ABOUT THIS TRAINING COURSE
This 5 full-day course provides a comprehensive understanding of all the
commissioning and start-up activities of circulating fluidized bed (CFB) boiler
coal power plants. The Commissioning Management System of CFB boiler coal power
plants is covered in detail in this course. This includes all the commissioning
procedures and documents, purpose of commissioning, responsibilities, system
description, organization, working parties, test teams, documentation, testing
and commissioning schedules, test reports, safety, plant certification, and
plant completion report.
The course provides also a thorough understanding of all the commissioning
requirements for CFB boiler and auxiliaries, turbines and auxiliaries, generator
and auxiliaries, electrical equipment, switchgear equipment, switchgear, and
transformers. All the stages of the commissioning procedure are covered in-depth
in this course. This includes preparation - planning various activities,
pre-commissioning checks and tests, typical commissioning schedule, detailed
tests and commissioning procedures and instructions for every component in a
coal power plant, instrumentation, trial run of the equipment, safety and
precautions, commissioning of CFB boiler coal power plant systems, Safety Rules
Clearance Certificates, procedure for the control and handling of defects,
Commissioning Reports.
This course is a MUST for anyone who is involved in the pre-commissioning or
commissioning of any CFB boiler coal power plant equipment because it provides
detailed pre-commissioning checks and detailed tests and commissioning
procedures and instructions for every component in a CFB boiler coal power
plant.
In addition, the course provides in-depth coverage of all preparation, planning
activities, commissioning schedules, trial run of each CFB boiler coal power
plant equipment, safety and precautions, Safety Rules Clearance Certificates,
Procedures for handling defects, and Commissioning Reports.
Training Objectives
* Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning
Procedures and Instructions for Every Equipment in CFB Boiler Coal Power
Plants: Gain a thorough understanding of all pre-commissioning checks and
tests, and all commissioning procedures and instructions for every equipment
in CFB boiler coal power plants
* Commissioning Management System of CFB Boiler Coal Power Plants: Discover the
benefits of the Commissioning Management System of CFB boiler coal power
plants including all commissioning procedures and documents, purpose of
commissioning, responsibilities, system description, organization, working
parties, test teams, documentation, testing and commissioning schedules, test
reports, safety, plant certification, and plant completion report
* Commissioning Procedures and Instructions for CFB Boiler and Auxiliaries in
Coal Power Plants: Learn about the commissioning procedures and instructions
for CFB boiler and auxiliaries including all commissioning activities,
typical commissioning schedule, hydraulic test and wet preservation, air and
gas tightness test, trial run of equipment, electronic precipitators, fuel
oil system, preparation for first light up, alkali boil - out, acid cleaning
and passivation, thermal flow test of economizer, water walls, and
superheater, valves, steam boiling, and safety valve setting
* Commissioning Procedures and Instructions for Turbine and Auxiliaries: Gain a
thorough understanding of all the commissioning procedures and instructions
for turbine and auxiliaries including acid cleaning of oil pipelines,
lubrication and governing system (oil flushing and hydraulic testing),
jacking oil system, governing system, regenerative system, barring gear,
vacuum tightness test, first rolling of turbine and data logging
* Commissioning Procedures and Instructions for Generator and Auxiliaries:
Discover all the commissioning procedures and instructions for generator and
auxiliaries including generator, seal oil system, hydrogen gas system, stator
water system, rolling and payment of generator
* Commissioning Procedures and Instructions for Electrical Equipment: Learn
about all the commissioning procedures and instructions for electrical
equipment including switchyard equipment, switchgear, transformers, and
motors
* CFB Boiler Coal Power Plant Equipment and Systems: Learn about various CFB
boiler coal power plant equipment and systems including: CFB boilers,
superheaters, reheaters, steam turbines, governing systems, deaerators,
feedwater heaters, coal-handling equipment, transformers, generators and
auxiliaries
Target Audience
* Engineers of all disciplines
* Managers
* Technicians
* Maintenance personnel
* Other technical individuals
Training Methods
Your specialist course leader relies on a highly interactive training method to
enhance the learning process. This method ensures that all participants gain a
complete understanding of all topics covered. The training environment is highly
stimulating, challenging, and effective because the participants will learn by
case studies which will allow them to apply the material taught to their own
organization.
Each delegate will receive a copy of the following materials written by the
instructor:
* 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012
(800 pages)
* Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION
AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages)
* CFB BOILER COAL POWER PLANT COMMISSIONING MANUAL (includes practical
information about all pre-commissioning checks and tests, typical
commissioning schedule, detailed tests and commissioning procedures and
instructions for every component and system in CFB boiler coal power plants -
400 pages)
Trainer
Your specialist course leader has more than 32 years of practical engineering
experience with Ontario Power Generation (OPG), one of the largest electric
utility in North America. He was previously involved in research on power
generation equipment with Atomic Energy of Canada Limited at their Chalk River
and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as
a Training Manager, Engineering Supervisor, System Responsible Engineer and
Design Engineer. During the period of time, he worked as a Field Engineer and
Design Engineer, he was responsible for the operation, maintenance, diagnostics,
and testing of gas turbines, steam turbines, generators, motors, transformers,
inverters, valves, pumps, compressors, instrumentation and control systems.
Further, his responsibilities included designing, engineering, diagnosing
equipment problems and recommending solutions to repair deficiencies and improve
system performance, supervising engineers, setting up preventive maintenance
programs, writing Operating and Design Manuals, and commissioning new equipment.
Later, he worked as the manager of a section dedicated to providing training for
the staff at the power stations. The training provided by him covered in detail
the various equipment and systems used in power stations. In addition, he has
taught courses and seminars to more than four thousand working engineers and
professionals around the world, specifically Europe and North America. He has
been consistently ranked as 'Excellent' or 'Very Good' by the delegates who
attended his seminars and lectures. He written 5 books for working engineers
from which 3 have been published by McGraw-Hill, New York. Below is a list of
the books authored by him;
* Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation,
and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York,
October 2011.
* Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.
* Power Plant Equipment Operation and Maintenance Guide (800 pages),
McGraw-Hill, New York, January 2012.
* Industrial Instrumentation and Modern Control Systems (400 pages), Custom
Publishing, University of Toronto, University of Toronto Custom Publishing
(1999).
* Industrial Equipment (600 pages), Custom Publishing, University of Toronto,
University of Toronto, University of Toronto Custom Publishing (1999).
Furthermore, he has received the following awards:
* The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in
December 2016
* The first 'Excellence in Teaching' award offered by the Professional
Development Center at University of Toronto (May, 1996).
* The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV
Akademie is one of the largest Professional Development centre in world, it
is based in Germany and the United Arab Emirates, and provides engineering
training to engineers and managers across Europe and the Middle East).
* Awarded graduation 'With Distinction' from Dalhousie University when
completed Bachelor of Engineering degree (1983).
Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction'
from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a
Master of Applied Science in Engineering (M.A.Sc.) from the University of
Ottawa, Canada. He is also a member of the Association of Professional Engineers
in the province of Ontario, Canada.
POST TRAINING COACHING SUPPORT (OPTIONAL)
To further optimise your learning experience from our courses, we also offer
individualized 'One to One' coaching support for 2 hours post training. We can
help improve your competence in your chosen area of interest, based on your
learning needs and available hours. This is a great opportunity to improve your
capability and confidence in a particular area of expertise. It will be
delivered over a secure video conference call by one of our senior trainers.
They will work with you to create a tailor-made coaching program that will help
you achieve your goals faster.
Request for further information post training support and fees applicable
Accreditions And Affliations