130 MOT courses in Coventry

The IMI Award in MOT Test Centre Management, has been developed with the Driver and Vehicle Standards Agency (DVSA) to provide learners with the qualification, knowledge and skills necessary to manage MOT Vehicle Test Centres. WHAT YOU WILL ACHIEVE Successful completion will give you a valuable academic qualification recognised by the DVSA that demonstrates your skill and knowledge necessary to successfully run and manage an MOT station on a day to day basis as well as fully understanding the DVSA’s legislative and compliance requirements. COST OF COURSE The cost of this course is £544.50 + VAT per candidate. Please contact us for further information. COURSE OVERVIEW The MOT Test Centre Manager Training course and assessment is normally ran over 2 1/2 days in total with the 1/2 day revision and online test often ran a few days after the initial training to allow candidates time to absorb the information. The main focus of the courses will teach you how to: * manage the legislative and compliance knowledge required to manage an MOT test centre * effectively encourage improvements in customer service * develop and supervise staff with an MOT centre * understand the MOT test centre quality systems and audits Assessment is by an open book online IMI test. WHO SHOULD ATTEND The MOT Test Centre Manager Training qualification is primarily developed for learners who wish to run an MOT Vehicle Test Station (VTS), or who will have direct responsibility for MOT operations at the VTS in the future. There are no formal entry qualifications for this course but learners MUST possess a good standard of written and spoken English as all MOT manuals, training and testing is conducted in English.

The IMI Level 2 Award in MOT Testing is the second stage in becoming a qualified MOT tester. It was developed alongside the Driver and Vehicle Standards Agency (DVSA) and is designed to equip learners with the qualification, knowledge and skills necessary to carry out and accurate and repeatable MOT Test Routine. Once you have successfully completed and passed this award, the final stage (stage 3) will be to complete a VT8 demonstration MOT test with a DVSA assessor to receive your certificate of competence. This will normally be conducted in your own Vehicle Testing Station (VTS) and successful completion will allow you to commence testing with immediate effect. WHAT YOU WILL ACHIEVE Successful completion of the IMI Level 2 Award in MOT Testing (Classes 4 and 7), will give you a valuable academic qualification recognised by the DVSA that demonstrates your skills and knowledge in conducting MOT testing. COST OF COURSE The cost of this course is £795 + VAT per candidate. COURSE OVERVIEW The main topics covered during the course are: * Working Safely within a Vehicle Test Centre * Working Relationships * Professional Development * Pre-Test Checks * Conducting the The MOT Test routine. Our courses are ran using a blend of practical and theory based study in small groups of 4 candidates in order to maximise on tutor contact time. Upon application, we will send you some pre-course learning materials and videos to study that will fully prepare you for what is a very demanding course and assessment. Completion of this work forms part of the guided learning hours for this course and is therefore mandatory. Candidates failing to complete this work may be refused entry onto the course. ENTRY REQUIREMENTS To be eligible to undertake the The IMI Level 2 Award in MOT Testing (Classes 4 and 7), you must: * have a current and full UK driving licence for the classes of vehicle you wish to test * be a skilled mechanic, with at least 4 years full-time employment in the service and repair of cars and vans. * have a suitable level 3 qualification (please see list below) * have no unspent convictions for criminal offences connected with the MOT testing scheme or the motor trade, or involving acts of violence or intimidation * and be of good repute. Click here [https://profitfromtraining.org.uk/courses/level-2-award-in-mot-testing-classes-1-and-2/] for acceptable entry qualifications. WHO SHOULD ATTEND The IMI Level 2 Award in MOT Testing (Classes 4 and 7), has been developed for individuals who would like to improve their career by becoming qualified MOT Testers. The course is run over four days with the final assessments being conducted on day 4.  Pre-course training material will be sent through 2 weeks before start date to complete prior attendance. The assessments consists of an online test of 40 questions and a demonstration MOT where you will be observed carrying out a full MOT demo test. The theory part of the test is ‘open book’ which means you will be able to use reference materials such as the MOT Testers Manual during the test. The pass mark for this test is 80%. Learners wishing to undertake this course MUST poses a good standard of written and spoken English as all MOT training and testing is conducted in English.

The IMI Level 2 Award in MOT Testing (Classes 1 and 2) was developed with Driver and Vehicle Standards Agency (DVSA) to provide learners with the knowledge and skills required to perform the MOT Test Routine on mopeds and motorcycles.

The IMI Light Vehicle Inspection Technician Accreditation is for experienced mechanics who would like to gain recognition for their skills and knowledge. It is also accepted by the Driver and Vehicle Standards Agency (DVSA) as the stage 1 entry qualification for mechanics and technicians who wish to train to become an MOT Tester for class 4 and 7 vehicles (cars and vans) It is normally valid for 3 years and successful candidates, as well as receiving a certifcate, photo card and pin badge, will also be entered on to the IMI Professional Register. This is a public-facing register to showcase individuals working in the motor industry, who have been recognised for their experience, professionalism and commitment to ethical working practices. However, there will be no requirement for you to re-accredit if you go on to complete your IMI Level 2 Award in MOT testing (classes 4 & 7) within the 3 year period. As an Inspection Technician you must be able to work unsupervised – ideally, you should be in full time employment with at least 3 years experience (4 years if you wish to become an MOT tester) to ensure you are familiar with the techniques for vehicle servicing, inspection and system(s) diagnosis. There are 5 practical assessments for this route and two online exams, one containing 30 questions and a second containing 10 questions. Please click on the links below to get an overview of the contents of each assessment. * AOM – 071 – Emissions System – Inspection [https://profitfromtraining.org.uk/wp-content/uploads/2020/09/emissions_system_inspection.pdf] * AOM – 072 – Electrical System – Inspection [https://profitfromtraining.org.uk/wp-content/uploads/2020/09/electrical_system_inspection.pdf] * AOM – 073 – Braking Systems – Inspection [https://profitfromtraining.org.uk/wp-content/uploads/2020/09/braking_system_inspection.pdf] * AOM – 074 – Steering and Suspension Systems – Inspection [https://profitfromtraining.org.uk/wp-content/uploads/2020/09/steering_and_suspension_systems_inspection.pdf] * AOM – 075 – Vehicle Structure – Inspection [https://profitfromtraining.org.uk/wp-content/uploads/2020/09/vehicle_structure_assessment.pdf] * AOM – 076 – Vehicle Appraisal – Inspection [https://profitfromtraining.org.uk/wp-content/uploads/2020/09/vehicle_appraisal_inspection.pdf]   5 DAY TRAINING AND ASSESSMENT. This training is aimed at experienced technicians who might need some training input prior to assessment. The assessments will take place over a 5 day period with the online assessment taking place mid week to allow for any re-sits that may be necessary. You will receive a copy of Tom Denton’s 4th edition Advanced Automotive Fault Diagnosis book which you can use in the intervening period to study and practice your knowledge and skills prior to attending the course. PLEASE NOTE THESE ASSESSMENTS ARE TO A LEVEL 3 STANDARD AND ARE DESIGNED TO BE TOUGH. THEY CONCENTRATE ON FAULT FINDING WITHIN A GIVEN TIMESCALE. SUCCESSFUL CANDIDATES WILL FIND ALL OF THE FAULTS WITHIN 1 HOUR. THE NEXT STEP If this accreditation is of interest to you, particularly if you wish to become an MOT tester, have a go at our initial assessment test. Our administrator will be in touch with you once we receive your result so that we can best advise you on the way forward.

ABOUT THIS VIRTUAL INSTRUCTOR LED TRAINING (VILT)  Electrical machines, mainly power transformers and electric motors are critical equipment that run production, and it must operate without any abnormalities. A wide variety of tests and standards have been developed to assist manufacturers and users of motors and transformer winding, assess the condition of the electrical insulation. The objective of this training course is to provide an understanding of power transformers and electric motors, their materials, components, and how they operate. It will also emphasize the importance of transformer life management, especially for those transformers and electric motors which have been in operation for than 10 years. The course will address in detail all aspects related to transformer principles, calculations, operation, testing and maintenance. Training Objectives This course aims to provide participants with the understanding of the fundamentals and constructional features of power transformers and electric motors, with particular reference to the design, testing, operation and maintenance of transformers in power systems. Delegates will gain a detailed appreciation of the following: * Practical solutions for specifying, operating and maintaining power transformers and electric motors in a utility or plant environment * Comprehensive understanding of principles, protection, maintenance and troubleshooting of power transformers and electric motors * The necessary safe procedures relating to transformer operation and related circuitry * Understand the principles of operation of the transformer and electric motors * Identify the different features of power transformers and electric motors * Appreciate the principles of transformer design, ratings, winding, core structure and materials, insulation and cooling methods, insulation and lifetime * Utilize thermal limits and loading guides of transformers * Analyze transformer and electric motors failure modes Target Audience * Engineers of all disciplines * Managers * Technicians * Maintenance personnel * Other technical individuals Course Level * Basic or Foundation Training Methods The VILT will be delivered online in 4 half-day sessions comprising 4 hours per day, with 1 x 10 minutes break per day, including time for lectures, discussion, quizzes and short classroom exercises. Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end the course. Trainer Our key expert is actively involved in electrical inspections, energy audits, energy efficiency and technical consultation for M&E activities for industrial and commercial sectors. He is involved in testing and commissioning works of factory substations of up to 132kV system. He previously worked for Jimah coal-fired power plant in Port Dickson for 9 years with his last position being Electrical Maintenance Section Head. He was involved in the commissioning of coal-fired power plant mainly with 500kV generator transformer, 934 MVA generator, and up to 33kV MV motors and switchgear panels. Our key expert has managed the maintenance team to perform routine maintenance activities (together with supporting tools such as motor lube oil analysis, infrared thermography analysis, transformer oil analysis) & electrical troubleshooting and plant outages for critical and non-critical equipment. Besides that, our key expert has published several IEEE conference papers and journals such as: * (2009). Effectiveness of auxiliary system monitoring & continuous hydrogen scavenging operation on hydrogen-cooled generator at power plant. In Energy and Environment, 2009. ICEE 2009. 3rd International Conference on (pp. 151-160). IEEE. * (2010). Study on electric motor mass unbalance based on vibration monitoring analysis technique. In Mechanical and Electrical Technology (ICMET), 2010 2nd International Conference on (pp. 539-542). IEEE. * (2012). Re-Design of AC Excitation Busduct based on Infrared (IR) Thermography: Condition-Based Monitoring (CBM) data analysis. eMaintenance, 101. * (2016). Energy Saving Studies for a University Campus: An Educational-Based Approach, 3rd International Conference on Language, Education, Humanities and Innovation 2016. * 'Grid-tied photovoltaic and battery storage systems with Malaysian electrcity tariff - A review on maximum demand shaving.' Energies 10.11 (2017): 1884 * 'Techno-Economic Optimization of Grid-Connected Photovoltaic (PV) and Battery Systems Based on Maximum Demand Reduction (MDRed) Modelling in Malaysia.' Energies 12.18 (2019): 3531 POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

OVERVIEW -------------------------------------------------------------------------------- Understanding the roles and responsibilities of HR and Training specialists is very important as they play a very important role in any business. It acts as a bridge between all the departments of the work and holds many responsibilities to manage issues, and problems, making sure work is progressing efficiently, resolving disputes and many more which becomes a core part of HR. Human Resources (HR) plays a crucial role in all sizes of businesses. It is an essential part of making success along with the development of the organization. The main focus of HR is to train employees, retail talent and implement employee motivation programs The development and preparation of training specialists and HR programs are designed for individuals who are seeking a future in this field. The topics are related to the working of training specialists and HR like teamwork, motivation, recruitment and performance appraisal.

OVERVIEW -------------------------------------------------------------------------------- The Equality and Diversity, Inclusion training focus on key areas where equality covers areas with people's rights and law covering diversity, handling and eradicating unlawful discrimination with the motive to have an efficient workflow environment. This is very challenging and requires a lot of knowledge, skills and understanding along with interpersonal skills to carry on Equality and Diversity.

OVERVIEW -------------------------------------------------------------------------------- This course is incredibly elegant to feed psychological feature feeling and confidence needed in an everyday work state of affairs so as to run the team and organisation to attain sensible results. it'll facilitate building your trust and loyalty and enhance your skills and your behaviour additionally it'll facilitate setting objectives, motivating and communicating together with your folks.

ABOUT THIS TRAINING COURSE Well interventions have a large opportunity to enhance well production if correctly designed and implemented. Conversely, they can have a large negative impact on production if they're not. The Well Intervention & Productivity School (WIPS) is designed to help well intervention specialists, well service supervisors, and petroleum engineers become more aware of the problems that can arise in the planning and execution of well interventions. This 5 full-day course is designed to make those that attend aware of how their job can directly impact the productivity. Early identification of problems in wells and effective interventions to fix problems can have a significant impact by minimising lost oil through formation damage and non productive time. As well as discussing best practice, time will be made available for discussion relating to specific problems that may be affecting fields operated by members of the class. The course is a mixture of informal teaching and lectures. In addition, group exercises are used to reinforce the subjects covered during the lectures. This encourages cross discipline awareness, communication and motivates team building. The course has recently been updated in the areas of Subsea and HPHT interventions. This course can also be offered through Virtual Instructor Led Training (VILT) format. Training Objectives Upon completion of this course, the participants will be able to: * Identify the main reasons for performing well interventions. * Identify the main formation damage mechanisms and understand how to prevent them. * Improve your knowledge and understanding of well barriers. * Improve your knowledge of pumping and stimulation operations. * Improve your knowledge of wireline, coiled tubing and hydraulic workover operations. Target Audience The course is aimed at all engineers and contractors involved in the planning and execution of well interventions. This is a school where engineers and supervisors can hone their skills, especially at a time when increased production is a high priority. In the past, course attendees have been a mix of Petroleum engineers, Well Intervention engineers, Reservoir and Drilling engineers, Production Operators, Wellsite supervisors, as well as Geologists. In recent years, delegates have come from a wide range of disciplines and backgrounds. Experience before coming on the course has varied from no field experience and no experience of planning and programming well interventions through to many years working in well interventions. In order to be able to best adapt the course to the delegates expectations, you will be required to submit a pre-course questionnaire upon submission of your registration. Course Level * Intermediate Trainer Your expert course leader has over 40 years in the oil industry. During that time, he has worked exclusively in well intervention and completions. After a number of years working for intervention service companies (mostly slickline), he joined BP as an offshore well service supervisor. He was responsible for the day-to-day supervision of well intervention work on many of BP's North Sea platforms and subsea wells. This included coil tubing, e-line, slickline, stimulation and well test operations. An office-based role as a well operations engineer followed. He was responsible for planning, programming and organising of all the well intervention work on the Bruce and later the Magnus fields. In 1995, he moved into completion design. Since then, he has designed many platform and sub-sea completions, often travelling to the rig site to oversee the installation. In addition to his day-to-day work as a completion engineer, he regularly teaches completion and well intervention courses all over the world. He is also the author of the book, Well Control for Completions and Interventions, Gulf Publishing - April 2018. He has also appeared as an expert witness ant the International Court of Arbitration.   POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Everyone has what it takes to become an effective leader, but first you must learn the skills needed to succeed in a position of responsibility. Our program will help people nurture the talent within and allow managers to lead confidently. Sometimes, working longer hours isn’t the right approach, as you risk burning out and abandoning the task at hand. Instead, effective leadership teaches you how to organise your workload, practice better time management and learn the power of delegation.