693 Design courses in Adwick-le-Street

SSSTS The CITB SSSTS course is an accredited Site Supervisors Safety Training Scheme for the construction site supervisor, these are generally referred to as SSSTS training courses. The supervisors safety training scheme is now a requirement set out by the major contractors group for all supervisors who will be working on their sites. Construction skills and health and safety need to go hand in hand and made a priority to encourage improved work skills and reduced accidents and injuries. ON THE 2 DAY SSSTS TRAINING COURSE THE MAIN FOCUS WILL BE ON: * THE IMPORTANCE OF RISK ASSESSMENTS IN THE CONSTRUCTION INDUSTRY * THERE IS A FOCUS ON HOW TO IMPLEMENT CONTROL MEASURES ON SITE AND * HOW TO USE COMMUNICATION TO ENSURE THE SITE REMAINS SAFE FOR EVERYONE * MONITORING THE CONTROL MEASURES AND WORK ACTIVITIES * ENSURING THAT THE WORK IS CARRIED OUT CORRECTLY AND SAFELY Delegates attending CITB SSSTS courses and who successfully complete will receive a SSSTS certificate to show that they are able to help supervise in the construction industry and have understanding when it comes to health and safety in the work place. During the course the main topics of the syllabus are: * THE HEALTH AND SAFETY ACTS, REGULATIONS * APPROVED CODES OF PRACTICE AND GUIDANCE NOTES * THE HEALTH AND SAFETY LEGAL SYSTEM * CAUSES, TYPES AND THE NUMBERS OF CONSTRUCTION ACCIDENTS * RISK ASSESSMENTS IN ALL MANNER OF CONSTRUCTION CIRCUMSTANCES THE CONCISE SSSTS COURSES WILL PROVIDE YOU WITH THE SKILLS TO: * IDENTIFY PROBLEM AREAS FOUND IN THE CONSTRUCTION INDUSTRY * UNDERSTAND AND APPRECIATE PROACTIVE AND REACTIVE MONITORING * PERFORM RISK ASSESSMENTS AND RECOGNISE THE IMPORTANCE OF METHOD STATEMENTS * HAVE AN UNDERSTANDING OF THE WAY THE HEALTH AND SAFETY LAWS ARE STRUCTURED * LEARN SKILLS NEEDED TO PERFORM ON SITE INDUCTIONS, METHOD BRIEFS AND TOOLBOX TALKS CITB SSSTS Courses at a Glance The SSSTS training course is designed for first line mangers looking to continue or take on a supervisory role within the construction industry. The course takes place over two days and will teach health and safety skills needed to maintain a safe site. A thirty minute multiple choice examination will follow the training. Upon successful completion of the SSSTS training the candidate will be awarded with the CITB Site Supervisory Safety Training Certificate. FURTHER DEVELOPMENT Successful candidates can go on to complete the 5 day site managers safety training scheme SMSTS course designed for site managers and supervisors.

The Site Safety Plus SMSTS course was introduced on 1 April 2002 as part of the Site Safety Plus CITB Site Management Safety Training Scheme. All Site Management Safety Training Scheme (SMSTS) certificates issued after 1st January 2001 are valid for a five year period from the date of issue. The two day refresher course will enable current SMSTS certificate holders to renew their qualification, however this course can only be attended by current and valid CITB SMSTS certificate holders. The CITB SMSTS Refresher certificate training course is designed to ensure that personnel maintain and up-date their current health and safety knowledge. The course covers changes to legislation, approved codes of practice and best working practice within the industry. Individuals wishing to renew their SMSTS training certificate must provide a copy of the original five-day course certificate. Details of the course venue and the date of the course should also be provided if known. Only those individuals who have passed the five day course and provided evidence of this will be eligible to take the two day refresher course. OBJECTIVES OF SMSTS REFRESHER COURSES * APPRECIATE RECENT DEVELOPMENTS IN CONSTRUCTION LEGISLATION ACCIDENT CAUSES * COSTS AND REASONS FOR PREVENTION * UNDERSTAND THE LEGAL SYSTEM * RELEVANT LEGISLATION * APPROVED CODES OF PRACTICE * GUIDANCE NOTES * CODES OF PRACTICE AND CASE LAW * CONDUCT RISK ASSESSMENTS * MONITOR HEALTH AND SAFETY PERFORMANCE * UNDERSTAND BEST PRACTICE IN THE MANAGEMENT OF SUB-CONTRACTORS * DISSEMINATE INFORMATION TO OPERATIVES AND SUB-CONTRACTORS COURSE DURATION: 2 DAYS SMSTS REFRESHER TRAINING COURSE ASSESSMENT Assessment is determined by reaching a minimum level of achievement against four criteria: * FULL ATTENDANCE OF ALL TRAINING COURSE SESSIONS * PERFORMANCE IN EACH OF THE FOUR CORE EXERCISES * AN OVERALL REVIEW BY THE COURSE TUTOR * A PASS MARK IN THE 25 QUESTION MULTI-CHOICE PAPER Successful candidates will be awarded the Site Safety Plus CITB Construction Site Management Safety Training Certificate (SMSTS). This certificate will remain valid for 5 years.

OVERVIEW -------------------------------------------------------------------------------- This course will give you a whole tour of how to enhance your skills as a UI/UX Design using Adobe. It is very important to master the basics of web and visual design because that is important for UI design eg designing buttons, typography, drop shadow etc. With having a good foundation in visual and web design become an essential key to become a skilled UI/UX Designer.

OVERVIEW -------------------------------------------------------------------------------- In this competitive era no matter how much hard work and solid efforts are contributed still, too many projects end up creating unneeded and unsellable products. There is a significant risk that the outcome of the project may not be relevant to the client/user requirements or become outdated when needs change. Here is where Design Thinking and Agile Management play their role. The combination of Agile and Design Thinking should be used in order to achieve impactful outcomes. Agile and design thinking together works well and gives an effective approach to product development, one that results in efficient resolutions to significant problems. In this course, you'll learn how to define and determine what's important to a user primary in the process, to frontload value, by directing your team on testable narratives about the user and generating an effectively shared perspective. For more dates and Venue, Please email sales@gbacorporate.co.uk

Face to face One to one.

Learn to use 3D printing software to design and create your own pendants, earrings, rings and bracelets. The course is on a one-to-one basis. If you want to be in the jewellery trade as a designer and seller of modern jewellery or you simply want to create designs for yourself and your family then you should be learning how to create your own designs using apps such as Fluid Designer for 3D Printing.

NETWORK DESIGN TRAINING COURSE DESCRIPTION This course provides you with the knowledge needed to perform the design of a network infrastructure that supports desired network solutions to achieve effective performance, scalability, and availability. We recognise that the role of design does not normally require hands on skills but hands on sessions are used to reinforce the theory not to teach configuration or troubleshooting. WHAT WILL YOU LEARN * Create HA enterprise network designs. * Develop optimum Layer 3 designs. * Design effective modern WAN and data center networks. * Develop effective migration approaches to IPv6. * Create effective network security designs. NETWORK DESIGN TRAINING COURSE DETAILS * Who will benefit: Anyone involved with network design. * Prerequisites: TCP/IP Foundation for engineers * Duration 5 days NETWORK DESIGN TRAINING COURSE CONTENTS PART I RELIABLE, RESILIENT ENTERPRISE L2/3 NETWORK DESIGN Optimal Enterprise Campus Design: Enterprise campus design principles, hierarchy, modularity, flexibility, resiliency. EIGRP design: EIGRP Design, Should you use EIGRP? OSPF design: OSPF scalability designs, OSPF area design, OSPF Full-Mesh Design, OSPF Hub-and-Spoke Design, OSPF convergence design and optimization techniques. IS-IS Design: The protocol, IS-IS hierarchical architecture, IS-IS vs OSPF, IS-IS Deep Dive, IS-IS Design Considerations. BGP design: BGP overview, Designing Scalable iBGP Networks, BGP Route Reflector Design, Enhancing the Design of BGP Policies with BGP Communities, Case Study: Designing Enterprise wide BGP Policies Using BGP Communities, BGP Load-Sharing Design. PART II ENTERPRISE IPV6 DESIGN CONSIDERATIONS IPv6 Design Considerations in the Enterprise: IPv6 Deployment and Design Considerations, Considerations for Migration to IPv6 Design, IPv6 Transition Mechanisms, Final Thoughts on IPv6 Transition Mechanisms. Challenges of the Transition to IPv6: IPv6 Services, Link Layer Security Considerations. PART III MODERN ENTERPRISE WIDE-AREA NETWORKS DESIGN Service Provider-Managed VPNs: Choosing Your WAN Connection, Layer 3 MPLS VPNs, Case Study: MPLS VPN Routing Propagation, Layer 2 MPLS VPN Services. Enterprise-Managed WANs: Enterprise-Managed VPNs, GRE, Multipoint GRE, Point-to-Point and Multipoint GRE, IPsec, IPsec and dynamic VTI, DMVPN, Case Study: EIGRP DMVPN, DMVPN and Redundancy, Case Study: MPLS/VPN over GRE/DMVPN, SSL VPN. Enterprise WAN Resiliency Design: WAN Remote-Site Overview, MPLS L3 WAN Design Models, Common L2 WAN Design Models, Common VPN WAN Design Models, 3G/4G VPN Design Models, Remote Site Using Local Internet, Remote-Site LAN, Case Study: Redundancy and Connectivity, NGWAN, SDWAN, and IWAN Solution Overview, IWAN Design Overview, Enterprise WAN and Access Management. PART IV ENTERPRISE DATA CENTER DESIGNS Multitier Data Center Designs: Case Study: Small Data Centers (Connecting Servers to an Enterprise LAN), Case Study: Two-Tier Data Center Network Architecture, Case Study: Three-Tier Data Center Network Architecture. Trends and Techniques to Design Modern Data Centers: The Need for a New Network Architecture, Limitations of Current Networking Technology, Modern Data Center Design Techniques and Architectures, Multitenant Data Center. SDN: SDN characteristics, How SDN addresses current Networking Limitations, SDN Architecture Components, SDN Network Virtualization overlays. Data Center Connections: Data Center Traffic Flows, The Need for DCI, IP Address Mobility, Case Study: Dark Fiber DCI, Pseudowire DCI. PART V DESIGN QOS FOR OPTIMIZED USER EXPERIENCE QoS Overview: QoS Overview, IntServ versus DiffServ, Classification and Marking, Policers and Shapers, Policing Tools: Single-Rate Three-Color Marker, Policing Tools: TwoRate Three-Color Marker, Queuing Tools, Dropping Tools. QoS design principles and best practices: QoS overview, classification and marking design principles, policing and remarking design principles, queuing design principles, dropping design principles, Per-Hop behavior queue design principles, RFC 4594 QoS Recommendation, QoS Strategy Models. Campus QoS, WAN QoS, Data Center QoS. MPLS VPN QoS Design: The Need for QoS in MPLS VPN, Layer 2 Private WAN QoS Administration, Fully Meshed MPLS VPN QoS Administration, MPLS DiffServ Tunneling Modes, Sample MPLS VPN QoS Roles. IPsec VPN QoS Design: The Need for QoS in IPsec VPN, VPN Use Cases and Their QoS Models, IPsec Refresher, Encryption and Classification: Order of Operations, MTU Considerations, DMVPN QoS Considerations. PART VI IP MULTICAST DESIGN Enterprise IP Multicast Design: How Does IP Multicast Work? Multicast Protocols, Multicast Forwarding and RPF Check, Multicast Protocol Basics, PIM-SM Overview, Multicast Routing Table, Basic SSM Concepts, Bidirectional PIM. RP discovery, Anycast RP Features, MSDP. PART VII DESIGNING OPTIMUM ENTERPRISE NETWORK SECURITY Designing Security Services and Infrastructure Protection Network Security Zoning, Designing Infrastructure Protection. Designing firewall & IPS solutions: Firewall architectures, virtualized firewalls. Case Study: Application Tier separation, Case Study: Firewalls in a Data Center, Case Study: Firewall High Availability, IPS Architectures, Case Study: Secure Campus Edge Design (Internet and Extranet Connectivity). IP Multicast Security: Multicast Security Challenges, Multicast Network Security Considerations. Designing Network Access Control Solutions: IEEE 802.1X, EAP, 802.1X supplicants, 802.1X phased deployment, Case Study: Authorization Options. PART VIII DESIGN SCENARIOS Design Case Studies: 1: Enterprise Connectivity, 2: Enterprise BGP with Internet Connectivity, 3: IPv6, 4: Data Center Connectivity, 5: Resilient Enterprise WAN, 6: Secure Enterprise Network, 7: QoS in the Enterprise Network.

ABOUT THIS TRAINING COURSE This 5 full-day course is aimed at engineers and supervisors who already have a basic understanding of well construction methods but who would benefit from a more detailed knowledge of completion design. The course will concentrate on the important aspects of completion design and what makes a safe and efficient well. A common thread of practical examples will be used throughout the course in the form of a case study or 'red-thread' exercise. The case study is based around data all taken from a single field where those attending will work through all the basic issues of a completion design. The exercises associated with the case study is performed in the student's own time after each of the formal sessions. However, at the start of the next day, the case study is reviewed and discussed. The whole case study will continue through all sessions, with each element being reviewed at the start of the next session. There is no 'right' answer to the exercise - producing interesting discussions! The purpose of the course is not to go over specific equipment in detail. Teaching methods include presentations, videos, and animations and the case study. The course will cover: * Types and configurations of completions * The completion design process * Inflow performance, skin and formation damage * Perforating; selection, deployment and interface with rest of completion * Stimulation and impact on completion and flow performance with coverage of modern horizontal multifrac tools * Open hole, non-sand control completions including open hole packers and horizontal well clean up * Sand control; when do you need it, basic types and selection guidelines. Includes standalone screens, ICDs, various gravel packing techniques, frac packs and expandable screens * Tubing sizing, flow estimation and liquid loading * Artificial lift; types and selection criteria, interface with drilling, reservoir and facilities. Design of gas lift and ESPs included * Production chemistry impacts on completion, prevention and removal (scales, wax, asphaltene, hydrates, and souring) * Metallurgy, corrosion, and erosion; metal types and selection of * Elastomers and plastics; types and selection of * Tubing stress analysis; picking the grade and weight of tubing, plus selection criteria for packers and expansion devices. Interface between tubing stress analysis and casing design * Completion equipment; basic types of equipment, reliability and selection criteria for each (tree, safety valve, mandrel, packers, expansion devices etc) * Completion installation; importance of wellbore clean-out, function and types of brines, pointers for efficient completion installation * Non-conventional wells; types and when / where to use them (multilaterals, smart (intelligent) wells and also SAGD, CO2 sequestration, CBM, etc) Training Objectives By the end of this course, the participants should be able to: * Have a good understanding of the completion design process and what makes a good completion design * Understand the importance of the installation process (completion running) in the design process * Have an appreciation of new and developing completion techniques (intelligent wells) Target Audience This course will benefit engineers and field-based personnel such as completion supervisors and production engineers. It is also suitable for completion vendors, specialists such as chemists and subsurface personnel including geologists, reservoir engineers and petrophysicists. Trainer Your expert course leader has 30 years of oil and gas industry experience. A first class degree in geophysics and a master degree in Petroleum Engineering was a prelude to seven years with BP as a petroleum engineer. He left BP and following a short spell in Camco, jointly founded ICE Energy. After six years of completions and petroleum engineering consultancy and training, ICE Energy merged with TRACS International, where he continued with petroleum and completion engineering studies, leading integrated teams, and developing / delivering training courses for a variety of different clients in diverse world-wide locations. In the last five years, he is independent again - focusing on technical consulting and course delivery. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

DATABASE DESIGN TRAINING COURSE DESCRIPTION Although this course mentions Microsoft Access the same course can be run with a variety of different databases. The duration of the course is dependent on the experience of the delegates. WHAT WILL YOU LEARN * Name and give 3 types of database structure. * Explain the difference between standard SQL and different flavours. * Use SQL statements to query databases. * Use SQL statements to query and define databases. * Describe the principles of relational database design and 3 types of relational joins. * Normalise a given flat file table into relational tables. DATABASE DESIGN TRAINING COURSE DETAILS * Who will benefit: Anyone who needs to be able to design an efficient, watertight database following the best practice of the principles of Relational Database design. * Prerequisites: None. * Duration 3 days DATABASE DESIGN TRAINING COURSE CONTENTS * Database structure and terminology. * Principles of Relational Database Design. * Types of relationship. * Normal Forms. * Practical examples of relational database design. * Hands-on creation of a database. * On paper design a relational database applicable to the delegates work.

OOAD TRAINING COURSE DESCRIPTION A workshop course providing thorough practical knowledge of object oriented analysis and design methods. WHAT WILL YOU LEARN * Perform Systems Analysis with Object Oriented methods. * Identify key classes and objects. * Expand and refine OO problem domain models. * Design Class hierarchies using inheritance and polymorphism. * Design programs with Object Oriented methods. OOAD TRAINING COURSE DETAILS * Who will benefit: System analysts, designers, programmers and project managers. * Prerequisites: It is desirable that delegates have experience of programming in C++/Java or some other OOP language. * Duration 5 days OOAD TRAINING COURSE CONTENTS * What is OO? Classes, objects, messages, encapsulation, associations, inheritance, polymorphism, reusability. * What is Systems Analysis and design? Data flow diagrams, structure diagrams. The OO approach. * OOA The problem domain and object modelling. Identifying classes and objects. Generalisation and inheritance. Defining attributes and methods. * OOD Refining the OOA results. Designing the User Interface. Designing the algorithms and data structures using objects. Designing the methods. * OOP Prototyping. Implementing OOD with OOPs and OOPLs.