568 Other courses in Totton

The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6) FDSc (Foundation Degree Level) qualification Nationally Recognised certificate Dually accredited: Open College Network and CPD Covers both aspirated and evacuated systems Covers specialised blood collection systems & methods Classroom or Virtual Classroom learning options Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep) Complete your training from beginner to advanced level This course either follows on from our Introduction to Phlebotomy Course or can be combined with our introductory course as part of a course package (see below) Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.

ABOUT THIS TRAINING COURSE Reservoir engineering methods, data and models are used in the E&P business to describe and optimise hydrocarbon recovery. This 5 full-day course addresses reservoir engineering concepts and methods to enable cross-disciplinary team work and the smooth exchange of ideas and experience. In this course, participants will gain an in-depth understanding of the fundamentals of reservoir engineering and a broad range of modern reservoir engineering principles and practices for reservoir development and production, including the estimation of oil and gas reserves. The topics covered in this course will be illustrated with practical and actual field cases. Some self-study or reading will be required from participants. Training Objectives By the end of this course, participants will be able to: * Describe use of permeability and fluid saturation in reservoir engineering. * Explain the assessment of hydrocarbon resources and recoverable reserves estimation. * Understand analysis and modelling of fluid behaviour. * Explain oil and gas reservoir performance. * Describe material balance methods in oil and gas reservoirs. * Understand design and analysis of well tests. * Understand analysis and production of producing wells and forecasting methods. * Describe fluid displacement at the pore and reservoir scale. * Explain reservoir simulation approaches. * Describe tools for handling the uncertainty in reservoir analysis. * Describe various recovery methods from primary to enhanced recovery. Target Audience This course is intended for professionals with prior technical or engineering exposure to exploration and production activities. Targeted participants include geoscientists, production engineers, petrophysicists and petroleum engineers involved with exploration and development of oil & gas reservoirs. The course will also benefit petroleum engineering team leaders as well as IT staff and support staff who work with reservoir engineering, development and production departments. Course Level * Basic or Foundation Trainer Your expert course leader is an independent Reservoir Engineering Consultant, providing project consultancy and reservoir engineering training for global customers. He retired from Shell in 2012 and during the last years of his Shell career, he held the Senior Reserves Consultant for the Middle East and Reservoir Engineering Discipline Lead positions. He is a seasoned Petroleum Engineering professional, with global experience in Shell companies and joint ventures (NAM, SSB, SCL, PDO, SKDBV). His technical expertise is in reserves and resource management, reservoir engineering quality assurance, and staff development as well as carbonate reservoirs, modelling and reservoir simulation.  PROFESSIONAL EXPERIENCE 2012 to date Independent Reservoir Engineering Consultant Petroleum and reservoir engineering advice, training and services. Reservoir engineering training for major oil companies, engineering firms and other global customers. Assurance of SPE and SEC reserves compliance. Participation in SPE reserves and resources estimation Advanced Technology Workshops both as an organising committee member and as session speaker.   2008 - 2012 Shell International E&P, the Hague, the Netherlands Senior Reserves Consultant for Shell business units and joint ventures in the Middle East Region Assurance of SEC and SPE compliance of reserves and resources. Industry publications and conference contributions a.o. SPE guidelines on probabilistic reserves estimation.   2006 - 2008 Shell E&P Technology Solutions, Rijswijk, the Netherlands Reservoir Engineering Discipline Lead Responsible for Reservoir Engineering in global projects and for staff planning and development (over 60 international Reservoir Engineers).   2001 - 2005 Centre for Carbonate Studies, SQU, Oman / Shell International E&P Applications and Research / Shell Representative Office Oman   Petroleum Engineering Manager PE Manager in the Carbonate Research Centre, a joint venture between Sultan Qaboos University in Oman and Shell International. Industrial research projects and teaching on recovery aspects of carbonate reservoir development.   1997 - 2000 Shell International E&P, Rijswijk, the Netherlands Principal Reservoir Engineer Coordination of the NOV subsurface team in Shell Kazakhstan Development BV in 2000. Leading role in Shell Gamechanger project on natural gas hydrates. Acting Shell Group Reserves Co-ordinator in 1997-1998. Facilitation of workshops with government shareholders, including discussions on sensitive reserves issues (BSP Petroleum Unit Brunei, PDO Oman, SPDC government Nigeria).   1992 - 1996 Shell Training Centre, Noordwijkerhout, the Netherlands Reservoir Engineering Programme Training Director Advanced PE training events, QA/QC, design and delivery of courses to Shell staff.   1985 - 1992 Shell International, SIPM, the Hague, The Netherlands Senior Reservoir Engineer Reservoir simulation, integrated reservoir modelling and gas field development and major contributor to the Shell internal Gas Field Planning Tool development. Full field reservoir simulation projects supporting Field Development Plans, operational strategies and unitisation negotiations for Shell Group Operating Companies in the United Kingdom, New Zealand and Egypt.   1984 - 1985 Geological Survey of the Netherlands, Ministry of Economic Affairs Reservoir Engineering Section Head Responsible for Petroleum Engineering advice on oil and gas licences to the Ministry of Economic Affairs. First-hand experience with a government view on resource management.   1976 - 1984 NAM, Assen, The Netherlands and SSB/SSPC, Miri, Malaysia Wellsite Operations Engineer / Operational Reservoir Engineer POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Qualatex Fundamentals Course hosted by Balloon Market. ABOUT THIS EVENT Qualatex Fundamentals Course hosted by Balloon Market Fundamentals – this balloon course for beginners will address all aspects of working with balloons, from basic skills to creative designs, as well as the business essentials necessary to starting a professional balloon business. The class will consist of a combination of demonstrations, presentations and hands-on work. The instructor will demonstrate different balloon types and correct use of equipment and inflation, as well as how to create profitable classic and on-trend designs. This also covers pricing and marketing your work. These are the topics covered during the class: The Qualatex Latex range, equipment overview, air-filled design ideas, pricing your work, Qualatex Microfoil & Bubble balloons, Organic Designs and Helium Inflation With members of the Qualatex team on hand to assist, there will be lots of opportunity to ask questions and network with experienced professionals and other delegates. The day schedule is as follows: • 9:30 – arrive, register & welcome tea/coffee •10:00 – Part 1 of the class •11:30 – Comfort break & Networking •11:45 – Part 2 of the class •13:00 – Lunch & Networking •13:30 – Part 3 of the class •15:00 – Comfort Break & Networking •15:15 – Part 4 of the class •16:30 – Conclusion, Questions, Feedback, Certificates and Group Photo •17:00 - Finish Includes: A comprehensive, full-colour manual that will function as a valuable reference guide, which includes information on float times, basic design principles, pricing, and more. Participants will receive a certificate upon successful completion of the course. By the end of the course you will: * Have the knowledge and confidence to create basic balloon creations including bouquets and garlands * Understand Health and Safety in the Balloon Business * Know how to use different balloons in different situations * Have the knowledge to confidently inflate different types of balloons * Understand pricing and how to make money from balloons * Feel confident in selling your creations with a profitable price tag * Have had the opportunity to interact and connect with others in the industry, just like you! * Have numerous photo opportunities to use for social media * Have the opportunity to appear in a future BMTV episode (should you wish to) Benefits of this course: * Comprehensive, full-colour manual which acts as a valuable reference guide for future jobs with float times, design principles and pricing * Exclusive discount to use at Balloon Market on the day (Place your order before 1pm on the day and you can have your order delivered to you to take away with you before you leave) * Free ‘All Day’ refreshments including light lunch * Ample free parking at the venue * Easy access (only a few minutes from the motorway (J.2, M27) and 15 minutes from the train station / Southampton Airport and Ferry Terminal!) COVID-19 Safety As this class is being taught in person, class numbers and layout have been adjusted to make allowances for social distancing. We will ask each delegate to comply with any reasonable health and safety guidelines that may be applicable at the time of the course, which may include taking a lateral flow test or having your temperature taken before being allowed admittance to the course. As government guidelines are subject to change, full details of Health and Safety measures in place will be supplied to delegates closer to each event delivery date. If you have any queries about booking, please message the Qualatex team directly on pelmarketing@qualatex.com or Balloon Market on info@balloonmarket.co.uk. Cancellation Policy: In the event the class needs to be cancelled, or you are unable to attend, due to Covid-19 infection or requirement to self-isolate, you will be able to transfer your booking to another date for the same course, or a different Qualatex course. In the event there is no suitable course availability, you will be offered a refund. Instructor : Julie Dunham CBA Want to find out what others think about their investment in training? Click the link below.

The QA Level 2 Award in Moving People Safely (RQF) is a regulated and nationally recognised qualification designed for those who work, or intend to work, in a role that involves assisting and moving people. It is the perfect course for those working in a variety of health and social care environments such as care homes.  Successful candidates will learn the key principles of safe handling and how to apply these in their workplace. They will also practise a range of techniques, ensuring that they leave the course confident in the safe moving and handling of people.

The QA Level 3 Award in Administering Emergency Oxygen (RQF) qualification has been designed for those who are responsible for providing care to casualties where the administration of emergency oxygen may be required.  Over a half day period, candidates will learn about the clinical need for emergency oxygen and the safety considerations of this, as well as how to administer emergency oxygen when dealing with a range of conditions.   Successful candidates will leave the course with the knowledge and skills needed to administer emergency oxygen both safely and effectively.  Achievement of this qualification confirms candidates have met both the theoretical and practical requirements, however, it does not imply a ‘license to practice’ – the scope of practice is determined by the organisation responsible for oxygen provision. This qualification does not allow candidates to obtain, store or administer oxygen without clinical governance.

Did you know that following a cardiac arrest, every minute without CPR and defibrillation reduces a casualty’s chance of survival by 10%?  Sudden cardiac arrest is one the UK’s biggest killers, and yet statistics show that most of the British public are unaware of the life-saving difference they can make by performing CPR and defibrillation.  The QA Level 2 Award in Cardiopulmonary Resuscitation and Automated External Defibrillation (RQF) is a regulated and nationally recognised qualification that has been specifically designed to provide candidates with the knowledge and skills needed to perform cardiopulmonary resuscitation (CPR) and use an AED safely in emergency situations.  With an estimated 60,000 out of hospital cardiac arrests occurring every year in the UK alone, make sure you are prepared!

Did you know that incorrect manual handling is one of the most common causes of injury at work?  The QA Level 2 Award in Principles of Manual Handling (RQF) is a regulated and nationally recognised qualification, designed to cover the basic principles of manual handling.  This theory-based qualification is ideal for all employees as it provides candidates with an awareness of safe manual handling practices and the risks of unsafe manual handling.  With subjects covered in just half a day, this course is an ideal way to reduce the risk of workplace manual handling injuries, whilst minimising disruption to your organisation’s day to day activities!  Please note that this qualification does not include practical sessions. Those requiring practical training should undertake the QA Level 2 Award in Safe Moving and Handling (RQF).

Qualatex UK Bubble Tour - Southampton - hosted by Balloon Market. ABOUT THIS EVENT Qualatex UK Bubble Tour - Southampton - hosted by Balloon Market Are you new to balloons, or not had the opportunity to use Bubble Balloons in your work? Or do you already use Qualatex Bubble Balloons but want to explore some new on-trend ideas or improve your technique? Whatever your situation - come and join our fun-filled mini-masterclass and experience the joy of working with Qualatex Bubble Balloons! Qualatex Bubble Balloons are made of stretchy see-through material and are the answer to long-lasting innovative designs, so come and learn how to make them a staple of your balloon decorating business. This 3 hour course runs from 2pm to 5pm on Thursday 7th July and will include demonstrations and hands on training, covering how to inflate Bubbles correctly (with air and helium), tie them off, personalise, make gumballs, add confetti and more! With invaluable hints and tips, and the opportunity to create and take away a number of Bubble designs, it's one not to miss! Book today to secure your place. COVID-19 Safety As this class is being taught in person, class numbers and layout have been adjusted to make allowances for social distancing. We will ask each delegate to comply with any reasonable health and safety guidelines that may be applicable at the time of the course, which may include taking a lateral flow test or having your temperature taken before being allowed admittance to the course. As government guidelines are subject to change, full details of Health and Safety measures in place will be supplied to delegates closer to each event delivery date. If you have any queries about booking, please message the Qualatex team directly on pelmarketing@qualatex.com or Balloon Market on info@balloonmarket.co.uk.

COMPLETE PYTHON TRAINING COURSE DESCRIPTION Python is an agile, robust, expressive, fully objectoriented, extensible, and scalable programming language. It combines the power of compiled languages with the simplicity and rapid development of scripting languages. This course covers Python from the very basics of 'hello world!' through to object oriented programming and advanced topics such as multi threading. Hands on follows all the major sections in order to reinforce the theory. WHAT WILL YOU LEARN * Read Python programs. * Write Python programs. * Debug Python programs. * Use Python's objects and memory model as well as its OOP features. COMPLETE PYTHON PROGRAMMING TRAINING COURSE DETAILS * Who will benefit: Anyone wishing to learn Python. * Prerequisites: None. * Duration 5 days COMPLETE PYTHON PROGRAMMING TRAINING COURSE CONTENTS * Welcome to Python: What is Python? Origins, features. Downloading and installing Python, Python manuals, comparing Python, other implementations. * Getting started: Program output, the print statement, "hello world!", Program input, raw_input(), comments, operators, variables and assignment, numbers, strings, lists and tuples, dictionaries, indentation, if statement, while Loop, for loop. range(), list comprehensions. Files, open() and file() built-in functions. Errors and exceptions. Functions, Classes, Modules, useful functions. * Python basics: Statements and syntax, variable assignment, identifiers, basic style guidelines, memory management, First Python programs, Related modules/developer tools. * Python Objects: Other built-in types, Internal Types, Standard type operators, Standard type built-in functions, Categorizing standard types, Unsupported types. * Numbers: Integers, Double precision floating point numbers, Complex numbers, Operators, Built-in and factory functions, Other numeric types. * Sequences: strings, lists, and tuples: Sequences, Strings, Strings and operators, String-only operators, Built-in functions, String built-in methods, Special features of strings, Unicode, Summary of string highlights, Lists, Operators, Built-in functions, List type built-in methods, Special features of lists, Tuples, Tuple operators and built-in functions, Tuples special features, Copying Python objects and shallow and deep copies. * Mapping and set types: Mapping Type: dictionaries and operators, Mapping type built-in and factory functions, Mapping type built-in methods, Dictionary keys, Set types, Set type operators, Built-in functions, Set type built-in methods. * Conditionals and loops: If, else and elif statements, Conditional expressions, while, for, break, continue and pass statements, else statement . . . take two, Iterators and iter(), List comprehensions, Generator expressions. * Files and input/output: File objects, File built-in functions [open() and file()], File built-in methods and attributes, Standard files, Command-line arguments, File system, File execution, Persistent storage modules. * Errors and exceptions: What are exceptions? Detecting and handling exceptions, Context management, Exceptions as strings, Raising exceptions, Assertions, Standard exceptions, Creating Exceptions, Why exceptions, Exceptions and the sys module. * Functions: Calling, creating and passing functions, formal arguments, variable-length arguments, functional programming, Variable scope, recursion, generators. * Modules: Modules and files, Namespaces, Importing modules, Module import features, Module built-in functions, Packages, Other features of modules. * Object-Oriented Programming (OOP): Classes, Class attributes, Instances, Instance attributes, Binding and method invocation, Static methods and class methods, Composition, Sub-classing and derivation, Inheritance, Built-in functions for classes, and other objects, Customizing classes with special methods, Privacy, Delegation, Advanced features of new-style classes (Python 2.2+), Related modules and documentation. * Execution environment: Callable and code Objects, Executable object statements and built-in functions, Executing other programs. 'Restricted' and 'Terminating' execution, operating system interface. * Regular expressions: Special symbols and characters, REs and Python, Regular expressions example. * Network programming: Sockets: communication endpoints, Network programming in Python, SocketServer module, Twisted framework introduction. * Internet client programming: What are internet clients? Transferring files, Network news, E-mail. * Multithreaded Programming: Threads and processes Python, threads, and the global interpreter lock, The thread and threading Modules. * GUI programming: Tkinter and Python programming, Tkinter Examples, Brief tour of other GUIs. * Web programming: Web surfing with Python: creating simple web clients, Advanced Web clients, CGI: helping web servers process client data, Building CGI applications, Using Unicode with CGI, Advanced CGI, Web (HTTP) Servers. * Database programming: Python database application programmer's interface (DB-API), ORMs. * Miscellaneous Extending Python by writing extensions, Web Services, programming MS Office with Win32 COM, Python and Java programming with Jython.

NETWORKING MICROSOFT SYSTEMS COURSE DESCRIPTION A hands-on course covering the network aspects of Microsoft systems. The course progresses from basic TCP/IP tools and configuration settings through to advanced security considerations finishing with an overview of Exchange and IIS. Hands on sessions are based on a choice of Windows Server 2003 or Windows 2000 server and Windows XP or Windows 2000 professional. Customised versions with other Microsoft platforms are also available. WHAT WILL YOU LEARN * Design networks with consideration for Microsoft issues such as logons. * Design, configure and troubleshoot TCP/IP, DNS, WINS and DHCP. * Configure security features such as PKI and IPSec. * Describe the Windows TCP/IP implementation details. NETWORKING MICROSOFT SYSTEMS COURSE DETAILS * Who will benefit: Anyone working with Microsoft systems. * Prerequisites: TCP/IP foundation for engineers Supporting Windows ( XP or 2000 or 2003) * Duration 5 days NETWORKING MICROSOFT SYSTEMS COURSE CONTENTS * Configuring network cards PnP, resources, Ethernet cards, wireless cards, dial up networking, other cards, Ethernet settings, layer 2 QoS. * Configuring and supporting IP Basic IP settings, advanced IP settings, advanced TCP settings, DrTCP and registry settings, security * DHCP DHCP server, authorising the DHCP service, DHCP client, DHCP relays, Address pools, options, lease duration's, Integrating with DNS. * Microsoft networking overview Workgroups and domains, Domain controllers, the logon process in a network, the role of Active Directory, synchronisation, protocol stacks and bindings. * Accessing file and print resources Shared folders, permissions, network printers, browsing, NetBIOS, SMB. * WINS Servers, clients, Client registration, renewing and releasing of names. NetBIOS node types. * DNS1 Overview, Primary and secondary servers, DDNS, zones, resource records. * The browser service Master, backup and other browser roles, elections, announcements, recovery from failure, Inter subnet browsing. * TCP/IP implementation details Dead gateway detection, Multi homing, multicasting, MTU path discovery, registry settings, QOS and RSVP, Windows as a router, performance implications of Microsoft services. * Internet Access Options, NAT, Firewall capabilities and Proxy server, Internet Authentication Service. * Remote Access Installing, RAS servers. RAS process, protocols * Security: PKI PPTP, L2TP, What is IPSec, configuring IPSec. * Security: VPNs PPTP, L2TP, What is IPSec, configuring IPSec. * Other Microsoft networking services & tools Netmeeting, instant messaging, white boarding, document collaboration, video conferencing Microsoft Exchange, IIS, Directory replication, SNMP, Net Monitor, integration with other platforms.