<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>In today's business environment, there has never been more of a need to make Asset Management and Maintenance more cost effective and efficient. By utilising the Reliability Centred Maintenance process (RCM), you can increase safety performance, reduce maintenance costs, improve the effectiveness of your operations, boost machine uptime, and gain a greater understanding of the level of risk your organisation manages. RCM is just one component of an overall integrated Asset Management Process.</p>
<p>All participants will complete detailed pre-course questionnaires before this 3 full-day course, enabling the trainer to tailor course content in order to meet specific delegate needs. Participant objectives are re-visited before, during and after the course, allowing the trainer to focus on outcomes and address any participant concerns and specific issues during the program.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>At the end of this course, participants will be able to:</p>
<ul>
<li>Develop skills to carry out successful RCMs and introduce the RCM process into their own and their company's daily activities.</li>
<li>Be aware of our changing business environment and the need to apply RCM to drive continuous improvement, in safety, cost reduction, and minimise their environmental footprint</li>
<li>Understand the impact of human reliability and the various methods used to improve this important area</li>
<li>Understand the basics of Change Management and the methods used to securely anchor this process and make it routine</li>
<li>Develop an appreciation for a holistic 'Asset Management' program, and know where the RCM process fits in, and the benefits it will deliver</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>Reliability Centred Maintenance is primarily a team activity and benefits from a cross functional team participation. This course is aimed at <strong>managers, engineers, technicians and operators at all levels</strong> who are responsible for the operation and maintenance of plant equipment and who will benefit from the elimination of bad actors (recurring equipment failure) and continuous improvement in the areas of safety, environmental impact, reliability and integrity.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has enjoyed a 37-year career with Shell International in a variety of leadership roles predominantly in Turnaround, Maintenance and Engineering Management before he left in late 2017 to pursue his interest in Turnaround and Maintenance Management consultancy.</p>
<p>He has undertaken several Asset Management and Engineering positions within Shell Australia including the implementation and establishment of formal Reliability Studies including FMEA, RCA, RCM, Maintenance Planning and Turnaround Management programs at Geelong Refinery.</p>
<p>Additionally, he was appointed Shell's Regional Turnaround Advisor within Australia and South East Asia supporting Shell Operating Companies throughout several Australasian and European sites. In more recent times, he had been engaged to implement and establish a formal Turnaround Management program within Brunei Shell Petroleum as well as becoming the appointed Regional Turnaround Management Subject Matter Expert (SME), TA Network and Governance &amp; Assurance lead for Shell within the Shell Australasian, Russian Federation and Indian Sub-Continent OpCo community.</p>
<p>His career repertoire includes hands-on practitioner, supervisory, reliability, contracts and management roles and he holds several maintenance and engineering tertiary qualifications including an Associate Diploma in Mechanical Engineering. He has presented at several Maintenance, Reliability, Asset Management &amp; Turnaround forums and conferences.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Reliability Centred Maintenance

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This intermediate to advanced level 3 full-day training course has been designed to provide participants with a detailed and up-to-date overview of the fluid mechanic fundamentals and operating practice of pumps, compressors and gas and steam turbines. Upon the successful completion of this course, participants will have acquired the practical knowledge to enable them not only to choose the correct device for a particular application but also be in a position to resolve many commonly occurring operating problems. Troubleshooting is an important part of this course and will cover the important topics of Machinery Root Cause Failure Analysis (RCFA) together with Vibration Analysis.</p>
<p>This course is ideal for those personnel in the oil, gas, petrochemical, chemical, power and other process industries who require a wider and deeper appreciation of pumps, compressors and turbines, including their design, performance and operation. The participants will be taken through an intensive primer of turbo-machinery principles, using the minimum of mathematics, and will learn how to solve the many and varied practical industrial problems that are encountered. The course makes use of an extensive collection of VIDEO material together with case studies and numerical exercises.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon the successful completion of this course, each participant will be able to:</p>
<ul>
<li>Apply a comprehensive knowledge of pumps, compressors &amp; turbines and troubleshoot rotating equipment in a professional manner</li>
<li>Identify the different types of turbomachinery including basic design aspects and highlighted problem areas</li>
<li>Minimise compressor work by understanding the processes involved and identifying their efficiency</li>
<li>Understand the flow through turbomachines and the corresponding velocity triangles including torque and power calculations</li>
<li>Analyse the different types of centrifugal machines including their design, installation, operation, maintenance, re-rate/retrofit, troubleshooting and control</li>
<li>Recognise the various beneficial design aspects of turbomachines and understand the crucial process of cavitation</li>
<li>Carry out proper methods of device installation, operation, maintenance and troubleshooting</li>
<li>Understand and apply the powerful methods of Machinery Root Cause Failure Analysis</li>
<li>Understand the various methods of vibration analysis applied to device diagnostics</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course provides an overview of all significant aspects and considerations of pumps, compressors and turbines for those who are involved in the design, selection, maintenance or troubleshooting of such equipment. This includes maintenance, reliability, integrity, engineering, production and operations managers, engineers and other technical staff.  </p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
<li>Advanced</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a Senior Mechanical &amp; Instrumentation Engineer (UK, B. Sc., M.Eng., Ph D) with over 45 years of industrial experience in Process Control &amp; Instrumentation, Pumps, Compressors, Turbines and Control Valve Technology.</p>
<p>He is currently a Senior Independent Consultant to various petrochemical industries in the UK, USA, Oman, Kuwait and KSA where he provides consultancy services on both the application and operational constraints of process equipment in the oil &amp; gas industries.</p>
<p>During his early career, he held key positions in Rolls Royce (UK) where he was involved in the design of turbine blading for jet engines, subject to pre-specified distributions of pressure. During this period and since, he has also been closely involved in various aspects of Turbomachinery, Thermodynamics and Fluid Mechanics where he has become a recognised authority in these areas.</p>
<p>Later, he joined the academic staff of University of Liverpool in the UK as a Professor in Mechanical Engineering Courses. A substantial part of his work has been concerned with detailed aspects of Flowmetering - both of single &amp; multiphase flows. He has supervised doctoral research students in this area in collaboration with various European flowmeter manufacturers.</p>
<p>He joined Haward Technology Middle East in 2002 and was later appointed as European Manager (a post which has since lapsed) and has delivered over 150 training courses in Flowmeasurement (single- and multi-phase), Control, Heat Exchangers, Pumps, Turbines, Compressors, Valve and Valve Selection as well as other topics throughout the UK, USA, Oman and Kuwait. During the last two years, he has delivered courses with other training companies operating in the Far and Middle East. He has published about 150 papers in various Engineering Journals and International Conferences and has contributed to textbooks on the topics listed above.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Pumps, Compressors, Turbines & Troubleshooting

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This course will begin with a presentation of topics to familiarize Process and Instrumentation Engineers with procedures and practices involved in the choice of sensors related to the measurement of temperature, pressure, level and flow in relation to single-phase flows. It will provide guidance on the optimum commercially available devices through a detailed comparison of their relative merits. At the heart of this course is sensor calibration which is a crucial element for these topics.</p>
<p>The course will also examine the various types of flow control valve, including Globe, Slide, Needle, Eccentric plug and Ball valves and their characteristics in industrial application, while focusing on the problems of Cavitation and Flashing and methods to minimise or eradicate these issues. With the use of examples, industry case studies and a wide range of videos, this course will also cover all aspects of proportional (P), derivative (D) and integral (I) control. In particular, it will address the advantages and disadvantages of PI and PID control. It will also describe Cascade, Feed forward, Split Range, Override and Ratio Control techniques.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By attending this course, participants will acquire the following knowledge and skills:</p>
<ol>
<li>Apply an in-depth knowledge to the measurement of temperature, pressure, level and flow as well as to the fluid mechanics of pipe flows</li>
<li>Assess the advantages and disadvantages of the major flowmeter types including the differential pressure, rotary positive displacement, rotary-inferential, electromagnetic, ultrasonic and Coriolis mass flowmeters to determine the optimum choice for a given application</li>
<li>Make a considered judgement of the choice of fluid level measurement devices</li>
<li>Understand the various types of flow calibration, metering systems and provers</li>
<li>Carry out tank measurement and tank calibration methods and to calculate net sellable quantities</li>
<li>Discuss valve characteristics &amp; trim selection and illustrate the process of control valve sizing</li>
<li>Explain the terms Open and Closed loop</li>
<li>Define Process Variable, Measured Variable, Set Point and Error</li>
<li>Define Direct and Reverse controller actions</li>
<li>Explain the terms Process Lag, Measurement Lag, Transmission Lag, and Response Lag and their effect on controllability</li>
<li>Explain ON/ OFF Control and the inherent disadvantages</li>
<li>Explain Proportional Control, Offset, Gain and Proportional Band and the advantages and disadvantages of Proportional only control</li>
<li>Explain the fundamentals and operation principles of Integral (I) Action and the disadvantages of proportional plus integral control</li>
<li>Explain the fundamentals and operation principles of Derivative (D) Action in conjunction with P action</li>
<li>Describe the operating principles of a PID Controller and explain the applications and advantages of PID control</li>
<li>Describe Cascade, Forward, Split Range and Ratio Control operation principles</li>
</ol>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course will benefit <strong>instrumentation, inspection, control, custody metering and process engineers and other technical staff</strong>. It is also suitable for <strong>piping engineers, pipelines engineers, mechanical engineers, operations engineers, maintenance engineers, plant/field supervisors and foremen and loss control coordinators</strong>.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a Senior Mechanical &amp; Instrumentation Engineer (UK, B. Sc., M.Eng., Ph D) with over 45 years of industrial experience in Process Control &amp; Instrumentation, Pumps, Compressors, Turbines and Control Valve Technology. He is currently a Senior Independent Consultant to various petrochemical industries in the UK, USA, Oman, Kuwait and KSA where he provides consultancy services on both the application and operational constraints of process equipment in the oil &amp; gas industries.</p>
<p>During his early career, he held key positions in Rolls Royce (UK) where he was involved in the design of turbine blading for jet engines, subject to pre-specified distributions of pressure. During this period and since, he has also been closely involved in various aspects of Turbomachinery, Thermodynamics and Fluid Mechanics where he has become a recognised authority in these areas.</p>
<p>Later, he joined the academic staff of University of Liverpool in the UK as a Professor in Mechanical Engineering Courses. A substantial part of his work has been concerned with detailed aspects of Flowmetering - both of single &amp; multiphase flows. He has supervised doctoral research students in this area in collaboration with various European flowmeter manufacturers.</p>
<p>He joined Haward Technology Middle East in 2002 and was later appointed as European Manager (a post which has since lapsed) and has delivered over 150 training courses in Flowmeasurement (single- and multi-phase), Control, Heat Exchangers, Pumps, Turbines, Compressors, Valve and Valve Selection as well as other topics throughout the UK, USA, Oman and Kuwait. During the last two years, he has delivered courses with other training companies operating in the Far and Middle East.</p>
<p>He has published about 150 papers in various Engineering Journals and International Conferences and has contributed to textbooks on the topics listed above.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Process Control and Instrumentation

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p>Governments, regulators and energy companies are pursuing CO<sub>2</sub> storage technologies to meet their net-zero carbon commitments as well as targets set by the international Paris Agreement on climate change. For successfully executing Carbon Capture &amp; Storage (CCS) projects, various technical, operational, economic and environmental risks and associated stakeholders need to be managed.</p>
<p>In this <strong>5 half-day Virtual Instructor Led Training (VILT) course</strong>, the methods for managing risk in CCS projects are addressed <u>with a focus on CO<sub>2 </sub>injection and storage.</u> The VILT course will also demonstrate how to assess storage capacity of a potential CO<sub>2</sub> storage reservoir, model framing techniques, and well injectivity issues related to CO<sub>2</sub> injection. The potential leak paths will be discussed such as reservoir seals, leakage along faults and aspects of well integrity. In the VILT course, the design of a monitoring programme will also be discussed. The VILT course will be supported by various case studies.</p>
<p>This VILT course will cover the following modules:</p>
<ol>
<li>CCS projects in an international context</li>
<li>Site selection and site characterization</li>
<li>Storage capacity assessment</li>
<li>Injectivity assessment</li>
<li>Containment assessment</li>
<li>Measurement, monitoring &amp; verification</li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>On completion of this VILT course, participants will be able to:</p>
<ul>
<li>Uncover the functions and associated components required to capture, transport and store CO<sub>2</sub> in subsurface aquifers and (depleted) hydrocarbon reservoirs</li>
<li>Find a systematic and integrated approach to risk identification and assessment for CO<sub>2</sub> storage projects (maturation)</li>
<li>Appreciate the requirements (physics modelling) and uncertainties to assess the CO<sub>2</sub> storage capacity of a selected site.</li>
<li>Understand the challenges, data and methods to assess CO<sub>2</sub> well injectivity and well integrity</li>
<li>Identify the leakage pathways of a selected storage site, and understand the assessment methods and associated uncertainties</li>
<li>Learn how to design a monitoring program</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course is intended for all surface and subsurface engineers such as facility engineers, geologists, geophysicists, reservoir engineers, petrophysicists, production technologists/engineers, well engineers and geomechanical specialists. Also, (sub)surface team leads, project managers, business opportunity managers, decision executives, and technical risk assessment &amp; assurance specialists will benefit from this VILT course as it provides a common framework and workflow to develop a CCS project.</p>
<p><em><strong>For each class, it is highly recommended that a mix of disciplines mentioned above are represented to facilitate discussions from different perspectives.</strong></em></p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>This VILT course is built around cases in which teams work to identify and assess CO2 storage site issues using a systematic thought approach in this course. In addition, exercises are used to practise the aspects of the CCS risk assessment process. The VILT course provides a venue for discussion and sharing of good practices as well as opportunities to practise multi-discipline co-operation and facilitation.</p>
<p>Participants are encouraged to bring their own work issues and challenges and seek advice from the expert course leaders and other participants about all aspects of CCS.</p>
<p><strong>This VILT course will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 breaks of 10 minutes per day.</strong></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><strong>Trainer 1:</strong></p>
<p>Your expert course leader has more than 36 years of experience in the oil &amp; gas industry with Shell. He gained broad experience in petroleum engineering, with expertise in integrated production systems from subsurface, wells and surface. He has had assignments in Production Technology, R&amp;D, Production Chemistry, Rock Mechanics and Reservoir Engineering cEOR, with a proven track record in technology screening, development and deployment, field development planning, conceptual well design and Production System Optimization (PSO) of gas and oil fields as well as preparing Well, Reservoir &amp; Facility Management (WRFM) strategies and plans. He had also worked on assignments in NAM and did fieldwork in Oman, Gabon and Shell Nigeria. He is a skilled workshop facilitator. He discovered his passion for teaching following an assignment in Shell Learning. During his time in Shell, he developed and taught technical courses to Shell professionals via blended learning.</p>
<p><strong>Trainer 2:</strong></p>
<p>Your second expert course leader has over 30 years of experience identifying, assessing and mitigating technical risks with Shell. The main focal point of his experience is in subsurface and Geomechanical risks. He is the the founding father of various innovations in how we assess risks by tool development (for bore hole stability, 3D geomechanical field evaluations and probabilistic assessment). He also developed an eye for people motivation, change management and facilitation. He was also responsible for the Geomechanical competence framework, and associated virtual and classroom training programme in Shell for 10 years.</p>
<p><strong>Trainer 3:</strong></p>
<p>Your third expert course leader has more than 30 years of experience in Shell, focusing on research and development in drilling and offshore systems. His areas of expertise is in project management, finance, business planning, investment, development studies and economics models. In 2021, he worked on a project that looked into the economic evaluation of P18A field complex for CO<sub>2</sub> storage. He has an MSc in Mechanical Engineering (M.E.) TU Delft Netherlands (Hons) and a baccalaureate from Erasmus University Rotterdam.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Carbon Capture and Storage (CCS): Project Risks & How to Manage Them

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p>Hydrogen will play an increasingly critical role in the future of energy system as it moves forward to supplement and potentially replace fossil fuels in the long run. Offshore wind offers a clean and sustainable renewable resource for green hydrogen production. However, it can also be volatile and presents inherent risks that need to be managed. Even though offshore production of hydrogen has yet to achieve a high state of maturity, many current projects are already dealing with the conditions and effects of offshore production of hydrogen and are grappling with the technological requirements and necessary gas transportation with grid integration.</p>
<p>This 2 half-day Virtual Instructor Lead Training (VILT) course will examine the technological options for on-site production of hydrogen by electrolysis (onshore or offshore directly at the platform) as well as the transport of hydrogen (pipeline or ship). This VILT course will also explore the economic considerations and the outlook on future market opportunities. <span>There will be exercises for the participants to work on over the two half-days.</span></p>
<p>This course is delivered in partnership with Fraunhofer IEE.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><span>By the end of this VILT course, participants will be able to:</span></p>
<ul>
<li><span>Understand the technological attributes and options for green hydrogen production based on electricity from offshore wind.</span></li>
<li><span>Explore the associated economic analysis for offshore wind hydrogen production, including CAPEX, OPEX, LCOE and LCOH</span></li>
<li><span>Identify the critical infrastructure and technical configuration required for offshore green hydrogen including transportation networks and grid connectivity</span></li>
<li><span>Learn from recent findings from current Research &amp; Development projects concerning the differences</span> <span>between onshore and offshore hydrogen production.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p><span>This VILT course is intended:</span></p>
<ul>
<li><span>Renewable energy developers and operators</span></li>
<li><span>Offshore oil &amp; gas operators</span></li>
<li><span>Energy transport and marine operators</span></li>
<li><span>Energy policy makers and regulators</span></li>
<li><span>IPPs and power utilities</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The VILT course will be delivered online in <strong>2 half-day sessions comprising 4 hours per day</strong>, including time for lectures, discussion, quizzes and short classroom exercises.</span></p>
<p>Course Duration: 2 half-day sessions, 4 hours per session (8 hours in total).</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><strong>Trainer 1:</strong></p>
<p>Your expert course leader is Director of Energy Process Technology Division at the Fraunhofer Institute for Energy Economics and Energy System Technology, IEE. The research activities of the division link the areas of energy conversion processes and control engineering. The application fields covered are renewable energy technologies, energy storage systems and power to gas with a strong focus on green hydrogen. From 2006 - 2007, he worked as a research analyst of the German Advisory Council on Global Change, WBGU, Berlin. He has extensive training experience from Bachelor and Master courses at different universities as well as in the context of international training activities - recently on hydrogen and PtX for partners in the MENA region and South America. He holds a University degree (Diploma) in Physics, University of Karlsruhe (KIT).</p>
<p><strong>Trainer 2:</strong></p>
<p><span>Your expert course leader is Deputy Head of Energy Storage Department at Fraunhofer IEE. Prior to this, he was the director of the Grid Integration Department at SMA Solar Technology AG, one of the world's largest manufacturers of PV power converters. Before joining SMA, he was manager of the Front Office System Planning at Amprion GmbH (formerly RWE TSO), one of the four German transmission system operators. He holds a Degree of Electrical Engineering from the University of Kassel, Germany. In 2003, he finished his Ph.D. (Dr.-Ing.) on the topic of wind power forecasting at the Institute of Solar Energy Supply Technology (now known as Fraunhofer IEE) in Kassel. In 2004, he started his career at RWE TSO with a main focus on wind power integration and congestion management. He</span> <span>is Chairman of the IEC SC 8A 'Grid Integration of Large-capacity Renewable Energy (RE) Generation' and has published several papers about grid integration of renewable energy source and forecasting systems on books, magazines, international conferences and workshops.</span></p>
<p><strong>Trainer 3:</strong></p>
<p><span>Your expert course leader is Deputy Director of the Energy Process Technology division and Head of the Renewable Gases and Bio Energy Department at Fraunhofer IEE. His work is mainly focused on the integration of renewable gases and bioenergy systems into the energy supply structures. He has been working in this field since more than 20 years. He is a university lecturer in national and international master courses. He is member of the scientific advisory council of the European Biogas Association, member of the steering committee of the Association for Technology and Structures in Agriculture, member of the International Advisory Committee (ISAC) of the European Biomass Conference and member of the scientific committees of national bioenergy conferences. He studied mechanical engineering at the University of Darmstadt, Germany. He received his Doctoral degree on the topic of aerothermodynamics of gas turbine combustion chambers. He started his career in renewable energies in 2001, with the topic of biogas fired micro gas turbines.</span></p>
<p><strong>Trainer 4:</strong></p>
<p><span>Your expert course leader has an M. Sc. and she joined Fraunhofer IEE in 2018. In the Division of Energy Process Technology, she is currently working as a Research Associate on various projects related to techno-economic analysis of international PtX projects and advises KfW Development Bank on PtX projects in North Africa. Her focus is on the calculation of electricity, hydrogen and derivative production costs (LCOE, LCOH, LCOA, etc) based on various methods of dynamic investment costing. She also supervises the development of models that simulate different PtX plant configurations to analyze the influence of different parameters on the cost of the final product, and to find the configuration that gives the lowest production cost. She received her Bachelor's degree in Industrial Engineering at the HAWK in GÃ¶ttingen and her Master's degree in renewable energy and energy efficiency at the University of Kassel.</span></p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Green Hydrogen Production from Offshore Wind

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p>The 5 half-day Piping Stress Engineering Virtual Instructor Led Training (VILT) course will systematically expose participants to:</p>
<ol>
<li>The theory and practice of piping stress engineering, with special reference to ASME B 31.1 and ASME B 31.3 Standards.</li>
<li>The basic principles and theories of stress and strain and piping stress engineering, through a series of lessons, case study presentations, in-class examples, multiple-choice questions (MCQs) and mandatory exercises.</li>
<li>Principal stresses and shear stresses which form the backbone of stress analysis of a material. Expressions for these quantities will be derived using vector algebra from fundamentals.</li>
<li>Thermal stress-range, sustained and occasional stresses, code stress equations, allowable stresses, how to increase flexibility of a piping system, cold spring.</li>
<li>The historical development of computational techniques from hand calculations in the 1950s to the present-day software.</li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>On completion of this VILT course, participants will be able to:</p>
<ul>
<li>Identify potential loads the piping systems and categorise the loads to primary and secondary.</li>
<li>Determine stresses that develop in a pipe due to various types of loads and how to derive stress-load relationships, starting from scratch.</li>
<li>Treat the primary and secondary stresses in piping system in line with the intent of ASME Standards B 31.1 and B 31.3 and understand how the two codes deal with flexibility of piping systems, concepts of self-springing and relaxation/shake down, displacement stress range and fatigue, what is meant by code compliance.</li>
<li>Understand the principles of flexibility analysis, piping elements and their individual effects, flexibility factor, flexibility characteristic, bending of a curved beam and importance of virtual length of an elbow in the flexibility of a piping system. Learn stress intensification factors of bends, branch connections and flanges.</li>
<li>Understand how the stresses in the material should be controlled for the safety of the piping system, the user and the environment.</li>
<li>Examine how codes give guidance to determine allowable stresses, stress range reduction due to cyclic loading, and effects sustained loads have on fatigue life of piping.</li>
<li>Confidently handle terminal forces and moments on equipment. Understand the supplementary engineering standards required to establish acceptance of the equipment terminal loads and what can be done when there are no engineering standard governing equipment terminal loads is available and learn the techniques of local stress analysis.</li>
<li>Get a thorough understanding of the concepts and the rules established by the ASME B 31.1 and ASME B 31.3 Standards.</li>
<li>Perform flange load analysis calculations based on Kellogg's Equivalent Pressure method &amp; Nuclear Code method. Perform the same using a piping stress analysis software and check for flange stresses and leakage.</li>
<li>Confidently undertake formal training of piping stress analysis using any commercial software, with a clear understanding of what happens within the software rather than a 'blind' software training and start the journey of becoming a specialist piping stress engineer.</li>
</ul>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The VILT course is intended for:</p>
<ul>
<li>Recent mechanical engineering graduates who desire to get into the specialist discipline of Piping Stress Engineering.</li>
<li>Junior mechanical, chemical, structural and project engineers in the industry who wish to understand the basics of Piping Stress Engineering.</li>
<li>Engineers with some process plant experience who desire to progress into the much sought-after specialist disciplines of Piping Stress Engineering.</li>
<li>Mechanical, process and structural engineers with some process plant experience who desire to upskill themselves with the knowledge in piping stress engineering and to become a Piping Stress Engineer.</li>
<li>Any piping engineer with some pipe stressing experience in the industry who wish to understand the theory and practice of Piping Stress Engineering at a greater depth.</li>
</ul>
<p>A comprehensive set of course notes, practice exercises and multiple-choice questions (MCQs) are included. Participants will be given time to raise questions and participants will be assessed and graded based on responses to MCQs and mandatory exercises.</p>
<p>A certificate will be issued to each participant and it will carry one of the three performance levels: Commendable, Merit or Satisfactory, depending on how the participant has performed in MCQs and mandatory exercises.</p>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The VILT course will be delivered online in <strong>5 half-day sessions comprising 4 hours per day, </strong>with 2 breaks of 10 minutes per day.</p>
<p>Course Duration: 5 half-day sessions, 4 hours per session (20 hours in total).</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a fully qualified Chartered Professional Engineer with over 40 years of professional experience in Oil &amp; Gas (onshore and offshore), Petrochemical and Mining industries in engineering, engineering/design management and quality technical management related to plant design and construction. At present, he is assisting a few Perth based oil &amp; gas and mining companies in detail engineering, piping stress analysis, feasibility study and business development work related to plant design. He is a pioneer in piping stress engineering in Western Australia.</p>
<p>His recent major accomplishments include the following roles and challenges:</p>
<ol>
<li>Quality Technical Support Manager of USD 54 billion (Gorgon LNG Project). This encompassed management of quality technical services connected with Welding, Welding Related Metallurgy, Non-Destructive Examination, Insulation /Refractory /Coating, AS2885 Pipelines Regulatory Compliance and Pressure Vessel Registration.</li>
<li>Regional Piping Practice Lead and Lead Piping Engineer of Hatch Associates. In this role, he was responsible for providing discipline leadership to several mining projects for BHP Billiton (Ravensthorpe), ALCOA-Australia (Alumina), MaÃ¡den Saudi Arabia (Alumina), QSLIC China (Magnesium), COOEC China (O&amp;G Gorgon). He was actively involved in the development of piping engineering practice in WA, including training and professional development of graduate, junior and senior engineers. This also includes the formation of the Piping Engineering Specialist Group.</li>
<li>Lead Piping/Pipe Stress Engineer on ConocoPhillips' (COP) Bayu Undan Gas Recycle, Condensate production and processing platform. He was able to develop several novel design methodologies for the project and provided training to engineers on how to implement them. These methodologies were commended by COP and the underwriters of the project Lloyds Register of Shipping, UK.</li>
<li>Creator of Piping Engineering Professional Course aimed at global engineering community.</li>
</ol>
<p><strong>Professional Affiliations:</strong></p>
<ul>
<li>Fellow, Institution of Mechanical Engineers, UK (IMechE)</li>
<li>Fellow, Institution of Engineers, Australia (EA), National Register of Engineers (NER)</li>
<li>Member American Society of Mechanical Engineers, USA (ASME)</li>
<li>Honorary Life Member, Institution of Engineers, Sri Lanka (IESL)</li>
</ul>
<p> </p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Piping Stress Engineering

<div>
</div>
<section>
<div>
<h2>About this Training</h2>
<p>Front End Loading (FEL) is a methodology that takes a deliberate approach to capital project planning. Where traditional project plans seek to help an operator reach production targets and budgets, FEL methodology aligns an operator's technical and business goals to create a more comprehensive development plan. The FEL approach increases project definition and lowers risk to positively impact total investment costs and return on investment.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will be able to:</p>
<ul>
<li>Learn the methods applied for Pre-FEL and FEL process</li>
<li>Understand the importance of FEL, FEL stages; visualisation, conceptualisation, definition</li>
<li>Uncover how to apply project management during FEL</li>
<li>Determine risk management in the FEL process</li>
<li>Understand benchmarking &amp; value improving practices</li>
</ul>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The course is recommended for anyone who wish to gain in-depth knowledge and understanding of the importance of Front-End Loading and how to apply Front End Loading best practices, including:</p>
<ul>
<li>Team Leaders</li>
<li>Senior Managers (Line and Function)</li>
<li>Project Managers</li>
<li>Development Engineers</li>
<li>Graduate Engineers</li>
<li>Quality Assurance Engineers</li>
<li>Key Contractor's Management</li>
<li>FEED engineers</li>
<li>Design engineers</li>
<li>Mechanical engineers</li>
<li>Process engineers</li>
</ul>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a subsea pipeline consultant with extensive experience in the design, construction, and installation of subsea pipelines for the oil and gas industry. As a consultant, he provides technical expertise and support to clients on all aspects of subsea pipeline projects, from the initial planning and design phase through to construction and commissioning. He is knowledgeable about industry standards, regulations, and best practices for subsea pipelines, and works closely with clients to ensure that projects are delivered safely, on time, and within budget. He has over thirty years' experience in early concept and front-end studies for the initiation of numerous high value upstream oil and gas projects worldwide. He has worked for both Operating Companies and Consultants managing the FEL process for complex, multi-discipline and technically challenging concepts, combining both his technical and project management skills. He has been working with companies like ExxonMobil, Quantum Power, North Caspian Operating Company, OMV Petrom, Port Meridian, BG Group, and etc.</p>
<p> </p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Front End Loading in Oil and Gas Projects

<section style="color: rgb(33, 37, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(33, 37, 41);"><h2 style="color: rgb(62, 57, 52); box-sizing: border-box;" fr-original-style=" color: rgb(62, 57, 52);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">About this Virtual Instructor Led Training (VILT)</strong></h2><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">intermediate level 5 half-day Virtual Instructor Led Training (VILT) course</strong>&nbsp;is a comprehensive course that explains the technology of shell and tube heat exchangers as these robust types of heat exchangers are the most commonly used in the process and refinery industries where they provide flexibility and are easy to maintain.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The VILT course will provide details on the thermal and mechanical design, fabrication, inspection and maintenance in relation with international standards such as TEMA, API and ISO. For this heat exchanger type, the focus is on the mechanical and practical aspects.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Many case studies will be presented to demonstrate failures and mismatches. The thermal and mechanical design is conducted using sophisticated computer software and this VILT course is intended to complement thermal design training based on HTRI software. Participants will be offered problem case studies in order to reach solutions on their own.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To get a full picture of proven (advanced) heat transfer technologies, a basic training module for other types of heat exchangers is included. Besides Air Cooled, there will be a discussion on compact heat exchangers in more detail with all their pros and cons.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Participants are advised to bring a scientific calculator and laptop with Microsoft Excel installed.</p></section><section style="color: rgb(33, 37, 41); box-sizing: border-box;" fr-original-style=" color: rgb(33, 37, 41);"><a data-toggle="collapse" href="https://petroedgeasia.net/training/tema-htri-heat-exchanger-design-cost-saving-management-virtual-instructor-led-training-vilt/#collapseOne" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TRAINING OBJECTIVES</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">By the end of this VILT course, participants will be equipped on the following:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">For engineers, this VILT course will provide a broad understanding of the technology and an excellent base for further learning.</li><li fr-original-style="" style="box-sizing: border-box;">For those responsible for thermal design, TEMA type selection, the training is intended to illustrate the interaction between the thermal and mechanical design, the understanding of which will lead to more reliable design outcomes.</li><li fr-original-style="" style="box-sizing: border-box;">For those coming from an operating environment, the VILT course will lead to a greater knowledge of the maintenance, inspection and repair needs of shell and tube heat exchangers, including information on common causes of failure. Solutions will be offered using the latest &ldquo;state of art&rdquo; technologies used to prevent fouling, tube vibration and throughput limitations.</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/tema-htri-heat-exchanger-design-cost-saving-management-virtual-instructor-led-training-vilt/#collapseTwo" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TARGET AUDIENCE</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This VILT course is intended for professionals who want to improve the performance of heat exchanger in their company for shell and tube and compact types and include:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Mechanical Engineers</li><li fr-original-style="" style="box-sizing: border-box;">Design Engineers</li><li fr-original-style="" style="box-sizing: border-box;">Maintenance Engineers</li><li fr-original-style="" style="box-sizing: border-box;">Instrument Engineers</li><li fr-original-style="" style="box-sizing: border-box;">Project Engineers</li><li fr-original-style="" style="box-sizing: border-box;">Process Engineers</li><li fr-original-style="" style="box-sizing: border-box;">Heat Transfer Engineers</li><li fr-original-style="" style="box-sizing: border-box;">Plant Engineers</li><li fr-original-style="" style="box-sizing: border-box;">Operation Engineers</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/tema-htri-heat-exchanger-design-cost-saving-management-virtual-instructor-led-training-vilt/#collapsecl" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">COURSE LEVEL</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Intermediate</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/tema-htri-heat-exchanger-design-cost-saving-management-virtual-instructor-led-training-vilt/#collapseThree" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TRAINING METHODS</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This VILT course will be delivered online in&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">5 half-day sessions comprising 4 hours per day</strong>, with 2 breaks of 10 minutes per day.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Course Duration: 5 half-day sessions, 4 hours per session (20 hours in total).</p></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/tema-htri-heat-exchanger-design-cost-saving-management-virtual-instructor-led-training-vilt/#collapseFive" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TRAINER</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your expert course leader has almost 40 years of experience in Heat Exchanger Technologies. He is an international expert in heat exchanger type selection, special thermal/hydraulic design and latest enhanced heat transfer technologies. He conducts many training courses in this area and more than 1,000 employees, representing more than 250 companies, have attended his courses.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Additional Positions &amp; Credentials</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Former Chairman and Founder of HTRI&rsquo;s first Communication Committee: CC-Holland</li><li fr-original-style="" style="box-sizing: border-box;">CC-Holland (Chairman 1994 &ndash; 1997; Member 2004 &ndash; Present)</li><li fr-original-style="" style="box-sizing: border-box;">Chairman of NLAHX SenterNovem Working Party (1999 &ndash; 2010)</li><li fr-original-style="" style="box-sizing: border-box;">Member of ESDU Crude Oil Fouling Working Party (1999 &ndash; 2003)</li><li fr-original-style="" style="box-sizing: border-box;">Guest Lecturer Technical University Twente &amp; Eindhoven, The Netherlands</li><li fr-original-style="" style="box-sizing: border-box;">Guest Lecturer HTRI European Seminar October (2004 &amp; 2005)</li><li fr-original-style="" style="box-sizing: border-box;">Member of the Tasc-Force Committee ISO 16812</li><li fr-original-style="" style="box-sizing: border-box;">HTRI&rsquo;s Representative for The Netherlands (2008 &ndash; 2013)</li><li fr-original-style="" style="box-sizing: border-box;">Senior Fellow Heat Exchangers at BECHT</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Publications</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Reduced Total Life Cycle Costs Using Helixchanger Heat Exchangers and Enhancement Technology for the Process Industries (Co-Author, Davos, Switzerland July, 2001)</li><li fr-original-style="" style="box-sizing: border-box;">Reduced Total Life Cycle Costs Using Helixchanger Heat Exchangers (Co-Author, Hamilton, Canada, October, 2003)</li><li fr-original-style="" style="box-sizing: border-box;">Most frequently used Heat Exchangers from pioneering research to application worldwide (Co-Author, Prague, Czech Republic, October, 2004)</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Previous Clients Include:</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">BP</li><li fr-original-style="" style="box-sizing: border-box;">TOTAL</li><li fr-original-style="" style="box-sizing: border-box;">ExxonMobil</li><li fr-original-style="" style="box-sizing: border-box;">Shell Global Solutions</li><li fr-original-style="" style="box-sizing: border-box;">BASF</li><li fr-original-style="" style="box-sizing: border-box;">Technip</li><li fr-original-style="" style="box-sizing: border-box;">Aker Kvaerner</li><li fr-original-style="" style="box-sizing: border-box;">AKZO</li><li fr-original-style="" style="box-sizing: border-box;">Stamicarbon</li><li fr-original-style="" style="box-sizing: border-box;">FLUOR</li><li fr-original-style="" style="box-sizing: border-box;">Worley</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/tema-htri-heat-exchanger-design-cost-saving-management-virtual-instructor-led-training-vilt/#collapseCS" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">POST TRAINING COACHING SUPPORT (OPTIONAL)</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &ldquo;One to One&rdquo; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;"><a href="mailto:info@asiaedge.net?subject=Request%20for%20further%20information%20regarding%20post%20training%20coaching%20support" target="_blank" rel="noopener" style="color: rgb(0, 123, 255); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 123, 255);">Request for further information about post training coaching support</a>&nbsp;and fees applicable for this.</p></div></section>

Maintenance

Acquire in-depth knowledge of heat exchanger design and cost-saving management with EnergyEdge's TEM & HTRI course. Join our virtual instructor-led training to stay ahead in the industry.

TEMA & HTRI Heat Exchanger Design & Cost Saving Management – Virtual Instructor Led Training (VILT)

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Asset maintenance and equipment reliability teams play a significant role to ensure that there is no room for downtime and losses in production. They are often recognised for their contribution and ability to keep assets running productively in today's organisations.</p>
<p>This 4 full-day <strong>Certificate in Asset Management</strong> course will provide those involved in Asset Management with a full explanation of the key processes to manage assets across their lifecycle. This course has been designed to equip participants with practical skills to take back to work. This course enables participants to ensure their organisation's assets are realising their full value in support of the organisation's objectives.</p>
<p>Accredited by the <strong>Institute of Asset Management (IAM)</strong>, this course will prepare participants to sit for the <strong>IAM Asset Management Certificate</strong> qualification. The IAM exam is offered as an option for participants of this course.</p>
<figure></figure>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, the participants will be able to:</p>
<ul>
<li>Understand the key principles, tools and terminology of Asset Management, and demonstrate how it will benefit their organisation</li>
<li>Gain familiarity in the application of <strong>ISO 55000 in practice</strong></li>
<li>Access a range of models that will support the implementation of asset management in their organisation</li>
<li>Have their understanding of Asset Management tools and concepts assessed</li>
<li>Learn new Asset Management skills and models that will enhance their current performance</li>
<li>Be better prepared for the Institute of Asset Management (IAM) Certificate Examination</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course will benefit <strong>maintenance managers, operations managers, asset managers and reliability professionals, planners and functional specialists</strong>. It will also be useful for <strong>facilities engineers, supervisors/managers and structural engineers/supervisors/ and managers</strong>.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Other than world-class visuals and slides, this course will include a high level of interaction between the facilitator and participants and group discussion among the participants themselves. There will be a number of exercises &amp; quizzes to demonstrate key points and to give participants the chance to apply learning and appreciate key aspects of best practice. Participants will also have the chance to share examples from their own experience, discuss real problems they are facing and develop actions for improvement when they return to work.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a is a highly experienced in maintenance and turnaround specialist. He is a Chartered Mechanical Engineer, having spent 19 years working for BP in engineering, maintenance and turnaround management roles. During this time, he worked on plants at all ages in the lifecycle, from construction, commissioning and operating new assets to maintaining aging assets and decommissioning. He has taken roles in Projects, Human Resources and Integrity Management which give real breadth to his approach. He also specialized in Continuous Improvement, gaining the award of International Petrochemical Coach of the year. He stays up to date with the latest industrial developments through his consulting support for major clients. He is also the Asset Management lead and a VILT specialist, having delivered over 70 days of VILT training in the last year. He has an engaging style and will bring his current industrial experience, proficiency of VILT techniques and diverse content, gathered from a comprehensive training portfolio, to deliver a distinctive training experience.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

The Principles of Asset Management

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Certificate Training Course (VILT)</strong></h2>
<p>Asset maintenance and equipment reliability teams play a significant role to ensure that there is no room for downtime and losses in production. They are often recognised for their contribution and ability to keep assets running productively in today's organisations.</p>
<p>The <strong>Certificate in Asset Management Virtual Instructor Led Training (VILT)</strong> course will provide those involved in Asset Management with a full explanation of the key processes to manage assets across their lifecycle. This recognised VILT course has been designed to equip participants with practical skills to take back to work. This VILT course enables participants to ensure their organisation's assets are realising their full value in support of the organisation's objectives.</p>
<p>Accredited by the <strong>Institute of Asset Management (IAM),</strong> this VILT course will prepare participants to sit for the <strong>IAM Asset Management Certificate</strong> qualification. The IAM exam is offered as an <em>option</em> for participants of this VILT course.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By the end of this VILT course, participants will be able to:</p>
<ul>
<li>Understand the key principles, tools and terminology of Asset Management, and demonstrate how it will benefit your organisation</li>
<li>Gain familiarity in the application of <strong>ISO 55000 in practice</strong></li>
<li>Access a range of models that will support the implementation of asset management in your organisation</li>
<li>Assess your understanding of the current tools and concepts applied in Asset Management</li>
<li>Capture new ideas and skills that will enhance performance and be better prepared for the Institute of Asset Management (IAM) Certificate Examination</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course will <strong>benefit maintenance managers, operations managers, asset managers and reliability professionals, planners and functional specialists</strong>. It will also be useful for <strong>facilities engineers, supervisors/managers and structural engineers/supervisors/ and managers</strong>.</p>
<p><strong>IAM Qualifications Syllabi</strong><br />
This document details the scope of the individual topics which comprise the examination modules, and how the exams are assessed. It is important that prospective candidates understand the scope of the modules to determine the preparation required. <strong>Download here</strong></p>
<p><strong>IAM Qualifications Candidate Handbook</strong><br />
This handbook provides more detailed information on registering as a candidate, learning resources, training courses, booking an exam, exam regulations and what happens after an exam - whether you are successful or unsuccessful. <strong>Download here</strong></p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The VILT course will be delivered online in <strong>5 half-day sessions comprising 4 hours per day</strong>, with 2 breaks of 15 minutes per day. Course Duration: 5 half-day sessions, 4 hours per session (20 hours in total)</p>
<p>Other than world-class visuals and slides, this VILT course will include a high level of interaction between the facilitator and participants and group discussion among the participants themselves. There will be a number of exercises &amp; quizzes to demonstrate key points and to give participants the chance to apply learning and appreciate key aspects of best practice. Participants will also have the chance to share examples from their own experience, discuss real problems they are facing and develop actions for improvement when they return to work.</p>
<ul>
<li><strong>Examples of the exercises that are used in this VILT course are as follows:</strong><br />
Exercises: Aligning Assets to Business Objectives, Planning for Contingencies, Understanding Function and Failure.</li>
<li>Group exercises: Asset Management Decision Making, Incident Review &amp; Operations Optimisation.</li>
</ul>
<p><strong><em>The workshop content will be adjusted based on the discussions, interests and needs of the participants on the course.</em></strong></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a is a highly experienced in maintenance and turnaround specialist. He is a Chartered Mechanical Engineer, having spent 19 years working for BP in engineering, maintenance and turnaround management roles. During this time, he worked on plants at all ages in the lifecycle, from construction, commissioning and operating new assets to maintaining aging assets and decommissioning.</p>
<p>He has taken roles in Projects, Human Resources and Integrity Management which give real breadth to his approach. He also specialized in Continuous Improvement, gaining the award of International Petrochemical Coach of the year. He stays up to date with the latest industrial developments through his consulting support for major clients.</p>
<p>He is also the Asset Management lead and a VILT specialist, having delivered over 70 days of VILT training in the last year. He has an engaging style and will bring his current industrial experience, proficiency of VILT techniques and diverse content, gathered from a comprehensive training portfolio, to deliver a distinctive training experience.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Educators providing Mechanical Engineering courses in Glasgow

Courses matching "Mechanical Engineering"

Reliability Centred Maintenance

By EnergyEdge - Training for a Sustainable Energy Future

Pumps, Compressors, Turbines & Troubleshooting

By EnergyEdge - Training for a Sustainable Energy Future

Process Control and Instrumentation

By EnergyEdge - Training for a Sustainable Energy Future

Carbon Capture and Storage (CCS): Project Risks & How to Manage Them

By EnergyEdge - Training for a Sustainable Energy Future

Green Hydrogen Production from Offshore Wind

By EnergyEdge - Training for a Sustainable Energy Future

Piping Stress Engineering

By EnergyEdge - Training for a Sustainable Energy Future

Front End Loading in Oil and Gas Projects

By EnergyEdge - Training for a Sustainable Energy Future

TEMA & HTRI Heat Exchanger Design & Cost Saving Management – Virtual Instructor Led Training (VILT)

By EnergyEdge - Training for a Sustainable Energy Future

The Principles of Asset Management

By EnergyEdge - Training for a Sustainable Energy Future

The Principles of Asset Management - IAM Certificate in Asset Management - Virtual Instructor Led Certificate Training Course

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location