28 Logistics courses in London

Fully Funded Training - No Cost to You Are your drivers prepared for the challenges of navigating urban roads alongside vulnerable road users? Introducing our cutting-edge FORS Approved Virtual Reality Safe Urban Driving Training – an interactive, immersive classroom-based experience that revolutionises road safety awareness. Why Choose Our Training? - Immersive Learning: Our training takes your drivers on a journey into the world of vulnerable road users. Using virtual reality headsets, they'll experience firsthand the complexities of cyclists navigating bustling city streets. This immersive approach empowers drivers to learn, adapt, and foster a road safety culture. - Accessibility: We understand that getting behind the handlebars after years of non-riding can be daunting. Our training provides a comfortable and risk-free environment for drivers to reconnect with the cyclist's perspective and grasp the dangers vulnerable road users face daily. - Consistency is Key: Unlike unpredictable real-world scenarios, our interactive learning ensures a consistent, high-quality training experience. Drivers gain valuable insights without the uncertainties of on-road cycling courses. Course Details: - Duration: Our DCPC-approved course runs for seven hours, plus breaks, aligning with DVSA periodic training regulations. - Requirements: Participants must be able use their handheld mobile phone to download the app which they have use on the day, and for a further 3 months if they want to continue to practice questions and watching the interactive videos.  Course Content: - The Urban Landscape: Understanding the changing streetscape and urban environment. - Sharing the Road: Safely interacting with vulnerable road users.- Defensive Driving: Techniques and maintaining vehicle safety equipment effectiveness.- Exchanging Places: Enhancing driver attitude and perception.- Active Travel: An introduction to driver fitness, health, and its impact on road safety.- Hazard Recognition: Insight into the challenges faced by vulnerable road users. This course, approved by licensed training providers for the Driver CPC, runs for seven hours in compliance with periodic training regulations. Note that the DVSA 7-hour upload is not covered by the funding, and participants will be required to make a payment of £10 per person (£8.75 upload fee and £1.25 admin in vat) on the day of training to receive this certification. Total Compliance is are nationwide Transport, Logistics and Construction Consultants & Trainers. www.totalcompliance.co.uk if you need any further information, please contact 0345 900 1312.

Understanding property investment cash flows in all its complexity by type of investment and by purpose -------------------------------------------------------------------------------- ABOUT WHO COULD BENEFIT? This senior practitioner-led on-line course is aimed at c-suite/senior managers but is also suitable for junior staff keen to understand how cash flows get used higher up within the company or the various forms that cash flows can take, or service / database / software providers. Only £875+VAT pp on a public course. In this face-to-face course we drill down to all types of cash flows across the real estate spectrum and within the different levels within companies and by asset type. We help you get to grips with reality, and help you focus on the most important cash flow aspects across the property industry. Do you work as: * Board and Investment Committee Members, Managers and Team Leaders dealing in multi-asset classes as investor or manager to obtain a sound, comprehensive overview of the relevance and importance of understanding cash flow uses * Analysts and Associates in particular working in multi-disciplinary real estate teams engaged in investment, lending, asset management and development * Data, system and service providers keen to understand the various forms and uses of cash flows and its inputs across the property industry -------------------------------------------------------------------------------- MODULES DEEPER UNDERSTANDING OF RE CASH FLOWS Property investment is driven by the promise of quality cash flow over time. It is essential to gain a better understanding of the various forms cash flow can take, as each asset type and asset structure is unique. Financial modelling courses only provide you the tools how to model, but fail to provide a deeper understanding why or what you model in real-life in all its complexities. This course provides you with insight, detailed knowledge and experience on the assumptions. Cash Flows in reality vary wildly in construction and complexity. There are many types of cash flows, suited to its specific circumstance and use, and get used in different ways in decision making. Only £875+VAT pp for this 1-day course! This senior-practitioner-led course is aimed at c-suite/senior managers but is also suitable for junior staff keen to understand how cash flows get used higher up within the company or the various forms that cash flows can take. This course, in brief, provides: – a comprehensive overview of how cash flows differ across property –  applicable to a range of real estate investment deal types and asset classes such as office, shopping centres, residential (PRS), warehouse-logistics and industrial. – context in which information derived from cash flows is used – the contribution of cash-flow outputs in decision-making – high-level detail of the inputs, assumptions and outputs – sound understanding of how cash flow models enable analysis of financial statements, appraisals & risk sensitivities – highlights good practice for cash flow model structure set-up and controls, – highlights key metrics, terminology, etc Detailed course manual provided on the day. This course is taught by dedicated, friendly and seasoned practitioner Kaushik Shah Press ‘see content’ below to see detailed content. Next Date Available: Thursday 20 June 2024 | Location: On-line or C. London as desired IN-HOUSE COURSE “DEEPER UNDERSTANDING OF RE CASH FLOWS” In-house tailor-made course written and presented by senior property practitioners. In one engaging they will be providing you with a deeper understanding of the inputs, drivers and outputs of real estate cash flows – how do they differ, why, and how are they used? In the end it is (the promise of future) cash flows that drive real estate value. Only £3,850/day + VAT for this is an essential knowledge course to help you understand property in all its complexity. Next Date Available: in-house dates available upon request -------------------------------------------------------------------------------- PRICING FIND THE BEST PRICE.   Property Overview offers competitively priced training courses with unique practitioner-led content. Applied, relevant content in this retail property course leads to greater impact and value-for-money. Pricing below is shown for public courses for individual bookings, and for in-house courses. To book one or several individual places please fill in the booking form, or email kaushik@propertyoverview.co.uk For bookings of 4 or more staff an on-line in-house course is recommended, also as the content can be tailored around your needs and your products or services. -------------------------------------------------------------------------------- DEEPER UNDERSTANDING OF RE CASH FLOWS -------------------------------------------------------------------------------- £875PP +20% VAT Single place on a public course IN-HOUSE COURSE “DEEPER UNDERSTANDING OF RE CASH FLOWS” -------------------------------------------------------------------------------- £3,850/DAY + VAT @ 20% Detailed manual included. Includes up to 6 attendees. £60+VAT pp surcharge thereafter

Fully Funded Training - No Cost to You The Safe Urban Driving (SUD) course is imperative for commercial drivers regularly operating vehicles in urban settings with high volumes of vulnerable road users, including cyclists and pedestrians. The SUD training, delivered through a combination of classroom and on-cycle sessions on the same day, is accredited by Driver CPC & FORS and fully aligned with the requirements of: - Work Related Road Risk (WRRR) - Fleet Operator Recognition Scheme (FORS) Silver level - Construction Logistics and Community Safety (CLOCS) Standard Theoretical Content: - The evolving urban streetscape - Sharing the road safely with vulnerable road users - Defensive driving techniques and understanding vehicle safety equipment and its maintenance Practical Content: - Exchanging places, driver attitude, and perception - Introduction to active travel, driver fitness, and health - Hazard recognition: understanding the challenges faced by vulnerable road users This course, approved by licensed training providers for the Driver CPC, runs for seven hours in compliance with periodic training regulations. Note that the DVSA 7-hour upload is not covered by the funding, and participants will be required to make a payment of £10 per person (£8.75 upload fee and £1.25 admin in vat) on the day of training to receive this certification. Total Compliance is are nationwide Transport, Logistics and Construction Consultants & Trainers. www.totalcompliance.co.uk if you need any further information, please contact 0345 900 1312.

ABOUT THIS TRAINING COURSE The Oil & Gas E&P industry is evolving from deep sea exploration to renewable sources of energy through windfarms and solar fields offshore. In tandem, OSBs will need to evolve for sustainability and revival from stagnant traditional Supply Base Models. The changing role of OSBs is toward support services for decommissioning projects and LNG Floating Terminals. In addition, the new geographical regions of East and South Africa are coming up at a faster pace. All such operations are dependent upon a complex network of transport and supply in order to deliver the staff, materials, machinery, and crew provisions where and when needed. This 3 full-day course is curated to enhance the skills and competencies of passionate professionals to plan and organise resources, minimise turnaround time for the vessels engaged in support of Offshore E & P operations. Various hands-on exercises can equip the participants to implement viable and feasible approaches for safe and efficient management of OSBs in compliance with continuously evolving international best practices and Oil & Gas standards. This course is specially developed for investors, business owners, senior executives and professionals from the offshore & marine logistics industry, with the following objectives: 1. To provide a firm understanding about the role of an Offshore & Marine Supply Base in support of Oil & Gas E & P fleet operations, in contrast with traditional merchant shipping logistics. 2. To provide an in-depth knowledge about the range and diversity of services being offered by Offshore & Marine Supply Bases ('OSB') in the target regions. 3. To equip with the knowledge and information required for taking investment decisions when venturing in Offshore E & P Sector. 4. To introduce contemporary techniques and tools required to identify target customer segments while developing a new OSB or expanding operations of an existing OSB. 5. To elaborate comparative management methodologies for OSB facilities and services management, based on deployment of ICT solutions so as to deliver value added services to the customers. 6. To learn to identify methodologies for sales and distribution of services to the customers and non-paying users of the OSB. 7. To identify relevant state legislation for licensing & governing an OSB, and enforce through contractual obligations, rights and responsibilities of the parties as clients of an OSB. 8. To develop and implement Business Processes with built-in Performance Evaluation Metrics for achieving competitive advantage over the peers in the OSB segment. 9. To develop and implement integrated OSB's Risk Management framework. This course can also be offered through Virtual Instructor Led Training (VILT) format. Training Objectives Upon completion of this course, the participants will be able to: * Implement and comply with the QHSSSE regulations and national or Port Controls regime for safe handling of import & export cargo and movements of the vessels. * Establish role and responsibilities of the Offshore Supply Base management team. * Plan and organise resources so as to minimise turnaround time for the vessels engaged in support of Offshore E & P and Windfarms operations. * Plan and organise OSB cranes, vehicles, MHE, spaces and relevant facilities for storage, movement, and custody transfer of various types of solid and liquid cargo, tools, shackles, bulk materials in open yards and ships' gears. * Be aware of potential emergency situations and how to respond and coordinate with relevant internal and external agencies. * Manage safety of personnel of sub-contractors, stevedores', tenants, and ship crew, when engaged in OSB operations. * Differentiate between various ships, technical and functional characteristics, safety requirements and potential hazards of each operation. * Build competency in developing and maintaining documentary evidence for traceability for all works executed during the specific period or operation. * Develop techniques for performance monitoring and continuous improvements based on lessons learned from each operation at the Base as well as from reports about peers in the similar business. Target Audience This course is intended for: * Operations Management personnel from existing OSBs, Ports, Logistics & Warehouses, Offshore Fields, E & P Infrastructure Support services providers. * Professionals who are interested in OSB segment of the Offshore & Marine Oil & Gas Industry. * Participants who have no prior knowledge about OSB Operations and are new to the Offshore Logistics And highly recommended for: * Managers, Engineers, and Professionals assigned to lead new initiatives in Logistics Management of Offshore & Marine Segments of Oil & Gas Industry. Course Level * Intermediate Trainer Principal Management Consultant Chartered Valuer and Appraiser (CVA) FACICA | FAMTAC | FAIADR | M.S.I.D | Member, AIEN LL.M. (IP Law), M. Sc. (Maritime Studies), M. Tech (Knowledge Engineering), MBA, First Class CoC (MCA, UK), B. E. (Elect) Your expert course leader during the last 47 year period, has worked and consulted in the industry verticals encompassing: Technology, Oil & Gas Exploration & Production, Petrochemical Process Plants and Power Plant Construction Projects, Logistics & Warehousing, Marine, Offshore, Oil & Gas Pipelines, Infrastructure Development Projects (Ports, Offshore Supply Bases, Oil & Gas Terminals and Airports etc), EPCIC Contracts, and Shipyards, in South East Asia, Africa, Middle East, Americas and Europe. He serves as the Principal Management Consultant with a management consultancy in Hong Kong and Singapore, specialising in the fields of corporate management consultancy, international contracts reviews and alternative dispute resolutions services. He undertakes special assignments for conducting audits and valuation of intangible properties involving proprietary processes for licensed production, and licensing of intellectual property rights (IP Rights) in patents, trademarks, and industrial designs. He is frequently engaged for assignments like due diligence, acquisitions, mergers, resolving various operational issues, technology transfer and agency services contracts reviews, cost controls, and enhancement of Supply Chain Management. He has been conferred the credentials of Chartered Valuer & Appraiser (CVA) by SAC and IVAS, in accordance with the international valuation standards setting body IVSC. His consulting experience includes Charterparty Management, Business Process Re-engineering, Diversifications, Corporate Development, Marketing, Complex Project Management, Feasibility Studies, Dispute Resolutions and Market Research. He has successfully assisted Marine and offshore E & P clients in managing contractual disputes arising from various international contracts for upgrading & conversion projects. He continues to be actively engaged in claims reviews, mediation, arbitration, litigation, and expert witness related assignments, arising from international contracts and Charterparty Agreements. He graduated with a Bachelor's degree in Electrical Engineering, MBA in General Management, Master of Technology in Knowledge Engineering, Master of Science in Maritime Studies, and LL.M. (IP Law). He also holds professional qualifications in Business Valuations and Appraisers for CVA, arbitration, law, and marine engineering, including the Chief Engineer's First-Class Certificate of Competency (MCA, UK). He is further qualified and accredited as Certified International Arbitrator, Chartered Arbitrator, Sports arbitrator under CAS Rules, WIPO Neutral, Australian Communications and Media Authority (ACMA) Bargaining Code Arbitrator, Accredited Adjudicator and Accredited Mediator (Malaysia). He is admitted to the international panels of arbitrators and neutrals with WIPO, Geneva; ACICA, AMTAC and ACMA, Australia; BVIAC (British Virgin Islands); JIAC (Jamaica); HKIAC Hong Kong; AIAC, Malaysia; AIADR, Malaysia; KCAB, Seoul, South Korea; ICA, Delhi, India; ICC (Singapore); SISV, Singapore; SCMA, Singapore; SCCA, Saudi Arabia; VIAC Vienna, Austria; Thailand Arbitration Centre (THAC), and Mediator with AIAC Malaysia, CMC, and SIMI Singapore. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

OVERVIEW -------------------------------------------------------------------------------- Supply Management plays a very important role in order to maintain business harmony, maintaining good relationships, and information, having a smooth flow within the business process and delivering good customer service. The course will highlight some modern techniques of Project Management to implement in the supply management process. As research shows Project Management and Supply Management are very similar thus, we will learn the tools and techniques used to initiate, execute, execute and manage and control the project.

ABOUT THIS TRAINING COURSE  A few decades ago, the purchasing function in an Oil & Gas company was seen only as a procurement function in charge of supplying goods and services defined by the end user. Over the years, the purchasing function has won its letters of nobility and has proven to be a powerful leverage of savings and cost reduction. In the upstream Oil & Gas sector, where production sites are spread everywhere and sometimes in very isolated areas, purchasing & procurement performs an important mission to secure the supply of high-tech equipment which will travel all over the world before being installed offshore or in remote areas. These two objectives, cost saving and securing of supply, make the purchasing & procurement a strategic function and an essential segment of the supply chain as it drives the other steps in the chain.   Training Objectives By the end of the course, the participants will feel confident in their understanding of: * The supply chain functions in the upstream Oil & Gas industry and its objectives. * The purchasing process from the identification of a need to its satisfaction within the specifications, planning and budget. * The strategic tools of the buyer: The category management and market analysis, the definition of the frame agreement and contracts. * The creation of value for their organization by using the leverages of the purchasing process from the selection of supplier, the cost analysis and the negotiation. Target Audience This course is primarily designed for purchasers or head of purchasing/procurement. It is also necessary for other stake holders in the supply chain, including expediters, stock controllers and cost controllers. This course is also recommended for the participants in the logistics function who want to enlarge their knowledge domain of the supply chain. Finally, the supply chain administrators from the technical departments may also find this course necessary in order to facilitate their interaction with the purchasing department. Course Level * Basic or Foundation Trainer Your expert course leader has 25 years of experience in management positions in Contracting, Procurement and Logistics, mainly in the Oil & Gas Industry. He was a Lecturer for IFP Training for 5 years. During his Oil & Gas industry experience, he has worked on major Oil and Gas development projects like the Yadana project in Myanmar, Akpo project in Nigeria and YLNG in Yemen. His international experience allows him to adapt very easily and integrate the multicultural specificities of the Oil & Gas industry in his teaching. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

ABOUT THIS TRAINING COURSE In context of trade, seamless supply chains and dependence on international resources, world is becoming one single market. Even though because of internet and widespread access to legal resources, business managers tend to share the common legal principles, but unfortunately, the legal framework and national laws of different countries still maintain a certain degree of uniqueness and protectionism. Thus, the success of an international contract will depend on the 'know how' in identifying the differences in legal regimes, diversity of legislature, scoping, contract drafting, negotiation and execution competencies in each context. It is getting not only important but crucial to consider risks from remote and unforeseen events, sanctions, and proxy wars. As a contract gets bigger in monetary value and wider in scope, more attention is needed in drafting and interpreting terms and conditions of any contract before signing on the last page or accepting it online. This 2 full-day course endeavours to enable the participants gain an understanding of the essential ingredients of contracts and mastering the international contracting principles. This course will equip participants to identify vague and ambiguous clauses, avoid dangerous and often hidden terms, and better understand the controlling position in a project. The participants will learn from the Case Law Reports and analysis to take home lessons learned from bitter experiences of peers in the industry. It is designed to help those who need a solution to manage current contractual issues or those who execute international contracts regularly and want to be more proficient in managing their contracts and projects, with changing contexts. Training Objectives On completion of this course, the participants will have learnt: * Project management strictly in accordance with the contract and the corporate strategies * How to ensure that Variations Order claims are appropriately managed in turnkey and lump-sum contracts * Manage contemporary challenges and market factors with direct or indirect impact on the contracts * Managing all members of the Supply Chain from vendors to logistics services providers * Cost Engineering and Performance Management * How to manage Consortium Partners, Contractors and Owners representatives * When and how to obtain / grant extension of time (EOT) and costs * Ability to identify rights and obligations of each party to a contract instead of making subjective decisions * Ability to be firm in negotiations without violating the terms of the agreements * Ability to spot different legal systems, contract laws and arbitration rules * Ability to negotiate and avoid disputes and resolution in an amicable manner, in accordance with the provisions of the contract * Competency in developing and maintaining documentary evidence and traceability for all works executed during the project Target Audience This course is intended for professionals from the Oil & Gas Industry, Heavy Engineering & Construction Industries, Terminals, Shipping and Maritime Logistics Services Providers. This course is not to be missed by, especially those who are involved in Contract Management and with roles related to Contracts e.g. Commercial Managers, Engineers, Procurement Managers and Finance Managers, with a non-legal background and Para-legal executives. Course Level * Intermediate Trainer Principal Management Consultant Chartered Valuer and Appraiser (CVA) FACICA | FAMTAC | FAIADR | M.S.I.D | Member, AIEN LL.M. (IP Law), M. Sc. (Maritime Studies), M. Tech (Knowledge Engineering), MBA, First Class CoC (MCA, UK), B. E. (Elect) Your expert course leader, during the last 47 year period, has worked and consulted in the industry verticals encompassing: Technology, Oil & Gas Exploration & Production, Petrochemical Process Plants and Power Plant Construction Projects, Logistics & Warehousing, Marine, Offshore, Oil & Gas Pipelines, Infrastructure Development Projects (Ports, Offshore Supply Bases, Oil & Gas Terminals and Airports etc), EPCIC Contracts, and Shipyards, in South East Asia, Africa, Middle East, Americas and Europe. He serves as the Principal Management Consultant with a management consultancy in Hong Kong and Singapore, specialising in the fields of corporate management consultancy, international contracts reviews and alternative dispute resolutions services. He undertakes special assignments for conducting audits and valuation of intangible properties involving proprietary processes for licensed production, and licensing of intellectual property rights (IP Rights) in patents, trademarks, and industrial designs. He is frequently engaged for assignments like due diligence, acquisitions, mergers, resolving various operational issues, technology transfer and agency services contracts reviews, cost controls, and enhancement of Supply Chain Management. He has been conferred the credentials of Chartered Valuer & Appraiser (CVA) by SAC and IVAS, in accordance with the international valuation standards setting body IVSC. His consulting experience includes Charterparty Management, Business Process Re-engineering, Diversifications, Corporate Development, Marketing, Complex Project Management, Feasibility Studies, Dispute Resolutions and Market Research. He has successfully assisted Marine and offshore E & P clients in managing contractual disputes arising from various international contracts for upgrading & conversion projects. He continues to be actively engaged in claims reviews, mediation, arbitration, litigation, and expert witness related assignments, arising from international contracts and Charterparty Agreements. He graduated with a Bachelor's degree in Electrical Engineering, MBA in General Management, Master of Technology in Knowledge Engineering, Master of Science in Maritime Studies, and LL.M. (IP Law). He also holds professional qualifications in Business Valuations and Appraisers for CVA, arbitration, law, and marine engineering, including the Chief Engineer's First-Class Certificate of Competency (MCA, UK). He is further qualified and accredited as Certified International Arbitrator, Chartered Arbitrator, Sports arbitrator under CAS Rules, WIPO Neutral, Australian Communications and Media Authority (ACMA) Bargaining Code Arbitrator, Accredited Adjudicator and Accredited Mediator (Malaysia). He is admitted to the international panels of arbitrators and neutrals with WIPO, Geneva; ACICA, AMTAC and ACMA, Australia; BVIAC (British Virgin Islands); JIAC (Jamaica); HKIAC Hong Kong; AIAC, Malaysia; AIADR, Malaysia; KCAB, Seoul, South Korea; ICA, Delhi, India; ICC (Singapore); SISV, Singapore; SCMA, Singapore; SCCA, Saudi Arabia; VIAC Vienna, Austria; Thailand Arbitration Centre (THAC), and Mediator with AIAC Malaysia, CMC, and SIMI Singapore. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

ABOUT THIS TRAINING COURSE Materials Management is an essential link in the Supply Chain process. It takes an even bigger significance in the Upstream industry when the cost of a rupture in equipment or stock can be tremendous, without even considering the cost of the equipment itself. The downside may result in the accumulation of out-of-commission materials which leads to business inefficiency. What does it take to maintain efficient Materials Management? This 3 full-day course will explain more in detail. This course can also be offered through Virtual Instructor Led Training (VILT) format. Training Objectives At the end of this course, participants will be able to: * Understand the importance of an efficient Materials Management in the Supply Chain process * Examine the control and validation of Stock processes * Understand the role of the Duet and work within the Stock Duet in materials management * Learn about the key factors in Stock optimisation Target Audience This course will benefit all personnel involved in Supply Chain including Stock Controllers, Cost Controllers, Buyers, Logisticians and those from the technical department such as Technical Administrators and members of the duet. Course Level * Basic or Foundation Trainer Your expert course leader has 25 years of experience in management positions in Contracting, Procurement and Logistics, mainly in the Oil & Gas Industry. He was a Lecturer for IFP Training for 5 years. During his Oil & Gas industry experience, he has worked on major Oil and Gas development projects like the Yadana project in Myanmar, Akpo project in Nigeria and YLNG in Yemen. His international experience allows him to adapt very easily and integrate the multicultural specificities of the Oil & Gas industry in his teaching. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

ABOUT THIS TRAINING COURSE In turbulent times for the entire Energy Sector, Oil & Gas E & P segments are coming under tremendous pressure to reinvigorate. Oil Majors like Shell Plc are no longer termed as Oil & Gas Company but also branded as SHELL Energy, with technology at its forefront. The Risks, Scope and Context of Engineering, Procurement, Construction, Installation and Commissioning (EPCIC) Projects is evolving rapidly. Thus, the success of a project is dependent on the practical 'know how' in scoping, contract drafting, negotiation and execution competencies. Understanding the essential ingredients of contracts and mastering the international contracting principles will equip the participants to identify vague and ambiguous clauses, avoid dangerous and often hidden terms, and better understand the controlling position in a project. In this 3 full-day course, the participants will find out how to negotiate legacy contracts where parties are not allowed to edit any clauses during the bidding process. The participants will learn from the Case Law Reports and analysis to take home lessons learned from bitter experiences of their peers in the industry. It is designed to help those who need a solution to manage current contractual issues or those who execute contracts regularly and want to be more proficient in managing their contracts and projects, with changing contexts. The course is developed with the underlying objectives for the participants to: 1. Enhance their current knowledge of the legal principles governing international Contracts from formation, execution to breaches, redresses and dispute resolution either as a party or as a consortium member or as a coverture. 2. Manage Consortium and Joint Venture Partners inter-relationship and contractual responsibilities. 3. Identify dangerous exposures due to joint and severally liable requirements of consortium-based contracts. 4. Effectively Manage Risks of Projects, with Enforceable Contract Documents, by learning the purpose and potential benefits of maintaining evidence in compliance to the contract clauses. 5. Learn the Contract Enforcement Nuggets of Owners and the Variation Claims Strategies of the Contractors. 6. Allocation of contract management related roles / assignments and WBS within consortium partners for effective project management and profitable results. 7. Use of Contract Terms & Conditions for enhancing project performance, monitoring, reporting, and achieving timely completion, thereby avoiding delays and disputes. This course can also be offered through Virtual Instructor Led Training (VILT) format. Training Objectives Upon completion of the course, the participants will have learnt: * Project management strictly in accordance with the contract and the corporate strategies. * How to ensure that Variations Order claims are appropriately managed in turnkey and lump-sum contracts. * Manage contemporary challenges and market factors with direct or indirect impact on the contracts. * Managing all members of the Supply Chain from vendors to logistics services providers. * Cost Engineering and Performance Management. * How to manage Consortium Partners, Contractors, and Owner's representatives. * When and how to obtain / grant extension of time (EOT) and costs. * Ability to identify rights and obligations of each party to a contract instead of making subjective decisions. * Ability to be firm in negotiations without violating terms of the agreements. * Ability to spot different legal systems, contract laws and arbitration rules. * Ability to negotiate and avoidance of disputes and resolution in amicable manner, in accordance with the provisions of the contract. * Competency in developing and maintaining documentary evidence and traceability for all works executed during the project. Target Audience This course is specially curated for professionals from International Oil & Gas Industries including Offshore & Marine Sectors. They include the heads of strategic business units, contracts managers, project directors, project managers, general managers, corporate legal counsels, procurements and supply chain managers, lawyers and legal professionals engaged in the EPCIC Segments of the Oil & Gas Industry.   Course Level * Intermediate Trainer Principal Management Consultant Chartered Valuer and Appraiser (CVA) FACICA | FAMTAC | FAIADR | M.S.I.D | Member, AIEN LL.M. (IP Law), M. Sc. (Maritime Studies), M. Tech (Knowledge Engineering), MBA, First Class CoC (MCA, UK), B. E. (Elect) Your expert course leader, during the last 47 year period, has worked and consulted in the industry verticals encompassing: Technology, Oil & Gas Exploration & Production, Petrochemical Process Plants and Power Plant Construction Projects, Logistics & Warehousing, Marine, Offshore, Oil & Gas Pipelines, Infrastructure Development Projects (Ports, Offshore Supply Bases, Oil & Gas Terminals and Airports etc), EPCIC Contracts, and Shipyards, in South East Asia, Africa, Middle East, Americas and Europe. He serves as the Principal Management Consultant with a management consultancy in Hong Kong and Singapore, specialising in the fields of corporate management consultancy, international contracts reviews and alternative dispute resolutions services. He undertakes special assignments for conducting audits and valuation of intangible properties involving proprietary processes for licensed production, and licensing of intellectual property rights (IP Rights) in patents, trademarks, and industrial designs. He is frequently engaged for assignments like due diligence, acquisitions, mergers, resolving various operational issues, technology transfer and agency services contracts reviews, cost controls, and enhancement of Supply Chain Management. He has been conferred the credentials of Chartered Valuer & Appraiser (CVA) by SAC and IVAS, in accordance with the international valuation standards setting body IVSC. His consulting experience includes Charterparty Management, Business Process Re-engineering, Diversifications, Corporate Development, Marketing, Complex Project Management, Feasibility Studies, Dispute Resolutions and Market Research. He has successfully assisted Marine and offshore E & P clients in managing contractual disputes arising from various international contracts for upgrading & conversion projects. He continues to be actively engaged in claims reviews, mediation, arbitration, litigation, and expert witness related assignments, arising from international contracts and Charterparty Agreements. He graduated with a Bachelor's degree in Electrical Engineering, MBA in General Management, Master of Technology in Knowledge Engineering, Master of Science in Maritime Studies, and LL.M. (IP Law). He also holds professional qualifications in Business Valuations and Appraisers for CVA, arbitration, law, and marine engineering, including the Chief Engineer's First-Class Certificate of Competency (MCA, UK). He is further qualified and accredited as Certified International Arbitrator, Chartered Arbitrator, Sports arbitrator under CAS Rules, WIPO Neutral, Australian Communications and Media Authority (ACMA) Bargaining Code Arbitrator, Accredited Adjudicator and Accredited Mediator (Malaysia). He is admitted to the international panels of arbitrators and neutrals with WIPO, Geneva; ACICA, AMTAC and ACMA, Australia; BVIAC (British Virgin Islands); JIAC (Jamaica); HKIAC Hong Kong; AIAC, Malaysia; AIADR, Malaysia; KCAB, Seoul, South Korea; ICA, Delhi, India; ICC (Singapore); SISV, Singapore; SCMA, Singapore; SCCA, Saudi Arabia; VIAC Vienna, Austria; Thailand Arbitration Centre (THAC), and Mediator with AIAC Malaysia, CMC, and SIMI Singapore. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

ABOUT THIS TRAINING COURSE In the oil & gas industry, it is common knowledge that operators and main contractors, contract or sub-contract a wide range of their activities. The service contract is the tool used to share the risk of a service between the operator and contractor. It is also an approach adopted by the operator to control the efficiency of his contractor. This course allows all parties involved, company, contractors and subcontractors, to better understand the contractual relationship, their rights and obligations. It gives a detailed review of the contract and its main features. This course will particularly focus on the services contracts that are put in place to support a drilling campaign, covering all specificities of the various contracts. Training Objectives At the end of this course, participants will: * Get a thorough understanding of the service contract clauses * Be able to administer the contract and optimise the relationship with the company or contractor Target Audience This course will be useful and applicable for the following professionals: * contract engineers, contracts administrators, any party involved in the relationship between the company and the contractors of a service contract * Drillers and logisticians may also have interest in this course as it covers the contractual aspects of their operational activity: They are the 'Owners' of these services contracts Trainer Your expert course leader has 25 years of experience in management positions in Contracting, Procurement and Logistics, mainly in the Oil & Gas Industry. During his Oil & Gas industry experience, he has worked on major Oil and Gas development projects like the Yadana project in Myanmar, Akpo project in Nigeria and YLNG in Yemen. His international experience allows him to adapt very easily and integrate the multicultural specificities of the Oil & Gas industry in his teaching. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations