Name: Essential 5G
Price: 2367 GBP
Availability: InStock

<div fr-original-style="" style="box-sizing: border-box;">
 </div>
<section fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<h2 fr-original-style="" style="box-sizing: border-box;">About this training course</h2>
This 3-days training will provide a comprehensive review of integrity of wells exposed to carbon dioxide (CO2) in the context of Carbon Capture Utilization for enhanced oil recovery and Storage (CCUS). CO2 geological storage is a proven technology to reduce greenhouse gas emissions from sources such as coal power plants, cement kilns and steel mills. Wells are widely considered the most critical containment element, especially older wells that are not used to inject CO2 or monitor the plume evolution in the storage reservoir. The main reason for this perceived risk is the high corrosion rate of carbon steel when exposed to wet CO2, and the tendency of Portland cement to react with the gas.
The training course advanced contents build on 15 years&#39; experience in carbon storage, both in the development and deployment of technologies. First-hand, in-depth knowledge of the subject will allow us to debunk myths and focus on the real challenges of wells encountering CO2.
</div>
</section>
<section fr-original-style="" style="box-sizing: border-box;">
<div id="accordion" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Objectives 

</div>
<div id="collapseOne" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
After the completion of this training course, participants will be able to:
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Explain the CCUS market drivers</li>
<li fr-original-style="" style="box-sizing: border-box;">Examine the behavior of CO2, on surface and in the reservoir</li>
<li fr-original-style="" style="box-sizing: border-box;">Diagnose cement defects and design repairs</li>
<li fr-original-style="" style="box-sizing: border-box;">Understand the limits of Portland cement</li>
<li fr-original-style="" style="box-sizing: border-box;">Assess the benefits of different technologies and materials</li>
<li fr-original-style="" style="box-sizing: border-box;">Realize why geology is a dominant factor in cement performance</li>
<li fr-original-style="" style="box-sizing: border-box;">Critically choose the most appropriate monitoring techniques</li>
<li fr-original-style="" style="box-sizing: border-box;">Classify aging processes of cement, steel, and rock when exposed to CO2</li>
<li fr-original-style="" style="box-sizing: border-box;">Assess the risk of existing wells if they encounter the CO2 plume</li>
<li fr-original-style="" style="box-sizing: border-box;">Examine recent advances in real-time approaches to the production monitoring and lift management</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Target Audience 

</div>
<div id="collapseTwo" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
This training course is suitable and will greatly benefit:
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">All surface technical personnel such as process engineers &amp; technologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Facility engineers, production engineers &amp; technologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Drilling engineers and Well engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Design engineers and Integrity engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">P&amp;A engineers and Cementing engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Geologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Senior management executives will benefit from this training as covers an overview of the technical and commercial details of CO2 capture technologies and risks involved.</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Course Level 

</div>
<div id="collapsecl" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Intermediate</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Methods 

</div>
<div id="collapseThree" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.
Course Duration: 3 days in total (21 hours).
Training Schedule
0830 - Registration 0900 - Start of training 1030 - Morning Break 1045 - Training recommences 1230 - Lunch Break 1330 - Training recommences 1515 - Evening break 1530 - Training recommences 1700 - End of Training
The maximum number of participants allowed for this training course is 20.
This course is also available through our Virtual Instructor Led Training (VILT) format.
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Trainer

</div>
<div id="collapseFive" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
Your expert course leader is an engineer with a passion for well integrity and possesses 28 years of international experience in field operations, technology development and management in the oil &amp; gas and carbon storage sectors. Since 2018 he is program chair of the Well Integrity Technical Section of the Society of Petroleum Engineers (SPE). He is also author or co-author of 31 technical papers, a book chapter on CO2 geological storage and 7 patent applications. He delivers training on well integrity, plug and abandonment, asset integrity, risk management and QHSE across the Eastern Hemisphere, and carries out active research on harnessing geological barriers, modeling leaks through cement, and quantifying methane emissions from oil &amp; gas wells. He has extensive expertise in: Well integrity, cementing, corrosion, upstream oil &amp; gas (drilling, completion), carbon capture and storage, mathematical modeling, risk management, reliability, HSSE (health/safety/security/environment), asset integrity, management systems, sustainable development, project management, portfolio management, training, and technology development and innovation. He has personally worked on CCS projects in Europe (France, Germany, Netherlands, Norway), Algeria, Japan and USA.
Partial list of companies that have benefited from the trainer&#39;s expertise: 
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Vermilion Energy</li>
<li fr-original-style="" style="box-sizing: border-box;">Geostock</li>
<li fr-original-style="" style="box-sizing: border-box;">Aker BP</li>
<li fr-original-style="" style="box-sizing: border-box;">Shell</li>
<li fr-original-style="" style="box-sizing: border-box;">Statoil</li>
<li fr-original-style="" style="box-sizing: border-box;">ENI</li>
<li fr-original-style="" style="box-sizing: border-box;">TNO</li>
<li fr-original-style="" style="box-sizing: border-box;">Geogreen</li>
<li fr-original-style="" style="box-sizing: border-box;">Wintershall</li>
<li fr-original-style="" style="box-sizing: border-box;">Archer</li>
<li fr-original-style="" style="box-sizing: border-box;">INA and many more</li>
</ul>
Recent CCS consulting track record:
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Schlumberger</li>
<li fr-original-style="" style="box-sizing: border-box;">Total</li>
<li fr-original-style="" style="box-sizing: border-box;">Oxand</li>
<li fr-original-style="" style="box-sizing: border-box;">TNO</li>
<li fr-original-style="" style="box-sizing: border-box;">THREE60 Energy and others</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
To further optimise your learning experience from our courses, we also offer individualized &#39;One to One&#39; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. 
Request for further information post training support and fees applicable
</div>
</div>
</div><div fr-original-style="" style="box-sizing: border-box;"><div fr-original-style="" style="box-sizing: border-box;">

 </div>
<div id="collapseSeven" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
 </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

Team of 10, pp

Normal Fee, pp

Redhill

<h3>Definitive Segment Routing course description</h3>
 This Segment Routing (SR) training course is a
comprehensive program designed to equip network
professionals with the knowledge and skills needed to
implement and manage SR in modern networking
environments. Segment Routing is a cutting-edge
network architecture that enhances network flexibility,
scalability, and efficiency. This course offers in-depth
coverage of SR principles, protocols, and practical
implementation techniques. Hands on sessions are
used to reinforce the theory rather than teach specific
manufacturer equipment.

 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Explain packet paths when implementing SLB.</li>
					<li>Explain how Segment Routing works.</li>
<li>Explain the relationship between SR and MPLS.</li>
<li>Use SR for Traffic Engineering.</li>
<li>Troubleshoot Segment Routing.</li>
<li>Implement TI-LFA using Segment Routing</li>
 </ul>
 
 <h5>
 Definitive Segment Routing course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 This course is ideal for network engineers, architects, and
administrators who want to stay up-to-date with the latest
networking technologies and enhance their expertise in
Segment Routing.
 
							<li>Prerequisites:</li>
							
 Concise MPLS for engineers 
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Definitive Segment Routing course contents</h3>
 <ul>
	 
		 
<li>Introduction to Segment Routing (SR)</li>
What is SR? Source based routing, SPRING,
history, segments, why SR? SR benefits.SR usage:
Traffic Engineering, Shortest path, local protection.
Relationship between SR and MPLS, SRv6. Hands on Investigating the base network.
<li>Segment Routing architecture</li>
SR domains, SR paths, SR segments. Segment
types. Segment IDs, combining segments, IGP
extensions, control plane components. Hands on 
Configuring SR, exploring how SR works,
<li>Segment Routing protocols</li>
SR-MPLS. MPLS label stack operations. Segment
Routing Global Block (SRGB). SRLB. IS-IS and
OSPF extensions for SR. Prefix segments,
adjacency segments. SRGB/IGP interactions.
Multidomain SR policies. SPF, Strict SPF. Hands on Analysing IGP SR extension operation.
Investigating the SRGB.
<li>Segment Routing Traffic Engineering</li>
RSVP-TE versus SR-TE. SR policies. Anycast and
binding SIDs. SR flexible algorithm flex-algo,
Performance measurement delay. Hands on
Optimising network paths for various applications.
<li>SR integration with 'older' technologies</li>
MPLS and LDP integration with SR. Hands on 
Integration.
<li>Topology Independent Loop Free Alternative</li>
Classic LFA and IP/MPLS protection mechanisms.
TI-LFA protection options. Hands on TI-LFA
operation with SR and LDP traffic.
<li>Scenarios</li>
SDN. Managing SR with SR controllers. Analyse,
optimise, automate. Network slicing.
<li>BGP peering segments</li>
Path Computation Elements, BGP Link State. BGP
prefix segments, BGP peer segments. Egress peer
engineering. SR enabled VPNs. Hands onBGP
segment routing.
<li>Troubleshooting Segment Routing</li>
IP toolkit: ping and traceroute. MPLS toolkit: MPLS
ping, MPLS echo request/reply, MPLS ping, MPLS
traceroute and path discovery. Router show
commands. Hands on Used throughout the course
during exercises.
<li>SRv6</li>
Note this is an optional extra day. See our one
day SRv6 course for details. IPv6 headers review,
routing headers, IPv6 segment, SRv6 segment
Identifiers. IPv6 Segment Routing Header. SRH
procedures. Hands on Configuring SRv6,
Analysing SRv6 operation.

 </ul>

Systems & Network Training

Network & Security

Network Engineer

Definitive Segment Routing for engineers

General Admission

<div>
</div>
<section>
<div>
<h2>About this Training Course</h2>
Liquefied Natural Gas (LNG) has provided intercontinental mobility to natural gas, which now provides about 25% of the global primary energy. Being the cleanest fossil fuel, natural gas/LNG consumption is forecasted to grow in all future scenarios. With the entry of various players, including Trading companies, the LNG value chain is becoming increasingly complex, and a solid understanding of its economics and management of its interfaces have become crucial to identify and assess investment opportunities and risks.
Recent market disturbances caused by COVID-19, Oil &amp; Gas price instabilities - coupled with the political (Ukraine/Russia) challenges - make a deep understanding of LNG Value Chain Logistics and Economics even more essential to ensure the security of energy supplies sustainably and profitably.
This intermediate level 3 full-day course starts with a concise introduction to the LNG business. Thereafter, the elements of the LNG value chain are described, and their individual economics analysed. A Business Activity Model along the value chain will be developed and discussed in depth, covering the following key processes:
'Buy Gas - Transport Gas - Liquefy Gas - Sell LNG/Products - Ship LNG - Regasify LNG'
The integrated chain economics will then be developed and quantified. A hands-on group workshop/exercise developing the economic case of a full-sized Liquefaction project will be carried out, considering the forecasted cash flows throughout the project life, the location of the plant, its markets, project sensitivities and profitability assessment.
Participants will be provided with Excel based tools/models (LNG Liquefaction project development Net Present Value (NPV) analyses, Shipping Freight Calculations and Economics) to work through the exercises and also for their future personal use.
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
After the completion of this course, participants will be able to:
<ul>
<li>Understand how the LNG Value Chain operates, bound by the relevant Contracts and Agreements.</li>
<li>Learn the basic economic parameters (operating, capital costs, financing, profitability) of each major element of the value chain.</li>
<li>Appreciate the complexity of the value chain, and the associated opportunities and risks.</li>
<li>Develop quantitative project evaluation skills.</li>
<li>Explore options to maximise profitability in a given LNG value chain.</li>
<li>Discuss best practices on how to manage, steer and govern these activities.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
Technical, Operational, Shipping, Commercial, Project and Governance professionals who are already active in a specific section of the LNG Value Chain will directly benefit in developing a wider and deeper perspective on how the LNG Value Chain operations and can be optimised. Managers (Technical, Financial, Legal and Governance) less familiar with the specifics of the LNG Industry will also benefit from attending this VILT course, as they will obtain the required background to be able to set sharper targets, suitable performance indicators, and governance and performance assessment guidelines for units engaged in the chain. The course is most relevant for professionals engaged in the LNG industry at:
<ul>
<li>National and International Oil &amp; Gas/Energy Companies</li>
<li>LNG Importers/Exporters/Traders/Shippers</li>
<li>Government &amp; Regulatory Agencies</li>
<li>Finance Institutions</li>
</ul>
It will also apply to the following audience:
<ul>
<li>Business Development Managers</li>
<li>Corporate Planning Professionals</li>
<li>Project Developers</li>
<li>Supply Planners &amp; Scheduling Professionals</li>
<li>Regulators</li>
<li>Tax &amp; Finance Advisors</li>
<li>Compliance Officers</li>
<li>Equity Analyst and Bankers</li>
<li>Joint Venture Representatives, Board Directors</li>
<li>Negotiators and Contracting Staff</li>
<li>Trading Professionals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
Your expert course leader is an Oil &amp; Gas/LNG professional with more than 35 years of international experience, majority of which was gained at Shell International Joint Ventures engaged in Oil Refining, Supply / Trading, Gas Supply and LNG Businesses in the Netherlands, France, Thailand, Dominican Republic and Nigeria.
Since 2004, he has had several roles in the management of the LNG Value Chain including the Commercial Operational Management of Nigeria LNG (NLNG). He played an active role in the start-up and integration of LNG trains 4, 5 and 6 with NLNG becoming the 3rd largest LNG producer in the world in 2007. Commercial operations spanned 4 Gas Supply, 11 LNG Sales &amp; Purchase Agreements, ad-hoc LPG and Condensate Sales and LNG Ship Chartering contracts. Under his supervision, more than 2,000 LNG cargoes were exported. He was part of the organizational transformation of the company from a Project-based set-up to a Production / Commercial based structure and implemented an 'Integrated Planning and Scheduling Department' in which he optimized the value chain (Buy-Gas - Liquify Gas to LNG - Sell - Ship LNG). Staff competence management was one of his focus areas during this period. He was also the NLNG representative on JV Technical, Commercial, Shipping Committees where he interfaced with Government &amp; Regulatory authorities.
In 2014, he was appointed as Shell Shareholder representative to NLNG and became a Non-Executive Board member to NLNG companies, including Bonny Gas Transport (BGT) managing 24 LNG Ships. During this period, he was involved in the Economic and Technical steering of the Shipping Fleet and Liquefaction Plant Rejuvenation projects and a further capacity expansion of liquefaction plant which resulted in the achievement of NLNG train 7 project FID in 2019.
Since 2016, he has been active as an independent consultant. He co-authored 2 patents and more than 30 published papers/presentations. He holds a PhD from Delft University of Technology in the Netherlands and a MSc and BSc in Chemical Engineering from the University of Birmingham, UK.
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. 
Request for further information post training support and fees applicable
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
 </div>
</div>
</div>
</div>
</section>

LNG Value Chain & Economics - Optimise Your LNG Projects and Supply Strategies

<h3>Total QoS training course description</h3>
 An advanced technical hands on course focusing on
Quality of Service issues in IP networks.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Explain the difference between Integrated services and differentiated services.</li>
										<li>Explain how DiffServ works.</li> 
										<li>Explain how RSVP works. </li>
										<li>Design networks supporting QoS.</li>
 </ul>
 <h5>
 Total QoS training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Network administrators. 
 Network operators. 
 
							<li>Prerequisites:</li>
							
 TCP/IP Foundation for engineers
 
							<li>Duration</li>
							
 3 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Total QoS training course contents</h3>
			<ul>	<li>What is QoS</li>
QoS and CoS, throwing bandwidth at the problem,
Best effort services, Differentiated services,
Integrated services, guarantees, the need for QoS,
IETF working groups.
				<li>Application issues</li>
Video, Voice, other applications, Jitter, delay,
packet loss. Flows, per flow and per aggregate
QoS, Stateful vs. stateless QoS, applications vs.
network QoS.
<li>'Traditional' IP QoS</li>
The TOS field and precedence, the obsolete
OSPF use of the TOS field, TCP congestion
avoidance.
<li>Queuing</li>
Where to use queuing, FIFO, Priority queuing,
Custom queuing, Weighted Fair Queuing,
CBWFQ, PQWFQ, LLQ, RED and WRED.
<li>DiffServ</li>
Architecture, DSCP, CU, packet classification and
marking, meters and conditioners, Bandwidth
brokers and COPS, Per Hop Behaviours, best
effort PHB, Assured Forwarding PHB, Expedited
forwarding PHB, Network Based Application
Recognition (NBAR).
<li>Layer 2 issues</li>
Fragmentation and interleaving, compression
(codecs, MPEG formats, header compressionâ¦),
802.1p, Subnet bandwidth management,
Bandwidth allocators and requestor modules, the
use of MPLS, traffic engineering, traffic shaping.
<li>RSVP</li>
What is RSVP? architectures, paths, path
messages, reservations, traffic specifications, tear
downs, guaranteed and controlled load, token
buckets, Call Admission Control in voice
networks, gatekeepers.
	<li>Other issues</li>
Policy based routing, the Resource Allocation
Protocol, QoS management tools, baselining
networks, design issues, QoS in IPv6, QoS and
	multicasts.
				</ul>

Total QoS for engineers

<h3>MPLS training course description</h3>
 A hands-on introduction to MPLS covering the basics of what MPLS is and how to configure it, through to more advanced concepts such as MPLS VPNs and traffic engineering with MPLS.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Describe MPLS</li>
<li>Explain how MPLS works</li>
<li>Describe the interaction between OSPF/IS-IS/BGP and MPLS</li>
<li>Describe MPLS traffic engineering</li> 
 </ul>
 <h5>
 MPLS training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone working with MPLS.
 
							<li>Prerequisites:</li>
							
 IP Routing 
 BGP
 
							<li>Duration</li>
							
 3 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>MPLS training course contents</h3>
 <ul>
 <li>What is MPLS?</li>
 
 What does MPLS stand for? What is MPLS? Core
MPLS, MPLS and the 7 layer model, MPLS is a
protocol, MPLS is a standard, MPLS runs on
routers, MPLS history, Why MPLS? For service
providers, For enterprises. 
 <li>MPLS Architecture
</li>
 Label Switch Routers, two types of LSR, PE and
P router roles, FEC, swapping labels, MPLS
packet format, Loops, TTL control. Hands on:
Building the base network. Enabling MPLS.
					Simple testing and troubleshooting of MPLS.
 <li>Label distribution</li>
 Label review, label switch path, label distribution
methods, piggybacking, Label distribution
Protocols, LDP, LDP operation, LDP packets,
discovery messages, session messages,
advertisement messages, notification message,
Label Information Base, routing tables, the LFIB,
MPLS forwarding, penultimate hop popping,
handling labels, LSP control modes, when to
distribute labels, how long to keep labels,
aggregation, label merging. Hands on: LDP traffic
analysis.
 <li>MPLS TE and QoS</li>
 What is MPLS TE? Why TE? TE versus shorted
path, how MPLS TE works, CR-LDP, OSPF-TE,
IS-IS-TE, TE with BGP, RSVP-TE, MPLS Fast
reroute, MPLS QoS. Hands on: Enabling
MPLS-TE.
 <li>BFD</li>
 BFD, hello the BFD protocol.
				<li>MPLS VPN</li>
				What is a VPN? MPLS VPN types, MPLS VPN
comparison, MPLS L3 VPN, VRFs, MBGP, MPLS
VPN architecture, VRF RD, VRF RT, the label
stack, L2 VPNs, VPWS, AToM, VPLS. Hands on:
MPLS L3 VPN setup, troubleshooting.
 
 </ul>

Concise MPLS for engineers

<h3>Complete JavaScript training course description</h3>
 A hands on course covering JavaScript programming.
Core JavaScript is covered first, including the basics,
arrays, functions, classes, modules and Regular
expressions. Client side JavaScript is then covered
including JavaScript in browsers, Scripting CSS, the
jQuery library and HTML APIs.
 
				<h5>What will you learn</h5>
				<ul>
				 
	 
 
 <li>Read JavaScript.</li>
				 	 <li>Write JavaScript.</li>
 <li>Debug JavaScript.</li>
 </ul>
 <h5>
 Complete JavaScript training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone wishing to learn JavaScript.
 
							<li>Prerequisites:</li>
							
 None.
							
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Complete JavaScript training course contents</h3>
 <ul>
				<li>CORE JAVASCRIPT </li>
<li>Lexical structure: </li>
Character set, comments, literals, identifiers, and reserved words, optional semicolons..

<li>Types, values and variables: </li>
Numbers, text, boolean values, null and undefines, the global object, wrapper objects, immutable primitive values and mutable object references, type conversions, variable declaration, variable scope.

<li>Expressions and operators: </li>
Primary expressions, object and array initializers, function definition expressions, property access expressions, invocation expressions, object creation expressions, operator overview, arithmetic expressions, relational expressions, logical expressions, assignment expressions, evaluation expressions, miscellaneous operators.

<li>Statements: </li>
Expression statements, compound and empty statements, declaration statements, conditionals, loops, jumps, miscellaneous statements, summary of JavaScript statements.

<li>Objects: </li>
Creating objects, querying and setting properties, deleting properties, testing properties, enumerating properties, property getters and setters, property attributes, object attributes, serializing objects, object methods.

<li>Arrays: </li>
Creating arrays, reading and writing array elements, sparse arrays, array length, adding and deleting array elements, iterating arrays, multi-dimensional arrays, array methods, FCMAScript 5 array methods, array type, array-like objects, strings as arrays.

<li>Functions: </li>
Defining functions, invoking functions, function arguments and parameters, functions as values, functions as namespaces, closures, function properties, methods and constructor, functional programming.

<li>Classes and modules: </li>
Classes and prototypes, classes and constructors, Java-style classes in JavaScript, augmenting classes, classes and types, object oriented techniques in JavaScript, subclasses, classes in ECMAScript 5, modules.

<li>Pattern matching and regular expressions: </li>
Defining regular expressions, string methods for pattern matching, the RegExp object.

<li>JavaScript subsets and extensions: </li>
JavaScript subsets, constants and scoped variables, destructuring assignment, iteration, shorthand functions, multiple catch clauses, E4X: ECMAScript for XML.

<li>Server-side JavaScript: </li>
Scripting Java with Rhino, asynchronous I/O with node.


<li>CLIENT SIDE JAVASCRIPT </li>
<li>JavaScript in web browsers:</li>
Client side JavaScript, embedding JavaScript in HTML, execution of JavaScript programs, compatibility and interoperability, accessibility, security, client side frameworks.

<li>The Window object: </li>
Timers, browser location and navigation, browsing history, browser screen information, dialog boxes, error handling, document elements as window properties, multiple windows and frames.

<li>Scripting Documents: </li>
Overview of the DOM, selecting document elements, document structure and traversal, attributes, element content, creating, inserting and deleting nodes. Example: generating a table of contents, document and element geometry and scrolling, HTML forms, other document features.

<li>Scripting CSS: </li>
Overview of CSS, important CSS properties, scripting inline styles, querying computed styles, scripting CSS classes, scripting stylesheets.

<li>Handling events: </li>
Types of events, registering event handlers, event handler invocation, document load events, mouse events, mousewheel events, drag and drop events, text events, keyboard events.

<li>Scripted HTTP: </li>
Using XMLHttpRequest, HTTP by &lt;script&gt;: JSOMP, Comet with server-sent events.

<li>The jQuery library: </li>
jQuery basics, jQuery getters and setters, altering document structure, handling events with jQuery, Animated effects, Ajax with jQuery, Utility functions, jQuery selectors and selection methods, Extending jQuery with plug-ins. The jQuery UI library. Client side storage: localStorage and sessionStorage, Cookies, IE usingData persistence, Applicatioin storage and offline webapps.

<li>Scripted media and graphics: </li>
Scripting images, Scripting audio and video, SCG:scalable vector graphics, Graphics in a &lt;canvas&gt;.

<li>Scripted HTTP: </li>
Using XMLHttpRequest, HTTP by &lt;script&gt;: JSOMP, Comet with server-sent events.

<li>The jQuery library: </li>
jQuery basics, jQuery getters and setters, altering document structure, handling events with jQuery, Animated effects, Ajax with jQuery, Utility functions, jQuery selectors and selection methods, Extending jQuery with plug-ins. The jQuery UI library.

<li>Client side storage: </li>
localStorage and sessionStorage, Cookies, IE usingData persistence, Applicatioin storage and offline webapps.

<li>Scripted media and graphics: </li>
Scripting images, Scripting audio and video, SCG:scalable vector graphics, Graphics in a &lt;canvas&gt;.

<li>HTMLS APIs: </li>
Geolocation, history management, cross-origin messaging, web workers, type arrays and ArrayBuffers, blobs, the filesystem API, client side databases, web sockets.
			
 </ul>

Complete JavaScript

<h3>SMTP training course description</h3>
 A hands on course focusing on the workings of email systems and the standard protocols that they use. The course is not specific to any particular implementation, but some vendor specifics are noted. Linux and Microsoft machines are used in hands on sessions to reinforce the theory of major sessions. The course concentrates on troubleshooting and interworking using network sniffing and protocol inspection rather than "which
buttons to push". 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Describe and explain
 
 	 SMTP 
 MIME 
 POP3 
 IMAP 
 PGP, GPG, S/MIME 
 SPF, DKIM, DMARC</li>
 
					<li>Configure mail routing</li>
					<li>Secure email systems </li>
 </ul>
 
 <h5>
 SMTP training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Technical staff responsible for email systems.
 
							<li>Prerequisites:</li>
							
 TCP/IP foundation for engineers.
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>SMTP training course contents</h3>
 <ul>
				<li>SMTP architecture</li>
What is SMTP, email before SMTP, SMTP history,
the different protocols, clients, servers. Email
composition, transmission, delivering emails,
storing and reading emails. MUAs, MTAs, POP3,
IMAP, SMTP, DNS, webmail.
 Hands on Setting up MTAs and MUAs
and sending a simple email using telnet.
<li>The SMTP protocol</li>
SMTP protocol stack, SMTP headers, HELO,
SMTP mail, MAIL FROM, RCPT TO, DATA,
SMTPUTF8, 8BITMIME, TURN, EHLO, ETRN, 3
digit replies.
 Hands on Analysing SMTP packets on a
network.
<li>DNS and SMTP</li>
SMTP forwarding, SMTP relays, interoperation,
how SMTP uses DNS, MX records.
 Hands on Setting up mail relays.
<li>SMTP headers</li>
IMF data, From, to, cc, bcc, sender and recipient
headers, message Ids, received trails, in-reply-to,
received-SPF, mail list headers.
 Hands on Using clients to analyse
details from mail headers, including true
originators and path of emails.
<li>MIME</li>
Email attachments, MIME versions, content type
headers, encoding, base 64, binary data, multi
part headers, troubleshooting attachments.
 Hands on Analysing MIME headers and
attachments.
<li>POP3</li>
What is POP3, where to use POP3, authorisation,
transactions, POP3 commands: USER, PASS,
STAT, LIST, RETR, DELE.
 Hands on Setting up a POP3 server,
analysing POP3 packets on a network.
<li>IMAP and IMAPS</li>
What is IMAP, where to use IMAP, authorisation,
mailbox structure, IMAP commands: LOGIN,
AUTHENTICATE, LIST, CREATE, Examine
(message flags), SELECT, STORE.
 Hands on Setting up an IMAP server
and analysing IMAP packets on a network.
<li>Interoperation</li>
Mail gateways, addressing, Exchange, sendmail.
<li>Email security</li>
Basics, Transport level: STARTTLS. Content:
PGP/GPG, mail signing and encryption, S/MIME,
digital certificates, secure email submission.
 Hands on Setting up and using a PGP
key, configure MTAs to use TLS.
<li>Email authentication and spam prevention</li>
Mail relays, grey listing, block list &amp; RBL, DNSBL
(Real-time Black hole List), White list, SPF,
Domain Keys Identified Mail (DKIM), Author
Domain Signing Practices (ADSP), Abuse Report
Format (ARF), Domain-based Message
Authentication, Reporting and Conformance
(DMARC).
 Hands on Relay spamming and the
blocking spamming.

 </ul>

Total SMTP and email for engineers

<h3>Junos Operating System training course description</h3>
 This course provides students with the foundational
 knowledge required to work with the Junos OS and to
 configure Junos devices. The course provides a brief
 overview of the Junos device families and discusses
 the key architectural components of the software. The
 course then delves into foundational routing knowledge
 and configuration examples including general routing
 concepts, routing policy, and firewall filters. Delegates
 will gain experience in configuring and monitoring the
 Junos OS and monitoring basic device operations. This
 course is based on Junos OS Release 15.1X49.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Describe the design architecture of the Junos OS.</li>
 <li>Navigate within the Junos CLI and perform tasks
 within the CLI operational and configuration modes.</li>
 <li>Configure and monitor network interfaces.</li>
 <li>Navigate within the Junos J-Web interface.</li>
 <li>Identify where you might use firewall filters.</li>
 <li>Explain basic routing operations and concepts.</li>
 <li>Identify key factors in Juniper Networks' security.</li>
 </ul>
 <h5>
 Junos Operating System training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 This course benefits individuals responsible for
 configuring and monitoring devices running the Junos
 OS.
 
							<li>Prerequisites:</li>
							
 TCP/IP foundation for engineers
 
							<li>Duration</li>
							
 3 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Junos Operating System training course contents</h3>
 <ul>
 <li>Junos Operating System Fundamentals </li>
 The Junos OS 
 Traffic Processing 
 Overview of Junos Devices 
 <li>User Interface Options-The Junos CLI </li>
 User Interface Options 
 The Junos CLI: CLI Basics 
 The Junos CLI: Operational Mode 
 The Junos CLI: Configuration Mode 
 <li>User Interface Options-The J-Web Interface </li>
 The J-Web GUI 
 Configuration 
 Lab 1: User Interface Options 
 <li>Initial Configuration </li>
 Factory-Default Configuration 
 Initial Configuration 
 Interface Configuration 
 Lab 2: Initial System Configuration 
 <li>Secondary System Configuration </li>
 User Configuration and Authentication 
 System Logging and Tracing 
 Network Time Protocol 
 Archiving Configurations 
 SNMP 
 Lab 3: Secondary System Configuration 
 <li>Operational Monitoring and Maintenance </li>
 Monitoring Platform and Interface Operation 
 Network Utilities 
 Maintaining the Junos OS 
 Password Recovery 
 System Clean-Up 
 Lab 4: Operational Monitoring and Maintenance 
 <li>Interface Configuration Examples </li>
 Review of the Interface Configuration Hierarchy 
 Interface Configuration Examples 
 Using Configuration Groups 
 <li>Routing Fundamentals </li>
 Routing Concepts: Overview of Routing 
 Routing Concepts: The Routing Table 
 Routing Concepts: Routing Instances 
 Static Routing 
 Dynamic Routing 
 Lab 5: Routing Fundamentals 
 <li>Routing Policy </li>
 Routing Policy Overview 
 Case Study: Routing Policy 
 Lab 6: Routing Policy 
 <li>Firewall Filters </li>
 Firewall Filters Overview 
 Case Study: Firewall Filters 
 Unicast Reverse-Path-Forwarding Checks 
 Lab 7: Firewall Filters 
 <li>Class of Service </li>
 CoS Overview 
 Traffic Classification 
 Traffic Queueing 
 Traffic Scheduling 
 Case Study: CoS 
 Lab 8: Class of Service 
 <li>JTAC Procedures </li>
 Opening a Support Case 
 Customer Support Tools 
 Transferring Files to JTAC 
 <li>Juniper Security Concepts </li>
 Security Challenges 
 Juniper's Security Focus 
 <li>Appendix A: IPv6 Fundamentals </li>
 IPv6 Addressing 
 Protocols and Services 
 Configuration
 </ul>

Introduction to the Junos Operating System

<h3>Total IP multicast training course description</h3>
 
 This training course provides an advanced three day hands on study of IP multicast technology focusing on architectures, applications and protocols. All aspects of IP multicasting are covered including PC, server and switch implementations. Design, configuration, support and troubleshooting are all covered in the course. Hands on sessions are used to reinforce the theory rather than teach specific implementations.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Design multicast networks.</li>
																				<li>Explain how multicast networks work.</li> 
																				<li>Compare and contrast the different multicast routing protocols, such as DVMRP, PIM, MBGP and SSM. </li>
																				<li>Configure PCs, servers, switches and routers for multicasting.</li> 
					<li>Configure multicast routing protocols including: 
 PIM Dense Mode. 
																				PIM Sparse Mode 
																				BGP 
																				SSM 
 Troubleshoot multicast networks.</li>
 </ul>
 <h5>
 Total IP multicast training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Technical staff working with IP multicasts. 
 
							<li>Prerequisites:</li>
							
 TCP/IP Foundation for engineers
 
							<li>Duration</li>
							
 3 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Total IP multicast training course contents</h3>
				<ul>	<li>Introduction</li>
What is multicasting? Why multicast? Why not
multicast? Multicasting vs. multiple unicasts,
Multicasting vs. broadcasts, multicasting
applications, the use of unicast addressing for
setting up multicast applications, multicast use
within standard protocols such as OSPF. hands on
Example multicast applications.
					<li>Addressing</li>
Layer two multicast addresses, Class D addresses,
mapping layer 3 addresses onto layer 2 multicast
addresses. Multicast addresses on NBMAs,
scoping multicast traffic, Multicast address blocks,
GLOP, IPv6 and multicasting, anycasting. hands on
Multicast addressing.
<li>Multicast architectures</li>
Where the different protocols are used, PC to
router, router to router, how switches can get
involved. hands on Analysing multicast packets.
<li>PC to router</li>
Configuring Class D addresses, IGMP, packet
formats, queries, reports, maintaining groups,
enhancements to IGMP (v2 and v3), Leaving a
group, querier elections, hands on Analysing IGMP
packets.
<li>Switches and multicasting</li>
Controlling multicast traffic with switches, VLANS,
static bridge table entries, IGMP snooping, CGMP.
 hands on Configuring switches for multicast
environments.
<li>Router to router</li>
MOSPF, DVMRP, PIM Sparse Mode, PIM Dense
Mode, MBGP. hands on Simple router configuration for
multicasting.
<li>Theory behind multicast routing protocols</li>
Distribution trees, source distribution trees, shared
trees, core based trees. Reverse path forwarding,
Multicast routing protocol types. PIM DM:
Flooding, pruning, PIM designated routers, hands on
configuring PIM DM.
<li>PIM Sparse mode</li>
Rendevous points, discovering RPs, hands on
Configuring PIM SM, using different protocols for
different groups. PIM SM with one RP, using
multiple RPs, Auto RP.
<li>MBGP</li>
Multiprotocol routing, how does MBGP work? How
MBGP carries multiple protocol information, MBGP
and multicasts, MBGP and IPv6. hands on Configuring
MBGP for multicasts.
	<li>Internet multicasting</li>
The internet, ISPs, the MBone, tunnelling, Inter
domain multicasting, the role of MBGP, Inter
domain problem, MSDP, MSDP operation SSM,
PIM-SM and shared trees, SSM, PIM-SSM
operation, SSM benefits. hands on MSDP
configuration. SSM configuration.
				</ul>

Total IP multicast for engineers

<h3>Essential 5G training course description</h3>
 This course is designed to give delegates an
explanation of the technologies and interworking
requirements of the next generation of cellular
communications.
It is not a definitive set of descriptions but a possibility
of the final deployment. we will investigate the 10 pillars
for 5G which will include various Radio Access
Technologies that are required to interwork smoothly.
We will look at the 4G Pro features and other RATs.
 
				<h5>What will you learn</h5>
				<ul>
				 
			
 <li>List the ten pillars of 5G deployment.</li>
 <li>Describe the 5G Internet.</li>
 <li>Explain virtualization and RAT virtulization.</li>
 <li>Describe Software Defined Networks (SDN).</li>
																				<li>Explain carrier aggregation.</li>
 <li>Describe the mobile cloud.</li>
																				<li>Explain an overall picture of 5G architecture.</li>
 </ul>
 <h5>
 Essential 5G training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone looking for an understanding of the technologies
and interworking requirements of the next generation of
cellular communications.
 
							<li>Prerequisites:</li>
							
 None.
							
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Essential 5G training course contents</h3>
 <ul>
				<li>Drivers for 5G </li>
5G Road Map, 10 Pillars of 5G, evolving RATs, oSON, MTCm, mm-wave, backhaul, EE, new spectrum, spectrum sharing, RAN virtualisation.

<li>4G LTE Advanced </li>
MIMO technology in release 8, Downlink &amp; uplink MIMO R8, MIMO technology in LTE advanced, Downlink 8-layer SU-MIMO, Downlink MU-MIMO, Uplink MU-MIMO, Uplink transmit diversity, Coordinated multi-point operation (CoMP), Independent eNB &amp; remote base station configurations, Downlink CoMP.

<li>ICIC &amp; eICIC </li>
ICIC, Homogeneous to heterogeneous network evolution, Introduction to eICIC, Macro-pico scenario, Macro-femto scenario, Time orthogonal frequencies. Almost Blank Subframe (ABS).

<li>Carrier aggregation </li>
Component carriers (CC), CC aggregation deployments, Intra-band contiguous solutions, Intra-band non-contiguous solutions, Inter-band non-contiguous solutions, CA bandwidth classes, Aggregated transmission bandwidth configurations (ATBC), Possible carrier aggregation configs.

<li>eIMTA </li>
TDD UL-DL reconfig. for traffic adaptation, Reconfig. mechanisms, Interference mitigation schemes, Dynamic &amp; flexible resource allocation.

<li>5G architectures </li>
5G in Europe, horizon 2020 framework, 5G infrastructure PPP, METIS project, 5G in North America, academy research, company R&amp;D, 5G specifications.

<li>The 5G internet </li>
High-level view of Cloud Services, The Internet of Things &amp; context awareness, Network reconfiguration &amp; virtualization support, server proliferation, how VMs fix underutilised server problem, enter the hypervisor, why are VM such a big deal? SDN, evolution of the data centre network, high availability, low latency, scalability, security, cost model explodes, service-oriented API. OpenFlow switches, OpenFlow controllers, how SDN works. The big picture, pulling it all together, why the network had to change, how SDN &amp; NFV tie together. Evolutionary approach to the internet, architectures for distributed mobility management, MEDIEVAL &amp; MEDIVO projects, a clean slate approach, mobility first architecture. VNet, INM, NetInf, ForMux, MEEM. Generic Path (GP) &amp; anchorless mobility (AM), Quality of Service support, network resource provisioning, resourcing inside a network. IntServ, RSVP, DiffServ, CoS. Emerging approach for resource over- provisioning, example use case architecture for scalable resource control scenarios in the 5G internet. Integrating SDN/NFV for efficient resource over-reservation control, control information repository, service admission control policies, network resource provisioning, control enforcement functions, network configurations &amp; operations.

<li>Small cells for 5G </li>
Average spectral efficiency evolution, WiFi &amp; Femto cells, Capacity limits. Achievable gains with densifications, multi-antenna techniques, small cells. Mobile data demand, approach &amp; methodology, subscriber density and traffic demand projections to 2020. Demand versus capacity, global mobile data traffic increase modelling, country level backhaul traffic projections, Small cell challenges, backhaul, spectrum, automation.

<li>Cooperation for next gen wireless networks </li>
Diversity &amp; relaying strategies, cooperation &amp; network coding, ARQ &amp; MAC protocols, NCCARQ &amp; PRCSMA packet exchange, Physical layer impact on MAC protocol analysis, NCCARQ overview, PHY layer impact, Case study on NCCARQ.

<li>Mobile clouds </li>
Mobile cloud, Mobile cloud enablers, mobile user domain, wireless technologies, WWAN WLAN and WPAN range, Bluetooth, IEEE.802.15.4 &amp; software stacks, infrared, near field communications (NFC). Network coding, store &amp; forward vs compute &amp; forward, linear network coding, random linear coding.

<li>Security for 5G communications </li>
Potential 5G communication systems architectures, Security issues &amp; challenges. Mobile malware attacks targeting the UE, 5G mobile botnets, access networks, attacks on 4G networks, C-RNTI &amp; packet sequence number based UE location tracking, false buffer status reports attacks, message insertion attacks, HeNB attacks, physical attacks, credential attacks, configuration and protocol attacks, attacks on MON, user data &amp; identity attacks, mobile operator's core network, DDoS attacks targeting MON, signalling amplification, HSS saturation, external IP networks.
 </ul>

Essential 5G

Elevate your auditing expertise and lead the way in quality management with our ISO 9001:2015 Lead Auditor course, certified by CQI and IRCA. This comprehensive program is designed for professionals seeking to conduct first, second, and third-party audits of Quality Management Systems (QMS) against the ISO 9001:2015 standard.
Our course provides in-depth training on the principles and practices of auditing, equipping you with the knowledge and skills to effectively lead audit teams and assess the conformance and effectiveness of QMS in organizations. You will learn how to plan, conduct, report, and follow up on audits in compliance with ISO 19011 guidelines and ISO/IEC 17021 standards.
Key Features of the Course:
Certified Expertise: Achieve a globally recognized certification from CQI and IRCA, enhancing your professional credibility and career prospects.
Experienced Instructors: Learn from industry experts with extensive experience in quality management and auditing, who provide real-world insights and practical guidance.
Interactive Learning: Engage in hands-on exercises, case studies, and role-play scenarios that simulate real auditing situations, ensuring that you can apply what you learn directly to your work.
Comprehensive Curriculum: Cover all aspects of the ISO 9001:2015 standard, audit principles, and techniques, as well as risk-based thinking and the process approach.
Career Advancement: This course is ideal for those aspiring to become lead auditors, quality managers, or consultants, offering a pathway to new opportunities and enhanced professional status.
Upon successful completion of the course and examination, you will be awarded the prestigious CQI and IRCA certification, recognized globally as a mark of excellence in auditing. This certification will enable you to conduct audits for certification bodies and help organizations achieve compliance and continual improvement.
Enroll in our ISO 9001:2015 Lead Auditor course today and take the next step in your journey to becoming a leader in quality management.

QUALITY ACADEMY

Quality Management System

ISO 9001

Quality Management

Quality Assurance

Quality Auditor

Become a certified ISO 9001:2015 Lead Auditor with our CQI and IRCA accredited course. Gain the skills to lead quality management audits and enhance your career. Enroll now!

ISO 9001:2015 Lead Auditor (CQI and IRCA Certified)

Bournemouth

London Waterloo Academy

Dental Nurse

Dental Assistant

VIRTUAL DENTAL NURSING DIPLOMA

Registration Fee

Tuition Fee

Exam Fee

One Day Introduction Course

This course, worth 30 hours of verifiable CPD, will demonstrate your ability to grade and reflect upon your impression technique and demonstrate competence to take impressions unsupervised under prescription.<img src="https://cavitytraining.co.uk/app/uploads/2023/11/cpdmember.png" alt="CPD member" width="162" height="149" srcset="https://cavitytraining.co.uk/app/uploads/2023/11/cpdmember.png 397w, https://cavitytraining.co.uk/app/uploads/2023/11/cpdmember-300x276.png 300w, https://cavitytraining.co.uk/app/uploads/2023/11/cpdmember-320x294.png 320w" sizes="(max-width: 162px) 100vw, 162px" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"> <hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;">Learn about the Cavity Training Impression Taking CourseThe course is suited to nurses who aspire to treat patients directly and to take impressions or scan for impressions under the prescription of a registered dentist or clinical dental technician.To enrol, you must be GDC-registered, work in surgery and hold indemnity insurance. (extended duties) You will need a GDC registered dental professional able and willing to supervise you.You also need to complete an Anaphylaxis Awareness course &ndash; we offer a free CPD course for this.<div fr-original-style="" style="box-sizing: border-box;"> </div><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;">Frequently Asked Questions How long is the course?The course duration is 2 to 6 months. When are the classes held?You will attend a live webinar class for two Saturday mornings. Is there an exam at the end?There is no exam at the end, you need to successfully complete 24 assessments with your practice mentor and a complete a 500 word dissertation. What qualifications do I need to start the course?Preferable English and Maths level 4 and above, you must also be GDC registered. What opportunities for progression is there?This qualification allows candidates to further progress onto various post registration qualifications or career opportunities, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">The Certificates in Orthodontic Nursing</li><li fr-original-style="" style="box-sizing: border-box;">Extending a career in prosthetics.</li><li fr-original-style="" style="box-sizing: border-box;">Training as a Lab Technician</li></ul> <hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><article style="color: rgb(28, 28, 28); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(28, 28, 28);"><article style="color: rgb(28, 28, 28); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(28, 28, 28);"><h3 style="color: var(--color-heading-text); box-sizing: border-box;" fr-original-style=" color: var(--color-heading-text);">Course Dates</h3><ul style="color: var(--color-body-text); box-sizing: border-box;" fr-original-style=" color: var(--color-body-text);"><li fr-original-style="" style="box-sizing: border-box;">13th - 27th April 2024 9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;">11th - 25th May 2024 9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;">8th - 22nd June 2024 9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;">13th - 27th July 2024 9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;">3rd - 17th August 2024 9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;">7th - 21st September 2024 9:30am - 1:30pm</li></ul></article><article style="color: rgb(28, 28, 28); box-sizing: border-box;" fr-original-style=" color: rgb(28, 28, 28);"><h3 style="color: var(--color-heading-text); box-sizing: border-box;" fr-original-style=" color: var(--color-heading-text);">Costs</h3>&pound;180.00 per person (inc. VAT)Please choose from one of the course dates above. Each course is 2 days. The dates above indicate the 2 days of the course.</article></article><article style="color: rgb(28, 28, 28); box-sizing: border-box;" fr-original-style=" color: rgb(28, 28, 28);"> </article>

Cavity Dental Training

Advanced Certificate in Impression Taking including Intra Oral Scanning

Brighton

Southend on Sea

Rotherham

Manchester

Slough

Portsmouth

Bingley

Nottingham

Paisley

Birmingham

Luton

Northampton

Bedford

Liverpool 

Swansea

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (Foundation Degree Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M00 - Introduction:
Learning outcomes, Assumptions and Overview.
M01 - Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to
the advanced course.
M02 - Aspirated and Vacuated Systems:
Open systems (Syringe & Needle), closed systems (Vacutainer & Monovette), Alternative closed systems, Using Monovette - aspiration and evacuated techniques, monovette adapter systems.
M03 - Specialised and Advanced Phlebotomy Equipment:
The centrifuge - overview. Safe operation and use. Managing a centrifuge breakage or spillage.
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at
0 degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
M04 - Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC tests. Roles for phlebotomists performing POC Tests.
M05 - Neonates and Children:
Sample collection from new-born to pre-adult. A detailed overview of legal principles of law including child consent and child protection for phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedures including
microtainers, lancets and capillary tube collection. Detailed heel prick procedure. Paediatric finger prick collection. The life-threatening hazard of over-collecting. Communication techniques in differing age bands.
Consent and the law. Basic principles of lawful consent for neonates and paediatric patients. Child protection.
Detailed analysis of neonatal and paediatric blood collection including Guthrie card collection. Neonatal bottles - colours and tests. Paediatric blood gases collection.
Butterfly needles - when to use. Blood tests during pregnancy. Neonatal blood screening - nine conditions covered. Bilirubin in neonates.
M06 - Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin changes and venepuncture implications. A profile of common
geriatric blood tests. Age related problems. Procedural precautions.
M07 - Special Procedures:
Drawing blood from back of hand. Drawing blood from lower limb veins. Managing the unwilling or difficult patient. Managing the psychiatric patient. Managing the isolated patient. Non-routine blood tests. Managing the latex allergy patient (type 1 and type 4 reactions). Latex indicators. Sample handling - non-routine procedures. Drug trials and research projects.
M08 - Special Tests and Sample Handling Procedures:
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group - collection notes, analytic time, optimal collection time and notes for each group.
M09 - Advanced Phlebotomy Tasks:
Additional procedures. Maintaining POC equipment. Stock control and stock rotation. Quality control. Data entry. Product evaluation. Training and competency evaluation.
M10 - Alternative Environments:
A step-by-step look at non-clinical phlebotomy environments including private testing, DEFRA, forensic and police, cord blood collection, DNA analysis, veterinary services, overseas and volunteering.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM)
MORNING , AFTERNOON OR EVENING SESSION:

1 - Welcome, introductions and overview:
- Classroom - health & safety briefing, schedule overview.
- Virtual Classroom - audio/visual checks and registration. Unpacking and overview of your training kit.
2 - Syringe and Needle (open system): Correct use and applications.
3 - Monovette (open and closed systems):
Using the Monovette system in aspiration mode - correct use and applications.
Using the Monovette system in evacuated mode - correct use and applications.
4 - IR Vein Detector:
Demonstration of the IR vein detector for assisting in detection of difficult veins.
5 - Veins in back of hand:
Detecting suitable veins in the back of the hand.
6 - POC testing:
Point of Care Testing - use of glucose meter to demonstrate a typical POC test procedure. Correct use and overview of other POC test devices.
7 - Using lancets (finger collection)
We look at the correct use of lancets for POC testing and whole blood micro-collection.
8 - Using lancets (heel collection)
We look at the correct use of lancets for neonatal blood spot tests (Guthrie Test).
9 - Capillary collection
Using glass capillary tubes for micro-collection. Correct use and handling.
10 - Microtube collection
Correct use of BD Microtainers (and similar micro-collection bottles) - collection and handling.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6)

    FDSc (Foundation Degree Level) qualification

    Nationally Recognised certificate

    Dually accredited: Open College Network  and CPD

    Covers both aspirated and evacuated systems

    Covers specialised blood collection systems & methods

    Classroom or Virtual Classroom learning options

    Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep)

    Complete your training from beginner to advanced level

    This course either follows on from our Introduction to Phlebotomy Course  or can be combined with our introductory course as part of a course package (see below)

    Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.


Advanced Phlebotomy - Skills & Techniques (GPT005)

Key Facts:


COURSE 1: PERIPHERAL I.V. CANNULATION COURSE (GPT008)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.

 
Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)
Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.





Key Facts:


COURSE 2: VACCINATION / INJECTION COURSE (GPT601)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)


Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (FDSc Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)



SUITABLE FOR:
- MEDICAL / HEALTHCARE (trainees and professionals)
- AESTHETIC THERAPISTS (all levels)

 
This Vaccination / Injection Course is a nurse or paramedic-led half-day session covering all essential theory and practical skill-sets required to deliver effective Intramuscular, Intradermal and Subcutaneous injections / vaccinations.
 
PART 1 - THEORY (online)
Delegates will fully understand the theory and will be able to demonstrate they can identify the correct patient, gain consent and safely administer a vaccine or injection, conforming to WHO and Skills for Health recommended standards.
 
Itinerary:
M01 Course Overview and brief history
M02 Infection Protection Control
M03 Professionalism and Effective Communication
M04 Understanding injection procedures
M05 Why do we vaccinate?
M06 The immune system and how vaccines work. Vaccine types and composition.
M07 The National Vaccine Policy & Schedule
M08 Vaccine preventable diseases
M08A – Covid-19 Update
M09 Vaccines - understanding the reconstitution process
M10 Storage and Handling – understanding correct procedures and protocols
M11 Equipment – Syringes and Syringe Types, Needles and Needle Types, SDV (Single-Dose Vials), MDV (Multi-Dose Vials), Pre-Filled Syringes, Gloves and PPE.
M12 Vaccination sites, techniques and anatomical site selection
i) Intramuscular (IM) Injection
ii) Subcutaneous (SubCut) Injection
iii) Intradermal (ID) Injection
M13 Legal requirements, Consent and Standard Operating Procedures
M14 Adverse Reactions and Basic Life Support Guidance
M15 Record keeping & Documentation
 
PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING
PART 2 - CLASSROOM (am, pm or evening sessions)
3 - 4 hours skill-set development with practical demonstrations and hands-on experience performing Intramuscular, Intradermal and Subcutaneous Injections.
 


How do I attend?

EITHER -
CLASSROOM OPTION - Complete your theory training online at home or work, then attend one of our scheduled classroom locations, completing your Peripheral IV Cannulation Course and your Injection Course on the same day.
Our Peripheral IV Cannulation Course and Injection Course training kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available for you to add at time of booking. Training kits mirror the same equipment and supplies used in the classroom and both include detailed video instructions, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for your one full day to complete your cannulation and injection course training.

Our Virtual Classroom option includes two very comprehensive training kits - one for your cannulation course and one for your injection course. Kits are included at no charge (normally £79.95 and £39.95 respectively) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Additional Courses suitable for Aesthetic Therapists:
Our popular Introduction to Phlebotomy Course also trains you to perform venepuncture at Advanced Level. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Advanced Level.
If you already have phlebotomy skills (or decide to enroll on our phlebotomy training course) then you will be able to offer your clients Platelet-Rich Plasma (PRP) Treatments, also known as Vampire Facials. Our PRP (Vampire Facials) Course trains you in the harvesting, preparation and treatment of PRP for application to your clients as required. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Foundation Degree Level.

If you would like to "mix and match" your training dates and/or locations or would like to build your own package of courses then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are dually accredited and are Skills for Health & WHO compliant.

Medical Aesthetics

Platelet-rich plasma (PRP)

Intravenous Cannulation

Aesthetic Practitioner

Facial Aesthetics

THIS COURSE PACKAGE INCLUDES:
1: PERIPHERAL I.V. CANNULATION - IV THERAPIES COURSE (GPT008)
2: VACCINATION / INJECTION COURSE (GPT601)

Learn how to administer injectables and intravenous therapies ...

FAST-TRACK YOUR AESTHETICS TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% Multi-Course Discount

    Cover all stages from Level 1 through to Level 4 (FDSc)

    Cover your theory training online

    Complete your advanced practical training in 1 day

    Practical training in Classroom or Virtual Classroom

    Comprehensive Practise@Home training kits for VC

    Awards 2 accredited qualifications

    Dual Accreditations for all courses

    Covers all steps required to safely perform injectables

    Covers all steps required to safely perform IV therapies

    Practise IV on artificial arm with fake blood

    Practise injection techniques on realistic injection pads

    Learn beginner to advanced skills and techniques

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Aesthetic Therapy Training - Beginner to Advanced PACKAGE

Cardiff

Milton Keynes 

<div data-testid="richTextElement" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">ONLINE STUDY - In your own time (approx. 6 hours study time) +CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours) Awarding Body:&nbsp;Open College Network (OCN) Credit for LearningAward Level:&nbsp;Level 3 (Advanced Level) - Ireland Level 5CPD Certified:&nbsp;Yes (CPD Accreditation)Minimum Age:&nbsp;18 (16 with parental consent)Entry requirements:&nbsp;None. (English Level 2 desirable)Training Locations:&nbsp;Study online + Classroom&nbsp;OCN Accredited at UK Level 3 (Ireland Level 5) &nbsp;PART 1 - Theory:&nbsp;Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc. PART 2 - Skills and Practical Development: Safely and competently set up and maintain a Peripheral IV Infusion. Attend a classroom location to complete your practical training. <div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"> Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above. </div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">Course Itinerary:</div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"> </div>PART 1 - THEORY (ONLINE) M1 - Peripheral IV Cannulation - Introduction: Definitions - understanding terminology relating to PIVC. IV Therapy and NMC guidelines. M2 - Legal &amp; Professional Responsibilities: Legal Obligations and Accountability. Criminal, Civil and Contractual law in Healthcare. Vicarious Liability and your Duty of Care. M3 - Anatomy &amp; Physiology: Sites appropriate to IV cannulation. Hand vs. arm. Advantages and disadvantages of relevant veins. An overview of Homeostasis and Fluid Balance. M4 - Hygiene and Infection Prevention &amp; Control (IPC): Reducing healthcare-associated infections. Keeping Safe. Bloodborne Pathogens and Work Practice Controls. Standard Precautions. Waste Disposal. Needle-stick injuries. M5 - Indications and Advantages: When to cannulate, infusion types and benefits over alternative infusion routes. Continuous and intermittent infusion. Prophylactic use before procedures and in unstable patients. Contraindications. M6 - Equipment: Cannula types, sizes and colour coding. How to select appropriate size. Equipment overview for total procedure. M7 - Vein Choice for Cannulation: Correct vein selection. Which veins to avoid. How to manage an unsuccessful cannulation. M8 - Procedures: Full procedure for cannulation including correct documentation. M8: Guide to Cannulation - revision M8: Video - Recap with full procedure M9 - Contraindications: When inappropriate to cannulate including patients with specific health conditions. M10 - Complications: A detailed look at potential complications during and after cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions. PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED BEFORE JOINING US FOR YOUR PRACTICAL TRAINING PART 2 (CLASSROOM: 1 - Welcome, introductions and overview: Classroom - registration and introductions. Virtual Classroom - audio/visual checks and registration. 2 - Legal &amp; Professional Responsibilities: Overview and discussion. 3 - Anatomy - key points (appropriate to PIVC): Arteries and veins. Selecting an approprate site. Sites to avoid and &ldquo;first choice&rdquo; sites. 4 - Cannulae - selection and types: A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD. 5 - Complications: Complications of pVAD insertion including examples of infiltration, haematoma, extravasation and transfixation. 6 - VIP Score: Understanding and using the Visual Infusion Phlebitis score. 7 - Equipment - overview: We take a look at all essential equipment required for PIVC. 8 - PRACTICAL SESSIONS: Multiple practical sessions throughout the session. 9 - Fluids: The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann&rsquo;s solution, Colloids (and risks), blood products. 10 - Infusion Rates: Calculating infusion rates and drops per minute. This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.&nbsp;<div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)</div></div>

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Aesthetics

Medicine & Nursing

Venepuncture & Cannulation

Learn how to cannulate ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced) - Ireland Level 5

    CPD Accredited - The CPD Certification Service

    Classroom or Virtual Classroom options

    Covers all steps for cannulating in arm or hand

    Practise on artificial arms and fake blood!

    Essential qualification for all IV therapies

    Phlebotomy training desirable but not essential

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Peripheral I.V. Cannulation Course (GPT008)

Fill your chalice with the invigorating love from Venus together with the wisdom from Sirius. You connect with your inner sanctuary, the place of ultimate receiving and being. Allowing the mystery to unfold and replenishing your well-being.&nbsp;&nbsp;The 08-08 is the high time of the spiritual calendar with the incredible influx of the Sirian Master frequencies. In ancient Egypt, it was celebrated as the beginning of a new cycle, the new year. Many ceremonies were held to connect with this energy and anchor it for the new beginning.&nbsp;The Magdalene Lineage of Isis, Queen Shiba and Mary Magdalene is intrinsically interwoven with this frequency, its teachings and higher knowledge passed on from generation to generation in the female lineages around the world.&nbsp;This Lionsgate join me for a beautiful circle of love, joy, and nurturing energies. Embark on this journey with the codes from Sirius celebrating femininity, and ancient wisdom as a path forward into the future. Awaken the mysterious rose codes and tap into your feminine power.&nbsp;The Power of this year is magnified with it being a triple 8-8-8 portal which is a highly potent time for positive change, innovation and rejuvenation.&nbsp;YOU WILL RECEIVE<ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">The wisdom codes from Sirius</li></ul><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Specialised Attunements from the Sisterhood of the Rose&nbsp;</li></ul><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Deeply nurturing meditation to find your inner still-point&nbsp;</li></ul><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Harmonising of all your chakras, body, heart and soul&nbsp;</li></ul><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Magdalene Codes of power, innate wisdom and joy</li></ul> TEACHINGS<ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Direct insights into the Ascended Masters Lives</li></ul><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">The power of stillness as the greatest source of inspiration and creativity</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">The Magdalene ways to integrate and work with higher energies&nbsp;</li></ul><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Accessing your inner power with joy and confidence</li></ul> FOR ALL PARTICIPANTSYou can either join live or enjoy the replay at a convenient time for you. The audio and video files will be sent out after the event to dive into activations anytime.FIND YOUR TIMEZONE08.00 AM &ndash; HI | 12.00 PM &ndash; MST | 02.00 PM &ndash; EST | 06.00 PM &ndash; BST | 07.00 PM &ndash; CEST

This Equinox is monumental. It anchors all you have achieved this summer while creating a new balance in your life with joy, success, and abundance. It is further amplified during this Eclipse corridor, providing you with positive change and aligning you with your highest destiny. 
The incredible shift, starting with the worldwide Aurora Borealis in May, is now allowing you to co-create the New Archangelic Retreats around the world as places of love, support, and rejuvenation, anchoring the angelic principles in the New Earth. 

In this activation, you will receive upgrades from the Archangelic Kingdom that align you with your highest soul’s calling. The beings who hold Cosmic Christ Codes will attune you to the Golden Solar Fire to activate your highest gifts, which are ready to blossom. 

Enjoy the teachings from the Archangels and Andromedans on creating a blissful and abundant life within the New Earth in harmony with all beings. Understand which angels and archangels to call on for support in all areas of your life and which Galactics can help you achieve your dreams. 

You will receive
Attunement of the Golden Solar Fire
DNA Attunements from the Archangels
Cosmic Codes of Bliss & Co-creation by the Andromedans
Upgrades to your Light Body with Babaji
Anchoring the Archangelic Retreats worldwide
Time to ask your burning questions 

ALL PARTICIPANTS
You can join live or enjoy the replay whenever works best for you. The audio and video files will be sent out after the event so you can dive into activations anytime.

FIND YOUR TIMEZONE
08.00 AM – HI | 12.00 PM – MST | 02.00 PM – EST | 06.00 PM – BST | 07.00 PM – CEST

Katarina Heuser

Spirituality

Health & Wellbeing

Chakra

Spiritual Healing

Energy Healing

Psychic Development

Mystery

Meditation Teacher

Meditation

Discover your special powers, receive insights and deep healing together with an abundance of light codes taking your life to the next level!

September Activation - Archangelic Retreats

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Health & Safety

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Kent

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

382 Courses in Cardiff

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

By EnergyEdge - Training for a Sustainable Energy Future

Definitive Segment Routing for engineers

By Systems & Network Training

LNG Value Chain & Economics - Optimise Your LNG Projects and Supply Strategies

By EnergyEdge - Training for a Sustainable Energy Future

Total QoS for engineers

By Systems & Network Training

Concise MPLS for engineers

By Systems & Network Training

Complete JavaScript

By Systems & Network Training

Total SMTP and email for engineers

By Systems & Network Training

Introduction to the Junos Operating System

By Systems & Network Training

Total IP multicast for engineers

By Systems & Network Training

Essential 5G

By Systems & Network Training

Search By Location