Name: Electrical Generators, Excitation Systems and Governing Systems
Price: 3009 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Wind has surpassed hydro-power generation in many countries recently. Wind energy offers many advantages, which explains why it's one of the fastest-growing energy sources in the world. The following are the advantages of wind power:</p>
<ul>
<li>Wind power is cost effective: Land-based utility-scale wind is one of the lowest-priced energy sources available today</li>
<li>The fuel for wind power is free. This reduces the operation and maintenance cost of wind power plants significantly</li>
<li>Wind is a clean source of power generation that does not pollute the air like power plants which rely on combustion of fossil fuel</li>
<li>Wind power plants create jobs. Wind turbine technician is the fastest growing career in many countries</li>
<li>Wind enables industry growth and competitiveness due to its low cost</li>
<li>Wind power is a domestic source of energy. The wind supply is abundant and inexhaustible. The wind power generation capacity has become the largest source of renewable power in many countries</li>
<li>Wind turbines can be built on existing farms and ranches. This greatly benefits the economy in rural areas, where most of the best wind sites are found. Wind power plant owners make rent payments to the farmers or ranchers for the use of their land, providing landowners with additional income</li>
</ul>
<p>This 5 half-day course covers all aspects of wind power plants including evaluation of a potential location for a wind power plant using wind data and using statistical distributions to approximate available wind energy at a wind power plant site. It provides also an in-depth understanding of all wind power plant equipment including wind turbines, generators, instrumentation and control systems, drive trains, gearboxes, doubly fed induction generators, synchronous generators, nacelles, towers, transformers, etc.</p>
<p>The economics of a wind power plant including economic analysis of wind power generation, economic comparison between a large- and small-scale wind power plant, economic decision making, rate of return from a wind power plant, economic life and replacement of a wind power plant as well as the cost of electricity from wind power plants are covered in detail in this course. A thorough explanation of the design, operation and maintenance of on-shore and off-shore wind farms is presented in detail in this course as well as all the significant improvements that have been made to wind power generating plants during the last two decades.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Evaluation of a Potential Location for a Wind Power Plant Using Wind Data: </span></strong><span>Learn how to evaluate the potential location for a wind turbine power plant using wind data.</span></li>
<li><strong><span>Using Statistical 'Rayleigh' Distribution to Approximate Available Power Generation from a Wind Turbine at a Specific Site:</span></strong><span> Learn how to use statistical 'Rayleigh' distribution to approximate available power generation from a wind turbine at a specific site.</span></li>
<li><strong><span>Calculate the Wind Energy Available at a Site: </span></strong><span>Gain an understanding on how to calculate the wind energy available at a site.</span></li>
<li><strong><span>Rated Capacity of a Wind Facility and Capacity Factor: </span></strong><span>Understand how to determine the rated capacity of a wind facility and its capacity factor.</span></li>
<li><strong><span>Designing a Wind Power Generating Plant:</span></strong><span> Learn how to design a wind power generating plant.</span></li>
<li><strong><span>Wind Power Plant Equipment Operation and Maintenance:</span></strong><span> Understand the operation and maintenance requirements for all wind power plant equipment including wind turbines, generators, nacelles, towers, transformers, etc.</span></li>
<li><strong><span>Wind Power Plant Instrumentation and Control Systems: </span></strong><span>Gain a thorough understanding about the latest instrumentation and control systems of wind power</span> <span>plants.</span></li>
<li><strong><span>Economics of Wind Power Plants: </span></strong><span>Gain a thorough understanding of the economics of wind power plants including economic analysis of wind power generation, economic comparison between a large- and small-scale wind power plant, comparison of alternatives, rate of return from a wind power plant, financial statements for a wind power plant, cost of electricity from a wind power plant, and levelized cost of wind energy.</span></li>
</ul>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a soft copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>POWER GENERATION HANDBOOK' second edition, published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Wind Power Generating Plant Manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Wind Power Generation: Advantages, Design, Site Selection, Equipment Selection, Operation and Maintenance, On-Shore and Off-Shore Wind Farms, Economics, Rate of Return, and Cost of Electricity from Wind Power Plants

Team of 10, pp

Normal Fee, pp

Redhill

<h3><b>CCNP training course description</b></h3>
        <p>The Implementing and Operating Cisco Enterprise
Network Core Technologies (ENCOR) v1.2 course
provides the knowledge and skills needed to configure,
troubleshoot, and manage enterprise wired and
wireless networks. You'll learn to implement security
principles within an enterprise network and how to
overlay network design using solutions such as SDAccess and SD-WAN. Course content includes 3 days
of self-study material. This course helps you prepare for
the 350-401 Implementing Cisco Enterprise Network
Core Technologies (ENCOR) exam</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
     <li>Configure, troubleshoot, and manage enterprise
wired and wireless networks</li>
<li> Implement security principles within an enterprise
network</li>
<li> Prepare you prepare to take the 350-401
Implementing Cisco Enterprise Network Core
Technologies (ENCOR) exam
</li>
 
                  </ul>
        <h5>
        <b>CCNP training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>
   Mid-level network engineers, Network administrators,
Network support technicians, Help desk technicians.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>Implementation of Enterprise LAN networks. Basic
understanding of Enterprise routing and wireless
connectivity, and Python scripting</p>
              
							<li><b>Duration</b></li>
							
              <p>5 days</p>
              
							
              
              
						</ul>
					</div>
				</div>
			
				 <h3><b>CCNP training course content</b></h3>
				
      <ul>
				<li>Cisco Enterprise Network Architecture:</li>

 Access,
distribution, core in the hierarchical network.
Cisco Switching Paths: Switching mechanisms, TCAM,
CAM, process switching, fast switching, and CEF.
		  <li>
Implementing Campus LAN Connectivity:</li> Troubleshoot
L2 connectivity using VLANs and trunking<br />
		  <b>Building Redundant Switched Topology:</b> STP<br />
		  
Implementing Layer 2 Port Aggregation<br />
Troubleshoot link aggregation using Etherchannel<br />
EIGRP<br />
Implement and optimize OSPFv2/v3, including
adjacencies, packet types, and areas, summarization,
and route filtering for IPv4/v6<br />
Implement EBGP interdomain routing, path selection,
and single and dual-homed networking<br />
		  <b>Implementing Network Redundancy:</b> HSRP and VRRP<br />
Implement static and dynamic NAT<br />
Virtualization Protocols and Techniques<br />
		  <b>VPNs and Interfaces:</b> Overlay technologies such as VRF,
GRE, VPN, and LISP
		  <b>Wireless Principles:</b> RF, antenna characteristics, and
wireless standards.<br />
<b>Wireless Deployment:</b> Models available, autonomous AP
deployments and cloud-based designs within the
centralized Cisco WLC architecture<br />
Wireless Roaming and Location Services<br />
<b>Wireless AP Operation:</b> How APs communicate with
WLCs to obtain software, configurations, and centralized
management<br />
<b>Wireless Client Authentication:</b> EAP, WebAuth, and PSK
wireless client authentication on a WLC.<br />
Troubleshoot wireless client connectivity issues using
various available tools<br />
Troubleshoot networks using services such as NTP,
SNMP, Cisco IP SLAs, NetFlow, and Cisco IOS EEM
Explain network analysis and troubleshooting tools,
which include show and debug commands, as well as
best practices in troubleshooting<br />
<b>Multicast Protocols:</b> IGMP v2/v3, PIM DM/SM and RPs
<b>Introducing QoS:</b> Concepts and features.<br />
Implementing Network Services: Secure administrative
access for Cisco IOS devices using CLI access, RBAC,
ACL, and SSH, and device hardening concepts to secure
devices from less secure applications<br />
Using Network Analysis Tools<br />
<b>Infrastructure Security:</b> Scalable administration using
AAA and the local database, features and benefits<br />
Enterprise Network Security Architecture: VPNs,
content security, logging, endpoint security, personal
firewalls, and other security features.<br />
Automation and Assurance with Cisco DNA Center:
Purpose, function, features, and workflow. Intent-Based
Networking, for network visibility, proactive monitoring,
and application experience<br />
<b>Cisco SD-Access Solution:</b> Nodes, fabric control plane,
and data plane, VXLAN gateways<br />
<b>Cisco SD-WAN Solution:</b> Components and features of
Cisco SD-WAN solutions, including the orchestration,
management, control, and data planes<br />
	<b>Basics of Python Programming:</b> Python components
and conditionals with script writing and analysis<br />
Network Programmability: NETCONF and RESTCONF
		  APIs in Cisco DNA Center and vManage<p></p>

<li>Labs: </li><p>
Investigate the CAM. Analyze CEF. Troubleshoot
VLAN and Trunk Issues. Tuning STP and Configuring
RSTP. Configure MSTP. Troubleshoot EtherChannel.
Implement Multi-area OSPF. Implement OSPF Tuning.
Apply OSPF Optimization. Implement OSPFv3.
Configure and Verify Single-Homed EBGP.
Implementing HSRP. Configure VRRP. Implement
NAT. Configure and Verify VRF. Configure and Verify a
GRE Tunnel. Configure Static VTI Point-to-Point
Tunnels. Configure Wireless Client Authentication in a
Centralized Deployment. Troubleshoot Wireless Client
Connectivity Issues. Configure Syslog. Configure and
Verify Flexible NetFlow. Configuring Cisco IOS EEM.
Troubleshoot Connectivity and Analyze Traffic with
Ping, Traceroute, and Debug. Configure and Verify
Cisco IP SLAs. Configure Standard and Extended
ACLs. Configure Control Plane Policing. Implement
Local and Server-Based AAA. Writing and
Troubleshooting Python Scripts. Explore JSON Objects
and Scripts in Python. Use NETCONF Via SSH. Use
RESTCONF with Cisco IOS XE. 
</p>
      </ul>

Systems & Network Training

Network & Security

Network Engineer

CCNP core

General Admission

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Managing process hazards in the hydrocarbon and chemical processing industries is a critical function that requires relevant knowledge and skills due to the risks involved. The Advanced Process Safety Engineering course will discuss the interrelation of the various techniques of process safety for analysing, with a particular emphasis on engineering design aspects, as well as how to manage process hazards in a safe and effective way and how they can potentially be avoided.</p>
<p>In this 3 full-day advanced level course, the expert course leader will provide participants with insights and examples from his career and experience to show how their learning should be applied in real-life situations. Feedback and questioning is highly encouraged. Reference material and reports can be provided to give more information on any particular topic of interest. Individual and group exercises, tutored exercises and video case studies will be provided throughout the course to underpin the key learning points.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will acquire in-depth knowledge of:</p>
<ul>
<li>Risk management and 'As Low as Reasonably Practicable' (ALARP) principles.</li>
<li>Different aspects of process design that influence process safety.</li>
<li>Approach to 'inherently safer' design.</li>
<li>Defence in depth using 'layers of protection'.</li>
<li>Process for ensuring the technical integrity of safety-critical equipment.</li>
<li>Hazards associated with process materials.</li>
<li>Range of hazard identification and consequence modelling techniques.</li>
<li>Causes and mitigation of human error.</li>
<li>Reliability and availability of safety-critical protection equipment.</li>
<li>Role of engineered safety-critical equipment and systems.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is suitable for industry professionals who need to acquire a comprehensive understanding of process safety. This includes those who are required to make managerial decisions where process safety is a key consideration, those who are moving into process safety positions or those who wish to broaden their process safety knowledge within their existing discipline.</p>
<p>It is particularly suited for anyone involved in the design, operation, modification or maintenance of a major hazard installation, and will demonstrate a substantial understanding of process safety for those engaged in Continuous Professional Development or aiming for Chartered Engineer status.</p>
<p>This course will benefit professionals such as:</p>
<ul>
<li>Operations and maintenance supervisors</li>
<li>Process, mechanical and chemical engineers and technicians</li>
<li>Design engineers, project engineers and HSE managers</li>
<li>Control, automation and instrumentation engineers</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Advanced</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has 50 years' experience in chemical and process safety engineering. His early career included 20 years in design and project engineering with various fine chemical and pharmaceutical companies where he designed chemical processes, specified plant equipment and selected materials for highly corrosive and toxic processes, often where textbook data was not available. This was followed by 10 years in offshore oil and gas design projects where he was responsible for setting up a Technical Safety group to change design safety practices in the aftermath of the 1988 Piper Alpha disaster. In recent years, he has been called upon to conduct various offshore and onshore incident investigations.</p>
<p>His career has given him experience in project engineering, project management, process design and operations, safety engineering and risk management. He is a Fellow of the UK Institution of Chemical Engineers. He served on the Scottish Branch committee, and was elected chairman for a two-year term in 1991. He has also been chairman of the Safety and Reliability Society - North of Scotland Branch.</p>
<p>He has delivered training courses in Process Hazard Analysis (HAZOP and HAZID), Process Safety Management, Hazard Awareness, Risk Assessment, Root Cause Analysis, Failure Modes &amp; Effect Analysis and has lectured on Reliability Analysis to the M.Sc. course in Process Safety and Loss Prevention at Sheffield University. In addition to delivering training courses, he currently facilitates HAZOP / HAZID / LOPA studies and undertakes expert witness roles advising lawyers engaged in contractual disputes, usually involving the design or construction of chemical plants or Oil &amp; Gas production facilities, or criminal prosecutions.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Advanced Process Safety Engineering

Nuneaton

PFTP Ltd

NTDA REACT Licence to Work on the Roadside

<h3><b>CCNA training course description</b></h3>
        <p>The Implementing and Administering Cisco
Solutions (CCNA) course gives you a broad range of
fundamental knowledge for all IT careers. Through a
combination of lecture, hands-on labs, and self-study,
you will learn how to install, operate, configure, and
verify basic IPv4 and IPv6 networks. The course covers
configuring network components such as switches,
routers, and wireless LAN controllers; managing
network devices; and identifying basic security threats.
It also gives a foundation in network programmability,
and software-defined networking</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
     <li>Install, configure, and operate a small to medium
sized network</li>
<li> Gain a foundation in the essentials of networking,
security, and automation</li>
<li> Prepare for the 200-301 CCNA exam, which
earns CCNA certification</li>
 
                  </ul>
        <h5>
        <b>CCNA training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>
    Network support help desk technicians involved in the
basic installation, operation, and verification of Cisco
networks. Anyone seeking CCNA certification.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>Introduction to Data communications &amp; networking</p>
              
							<li><b>Duration</b></li>
							
              <p>5 days</p>
              
							
              
              
						</ul>
					</div>
				</div>
			
				 <h3><b>CCNA training course content</b></h3>
				
      <ul>
				<li>After taking this course, you should be able to:</li><p>
Identify the components of a computer network and
describe their basic characteristics.<br />
Understand the model of host-to-host communication.<br />
Describe the Cisco IOS software.<br />
Describe LANs and the role of switches within LANs.<br />
Describe Ethernet and describe the operation of switches.<br />
Install a switch and perform the initial configuration.<br />
Describe the TCP/IP Internet layer, IPv4, its addressing
scheme, and subnetting.<br />
Describe the TCP/IP Transport and Application layers
Explore functions of routing.<br />
Implement basic configuration on a Cisco router.<br />
Explain host-to-host comms across switches and routers.<br />
Identify and resolve common switched network issues
and common problems associated with IPv4 addressing.<br />
Describe IPv6 main features and addresses, and
configure and verify basic IPv6 connectivity.<br />
Describe static routing.<br />
Describe, implement, and verify VLANs and trunks.<br />
Describe inter VLAN routing.<br />
Explain the basics of dynamic routing protocols and
describe components and terms of OSPF.<br />
Explain how STP and RSTP work.<br />
Configure link aggregation using EtherChannel.<br />
Describe the purpose of Layer 3 redundancy protocols.<br />
Describe basic WAN and VPN concepts.<br />
Describe the operation of access control lists (ACLs) and
their applications in the network.<br />
Configure Internet access using DHCP clients and
explain and configure NAT on Cisco routers.<br />
		  Describe
basic QoS concepts.<br />
Describe the concepts of wireless networks, which types
of wireless networks can be built, and how to use
Wireless LAN Controllers (WLCs).<br />
Describe network and device architectures, introduce
virtualization, network programmability and SDN and
describe smart network management solutions such as
Cisco DNA Centerâ¢, SD-Access, and SD-WAN.<br />
Configure basic IOS system monitoring tools.<br />
Describe the management of Cisco devices.<br />
Describe the current security threat landscape.<br />
Describe threat defence technologies.<br />
		  Implement a basic
security configuration of the device management plane.<br />
Implement basic steps to harden network devices. 

</p><li>Detailed course outline</li><p>
Exploring the Functions of Networking.<br />
The Host-to-Host Communications Model.<br />
Operating Cisco IOS Software.<br />
Introducing LANs.<br />
Exploring the TCP/IP Link Layer.<br />
Starting a Switch.<br />
The TCP/IP IP layer, IPv4 Addressing, and Subnets.<br />
The TCP/IP Transport Layer and Application Layer.<br />
Exploring the Functions of Routing.<br />
Configuring a Cisco Router.<br />
Exploring the Packet Delivery Process.<br />
Troubleshooting a Simple Network.<br />
Introducing Basic IPv6.<br />
Configuring Static Routing.<br />
Implementing VLANs and Trunks.<br />
Routing Between VLANs.<br />
Introducing OSPF.<br />
Redundant Switched Topologies with EtherChannel.<br />
Explaining Basics of ACL.<br />
Enabling Internet Connectivity.<br />
Explaining the Evolution of Intelligent Networks.<br />
Introducing System Monitoring.<br />
Managing Cisco Devices.<br />
Securing Administrative Access.<br />
Implementing Device Hardening.


</p><li>Self-Study: </li><p>
Building Redundant Switched Topologies.<br />
Exploring Layer 3 Redundancy.<br />
Introducing WAN Technologies.<br />
Introducing QoS.<br />
Explaining Wireless Fundamentals.<br />
Introducing Architectures and Virtualization.<br />
Examining the Security Threat Landscape.<br />
Threat Defense Technologies. 
</p>
      </ul>

CCNA

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This course will provide detailed learning to the various aspects of the design, analysis and operation of subsea control systems for a variety of field development options to allow effective management of subsea facilities either from offshore structures or from shore bases.  This will include power and telemetry focussing on electrical, hydraulic and electro-hydraulic systems, shut down systems, and application of intelligent monitoring and 'smart' fields.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><strong>By attending this course, participants will be able to:</strong></p>
<ul>
<li>To provide detailed knowledge and understanding of the requirements for, and design of, subsea electrical, electro-hydraulic, hydraulic and programmable control systems.</li>
<li>Knowledge of the components and uses of a wide variety of subsea control systems the requirements for and design implications, of umbilicals and control lines (power and telemetry)</li>
<li>Knowledge of, and ability to model, power requirements subsea and detailed understanding of the requirements and objectives of pre-commissioning, both at the factory and in situ.</li>
<li>Knowledge of the standards involved in design of equipment, control and application of manual and automatic shut-down valves, and emergency response systems</li>
<li>Introduction to design of redundancy and the role of spare capacity and to be able to put this knowledge to effect to contribute to detailed field design.</li>
<li>An understanding of obsolescence management in subsea control systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is intended for Offshore and Onshore Subsea Production Control Systems; Engineers, Technicians, Supervisors, Operators; Graduates; Apprentices; transfers from other industries, and existing staff with a limited exposure to Production Control and a need to understand the more technical aspects of the system.</p>
<p>Companies not directly involved in the day-to-day support of the industry, but occasionally involved in supplying and supporting operators; manufacturers and suppliers of Oil and Gas equipment and services may also find this a useful course to understand how their equipment and technical expertise is integrated into the Offshore system.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>For most of his working life, your expert course leader has been in a role that has enabled him to pass on skills and knowledge to others. A full-time role in Training and Development came about in 1996 with the offer to take up a full-time teaching post at Aberdeen College. In 1998, he was recruited by Kvaerner Oilfield Products, an Oil &amp; Gas industry company, specialising in Subsea Control Systems, to develop and implement a Training &amp; Competence program acceptable for its staff of over 600 and their client companies - a challenge he could not resist. In 2003, he broadened his horizons and became an independent Training &amp; Development consultant. Building a reputation for delivering training and development to the Oil &amp; Gas industry to the highest standards, he later joined Jee Ltd, a leading subsea engineering and training company based in Aberdeen. He was tasked with a wide portfolio of training, coaching &amp; mentoring to achieve high levels of competence for the client's staff and customers. He is also a Science and Engineering Ambassador (Scotland), promoting the need for engineers and technicians for Scotland's industries, a frequent consultant to the European Economic &amp; Social Committee for standardising Vocational Skills training and competence throughout the EU. He holds memberships in the Society of Operations Engineers, Chartered Institute of Personnel &amp; Development and Society of Underwater Technologies.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Subsea Control Systems & Umbilicals

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course covers all the main elements of IChemE's Process Safety Competency framework: culture, knowledge and competence, engineering and design, human factors, systems and procedures, and assurance. Participants will achieve at least the second level of competence 'Basic Application', which is defined as 'Performs fundamental and routine tasks. Requires occasional supervision. Increased functional expertise and ability. Works with others.'</p>
<p>This course examines the interrelation of the various techniques of process safety for analysing and managing process hazards in the hydrocarbon and chemical processing industries. There is a particular emphasis on engineering design aspects with extensive participation in individual and group exercises, tutored exercises and video case studies throughout the course to underpin key learning points. The learning is consolidated in a comprehensive case study and requires collaboration between members of each syndicate.</p>
<p>This course has been reviewed and approved by the Institution of Chemical Engineers. IChemE is the global professional membership organisation for chemical, biochemical and process engineers and other professionals involved in the chemical, process and bioprocess industries. Their knowledge of professional standards, close involvement with industry, education and regulators, and their expertise as a leading global training provider, means they are uniquely positioned to independently assess and approve training courses and professional development programmes across the world.</p>
<figure></figure>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By the end of this course, participants will be able to:</p>
<ul>
<li>Acquire the underpinning knowledge required to achieve process safety competency</li>
<li>Gain a comprehensive understanding of process safety management</li>
<li>Understand the concept of the safety life cycle of a process plant from conceptual design onwards including operation, maintenance and modification</li>
<li>Understand the hazard scenarios associated with a process plant</li>
<li>Understand how risks can be controlled by hardware and procedural measures</li>
<li>Identify and analyse hazard causes and consequences</li>
<li>Recognise when specialist analytical expertise is required</li>
<li>Generate effective and appropriate measures to reduce risks</li>
<li>Justify and communicate practical solutions to non-technical personnel</li>
<li>Explain the rationale for process safety measures to decision makers</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is suitable for<strong> process industry professionals who need to acquire a comprehensive understanding of process safety management, those moving into process safety positions or those who wish to broaden their process safety knowledge within their existing discipline.</strong> It is particularly suited for anyone involved in the design, operation, modification or maintenance of a major hazard installation. This includes:</p>
<ul>
<li>Supervisors, operators and maintainers in Oil &amp; Gas, Petrochemical and Chemical industries,</li>
<li>process, mechanical and chemical engineers and technicians</li>
<li>Design engineers, project engineers and HSE managers</li>
<li>Control, automation and instrumentation engineers</li>
</ul>
<p>It will also demonstrate a substantial understanding of process safety for those engaged in Continuous Professional Development or aiming for the Chartered Engineer status.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has 50 years' experience in chemical and process safety engineering. His early career included 20 years in design and project engineering with various fine chemical and pharmaceutical companies where he designed chemical processes, specified plant equipment and selected materials for highly corrosive and toxic processes, often where textbook data was not available. This was followed by 10 years in offshore oil and gas design projects where he was responsible for setting up a Technical Safety group to change design safety practices in the aftermath of the 1988 Piper Alpha disaster. In recent years, he has been called upon to conduct various offshore and onshore incident investigations.</p>
<p>His career has given him experience in project engineering, project management, process design and operations, safety engineering and risk management. He is a Fellow of the UK Institution of Chemical Engineers. He served on the Scottish Branch committee, and was elected chairman for a two-year term in 1991. He has also been chairman of the Safety and Reliability Society - North of Scotland Branch.</p>
<p>He has delivered training courses in Process Hazard Analysis (HAZOP and HAZID), Process Safety Management, Hazard Awareness, Risk Assessment, Root Cause Analysis, Failure Modes &amp; Effect Analysis and has lectured on Reliability Analysis to the M.Sc. course in Process Safety and Loss Prevention at Sheffield University. In addition to delivering training courses, he currently facilitates HAZOP / HAZID / LOPA studies and undertakes expert witness roles advising lawyers engaged in contractual disputes, usually involving the design or construction of chemical plants or Oil &amp; Gas production facilities, or criminal prosecutions.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Process Safety Management & Engineering Applications

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control. With the growing importance of grid integration of renewables and the interest in smart grid technologies, it is more important than ever to understand the fundamentals that underpin electrical power systems.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Basic Terminology and Concepts of Electrical Systems:</strong> Gain an understanding of the basic terminology and concepts of electrical systems and the structure of a power system</li>
<li><strong>Transmission Line Parameters:</strong> Learn in detail all the transmission line parameters including line resistance, line inductance, transposition of transmission lines, and capacitance of transmission lines</li>
<li><strong>Insulators:</strong> Understand thoroughly all the various types of insulators, pin type insulators, suspension type or disc insulators, strain insulators, and testing of insulators</li>
<li><strong>High-Voltage Direct Current Transmission:</strong> Determine the advantages and disadvantages of high voltage direct current transmission, and gain an understanding of all the features of high-voltage direct current transmission</li>
<li><strong>Substations and Neutral Grounding:</strong> Gain a detailed understanding of all substation equipment, factors governing the layout of substations, station transformers, elements to be earthed in a substation, power system earthing, earthing transformers, bus bar arrangements and gas-insulated substations</li>
<li><strong>Distribution System:</strong> Learn about the effects of voltage on the conductor volume, distributor fed from one end, distributors fed from both ends at the same voltage, distributors fed from both ends at different voltages, and alternating current distribution</li>
<li><strong>Circuit Breakers:</strong> Learn about the classification of circuit breakers, plain-break oil circuit breakers, air break circuit breaker, air blast circuit breakers, vacuum circuit breakers, SF6 circuit breakers, rating and testing of circuit breakers</li>
<li><strong>Relaying and Protection:</strong> Learn all the requirements of relaying, zones of protection, primary and backup protection, classification of relays, electromagnetic relays, induction relays, feeder protection, phase fault protection, reactance relay, static overcurrent relay, differential protection, transformer protection, Buchholz relays, alternator protection restricted earth fault protection, rotor earth fault protection, and negative-sequence protection</li>
<li><strong>Economic Operation of Power Systems:</strong> Gain an understanding of steam power plants, heat rate characteristics and characteristics of hydro plants</li>
<li><strong>Load Frequency Control:</strong> Learn about speed governing mechanism, speed governor, steady state speed regulations and adjustment of governor characteristics</li>
<li><strong>Voltage and Reactive Power Control:</strong> Gain an understanding of impedance and reactive power, system voltage and reactive power, voltage regulation and power transfer</li>
<li><strong>Renewable Energy Sources:</strong> Learn about solar power, wind power, geothermal energy, biomass and tidal power</li>
<li><strong>Restructuring of Electrical Power Systems:</strong> Gain an understanding of smart grids, smart grid components, smart grid benefits, and open smart grid protocol</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Introduction to Power Systems

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>This 5 full-day course will cover all aspects of gas turbines, co-generation and combined cycle power plants. It will cover in detail all the components of these types of power plants such as: compressors, gas and steam turbines, heat recovery steam generators, deaerators, condensers, lubricating systems, instrumentation, control systems, and economics.</p>
<p>The design, selection considerations, operation, maintenance, pay-back period, economics of co-generation plants and combined cycles, as well as, emission limits, reliability, monitoring and governing systems are also covered in detail. This course will also provide up-dated information in respect to all the significant improvements that have been made to co-generation and combined cycles power plants, during the last two decades.</p>
<p>The course will illustrate through sophisticated computer simulation how gas turbines, co-generation and combined cycle plants perform under steady-state and transient conditions. In addition, the participants will learn how to use the computer simulation program which provides the following benefits:</p>
<ol>
<li>Allow the operator to extend the gas turbine operating period by avoiding unnecessary outages and maintenance activities.</li>
<li>Determination of essential gas turbine maintenance activities to reduce the duration of outages.</li>
<li>Profit optimization of co-generation and combined cycle plants.</li>
<li>Minimization of the environmental emissions of co-generation and combined cycle plants.</li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Power Plant Computer simulation:</span></strong><span> Gain a thorough understanding of computer simulation of gas turbines, co-generation, and combined cycle plants.</span></li>
<li><strong><span>Power Plant Components and Systems: </span></strong><span>Learn about all components and subsystems of the various types of power plants such as gas turbines, co-generation and combined cycle plants</span></li>
<li><strong><span>Power Plants Economics: </span></strong><span>Examine the advantages, applications, performance and economics of power plants such as: gas turbines, co-generation, and combined cycle plants</span></li>
<li><strong><span>Power Plant Equipment: </span></strong><span>Learn about various power plant equipment including: compressors, turbines, governing systems, combustors, deaerators, feed water heaters, etc.</span></li>
<li><strong><span>Power Plant Maintenance:</span></strong><span> Learn all the maintenance activities required for power plants such as: gas turbines, co-generation plants and combined cycles to minimize their operating cost and maximize their efficiency, reliability, and longevity</span></li>
<li><strong><span>Power Plant Environmental Emissions:</span></strong><span> Learn about the monitoring and control of environmental emissions.</span></li>
<li><strong><span>Power Plant Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation and control systems of gas turbines, co-generation and combined cycles power plants</span></li>
<li><strong><span>Power Plant Reliability and Testing:</span></strong><span> Increase your knowledge of power plant predictive and preventive maintenance, reliability and testing.</span></li>
<li><strong><span>Power Plant Selection and Applications:</span></strong><span> Gain a detailed understanding of the selection considerations and applications of power plants such as: gas turbines, co-generation and combined-cycle power plants</span></li>
<li><strong><span>Power Plant Profitability:</span></strong><span> Learn about the reliability, life cycle cost, profitability, refurbishment, and life extension methods for gas turbines, co-generation and combined cycle power plants.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' second edition, published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Practical manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Gas Turbines, Co-Generation and Combined Cycle Power Plants

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVRs), governing systems, and protective systems.</p>
<p>The focus will be on maximizing the efficiency, reliability and longevity of these equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p>
<p>The emphasis of this course is on protective systems, inspection methods, diagnostic testing, troubleshooting, modern maintenance techniques, refurbishment, rewind and upgrade options, as well as advanced methods for preventing partial discharge and other failures.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Equipment Operation:</strong> Gain a thorough understanding of the operating characteristics of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Diagnostics and Inspection:</strong> Learn in detail all the diagnostic techniques and inspections required of critical components of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Testing:</strong> Understand thoroughly all the tests required for the various types of generators, exciters, AVR's and protective systems</li>
<li><strong>Electrical Generator Protective Systems:</strong> Gain a thorough understanding of all Electrical generator protective systems including: all electrical relays, tripping mechanisms, protective systems for negative phase sequence (unbalance loading), loss of excitation, over fluxing protection (over-voltage and underfrequency), reverse power (generator monitoring), over-speeding, pole slipping / out of step (sudden increase in torque or weakness in excitation), Class A protection, Class B protection</li>
<li><strong>Equipment Maintenance and Troubleshooting:</strong> Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Repair and Refurbishment:</strong> Gain a detailed understanding of the various methods used to repair and refurbish generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Rewind and Upgrade Options:</strong> Discover all options available to rewind and upgrade the generator rotor and stator to enhance the output and reduce downtime</li>
<li><strong>Efficiency, Reliability, and Longevity:</strong> Learn the various methods used to maximize the efficiency, reliability, and longevity of generators, exciters, AVR's and protective systems</li>
<li><strong>Advanced Methods to Prevent Failure:</strong> Gain a thorough understanding of all the methods used to prevent partial discharge, and other failures in generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Sizing:</strong> Gain a detailed understanding of all the calculations and sizing techniques used for generators, exciters, AVR's and protective systems</li>
<li><strong>Design Features:</strong> Understand all the design features that improve the efficiency, reliability of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Selection:</strong> Learn how to select generators, exciters, AVR's and protective systems by using the performance characteristics and selection criteria that you will learn in this course</li>
<li><strong>Equipment Enclosures and Sealing Methods:</strong> Learn about the various types of enclosures and sealing arrangements used for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Commissioning:</strong> Understand all the commissioning requirements for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Codes and Standards:</strong> Learn all the codes and standards applicable for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Causes and Modes of Failures:</strong> Understand causes and modes of failures of generators, exciters, AVR's and protective systems</li>
<li><strong>System Design:</strong> Learn all the requirements for designing different types of generators, exciters, AVR's and protective systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Generator Inspection, Testing, Maintenance, Protective Systems and Refurbishment Manual (this manual covers all the inspection and maintenance activities as well as all protective systems required for generators - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Electrical Generators, Excitation Systems and Governing Systems

<p style="color: rgb(28, 28, 28); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(28, 28, 28);">This course, worth 30 hours of verifiable CPD, will demonstrate your ability to grade and reflect upon your impression technique and demonstrate competence to take impressions unsupervised under prescription.</p><p style="color: rgb(28, 28, 28); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(28, 28, 28);"><img src="https://cavitytraining.co.uk/app/uploads/2023/11/cpdmember.png" alt="CPD member" width="162" height="149" srcset="https://cavitytraining.co.uk/app/uploads/2023/11/cpdmember.png 397w, https://cavitytraining.co.uk/app/uploads/2023/11/cpdmember-300x276.png 300w, https://cavitytraining.co.uk/app/uploads/2023/11/cpdmember-320x294.png 320w" sizes="(max-width: 162px) 100vw, 162px" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Learn about the Cavity Training Impression Taking Course</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The course is suited to nurses who aspire to treat patients directly and to take impressions or scan for impressions under the prescription of a registered dentist or clinical dental technician.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To enrol, you must be GDC-registered, work in surgery and hold indemnity insurance. (extended duties) You will need a GDC registered dental professional able and willing to supervise you.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">You also need to complete an Anaphylaxis Awareness course &ndash; we offer a free CPD course for this.</p><div fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Frequently Asked Questions</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">How long is the course?</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The course duration is 2 to 6 months.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">When are the classes held?</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">You will attend a live webinar class for two Saturday mornings.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Is there an exam at the end?</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">There is no exam at the end, you need to successfully complete 24 assessments with your practice mentor and a complete a 500 word dissertation.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">What qualifications do I need to start the course?</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Preferable English and Maths level 4 and above, you must also be GDC registered.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">What opportunities for progression is there?</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This qualification allows candidates to further progress onto various post registration qualifications or career opportunities, such as:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">The Certificates in Orthodontic Nursing</li><li fr-original-style="" style="box-sizing: border-box;">Extending a career in prosthetics.</li><li fr-original-style="" style="box-sizing: border-box;">Training as a Lab Technician</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><article style="color: rgb(28, 28, 28); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(28, 28, 28);"><article style="color: rgb(28, 28, 28); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(28, 28, 28);"><h3 style="color: var(--color-heading-text); box-sizing: border-box;" fr-original-style=" color: var(--color-heading-text);">Course Dates</h3><ul style="color: var(--color-body-text); box-sizing: border-box;" fr-original-style=" color: var(--color-body-text);"><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">13th - 27th April 2024</strong><br fr-original-style="" style="box-sizing: border-box;">9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">11th - 25th May 2024</strong><br fr-original-style="" style="box-sizing: border-box;">9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">8th - 22nd June 2024</strong><br fr-original-style="" style="box-sizing: border-box;">9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">13th - 27th July 2024</strong><br fr-original-style="" style="box-sizing: border-box;">9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">3rd - 17th August 2024</strong><br fr-original-style="" style="box-sizing: border-box;">9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">7th - 21st September 2024</strong><br fr-original-style="" style="box-sizing: border-box;">9:30am - 1:30pm</li></ul></article><article style="color: rgb(28, 28, 28); box-sizing: border-box;" fr-original-style=" color: rgb(28, 28, 28);"><h3 style="color: var(--color-heading-text); box-sizing: border-box;" fr-original-style=" color: var(--color-heading-text);">Costs</h3><p style="color: var(--color-body-text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: var(--color-body-text);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&pound;180.00 per person (inc. VAT)</strong></p><p style="color: var(--color-body-text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: var(--color-body-text);">Please choose from one of the course dates above. Each course is 2 days. The dates above indicate the 2 days of the course.</p></article></article><article style="color: rgb(28, 28, 28); box-sizing: border-box;" fr-original-style=" color: rgb(28, 28, 28);"><br fr-original-style="" style="box-sizing: border-box;"></article>

Cavity Dental Training

Advanced Certificate in Impression Taking including Intra Oral Scanning

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is designed for anyone seeking CCNA certification. The course also provides foundational knowledge for all support technicians involved in the basic installation, operation, and verification of Cisco networks. The job roles best suited to the material in this course are:<br />Entry-level network engineer<br />Network administrator<br />Network support technician<br />Help desk technician</p>Overview<p>This course will help you:<br />Learn the knowledge and skills to install, configure, and operate a small- to medium-sized network<br />Gain a foundation in the essentials of networking, security, and automation<br />Earn 30 CE credits toward recertification</p><p>The Implementing and Administering Cisco Solutions (CCNA) v2.0 course gives you a broad range of fundamental knowledge for all IT careers. Through a combination of lecture, hands-on labs, and self-study, you will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. This course helps you prepare to take the 200-301 CiscoÂ© Certified Network Associate (CCNAÂ©) exam. By passing this one exam, you earn the CCNA certification. This course also earns you 30 Continuing Education (CE) credits towards recertification.</p></div><div id="course-pills-2"><h4>Course Outline </h4><ul><li>Exploring the Functions of Networking ? Lecture</li><li>Introducing the Host-to-Host Communications Model ? Lecture</li><li>Operating Cisco IOS Software ? Lecture</li><li>Introducing LANs ? Lecture</li><li>Exploring the TCP/IP Link Layer ? Lecture</li><li>Starting a Switch ? Lecture</li><li>Introducing the TCP/IP Internet Layer, IPv4 Addressing, and Subnets ? Lecture</li><li>Explaining the TCP/IP Transport Layer and Application Layer ? Lecture</li><li>Exploring the Functions of Routing ? Lecture</li><li>Configuring a Cisco Router ? Lecture</li><li>Exploring the Packet Delivery Process ? Lecture</li><li>Troubleshooting a Simple Network ? Lecture</li><li>Introducing Basic IPv6 ? Lecture</li><li>Configuring Static Routing ? Lecture</li><li>Implementing VLANs and Trunks ? Lecture</li><li>Routing Between VLANs ? Lecture</li><li>Introducing OSPF ? Lecture</li><li>Building Redundant Switched Topologies ? Self-study</li><li>Improving Redundant Switched Topologies with EtherChannel ? Lecture</li><li>Exploring Layer 3 Redundancy ? Self-study</li><li>Introducing WAN Technologies ? Self-study</li><li>Explaining Basics of ACL ? Lecture</li><li>Enabling Internet Connectivity ? Lecture</li><li>Introducing QoS ? Self-study</li><li>Explaining Wireless Fundamentals ? Self-study</li><li>Introducing Architectures and Virtualization ? Self-study</li><li>Explaining the Evolution of Intelligent Networks ? Lecture</li><li>Introducing System Monitoring ? Lecture</li><li>Managing Cisco Devices ? Lecture</li><li>Examining the Security Threat Landscape ? Self-study</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Cisco Implementing and Administering Cisco Solutions v2.0 (CCNA) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Cisco Implementing and Administering Cisco Solutions v2.0 (CCNA) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Nexus Human

Cisco Certified Network Associate (CCNA)

Certified in Cybersecurity (CC)

Cisco Certified Network Professional certification (CCNP)

CompTIA Network+

Cisco Certified Entry Networking Technician (CCENT)

Cisco Certified Internetwork Expert (CCIE)

Cisco Implementing and Administering Cisco Solutions v2.0 (CCNA)

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is intended for entry-level computer support professionals with a basic knowledge of computer hardware, software, and operating systems who wish to increase their knowledge and understanding of networking concepts and acquire the required skills to prepare for a career in network support or administration, or who wish to prepare for the CompTIA Network+ certification. CompTIA Network+ is the first certification IT professionals specializing in network administration and support should earn. Network+ is aimed at IT professionals with job roles such as network administrator, network technician, network installer, help desk technician, and IT cable installer. This course is also designed for students who are seeking the CompTIA Network+ certification and who want to prepare for the CompTIA Network+ N10-008 Certification Exam.</p>Overview<p>In this course, you will describe the major networking technologies and systems of modern networks and configure, manage, and troubleshoot modern networks. Explain the OSI and TCP/IP Models. Explain properties of network traffic. Install and configure switched networks. Configure IP networks. Install and configure routed networks. Configure and monitor ports and protocols. Explain network application and storage issues. Monitor and troubleshoot networks. Explain network attacks and mitigations. Install and configure security devices. Explain authentication and access controls. Deploy and troubleshoot cabling solutions. Implement and troubleshoot wireless technologies. Compare and contrast WAN technologies. Use remote access methods. Identify site policies and best practices.</p><p>CompTIA's Network+ certification is a foundation-level certification designed for IT professionals with around one year of experience, whose job role is focused on network administration.<br /><br />The CompTIA Network+ exam will certify the successful candidate has the knowledge and skills required to troubleshoot, configure, and manage common network devices; establish basic network connectivity; understand and maintain network documentation; identify network limitations and weaknesses; and implement network security, standards, and protocols. The candidate will have a basic understanding of enterprise technologies, including cloud and virtualization technologies.  <br /><br /> The Official CompTIAÂ© Network+Â© (Exam N10-008): will teach you the fundamental principles of installing, configuring, and troubleshooting network technologies and help you to progress a career in network administration. In this course, you will build on your existing user-level knowledge and experience with personal computer operating systems and networks to master the fundamental skills and concepts that you will need to use on the job in any type of networking career.</p>Prerequisites<p></p><ul><li>CompTIA A+ Certification (Exams 220-1001 and 220-1002)</li></ul><p></p></div><div id="course-pills-2"><h3>1 - Explaining the OSI and TCP/IP Models</h3> <ul> <li>Topic A: Explain OSI Model Layers</li> <li> Topic B: Explain the TCP/IP Suite</li> </ul> <h3>2 - Explaining Properties of Network Traffic</h3> <ul> <li>Topic A: Explain Media Types and Access Methods</li> <li> Topic B: Deploy Ethernet Standards</li> <li> Topic C: Configure and Monitor Network Interfaces</li> </ul> <h3>3 - Installing and Configuring Switched Networks</h3> <ul> <li>Topic A: Install and Configure Hubs and Bridges</li> <li> Topic B: Install and Configure Switches</li> <li> Topic C: Compare and Contrast Network Topologies</li> <li> Topic D: Compare and Contrast Network Types</li> </ul> <h3>4 - Configuring IP Networks</h3> <ul> <li>Topic A: Configure IPv4 Addressing Components</li> <li> Topic B: Test IP Interfaces with Command Line Tools</li> <li> Topic C: Configure IPv4 Subnets</li> <li> Topic D: Configure Private and Public IPv4 Addressing Schemes</li> <li> Topic E: Configure IPv6 Addressing Components</li> <li> Topic F: Configure DHCP Services</li> </ul> <h3>5 - Installing and Configuring Routed Networks</h3> <ul> <li>Topic A: Explain Characteristics of Routing</li> <li> Topic B: Install and Configure Routers</li> </ul> <h3>6 - Configuring and Monitoring Ports and Protocols</h3> <ul> <li>Topic A: Explain the Uses of Ports and Protocols</li> <li> Topic B: Use Port Scanners and Protocol Analyzers</li> <li> Topic C: Explain the Use of Name Resolution Services</li> <li> Topic D: Configure DNS and IPAM Services</li> </ul> <h3>7 - Explaining Network Application and Storage Services</h3> <ul> <li>Topic A: Explain the Uses of Network Applications</li> <li> Topic B: Explain the Uses of Voice Services and Advanced Networking Devices</li> <li> Topic C: Explain the Uses of Virtualization and Network Storage Services</li> <li> Topic D: Summarize the Concepts of Cloud Services</li> </ul> <h3>8 - Monitoring and Troubleshooting Networks</h3> <ul> <li>Topic A: Monitor Network Interfaces and Logs</li> <li>Topic B: Explain Network Troubleshooting Methodology</li> <li>Topic C: Troubleshoot Common Network Services Issues</li> </ul> <h3>9 - Explaining Networking Attacks and Mitigations</h3> <ul> <li>Topic A: Summarize Common Networking Attacks</li> <li>Topic B: Explain the Characteristics of VLANs</li> <li>Topic C: Explain the Characteristics of NAT and Port Forwarding</li> </ul> <h3>10 - Installing and Configuring Security Devices</h3> <ul> <li>Topic A: Install and Configure Firewalls and Proxies</li> <li>Topic B: Explain the Uses of IDS/IPS and UTM</li> </ul> <h3>11 - Explaining Authentication and Access Controls</h3> <ul> <li>Topic A: Explain Authentication Controls and Attacks</li> <li>Topic B: Explain the Uses of Authentication Protocols and Directory Services</li> <li>Topic C: Explain the Uses of Port Security and NAC</li> <li>Topic D: Implement Network Device Hardening</li> <li>Topic E: Explain Patch Management and Vulnerability Scanning Processes</li> </ul> <h3>12 - Deploying and Troubleshooting Cabling Solutions</h3> <ul> <li>Topic A: Deploy Structured Cabling Systems</li> <li>Topic B: Deploy Twisted Pair Cabling Solutions</li> <li>Topic C: Test and Troubleshoot Twisted Pair Cabling Solutions</li> <li>Topic D: Deploy Fiber Optic Cabling Solutions</li> </ul> <h3>13 - Implementing and Troubleshooting Wireless Technologies</h3> <ul> <li>Topic A: Install and Configure Wireless Technologies</li> <li>Topic B: Troubleshoot Wireless Performance Issues</li> <li>Topic C: Secure and Troubleshoot Wireless Connectivity</li> </ul> <h3>14 - Comparing and Contrasting WAN Technologies</h3> <ul> <li>Topic A: Compare and Contrast WAN Core Service Types</li> <li>Topic B: Compare and Contrast WAN Subscriber Service Types</li> <li>Topic C: Compare and Contrast WAN Framing Service Types</li> <li>Topic D: Compae and Contrast Wireless and IoT WAN Technologies</li> </ul> <h3>15 - Using Remote Access Methods</h3> <ul> <li>Topic A: Use Remote Access VPNs</li> <li>Topic B: Use Remote Access Management Methods</li> </ul> <h3>16 - Identifying Site Policies and Best Practices</h3> <ul> <li>Topic A: Manage Networks with Documentation and Diagrams</li> <li>Topic B: Summarize the Purposes of Physical Security Devices</li> <li>Topic C: Compare and Contrast Business Continuity and Disaster Recovery Concepts</li> <li>Topic D: Identify Policies and Best Practices</li> </ul></div>

IT Networking Fundamentals

CompTIA A+

Computer Networking

CompTIA Security+

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is intended for existing IT professionals who have some networking knowledge and experience and are looking for a single course that provides insight into core and advanced networking technologies in Windows Server. This audience would typically include: Network administrators who are looking to reinforce existing skills and learn about new networking technology changes and functionality in Windows Server. System or Infrastructure Administrators with general networking knowledge who are looking to gain core and advanced networking knowledge and skills on Windows Server.</p>Overview<p>Plan and implement an IPv4 network. Implement Dynamic Host Configuration Protocol (DHCP). Implement IPv6. Implement Domain Name System (DNS). Implement and manage IP address management (IPAM). Plan for remote access. Implement DirectAccess. Implement virtual private networks (VPNs). Implement networking for branch offices. Configure advanced networking features. Implement Software Defined Networking.</p><p>55343A is the Community Courseware equivalent of retired Legacy Course 20741BC - Networking with Windows Server 2016. This 5-day classroom-based course provides the fundamental networking skills required to deploy and support Windows Server in most organizations. It covers IP fundamentals, remote access technologies, and more advanced content including Software Defined Networking. Although this course and the associated labs are written for Windows Server 2022, the skills taught will also be backwards compatible for Server 2016 and Server 2019.</p>Prerequisites<p>In addition to professional experience, students who attend this training should already have the following technical knowledge:  </p><li>Experience working with Windows Server  </li><li>Knowledge of the Open Systems Interconnection (OSI) model  </li><li>Understanding of core networking infrastructure components and technologies such as cabling, routers and switches  </li><li>Familiarity with networking topologies and architectures such as local area networks (LANs), wide area networks (WANs) and wireless networking  </li><li>Some basic knowledge of the TCP/IP protocol stack, addressing and name resolution  </li><li>Experience with and knowledge of virtualization  </li><li>Hands-on experience working with the Windows client operating systems such as Windows 10 or Windows 11<p></p></li></div><div id="course-pills-2"><h3>1 - Planning and implementing an IPv4 network</h3> <ul> <li>Planning IPv4 addressing</li> <li>Configuring an IPv4 host</li> <li>Managing and troubleshooting IPv4 network connectivity</li> </ul> <h3>2 - Implementing DHCP</h3> <ul> <li>Overview of the DHCP server role</li> <li>Deploying DHCP</li> <li>Managing and troubleshooting DHCP</li> </ul> <h3>3 - Implementing IPv6</h3> <ul> <li>Overview of IPv6 addressing</li> <li>Configuring an IPv6 host</li> <li>Implementing IPv6 and IPv4 coexistence</li> <li>Transitioning from IPv4 to IPv6</li> </ul> <h3>4 - Implementing DNS</h3> <ul> <li>Implementing DNS servers</li> <li>Configuring zones in DNS</li> <li>Configuring name resolution between DNS zones</li> <li>Configuring DNS integration with Active Directory Domain Services (AD DS)</li> <li>Configuring advanced DNS settings</li> </ul> <h3>5 - Implementing and managing IPAM</h3> <ul> <li>Overview of IPAM</li> <li>Deploying IPAM</li> <li>Managing IP address spaces by using IPAM</li> </ul> <h3>6 - Remote access in Windows Server</h3> <ul> <li>Overview of remote access</li> <li>Implementing the Web Application Proxy</li> </ul> <h3>7 - Implementing DirectAccess</h3> <ul> <li>Overview of DirectAccess</li> <li>Implementing DirectAccess by using the Getting Started Wizard</li> <li>Implementing and managing an advanced DirectAccess infrastructure</li> </ul> <h3>8 - Implementing VPNs</h3> <ul> <li>Planning VPNs</li> <li>Implementing VPNs</li> </ul> <h3>9 - Implementing networking for branch offices</h3> <ul> <li>Networking features and considerations for branch offices</li> <li>Implementing Distributed File System (DFS) for branch offices</li> <li>Implementing BranchCache for branch offices</li> </ul> <h3>10 - Configuring advanced networking features</h3> <ul> <li>Overview of high performance networking features</li> <li>Configuring advanced Microsoft Hyper-V networking features</li> </ul> <h3>11 - Implementing Software Defined Networking</h3> <ul> <li>Overview of SDN.</li> <li>Implementing network virtualization</li> <li>Implementing Network Controller</li> </ul></div>

Microsoft Certification

Networking Skills

55343 Networking with Windows Server

This immunisation update is aimed at health professionals working in an Occupational Health capacity.
AIMS AND OBJECTIVES 
• To understand the role and importance of Immunisation and vaccination 
• To be able to explain the aims of immunisation, describe national policy and schedules and deal with variations to the schedule 
• To understand the legal framework of Immunisation 
• To understand the legal aspects of supply and administration of vaccines 

COURSE CONTENTS 
This course provides a comprehensive update in the following immunisations / vaccinations: 
• Dip / Tet / Pertusis / Polio 
• MMR 
• Hepatitis A 
• Hepatitis B 
• TB 
• BCG (screening and testing) Mantoux 
• Influenza update 
• Anaphylaxis 
Plus: 
• The legal frameworks of immunisation update and vaccinations 
• PGD’s and PSD’s 
• Technique / practical if needed 
• Administration 
• Capacity and Consent 
• Record-keeping and reporting 
• Strategies: improving immunisation rates 
• Cold chain 
• Documentation 
• Contraindications 
• Current Issues in Immunisation 

WHO SHOULD ATTEND? 
• Occupational Health Staff, including Technicians and Nurses 
Includes All course materials and certificate of attendance
Accreditation 6 CPD points awarded on completion. Accredited by Aim Qualifications (*Certificate £30) and CPD Standards (*Certificate free)



AB Health Group

Anaphylaxis

Immunisation & Vaccination

Immunisation

Health & Wellbeing

General Health

Medical Training

Vaccination

Professional Development

Public Health

Occupational Health Immunisation Update - Webinar

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is targeted to those seeking A+ Certification and anyone in these roles:<br />IT Support Specialist<br />Helpdesk Technician<br />Field Technician<br />Tier I Support Specialist<br />Desktop Support Specialist<br />Associate Network Engineer<br />Systems Support Technician<br />Junior Systems Administrator</p>Overview<p>At completion of this course, you will be able to:<br />Install and configure end-user devices and software<br />Address connectivity problems<br />Perform basic cybersecurity mitigations<br />Troubleshoot common problems to diagnose and resolve issues<br />Demonstrate basic knowledge of scripting, the cloud, and virtualization</p><p>CompTIA A+ certified professionals are proven problem solvers. They support today?s core technologies from security to networking to virtualization and more. CompTIA A+ is the industry standard for launching IT careers into today?s digital world. This course, prepares you for the CompTIA A+ Certification exams 220-1101 and 220-1102.<br /></p></div><div id="course-pills-2"><h4>Lesson 1: Installing Motherboards and Connectors</h4><ul><li>Topic 1A: Explain Cable Types and Connectors</li><li>Topic 1B: Install and Configure Motherboards</li><li>Topic 1C: Explain Legacy Cable Types</li></ul><h4>Lesson 2: Installing System Devices</h4><ul><li>Topic 2A: Install and Configure Power Supplies and Cooling</li><li>Topic 2B: Select and Install Storage Devices</li><li>Topic 2C: Install and Configure System Memory</li><li>Topic 2D: Install and Configure CPUs</li></ul><h4>Lesson 3: Troubleshooting PC Hardware</h4><ul><li>Topic 3A: Apply Troubleshooting Methodology</li><li>Topic 3B: Configure BIOS/UEFI</li><li>Topic 3C: Troubleshoot Power and Disk Issues</li><li>Topic 3D: Troubleshoot System and Display Issues</li></ul><h4>Lesson 4: Comparing Local Networking Hardware</h4><ul><li>Topic 4A: Compare Network Types</li><li>Topic 4B: Compare Networking Hardware</li><li>Topic 4C: Explain Network Cable Types</li><li>Topic 4D: Compare Wireless Networking Types</li></ul><h4>Lesson 5: Configuring Network Addressing and Internet Connections</h4><ul><li>Topic 5A: Compare Internet Connection Types</li><li>Topic 5B: Use Basic TCP/IP Concepts</li><li>Topic 5C: Compare Protocols and Ports</li><li>Topic 5D: Compare Network Configuration Concepts</li></ul><h4>Lesson 6: Supporting Network Services</h4><ul><li>Topic 6A: Summarize Services Provided by Networked Hosts</li><li>Topic 6B: Compare Internet and Embedded Appliances</li><li>Topic 6C: Troubleshoot Networks</li></ul><h4>Lesson 7: Summarizing Virtualization and Cloud Concepts</h4><ul><li>Topic 7A: Summarize Client-Side Virtualization</li><li>Topic 7B: Summarize Cloud Concepts</li></ul><h4>Lesson 8: Supporting Mobile Devices</h4><ul><li>Topic 8A: Set Up Mobile Devices and Peripherals</li><li>Topic 8B: Configure Mobile Device Apps</li><li>Topic 8C: Install and Configure Laptop Hardware</li><li>Topic 8D: Troubleshoot Mobile Device Issues</li></ul><h4>Lesson 9: Supporting Print Devices</h4><ul><li>Topic 9A: Deploy Printer and Multifunction Devices</li><li>Topic 9B: Replace Print Device Consumables</li><li>Topic 9C: Troubleshoot Print Device Issues</li></ul><h4>Lesson 10: Configuring Windows</h4><ul><li>Topic 10A: Configure Windows User Settings</li><li>Topic 10B: Configure Windows System Settings</li></ul><h4>Lesson 11: Managing Windows</h4><ul><li>Topic 11A: Use Management Consoles</li><li>Topic 11B: Use Performance and Troubleshooting Tools</li><li>Topic 11C: Use Command-line Tools</li></ul><h4>Lesson 12: Identifying OS Types and Features</h4><ul><li>Topic 12A: Explain OS Types</li><li>Topic 12B: Compare Windows Editions</li></ul><h4>Lesson 13: Supporting Windows</h4><ul><li>Topic 13A: Perform OS Installations and Upgrades</li><li>Topic 13B: Install and Configure Applications</li><li>Topic 13C: Troubleshoot Windows OS Problems</li></ul><h4>Lesson 14: Managing Windows Networking</h4><ul><li>Topic 14A: Manage Windows Networking</li><li>Topic 14B: Troubleshoot Windows Networking</li><li>Topic 14C: Configure Windows Security Settings</li><li>Topic 14D: Manage Windows Shares</li></ul><h4>Lesson 15: Managing Linux and macOS</h4><ul><li>Topic 15A: Identify Features of Linux</li><li>Topic 15B: Identify Features of macOS</li></ul><h4>Lesson 16: Configuring SOHO Network Security</h4><ul><li>Topic 16A: Explain Attacks, Threats, and Vulnerabilities</li><li>Topic 16B: Compare Wireless Security Protocols</li><li>Topic 16C: Configure SOHO Router Security</li><li>Topic 16D: Summarize Security Measures</li></ul><h4>Lesson 17: Managing Security Settings</h4><ul><li>Topic 17A: Configure Workstation Security</li><li>Topic 17B: Configure Browser Security</li><li>Topic 17C: Troubleshoot Workstation Security Issues</li></ul><h4>Lesson 18: Supporting Mobile Software</h4><ul><li>Topic 18A: Configure Mobile OS Security</li><li>Topic 18B: Troubleshoot Mobile OS and App Software</li><li>Topic 18C: Troubleshoot Mobile OS and App Security</li></ul><h4>Lesson 19: Using Support and Scripting Tools</h4><ul><li>Topic 19A: Use Remote Access Technologies</li><li>Topic 19B: Implement Backup and Recovery</li><li>Topic 19C: Explain Data Handling Best Practices</li><li>Topic 19D: Identify Basics of Scripting</li></ul><h4>Lesson 20: Implementing Operational Procedures</h4><ul><li>Topic 20A: Implement Best Practice Documentation</li><li>Topic 20B: Use Proper Communication Techniques</li><li>Topic 20C: Use Common Safety and Environmental Procedures</li></ul></div>

IT Certifications

CompTIA A+ Certification (Exams 220-1101 and 220-1102)

<p>Give a compliment to your career and take it to the next level. This<strong> Pharmacy Assistant &amp; Pharmacy Technician </strong>bundle will provide you with the essential knowledge to shine in your professional career. Whether you want to develop skills for your next job or elevate your skills for your next promotion, this Pharmacy Assistant &amp; Pharmacy Technician bundle will help you stay ahead of the pack.</p><p>Throughout the Pharmacy Assistant &amp; Pharmacy Technician programme, it stresses how to improve your competency as a person in your chosen field while also outlining essential career insights in the relevant job sector.</p><p>Along with this course, you will get <strong>10 premium courses, an original</strong><strong>hardcopy</strong>, <strong>11 PDF certificates (Main Course + Additional Courses) </strong>Student ID card as gifts.</p><p><strong>This Pharmacy Assistant &amp; Pharmacy Technician Bundle Consists of the following Premium courses: </strong></p><ul><li><strong>Course 01: </strong>Pharmacy Assistant &amp; Pharmacy Technician</li><li><strong>Course 02: </strong>Pharmacy Skills Training Level 4</li><li><strong>Course 03: </strong>Medication Administration Level 4</li><li><strong>Course 04: </strong>Control and Administration of Medicines Online Training Course</li><li><strong>Course 05: </strong>Medical Transcription</li><li><strong>Course 06: </strong>IsiXhosa for Healthcare: The Pharmacist</li><li><strong>Course 07: </strong>Nurse Prescribing Diploma</li><li><strong>Course 08: </strong>Immunisation Nurse</li><li><strong>Course 09: </strong>Pharmacology</li><li><strong>Course 10: </strong>Diabetes Care Diploma</li><li><strong>Course 11: </strong>GDPR in Healthcare</li><li><strong>Course 12: </strong>Level 2 Microsoft Office Essentials</li><li><strong>Course 13: </strong>Personal Hygiene</li><li><strong>Course 14: </strong>Effective Communication Skills Diploma</li></ul><p>Enrol now in Pharmacy Assistant &amp; Pharmacy Technician to advance your career, and use the premium study materials from Apex Learning.</p><p>The bundle incorporates basic to advanced level skills to shed some light on your way and boost your career. Hence, you can strengthen your Pharmacy Assistant &amp; Pharmacy Technician expertise and essential knowledge, which will assist you in reaching your goal. Moreover, you can learn from any place in your own time without travelling for classes.</p><p><strong>Course Curriculum :</strong></p><p><strong>Course 01: Pharmacy Assistant &amp; Pharmacy Technician</strong></p><ul><li>Module 1: Introduction</li><li>Module 2: Job Role</li><li>Module 3: Patient Counselling Guide</li><li>Module 4: Communication</li><li>Module 5: The Pharmacy Team and Practices</li><li>Module 6: Prescription and Dispensing in Pharmacies</li><li>Module 7: Dispensing Methods, EPS, Minimising Dispensing Errors in Pharmacies</li><li>Module 8: Inventory Control and Management in Pharmacies</li><li>Module 9: Standard Operating Procedures (SOPs)</li><li>Module 10: Health and Safety Risks Assessment and Pharmaceutical Terminology</li></ul><p><strong>Certificate:</strong></p><ul><li><strong>PDF Certificate: Free (Previously it was £6*11 = £66)</strong></li><li><strong>Hard Copy Certificate: Free (For The Title Course: Previously it was £10)</strong></li></ul><h2>
        
        <div>CPD</div>
    </h2>

                        <div id="cpd">
                            <div>
                                <div>
                                    <div>
                                        150 CPD hours / points
                                    </div>
                                        <div>
                                            Accredited by CPD Quality Standards
                                        </div>
                                </div>
                            </div>
                        </div><h2>
        
        <div>Who is this course for?</div>
    </h2>

                        <div id="who_is_this_course_for">
                            <p>Anyone from any background can enrol in this Pharmacy Assistant &amp; Pharmacy Technician bundle.</p>
                        </div><h2>
        
        <div>Requirements</div>
    </h2>

                        <div id="requirements">
                            <p>This Pharmacy Assistant &amp; Pharmacy Technician course has been designed to be fully compatible with tablets and smartphones.</p>
                        </div><h2>
        
        <div>Career path</div>
    </h2>

                        <div id="career_path">
                            <p>Having this expertise will increase the value of your CV and open you up to multiple job sectors.</p>
                        </div><h2>
        
        <div>Certificates</div>
    </h2>

                        <div id="optional_extras">
                                    <h4>Certificate of completion</h4>
        <p>
            Digital certificate -
            Included
        </p>

                        </div>

Overview:
Give a compliment to your career and take it to the next level. This Pharmacy Assistant & Pharmacy Technician bundle will provide you with the essential knowledge to shine in your professional career. Whether you want to develop skills for your next job or elevate your skills for your next promotion, this Pharmacy Assistant & Pharmacy Technician bundle will help you stay ahead of the pack.
Throughout the Pharmacy Assistant & Pharmacy Technician programme, it stresses how to improve your competency as a person in your chosen field while also outlining essential career insights in the relevant job sector.
Along with this course, you will get 10 premium courses, an original hardcopy, 11 PDF certificates (Main Course + Additional Courses) Student ID card as gifts.
This Pharmacy Assistant & Pharmacy Technician Bundle Consists of the following Premium courses: 
Course 01: Pharmacy Assistant & Pharmacy Technician
Course 02: Pharmacy Dispenser
Course 03: Control and Administration of Medication Diploma Level 3
Course 04: Safety & Precautions in Medication Management
Course 05: Infection Control & Medicine Handling
Course 06: Safe Handling of Medicines
Course 07: Nurse Prescribing Diploma
Course 08: Medication Training
Course 09: Diploma in Alternative Medicine Training
Course 10: Medical Secretary Diploma
Course 11: Paramedicine Study
Course 12: Biomedical Science
Course 13: Laboratory Technician
Course 14: Sports Medicine Fundamentals
Course 15: Food as Medicine
Course 16: Medical Law
Course 17: Introduction to Medical Terminology
Course 18: Medical Writing
Course 19: Medical Transcription: Audio Typist
Course 20: Certificate in Risk Assessment and Health Care at QLS Level 3
Enrol now in Pharmacy Assistant & Pharmacy Technician to advance your career, and use the premium study materials from Apex Learning.



Description:
The Pharmacy Assistant & Pharmacy Technician bundle incorporates basic to advanced level skills to shed some light on your way and boost your career. Hence, you can strengthen your Pharmacy Assistant & Pharmacy Technician expertise and essential knowledge, which will assist you in reaching your goal. Moreover, you can learn from any place in your own time without travelling for classes.
★★★ Course Curriculum of Pharmacy Assistant & Pharmacy Technician Bundle ★★★
Course 01: Pharmacy Assistant & Pharmacy Technician
Module 01: Introduction
Module 02: Job Role
Module 03: Patient Counselling Guide
Module 04: Communication
Module 05: The Pharmacy Team and Practices
Module 06: Prescription and Dispensing in Pharmacies
Module 07: Dispensing Methods, EPS, Minimising Dispensing Errors in Pharmacies
Module 08: Inventory Control and Management in Pharmacies
Module 09: Standard Operating Procedures (SOPs)
Module 10: Health and Safety Risks Assessment and Pharmaceutical Terminology
---------- And 10 More Courses ----------
How will I get my Pharmacy Assistant & Pharmacy Technician Certificate?
After successfully completing the Pharmacy Assistant & Pharmacy Technician course, you will be able to order your CPD Accredited Certificates (PDF + Hard Copy) as proof of your achievement.
PDF Certificate: Free (Previously it was £9.99*20= £199)
Hard Copy Certificate: Free (For The Title Course: Previously it was £14.99)
So, enrol now in this Pharmacy Assistant & Pharmacy Technician Bundle to kickstart your career!



Who is this course for? 
Anyone from any background can enrol in this Pharmacy Assistant & Pharmacy Technician bundle.



Requirements 
This Pharmacy Assistant & Pharmacy Technician course has been designed to be fully compatible with tablets and smartphones.



Career path 
Having this expertise will increase the value of your CV and open you up to multiple job sectors.



Certificates 
Digital certificate - Included
Hardcopy certificate - Included 

Apex Learning

Pharmacy Assistant

Pharmacy Technician

Pharmacy

Pharmacist

Pharmacy Assistant & Pharmacy Technician Training

This Offer is vaild for first 10 Learners Only!!

Limited Time Offer!

<div id="menu0">
									<div>
			<div>
				<div>
							<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
			<h2>Overview of Lab Technician</h2>		</div>
				</div>
				<div>
				<div>
					<div><p><span>Join our Lab Technician course and discover your hidden skills, setting you on a path to success in this area. Get ready to improve your skills and achieve your biggest goals. The Lab Technician course has everything you need to get a great start in this sector.</span></p><p><span>Improving and moving forward is key to getting ahead personally. The Lab Technician course is designed to teach you the important stuff quickly and well, helping you to get off to a great start in the field. So, what are you looking for? Enrol now!</span></p></div>
				</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>
				<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
			<h3>Get a Quick Look at The Course Content:</h3>		</div>
				</div>
				<div>
				<div>
					<div>
							
					<div></div>
										<div></div>
														
							
					<div></div>
										<div></div>
														
							
					<div></div>
										<div></div>
														
							
					<div></div>
										<div></div>
														
					</div>
			</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>
				<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
			<h3>This <span>Lab Technician</span> Course will help you to learn:</h3>		</div>
				</div>
				<div>
				<div>
					<ul>
							<li>
											<span>
							<i></i>						</span>
										<span>Learn strategies to boost your workplace efficiency.</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>Hone your skills to help you advance your career.</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>Acquire a comprehensive understanding of various topics and tips.</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>Learn in-demand skills that are in high demand among UK employers</span>
									</li>
						</ul>
				</div>
				</div>
				<div>
				<div>
					<div><p><span>This course covers the topic you must know to stand against the tough competition. The future is truly yours to seize with this Lab Technician. Enrol today and complete the course to achieve a certificate that can change your career forever.</span></p></div>
				</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>
				<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
			<h2>Details</h2>		</div>
				</div>
				<div>
				<div>
			<h3>Perks of Learning with IOMH</h3>		</div>
				</div>
				<div>
				<div>
					<ul>
							<li>
											<span>
							<i></i>						</span>
										<span>One-To-One Support from a Dedicated Tutor Throughout Your Course.</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>Study Online - Whenever and Wherever You Want.</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>Instant Digital/ PDF Certificate.</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>100% Money Back Guarantee.</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>12 Months Access.</span>
									</li>
						</ul>
				</div>
				</div>
				<div>
				<div>
			<h3>Process of Evaluation</h3>		</div>
				</div>
				<div>
				<div>
					<div><p>After studying the course, an MCQ exam or assignment will test your skills and knowledge. You have to get a score of 60% to pass the test and get your certificate.</p></div>
				</div>
				</div>
				<div>
				<div>
			<h3>Certificate of Achievement</h3>		</div>
				</div>
				<div>
				<div>
					<div><h4><span>Certificate of Completion - Digital / PDF Certificate</span></h4>  
<p>After completing the <span>Lab Technician course</span>, you can order your<span> CPD Accredited Digital / PDF Certificate for £5.99. </span></p>
<p><span>Certificate of Completion - Hard copy Certificate</span></p>
<p><span>You can get the CPD Accredited <b><i>Hard Copy Certificate for £12.99</i></b>.</span></p>
<div><span> </span></div>
<div><span>Shipping Charges:</span><span><span><br /></span></span></div>
<ul>
<li><p><span>Inside the UK: £3.99</span></p></li>
<li><p><span>International: £10.99</span></p></li>
</ul></div>
				</div>
				</div>
				<div>
				<div>
			<h3>Who Is This Course for?</h3>		</div>
				</div>
				<div>
				<div>
					<div><p><span>This Lab Technician is suitable for anyone aspiring to start a career in relevant field; even if you are new to this and have no prior knowledge, this course is going to be very easy for you to understand. </span></p><p><span>On the other hand, if you are already working in this sector, this course will be a great source of knowledge for you to improve your existing skills and take them to the next level. </span></p><p><span>This course has been developed with maximum flexibility and accessibility, making it ideal for people who don't have the time to devote to traditional education.</span></p></div>
				</div>
				</div>
				<div>
				<div>
			<h3>Requirements</h3>		</div>
				</div>
				<div>
				<div>
					<div><p><span>You don't need any educational qualification or experience to enrol in the Lab Technician course.</span></p>
<p><span>Do note: you must be at least 16 years old to enrol.</span></p>
<p><span>Any internet-connected device, such as a computer, tablet, or smartphone, can access this online course.</span></p></div>
				</div>
				</div>
				<div>
				<div>
			<h3>Career Path</h3>		</div>
				</div>
				<div>
				<div>
					<div><p><span>The certification and skills you get from this </span><span>Lab Technician Course</span><span> can help you advance your career and gain expertise in several fields, allowing you to apply for high-paying jobs in related sectors.</span></p></div>
				</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>
				<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
			<h2><u>Frequently Asked Questions (FAQ's)</u></h2>		</div>
				</div>
				<div>
				<div>
					<div>
							<div>
					<div id="elementor-tab-title-7431">
													<span>
															<span><i></i></span>
								<span><i></i></span>
														</span>
												Q. How do I purchase a course?
					</div>
					<div id="elementor-tab-content-7431"><p>1.  You need to find the right course on our IOMH website at first. You can search for any course or find the course from the Courses section of our website.<br />2. Click on Take This Course button, and you will be directed to the Cart page.<br />3. You can update the course quantity and also remove any unwanted items in the CART and after that click on the Checkout option and enter your billing details.<br />4. Once the payment is made, you will receive an email with the login credentials, and you can start learning after logging into the portal.</p></div>
				</div>
							<div>
					<div id="elementor-tab-title-7432">
													<span>
															<span><i></i></span>
								<span><i></i></span>
														</span>
												Q. I have purchased the course when will I be able to access the materials?
					</div>
					<div id="elementor-tab-content-7432"><p>After purchasing the course, you should receive an email with the login credentials within 24 hours. Please check your spam or junk folder if you didn't receive it in your inbox. You can access your courses by logging into your account. If you still need any assistance, please get in touch with our Customer Support team by providing the details of your purchase.</p></div>
				</div>
							<div>
					<div id="elementor-tab-title-7433">
													<span>
															<span><i></i></span>
								<span><i></i></span>
														</span>
												Q. I haven't received my certificate yet. What should I do?
					</div>
					<div id="elementor-tab-content-7433"><p>You should receive your Digital Certificate within 24 hours after placing the order, and it will take 3-9 days to deliver the hard copies to your address if you are in the UK.</p><p>For International Delivery, it will take 20-25 days.</p><p>If you require any assistance, get in touch with our dedicated Customer Support team, and your queries/issues will be dealt with accordingly.</p></div>
				</div>
							<div>
					<div id="elementor-tab-title-7434">
													<span>
															<span><i></i></span>
								<span><i></i></span>
														</span>
												Q. I don't have a credit/debit card, what other methods of payment do you accept?
					</div>
					<div id="elementor-tab-content-7434"><p>You can make the payment using PayPal or you can Bank Transfer the amount.</p><p>For Bank transfer you will require an invoice from us and you need to contact our Customer Support team and provide details of your purchase to get the invoice.</p><p>After that, you will receive an email with the invoice and bank details and you can make the payment accordingly.</p></div>
				</div>
							<div>
					<div id="elementor-tab-title-7435">
													<span>
															<span><i></i></span>
								<span><i></i></span>
														</span>
												Q. Can I do the courses from outside UK?
					</div>
					<div id="elementor-tab-content-7435"><p>We are an online course provider, and learners from anywhere in the world can enrol on our courses using an internet-connected device.</p></div>
				</div>
							<div>
					<div id="elementor-tab-title-7436">
													<span>
															<span><i></i></span>
								<span><i></i></span>
														</span>
												Q. When I log into the account it says 'Contact Administrator'.
					</div>
					<div id="elementor-tab-content-7436"><p>To resolve this issue, please log out of your account and then log back in.</p></div>
				</div>
					</div>
				</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>
						</div>
			</div>
		</div>
								</div>
						<div id="menu1">
							<div>
											<div>
				<h3>
	<span>Course Curriculum</span>
</h3>

<div>
<table>				<tbody><tr>
					<td colspan="4">Module 01: Introduction to the Course	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 01: Introduction to the Course</td>
					<td> </td>
					<td><span><i></i> 00:14:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 02: Medical Laboratory Services	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 02: Medical Laboratory Services</td>
					<td> </td>
					<td><span><i></i> 00:21:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 03: Laboratory Equipments (Part-01)	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 03: Laboratory Equipments (Part-01)</td>
					<td> </td>
					<td><span><i></i> 00:26:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 04: Laboratory Equipments (Part-02)	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 04: Laboratory Equipments (Part-02)</td>
					<td> </td>
					<td><span><i></i> 00:15:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 05: Microscope and How to Use It	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 05: Microscope and How to Use It</td>
					<td> </td>
					<td><span><i></i> 00:17:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 06: Solutions Used in Clinical/Medical Laboratory	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 06: Solutions Used in Clinical/Medical Laboratory</td>
					<td> </td>
					<td><span><i></i> 00:17:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 07: Sterilisation, Disinfection and Decontamination	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 07: Sterilisation, Disinfection and Decontamination</td>
					<td> </td>
					<td><span><i></i> 00:18:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 08: Basic Haematology	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 08: Basic Haematology</td>
					<td> </td>
					<td><span><i></i> 00:50:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 09: Basic Haemostasis (Coagulation)	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 09: Basic Haemostasis (Coagulation)</td>
					<td> </td>
					<td><span><i></i> 00:30:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 10: Basic Immunology and Immunohematology	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 10: Basic Immunology and Immunohematology</td>
					<td> </td>
					<td><span><i></i> 00:38:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 11: Urinalysis	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 11: Urinalysis</td>
					<td> </td>
					<td><span><i></i> 00:35:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 12: Basic Clinical Chemistry	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 12: Basic Clinical Chemistry</td>
					<td> </td>
					<td><span><i></i> 00:39:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 13: Basic Clinical Microbiology	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 13: Basic Clinical Microbiology</td>
					<td> </td>
					<td><span><i></i> 00:26:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 14: Basic Parasitology	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 14: Basic Parasitology</td>
					<td> </td>
					<td><span><i></i> 00:29:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 15: Laboratory Accidents and Safety	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 15: Laboratory Accidents and Safety</td>
					<td> </td>
					<td><span><i></i> 00:18:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 16: Quality Assurance	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Module 16: Quality Assurance</td>
					<td> </td>
					<td><span><i></i> 00:20:00</span></td>
				</tr>
				</tbody></table></div>

			</div>
									</div>
						</div>
						<div id="menu2">
							
						</div>

Overview of Lab Technician
Join our Lab Technician course and discover your hidden skills, setting you on a path to success in this area. Get ready to improve your skills and achieve your biggest goals. The Lab Technician course has everything you need to get a great start in this sector.
Improving and moving forward is key to getting ahead personally. The Lab Technician course is designed to teach you the important stuff quickly and well, helping you to get off to a great start in the field. So, what are you looking for? Enrol now!
Get a Quick Look at The Course Content:
This Lab Technician Course will help you to learn:
Learn strategies to boost your workplace efficiency.
Hone your skills to help you advance your career.
Acquire a comprehensive understanding of various topics and tips.
Learn in-demand skills that are in high demand among UK employers
This course covers the topic you must know to stand against the tough competition. The future is truly yours to seize with this Lab Technician. Enrol today and complete the course to achieve a certificate that can change your career forever.
Details
Perks of Learning with IOMH
One-To-One Support from a Dedicated Tutor Throughout Your Course.
Study Online - Whenever and Wherever You Want.
Instant Digital/ PDF Certificate.
100% Money Back Guarantee.
12 Months Access.
Process of Evaluation
After studying the course, an MCQ exam or assignment will test your skills and knowledge. You have to get a score of 60% to pass the test and get your certificate.
Certificate of Achievement
Certificate of Completion - Digital / PDF Certificate
After completing the Lab Technician course, you can order your CPD Accredited Digital / PDF Certificate for £5.99. 
Certificate of Completion - Hard copy Certificate
You can get the CPD Accredited Hard Copy Certificate for £12.99.
Shipping Charges:
Inside the UK: £3.99
International: £10.99
Who Is This Course for?
This Lab Technician is suitable for anyone aspiring to start a career in relevant field; even if you are new to this and have no prior knowledge, this course is going to be very easy for you to understand. 
On the other hand, if you are already working in this sector, this course will be a great source of knowledge for you to improve your existing skills and take them to the next level. 
This course has been developed with maximum flexibility and accessibility, making it ideal for people who don't have the time to devote to traditional education.
Requirements
You don't need any educational qualification or experience to enrol in the Lab Technician course.
Do note: you must be at least 16 years old to enrol.
Any internet-connected device, such as a computer, tablet, or smartphone, can access this online course.
Career Path
The certification and skills you get from this Lab Technician Course can help you advance your career and gain expertise in several fields, allowing you to apply for high-paying jobs in related sectors.

 Course Curriculum

Module 01: Introduction to the Course			
	Module 01: Introduction to the Course		00:14:00
Module 02: Medical Laboratory Services			
	Module 02: Medical Laboratory Services		00:21:00
Module 03: Laboratory Equipments (Part-01)			
	Module 03: Laboratory Equipments (Part-01)		00:26:00
Module 04: Laboratory Equipments (Part-02)			
	Module 04: Laboratory Equipments (Part-02)		00:15:00
Module 05: Microscope and How to Use It			
	Module 05: Microscope and How to Use It		00:17:00
Module 06: Solutions Used in Clinical/Medical Laboratory			
	Module 06: Solutions Used in Clinical/Medical Laboratory		00:17:00
Module 07: Sterilisation, Disinfection and Decontamination			
	Module 07: Sterilisation, Disinfection and Decontamination		00:18:00
Module 08: Basic Haematology			
	Module 08: Basic Haematology		00:50:00
Module 09: Basic Haemostasis (Coagulation)			
	Module 09: Basic Haemostasis (Coagulation)		00:30:00
Module 10: Basic Immunology and Immunohematology			
	Module 10: Basic Immunology and Immunohematology		00:38:00
Module 11: Urinalysis			
	Module 11: Urinalysis		00:35:00
Module 12: Basic Clinical Chemistry			
	Module 12: Basic Clinical Chemistry		00:39:00
Module 13: Basic Clinical Microbiology			
	Module 13: Basic Clinical Microbiology		00:26:00
Module 14: Basic Parasitology			
	Module 14: Basic Parasitology		00:29:00
Module 15: Laboratory Accidents and Safety			
	Module 15: Laboratory Accidents and Safety		00:18:00
Module 16: Quality Assurance			
	Module 16: Quality Assurance		00:20:00


IOMH - Institute of Mental Health

Lab Technician

<p dir="ltr" id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">Nail art is a popular and lucrative service that many women enjoy. You can learn how to become a professional nail technician with our online course.</span></p><p dir="ltr" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">This course will teach you everything you need to know about nail care and design. You will learn how to use different tools and products to create stunning nail art.</span></p><p dir="ltr" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">You will also learn how to prepare the nails, apply overlays and extensions, and prevent infections. Moreover, you will develop your customer service skills and learn how to advise your clients on the best nail treatments for them.</span></p><p dir="ltr" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">This course is suitable for anyone who wants to start or advance their career in the nail industry. You don&#39;t need any previous qualifications or experience to enrol. You just need a passion for nails and a willingness to learn.</span></p><p dir="ltr" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">By the end of this course, you will have the confidence and skills to work as a nail technician in a salon or as a freelancer.</span></p><h2 dir="ltr" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">Learning Outcome of Nail Technician Diploma&nbsp;</span></h2><ul fr-original-style="" style="box-sizing: border-box;"><li id="isPasted" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Master nail decoration techniques</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Acquire skills in using varnishes, gems, and glitters</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Develop advanced cleaning and filing techniques</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Learn application methods for overlays and nail extensions</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Enhance communication skills with clients</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Gain proficiency in advising clients on nail care and products</li></ul><h2 dir="ltr" fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">Key Features of the Course</span></h2><ul fr-original-style="" style="box-sizing: border-box;"><li dir="ltr" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">A CPD certificate that is recognised worldwide.</span></li><li dir="ltr" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">A great online learning experience.</span></li><li dir="ltr" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Interesting and unique online materials and activities.</span></li><li dir="ltr" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Expert guidance and support from the field leaders.</span></li><li dir="ltr" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Access to the study resources anytime you want.</span></li><li dir="ltr" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Friendly and helpful customer service and admin support by email, phone, and chat from Monday through Friday.</span></li><li dir="ltr" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Get a year-long access to the course.</span></li></ul><h2 dir="ltr" fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">Who is this course for</span></h2><p dir="ltr" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">This Nail Technician Diploma Course is suitable for -</span></p><ul fr-original-style="" style="box-sizing: border-box;"><li id="isPasted" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Aspiring Nail Technicians</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Beauty Enthusiasts</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Individuals Interested in Nail Art</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Salon and Spa Professionals</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Creative Individuals</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Those Considering a Career Change</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Anyone Passionate About Nail Care and Design</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Individuals Eager to Enhance Beauty Skills</li></ul><h2 dir="ltr" fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">Requirements</span></h2><ul fr-original-style="" style="box-sizing: border-box;"><li dir="ltr" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Open to all interested in Nail Care and Design</span></li><li dir="ltr" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">No prerequisites; suitable for individuals from any academic background.</span></li><li dir="ltr" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Accessible course materials from any internet-enabled device.</span></li></ul><h2 dir="ltr" fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">CPD Certificate from Course Gate</span></h2><p dir="ltr" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">At the successful completion of the course, you can obtain your CPD certificate from us. You can order the PDF certificate for &pound;9 and the hard copy for &pound;15. Also, you can order both PDF and hardcopy certificates for &pound;22.</span></p><h2 dir="ltr" fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color:#000000;">Career path<br fr-original-style="" style="box-sizing: border-box;"></span></h2><ul fr-original-style="" style="box-sizing: border-box;"><li id="isPasted" style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Nail Technician</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Manicurist</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Pedicurist</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Nail Artist</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Salon Nail Specialist</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Beauty Spa Technician</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Independent Nail Professional</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Nail Salon Owner</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Nail Educator</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Nail Product Sales Representative</li></ul>

Nail art is a popular and lucrative service that many women enjoy. You can learn how to become a professional nail technician with our online course.
This Nail Technician course will teach you everything you need to know about nail care and design. You will learn how to use different tools and products to create stunning nail art.
You will also learn how to prepare the nails, apply overlays and extensions, and prevent infections. Moreover, you will develop your customer service skills and learn how to advise your clients on the best nail treatments for them.
This Nail Technician course is suitable for anyone who wants to start or advance their career in the nail industry. You don't need any previous qualifications or experience to enrol. You just need a passion for nails and a willingness to learn.
By the end of this course, you will have the confidence and skills to work as a nail technician in a salon or as a freelancer.
Learning Outcome of Nail Technician Diploma 
Master nail decoration techniques
Acquire skills in using varnishes, gems, and glitters
Develop advanced cleaning and filing techniques
Learn application methods for overlays and nail extensions
Enhance communication skills with clients
Gain proficiency in advising clients on nail care and products
Key Features of the Nail Technician Diploma Course
A CPD certificate that is recognised worldwide.
A great online learning experience.
Interesting and unique online materials and activities.
Expert guidance and support from the field leaders.
Access to the study resources anytime you want.
Friendly and helpful customer service and admin support by email, phone, and chat from Monday through Friday.
Get a year-long access to the course.
Who is this Nail Technician Diploma course for
This Nail Technician Diploma Course is suitable for -
Aspiring Nail Technicians
Beauty Enthusiasts
Individuals Interested in Nail Art
Salon and Spa Professionals
Creative Individuals
Those Considering a Career Change
Anyone Passionate About Nail Care and Design
Individuals Eager to Enhance Beauty Skills
Requirements
Open to all interested in Nail Care and Design
No prerequisites; suitable for individuals from any academic background.
Accessible course materials from any internet-enabled device.
CPD Certificate from Course Gate
At the successful completion of the course, you can obtain your CPD certificate from us. You can order the PDF certificate for £9 and the hard copy for £15. Also, you can order both PDF and hardcopy certificates for £22.
Career path
Nail Technician
Manicurist
Pedicurist
Nail Artist
Salon Nail Specialist
Beauty Spa Technician
Independent Nail Professional
Nail Salon Owner
Nail Educator
Nail Product Sales Representative

Course Gate

Beauty Specialist

Nail Art

Nail Extension

Beauty Therapist

Nail Technician

Gel Nail Technician

Do you love nails and want to turn your passion into a career? If so, our Nail Technician Diploma Course is perfect for you! This online course will teach you everything you need to know to become a successful nail technician or salon owner. You'll learn how to create stunning nail designs, perform hygienic and safe procedures, and use professional tools and products. 

Nail Technician Diploma

<p>The world of pharmaceuticals is vast and complex. It's a world where lives are saved, and every single detail matters. And yet, the people who work behind the counter often go unnoticed. The pharmacy technicians play a critical role in ensuring the smooth running of a pharmacy and helping customers understand their medications. If you're looking to break into this field or already work in it, then we have something special for you - the Pharmacy Technician Diploma.</p><p>From Pharmacology to Medical Law, GDPR in Healthcare to Personal Hygiene, each course has been designed with you in mind. Our Medical Terminology Training course, for instance, will help you to understand and use medical terms effectively. Meanwhile, the Control and Administration of Medicines Online Training Course will teach you everything you need to know about handling and dispensing medication safely and efficiently.</p><p>But that's not all. We're also offering a hardcopy CPD certificate for the first course, so you can proudly display your achievements and stand out in your job. Don't miss out on this incredible opportunity to advance your career as a pharmacy technician. Enrol in the Pharmacy Technician Diploma today, and discover the endless possibilities that await you.</p><p><strong>Learning Outcomes for the Pharmacy Technician Diploma:</strong></p><ul><li>Understand the fundamental skills and knowledge required for a pharmacy Technician</li><li>Gain an in-depth understanding of drug classification, administration routes and their effects on the human body</li><li>Learn to communicate effectively with Xhosa-speaking patients</li><li>Understand the principles of medication administration and be able to administer medication safely and efficiently</li><li>Gain a strong foundation in medical terminology and transcription</li><li>Understand the legal and ethical aspects of working in healthcare and the pharmaceutical industry</li><li>Develop an awareness of GDPR regulations in the context of healthcare</li><li>Gain an understanding of personal hygiene and its importance in maintaining good health</li></ul><p><strong>This Pharmacy Technician Diploma (Online) Bundle Consists of the following Premium courses:</strong></p><ul><li><strong>Course 01: </strong>Pharmacy Assistant &amp; Pharmacy Technician</li><li><strong>Course 02: </strong>Pharmacology</li><li><strong>Course 03: </strong>IsiXhosa for Healthcare: The Pharmacist</li><li><strong>Course 04: </strong>Medication Administration Level 4</li><li><strong>Course 05: </strong>Control and Administration of Medicines Online Training Course</li><li><strong>Course 06: </strong>Medical Terminology Training</li><li><strong>Course 07: </strong>Medical Transcription</li><li><strong>Course 08: </strong>Medical Law</li><li><strong>Course 09: </strong>GDPR in Healthcare</li><li><strong>Course 10: </strong>Pandemic Disease Awareness</li><li><strong>Course 11: </strong>Personal Hygiene</li></ul><p>Along with this Pharmacy Assistant &amp; Pharmacy Technician, you will get <strong> 10</strong> additional courses, <strong>original hardcopy certificate, a transcript</strong> and a <strong>student ID card</strong>.</p><p><strong>Curriculum of Pharmacy Technician Diploma (Online) Bundle</strong></p><p><strong>Course 01: Pharmacy Assistant &amp; Pharmacy Technician</strong></p><ul><li>Introduction to Pharmacy Assistant and Pharmacy Technician</li><li>Job Role of Pharmacy Technicians</li><li>Pharmacy Assistant Patient Counselling Guide</li><li>Communication in Pharmacy Settings</li><li>The Pharmacy Team and Practices</li><li>Prescription and Dispensing in Pharmacies</li><li>Dispensing Methods, EPS, Minimising Dispensing Errors in Pharmacies</li><li>Inventory Control and Management in Pharmacies</li><li>Standard Operating Procedures (SOPs)</li><li>Health and Safety Risks Assessment and Pharmaceutical Terminology</li></ul><p>and 10 more courses...</p><p><strong>How will I get my Certificate?</strong></p><p>After successfully completing the Pharmacy <strong>Technician </strong>Diploma (Online) course, you will be able to order your CPD Accredited Certificates (PDF + Hard Copy) as proof of your achievement.</p><ul><li><strong>PDF Certificate: Free (Previously it was £6*11 = £66)</strong></li><li><strong>Hard Copy Certificate: Free (For The Title Course: Previously it was £10)</strong></li></ul><h2>
        
        <div>CPD</div>
    </h2>

                        <div id="cpd">
                            <div>
                                <div>
                                    <div>
                                        110 CPD hours / points
                                    </div>
                                        <div>
                                            Accredited by CPD Quality Standards
                                        </div>
                                </div>
                            </div>
                        </div><h2>
        
        <div>Who is this course for?</div>
    </h2>

                        <div id="who_is_this_course_for">
                            <p>This Pharmacy <strong>Technician </strong>Diploma (Online) is for everyone</p>
                        </div><h2>
        
        <div>Career path</div>
    </h2>

                        <div id="career_path">
                            <p>Pharmacy Technician Diploma (Online) is a useful CPD certificate to possess and would be beneficial for any professions or career from any industry you are in, such as:</p><ul><li>Pharmacist's Assistant</li><li>Pharmacy Technician</li><li>Hospital Clerk</li><li>Pharmacist</li></ul>
                        </div>

Overview:
The world of pharmaceuticals is vast and complex. It's a world where lives are saved, and every single detail matters. And yet, the people who work behind the counter often go unnoticed. Pharmacy technicians play a critical role in ensuring the smooth running of a pharmacy and helping customers understand their medications. If you're looking to break into this field or already work in it, then we have something special for you - the Pharmacy Technician Diploma.
From Pharmacology to Medical Law, GDPR in Healthcare to Personal Hygiene, each course has been designed with you in mind. Our Medical Terminology Training course, for instance, will help you to understand and use medical terms effectively. Meanwhile, the Control and Administration of Medicines Online Training Course will teach you everything you need to know about handling and dispensing medication safely and efficiently.
But that's not all. We're also offering a hardcopy CPD certificate for the first course, so you can proudly display your achievements and stand out in your job. Don't miss out on this incredible opportunity to advance your career as a pharmacy technician. Enrol in the Pharmacy Technician Diploma today, and discover the endless possibilities that await you.
Along with this Pharmacy Assistant & Pharmacy Technician, you will get  10 additional courses, an original hardcopy certificate, a transcript and a student ID card.
This Pharmacy Technician Diploma (Online) Bundle Consists of the following Premium courses:
Course 01: Pharmacy Assistant & Pharmacy Technician
Course 02: Pharmacology
Course 03: IsiXhosa for Healthcare: The Pharmacist
Course 04: Medication Administration Level 4
Course 05: Control and Administration of Medicines Online Training Course
Course 06: Medical Terminology Training
Course 07: Medical Transcription
Course 08: Medical Law
Course 09: GDPR in Healthcare
Course 10: Pandemic Disease Awareness
Course 11: Personal Hygiene



Learning Outcomes for the Pharmacy Technician Diploma:
Understand the fundamental skills and knowledge required for a Pharmacy Technician
Gain an in-depth understanding of drug classification, administration routes and their effects on the human body
Learn to communicate effectively with Xhosa-speaking patients
Understand the principles of medication administration and be able to administer medication safely and efficiently
Gain a strong foundation in medical terminology and transcription
Understand the legal and ethical aspects of working in healthcare and the pharmaceutical industry
Develop an awareness of GDPR regulations in the context of healthcare
Gain an understanding of personal hygiene and its importance in maintaining good health



Description:
Begin your journey with Apex Learning right away!
The Pharmacy Technician bundle incorporates basic to advanced level skills to shed some light on your way and boost your career. Hence, you can strengthen your Pharmacy Technician expertise and essential knowledge, which will assist you in reaching your goal.
★★★ Course Curriculum of Pharmacy Technician Bundle ★★★
Course 01: Pharmacy Assistant & Pharmacy Technician
Introduction to Pharmacy Assistant and Pharmacy Technician
Job Role of Pharmacy Technicians
Pharmacy Assistant Patient Counselling Guide
Communication in Pharmacy Settings
The Pharmacy Team and Practices
Prescription and Dispensing in Pharmacies
Dispensing Methods, EPS, Minimising Dispensing Errors in Pharmacies
Inventory Control and Management in Pharmacies
Standard Operating Procedures (SOPs)
Health and Safety Risks Assessment and Pharmaceutical Terminology
---------- And 10 More Courses ----------
How will I get my Pharmacy Technician Certificate?
After successfully completing the Pharmacy Technician course, you will be able to order your CPD Accredited Certificates (PDF + Hard Copy) as proof of your achievement.
PDF Certificate: Free (Previously it was £9.99*11 = £109)
Hard Copy Certificate: Free (For The Title Course: Previously it was £14.99)



Who is this course for?
This Pharmacy Technician Diploma (Online) is for everyone who is interested in this topic.



Career path
A Pharmacy Technician Diploma (Online) is a useful CPD certificate to possess and would be beneficial for any profession or career from any industry you are in, such as:
Pharmacist's Assistant
Pharmacy Technician
Hospital Clerk
Pharmacist

63 Technician courses in Coventry

Wind Power Generation: Advantages, Design, Site Selection, Equipment Selection, Operation and Maintenance, On-Shore and Off-Shore Wind Farms, Economics, Rate of Return, and Cost of Electricity from Wind Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

CCNP core

By Systems & Network Training

Advanced Process Safety Engineering

By EnergyEdge - Training for a Sustainable Energy Future

NTDA REACT Licence to Work on the Roadside

By PFTP Ltd

CCNA

By Systems & Network Training

Subsea Control Systems & Umbilicals

By EnergyEdge - Training for a Sustainable Energy Future

Process Safety Management & Engineering Applications

By EnergyEdge - Training for a Sustainable Energy Future

Introduction to Power Systems

By EnergyEdge - Training for a Sustainable Energy Future

Gas Turbines, Co-Generation and Combined Cycle Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Electrical Generators, Excitation Systems and Governing Systems

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location