11 Safety Management Systems (SMS) courses in Liverpool

ABOUT THIS TRAINING COURSE This 5 full-day course covers all the main elements of IChemE's Process Safety Competency framework: culture, knowledge and competence, engineering and design, human factors, systems and procedures, and assurance. Participants will achieve at least the second level of competence 'Basic Application', which is defined as 'Performs fundamental and routine tasks. Requires occasional supervision. Increased functional expertise and ability. Works with others.' This course examines the interrelation of the various techniques of process safety for analysing and managing process hazards in the hydrocarbon and chemical processing industries. There is a particular emphasis on engineering design aspects with extensive participation in individual and group exercises, tutored exercises and video case studies throughout the course to underpin key learning points. The learning is consolidated in a comprehensive case study and requires collaboration between members of each syndicate. This course has been reviewed and approved by the Institution of Chemical Engineers. IChemE is the global professional membership organisation for chemical, biochemical and process engineers and other professionals involved in the chemical, process and bioprocess industries. Their knowledge of professional standards, close involvement with industry, education and regulators, and their expertise as a leading global training provider, means they are uniquely positioned to independently assess and approve training courses and professional development programmes across the world. Training Objectives By the end of this course, participants will be able to: * Acquire the underpinning knowledge required to achieve process safety competency * Gain a comprehensive understanding of process safety management * Understand the concept of the safety life cycle of a process plant from conceptual design onwards including operation, maintenance and modification * Understand the hazard scenarios associated with a process plant * Understand how risks can be controlled by hardware and procedural measures * Identify and analyse hazard causes and consequences * Recognise when specialist analytical expertise is required * Generate effective and appropriate measures to reduce risks * Justify and communicate practical solutions to non-technical personnel * Explain the rationale for process safety measures to decision makers Target Audience This course is suitable for process industry professionals who need to acquire a comprehensive understanding of process safety management, those moving into process safety positions or those who wish to broaden their process safety knowledge within their existing discipline. It is particularly suited for anyone involved in the design, operation, modification or maintenance of a major hazard installation. This includes: * Supervisors, operators and maintainers in Oil & Gas, Petrochemical and Chemical industries, * process, mechanical and chemical engineers and technicians * Design engineers, project engineers and HSE managers * Control, automation and instrumentation engineers It will also demonstrate a substantial understanding of process safety for those engaged in Continuous Professional Development or aiming for the Chartered Engineer status. Course Level * Basic or Foundation Trainer Your expert course leader has 50 years' experience in chemical and process safety engineering. His early career included 20 years in design and project engineering with various fine chemical and pharmaceutical companies where he designed chemical processes, specified plant equipment and selected materials for highly corrosive and toxic processes, often where textbook data was not available. This was followed by 10 years in offshore oil and gas design projects where he was responsible for setting up a Technical Safety group to change design safety practices in the aftermath of the 1988 Piper Alpha disaster. In recent years, he has been called upon to conduct various offshore and onshore incident investigations. His career has given him experience in project engineering, project management, process design and operations, safety engineering and risk management. He is a Fellow of the UK Institution of Chemical Engineers. He served on the Scottish Branch committee, and was elected chairman for a two-year term in 1991. He has also been chairman of the Safety and Reliability Society - North of Scotland Branch. He has delivered training courses in Process Hazard Analysis (HAZOP and HAZID), Process Safety Management, Hazard Awareness, Risk Assessment, Root Cause Analysis, Failure Modes & Effect Analysis and has lectured on Reliability Analysis to the M.Sc. course in Process Safety and Loss Prevention at Sheffield University. In addition to delivering training courses, he currently facilitates HAZOP / HAZID / LOPA studies and undertakes expert witness roles advising lawyers engaged in contractual disputes, usually involving the design or construction of chemical plants or Oil & Gas production facilities, or criminal prosecutions. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

ABOUT THIS TRAINING COURSE Managing process hazards in the hydrocarbon and chemical processing industries is a critical function that requires relevant knowledge and skills due to the risks involved. The Advanced Process Safety Engineering course will discuss the interrelation of the various techniques of process safety for analysing, with a particular emphasis on engineering design aspects, as well as how to manage process hazards in a safe and effective way and how they can potentially be avoided. In this 3 full-day advanced level course, the expert course leader will provide participants with insights and examples from his career and experience to show how their learning should be applied in real-life situations. Feedback and questioning is highly encouraged. Reference material and reports can be provided to give more information on any particular topic of interest. Individual and group exercises, tutored exercises and video case studies will be provided throughout the course to underpin the key learning points. Training Objectives Upon completion of this course, participants will acquire in-depth knowledge of: * Risk management and 'As Low as Reasonably Practicable' (ALARP) principles. * Different aspects of process design that influence process safety. * Approach to 'inherently safer' design. * Defence in depth using 'layers of protection'. * Process for ensuring the technical integrity of safety-critical equipment. * Hazards associated with process materials. * Range of hazard identification and consequence modelling techniques. * Causes and mitigation of human error. * Reliability and availability of safety-critical protection equipment. * Role of engineered safety-critical equipment and systems. Target Audience This course is suitable for industry professionals who need to acquire a comprehensive understanding of process safety. This includes those who are required to make managerial decisions where process safety is a key consideration, those who are moving into process safety positions or those who wish to broaden their process safety knowledge within their existing discipline. It is particularly suited for anyone involved in the design, operation, modification or maintenance of a major hazard installation, and will demonstrate a substantial understanding of process safety for those engaged in Continuous Professional Development or aiming for Chartered Engineer status. This course will benefit professionals such as: * Operations and maintenance supervisors * Process, mechanical and chemical engineers and technicians * Design engineers, project engineers and HSE managers * Control, automation and instrumentation engineers Course Level * Advanced Trainer Your expert course leader has 50 years' experience in chemical and process safety engineering. His early career included 20 years in design and project engineering with various fine chemical and pharmaceutical companies where he designed chemical processes, specified plant equipment and selected materials for highly corrosive and toxic processes, often where textbook data was not available. This was followed by 10 years in offshore oil and gas design projects where he was responsible for setting up a Technical Safety group to change design safety practices in the aftermath of the 1988 Piper Alpha disaster. In recent years, he has been called upon to conduct various offshore and onshore incident investigations. His career has given him experience in project engineering, project management, process design and operations, safety engineering and risk management. He is a Fellow of the UK Institution of Chemical Engineers. He served on the Scottish Branch committee, and was elected chairman for a two-year term in 1991. He has also been chairman of the Safety and Reliability Society - North of Scotland Branch. He has delivered training courses in Process Hazard Analysis (HAZOP and HAZID), Process Safety Management, Hazard Awareness, Risk Assessment, Root Cause Analysis, Failure Modes & Effect Analysis and has lectured on Reliability Analysis to the M.Sc. course in Process Safety and Loss Prevention at Sheffield University. In addition to delivering training courses, he currently facilitates HAZOP / HAZID / LOPA studies and undertakes expert witness roles advising lawyers engaged in contractual disputes, usually involving the design or construction of chemical plants or Oil & Gas production facilities, or criminal prosecutions. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

ABOUT THIS TRAINING COURSE Process Hazard Assessment using the HAZOP Technique is an intensely participative course that will both explain the key facets of the HAZOP technique as well as provide ample opportunities for participants to practice and become familiar with the technique using generic and real-life examples. HAZOP Team Leader Training is an intensely participative course that will develop participants already familiar with the HAZOP technique, the skills, knowledge and attributes of a HAZOP Team Leader. An in-depth syndicate exercise will provide the opportunity to lead a HAZOP team (consisting of other participants) and to be observed performing the role for constructive feedback. This 5 full-day course has been reviewed and approved by the Institution of Chemical Engineers (IChemE). IChemE is the global professional membership organisation for chemical, biochemical and process engineers and other professionals involved in the chemical, process and bioprocess industries. Their knowledge of professional standards, close involvement with industry, education and regulators, and their expertise as a leading global training provider, means they are uniquely positioned to independently assess and approve training courses and professional development programmes across the world. Training Objectives Process Hazard Assessment using the HAZOP Technique By the end of this course, participants will be able to: * Understand the basic HAZOP Technique * Fulfill roles as competent HAZOP Team Members * Understand the role of HAZOP in risk management * Understand how Hazard Identification can predict accidents and incidents * Understand how HAZOP complements other hazard identification tool HAZOP Team Leader Training By the end of this course, participants will be able to: * Understand the role of the HAZOP Team Leader * Practise the role in a classroom environment * Provide feedback to participants on their performance as HAZOP Team Leaders * Appreciate the leadership skills required as HAZOP Team Leader * Plan, organise, manage and successfully undertake a Hazard and Operability study Target Audience This course will benefit: * All key persons in the organisation, who by their discipline and/or position, are likely to be called on to initiate, participate or review a HAZOP study. * All who have responsibility for the management and supervision of process & safety including but not limited to Senior Management, Plant Managers, Process and Maintenance Engineers (all disciplines), Line Supervisors, Team Leaders, Safety Specialists, and Process Training Instructors. Course Level * Basic or Foundation Trainer Your expert course leader has 50 years' experience in chemical and process safety engineering. His early career included 20 years in design and project engineering with various fine chemical and pharmaceutical companies where he designed chemical processes, specified plant equipment and selected materials for highly corrosive and toxic processes, often where textbook data was not available. This was followed by 10 years in offshore oil and gas design projects where he was responsible for setting up a Technical Safety group to change design safety practices in the aftermath of the 1988 Piper Alpha disaster. In recent years, he has been called upon to conduct various offshore and onshore incident investigations. His career has given him experience in project engineering, project management, process design and operations, safety engineering and risk management. He is a Fellow of the UK Institution of Chemical Engineers. He served on the Scottish Branch committee, and was elected chairman for a two-year term in 1991. He has also been chairman of the Safety and Reliability Society - North of Scotland Branch. He has delivered training courses in Process Hazard Analysis (HAZOP and HAZID), Process Safety Management, Hazard Awareness, Risk Assessment, Root Cause Analysis, Failure Modes & Effect Analysis and has lectured on Reliability Analysis to the M.Sc. course in Process Safety and Loss Prevention at Sheffield University. In addition to delivering training courses, he currently facilitates HAZOP / HAZID / LOPA studies and undertakes expert witness roles advising lawyers engaged in contractual disputes, usually involving the design or construction of chemical plants or Oil & Gas production facilities, or criminal prosecutions. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

ABOUT THIS TRAINING COURSE This five-day training course will cover aspects of FPSO operations with an emphasis on management of safety. A background of the methodology used to generate the various safety plans and codes used in the operational safety case will be covered. The course will also review general operational guidelines in the offshore environment to ensure that the operations are completed as designed. This will include offtake operations and maintenance processes for the plant and vessel as well as a session on subsea. Training Objectives To enable participants to obtain an in-depth understanding of FPSO operations, safety and maintenance: * Provide a broad overview of how an FPSO operation is set up and established in the field * Grasp the various methods used to moor the production units * Analyse information and methods required to establish the operation according to local and international regulations. * Assess the methods used to calculate the safety parameters and requirements to construct an approved valid safety case * Explore conditions to monitor during operations with regards to safety and structure * Inspect various types of hazards associated with production and produced materials * Review regular and emergency operational maintenance requirements * Examine cyclones and weather events causing disconnection * Comprehend manning, training requirements and operations including cargo Case studies and Exercises: The training course uses real life examples and case studies to explain the setup, preparation, implementation and operational activities required to successfully complete FPSO operations from a safety and maintenance perspective. This will allow the application of participants' newly-acquired knowledge. Case studies also stimulate independent thinking and discussion among the participants. Case Studies The case studies proposed for this course will include: * A group exercise to consider what is the minimum requirement for the production of a safety case * Generic plan for the development of a maintenance management system using computer software systems (e.g. Amos) * Construction of a UWILD plan to include scope and potential tendering requirements Quizzes The various quizzes can be expanded or arranged to suit the group/interests and topics covered but will generally include the following topics: * Mooring types and location where they are primarily used * Safety cases * Safety management systems * Process hazards and mitigation * UWILD components and regulations * Operations management * Offtake operations Target Audience The course is generally aimed at personnel who are involved in FPSO operations as either offshore crew or onshore support team members. This course will also greatly benefit the following groups but not limited to: * Process engineers * Surveyors * Facility engineers * Naval architects * Operations engineer * Health, Safety, Environment (HSE) specialists and managers * Maintenance engineers Course Level * Intermediate Training Methods The training course is presented in an interactive workshop format that allows for discussion. The course will be delivered through analysis of case studies and running examples of problems. Course Duration: 5 days in total (35 hours) The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training comprises of information supplemented by visual activities including photographs from various operations and videos of operational and safety activities. Interaction verbally will be necessary to achieve the best learning outcome from the materials. Course timings and breaks  0830 - Registration 0900 - Start of training 1030 - Morning break 1045 - Training recommences 1230 - Lunch break 1330 - Training recommences 1515 - Afternoon break 1530 - Training recommences 1700 - End of training Trainer Your expert course leader has been involved in the Oil and Gas industry for over 28 years in several different roles commencing as a second deck officer on FPSO's and moving through the industry from deck officer to Master, OIM and Field Superintendent. He has also been in charge of semisubmersible and fixed production platforms as field superintendent before moving ashore into senior management roles. On completion of industry specific activities, he moved to teaching roles at South Tyneside Maritime College in the department of marine and simulation and presented live courses to maritime students from cadet to Master.  Prior to returning to Perth in March 2019, he was training manager for a subsidiary of Gaz Transport and Technigaz of France. He has a Master Class 1 certificate with endorsements for hazardous cargoes and a Graduate Certificate in Business Administration as well as multiple course certificates required to operate FPSO's, platforms and semisubmersible facilities. He has been involved in the preparation of national standards for Safety Cases (Australia); Designing and structural setup of competency-based training systems in South East Asia. He was also involved in the development of minimum standards, competency profiles position based and preparation and implementation of training plans to ensure competency in the local staff in Asian operations. He was part of the development team for minimum standards of offshore safety in Australian offshore operations including the implementation of the Common Safety Training Program (CSTP). He was also involved in implementing training plans for both simulator and classroom based courses in LNG operations and cargo tank design and construction. Highlighted work experience: * Premier Petroleum Myanmar Ltd * Petronas Carigali * Newfield Australia (Cartier) Pty Ltd: * FPSO Jabiru Venture * FPSO Challis Venture * Onshore OIM * Australian FPSO Management Pty. Ltd. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

If you have at least 5 years working experience and you would like to attain Gold Card status via the Experienced Worker route by joining the City & Guilds 2346 NVQ Level 3, you will also need to hold the below two pre-requisite qualifications: City & Guilds 2391-52 Inspection and Testing Course C&G 2382-22 BS7671 18th Edition

The aim of the course is to ensure that safety requirements are appreciated by managers. To enable them to review their own safety systems. It give’s the ability to introduce new controls and possibly implement changes as appropriate to ensure safety in the workplace. -------------------------------------------------------------------------------- WHO SHOULD ATTEND? The course is designed for managers and supervisors in any sector, who are required to manage health and safety risk and resources within their organisation. It is also beneficial for anybody wishing to get into the Health and Safety profession or Management. The IOSH qualification is an impressive qualification to add to a CV. COURSE DURATION: 3 days. LEARNING OBJECTIVES: On successful completion of the course, delegates should be able to: * Explain ‘managing safely’. * Explain the component parts of a recognised safety management system such as HSG65. * Identify the data and techniques required to produce an adequate record of an incident. To demonstrate the procedure for an accident investigation, recognising the human factors involved. * Describe statutory requirements for reporting and procedures for checking non-reporting. * Describe methods of basic trend analysis for reactive monitoring data. * Define ‘hazard’ and ‘risk’, and describe the legal requirements for risk assessment. * Demonstrate a practical understanding of risk assessment technique and the data required for records. * Describe workplace precaution hierarchies. * Prepare and use active monitoring checklists. To implement schedules for active monitoring, recording results and analysing records. * Outline the main provisions of the Health and Safety at Work etc Act and the Management of Health and Safety at Work Regulations. * Outline relevant health and safety legislation, codes of practice, guidance notes and information sources such as the HSE. SYLLABUS: * 1. Module 1 – Introduction and Overview. * 2. Module 2 – Risk Assessment. * 3. Module 3 – Risk Control. * 4. Module 4 – Health and Safety Legislation. * 5. Module 5 – Common Hazards. * 6. Module 6 – Investigating Accidents and Incidents. * 7. Module 7 – Measuring Performance. WHAT DO IOSH MANAGING SAFELY COURSES INVOLVE? The course has seven comprehensive modules. These modules cover risk assessment and control, Health and Safety Legislation [http://www.hse.gov.uk/legislation/], common hazards, accident and incident investigation. Also covered is performance measurement. Effectively covering all aspects of safety management in the workplace. To obtain the IOSH Managing Safely certificate, attendees will need to complete a four day course. The course is delivered using high quality animated graphics. This includes sophisticated, fun presentations to make the content of the course more memorable. With training tools including board games, DVDs and quizzes displaying clear scenarios and essential practical content. We have worked hard to ensure that taking an IOSH Managing Safely course is as enjoyable as possible. Attendees will officially attain their IOSH Managing Safely certificate upon successful completion of both the written and practical assessments of the course. CERTIFICATION: An IOSH Managing Safely certificate is awarded to all those who attend the course successfully completing both written and practical assessments. Candidates will also receive an excellent workbook from IOSH, with all the tools to help them once they are back in the workplace. Understanding of the course material is evaluated by means of a 45-minute written assessment paper consisting of 20 multi-format questions. There is also a practical assessment. MHA Training was established in 2008 based at our training centre in Warrington, Cheshire. We provide an array of services On-Site also for clients around the North West in areas such as Manchester, Liverpool, Widnes, St Helens, Runcorn, Wigan, Preston and Leeds. Over the years we have expanded and have instructors available for all of our courses Nationwide. IOSH MANAGING SAFELY REFRESHER COURSE: Recently IOSH have introduced a one day refresher course. This enables candidates having previously sat a course within 3 years to keep their qualification current and upto date in just a one day course. For more information please see the factsheet below.

This course is designed to assist those on site who have responsibility for managing all forms of...

This is a very popular, comprehensive, practical and experiential programme, covering: * Assessing risks: Defines and demystifies risk and risk assessment. Risk assessments and a simple scoring system are introduced, and participants carry out assessments. * Controlling risks: Cutting risks down, concentrating on the best techniques to control key risks and how to choose the right methods. * Understanding your responsibilities: The legal framework; health & safety management systems. * Identifying hazards: The main issues any organisation has to deal with: entrances and exits, work traffic, fire, chemicals, electricity, physical and verbal abuse, bullying, stress, noise, * housekeeping and the working environment, slips, trips and falls, working at height, computers and manual handling. * Investigating accidents and incidents: Why accidents should be investigated, why things go wrong and how to carry out an investigation when they do. * Measuring performance: How checking performance can help to improve health & safety. How to develop basic performance indicators. Auditing and proactive and reactive measuring. * Protecting the environment: Introduction to waste and pollution. How organisations and individual managers can get involved in cutting down their environmental impacts. THE PROGRAMME ENABLES PARTICIPANTS TO: * Assess and control risks and hazards * Understand their own responsibilities for safety and health * Investigate incidents * Measure their own performance * Reflect on good practice and plan how to ensure the safety of the staff for whom they are responsible

Health and safety awareness training is mandatory for staff at all levels of an organisation. This is the ideal course to satisfy that requirement - a stimulating 'entry-level' programme explaining how health and safety should be managed in any working environment. The course outlines the basics of health and safety law and how organisations and individuals can become liable for health and safety offences. Roles and responsibilities for health and safety are discussed by reference to the key legislation and the expert trainer will explore with the delegates how these responsibilities are managed in practice in different types of organisation. The principles of risk assessment will be considered and their practical implementation discussed in relation to the management of the various hazards that are likely to be present in a typical workplace. This course will give staff: * An understanding of health and safety law, liability and enforcement * An explanation of the principles of health and safety management in the workplace and an understanding of who should be responsible for different aspects of health and safety * A practical explanation of risk assessment and what constitutes a suitable and sufficient assessment * A broad knowledge of the typical hazards in a workplace and how these should be managed 1 OVERVIEW OF HEALTH AND SAFETY LAW * Statute and civil law * Liability and enforcement * Statutory duties * Contract law 2 LEGISLATIVE FRAMEWORK * The workplace - extent of responsibility / shared responsibility * Relevant legislation 3 MANAGEMENT OF HEALTH AND SAFETY * Health and Safety at Work etc Act 1974 * Management of Health and Safety at Work Regulations 1999 * Workplace (Health, Safety and Welfare) Regulations 1992 * Accident Reporting (RIDDOR) * Consultation with Employees and Safety Committees 4 RISK MANAGEMENT WITHIN YOUR ORGANISATION * Business risk management * Health and safety risk management * The principles of risk assessment * Transferring the risk to contractors and third parties 5 RISK ASSESSMENT EXERCISE - 'CHALLENGE ANNEKA' 6 MANAGING THE HAZARDS IN THE WORKPLACE * Work equipment * Lifting equipment * Display screens * Manual handling * Fire * Chemicals (COSHH) * Personal protective equipment (PPE) 7 PRACTICAL EXERCISE - WORKPLACE INSPECTION 8 QUESTIONS, DISCUSSION AND REVIEW

This workshop has been designed to help managers understand their responsibilities and what they need to do to ensure compliance with current workplace legislation - including the fire safety and CDM regulations. The day will cover the legal background - including an appreciation of how safety legislation has evolved and why; the logic behind recent developments and the implications for staff and employers; key areas of current legislation; roles and responsibilities in health and safety management, including monitoring contractors and suppliers effectively; implementing sound health and safety policies and procedures; getting staff on board, and implementing effective systems. Also, recognising potential risks and hazards and developing strategies to minimise their impact in the workplace. This course will give participants an understanding of: * The broader context of the key areas of health and safety regulation which apply to your organisation * Existing health and safety practice and guide them in how to shape and implement an effective health and safety policy * What they should do and the procedures to support it * Potential areas of risk in the workplace - and how to take action to minimise the threat to staff safety * How sound health and safety processes can contribute to business performance 1 UNDERSTANDING THE WORKPLACE LEGISLATION * Overview of health and safety and workplace legislation * Compliance, the role of the facilities manager, and who is accountable? * Breakout session to discuss where we are now and to highlight issues of concern * Applying required policies and procedures * Developing and implementation/review of the safety policy * Communicating with users, clients and contractors * Health and safety manual * 'Selling' health and safety 2 KEY LEGISLATION - A PRACTICAL WORKING GUIDE * Asbestos Regulations * Construction (Design and Management) Regulations 2007 / 2015 * Control of Substances Hazardous to Health (COSHH) Regulations * Disability Discrimination Act (DDA) * Display Screen Equipment (DSE) Regulations 1992 * Electricity at Work Regulations 1989 * Fire Precautions (Workplace ) Regulations 2006 * Health and Safety (Consultation with Employees) Regulations 1996 * Health and Safety (First Aid) Regulations 1981 * Health and Safety at Work etc. Act 1974 * Management of Health and Safety at Work Regulations 1992 * Manual Handling Operations Regulations 1992 * Portable Appliance Testing (PAT) * Provision and Use of Work Equipment Regulations 1992 * REACH - Registration, Evaluation, Authorisation and restriction of Chemicals * Reporting of Injuries, Diseases, and Dangerous Occurrences Regulations (RIDDOR) 1995 * Waste Electrical and Electronic Equipment (WEEE) Regulations 2006 * Work Equipment Regulations 3 CONTROLLING CONTRACTORS * Understanding the Regulations * Selecting and assessing contractors * Understanding and setting accountability * Why a method statement? * How to apply a permit to work system * Safe systems of work * Round-table discussion to bring out issues from participants' own experience 4 RISK ASSESSMENT * Understanding your hazards * Identifying specialist areas * How to undertake these assessments * Implementation of sound systems and processes * Syndicate exercise identifying where assessments are needed and carrying out assessments 5 KEEPING THE WORK ENVIRONMENT SAFE * Sick building syndrome and legionella * Asbestos * Waste management * Pest control * Provisions for first aid * Accident reporting and investigation * At-work driver safety * Security 6 FIRE SAFETY * Understanding the Regulatory Reform Fire Safety Order * Fire certificates * The fire risk assessment * Testing fire-fighting equipment? * Emergency procedures * Workshop to examine the procedures for dealing with different types of emergencies 7 ERGONOMICS PROGRAMME * Ergonomics - important or irrelevant? * Are you complying with HSE regulations? * Furniture and equipment * Display screen equipment assessments * Homeworking - your concern or not? * Syndicate exercise to review what to do when relocating or refurbishing an office 8 INSPECTING AND AUDITING * Role of Health and Safety Executive Inspectors - 'be prepared' * FM role * Staff/trade union involvement * Independent audits * Records and reports * Communicating the results 9 ACTION PLAN * Participants to list actions they need to take after the course