282 Operations courses

QA LEVEL 2 AWARD IN PRINCIPLES OF MANUAL HANDLING (RQF) * Half day course (face to face), 2 sessions (virtual) * Gives learners a good understanding of why manual handling is so important * Gives learners the knowledge of safe manual handling principles * Our full day course, Safe Moving and Handling [https://pochat-training.cademy.co.uk/safe-moving-and-handling], will also give learners sound practice in manual handling -------------------------------------------------------------------------------- Course Contents: * Common manual handling injuries * Manual handling laws * Responsibilities of employers and employees * Manual handling risk assessments * Safe movement principles associated with manual handling, including the body’s: * Recognising a range of mental health conditions: * Musculoskeletal system * Centre of gravity * Lever system * Manual handling equipment: * Types of manual handling aids and equipment * Maintenance and requirements for testing * Theory of safe manual handling principles, including: * Preparing for a lift * Solo lifting, carrying and lowering an object * Team manual handling BENEFITS OF THIS COURSE: * 498,000 people people suffered from musculoskeletal disorders due to work related activities in 2018/2019 * Of those, 138,000 were from people who had not suffered this before * 6.9 million working days, or 26,436 working years, were lost due to work-related musculoskeletal disorders that year * On average, each of those people had to take 16 days off work, with many never fully recovering from those injuries * This course is there to help people avoid getting injured in the first place, saving both human suffering and cost to the employer and employee both -------------------------------------------------------------------------------- ACCREDITED, OFQUAL REGULATED QUALIFICATION Our Principles of Manual Handling Course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards [https://qualsafeawards.org/]. This means that you can be rest assured that your Principles of Manual Handling Course fulfills the legal requirements and is a very good way to make sure you and your employees are trained in the principles of Manual Handling. The Ofqual Register number for this course is 603/2720/0 --------------------------------------------------------------------------------

QA LEVEL 2 AWARD IN SAFE MOVING AND HANDLING (RQF) -------------------------------------------------------------------------------- * Full day course (classroom) * Provides a good understanding of the principles of safe manual handling * Gives learners the ability to apply the principles of safe manual handling -------------------------------------------------------------------------------- BENEFITS OF THIS COURSE: * 470,000 people people suffered from musculoskeletal disorders due to work related activities in 2020/2021 * Of those, 162,000 were from people who had not suffered this before * 8.9 million working days, or 37,083 working years, were lost due to work-related musculoskeletal disorders in 2019/2020 * This course is here to help people avoid getting injured in the first place, saving both human suffering and cost to the employer and employee both -------------------------------------------------------------------------------- COURSE CONTENTS: * Common manual handling injuries * Manual handling laws * Responsibilities of employers and employees * Manual handling risk assessments * Safe movement principles associated with manual handling, including the body’s: * Musculoskeletal system * Centre of gravity * Lever system * Manual handling equipment: * Types of manual handling aids and equipment * Maintenance and requirements for testing * Manual handling practical sessions: * Preparing for a lift * Solo lifting, carrying and lowering an object * Team manual handling -------------------------------------------------------------------------------- ACCREDITED, OFQUAL REGULATED QUALIFICATION: Our Safe Moving and Handling Course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards [https://qualsafeawards.org/]. This means that you can be rest assured that your Manual Handling Certificate fulfills the legal requirements and is a very good way to make sure you and your employees are trained appropriately in Manual Handling. The Ofqual Register number for this course is 603/2744/3 --------------------------------------------------------------------------------

The “ISO 22301:2019 Lead Implementer ” course provides comprehensive training in the ISO 22301:2019 standard and all its requirements from the Implementer ’s point of view, as well as basic skills necessary to execute the requirements. It’s a practical-oriented training that should be considered “a must” for every ISO 22301:2019 Implementer. This intensive course is specifically designed to participants to serve as ISO 22301:2019 Lead Implementers. The interactive training program, complete with quizzes, will provide the necessary technical knowledge and understanding of all ISO 22301:2019 requirements to implement the requirement of the standard.

Course Overview Lean Six Sigma is a proven combination of tools and techniques that has been used by leading organizations to improve efficiency, productivity and customer satisfaction. It achieves this by providing a rigorous and structured methodology and team approach to problem solving which leads to quality and performance improvements. Our Lean Six Sigma Green Belt training is a seven-day programme which includes an in-house project designed to provide participants with an understanding of the Six Sigma Green Belt Process and it’s practical application.  Trainees will enhance their current skills by developing a thorough understanding of the DMAIC (Define/Measure/Analyse/Improve/Control) methodology and its applications, creating a culture of problem solving and continuous improvement in their organization. In this way, key personnel become valuable contributors in achieving the larger goals and objectives of their organization. This powerful tool will enable you and your team to identify opportunities for improvement, and assist in the implementation of projects leading to efficiency by equipping key personnel with the expertise and the tools needed to manage and participate in cost reduction projects with innovative solutions.  Trainees will learn how to use data to pinpoint processes that need to be analysed and improved using the Six Sigma Tool sets, with a view to problem solving, increasing operational efficiency, improving productivity and customer satisfaction and the company’s overall business results.   Our Lean Six Sigma Green Belt programme incorporates a project to be undertaken in your own organization during and after the training modules. This allows you to apply the tools, in your own working environment, to processes that are known to you, making the training relevant, and also leaving a improvement with measurable results in your organization. MINITAB (trial version can be downloaded free) and Excel software are used by participants during the training sessions and to complete their projects. Structure of the Course This 7-day training programme is divided into three modules as follows:  * Define / Measure Phase - 3 days from June 24th to 26th,  2024 * Analyse Phase - 2 days on September 16th & 17th, 2024 * Improve / Control Phase - 2 days on October 21st & 22nd, 2024 A gap of 4 weeks between each module provides an opportunity for trainees to work on a project within their workplace, applying the methodology and tools learned during the previous module. Extra support can be provided between modules for each trainees with their project work. We provide a Lean Six Sigma Green Belt Manual for all delegates, and a Certification is awarded upon completion of the Green Belt training and ONE project by each trainee in which the targeted outcomes have been achieved. An outcome report and/or project presentation which demonstrates the use of the tools and methodology is required. Cost: £1,800 + VAT per person. What is included * Seven days of face-to-face training delivered in 3 modules as listed above * Project review and support for all participants during modules 2 & 3.  * Remote support available for the duration of the programme for trainees to consult with the trainer. * All training material, and a Lean Six Sigma Green Belt Manual for all delegates * Refreshments and lunch provided each day of training * Free car park for all delegates * Lean Six Sigma Green Belt certificate In-house Option This workshop can also be delivered in-house as a stand-alone training workshop or integrated into wider improvement activities. Contact us for more details at compete@cforc.org and we will be happy to discuss in the context of your own business needs. If you are not yet a member but are already thinking about joining CforC, you can find more information on how to become a member and the benefits by clicking here [http://www.cforc.org/join-us].

Level 6 NVQ Diploma in Construction Contracting Operations Management

ABOUT THIS TRAINING COURSE This five-day training course will cover aspects of FPSO operations with an emphasis on management of safety. A background of the methodology used to generate the various safety plans and codes used in the operational safety case will be covered. The course will also review general operational guidelines in the offshore environment to ensure that the operations are completed as designed. This will include offtake operations and maintenance processes for the plant and vessel as well as a session on subsea. Training Objectives To enable participants to obtain an in-depth understanding of FPSO operations, safety and maintenance: * Provide a broad overview of how an FPSO operation is set up and established in the field * Grasp the various methods used to moor the production units * Analyse information and methods required to establish the operation according to local and international regulations. * Assess the methods used to calculate the safety parameters and requirements to construct an approved valid safety case * Explore conditions to monitor during operations with regards to safety and structure * Inspect various types of hazards associated with production and produced materials * Review regular and emergency operational maintenance requirements * Examine cyclones and weather events causing disconnection * Comprehend manning, training requirements and operations including cargo Case studies and Exercises: The training course uses real life examples and case studies to explain the setup, preparation, implementation and operational activities required to successfully complete FPSO operations from a safety and maintenance perspective. This will allow the application of participants' newly-acquired knowledge. Case studies also stimulate independent thinking and discussion among the participants. Case Studies The case studies proposed for this course will include: * A group exercise to consider what is the minimum requirement for the production of a safety case * Generic plan for the development of a maintenance management system using computer software systems (e.g. Amos) * Construction of a UWILD plan to include scope and potential tendering requirements Quizzes The various quizzes can be expanded or arranged to suit the group/interests and topics covered but will generally include the following topics: * Mooring types and location where they are primarily used * Safety cases * Safety management systems * Process hazards and mitigation * UWILD components and regulations * Operations management * Offtake operations Target Audience The course is generally aimed at personnel who are involved in FPSO operations as either offshore crew or onshore support team members. This course will also greatly benefit the following groups but not limited to: * Process engineers * Surveyors * Facility engineers * Naval architects * Operations engineer * Health, Safety, Environment (HSE) specialists and managers * Maintenance engineers Course Level * Intermediate Training Methods The training course is presented in an interactive workshop format that allows for discussion. The course will be delivered through analysis of case studies and running examples of problems. Course Duration: 5 days in total (35 hours) The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training comprises of information supplemented by visual activities including photographs from various operations and videos of operational and safety activities. Interaction verbally will be necessary to achieve the best learning outcome from the materials. Course timings and breaks  0830 - Registration 0900 - Start of training 1030 - Morning break 1045 - Training recommences 1230 - Lunch break 1330 - Training recommences 1515 - Afternoon break 1530 - Training recommences 1700 - End of training Trainer Your expert course leader has been involved in the Oil and Gas industry for over 28 years in several different roles commencing as a second deck officer on FPSO's and moving through the industry from deck officer to Master, OIM and Field Superintendent. He has also been in charge of semisubmersible and fixed production platforms as field superintendent before moving ashore into senior management roles. On completion of industry specific activities, he moved to teaching roles at South Tyneside Maritime College in the department of marine and simulation and presented live courses to maritime students from cadet to Master.  Prior to returning to Perth in March 2019, he was training manager for a subsidiary of Gaz Transport and Technigaz of France. He has a Master Class 1 certificate with endorsements for hazardous cargoes and a Graduate Certificate in Business Administration as well as multiple course certificates required to operate FPSO's, platforms and semisubmersible facilities. He has been involved in the preparation of national standards for Safety Cases (Australia); Designing and structural setup of competency-based training systems in South East Asia. He was also involved in the development of minimum standards, competency profiles position based and preparation and implementation of training plans to ensure competency in the local staff in Asian operations. He was part of the development team for minimum standards of offshore safety in Australian offshore operations including the implementation of the Common Safety Training Program (CSTP). He was also involved in implementing training plans for both simulator and classroom based courses in LNG operations and cargo tank design and construction. Highlighted work experience: * Premier Petroleum Myanmar Ltd * Petronas Carigali * Newfield Australia (Cartier) Pty Ltd: * FPSO Jabiru Venture * FPSO Challis Venture * Onshore OIM * Australian FPSO Management Pty. Ltd. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Level 2 NVQ Certificate in Plant Operations - Operations Guide

OVERVIEW -------------------------------------------------------------------------------- It is very important to analyse financial operations within financial functions or outside financial functions. If they are utilized and implemented properly it will contribute towards the success of the business. This program will give you in-depth knowledge of financial operations and reporting supported by important aspects of theory together with practical methods and techniques.  This course is specially designed by experts who have a wealth of experience in the related field. In this course, you'll gain knowledge in financial operations and reporting as well as its foundations, methods and techniques. 

ABOUT THIS VIRTUAL INSTRUCTOR LED TRAINING (VILT) A large amount of geological data is acquired at a substantial cost when carrying out a drilling operation. Ensuring optimal quality of this information and effective reporting plays a key role during well design and drilling operations. In addition, there is much to benefit from the later usage of the data in field studies. A critical component that ensures favourable and positive results is the close co-operation between geological, drilling and well engineering departments. Comprising 5 half-day sessions, this Virtual Instructor Led Training (VILT) course aims to provide the required knowledge in order for the collaboration to be most effective and successful. This VILT course will comprise lectures interspersed with practical and interactive exercises and quizzes to promote better understanding. Training Objectives At the end of this VILT course, participants will be able to: * Understand the techniques used by wellsite geologists in formation evaluation via: * Quick-look analysis to assess reservoir and hydrocarbons * Mudlog data (lithology/cutting description, gas readings) * Grasp the application of wellsite data in exploration and development * Be able to read, assess and use drilling reports * Acquire an understanding of drilling problems caused by subsurface conditions * Understand the role and contributions of the geologist to the well maturation process Target Audience This VILT course is intended for geologists and other subsurface staff involved in drilling operations who would like to work and communicate more effectively with wellsite staff.  Please note that this VILT course is not a preparation course for a wellsite assignment. To be able to work independently on the wellsite, a more hands-on or on-site training would be required. Training Methods This VILT course will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 breaks of 10 minutes per day. Course Duration: 5 half-day sessions, 4 hours per session (20 hours in total). Trainer Your expert course leader has close to 20 years of experience as a geologist in the Oil & Gas industry. Her main interest and passion is in well planning and operations. She had previously worked as a production geologist and technical authority in NAM (Netherlands), and as a discipline advisor tasked to coach young staff in Bangalore. She has been active in internal training sessions on drilling hazards, mudwindow assessment and project management. She obtained an MSc in hard rock structural geology from the University in Utrecht, a PhD at Brown University (RI, USA) and a post-doctoral at the RWTH Aachen. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

Level 4 NVQ Diploma in Controlling Lifting Operations - Supervising Lifts