6 Electrical Safety courses in Edinburgh

City & Guilds 18th edition online course with Aberdeen centre examination for only £234.00. Online course, tutor support, same day results, quick results & certification.

It is a requirement within codes of practice e.g., BS 5839-1, and within legislation e.g., Health & Safety at Work Act 1974, that duties are placed upon employers and employees regarding health & safety and in particular electrical safety.

ABOUT THIS TRAINING COURSE Transmission lines and sub-stations are essential components in the electrical power systems. Proper design and maintenance are crucial for transmission lines to maintain a continuous operation. The objective of this 5-day training course is to deal appropriately with control systems, design characteristics and electric & magnetic fields. Participants will gain a better understanding on the corona and gap discharge phenomena, constructional features, and optimization of the transmission lines. Training Objectives By participating in this course, you will be able to: * Understand transmission line design and its application * Examine different types of conductors and electrical characteristics * Explore basic and general transmission line parameters * Prevent overvoltage through insulation design * Determine surge impedance and corona effects * Calculate and measure electric and magnetic fields * Comprehend the impact of audible noise and electromagnetic interference * Identify interference within the transmission line systems Target Audience The course will greatly benefit the following groups but not limited to: * Electrical Engineers * Civil Engineers * Transmission & Distribution Engineers * Substation Operators * Safety Engineers * Reliability Engineers * Facility & Plant Engineers * Technical Engineers * Design Engineers * Plant Supervisors * Electrical Contractors Course Level * Basic or Foundation * Intermediate Training Methods The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization. Course Duration: 5 days in total (35 hours). Training Schedule 0830 - Registration 0900 - Start of training 1030 - Morning Break 1045 - Training recommences 1230 - Lunch Break 1330 - Training recommences 1515 - Evening break 1530 - Training recommences 1700 - End of Training The maximum number of participants allowed for this training course is 25. This course is also available through our Virtual Instructor Led Training (VILT) format. Trainer Your expert course leader is a professional engineer with extensive experience in power system studies, substation design field-testing, and EHS programs settings for Mining and Electrical Utilities sectors. He was formally the Engineering Manager at GE Canada in Ontario. He received his M.Sc. in electrical engineering from the University of New Brunswick and his MBA from Laurier School of Business in Waterloo. He has managed and executed more than 150 engineering projects on substation design EMF audits and power system studies and analyses, EMF audits and grounding audits, for major electrical utilities, mines, oil and gas, data centers, industrial and commercial facilities in Canada and the U.S. He is a certified professional engineer in the provinces of Ontario and Alberta. He has various IEEE publications, has served as a technical reviewer for many IEEE journals in power systems and control systems, and is the chair of the Industry Application Chapter (IAS) for IEEE Toronto Section. He remains a very active member for the IEEE substation committee of IEEE Std. 81 ground testing (WGE6) and IEEE Std. 80 ground design (WGD7). A certified electrical safety trainer by GE Corporate and a Canadian Standard Association (CSA) committee member at the mining advisory panel for electrical safety, he also taught many technical courses all over Canada to industrial customers, electrical consultants as well as to electrical utilities customers. Highlighted Projects: * Various Power System Studies for 345/230 kV Stations - Nova Scotia Power (EMERA) * RF audits for Telecom tower and antennas - Cogeco/Rogers Mobile * Power System analysis - Powell Canada * Structural/Geotechnical Design and upgrades - Oakville Hydro * Underground Cables testing and sizing - Plan Group * Relay programming and design optimization - Cenovus Canada * Different Arc Flash Analysis and BESS Design - SNC Lavalin * Environmental site assessment (ESA) Phase I/II for multiple stations - Ontario * Electromagnetic compatibility (EMC) assessment for Toronto LRT expansion - MOSAIC * Battery energy storage system (BESS) installation at City of London - Siemens Canada * EMF audits for 500 kV Transmission Lines - Hydro One * EMF audits for 500 kV Transmission Lines - Hydro Quebec * AC interference for 138 kV line modeling and mitigations - HBMS Mine POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

ABOUT THIS TRAINING COURSE The smart meter or smart grid represents the next-generation electrical power system. This system uses information, data & communication technology within generation, delivery and consumption of electric energy. This 4-day course will equip you with the innovations that are shaping the power generation and distribution systems and will cover topics ranging from Smart Metering Architecture, Cybersecurity, Smart Grid Systems and Power Line Communications. Training Objectives By participating in this course, you will be able to: * Comprehend the Smart Grid and Smart Meters architecture * Review latest trends and challenges within the Smart Grid Technology * Perform analysis on smart electronic meters * Comply with regulatory and metering standards * Recognize the importance of cybersecurity in smart grids * Maximize efficiency, reliability, and longevity of your smart meters and equipment * Gain valuable insights into power quality and harmonics Target Audience This course will greatly benefit the following groups but not limited to: * Smart Grid managers and engineers * Smart Meters managers and engineers * Power plant managers * Outage managers * Maintenance and operations engineers * Power regulatory personnel * Transmission managers and engineers * Distribution managers and engineers * IT managers * Renewable energy managers and engineers Course Level * Basic or Foundation * Intermediate Training Methods The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization. Course Duration: 4 days in total (28 hours). Training Schedule 0830 - Registration 0900 - Start of training 1030 - Morning Break 1045 - Training recommences 1230 - Lunch Break 1330 - Training recommences 1515 - Evening break 1530 - Training recommences 1700 - End of Training The maximum number of participants allowed for this training course is 25. This course is also available through our Virtual Instructor Led Training (VILT) format. Trainer Your expert course leader is a professional engineer with extensive experience in power system studies, substation design field-testing, and EHS programs settings for Mining and Electrical Utilities sectors. He was formally the Engineering Manager at GE Canada in Ontario. He received his M.Sc. in electrical engineering from the University of New Brunswick and his MBA from Laurier School of Business in Waterloo. He has managed and executed more than 150 engineering projects on substation design EMF audits and power system studies and analyses, EMF audits and grounding audits, for major electrical utilities, mines, oil and gas, data centers, industrial and commercial facilities in Canada and the U.S. He is a certified professional engineer in the provinces of Ontario and Alberta. He has various IEEE publications, has served as a technical reviewer for many IEEE journals in power systems and control systems, and is the chair of the Industry Application Chapter (IAS) for IEEE Toronto Section. He remains a very active member for the IEEE substation committee of IEEE Std. 81 ground testing (WGE6) and IEEE Std. 80 ground design (WGD7). A certified electrical safety trainer by GE Corporate and a Canadian Standard Association (CSA) committee member at the mining advisory panel for electrical safety, he also taught many technical courses all over Canada to industrial customers, electrical consultants as well as to electrical utilities customers. Highlighted Projects: * Various Power System Studies for 345/230 kV Stations - Nova Scotia Power (EMERA) * RF audits for Telecom tower and antennas - Cogeco/Rogers Mobile * Power System analysis - Powell Canada * Structural/Geotechnical Design and upgrades - Oakville Hydro * Underground Cables testing and sizing - Plan Group * Relay programming and design optimization - Cenovus Canada * Different Arc Flash Analysis and BESS Design - SNC Lavalin * Environmental site assessment (ESA) Phase I/II for multiple stations - Ontario * Electromagnetic compatibility (EMC) assessment for Toronto LRT expansion - MOSAIC * Battery energy storage system (BESS) installation at City of London - Siemens Canada * EMF audits for 500 kV Transmission Lines - Hydro One * EMF audits for 500 kV Transmission Lines - Hydro Quebec * AC interference for 138 kV line modeling and mitigations - HBMS Mine POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

City & Guilds 18th edition online course with Edinburgh centre examination for only £234.00. Online course, tutor support, same day results, quick results & certification.

It is a requirement within codes of practice e.g., BS 5839-1, and within legislation e.g., Health & Safety at Work Act 1974, that duties are placed upon employers and employees regarding health & safety and in particular electrical safety.