Name: Compressors & Pumps: Selection, Applications, Operation, Troubleshooting and Maintenance
Price: 2699 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Wind has surpassed hydro-power generation in many countries recently. Wind energy offers many advantages, which explains why it's one of the fastest-growing energy sources in the world. The following are the advantages of wind power:</p>
<ul>
<li>Wind power is cost effective: Land-based utility-scale wind is one of the lowest-priced energy sources available today</li>
<li>The fuel for wind power is free. This reduces the operation and maintenance cost of wind power plants significantly</li>
<li>Wind is a clean source of power generation that does not pollute the air like power plants which rely on combustion of fossil fuel</li>
<li>Wind power plants create jobs. Wind turbine technician is the fastest growing career in many countries</li>
<li>Wind enables industry growth and competitiveness due to its low cost</li>
<li>Wind power is a domestic source of energy. The wind supply is abundant and inexhaustible. The wind power generation capacity has become the largest source of renewable power in many countries</li>
<li>Wind turbines can be built on existing farms and ranches. This greatly benefits the economy in rural areas, where most of the best wind sites are found. Wind power plant owners make rent payments to the farmers or ranchers for the use of their land, providing landowners with additional income</li>
</ul>
<p>This 5 half-day course covers all aspects of wind power plants including evaluation of a potential location for a wind power plant using wind data and using statistical distributions to approximate available wind energy at a wind power plant site. It provides also an in-depth understanding of all wind power plant equipment including wind turbines, generators, instrumentation and control systems, drive trains, gearboxes, doubly fed induction generators, synchronous generators, nacelles, towers, transformers, etc.</p>
<p>The economics of a wind power plant including economic analysis of wind power generation, economic comparison between a large- and small-scale wind power plant, economic decision making, rate of return from a wind power plant, economic life and replacement of a wind power plant as well as the cost of electricity from wind power plants are covered in detail in this course. A thorough explanation of the design, operation and maintenance of on-shore and off-shore wind farms is presented in detail in this course as well as all the significant improvements that have been made to wind power generating plants during the last two decades.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Evaluation of a Potential Location for a Wind Power Plant Using Wind Data: </span></strong><span>Learn how to evaluate the potential location for a wind turbine power plant using wind data.</span></li>
<li><strong><span>Using Statistical 'Rayleigh' Distribution to Approximate Available Power Generation from a Wind Turbine at a Specific Site:</span></strong><span> Learn how to use statistical 'Rayleigh' distribution to approximate available power generation from a wind turbine at a specific site.</span></li>
<li><strong><span>Calculate the Wind Energy Available at a Site: </span></strong><span>Gain an understanding on how to calculate the wind energy available at a site.</span></li>
<li><strong><span>Rated Capacity of a Wind Facility and Capacity Factor: </span></strong><span>Understand how to determine the rated capacity of a wind facility and its capacity factor.</span></li>
<li><strong><span>Designing a Wind Power Generating Plant:</span></strong><span> Learn how to design a wind power generating plant.</span></li>
<li><strong><span>Wind Power Plant Equipment Operation and Maintenance:</span></strong><span> Understand the operation and maintenance requirements for all wind power plant equipment including wind turbines, generators, nacelles, towers, transformers, etc.</span></li>
<li><strong><span>Wind Power Plant Instrumentation and Control Systems: </span></strong><span>Gain a thorough understanding about the latest instrumentation and control systems of wind power</span> <span>plants.</span></li>
<li><strong><span>Economics of Wind Power Plants: </span></strong><span>Gain a thorough understanding of the economics of wind power plants including economic analysis of wind power generation, economic comparison between a large- and small-scale wind power plant, comparison of alternatives, rate of return from a wind power plant, financial statements for a wind power plant, cost of electricity from a wind power plant, and levelized cost of wind energy.</span></li>
</ul>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a soft copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>POWER GENERATION HANDBOOK' second edition, published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Wind Power Generating Plant Manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Wind Power Generation: Advantages, Design, Site Selection, Equipment Selection, Operation and Maintenance, On-Shore and Off-Shore Wind Farms, Economics, Rate of Return, and Cost of Electricity from Wind Power Plants

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2>About this Training</h2>
<p>The expanding human population and industrialisation are increasing the demand for energy worldwide. This has resulted in numerous challenges such as environmental pollution, reliable supply of fossil fuels, and increased demand of electricity supply, which must be overcome. To fulfil the energy demands and overcome these challenges, numerous projects and funds are involved in finding an adequate solution.</p>
<p>Transport accounts for around one-fifth of global carbon dioxide (CO2) emissions and road travel accounts for three-quarters of transport emissions. Most of this comes from passenger vehicles. Emission limits are increasingly stringent, and the fuel industry must change its approach to product formulation to meet the challenge.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will be able to:</p>
<ul>
<li>Get a clear overview of the different types of bio and alternative fuels</li>
<li>Understand how different bio and alternative fuels are produced</li>
<li>Have an overview of feedstock utilised for biofuels production</li>
<li>Realize how the biofuels production could be integrated in modern refinery</li>
<li>Understand how bio and alternative fuels function as single and blended fuels</li>
<li>Understand what impact bio and alternative fuels have on car engine</li>
<li>Get an overview of the environmental impact of bio and alternative fuels</li>
<li>Get the overview of regulation related to bio and alternative fuel</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The course is intended for individuals who are interested in or developing in the field of bio and alternative fuels. The following personnel will benefit from the knowledge shared in this course:</p>
<ul>
<li>Refinery Technical Personnel</li>
<li>Trading and blending personnel</li>
<li>Sales, marketing, and product trading personnel</li>
<li>Laboratory supervisors and technical personnel</li>
<li>Policymakers</li>
<li>Professionals who are interested in or developing in the field of bio and alternative fuels</li>
<li>Process, project, and consultant engineers involved in bioenergy, petrochemical and chemical industries</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is an experienced manager with more than 25 years of operational experience in the downstream Oil &amp; Gas industry. She is a recognised expert in conventional, biofuels and alternative fuels with extensive experience in the crude selection process and formulation of finished products including product portfolio strategy, product quality road mapping and benchmarking. She is a long-time laboratory manager with comprehensive experience in laboratory processes, including financing, benchmarking, efficiency improvement and total quality management processes. </p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Biofuels and Alternative Fuel Sources

London

<h2>ITIL® 4 Strategist: Direct, Plan and Improve: In-House Training</h2>
 <p>The ITIL® 4 Strategist: Direct, Plan, and Improve course is based on the ITIL® 4 Strategist Direct, Plan, and Improve candidate syllabus from AXELOS.</p>
 <p>This course is based on the ITIL® 4 Strategist: Direct, Plan and Improve IT exam specifications from AXELOS. With the help of ITIL® 4 concepts and terminology, exercises, and examples included in the course, candidates acquire the relevant knowledge required to pass the certification exam.</p>
 <p>This course provides the practical skills necessary to create a 'learning and improving' IT organization, with a strong and effective strategic direction. It was designed to provide practitioners with a practical and strategic method for planning and delivering continual improvement with necessary agility. It covers both practical and strategic elements, making it the universal module that is a key component to both ITIL® 4 Managing Professional and ITIL® 4 Strategic Leader streams.</p><h3>What You Will Learn</h3>
 <p>At the end of this course, participants will be able to:</p>
 <ul>
 <li>Understand the key concepts of direction, planning, improvement</li>
 <li>Understand the scope of what is to be directed and/or planned and know how to use key principles and methods of direction and planning in that context</li>
 <li>Understand the role of GRC and know how to integrate the principles and methods into the service value system</li>
 <li>Understand and know how to use the key principles and methods of continual improvement for all types of improvements</li>
 <li>Understand and know how to use the key principles and methods of Communication and Organizational Change Management to direction, planning and improvement</li>
 <li>Understand and know how to use the key principles and methods of measurement and reporting in direction, planning, and improvement</li>
 <li>Understand and know how to direct, plan, and improve value streams and practices</li>
 </ul><section>
                    <h3>Course Introduction </h3> <ul> <li>Let's Get to Know Each Other </li> <li>Course Overview </li> <li>ITIL® 4 Certification Scheme </li> <li>Course Learning Objectives </li> <li>Course Components </li> <li>Course Agenda </li> <li>Exercises </li> <li>Case Study: Axle Car Hire </li> <li>Case Study: HandyPerson on Demand </li> <li>Exam Details </li> </ul> <h3>Core Concepts of DPI </h3> <ul> <li>Key Terms Covered in the Module </li> <li>Module Learning Objectives </li> <li>Basics of Direction </li> <li>Basics of Planning </li> <li>Basics of Improvement </li> <li>Other Core Elements </li> </ul> <h3>DPI through Service Value Chain and Guiding Principles </h3> <ul> <li>Key Terms Covered in the Module </li> <li>Module Learning Objectives </li> <li>DPI of the SVS </li> <li>DPI of Guiding Principles </li> </ul> <h3>Role of Direction in Strategy Management </h3> <ul> <li>Key Terms Covered in the Module </li> <li>Introducing Strategy Management </li> <li>Developing Effective Strategies </li> </ul> <h3>Implementation of Strategies </h3> <ul> <li>Key Terms Covered in the Module </li> <li>Module Learning Objectives </li> <li>Managing Risks </li> <li>Making Decisions through Portfolio Management </li> <li>Directing via Governance, Risk, and Compliance (GRC) </li> </ul> <h3>Introduction to Assessment and Planning </h3> <ul> <li>Key Terms Covered in the Module </li> <li>Module Learning Objectives </li> <li>Core Concepts of Assessment </li> <li>Conducting Effective Assessments </li> <li>Core Concepts of Planning </li> </ul> <h3>Assessment and Planning through VSM </h3> <ul> <li>Key Terms Covered in the Module </li> <li>Module Learning Objectives </li> <li>Introducing VSM </li> <li>Developing Value Stream Maps </li> <li>Knowing More About VSM </li> </ul> <h3>Measurement, Reporting, and Continual Improvement </h3> <ul> <li>Key Terms Covered in the Module </li> <li>Module Learning Objectives </li> <li>Measurement and Reporting </li> <li>Alignment of Measurements and Metrics </li> <li>Success Factors and Key Performance Indicators </li> <li>Continual Improvement </li> </ul> <h3>Measurements and Continual Improvement through Dimensions and SVS </h3> <ul> <li>Key Terms Covered in the Module </li> <li>Module Learning Objectives </li> <li>Measurements for the Four Dimensions </li> <li>Continual Improvement of the Service Value Chain and Practices </li> </ul> <h3>OCM Principles and Methods </h3> <ul> <li>Key Terms Covered in the Module </li> <li>Module Learning Objectives </li> <li>Basics of OCM </li> <li>OCM throughout DPI and Service Value Chain </li> <li>Resistance and Reinforcement </li> </ul> <h3>Communication Principles and Methods </h3> <ul> <li>Key Terms Covered in the Module </li> <li>Module Learning Objectives </li> <li>Basics of Effective Communication </li> <li>Communication with Stakeholders </li> </ul> <h3>SVS Development Using Four Dimensions </h3> <ul> <li>Key Terms Covered in the Module </li> <li>Module Learning Objectives </li> <li>Organizations and People in the SVS </li> <li>Partners and Suppliers in the SVS </li> <li>Value Streams and Processes in the SVS </li> <li>Information and Technology in the SVS</li> </ul>


                </section>

IIL Europe Ltd

ITIL 4 Strategist: Direct, Plan and Improve: In-House Training

General Admission

<div fr-original-style="" style="box-sizing: border-box;">
</div>
<section fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<h2 fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">About this Training Course</strong><em fr-original-style="" style="box-sizing: border-box;">&nbsp;</em></h2>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This 3 full-day training course will introduce participants to the Microsoft Power BI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>&nbsp;software solution for extracting, manipulating, visualising and analysing data. This is a very practical, hands-on course that takes participants through a series of exercises which help users understand the Power BI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>&nbsp;environment, how to use the key areas of functionality, and how to apply the tools it contains to design and produce analyses of their own data.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The first two days focus on learning the key concepts and practising these using clean, simple datasets.&nbsp;The third day provides participants with the opportunity to apply what they&#39;ve learned to their own data. This makes the course far more relevant and meaningful for them, it allows our facilitator to help them structure their data models, queries and DAX formulas correctly, and it allows our facilitator to help them solve any additional problems that may arise but which were not covered as part of the standard the course. In addition, at the end of the day, each participant walks away with something of real, practical use for their job role. Many previous participants have remarked that they obtained the most value from the course during the third day because otherwise, they wouldn&#39;t be able to do what they need to do.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This is an introductory course and although it does not assume any prior experience with Power BI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>, participants will gain much more from the course if they have at least used Power BI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>&nbsp;a little prior to attending. Participants who have taught themselves Power BI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>&nbsp;will also benefit from attending as the course will fill-in a number of gaps in their knowledge and will also extend what they know. A general understanding of databases, Excel formulas, and Excel Pivot Tables is useful though not essential. Comprehensive course notes, exercises and completed solutions are included.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;">Microsoft&reg;&nbsp;PowerBI&reg; is a&nbsp;trademark&nbsp;of Microsoft Corporation in the United States and/or other countries.</em></strong></p>
</div>
</section>
<section fr-original-style="" style="box-sizing: border-box;">
<div id="accordion" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Objectives 

</div>
<div id="collapseOne" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Upon completion of this training course, participants will be able to:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Confidently use the Power BI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>&nbsp;solution, including Power BI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>&nbsp;Desktop, PowerBI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>.com and the Power BI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>&nbsp;Gateway</li>
<li fr-original-style="" style="box-sizing: border-box;">Extract data from a variety of data sources and manipulate the data extracted so it is ready for analysis</li>
<li fr-original-style="" style="box-sizing: border-box;">Combine data sources together and gain an introductory understanding of the M language</li>
<li fr-original-style="" style="box-sizing: border-box;">Write formulas using the DAX language for generating custom columns, measures and tables</li>
<li fr-original-style="" style="box-sizing: border-box;">Design reports and dashboards using a wide range of both built-in and custom visuals</li>
<li fr-original-style="" style="box-sizing: border-box;">Publish reports and dashboards to PowerBI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>.com</li>
<li fr-original-style="" style="box-sizing: border-box;">Share reports and dashboards with others using PowerBI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>.com</li>
<li fr-original-style="" style="box-sizing: border-box;">Customize reports and dashboards so that different user groups automatically see their own personalized views</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Target Audience 

</div>
<div id="collapseTwo" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This training course is intended for:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Financial Analysts</li>
<li fr-original-style="" style="box-sizing: border-box;">Accountants</li>
<li fr-original-style="" style="box-sizing: border-box;">Budgeting and planning specialists</li>
<li fr-original-style="" style="box-sizing: border-box;">Treasury</li>
<li fr-original-style="" style="box-sizing: border-box;">Risk Managers</li>
<li fr-original-style="" style="box-sizing: border-box;">Strategic Planners</li>
</ul>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This is an introductory course and although it does not assume any prior experience with Power BI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>, participants will gain much more from the course if they have at least used Power BI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>&nbsp;a little prior to attending. Participants who have taught themselves Power BI<sup fr-original-style="" style="box-sizing: border-box;">&reg;</sup>&nbsp;will also benefit from attending as the course will fill-in a number of gaps in their knowledge and will also extend what they know. A general understanding of databases, Excel formulas, and Excel Pivot Tables is useful though not essential. Comprehensive course notes, exercises and completed solutions are included.</p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Course Level 

</div>
<div id="collapsecl" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Trainer

</div>
<div id="collapseFive" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your expert course leader has a Masters (Applied Finance &amp; Investment), B.Comm (Accounting &amp; Information Systems), CISA, FAIM, F Fin and is a Microsoft Certified Excel Expert. He has over 20 years&#39; experience in financial modelling, forecasting, valuation, model auditing, and management reporting for clients throughout the world. He is skilled in the development and maintenance of analytical tools and financial models for middle-market companies to large corporates, at all levels of complexity, in both domestic and international settings.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">He has trained delegates from a wide variety of Oil &amp; Gas companies including Chevron, Woodside, BHP Billiton, Petronas, Carigali, Shell, Nippon, Eni, Pertamina, Inpex, and many more. He provides training in financial modelling for companies throughout the Asia, Oceania, Middle East and African regions.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Before his current role, he spent 6 years working in the Corporate and IT Consulting divisions of a large, multinational Chartered Accounting firm.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">He is the author of a number of white papers on financial modelling on subjects such as Financial Modelling Best Practices and Financial Model Auditing.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Highlights from his oil and gas experience include:</strong></p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Development of economic models to assist Decision Analysts modelling for a wide range of scenarios for multinational oil &amp; gas assets.</li>
<li fr-original-style="" style="box-sizing: border-box;">Auditing and further development of life of project models for Chevron&#39;s Strategic Planning Division analysing their North West Shelf assets.</li>
<li fr-original-style="" style="box-sizing: border-box;">Development of business plan and budgeting models for multinational oil &amp; gas assets.</li>
<li fr-original-style="" style="box-sizing: border-box;">Development of cash flow and taxation models for a variety of oil gas companies.</li>
<li fr-original-style="" style="box-sizing: border-box;">Consulting on Sarbanes Oxley spreadsheet remediation and risk assessment.</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &#39;One to One&#39; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;">
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Accreditions And Affliations

</div>
<div id="collapseSeven" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
               </div>
</div>
</div>
</div>
</section>

Power BI® - Business Data Analytics

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong><em> </em></h2>
<p>This 3 full-day course covers the design of systems for natural gas handling and treatment from the wellhead to the gas processing plant to achieve marketable products that meet desired product specifications.</p>
<p>This course will emphasize on field handling equipment and separation systems, dehydration, fluid measurement, sampling and analysis as well as introduction into reciprocating and centrifugal compressors. It will comprise interactive presentations including exercises/quizzes.</p>
<p>This course can also be offered through Virtual Instructor Led Training (VILT) format.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>At the end of the course, the participants will be able to describe and explain the following:</p>
<ul>
<li>Gas processing principles of dehydration (water removal) by absorption, adsorption, refrigeration and low temperature separation (JT effect) and basic associated equipment</li>
<li>Gas processing in-depth by absorption using glycol and glycol proper (Pre- Cooling requirements, Dew Point control and related processes). Glycol regeneration including principles of stripping, DRIZO and Coldfinger.</li>
<li>Process equipment involved for water removal by absorption. (Knock out drums; Contactor - absorber and internals, heat exchangers, re-boilers, pumps, filters and glycol storage).</li>
<li>Principles of gas metering and types of meter (Measurement Units (MJ, BTU, nM3, scf and conversions).</li>
<li>Typical gas contracts &amp; sales specifications.</li>
<li>Gas pipeline operations.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>Production and processing personnel involved with natural gas and associated liquids to acquaint or reacquaint themselves with gas conditioning and processing unit operations. This course is for <strong>production operations engineers, operations field supervisors, facility engineers, process engineers, design engineers, operations personnel and others who select, design, install, evaluate or operate gas processing plants and related facilities</strong>.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has more than 25 years of accumulated experience in the Oil &amp; Gas Industry, particularly in LNG / Offshore LNG Industry as Project Manager (8 years) and Process Technology Design (12 years). From 2010 to 2012, he worked for TOTAL E&amp;P as Manager of R&amp;D activities related to LNG, FLNG, Gas Treatment and Safety Engineering. From 1992 to 2010, he worked for Technip, spending 12 years (1992 to 2004) in the Process and Technology Division, where he was the Principal Engineer on gas treatment and LNG projects such as Yemen LNG and Nigeria LNG. From 2004 to 2010, he was actively involved in the development of Technip Offshore LNG technologies as Project Manager - several patents filed, author or co-author of different publications on LNG transfer technologies.</p>
<p>He has also been a member of:</p>
<ul>
<li>the Foreign Advisory Committee on the 2nd Trondheim Technology Gas Conference, Norway, 2-3 November 2011</li>
<li>the Steering Committee on the SPE Forum 'Economic and Sustainability Challenges in the Future Development of Sour Gas', Bali, Indonesia, 8-13 May 2011</li>
<li>The Technip 'Experts Network' as 'Main Expert - LNG' for several years</li>
</ul>
<p>He holds a 'summa cum laude' master's degree in Chemical Engineering from Rome University 'La apienza' (1992) and has been a member of the Italian Register of Engineers.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Gas Conditioning and Processing

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This interactive training course and workshop session is developed to provide a catalyst for transformation of the legacy systems and adapting to the upcoming trends in the near future in the LPG supply chain. The course curriculum is based on overcoming the challenges of cost and quality enhancement. Both challenges encompass critical review of each aspect from production to transportation with safety of operations and zero loss of energy, thereby enhancing revenue.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>This course is developed to meet the needs LPG producers, Gas Tankers and Terminals operators, and fraternity of<br />
stakeholders, with the following underlying objectives:</p>
<ul>
<li>Conduct assessment of current standards and management systems in context of market forces and economics of<br />
demand and supply;</li>
<li>Explore impact of emerging markets and user segments of LPG transiting from oil or electricity use;</li>
<li>Identify avenues in need of production process review for enhancing the quality in terms of energy content of LPG;</li>
<li>Evaluate current and future trends in LPG transportation and the influence of regulatory regimes and incentive<br />
schemes, for investment in Storage Terminals and distribution networks;</li>
<li>Identify the operations and protocols to be adaptable for compliance with new regulations and trends;</li>
<li>Establish transportation and distribution cost control mechanism at optimum level; and</li>
<li>Develop guidelines and SOPs for contamination free transfer, loading and discharging of LPG Tankers.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This is a 'must attend' course if you are a:</p>
<ul>
<li>LPG Gas Producer</li>
<li>Process Specialist</li>
<li>Buyer</li>
<li>Trader</li>
<li>LPG Tanker Owner</li>
<li>Charterer, and</li>
<li>Management personnel holding responsible positions such as Director, General Manager, Commercial Manager, Business Development Manager, Legal Counsel, Post-Fixtures Manager, Fleet Manager, Marine &amp; Technical Superintendent, Senior Engineer or Middle Level Manager as part of succession planning.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The course will be delivered in 3 full-day sessions comprising 8 hours per day.</p>
<p>Course Duration: 3 full-day sessions, 8 hours per session (24 hours in total).</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><strong>Principal Management Consultant</strong></p>
<p>FAIADR, FACICA, FHKIoD, M.S.I.D, Member, AIPN</p>
<p>LL.M. (IP Laws), M. Sc. (Maritime Studies)</p>
<p>M, Tech (Knowledge Engineering), MBA</p>
<p>First Class CoC (DOT, UK), B. E. (Elect)</p>
<p> </p>
<p>Your expert course leader, during the last 45 year period, has worked and consulted in the industry verticals encompassing: Marine, Shipping &amp; Transport, Technology, Oil &amp; Gas Exploration &amp; Production, Petrochemical Process Plants and Power Plant Construction Projects, Logistics &amp; Warehousing, Offshore, Oil &amp; Gas Pipelines, Infrastructure Development Projects (Construction, Ports, Offshore Supply Bases, Oil &amp; Gas Terminals and Airports etcetera), EPCIC Contracts, and Shipyards, in South East Asia, Africa, Middle East, Americas and Europe.</p>
<p>He is a Principal Management Consultant in a consulting company in Hong Kong and Singapore, specializing in the fields of corporate management consultancy, international contracts reviews and alternative dispute resolutions services. He has been frequently engaged for assignments like due diligence, acquisitions, and mergers. The assignments often involved resolving various operational issues, contracts reviews, cost controls, project management matters and enhancement of international procurement and Supply Chain Management systems.</p>
<p>He continues to be actively engaged in advisory services for Remuneration, Audit and Risk Management Committees of public companies as well as MNCs. He has developed a special initiative for conducting audits of ERM Systems (Enterprise Risk Management) and valuation of intangible properties involving proprietary processes (IP), licensed production and intellectual property rights.</p>
<p>He graduated with a Bachelor's degree in Electrical Engineering, MBA in General Management, Master of Technology in Knowledge Engineering, Master of Science in Maritime Studies and LL.M. (IP Law). He also holds professional qualifications in arbitration, contracts laws, and marine engineering, including the Chief Engineer's First-Class Certificate of Competency (DOT, UK). He has been Associate, SIM University (SUSS) Singapore and taught on subjects including Business Continuity Planning and Risk Management.</p>
<p>He has served as Director and member of Board of Management, Governance Councils and Risk Management Committees of international organizations. He is admitted to various professional institutions as: 'Fellow', Australian Centre for International Commercial Arbitration (FACICA); Asian Institute of ADR (FAIADR), Malaysia; Hong Kong Institute of Directors (FHKIoD), Member, Singapore Institute of Directors (M.S.I.D.), and Member, Association of International Petroleum Negotiators (AIPN) USA.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

LPG Production, Storage, Transfer & Safety

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong><em> </em></h2>
<p>Exploration and production technology, equipment specification and processes have a unique language that must be conquered by executives such as you. A confident understanding of the technical jargon and a visual appreciation of the various pieces of equipment used provides for an overall 'big picture' of industry value chain. This serves as an excellent foundation for smooth communication and increased efficiency in inter-department project team efforts.</p>
<p>Gain a comprehensive overview of the entire value chain and process of oil &amp; gas upstream operations and business in this 3 full-day training course.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><strong>By attending this industry fundamentals training course, participants will be better able to:</strong></p>
<ul>
<li>Appreciate the dynamics of world energy demand &amp; supply and its impact on pricing</li>
<li>Understand the formation of petroleum reservoirs and basic geological considerations</li>
<li>Examine the exploration process to gain an overview of the technical processes involved</li>
<li>Gain a comprehensive overview of drilling activities - from pre-drilling preparation, through to well drilling, well evaluations and post drilling activities</li>
<li>Get familiarised with the common production methods and the different stages of its processes</li>
<li>Integrate your understanding of asset maintenance and downstream supply chain activities</li>
<li>Better visualise through video presentations the various exploration equipment/ technologies and understand the major cost components</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course will be useful and applicable, but not limited to:</p>
<ul>
<li>Accounting</li>
<li>Administration</li>
<li>Business Development</li>
<li>Commercial</li>
<li>Construction</li>
<li>E &amp; P IT / Data</li>
<li>Finance</li>
<li>Finance &amp; Treasury</li>
<li>Health &amp; Safety</li>
<li>Human Resource</li>
<li>Joint Venture Co-ordinators</li>
<li>Legal</li>
<li>Logistics</li>
<li>Materials Planning</li>
<li>Procurement</li>
<li>Sales &amp; Marketing</li>
<li>Senior Management</li>
<li>Sourcing</li>
<li>Strategic Planning</li>
<li>Supply Chain</li>
<li>Tender Contract</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<ul>
<li>Multi-media presentation methodology to enable better understanding and appreciation technical jargon and equipment applied in the field</li>
<li>A pre-course questionnaire to help us focus on your key learning objectives</li>
<li>Detailed reference manual for continuous learning and sharing</li>
<li>Limited class size to ensure one to one interactivity</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader worked for BP for 28 years as a Research Associate and Team Leader, working on Feasibility Studies and acting as a trouble shooter covering all aspects of BPs businesses. These covered field Development Project in the North Sea and several novel resource recovery techniques which were taken from Concept to Field Pilot trials in Canada. His specific work in the offshore area covered Subsea Robotics / Automation, Seabed Production Concepts, Seabed Excavation Methods, Underwater Repair Techniques, Flexible Riser Studies and Maintenance Cost Reductions.</p>
<p>After leaving BP in 1992, he continued working in the offshore oil industry through Azur Offshore Ltd, including activities in the assessment of Emerging and Novel Technologies, Technical and Economic Audits, Studies, Production Sharing Agreement Evaluations, Safety and Environmental issues. Clients have included Chevron UK, BP Exploration, British Gas, Technomare, Trident Consultants, Fina UK and Cameron France.</p>
<p>He is a regular University lecturer at Crandfield School of Industrial Sciences (UK) and is a course Group Project external examiner for Crandfield. He also lectures on offshore oil industry activities at ENSIETA (France), the Technical University of Delft (Holland) and the Northern Territories University in Darwin (Australia). He is an active member of the UK Society for Underwater Technology (SUT) and serves on their Subsea Engineering and Operations Committee.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Introduction to Exploration and Production for New Engineers and Non-Technical Professionals in Oil & Gas

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p><strong>Business Impact:</strong> The main aim is to provide insight and understanding of data analytics and machine learning principles through applications. Field data is used to explain data-analysis workflows. Using easy to follow solution scripts, the participants will assess and extract value from the data sets. Hands-on solution approach will give them confidence to try out applicable techniques on data from their field assets.</p>
<p>Data analysis means cleaning, inspecting, transforming, and modeling data with the goal of discovering new, useful information and supporting decision-making. In this hands-on 2-day training course, the participants learn some data analysis and data science techniques and workflows applied to petroleum production (specifically artificial lift) while reviewing code and practicing. The focus is on developing data-driven models while keeping our feet closer to the underlying oil and gas production principles.</p>
<p><strong>Unique Features:</strong></p>
<ul>
<li><strong><em>Eight business use cases</em></strong> covering their business impact, code walkthroughs for most all and solution approach.</li>
<li><strong><em>Industry data sets</em></strong> for participants to practice on and take home.</li>
<li>No software or complicated Python frameworks required.</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>After the completion of this training course, participants will be able to:</p>
<ul>
<li>Understand digital oil field transformation and its impact on business</li>
<li>Examine machine learning methods</li>
<li>Review workflows and code implementations</li>
<li>After completing the course, participants will have a set of tools and some pathways to model and analyze their data in the cloud, find trends, and develop data-driven models</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This training course is suitable and will greatly benefit the following specific groups:</p>
<ul>
<li>Artificial lift, production and facilities engineers and students to enhance their knowledge base, increase technology awareness, and improve the facility with different data analysis techniques applied on large data sets</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
<li>Advanced</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The course discusses several business use-cases that are amenable to data-driven workflows. For each use case, the instructor will show the solution using a data analysis technique with Python code deployed in the Google cloud. Trainees will solve a problem and tweak their solution.</span></p>
<p><em><span>Course Duration: 2 days in total (14 hours).</span></em></p>
<p><strong><span>Training Schedule</span></strong></p>
<p><span>0830 - Registration </span><span>0900 - Start of training </span><span>1030 - Morning Break </span><span>1045 - Training recommences </span><span>1230 - Lunch Break </span><span>1330 - Training recommences </span><span>1515 - Evening break </span><span>1530 - Training recommences </span><span>1700 - End of Training</span></p>
<p><span>The maximum number of participants allowed for this training course is 20.</span></p>
<p>This course is also available through our Virtual Instructor Led Training (VILT) format.</p>
<p><strong>Prerequisites:</strong></p>
<ul>
<li>Understanding of petroleum production concepts</li>
<li>Knowledge of Python is not a must but preferred to get the full benefit.</li>
<li>The training will use the Google Collaboratory environment available in Google-Cloud for hands-on exercises</li>
<li>Trainees will need to bring a computer with a Google Chrome browser and a Google email account (available for free)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has over 35 years' work-experience in multiphase flow, artificial lift, real-time production optimization and software development/management. His current work is focused on a variety of use cases like failure prediction, virtual flow rate determination, wellhead integrity surveillance, corrosion, equipment maintenance, DTS/DAS interpretation. He has worked for national oil companies, majors, independents, and service providers globally. He has multiple patents and has delivered a multitude of industry presentations. Twice selected as an SPE distinguished lecturer, he also volunteers on SPE committees. He holds a Bachelor's and Master's in chemical engineering from the Gujarat University and IIT-Kanpur, India; and a Ph.D. in Petroleum Engineering from the University of Tulsa, USA.</p>
<p><strong>Highlighted Work Experience: </strong></p>
<ul>
<li>At Weatherford, consulted with clients as well as directed teams on digital oilfield solutions including LOWIS - a solution that was underneath the production operations of Chevron and Occidental Petroleum across the globe.</li>
<li>Worked with and consulted on equipment's like field controllers, VSDs, downhole permanent gauges, multiphase flow meters, fibre optics-based measurements.</li>
<li>Shepherded an enterprise-class solution that is being deployed at a major oil and gas producer for production management including artificial lift optimization using real time data and deep-learning data analytics.</li>
<li>Developed a workshop on digital oilfield approaches for production engineers.</li>
</ul>
<p><strong>Patents:</strong></p>
<ul>
<li>Principal inventor: 'Smarter Slug Flow Conditioning and Control'</li>
<li>Co-inventor: 'Technique for Production Enhancement with Downhole Monitoring of Artificially Lifted Wells'</li>
<li>Co-inventor: 'Wellbore real-time monitoring and analysis of fracture contribution'</li>
</ul>
<p><strong>Worldwide Experience in Training / Seminar / Workshop Deliveries:</strong></p>
<ul>
<li>Besides delivering several SPE webinars, ALRDC and SPE trainings globally, he has taught artificial lift at Texas Tech, Missouri S&amp;T, Louisiana State, U of Southern California, and U of Houston.</li>
<li>He has conducted seminars, bespoke trainings / workshops globally for practicing professionals:
<ul>
<li><u>Companies:</u> Basra Oil Company, ConocoPhillips, Chevron, EcoPetrol, Equinor, KOC, ONGC, LukOil, PDO, PDVSA, PEMEX, Petronas, Repsol, , Saudi Aramco, Shell, Sonatrech, QP, Tatneft, YPF, and others.</li>
<li><u>Countries:</u> USA, Algeria, Argentina, Bahrain, Brazil, Canada, China, Croatia, Congo, Ghana, India, Indonesia, Iraq, Kazakhstan, Kenya, Kuwait, Libya, Malaysia, Oman, Mexico, Norway, Qatar, Romania, Russia, Serbia, Saudi Arabia, S Korea, Tanzania, Thailand, Tunisia, Turkmenistan, UAE, Ukraine, Uzbekistan, Venezuela.</li>
<li>Virtual training provided for PetroEdge, ALRDC, School of Mines, Repsol, UEP-Pakistan, and others since pandemic.</li>
</ul>
</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Data Analytics Workflows for Artificial Lift, Production and Facility Engineers

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p><span>This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control. With the growing importance of grid integration of renewables and the interest in smart grid technologies, it is more important than ever to understand the fundamentals that underpin electrical power systems.</span></p>
<p><span>This course provides a thorough understanding of all basic terminology and concepts of electrical systems, structure of a power system, transmission line parameters, insulators, high-voltage direct current transmission, substation and neutral grounding, distribution system, circuit breakers, relaying and protection, power system stability, economic operation of power systems, load frequency control, voltage and reactive power control, renewable energy sources, restructuring of electrical power systems, and smart grids.</span></p>
<p><span>This course is a MUST for practitioners, consultants, engineers of all disciplines, managers, technicians and all technical personnel who need to learn about electrical power systems.</span></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Basic Terminology and Concepts of Electrical Systems:</strong> Gain an understanding of the basic terminology and concepts of electrical systems and the structure of a power system</li>
<li><strong>Transmission Line Parameters:</strong> Learn in detail all the transmission line parameters including line resistance, line inductance, transposition of transmission lines, and capacitance of transmission lines</li>
<li><strong>Insulators:</strong> Understand thoroughly all the various types of insulators, pin type insulators, suspension type or disc insulators, strain insulators, and testing of insulators</li>
<li><strong>High-Voltage Direct Current Transmission:</strong> Determine the advantages and disadvantages of high voltage direct current transmission, and gain an understanding of all the features of high-voltage direct current transmission</li>
<li><strong>Substations and Neutral Grounding:</strong> Gain a detailed understanding of all substation equipment, factors governing the layout of substations, station transformers, elements to be earthed in a substation, power system earthing, earthing transformers, bus bar arrangements and gas-insulated substations</li>
<li><strong>Distribution System:</strong> Learn about the effects of voltage on the conductor volume, distributor fed from one end, distributors fed from both ends at the same voltage, distributors fed from both ends at different voltages, and alternating current distribution</li>
<li><strong>Circuit Breakers:</strong> Learn about the classification of circuit breakers, plain-break oil circuit breakers, air break circuit breaker, air blast circuit breakers, vacuum circuit breakers, SF6 circuit breakers, rating and testing of circuit breakers</li>
<li><strong>Relaying and Protection:</strong> Learn all the requirements of relaying, zones of protection, primary and backup protection, classification of relays, electromagnetic relays, induction relays, feeder protection, phase fault protection, reactance relay, static overcurrent relay, differential protection, transformer protection, Buchholz relays, alternator protection restricted earth fault protection, rotor earth fault protection, and negative-sequence protection</li>
<li><strong>Economic Operation of Power Systems:</strong> Gain an understanding of steam power plants, heat rate characteristics and characteristics of hydro plants</li>
<li><strong>Load Frequency Control:</strong> Learn about speed governing mechanism, speed governor, steady state speed regulations and adjustment of governor characteristics</li>
<li><strong>Voltage and Reactive Power Control:</strong> Gain an understanding of impedance and reactive power, system voltage and reactive power, voltage regulation and power transfer</li>
<li><strong>Renewable Energy Sources:</strong> Learn about solar power, wind power, geothermal energy, biomass and tidal power</li>
<li><strong>Restructuring of Electrical Power Systems:</strong> Gain an understanding of smart grids, smart grid components, smart grid benefits, and open smart grid protocol</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><strong>The VILT will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 x 10 minutes break per day</strong>, including time for lectures, discussion, quizzes and short classroom exercises.</p>
<p>Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end the course.</p>
<p>The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Introduction to Power Systems Manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Introduction to Power Systems

Kuala Lumpur

<section style="color: rgb(33, 37, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(33, 37, 41);"><h2 style="color: rgb(62, 57, 52); box-sizing: border-box;" fr-original-style=" color: rgb(62, 57, 52);">About this Training Course</h2><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This 5 full-day course will provide a comprehensive understanding of the various types of reciprocating, rotary, and centrifugal pumps and compressors including piston pumps, plunger pumps, rotary pumps, screw pumps, two- and three-lobe pumps, cam pumps, vane pumps, bellows-type metering pumps, diaphragm pumps, canned motor pumps, centrifugal pumps, as well as trunk piston compressors, sliding crosshead piston compressors, diaphragm compressors, rotary screw compressors, straight lobe compressors, sliding vane compressors, liquid ring compressors, centrifugal, and axial compressors. Bearings will also be covered thoroughly. This course will focus on maximizing the efficiency, reliability, and longevity of this equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This course is a MUST for anyone who is involved in the selection, applications, or maintenance of reciprocating, rotary, and centrifugal pumps or compressors because it covers how this equipment operates, the latest maintenance techniques, and provides guidelines and rules that ensure the successful operation of this equipment. In addition, it will cover in detail the basic design, operating characteristics, specification, selection criteria, advanced fault detection techniques, critical components and all preventive and predictive maintenance methods in order to increase reliability of the equipment and reduce the operation and maintenance cost.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This course will provide the following information for all reciprocating, rotary, and centrifugal pumps and compressors:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Basic Design</li><li fr-original-style="" style="box-sizing: border-box;">Specification</li><li fr-original-style="" style="box-sizing: border-box;">Selection Criteria</li><li fr-original-style="" style="box-sizing: border-box;">Sizing Calculations</li><li fr-original-style="" style="box-sizing: border-box;">Enclosures and Sealing Arrangements</li><li fr-original-style="" style="box-sizing: border-box;">Codes and Standards</li><li fr-original-style="" style="box-sizing: border-box;">Common Operational Problems</li><li fr-original-style="" style="box-sizing: border-box;">All Diagnostics, Troubleshooting, Testing, and Maintenance</li></ul></section><section style="color: rgb(33, 37, 41); box-sizing: border-box;" fr-original-style=" color: rgb(33, 37, 41);"><a data-toggle="collapse" href="https://petroedgeasia.net/training/compressors-pumps-selection-applications-operation-troubleshooting-and-maintenance-classroom-training-2/#collapseOne" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TRAINING OBJECTIVES</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Operation:</strong>&nbsp;Gain a thorough understanding of the operating characteristics of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Diagnostics and Inspectio</strong><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">n:</strong>&nbsp;Learn in detail all the diagnostic techniques and inspections required of critical components of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Testing:&nbsp;</strong>Understand thoroughly all the tests required for the various types of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Maintenance and Troubleshooting:</strong>&nbsp;Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Repair and Refurbishment:</strong>&nbsp;Gain a detailed understanding of the various methods used to repair and refurbish reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Efficiency, Reliability, and Longevity</strong>:&nbsp;Learn the various methods used to maximize the efficiency, reliability, and longevity of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Sizing:&nbsp;</strong>Gain a detailed understanding of all the calculations and sizing techniques used for reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Design Features:</strong>&nbsp;Understand all the design features that improve the efficiency and reliability of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Selection:&nbsp;</strong>Learn how to select reciprocating, rotary, and centrifugal pumps and compressors by using the performance characteristics and selection criteria that you will learn in this seminar</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Enclosures and Sealing Methods:</strong>&nbsp;Learn about the various types of enclosures and sealing arrangements used for reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Commissioning:</strong>&nbsp;Understand all the commissioning requirements for reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Codes and Standards:</strong>&nbsp;Learn all the codes and standards applicable for reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Causes and Modes of Failure:&nbsp;</strong>Understand the causes and modes of failure of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">System Design</strong><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">:</strong>&nbsp;Learn all the requirements for designing different types of reciprocating, rotary, and centrifugal pumping and compressing systems</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/compressors-pumps-selection-applications-operation-troubleshooting-and-maintenance-classroom-training-2/#collapseTwo" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TARGET AUDIENCE</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Engineers of all disciplines</li><li fr-original-style="" style="box-sizing: border-box;">Managers</li><li fr-original-style="" style="box-sizing: border-box;">Technicians</li><li fr-original-style="" style="box-sizing: border-box;">Maintenance personnel</li><li fr-original-style="" style="box-sizing: border-box;">Other technical individuals</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/compressors-pumps-selection-applications-operation-troubleshooting-and-maintenance-classroom-training-2/#collapsecl" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">COURSE LEVEL</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Intermediate</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/compressors-pumps-selection-applications-operation-troubleshooting-and-maintenance-classroom-training-2/#collapseThree" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TRAINING METHODS</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Each delegate will receive a copy of the following materials written by the instructor:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">&ldquo;POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE&rdquo; published by McGraw-Hill in 2012 (800 pages)</li><li fr-original-style="" style="box-sizing: border-box;">Practical Manual (200 pages)</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/compressors-pumps-selection-applications-operation-troubleshooting-and-maintenance-classroom-training-2/#collapseFive" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TRAINER</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as &ldquo;Excellent&rdquo; or &ldquo;Very Good&rdquo; by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li><li fr-original-style="" style="box-sizing: border-box;">Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li><li fr-original-style="" style="box-sizing: border-box;">Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li><li fr-original-style="" style="box-sizing: border-box;">Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li><li fr-original-style="" style="box-sizing: border-box;">Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Furthermore, he has received the following awards:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">The first &ldquo;Excellence in Teaching&rdquo; award offered by PowerEdge, Singapore, in December 2016</li><li fr-original-style="" style="box-sizing: border-box;">The first &ldquo;Excellence in Teaching&rdquo; award offered by the Professional Development Center at University of Toronto (May, 1996).</li><li fr-original-style="" style="box-sizing: border-box;">The &ldquo;Excellence in Teaching Award&rdquo; in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li><li fr-original-style="" style="box-sizing: border-box;">Awarded graduation &ldquo;With Distinction&rdquo; from Dalhousie University when completed Bachelor of Engineering degree (1983).</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Lastly, he was awarded his Bachelor of Engineering Degree &ldquo;with distinction&rdquo; from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/compressors-pumps-selection-applications-operation-troubleshooting-and-maintenance-classroom-training-2/#collapseCS" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">POST TRAINING COACHING SUPPORT (OPTIONAL)</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &ldquo;One to One&rdquo; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;"><a href="mailto:info@asiaedge.net?subject=Request%20for%20further%20information%20regarding%20post%20training%20coaching%20support" target="_blank" style="color: rgb(0, 123, 255); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 123, 255);">Request for further information post training support</a>&nbsp;and fees applicable</p></div></section>

Maintenance

Enhance your expertise in compressor and pump selection, operation, troubleshooting, and maintenance with EnergyEdge's comprehensive classroom training. Elevate your skills today!

Compressors & Pumps: Selection, Applications, Operation, Troubleshooting and Maintenance

Brighton

Southend on Sea

Rotherham

Manchester

Slough

Portsmouth

Bingley

Nottingham

Paisley

Birmingham

Luton

Northampton

Bedford

Liverpool 

Swansea

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (Foundation Degree Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M00 - Introduction:
Learning outcomes, Assumptions and Overview.
M01 - Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to
the advanced course.
M02 - Aspirated and Vacuated Systems:
Open systems (Syringe & Needle), closed systems (Vacutainer & Monovette), Alternative closed systems, Using Monovette - aspiration and evacuated techniques, monovette adapter systems.
M03 - Specialised and Advanced Phlebotomy Equipment:
The centrifuge - overview. Safe operation and use. Managing a centrifuge breakage or spillage.
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at
0 degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
M04 - Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC tests. Roles for phlebotomists performing POC Tests.
M05 - Neonates and Children:
Sample collection from new-born to pre-adult. A detailed overview of legal principles of law including child consent and child protection for phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedures including
microtainers, lancets and capillary tube collection. Detailed heel prick procedure. Paediatric finger prick collection. The life-threatening hazard of over-collecting. Communication techniques in differing age bands.
Consent and the law. Basic principles of lawful consent for neonates and paediatric patients. Child protection.
Detailed analysis of neonatal and paediatric blood collection including Guthrie card collection. Neonatal bottles - colours and tests. Paediatric blood gases collection.
Butterfly needles - when to use. Blood tests during pregnancy. Neonatal blood screening - nine conditions covered. Bilirubin in neonates.
M06 - Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin changes and venepuncture implications. A profile of common
geriatric blood tests. Age related problems. Procedural precautions.
M07 - Special Procedures:
Drawing blood from back of hand. Drawing blood from lower limb veins. Managing the unwilling or difficult patient. Managing the psychiatric patient. Managing the isolated patient. Non-routine blood tests. Managing the latex allergy patient (type 1 and type 4 reactions). Latex indicators. Sample handling - non-routine procedures. Drug trials and research projects.
M08 - Special Tests and Sample Handling Procedures:
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group - collection notes, analytic time, optimal collection time and notes for each group.
M09 - Advanced Phlebotomy Tasks:
Additional procedures. Maintaining POC equipment. Stock control and stock rotation. Quality control. Data entry. Product evaluation. Training and competency evaluation.
M10 - Alternative Environments:
A step-by-step look at non-clinical phlebotomy environments including private testing, DEFRA, forensic and police, cord blood collection, DNA analysis, veterinary services, overseas and volunteering.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM)
MORNING , AFTERNOON OR EVENING SESSION:

1 - Welcome, introductions and overview:
- Classroom - health & safety briefing, schedule overview.
- Virtual Classroom - audio/visual checks and registration. Unpacking and overview of your training kit.
2 - Syringe and Needle (open system): Correct use and applications.
3 - Monovette (open and closed systems):
Using the Monovette system in aspiration mode - correct use and applications.
Using the Monovette system in evacuated mode - correct use and applications.
4 - IR Vein Detector:
Demonstration of the IR vein detector for assisting in detection of difficult veins.
5 - Veins in back of hand:
Detecting suitable veins in the back of the hand.
6 - POC testing:
Point of Care Testing - use of glucose meter to demonstrate a typical POC test procedure. Correct use and overview of other POC test devices.
7 - Using lancets (finger collection)
We look at the correct use of lancets for POC testing and whole blood micro-collection.
8 - Using lancets (heel collection)
We look at the correct use of lancets for neonatal blood spot tests (Guthrie Test).
9 - Capillary collection
Using glass capillary tubes for micro-collection. Correct use and handling.
10 - Microtube collection
Correct use of BD Microtainers (and similar micro-collection bottles) - collection and handling.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6)

    FDSc (Foundation Degree Level) qualification

    Nationally Recognised certificate

    Dually accredited: Open College Network  and CPD

    Covers both aspirated and evacuated systems

    Covers specialised blood collection systems & methods

    Classroom or Virtual Classroom learning options

    Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep)

    Complete your training from beginner to advanced level

    This course either follows on from our Introduction to Phlebotomy Course  or can be combined with our introductory course as part of a course package (see below)

    Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.


Advanced Phlebotomy - Skills & Techniques (GPT005)

Key Facts:


COURSE 1: PERIPHERAL I.V. CANNULATION COURSE (GPT008)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.

 
Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)
Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.





Key Facts:


COURSE 2: VACCINATION / INJECTION COURSE (GPT601)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)


Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (FDSc Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)



SUITABLE FOR:
- MEDICAL / HEALTHCARE (trainees and professionals)
- AESTHETIC THERAPISTS (all levels)

 
This Vaccination / Injection Course is a nurse or paramedic-led half-day session covering all essential theory and practical skill-sets required to deliver effective Intramuscular, Intradermal and Subcutaneous injections / vaccinations.
 
PART 1 - THEORY (online)
Delegates will fully understand the theory and will be able to demonstrate they can identify the correct patient, gain consent and safely administer a vaccine or injection, conforming to WHO and Skills for Health recommended standards.
 
Itinerary:
M01 Course Overview and brief history
M02 Infection Protection Control
M03 Professionalism and Effective Communication
M04 Understanding injection procedures
M05 Why do we vaccinate?
M06 The immune system and how vaccines work. Vaccine types and composition.
M07 The National Vaccine Policy & Schedule
M08 Vaccine preventable diseases
M08A – Covid-19 Update
M09 Vaccines - understanding the reconstitution process
M10 Storage and Handling – understanding correct procedures and protocols
M11 Equipment – Syringes and Syringe Types, Needles and Needle Types, SDV (Single-Dose Vials), MDV (Multi-Dose Vials), Pre-Filled Syringes, Gloves and PPE.
M12 Vaccination sites, techniques and anatomical site selection
i) Intramuscular (IM) Injection
ii) Subcutaneous (SubCut) Injection
iii) Intradermal (ID) Injection
M13 Legal requirements, Consent and Standard Operating Procedures
M14 Adverse Reactions and Basic Life Support Guidance
M15 Record keeping & Documentation
 
PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING
PART 2 - CLASSROOM (am, pm or evening sessions)
3 - 4 hours skill-set development with practical demonstrations and hands-on experience performing Intramuscular, Intradermal and Subcutaneous Injections.
 


How do I attend?

EITHER -
CLASSROOM OPTION - Complete your theory training online at home or work, then attend one of our scheduled classroom locations, completing your Peripheral IV Cannulation Course and your Injection Course on the same day.
Our Peripheral IV Cannulation Course and Injection Course training kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available for you to add at time of booking. Training kits mirror the same equipment and supplies used in the classroom and both include detailed video instructions, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for your one full day to complete your cannulation and injection course training.

Our Virtual Classroom option includes two very comprehensive training kits - one for your cannulation course and one for your injection course. Kits are included at no charge (normally £79.95 and £39.95 respectively) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Additional Courses suitable for Aesthetic Therapists:
Our popular Introduction to Phlebotomy Course also trains you to perform venepuncture at Advanced Level. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Advanced Level.
If you already have phlebotomy skills (or decide to enroll on our phlebotomy training course) then you will be able to offer your clients Platelet-Rich Plasma (PRP) Treatments, also known as Vampire Facials. Our PRP (Vampire Facials) Course trains you in the harvesting, preparation and treatment of PRP for application to your clients as required. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Foundation Degree Level.

If you would like to "mix and match" your training dates and/or locations or would like to build your own package of courses then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are dually accredited and are Skills for Health & WHO compliant.

Medical Aesthetics

Platelet-rich plasma (PRP)

Intravenous Cannulation

Aesthetic Practitioner

Facial Aesthetics

THIS COURSE PACKAGE INCLUDES:
1: PERIPHERAL I.V. CANNULATION - IV THERAPIES COURSE (GPT008)
2: VACCINATION / INJECTION COURSE (GPT601)

Learn how to administer injectables and intravenous therapies ...

FAST-TRACK YOUR AESTHETICS TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% Multi-Course Discount

    Cover all stages from Level 1 through to Level 4 (FDSc)

    Cover your theory training online

    Complete your advanced practical training in 1 day

    Practical training in Classroom or Virtual Classroom

    Comprehensive Practise@Home training kits for VC

    Awards 2 accredited qualifications

    Dual Accreditations for all courses

    Covers all steps required to safely perform injectables

    Covers all steps required to safely perform IV therapies

    Practise IV on artificial arm with fake blood

    Practise injection techniques on realistic injection pads

    Learn beginner to advanced skills and techniques

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Aesthetic Therapy Training - Beginner to Advanced PACKAGE

Cardiff

Milton Keynes 

<div data-testid="richTextElement" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">ONLINE STUDY - In your own time (approx. 6 hours study time) +</span></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><br fr-original-style="" style="box-sizing: border-box;"></span></strong></span></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Awarding Body:</strong>&nbsp;Open College Network (OCN) Credit for Learning</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Award Level:</strong>&nbsp;Level 3 (Advanced Level) - Ireland Level 5</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">CPD Certified:</strong>&nbsp;Yes (CPD Accreditation)</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Minimum Age:&nbsp;</strong>18 (16 with parental consent)</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Entry requirements:&nbsp;</strong>None. (English Level 2 desirable)</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Training Locations:</strong>&nbsp;Study online + Classroom</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">&nbsp;</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(255, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(255, 0, 0);">OCN Accredited at UK Level 3 (Ireland Level 5)</span><br fr-original-style="" style="box-sizing: border-box;"></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">&nbsp;</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PART 1 - Theory:</strong>&nbsp;Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PART 2 - Skills and Practical Development:</strong><br fr-original-style="" style="box-sizing: border-box;">Safely and competently set up and maintain a Peripheral IV Infusion.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Attend a classroom location to complete your practical training.<br fr-original-style="" style="box-sizing: border-box;"></strong></p><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><span style="color: rgb(184, 49, 47); box-sizing: border-box;" fr-original-style="color: rgb(184, 49, 47);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;">Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></strong></span></p></div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Course Itinerary:</strong></div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></strong></div><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PART 1 - THEORY (ONLINE)</strong><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M1 - Peripheral IV Cannulation - Introduction:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Definitions - understanding terminology relating to PIVC.<br fr-original-style="" style="box-sizing: border-box;">IV Therapy and NMC guidelines.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M2 - Legal &amp; Professional Responsibilities:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Legal Obligations and Accountability. Criminal, Civil and<br fr-original-style="" style="box-sizing: border-box;">Contractual law in Healthcare. Vicarious Liability and your<br fr-original-style="" style="box-sizing: border-box;">Duty of Care.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M3 - Anatomy &amp; Physiology:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Sites appropriate to IV cannulation. Hand vs. arm.<br fr-original-style="" style="box-sizing: border-box;">Advantages and disadvantages of relevant veins.<br fr-original-style="" style="box-sizing: border-box;">An overview of Homeostasis and Fluid Balance.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M4 - Hygiene and Infection Prevention &amp; Control (IPC):</strong></span><br fr-original-style="" style="box-sizing: border-box;">Reducing healthcare-associated infections. Keeping Safe.<br fr-original-style="" style="box-sizing: border-box;">Bloodborne Pathogens and Work Practice Controls.<br fr-original-style="" style="box-sizing: border-box;">Standard Precautions. Waste Disposal. Needle-stick injuries.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M5 - Indications and Advantages:</strong></span><br fr-original-style="" style="box-sizing: border-box;">When to cannulate, infusion types and benefits over<br fr-original-style="" style="box-sizing: border-box;">alternative infusion routes. Continuous and intermittent infusion.<br fr-original-style="" style="box-sizing: border-box;">Prophylactic use before procedures and in unstable patients.<br fr-original-style="" style="box-sizing: border-box;">Contraindications.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M6 - Equipment:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Cannula types, sizes and colour coding. How to select<br fr-original-style="" style="box-sizing: border-box;">appropriate size. Equipment overview for total procedure.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M7 - Vein Choice for Cannulation:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Correct vein selection. Which veins to avoid.<br fr-original-style="" style="box-sizing: border-box;">How to manage an unsuccessful cannulation.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M8 - Procedures:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Full procedure for cannulation including correct documentation.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M8: Guide to Cannulation - revision</strong></span><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M8: Video - Recap with full procedure</strong></span><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M9 - Contraindications:</strong></span><br fr-original-style="" style="box-sizing: border-box;">When inappropriate to cannulate including patients with specific health conditions.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M10 - Complications:</strong></span><br fr-original-style="" style="box-sizing: border-box;">A detailed look at potential complications during and after<br fr-original-style="" style="box-sizing: border-box;">cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED</strong><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">BEFORE JOINING US FOR YOUR PRACTICAL TRAINING</strong><br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">PART 2 (CLASSROOM:</span><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong></strong><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">1 - Welcome, introductions and overview:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Classroom - registration and introductions.<br fr-original-style="" style="box-sizing: border-box;">Virtual Classroom - audio/visual checks and registration.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">2 - Legal &amp; Professional Responsibilities:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Overview and discussion.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">3 - Anatomy - key points (appropriate to PIVC):</strong></span><br fr-original-style="" style="box-sizing: border-box;">Arteries and veins. Selecting an approprate site. Sites to avoid and &ldquo;first choice&rdquo; sites.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">4 - Cannulae - selection and types:</strong></span><br fr-original-style="" style="box-sizing: border-box;">A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">5 - Complications:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Complications of pVAD insertion including examples of<br fr-original-style="" style="box-sizing: border-box;">infiltration, haematoma, extravasation and transfixation.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">6 - VIP Score:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Understanding and using the Visual Infusion Phlebitis score.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">7 - Equipment - overview:</strong></span><br fr-original-style="" style="box-sizing: border-box;">We take a look at all essential equipment required for PIVC.<br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">8 - PRACTICAL SESSIONS:</strong><br fr-original-style="" style="box-sizing: border-box;">Multiple practical sessions throughout the session.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">9 - Fluids:</strong></span><br fr-original-style="" style="box-sizing: border-box;">The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann&rsquo;s solution, Colloids (and risks), blood products.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">10 - Infusion Rates:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Calculating infusion rates and drops per minute.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;">This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.</em></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">&nbsp;</p><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)</strong></em></p></div></div><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p>

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Aesthetics

Medicine & Nursing

Venepuncture & Cannulation

Learn how to cannulate ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced) - Ireland Level 5

    CPD Accredited - The CPD Certification Service

    Classroom or Virtual Classroom options

    Covers all steps for cannulating in arm or hand

    Practise on artificial arms and fake blood!

    Essential qualification for all IV therapies

    Phlebotomy training desirable but not essential

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Peripheral I.V. Cannulation Course (GPT008)

<div style="color: rgb(36, 39, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(36, 39, 41);">The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.</div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);">Delegates successfully completing the e-learning will:<br fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have an awareness of how to correctly identify and select the appropriate form of personal<br fr-original-style="" style="box-sizing: border-box;">protection against falls from MEWPs.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness only of how to check, use, maintain and store a harness and<br fr-original-style="" style="box-sizing: border-box;">lanyard with manufacturer&rsquo;s instructions.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.</li></ul></div>

Kingfisher Access

The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.

Delegates successfully completing the e-learning will:
Have an awareness of how to correctly identify and select the appropriate form of personal
protection against falls from MEWPs.
Have a theoretical awareness only of how to check, use, maintain and store a harness and
lanyard with manufacturer’s instructions.
Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.

IPAF - Harness Awareness 

<div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><h2 fr-original-style="" style="box-sizing: border-box;">INTRAMUSCULAR, INTRADERMAL &amp; SUBCUTANEOUS INJECTION COURSE (GPT601)<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">CLASSROOM or VIRTUAL CLASSROOM (with online theory)</span></h2></div><section fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-testid="columns" fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-mesh-id="comp-kl8214n52inlineContent" data-testid="inline-content" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214n52inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">Learn how to administer vaccines or injections ...&nbsp;</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Nationally Recognised Qualification</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes IM, ID and Sub-Cut Injection methods</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OCN Accredited - Level 4 (Foundation Degree - FDSc)</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Covers all steps to safely perform a vaccination</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Use same techniques and skills for aesthetic therapies</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes B12, Vitamin C and other treatments</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Essential qualification for all injections</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Basic understanding of English language required</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OPEN TO ALL APPLICANTS</p></li></ul><div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">About this course</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">Learning Outcomes</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">After the course</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">PART 1 - Theory: complete online at<br fr-original-style="" style="box-sizing: border-box;">home or work and download a certificate of completion</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Injections - Aesthetics - B12, Vit C etc.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">78 UK &amp; Eire training locations</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OCN Accredited at Level 4 (FDSc)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Medical training standards throughout</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Skills for Health &amp; WHO compliant</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" id="isPasted" fr-original-style="color:#0D73B7;">Learning Outcomes</span></p><div data-mesh-id="comp-kl8214o43inlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214o43inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Train up to point of first vaccination or injection&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">All theory and practical skills required to perform a safe procedure</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Covers all essential theory and skill-set development to meet medical standards</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understand the procedures used to set up &nbsp;a manage and administer a vaccine</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Post-injection management and how to avoid critical complications</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Correct client care and aftercare</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes legal, consent and documentation</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" id="isPasted" fr-original-style="color:#0D73B7;">After the course</span></p><div data-mesh-id="comp-kl8214oainlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214oainlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Safely and competently administer a vaccine or drug treatment (ie. B12)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Correct client management before, during injection and safe after-care</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understanding equipment types and appropriate choices</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understand vaccine management control</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Appreciate legal and professional responsibilities</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Offer injection therapies to clients - vitamin supplements</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Administer in hospitals, GP Surgeries and Outreach Centres</p></div></div></div></div></div></div></div></div></div></div></div></section>

INTRAMUSCULAR, INTRADERMAL & SUBCUTANEOUS INJECTION COURSE (GPT601)
CLASSROOM or VIRTUAL CLASSROOM (with online theory)
Learn how to administer vaccines or injections ... 
Nationally Recognised Qualification
Includes IM, ID and Sub-Cut Injection methods
OCN Accredited - Level 4 (Foundation Degree - FDSc)
Covers all steps to safely perform a vaccination
Use same techniques and skills for aesthetic therapies
Includes B12, Vitamin C and other treatments
Essential qualification for all injections
Basic understanding of English language required
OPEN TO ALL APPLICANTS
About this course
Learning Outcomes
After the course
PART 1 - Theory: complete online at
home or work and download a certificate of completion
PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom
Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines
Injections - Aesthetics - B12, Vit C etc.
78 UK & Eire training locations
OCN Accredited at Level 4 (FDSc)
Medical training standards throughout
Skills for Health & WHO compliant
Learning Outcomes
Train up to point of first vaccination or injection 
All theory and practical skills required to perform a safe procedure
Covers all essential theory and skill-set development to meet medical standards
Understand the procedures used to set up a manage and administer a vaccine
Post-injection management and how to avoid critical complications
Correct client care and aftercare
Includes legal, consent and documentation
After the course
Safely and competently administer a vaccine or drug treatment (ie. B12)
Correct client management before, during injection and safe after-care
Understanding equipment types and appropriate choices
Understand vaccine management control
Appreciate legal and professional responsibilities
Offer injection therapies to clients - vitamin supplements
Administer in hospitals, GP Surgeries and Outreach Centres

Immunisation & Vaccination

Immunisation

Injection

Vaccination

Vaccinator

Learn how to administer vaccines or injections ...

    Nationally Recognised Qualification

    Includes IM, ID and Sub-Cut Injection methods

    OCN Accredited - Level 4 (Foundation Degree - FDSc)

    Covers all steps to safely perform a vaccination

    Use same techniques and skills for aesthetic therapies

    Includes B12, Vitamin C and other treatments

    Essential qualification for all injections

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Vaccination / Injection Course (GPT601)

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>The primary audience for this course is any IT, facilities or data centre professional, who are involved in the design/build, renovation or relocation of a mission-critical data centre.</p>Overview<p>This 5-day course is designed to prepare participants to analyse a given business case and perform technical evaluation for a project plan and a set of designs for the implementation of a mission critical data centre.<br />The course also engages participants in product evaluations and demonstrates how to select equipment and develop equipment test scripts (IET) and integrated performance and validation testing (IPVT). CDCEÂ© builds upon knowledge gained in CDCP and CDCS courses. Participants who pass the exam will join the industry's elite data centre project design experts.<br />CDCEÂ© is the highest level training in the EPI Design and Build training track under the EPI Data Centre Training Framework. Participants must hold a valid CDCS certificate in order to be able to register for the CDCE class.</p><p>CDCEÂ© is the premier certification for data centre professionals in the data centre design/build and related fields.</p></div><div id="course-pills-2"><h4>Data Centre Life Cycle</h4><ul><li>Data centre lifecycle stages and phases<br />Exercise: Stage/Phase/Milestone/Document mapping</li></ul><h4>Design Preparation</h4><ul><li>Creation of a SON ? Statement Of Need<br />Technology review<br />Conceptual sizing<br />How to calculate for computer room space<br />How to calculate facility space<br />How to calculate incoming power<br />Exercise: Conceptual sizing building and power<br />Analysing capacity of existing facility<br />Analysing investment options<br />Site selection<br />Permits and approvals<br />Exercise: Site selection<br />Conceptual design<br />Budget and project timeline<br />Business case preparation<br />Project delivery structure<br />Project management options<br />Project manager and team</li></ul><h4>Design Planning</h4><ul><li>OSRA?Operational Systems Requirement Analysis<br />TFRA?Technical Facilities Requirement Analysis<br />Operations and maintenance review<br />RFP?Request For Proposal process<br />Vendor selection</li></ul><h4>Design Development</h4><ul><li>Project planning<br />Design development<br />PDR ? Preliminary Design Review<br />Equipment selection<br />FDR/V ? Final Design Review/Validation<br />Exercise: Full design validation of power, cooling, floor plans, fire suppression<br />Design freeze and LLTI<br />Creation of construction documents<br />BOM/BOQ ? Bill Of Material/Bill Of Quantity<br />Exercise: Equipment selection</li></ul><h4>Acquire</h4><ul><li>Requirements of purchase orders<br />Shipping terms<br />FWT/FAT ? Factory Witness Test/Factory Acceptance Test<br />Sequencing<br />Incoming goods inspection and handling<br />Asset management</li></ul><h4>Construct</h4><ul><li>Temporary essential services<br />Erection of the building<br />Permanent essential services<br />Building inspection<br />Snag list<br />COF?Certificate Of Fitness</li></ul><h4>Fit-Out</h4><ul><li>Fit-Out<br />Builders cleaning<br />As-Built Drawings</li></ul><h4>Test &amp; Commissioning</h4><ul><li>IET?Individual Equipment Test<br />IPVT/IST?Integrated Performance Verification Test/Integrated Systems Test<br />Common mistakes with IET/IPVT<br />Deep cleaning<br />Exercise: IET/IPVT scripting</li></ul><h4>Hand-Over</h4><ul><li>Facility hand-over requirements and documents<br />PCC?Practical Completion Certificate<br />DLP?Defect Liability Period<br />Defect Management<br />ICT Systems Installation<br />ICT Systems Testing<br />Hand-Over/DLP Expiry<br />FCC?Final Completion Certificate</li></ul><h4>Retirement</h4><ul><li>Reasons and definitions of retirement<br />Building the business case and project plan<br />Sequencing<br />Transfer of site<br />Demolishing of site<br />Legal matters<br />FCC?Final Completion Certificate</li></ul><h4>Exam: Certified Data Centre Expert (CDCEÂ©)</h4><ul><li>The CDCEÂ© exam is in two parts: Part A is a 90-minute closed book exam, with 60 multiple-choice questions. For Part A, the candidate requires a minimum of 45 correct answers to pass the exam. Part B is a 90-minute closed book exam, with 25 open questions. For Part B the candidate needs to obtain a minimum of 75% to pass.</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Data Centre Expert (CDCE) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Data Centre Expert (CDCE) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Nexus Human

Certified in Cybersecurity (CC)

IT Certifications

Construction Design & Management (CDM)

Cisco Certified Internetwork Expert (CCIE)

Certified in Data Protection (CDP)

Certified Cyber Professional (CCP)

Certified Data Centre Expert (CDCE)

<p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(var(--color_25));">This official BRCGS course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of auditors auditing against Global Food Safety Initiative (GFSI) recognised certification programmes.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors with audit against the Standard. &nbsp;Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days&#39; duration.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the <a href="https://www.brcgs.com/store/" target="_blank" rel="noreferrer noopener" style="color: inherit; -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Store</a>, in addition to the pre-course materials provided.&nbsp;</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course you will be assessed with an exam. Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.</p><p style="color: rgb(77, 77, 79); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(77, 77, 79);"><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">This course is part of the</span><a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">.</span></p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course participants will be able to:&nbsp;</p><ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Explain the steps to managing an audit programme</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe auditing fundamentals and techniques</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe the scope of companies and products covered by the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Utilise and explain resource tools available for compliance and beneficial support from BRCGS</p></li></ul>

This official BRCGS course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of auditors auditing against Global Food Safety Initiative (GFSI) recognised certification programmes.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors with audit against the Standard. Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days' duration.
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided. 
At the end of the course you will be assessed with an exam. Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Explain the steps to managing an audit programme
Describe auditing fundamentals and techniques
Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity
Describe the scope of companies and products covered by the Standard
Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit
Utilise and explain resource tools available for compliance and beneficial support from BRCGS

Ask Sonia Limited

Food Safety

HACCP

Official BRCGS Food Safety Issue 9 Lead Auditor training course. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner & Virtual Trainer.
Exam and Certificate fee included in the price.

BRCGS Food Safety Issue 9 - Lead Auditor (5 Days)

<p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(var(--color_25));">This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard. It is designed to equip delegates with the knowledge of how to successfully implement the requirements of the Standard on site. Participants will discuss activities which develop a culture to maintain compliance and learn what to expect during the process of certification, including actions needed prior to, during and after the audit.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how sites will implement the Standard.&nbsp;</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the <a href="https://www.brcgs.com/store/" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Store</a>, in addition to the pre-course materials provided. It is advised participants must have working knowledge of HACCP.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course, participants will be assessed with an exam.&nbsp;</p><p style="color: rgb(77, 77, 79); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(77, 77, 79);"><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">This course is part of the</span><a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">.</span></p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course participants will be able to:&nbsp;</p><ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Explain what is required to comply with the requirements of the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe the scope of companies and products covered by the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe what to expect from your BRCGS audit&nbsp;</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Prepare for an audit to the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Apply resource tools available for compliance and support from BRCGS</p><br fr-original-style="" style="box-sizing: border-box;"></li></ul>

This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard. It is designed to equip delegates with the knowledge of how to successfully implement the requirements of the Standard on site. Participants will discuss activities which develop a culture to maintain compliance and learn what to expect during the process of certification, including actions needed prior to, during and after the audit.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how sites will implement the Standard. 
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided. It is advised participants must have working knowledge of HACCP.
At the end of the course, participants will be assessed with an exam. 
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Explain what is required to comply with the requirements of the Standard
Describe the scope of companies and products covered by the Standard
Describe what to expect from your BRCGS audit
Prepare for an audit to the Standard
Apply resource tools available for compliance and support from BRCGS

Official BRCGS Food Safety Issue 9 course. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner.
Exam and Certificate fee included in the price.

BRCGS Food Safety Issue 9 - For Sites (2 Days)

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(35, 35, 51);">This course is taught using a set of principles and methodologies developed by us to give participants a system they can always refer to any time they get stuck trying to interpret financial information.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">We have developed a 4-box model for teaching accounting which makes the process of breaking down any transaction natural for the nonaccountant. The system works without the need to learn any double-entry accounting, participants apply the system and instinctively know what to do.&nbsp;</span><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">This is followed up with another 4-box model we developed to completely break down financial analysis and ratios into the most fundamental metrics required of every role in an organization. &nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">Our approach is to teach financial analysis by making each participant aware of how their role and actions directly impact the company&#39;s bottom line.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">Participants will also be able to interpret the financial statement in a natural way using a third model (the 5 Box Balance Sheet) to analyze business performance effectively.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">This instructor-led course includes:&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;2 weeks of self-paced essential learning content that you are to complete before the instructor-led live virtual sessions begin.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;4 instructor-led virtual sessions of 2 hours each. Each Session will have a 15-minute break.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;Intersession Assignments that you are expected to complete and discuss in your preassigned groups during the session.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;1 Capstone Project&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; Lifetime access to our LMS where you will have free access to the trainer, other participants, and resources including knowledge videos.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;Access to our community of life-long learners.&nbsp;</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&bull; &nbsp; &nbsp;Downloadable Certificate you can link to your LinkedIn Page</strong>&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(35, 35, 51); box-sizing: border-box;" fr-original-style="color: rgb(35, 35, 51);">We look forward to seeing you in Class!!!</span></p>

dbrownconsulting

Financial Intelligence

Finance For Non Finance Managers

Finance Fundamentals

Elevate your role as a non-finance manager by learning to interpret financial information and analysis and learn how your actions directly impact the company's bottom line. 

580 Learning courses in Cardiff

Wind Power Generation: Advantages, Design, Site Selection, Equipment Selection, Operation and Maintenance, On-Shore and Off-Shore Wind Farms, Economics, Rate of Return, and Cost of Electricity from Wind Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Biofuels and Alternative Fuel Sources

By EnergyEdge - Training for a Sustainable Energy Future

ITIL 4 Strategist: Direct, Plan and Improve: In-House Training

By IIL Europe Ltd

Power BI® - Business Data Analytics

By EnergyEdge - Training for a Sustainable Energy Future

Gas Conditioning and Processing

By EnergyEdge - Training for a Sustainable Energy Future

LPG Production, Storage, Transfer & Safety

By EnergyEdge - Training for a Sustainable Energy Future

Introduction to Exploration and Production for New Engineers and Non-Technical Professionals in Oil & Gas

By EnergyEdge - Training for a Sustainable Energy Future

Data Analytics Workflows for Artificial Lift, Production and Facility Engineers

By EnergyEdge - Training for a Sustainable Energy Future

Introduction to Power Systems

By EnergyEdge - Training for a Sustainable Energy Future

Compressors & Pumps: Selection, Applications, Operation, Troubleshooting and Maintenance

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location