61 CSCS (Construction Skills Certification Scheme) courses in London

City & Guilds 18th edition course with 2382-22 final exam only £234.00. Exams available every week across the UK, same day results, quick certificate, best prices..

Training is on Days 1-3. Testing will be on either day 4 or day 5. Course structure: Establish the weight and dimensions of loads and communicate this information to the crane operator. Select appropriate lifting tackle and attach and detach it correctly and safely. Use clear and unambiguous signals to direct the actions of a crane moving loads of various weights and dimensions. Determine the serviceability of lifting accessories, and maintain and store them. Includes ‘Pick & Carry’ Duties training and testing. The course runs for 4 days (3 days of training and 1 days for technical tests). -------------------------------------------------------------------------------- INSTRUCTIONS You must also bring your own PPE (boots, hi vis vest or jacket, hard hat and gloves). NB VERY IMPORTANT: All candidates must provide identification in the form of a current Photo ID Driver Licence or Passport. If you do not have one of these please call or email us to ask what suitable alternatives might be. If you are undertaking a CPCS course you MUST have passed an approved CITB or NOCN Health, Safety and Environment Test within the last 2 years. If you are unsure about this requirement, please contact us at cpcs@handsonskills.co.uk [cpcs@handsonskills.co.uk]. If there are any queries regarding this booking, or if you would like to talk to us about further training requirements, please do not hesitate to contact us. You can contact us from Monday to Friday between 09.00 to 16.00 on: Tel: 020 7511 7881 and by email to cpcs@handsonskills.co.uk [cpcs@handsonskills.co.uk] Before you attend the course, please read the joining instructions and training terms and conditions. It is very important that the course delegate understands the course objectives and complies with the centre rules before attending the course in order to gain maximum value from training. Details of the course are as follows: Registration and course timings: Courses will start at 08:00. You should aim to be at the centre a minimum of 15 minutes prior to the course start time for signing in. There is a half hour break at lunch time (approximately at 12:00) and courses generally finish between 15.30 and 16.00. Depending upon the course content, the instructor may require the course to start and finish at different times on subsequent course days (if any). -------------------------------------------------------------------------------- 📎 SLINGER_manual_PDF_v1.pdf [https://images.cademy.co.uk/c7b286ef-d078-435c-9894-10ef7a805bb6/2e1ef83f-5005-4918-b872-85d56bfedbe4/original.pdf]

Construction (Design & Management) Regulations 2015 - this law applies to the whole construction...

Have you ever consider supervising a construction site??? Come to Knight Training to get your CITB Temporary Works Supervisor and Co-ordinator Course now! For more information, please visit us at https://knight.training/

NPORS Industrial Counterbalance Lift Truck (N001)

We have brought you the best quality regulated first aid training both jointly offered by Seacass Consultancy and delivered by Comply Sense, this course is regulated by TQUK and comes with certification for 3 years.  You can choose to have this course as a full classroom course or a blended option with 2 days in the classroom plus 6 hours online at home. Using the very latest in equipment and even the use of Virtual Reality, we aim to ensure you get the best experience possible whilst getting your first aid certification.  People really do love our training, we have over 500 Five star reviews, just have a look at our google reviews Click Here [https://www.google.co.uk/search?q=comply+sense&sca_esv=573754553&source=hp&ei=Xx8tZbiLA-uYhbIPh-WymAg&iflsig=AO6bgOgAAAAAZS0tbxNn6PsMcBQe9-ySIDh8RyZ3P5BE&gs_ssp=eJzj4tVP1zc0LEorSiqoSjM1YLRSNagwsTA3TTZMTDUxMExOMkxMsjKoSDQ2MU4zMjQ3NQPKJRqaefEk5-cW5FQqFKfmFacCAJ-XFAQ&oq=comply+se&gs_lp=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&sclient=gws-wiz#lrd=0x4875c1ae401cb1ab:0xa343f21756875a16,1,,,,] or our awarding organisation reviews Click Here [https://www.procourses.co.uk/facilitators/15128-comply-sense-darren-robathan-west-sussex]. 

This CITB HSA course highlights potential hazards when on a construction site.

This course provides participants with a comprehensive understanding of the requirements of the CDM Regulations 2015 and how these should be implemented in practice. The Regulations are put in context with other key health and safety legislation. The programme sets out clearly the roles and responsibilities of the principal duty holders and explores with the participants how these roles may vary on different types of project and procurement routes. The programme examines the content and appropriate level of information that should be included in the Pre-Construction Information and the Construction Phase Plan. The trainer will discuss best practice in implementing CDM through the new 2015 Regulations and Guidance. This course is essential for anyone who is involved in the procurement, planning, design or implementation of construction work. The course will provide you with: * An overview of construction health and safety law, liability and enforcement * A detailed understanding of the 2015 CDM Regulations and the part they play with other key legislation * An explanation of the roles and responsibilities of all duty holders and the requirements for the CDM documentation * Clear advice on current best practice for complying with the principles of the CDM Regulations and the changes introduced by the 2015 Regulations * An understanding of how risk assessment should be applied practically throughout the design and how this responsibility is then transferred to contractors 1 INTRODUCTION * Why manage health and safety? * The costs of accidents * Construction industry statistics * Why CDM? * Health and safety culture in the construction industry 2 OVERVIEW OF HEALTH AND SAFETY LAW AND LIABILITIES * Criminal and civil law * Liability * Enforcement and prosecution * Compliance - how far do we go? * Statutory duties 3 HEALTH AND SAFETY LAW IN CONSTRUCTION * Framework of relevant legislation * Health and Safety at Work etc Act 1974 * Management of Health and Safety at Work Regulations 1999 * Construction (Design and Management) Regulations 2015 * Who is responsible for the risks created by construction work? * Shared workplaces/shared responsibilities * Control of contractors - importance of contract law 4 CONSTRUCTION (DESIGN AND MANAGEMENT) REGULATIONS 2015 * Scope - What is construction? * Application - When do they apply? * The CDM Management System * Duty holders (Client, Domestic Client, Designer, Principal Designer, Principal Contractor, Contractor) * Documents (HSE Notification, Pre-Construction Information, Construction Phase Health & Safety Plan, H&S File) * Management process * The 2015 Guidance 5 BEST PRACTICE - KEY ISSUES IN THE CDM PROCESS * The client and client management arrangements * Competence and resource under CDM 2015 * The role of the Principal Designer in practice * Design risk assessment and the role of the Designer * The CDM Documents (PCI, PCI Pack, Plan and File) * Construction health, safety and welfare * Making CDM work in practice 6 QUESTIONS, DISCUSSION AND REVIEW

This course provides participants with a comprehensive understanding of the requirements of the CDM Regulations 2015 and how these should be implemented in practice. The Regulations are put in context with other key health and safety legislation. The programme sets out clearly the roles and responsibilities of the principal duty holders and explores with the participants how these roles may vary on different types of project and procurement routes. The programme examines the content and appropriate level of information that should be included in the Pre-Construction Information and the Construction Phase Plan. The trainer will discuss best practice in implementing CDM through the new 2015 Regulations and Guidance. This course is essential for anyone who is involved in the procurement, planning, design or implementation of construction work. The course will provide you with: * An overview of construction health and safety law, liability and enforcement * A detailed understanding of the 2015 CDM Regulations and the part they play with other key legislation * An explanation of the roles and responsibilities of all duty holders and the requirements for the CDM documentation * Clear advice on current best practice for complying with the principles of the CDM Regulations and the changes introduced by the 2015 Regulations * An understanding of how risk assessment should be applied practically throughout the design and how this responsibility is then transferred to contractors 1 INTRODUCTION * Why manage health and safety? * The costs of accidents * Construction industry statistics * Why CDM? * Health and safety culture in the construction industry 2 OVERVIEW OF HEALTH AND SAFETY LAW AND LIABILITIES * Criminal and civil law * Liability * Enforcement and prosecution * Compliance - how far do we go? * Statutory duties 3 HEALTH AND SAFETY LAW IN CONSTRUCTION * Framework of relevant legislation * Health and Safety at Work etc Act 1974 * Management of Health and Safety at Work Regulations 1999 * Construction (Design and Management) Regulations 2015 * Who is responsible for the risks created by construction work? * Shared workplaces/shared responsibilities * Control of contractors - importance of contract law 4 CONSTRUCTION (DESIGN AND MANAGEMENT) REGULATIONS 2015 * Scope - What is construction? * Application - When do they apply? * The CDM Management System * Duty holders (Client, Domestic Client, Designer, Principal Designer, Principal Contractor, Contractor) * Documents (HSE Notification, Pre-Construction Information, Construction Phase Health & Safety Plan, H&S File) * Management process * The 2015 Guidance 5 BEST PRACTICE - KEY ISSUES IN THE CDM PROCESS * The client and client management arrangements * Competence and resource under CDM 2015 * The role of the Principal Designer in practice * Design risk assessment and the role of the Designer * The CDM Documents (PCI, PCI Pack, Plan and File) * Construction health, safety and welfare * Making CDM work in practice 6 QUESTIONS, DISCUSSION AND REVIEW

Site supervisor safety training scheme refresher (SSSTS-R)