141 Courses

rya competent crew course UK, sailing scotland,

RYA Competent Crew or Day Skipper - £770 A five day practical course which can accommodate both Day Skipper and Competent Crew candidates, depending on ability and course requirements. We familiarise you with the yacht and spend the week port hopping whilst you gain experience and work towards your qualification. Competent Crew - An ideal way to develop your skills and to start to become an active crew member capable of contributing to the running of a boat. Course content includes learning how to steer the boat, what the sails do, knot-tying, basic seamanship principles and safety procedures. Day Skipper - Putting Day Skipper level theory into practice and taking command of both the boat and crew, you will also learn learn basic engine checks. This includes building on previous experience and developing new skills for close quarter manouevring, handling under power and sail, day navigation, with some night hours.   RYA Coastal Skipper / Yachtmaster™ Preparation - £770 A five day practical course for Coastal Skipper or preperation Yachtmaster™ candidates, this course will build and refine your skills and knowledge, including your planning and skippering for passages with pilotage at day and night, boat handling and safety and emergency procedures. If you are looking to gain the Yachtmaster™ Offshore or Coastal Certificate, please let us know and we will arrange an examiner for you. We cannot over emphasise the need for personal preparation for this exam; your theory knowledge should be instinctive and you should exercise safe practices and judgment without being too overcautious. Primarily you will be examined on  your ability to be a good skipper. Our emphasis during this course is consolidate all that you have already learned and fine tune any areas that need improvement. You will be expected to be fully skilled in the following areas: communication with crew members, confident and competent boat handling, high standard chart work and navigation, safety briefings and procedures, radio communication, meteorology skills.   -------------------------------------------------------------------------------- Our current school boat is the modern 2017 Dufour 382, a fantastic boat to learn and develop your knowledge on; with her spacious deck layout,dual helm and on-deck plotter, she is easy to handle in close and open quarters. We pride ourselves on providing a comfortable, enjoyable sailing experience and guarantee all students their own cabin.   Facilities on-board include: • Dual helm • Heating • Fridge • Two toilets each with hot water and showers • Three cabins • Television and radio • Charging points for mobiles • On-deck chart plotter and radar   We carry out a deep clean before every course and provide fresh linen and towels. Operating along the picturesque South Devon coast, we venture to prime local cruising locations such as Torbay, Dartmouth, Salcombe and Plymouth. Marinas feature as a daily stop, providing time to reflect and partake in shore-side activities. Our aim is to provide safe fun on the water, allowing you to develop your skills and knowledge in a safe and friendly environment. We use a 3:1 students to instructor raitio, which allows our experienced RYA instructors to tailor courses to the various levels and needs on board, and deliver at a managable pace. Navigation is taught using traditional charting techniques along with electronic methods using E-Series Raymarine chart plotters and Radar. All course prices include accommodation on board, meals for the duration of the course, fuel and mooring fees, and the provision of fresh linen and towels.Waterproofs are available upon request.

Trauma Risk Management is an evidence based, peer delivered risk assessment and ongoing support system, designed specifically to help in the management of traumatic events.

Mechanical, Electrical and Trim - MET Technician: A Lucrative Career with Great Job Opportunities The demand for MET technicians is growing rapidly in the UK, with a projected shortage of over 20,000 workers by 2025. This is due to the increasing complexity of vehicles, as well as the growing popularity of electric and hybrid cars. MET technicians are responsible for the maintenance and repair of vehicles, including the mechanical, electrical, and trim systems. They work in a variety of settings, including car dealerships, repair shops, and manufacturing plants. The average salary for a MET technician in the UK is £35,000 per year. However, experienced technicians can earn much more. For example, a senior MET technician can earn up to £50,000 per year. If you are looking for a rewarding and lucrative career in the automotive industry, then becoming a MET technician is a great option. And our MET technician course can help you to kickstart your journey. Key Features * CPD Accredited * Instant e-certificate * Fully online, interactive course with audio voiceover * Developed by qualified professionals * Self-paced learning and laptop, tablet, smartphone-friendly * 24/7 Learning Assistance * Discounts on bulk purchases Enrol Today and Start Your Career as a MET Technician! The Mechanical, Electrical and Trim (MET) Technician course is a comprehensive program that will teach you the knowledge you need to become a successful MET technician. You will learn about the mechanical, electrical, and trim systems of vehicles, as well as the tools and equipment used to repair them. You will also learn about safety procedures and how to work efficiently. Course Curriculum Mechanical, Electrical and Trim - MET Technician * Module 01: Introduction to MET Technician Course * Module 02: Precautions and Safety * Module 03: Body Panel Alignment * Module 04: SRS Components, Cooling System and On-Board Diagnostics * Module 05: Vehicle Suspension * Module 06: Vehicle Alignment Learning Outcomes By the end of this course, you will be able to: * Identify and diagnose mechanical, electrical, and trim problems * Perform routine maintenance and repairs on vehicles * Use diagnostic tools and equipment * Work safely and efficiently * Comply with industry standards * Communicate effectively with customers and colleagues Accreditation This MET Technician Management is Accredited by CPD, providing you with up-to-date skills and knowledge and helping you to become more competent and effective in your chosen field. Certification Once you've successfully completed your course, you will immediately be sent a digital certificate. Also, you can have your printed certificate delivered by post (shipping costs £3.99). CPD 10 CPD hours / points Accredited by CPD Quality Standards WHO IS THIS COURSE FOR? This course is for anyone who wants to learn the skills to become a MET technician. It is a good fit for people who are interested in working in the automotive industry and who have a strong mechanical aptitude. REQUIREMENTS Learners do not need any prior qualifications to enrol in this course. CAREER PATH * Automotive Technician: £25,000 - £40,000 * Bodywork Technician: £20,000 - £35,000 * Electrical Technician: £25,000 - £40,000 * Mechanic: £20,000 - £35,000 * Trim Technician: £20,000 - £35,000 CERTIFICATES CERTIFICATE OF COMPLETION (HARD COPY) Hard copy certificate - Included CERTIFICATE OF COMPLETION (PDF) Digital certificate - Included

Unlock a world of possibilities in the automotive industry with our "Mechanical, Electrical and Trim - MET Technician With Complete Career Guide" course. Dive into the intricacies of body panel alignment, SRS components, and vehicle suspension, guided by our comprehensive curriculum. Join a field where precision is paramount, and safety is non-negotiable. In the UK, the demand for skilled MET Technicians is soaring, with lucrative career paths awaiting those who master these essential skills. Seize the opportunity to enhance your automotive expertise and secure a fulfilling future. Enrol now and embark on a journey towards a rewarding career. HGV Training, MET Technician Course, Vehicle Alignment, Automotive Career, Safety Protocols, On-board Diagnostics, Body Panel Alignment, Suspension Systems, Automotive Enthusiasts, Precision Skills, Automotive Maintenance. ________________________________________________________________________ Key Features: * CPD Certified Mechanical, Electrical and Trim - MET Technician With Complete Career Guide * 10 Instant e-certificate and hard copy dispatch by next working day * Fully online, interactive course with audio voiceover * Developed by qualified professionals in the field * Self-paced learning and laptop, tablet, smartphone-friendly * 24/7 Learning Assistance * Discounts on bulk purchases Course Curriculum: * Module 01: Introduction to MET Technician Course * Module 02: Precautions and Safety * Module 03: Body Panel Alignment * Module 04: SRS Components, Cooling System and On-Board Diagnostics * Module 05: Vehicle Suspension * Module 06: Vehicle Alignment ________________________________________________________________________ Complete Career Guide for Mechanical, Electrical and Trim - MET Technician (A to Z) This isn't just a course; it's your ticket to thriving in the sector and your roadmap to the MET Technician. In addition to mastering the essentials of MET Technician, you'll also gain valuable skills in CV writing, job searching, communication, leadership, and project management. These 9 complementary courses are designed to empower you at every stage of your journey. Stand out in your career, from crafting a winning CV to excelling in interviews. Develop the leadership skills to inspire your team and efficiently manage projects. This holistic approach ensures you're not just job-ready but career-ready. Enrol today, and let's build your success story together in MET Technician. Your dream career starts here! List of career guide courses included in Mechanical, Electrical and Trim - MET Technician With Complete Career Guide: * Course 01: Professional CV Writing and Job Searching * Course 02: Communication Skills Training * Course 03: Career Development Training * Course 04: Time Management * Course 05: Returning to Work Training * Course 06: Level 3 Diploma in Project Management * Course 07: Leadership Skills * Course 08: Body Language * Course 09: Interview and Recruitment ________________________________________________________________________ Learning Outcomes: * Introduction Mastery: Understand the fundamental concepts of MET Technician practices. * Safety Proficiency: Demonstrate adherence to safety protocols in automotive settings. * Precision in Panel Alignment: Attain expertise in aligning vehicle body panels accurately. * Comprehensive System Knowledge: Acquire in-depth understanding of SRS components, cooling systems, and on-board diagnostics. * Suspension Expertise: Gain proficiency in assessing and repairing vehicle suspension systems. * Alignment Precision: Develop skills for precise vehicle alignment, ensuring optimal performance. ________________________________________________________________________ Accreditation All of our courses, including the Mechanical, Electrical and Trim - MET Technician With Complete Career Guide, are fully accredited, providing you with up-to-date skills and knowledge and helping you to become more competent and effective in your chosen field. Certification Once you've successfully completed your Mechanical, Electrical and Trim - MET Technician With Complete Career Guide, you will immediately be sent your digital certificates. Also, you can have your printed certificate delivered by post (shipping cost £3.99). Our certifications have no expiry dates, although we recommend renewing them every 12 months. Assessment At the end of the courses, there will be an online assessment, which you will need to pass to complete the course. Answers are marked instantly and automatically, allowing you to know straight away whether you have passed. If you haven't, there's no limit on the number of times you can take the final exam. All this is included in the one-time fee you paid for the course itself. CPD 100 CPD hours / points Accredited by CPD Quality Standards WHO IS THIS COURSE FOR? * Individuals aspiring to become MET Technicians. * Automotive enthusiasts seeking specialised skills. * Professionals aiming to broaden their automotive expertise. * Anyone interested in vehicle bodywork and repair. * Those pursuing a career in automotive maintenance. CAREER PATH * MET Technician - £25K to 35K/year. * Automotive Body Repairer - £22K to 30K/year. * Vehicle Painter - £24K to 32K/year. * Automotive Technician - £26K to 38K/year. * Quality Control Inspector - £28K to 40K/year CERTIFICATES 10 CPD ACCREDITED E-CERTIFICATES Digital certificate - Included 10 CPD ACCREDITED HARD COPY CERTIFICATES Hard copy certificate - Included

Properly employed and supported, TRiM Practitioners can make a significant contribution to staff welfare by offering structured peer support and TRiM assessments to colleagues. TRiM practitioners are trained to identify the risk factors for the development of post traumatic stress and to know when to signpost colleagues to professional support.

Properly employed and supported, TRiM Practitioners can make a significant contribution to staff welfare by offering structured peer support and TRiM assessments to colleagues. TRiM practitioners are trained to identify the risk factors for the development of post traumatic stress and to know when to signpost colleagues to professional support.

8 Week pottery course for beginners specialising in pottery wheel techniques

Level Three, the final learning stage of our professional development courses, aims to bring you to the highest standard of advanced detailing skill through the spectrum of; rotary polisher techniques, wet sanding by machine and refinement, a full understanding of SMAT and DAT polishes and compounds and their role in efficiency and correction on different paint types, a wide selection of pads and equipment such as nano polishers and attachments. Mechanical training in wheel removal and jacking on multiple vehicle styles allowing deep cleaning access to vehicle arch and components, and specialist finishes on carbon fibre, GRP and gel coat are examined, demonstrated and explained. Level Three aims to bring you to the highest standard of advanced detailing skill, through the spectrum of rotary polisher techniques, wet sanding by machine, a full understanding of SMAT and DAT polishes and compounds, a wide selection of pads and equipment such as nano polishers and attachments. Mechanical training in wheel removal and jacking on multiple vehicle styles allowing deep cleaning access to vehicle arch and components, and specialist finishes on carbon fibre, GRP and gel coat are examined and explained. • DAT/SMAT technology • Pneumatic polishers and sanders • Advanced Dual Action technique • Rotary machine polishers • Glass polishing • Wheel removal • Under-arch cleaning • Cleaner chemistry • Time management and planning • Trim and seat removal • In-depth interior detailing • Cloth types • Advanced Dual Action technique • Rotary machine polishers • Mini/nano machine polishers • Wet-sanding • Advanced pad types • GRP, carbon and insulative substrates • Badge and trim removal • Texture levelling • Show preparation • Ceramic coatings • Polymer coatings • Coating troubleshooting • Coatings after-care • Fillers and glazes for show finishes • Business management • Business administration • Safe working practices • Safe vehicle lifting - ramp/jacking • Workshop planning • Advanced chemical knowledge • Risk assessments • Gloss meter usage • PPE • Employee management Following completion of training and ongoing assessment, case studies and exercises will lead to the level three exam and, upon grading, award of our advanced detailing Level 3 Detailing. Course Length 3 Days (0930 - 1600) Group Size One-to-One Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Completion of Level 2 Refreshments or Lunch Refreshments included

ABOUT THIS TRAINING COURSE This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans. This course provides also a comprehensive explanation of all boiler combustion control systems including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system as well as their tuning methods. All boiler control systems are covered as well in this course including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, boiler-turbine coordinated control, etc. The course provides also detailed explanation of Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code). The burner management systems (BMS) and examples of boiler permissive starting logic and protective tripping logic will be explained thoroughly. The various methods used to calculate the boiler efficiency are covered in detail in this course including the direct and indirect methods. All the factors which affect the efficiency and emissions of pulverized coal boiler and CFB boiler will be explained thoroughly. The course covers also all the methods used to improve the efficiency of pulverized coal boilers and CFB boilers including improvement to their combustion efficiency and control systems performance. Training Objectives * Boiler Combustion Equipment and Systems: Gain an in-depth understanding of all boiler combustion equipment and systems including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans * Boiler Combustion Control Systems: Gain a thorough understanding of all boiler combustion control systems for pulverized coal boilers, and CFB boilers including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system * Boiler Conventional Control Systems: Gain an in-depth understanding of all boiler conventional control systems including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, and boiler-turbine coordinated control * Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code): Learn about NFPA 85 code and ANSI/ISA-77-44-01-2007 code * Burner Management System and Boiler Permissive Starting Logic and Protective Tripping Logic: Gain an in-depth understanding of burner management system and boiler permissive starting logic and protective tripping logic * Boiler Efficiency Calculations: Learn how to calculate the boiler efficiency using the direct and indirect methods * Factors Affecting the Efficiency and Emissions of Boilers: Understand all the factors which affect the boiler efficiency and emissions * Methods Used to Improve the Efficiency of Boilers: Learn about all the methods used to improve the efficiency of pulverized coal boilers, and CFB boilers including improvement to their combustion efficiency and control systems performance * Boiler Instrument and Piping Diagrams: Gain an in-depth understanding of all boiler instrument and piping diagrams * CFB and Pulverized Coal Boilers Equipment and Systems: Learn about various types of equipment and systems used in CFB and pulverized coal boilers including economizers, steam drum, superheaters, air preheaters, ammonia injection systems, etc. Target Audience * Engineers of all disciplines * Managers * Technicians * Maintenance personnel * Other technical individuals Course Level * Basic or Foundation Training Methods Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Each delegate will receive a copy of the following materials written by the instructor: * Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages) * Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages) * COMBUSTION ENGINEERING FOR COAL FIRED POWER PLANTS MANUAL (includes practical information about combustion engineering for coal fired power plants - 550 pages) Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; * Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. * Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. * Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. * Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). * Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: * The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 * The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). * The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). * Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations