulation and injection course training.

Our Virtual Classroom option includes two very comprehensive training kits - one for your cannulation course and one for your injection course. Kits are included at no charge (normally £79.95 and £39.95 respectively) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Additional Courses suitable for Aesthetic Therapists:
Our popular Introduction to Phlebotomy Course also trains you to perform venepuncture at Advanced Level. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Advanced Level.
If you already have phlebotomy skills (or decide to enroll on our phlebotomy training course) then you will be able to offer your clients Platelet-Rich Plasma (PRP) Treatments, also known as Vampire Facials. Our PRP (Vampire Facials) Course trains you in the harvesting, preparation and treatment of PRP for application to your clients as required. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Foundation Degree Level.

If you would like to "mix and match" your training dates and/or locations or would like to build your own package of courses then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are dually accredited and are Skills for Health & WHO compliant.

Medical Aesthetics

Platelet-rich plasma (PRP)

Intravenous Cannulation

Aesthetic Practitioner

Facial Aesthetics

THIS COURSE PACKAGE INCLUDES:
1: PERIPHERAL I.V. CANNULATION - IV THERAPIES COURSE (GPT008)
2: VACCINATION / INJECTION COURSE (GPT601)

Learn how to administer injectables and intravenous therapies ...

FAST-TRACK YOUR AESTHETICS TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% Multi-Course Discount

    Cover all stages from Level 1 through to Level 4 (FDSc)

    Cover your theory training online

    Complete your advanced practical training in 1 day

    Practical training in Classroom or Virtual Classroom

    Comprehensive Practise@Home training kits for VC

    Awards 2 accredited qualifications

    Dual Accreditations for all courses

    Covers all steps required to safely perform injectables

    Covers all steps required to safely perform IV therapies

    Practise IV on artificial arm with fake blood

    Practise injection techniques on realistic injection pads

    Learn beginner to advanced skills and techniques

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Aesthetic Therapy Training - Beginner to Advanced PACKAGE

Cardiff

Milton Keynes 

<div data-testid="richTextElement" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">ONLINE STUDY - In your own time (approx. 6 hours study time) +</span></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><br fr-original-style="" style="box-sizing: border-box;"></span></strong></span></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Awarding Body:</strong>&nbsp;Open College Network (OCN) Credit for Learning</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Award Level:</strong>&nbsp;Level 3 (Advanced Level) - Ireland Level 5</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">CPD Certified:</strong>&nbsp;Yes (CPD Accreditation)</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Minimum Age:&nbsp;</strong>18 (16 with parental consent)</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Entry requirements:&nbsp;</strong>None. (English Level 2 desirable)</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Training Locations:</strong>&nbsp;Study online + Classroom</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">&nbsp;</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(255, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(255, 0, 0);">OCN Accredited at UK Level 3 (Ireland Level 5)</span><br fr-original-style="" style="box-sizing: border-box;"></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">&nbsp;</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PART 1 - Theory:</strong>&nbsp;Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PART 2 - Skills and Practical Development:</strong><br fr-original-style="" style="box-sizing: border-box;">Safely and competently set up and maintain a Peripheral IV Infusion.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Attend a classroom location to complete your practical training.<br fr-original-style="" style="box-sizing: border-box;"></strong></p><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><span style="color: rgb(184, 49, 47); box-sizing: border-box;" fr-original-style="color: rgb(184, 49, 47);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;">Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></strong></span></p></div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Course Itinerary:</strong></div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></strong></div><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PART 1 - THEORY (ONLINE)</strong><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M1 - Peripheral IV Cannulation - Introduction:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Definitions - understanding terminology relating to PIVC.<br fr-original-style="" style="box-sizing: border-box;">IV Therapy and NMC guidelines.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M2 - Legal &amp; Professional Responsibilities:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Legal Obligations and Accountability. Criminal, Civil and<br fr-original-style="" style="box-sizing: border-box;">Contractual law in Healthcare. Vicarious Liability and your<br fr-original-style="" style="box-sizing: border-box;">Duty of Care.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M3 - Anatomy &amp; Physiology:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Sites appropriate to IV cannulation. Hand vs. arm.<br fr-original-style="" style="box-sizing: border-box;">Advantages and disadvantages of relevant veins.<br fr-original-style="" style="box-sizing: border-box;">An overview of Homeostasis and Fluid Balance.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M4 - Hygiene and Infection Prevention &amp; Control (IPC):</strong></span><br fr-original-style="" style="box-sizing: border-box;">Reducing healthcare-associated infections. Keeping Safe.<br fr-original-style="" style="box-sizing: border-box;">Bloodborne Pathogens and Work Practice Controls.<br fr-original-style="" style="box-sizing: border-box;">Standard Precautions. Waste Disposal. Needle-stick injuries.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M5 - Indications and Advantages:</strong></span><br fr-original-style="" style="box-sizing: border-box;">When to cannulate, infusion types and benefits over<br fr-original-style="" style="box-sizing: border-box;">alternative infusion routes. Continuous and intermittent infusion.<br fr-original-style="" style="box-sizing: border-box;">Prophylactic use before procedures and in unstable patients.<br fr-original-style="" style="box-sizing: border-box;">Contraindications.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M6 - Equipment:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Cannula types, sizes and colour coding. How to select<br fr-original-style="" style="box-sizing: border-box;">appropriate size. Equipment overview for total procedure.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M7 - Vein Choice for Cannulation:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Correct vein selection. Which veins to avoid.<br fr-original-style="" style="box-sizing: border-box;">How to manage an unsuccessful cannulation.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M8 - Procedures:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Full procedure for cannulation including correct documentation.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M8: Guide to Cannulation - revision</strong></span><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M8: Video - Recap with full procedure</strong></span><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M9 - Contraindications:</strong></span><br fr-original-style="" style="box-sizing: border-box;">When inappropriate to cannulate including patients with specific health conditions.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M10 - Complications:</strong></span><br fr-original-style="" style="box-sizing: border-box;">A detailed look at potential complications during and after<br fr-original-style="" style="box-sizing: border-box;">cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED</strong><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">BEFORE JOINING US FOR YOUR PRACTICAL TRAINING</strong><br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">PART 2 (CLASSROOM:</span><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong></strong><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">1 - Welcome, introductions and overview:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Classroom - registration and introductions.<br fr-original-style="" style="box-sizing: border-box;">Virtual Classroom - audio/visual checks and registration.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">2 - Legal &amp; Professional Responsibilities:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Overview and discussion.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">3 - Anatomy - key points (appropriate to PIVC):</strong></span><br fr-original-style="" style="box-sizing: border-box;">Arteries and veins. Selecting an approprate site. Sites to avoid and &ldquo;first choice&rdquo; sites.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">4 - Cannulae - selection and types:</strong></span><br fr-original-style="" style="box-sizing: border-box;">A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">5 - Complications:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Complications of pVAD insertion including examples of<br fr-original-style="" style="box-sizing: border-box;">infiltration, haematoma, extravasation and transfixation.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">6 - VIP Score:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Understanding and using the Visual Infusion Phlebitis score.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">7 - Equipment - overview:</strong></span><br fr-original-style="" style="box-sizing: border-box;">We take a look at all essential equipment required for PIVC.<br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">8 - PRACTICAL SESSIONS:</strong><br fr-original-style="" style="box-sizing: border-box;">Multiple practical sessions throughout the session.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">9 - Fluids:</strong></span><br fr-original-style="" style="box-sizing: border-box;">The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann&rsquo;s solution, Colloids (and risks), blood products.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">10 - Infusion Rates:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Calculating infusion rates and drops per minute.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;">This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.</em></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">&nbsp;</p><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)</strong></em></p></div></div><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p>

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Aesthetics

Medicine & Nursing

Venepuncture & Cannulation

Learn how to cannulate ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced) - Ireland Level 5

    CPD Accredited - The CPD Certification Service

    Classroom or Virtual Classroom options

    Covers all steps for cannulating in arm or hand

    Practise on artificial arms and fake blood!

    Essential qualification for all IV therapies

    Phlebotomy training desirable but not essential

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Peripheral I.V. Cannulation Course (GPT008)

<div style="color: rgb(36, 39, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(36, 39, 41);">The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.</div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);">Delegates successfully completing the e-learning will:<br fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have an awareness of how to correctly identify and select the appropriate form of personal<br fr-original-style="" style="box-sizing: border-box;">protection against falls from MEWPs.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness only of how to check, use, maintain and store a harness and<br fr-original-style="" style="box-sizing: border-box;">lanyard with manufacturer&rsquo;s instructions.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.</li></ul></div>

Kingfisher Access

The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.

Delegates successfully completing the e-learning will:
Have an awareness of how to correctly identify and select the appropriate form of personal
protection against falls from MEWPs.
Have a theoretical awareness only of how to check, use, maintain and store a harness and
lanyard with manufacturer’s instructions.
Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.

IPAF - Harness Awareness 

<div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><h2 fr-original-style="" style="box-sizing: border-box;">INTRAMUSCULAR, INTRADERMAL &amp; SUBCUTANEOUS INJECTION COURSE (GPT601)<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">CLASSROOM or VIRTUAL CLASSROOM (with online theory)</span></h2></div><section fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-testid="columns" fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-mesh-id="comp-kl8214n52inlineContent" data-testid="inline-content" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214n52inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">Learn how to administer vaccines or injections ...&nbsp;</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Nationally Recognised Qualification</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes IM, ID and Sub-Cut Injection methods</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OCN Accredited - Level 4 (Foundation Degree - FDSc)</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Covers all steps to safely perform a vaccination</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Use same techniques and skills for aesthetic therapies</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes B12, Vitamin C and other treatments</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Essential qualification for all injections</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Basic understanding of English language required</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OPEN TO ALL APPLICANTS</p></li></ul><div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">About this course</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">Learning Outcomes</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">After the course</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">PART 1 - Theory: complete online at<br fr-original-style="" style="box-sizing: border-box;">home or work and download a certificate of completion</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Injections - Aesthetics - B12, Vit C etc.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">78 UK &amp; Eire training locations</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OCN Accredited at Level 4 (FDSc)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Medical training standards throughout</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Skills for Health &amp; WHO compliant</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" id="isPasted" fr-original-style="color:#0D73B7;">Learning Outcomes</span></p><div data-mesh-id="comp-kl8214o43inlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214o43inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Train up to point of first vaccination or injection&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">All theory and practical skills required to perform a safe procedure</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Covers all essential theory and skill-set development to meet medical standards</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understand the procedures used to set up &nbsp;a manage and administer a vaccine</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Post-injection management and how to avoid critical complications</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Correct client care and aftercare</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes legal, consent and documentation</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" id="isPasted" fr-original-style="color:#0D73B7;">After the course</span></p><div data-mesh-id="comp-kl8214oainlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214oainlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Safely and competently administer a vaccine or drug treatment (ie. B12)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Correct client management before, during injection and safe after-care</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understanding equipment types and appropriate choices</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understand vaccine management control</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Appreciate legal and professional responsibilities</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Offer injection therapies to clients - vitamin supplements</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Administer in hospitals, GP Surgeries and Outreach Centres</p></div></div></div></div></div></div></div></div></div></div></div></section>

INTRAMUSCULAR, INTRADERMAL & SUBCUTANEOUS INJECTION COURSE (GPT601)
CLASSROOM or VIRTUAL CLASSROOM (with online theory)
Learn how to administer vaccines or injections ... 
Nationally Recognised Qualification
Includes IM, ID and Sub-Cut Injection methods
OCN Accredited - Level 4 (Foundation Degree - FDSc)
Covers all steps to safely perform a vaccination
Use same techniques and skills for aesthetic therapies
Includes B12, Vitamin C and other treatments
Essential qualification for all injections
Basic understanding of English language required
OPEN TO ALL APPLICANTS
About this course
Learning Outcomes
After the course
PART 1 - Theory: complete online at
home or work and download a certificate of completion
PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom
Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines
Injections - Aesthetics - B12, Vit C etc.
78 UK & Eire training locations
OCN Accredited at Level 4 (FDSc)
Medical training standards throughout
Skills for Health & WHO compliant
Learning Outcomes
Train up to point of first vaccination or injection 
All theory and practical skills required to perform a safe procedure
Covers all essential theory and skill-set development to meet medical standards
Understand the procedures used to set up a manage and administer a vaccine
Post-injection management and how to avoid critical complications
Correct client care and aftercare
Includes legal, consent and documentation
After the course
Safely and competently administer a vaccine or drug treatment (ie. B12)
Correct client management before, during injection and safe after-care
Understanding equipment types and appropriate choices
Understand vaccine management control
Appreciate legal and professional responsibilities
Offer injection therapies to clients - vitamin supplements
Administer in hospitals, GP Surgeries and Outreach Centres

Immunisation & Vaccination

Immunisation

Injection

Vaccination

Vaccinator

Learn how to administer vaccines or injections ...

    Nationally Recognised Qualification

    Includes IM, ID and Sub-Cut Injection methods

    OCN Accredited - Level 4 (Foundation Degree - FDSc)

    Covers all steps to safely perform a vaccination

    Use same techniques and skills for aesthetic therapies

    Includes B12, Vitamin C and other treatments

    Essential qualification for all injections

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Vaccination / Injection Course (GPT601)

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>The primary audience for this course is any IT, facilities or data centre professional, who are involved in the design/build, renovation or relocation of a mission-critical data centre.</p>Overview<p>This 5-day course is designed to prepare participants to analyse a given business case and perform technical evaluation for a project plan and a set of designs for the implementation of a mission critical data centre.<br />The course also engages participants in product evaluations and demonstrates how to select equipment and develop equipment test scripts (IET) and integrated performance and validation testing (IPVT). CDCEÂ© builds upon knowledge gained in CDCP and CDCS courses. Participants who pass the exam will join the industry's elite data centre project design experts.<br />CDCEÂ© is the highest level training in the EPI Design and Build training track under the EPI Data Centre Training Framework. Participants must hold a valid CDCS certificate in order to be able to register for the CDCE class.</p><p>CDCEÂ© is the premier certification for data centre professionals in the data centre design/build and related fields.</p></div><div id="course-pills-2"><h4>Data Centre Life Cycle</h4><ul><li>Data centre lifecycle stages and phases<br />Exercise: Stage/Phase/Milestone/Document mapping</li></ul><h4>Design Preparation</h4><ul><li>Creation of a SON ? Statement Of Need<br />Technology review<br />Conceptual sizing<br />How to calculate for computer room space<br />How to calculate facility space<br />How to calculate incoming power<br />Exercise: Conceptual sizing building and power<br />Analysing capacity of existing facility<br />Analysing investment options<br />Site selection<br />Permits and approvals<br />Exercise: Site selection<br />Conceptual design<br />Budget and project timeline<br />Business case preparation<br />Project delivery structure<br />Project management options<br />Project manager and team</li></ul><h4>Design Planning</h4><ul><li>OSRA?Operational Systems Requirement Analysis<br />TFRA?Technical Facilities Requirement Analysis<br />Operations and maintenance review<br />RFP?Request For Proposal process<br />Vendor selection</li></ul><h4>Design Development</h4><ul><li>Project planning<br />Design development<br />PDR ? Preliminary Design Review<br />Equipment selection<br />FDR/V ? Final Design Review/Validation<br />Exercise: Full design validation of power, cooling, floor plans, fire suppression<br />Design freeze and LLTI<br />Creation of construction documents<br />BOM/BOQ ? Bill Of Material/Bill Of Quantity<br />Exercise: Equipment selection</li></ul><h4>Acquire</h4><ul><li>Requirements of purchase orders<br />Shipping terms<br />FWT/FAT ? Factory Witness Test/Factory Acceptance Test<br />Sequencing<br />Incoming goods inspection and handling<br />Asset management</li></ul><h4>Construct</h4><ul><li>Temporary essential services<br />Erection of the building<br />Permanent essential services<br />Building inspection<br />Snag list<br />COF?Certificate Of Fitness</li></ul><h4>Fit-Out</h4><ul><li>Fit-Out<br />Builders cleaning<br />As-Built Drawings</li></ul><h4>Test &amp; Commissioning</h4><ul><li>IET?Individual Equipment Test<br />IPVT/IST?Integrated Performance Verification Test/Integrated Systems Test<br />Common mistakes with IET/IPVT<br />Deep cleaning<br />Exercise: IET/IPVT scripting</li></ul><h4>Hand-Over</h4><ul><li>Facility hand-over requirements and documents<br />PCC?Practical Completion Certificate<br />DLP?Defect Liability Period<br />Defect Management<br />ICT Systems Installation<br />ICT Systems Testing<br />Hand-Over/DLP Expiry<br />FCC?Final Completion Certificate</li></ul><h4>Retirement</h4><ul><li>Reasons and definitions of retirement<br />Building the business case and project plan<br />Sequencing<br />Transfer of site<br />Demolishing of site<br />Legal matters<br />FCC?Final Completion Certificate</li></ul><h4>Exam: Certified Data Centre Expert (CDCEÂ©)</h4><ul><li>The CDCEÂ© exam is in two parts: Part A is a 90-minute closed book exam, with 60 multiple-choice questions. For Part A, the candidate requires a minimum of 45 correct answers to pass the exam. Part B is a 90-minute closed book exam, with 25 open questions. For Part B the candidate needs to obtain a minimum of 75% to pass.</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Data Centre Expert (CDCE) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Data Centre Expert (CDCE) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Nexus Human

Certified in Cybersecurity (CC)

IT Certifications

Construction Design & Management (CDM)

Cisco Certified Internetwork Expert (CCIE)

Certified in Data Protection (CDP)

Certified Cyber Professional (CCP)

Certified Data Centre Expert (CDCE)

<p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(var(--color_25));">This official BRCGS course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of auditors auditing against Global Food Safety Initiative (GFSI) recognised certification programmes.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors with audit against the Standard. &nbsp;Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days&#39; duration.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the <a href="https://www.brcgs.com/store/" target="_blank" rel="noreferrer noopener" style="color: inherit; -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Store</a>, in addition to the pre-course materials provided.&nbsp;</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course you will be assessed with an exam. Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.</p><p style="color: rgb(77, 77, 79); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(77, 77, 79);"><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">This course is part of the</span><a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">.</span></p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course participants will be able to:&nbsp;</p><ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Explain the steps to managing an audit programme</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe auditing fundamentals and techniques</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe the scope of companies and products covered by the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Utilise and explain resource tools available for compliance and beneficial support from BRCGS</p></li></ul>

This official BRCGS course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of auditors auditing against Global Food Safety Initiative (GFSI) recognised certification programmes.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors with audit against the Standard. Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days' duration.
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided. 
At the end of the course you will be assessed with an exam. Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Explain the steps to managing an audit programme
Describe auditing fundamentals and techniques
Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity
Describe the scope of companies and products covered by the Standard
Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit
Utilise and explain resource tools available for compliance and beneficial support from BRCGS

Ask Sonia Limited

Food Safety

HACCP

Official BRCGS Food Safety Issue 9 Lead Auditor training course. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner & Virtual Trainer.
Exam and Certificate fee included in the price.

BRCGS Food Safety Issue 9 - Lead Auditor (5 Days)

<p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(var(--color_25));">This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard. It is designed to equip delegates with the knowledge of how to successfully implement the requirements of the Standard on site. Participants will discuss activities which develop a culture to maintain compliance and learn what to expect during the process of certification, including actions needed prior to, during and after the audit.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how sites will implement the Standard.&nbsp;</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the <a href="https://www.brcgs.com/store/" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Store</a>, in addition to the pre-course materials provided. It is advised participants must have working knowledge of HACCP.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course, participants will be assessed with an exam.&nbsp;</p><p style="color: rgb(77, 77, 79); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(77, 77, 79);"><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">This course is part of the</span><a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">.</span></p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course participants will be able to:&nbsp;</p><ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Explain what is required to comply with the requirements of the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe the scope of companies and products covered by the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe what to expect from your BRCGS audit&nbsp;</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Prepare for an audit to the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Apply resource tools available for compliance and support from BRCGS</p><br fr-original-style="" style="box-sizing: border-box;"></li></ul>

This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard. It is designed to equip delegates with the knowledge of how to successfully implement the requirements of the Standard on site. Participants will discuss activities which develop a culture to maintain compliance and learn what to expect during the process of certification, including actions needed prior to, during and after the audit.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how sites will implement the Standard. 
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided. It is advised participants must have working knowledge of HACCP.
At the end of the course, participants will be assessed with an exam. 
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Explain what is required to comply with the requirements of the Standard
Describe the scope of companies and products covered by the Standard
Describe what to expect from your BRCGS audit
Prepare for an audit to the Standard
Apply resource tools available for compliance and support from BRCGS

Official BRCGS Food Safety Issue 9 course. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner.
Exam and Certificate fee included in the price.

BRCGS Food Safety Issue 9 - For Sites (2 Days)

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(35, 35, 51);">This course is taught using a set of principles and methodologies developed by us to give participants a system they can always refer to any time they get stuck trying to interpret financial information.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">We have developed a 4-box model for teaching accounting which makes the process of breaking down any transaction natural for the nonaccountant. The system works without the need to learn any double-entry accounting, participants apply the system and instinctively know what to do.&nbsp;</span><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">This is followed up with another 4-box model we developed to completely break down financial analysis and ratios into the most fundamental metrics required of every role in an organization. &nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">Our approach is to teach financial analysis by making each participant aware of how their role and actions directly impact the company&#39;s bottom line.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">Participants will also be able to interpret the financial statement in a natural way using a third model (the 5 Box Balance Sheet) to analyze business performance effectively.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">This instructor-led course includes:&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;2 weeks of self-paced essential learning content that you are to complete before the instructor-led live virtual sessions begin.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;4 instructor-led virtual sessions of 2 hours each. Each Session will have a 15-minute break.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;Intersession Assignments that you are expected to complete and discuss in your preassigned groups during the session.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;1 Capstone Project&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; Lifetime access to our LMS where you will have free access to the trainer, other participants, and resources including knowledge videos.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;Access to our community of life-long learners.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;Downloadable Certificate you can link to your LinkedIn Page</strong>&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">We look forward to seeing you in Class!!!</span></p>

dbrownconsulting

Financial Intelligence

Finance For Non Finance Managers

Finance Fundamentals

Elevate your role as a non-finance manager by learning to interpret financial information and analysis and learn how your actions directly impact the company's bottom line. 

562 Learning courses in Belfast

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment

By EnergyEdge - Training for a Sustainable Energy Future

Steam Turbine Technology

By EnergyEdge - Training for a Sustainable Energy Future

Commissioning of Electrical Equipment

By EnergyEdge - Training for a Sustainable Energy Future

Electrical Generators, Excitation Systems and Governing Systems

By EnergyEdge - Training for a Sustainable Energy Future

Sale & Purchase of Oil & Gas Properties

By EnergyEdge - Training for a Sustainable Energy Future

Self Myofascial Release (SMR) Workshop

By Platinum Training Institute

Transmission Lines: Design, Analysis and Applications

By EnergyEdge - Training for a Sustainable Energy Future

Combustion Engineering for Coal Fired Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Design Of Circulating Fluidized Bed Boilers

By EnergyEdge - Training for a Sustainable Energy Future

Root Cause Analysis for Boilers and Steam Cycle Failures

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location