65 C++ courses in Nottingham

This Level 4 City and Guilds 2396-01 Design and Verification of Electrical Installations course has been designed to help develop the skills and up date the knowledge of the requirements to enable you to professionally design, erect and then verify an electrical installation. This course is aimed at those who will have responsibility for designing, supervising, installing and testing electrical installations. Further information can be found here: C&G 2396 Electrical Design Course — Optima Electrical Training (optima-ect.com)

MEF CARRIER ETHERNET TRAINING COURSE DESCRIPTION The course progresses from a overview of the Carrier Ethernet service and how it works onto looking at the concepts in depth. Service attributes and management follow with the course finishing with studies of practical Carrier Ethernet. WHAT WILL YOU LEARN * Discuss and understand key Carrier Ethernet Concepts. * Understand tasks related to designing, deploying and maintaining a Carrier Ethernet network. * Offer effective solutions to implementing a Carrier Ethernet enterprise network given available customer resources and requirements. * Carry out informed discussions using industry Carrier Ethernet 'vocabulary. * Pass the MEF CECP 2.0 professional accreditation exam. MEF CARRIER ETHERNET TRAINING COURSE DETAILS * Who will benefit: Anyone working with Carrier Ethernet * Prerequisites: The course attendees need to be conversant with data networks, as well as Ethernet and IP technologies. * Duration 5 days MEF CARRIER ETHERNET TRAINING COURSE CONTENTS * Section One: Introduction to Carrier Ethernet * Introduction to Carrier Ethernet: What is Carrier Ethernet? Evolution, advantages, The MEF, MEF specifications; UNI, EVC, OVC, EPL/EVPL, EP-LAN/ EVP-LAN, EP-Tree/EVP-Tree, etc, overview. * How Carrier Ethernet Works: Service Frame Handling. Carrier Ethernet at Customer Premises, metro and core. Carrier Ethernet Workings, UNI attributes, Service Attributes (EVC and EVC per UNI attributes), Bandwidth Profiles, service multiplexing, L2 protocol processing; Carrier Ethernet equipment, CPE, aggregation and homing nodes, core equipment; management systems. * The Setting Up of a Carrier Ethernet Service: Step 1: Choose service type, EPL/EVPL, EP-LAN/EVP-LAN, EPTree/EVP-Tree, EVLine...; Step 2: CPE tasks, UNI-C tasks (UNI attributes, service attributes (EVC and EVC per UNI) and bandwidth profiles), UNI-N tasks (L2 protocol handling). Step 3: Non-CPE tasks, Access, metro and core connections set up. * Section Two: Carrier Ethernet Concepts in depth * Carrier Ethernet Definitions in Depth: UNI, UNI I & II, UNI-N and UNI-C, etc.; NNI/ENNI; EVC; OVC, OVC type (P2P, M2M, Rooted MP), OVC end point (root, leaf, trunk), OVC end point map, OVC end point bundling; Service types in detail, EPL/EVPL, EP-LAN/EVP-LAN, EP-Tree/EVP-Tree, EVLine, Access EPL, Access EVPL . * Carrier Ethernet Service Frame Handling: Unicast, multicast and broadcast frame delivery, Tagged, untagged and priority; Tagging, C and S-Tags, 802.3, 802.1d, 802.1q, 802.1ad, 802.1ah evolution, VLAN ID translation/preservation. CoS preservation. * Other Key Carrier Ethernet Concepts: MTU, MTU at UNI, MTU at ENNI; Physical Layer Attributes, FE, GbE and 10GbE, Service Multiplexing and Bundling Concept and detail, rules and implications; Hairpin Switching * Managing Bandwidth in a Carrier Ethernet Network: Token Bucket Algorithm, EIR, CIR, CBS, EBS, Coupling Flag; Frame Colors, recoloring, Color Awareness attribute, Color Forwarding; Bandwidth Profiles, rules and concepts. MEF CoS identifiers, DEI bit (in S-Tag), PCP bit (in C-Tag or S-Tag), or DSCP (in IP header), Multiflow bandwidth concepts; CoS Label/Color Identification. * Section Three: Carrier Ethernet Service Attributes Overview: Carrier Ethernet 2.0; Blueprint C Service Attributes: Per UNI, Physical interfaces, Frame format, Ingress/egress Bandwidth Profiles, CEVLAN ID/EVC Map, UNI protection. EVC per UNI, Ingress/egress Bandwidth Profiles, etc.; Per EVC, CEVLAN ID Preservation, CoS ID Preservation, Relationship between SLA and SLP, Class of Service, etc. OVC, ENNI, OVC End Point per UNI and OVC End Point per ENNI, Ingress/egress bandwidth profiles, etc. * Section Four: Managing Carrier Ethernet Networks Overview: MEF Service Lifecycle. Carrier Ethernet maintenance: Port, Link & NE failure, Service Protection Technologies, Fault Identification and Recovery, LAG, Active/Standby EVC, Single EVC with transport protection, G.8031, G.8032, MPLS FRR. * SOAMs: Connectivity fault management, connectivity Monitoring, Loopback, Linktrace; Performance Management, Frame Delay, Inter Frame Delay Variation, Availability, Frame Loss Ratio, Resiliency, HLI, DMM, DMR, SLM, SLR; Key Concepts, Single vs dual ended, ordered UNI pair calculations. * LOAMs: Link discovery, link monitoring, etc. * Terminology and Concepts: MEG levels, MIPs. * Section Five: Practical Carrier Ethernet Carrier Ethernet Transport Technologies: Layer 1: SDH. Layer 2: Bridging, provider bridging, PBB, PBBTE. Layer 2.5: MPLS VPWS, MPLS VPLS, MPLS-TP. * Carrier Ethernet Access Technologies: fiber, SDH, active fiber, PON, GPON, 10G PON, OTN, WDM; copper, PDH, G-SDSL, 10Pass-TS, HFC; packet radio. * Optimising mobile backhaul with Carrier Ethernet Key challenges solutions: Market pressure, LTE evolution, elements and architecture (RAN BS, NC, GWIF.), synchronization, bandwidth management. * Circuit Emulation over Ethernet: Purpose, needs and applications. Synchronization: Phased, ToD, External Reference source, SynchE ,NTP, IEEE-1588 v2/ PTP, ACR; MEF Service Definitions for emulated circuits. * Applying what you know: Practical examples and scenarios, Carrier Ethernet solutions; Practice Scenarios, Given a scenario, determine appropriate Ethernet services

The NVQ Level 3 is designed to provide both new entrants and those seeking progression in their career, with the opportunity to develop the necessary skills to carry out job roles and responsibilities associated with the installation and maintenance of Electrotechnical systems.

The Gold Card Training Programme is the most comprehensive electrician course available. We offer weekday, weekend and evening delivery options. JIB ECS (Gold) Card is quickly becoming a necessity when seeking work on commercial sites, or sub-contracting to larger contractors.

CPRI TRAINING COURSE DESCRIPTION This course is designed to give the delegate a technical overview of the CPRI protocols and link setup. We will explain the industry cooperation to define the key internal interface between the radio equipment control (REC) and the radio equipment (RE). Also explained will be the SAP that the CPRI link supports for IQ Interface, frame synchronisation, link control and management and the master and slave ports. We will investigate the CPRI block diagram and together with the data formats and sample mapping solutions. The CPRI frame hierarchy and hyperframe construction will be detailed during this three day overview course. WHAT WILL YOU LEARN * Explain the CPRI Block diagram. * Understand hyperframing capabilities. * Explain the CPRI frame format. * Understand how the synchronisation is compliant with 3GPP & WiMAX requirements. * Understand the two electrical characteristics of CPRI standard. * Understand the CPRI standards structure. * Understand the CPRI system & Interface definitions. * List the four standard bit rates of the CPRI specification. * Understand the CPRI Protocol stacks. CPRI TRAINING COURSE DETAILS * Who will benefit: Anyone looking for a technical overview of the CPRI protocols and link set up. * Prerequisites: None. * Duration 3 days CPRI TRAINING COURSE CONTENTS * System Description Subsystems. Nodes. Protocol layers. Protocol data planes. User data planes. Antenna carriers. Service Access Points (SAP). Link. Passive Link. Hop. Multi-hop Connection. Logical Connection. Master Port & Slave Port. * System Architecture Basic System Architecture & Common Public Radio Interface Definition. System Architecture with a link between Res. Reference configurations: Chain topology, Tree topology, Ring topology. RECs & REs in both chain & tree topology * Functional description Radio Functionality. Functional Decomposition between REC and RE: For UTRA FDD, For WiMAX & E-UTRA, For GSM. CPRI Control Functionality. * Interface Baseline Interface Specification. Protocol Overview. IQ Data. Synchronisation. L1 Inband Protocol. C & M Data. Protocol Extensions. Vendor Specific Information. * Physical Layer Specifications Line Bit Rate. Physical Layer Modes. Electrical Interface. Optical Interface. Line Coding. Bit Error Correction/Detection. Frame Structure. Mapping Methods. Container Blocks. Hyperframes. GSM, UMTS & WiMAX Timing. Link Delay Accuracy & Cable Delay Calibration. Link Maintenance * Data Link Layer (Layer 2) Specification Layer 2 Framing for Fast & Slow C & M Channels. Medium Access Control/Data Mapping. Flow Control. * Start-up Sequence General. Layer 1 Start-up Timer. State Description. Transition Description. * Interoperability Reserved Bandwidth. Version Numbers. * Supplementary Specification Details Delay Calibration Example. Reference Test Points. * List of Abbreviations & Gloss

ASP.NET TRAINING COURSE DESCRIPTION Our hands on ASP.NET training course that will teach students how to create a simple ASP.NET application that delivers dynamic content to the web. The course is applicable for those using C# or VB.NET with ASP.NET. WHAT WILL YOU LEARN * Create a web form with server controls * Separate page code from content with code-behind pages, page controls, and components. * Display dynamic data from a data source by using ADO.NET and data binding. * Debug ASP.NET pages by using trace. ASP.NET TRAINING COURSE DETAILS * Who will benefit: Programmers working with ASP.NET. * Prerequisites: HTML5 development fundamentals VBNet_course.htm or C++ programming foundation * Duration 3 days ASP.NET TRAINING COURSE CONTENTS * Working with ASP.NET Introducing ASP.NET. Creating web forms. Adding ASP.NET code to a page. Handling page events. * Using Web Controls Web controls and HTML controls compared. Using intrinsic controls. Using input validation controls. Introduction to user controls. * Using trace in ASP.NET pages Overview of tracing. Trace information. Page-level trace and application-level trace. * Separating code from content Advantages of partitioning an ASP.NET page. Creating and using code-behind pages. Creating and using components and classes. Inheritance of classes. Interfaces. * Using ADO .NET to access data Accessing text files. Overview of ADO .NET Connecting to a data source. Accessing data with DateSets. Using DataViews. Accessing data with DataReaders. Using XML data with a DataSet. * Creating an ASP.NET Web Application Requirements of a web application. Sharing information between pages. Securing an ASP.NET application. Web services. Creating a simple web service using Visual Studio.NET Calling a web service using Visual Studio.NET

ADO.NET TRAINING COURSE DESCRIPTION This ADO.net training course is designed to enable developers to use the toolset provided with.NET for data access including ADO.net objects, data controls, designers and interoperability with earlier ADO objects. The course is applicable for those using C# or VB.NET with ADO.NET WHAT WILL YOU LEARN * Retrieve and manipulate data using Microsoft's ADO.NET library. * Work with the ADO.NET object model. * Update data, including handling stored procedures, parameters, and return value. * Search, sort and filter data. * Leverage the power of XML. ADO.NET TRAINING COURSE DETAILS * Who will benefit: Programmers working with ADO.Net. * Prerequisites: Effective programming with VB.NET or Concise introduction to C# * Duration 2 days ADO.NET TRAINING COURSE CONTENTS * Introducing ADO.Net Traditional Data Access Architecture. ADO.Net Disconnected Data Access Architecture. Different components of ADO.Net. * A review of basic SQL queries SQL SELECT Statement. SQL INSERT Statement. SQL UPDATE Statement. SQL DELETE Statement. * Common data access tasks with ADO.Net Accessing Data using ADO.Net. Defining the connection string. Defining a Connection. Defining the command or command string. Defining the Data Adapter. Creating and filling the DataSet. * A Demonstration Application The Interface. Loading the table. Filling the controls on the Form. Navigating through the records. * Updating Data Steps for updating the table. Building the Application. Loading the table and displaying data in the form's controls. Initialising Commands. Adding Parameters to the commands. The ToggleControls() method of our application. Editing (or Updating) Records. Event Handler for the Save Button. Event Handler for the Cancel Button. Inserting Records. Deleting a Record. * Using Stored Procedures Sample Stored Procedures. UPDATE Stored Procedure. INSERT Stored Procedure. DELETE Stored Procedure. SELECT Stored Procedure. Using Stored Procedures with ADO.Net.

OOAD TRAINING COURSE DESCRIPTION A workshop course providing thorough practical knowledge of object oriented analysis and design methods. WHAT WILL YOU LEARN * Perform Systems Analysis with Object Oriented methods. * Identify key classes and objects. * Expand and refine OO problem domain models. * Design Class hierarchies using inheritance and polymorphism. * Design programs with Object Oriented methods. OOAD TRAINING COURSE DETAILS * Who will benefit: System analysts, designers, programmers and project managers. * Prerequisites: It is desirable that delegates have experience of programming in C++/Java or some other OOP language. * Duration 5 days OOAD TRAINING COURSE CONTENTS * What is OO? Classes, objects, messages, encapsulation, associations, inheritance, polymorphism, reusability. * What is Systems Analysis and design? Data flow diagrams, structure diagrams. The OO approach. * OOA The problem domain and object modelling. Identifying classes and objects. Generalisation and inheritance. Defining attributes and methods. * OOD Refining the OOA results. Designing the User Interface. Designing the algorithms and data structures using objects. Designing the methods. * OOP Prototyping. Implementing OOD with OOPs and OOPLs.

The shortage of electricians has lead to an increased demand nationwide and in turn a sharp rise in salary. Our training solutions can help you gain nationally recognised qualifications such as City & Guilds and NVQ. Not only you will train in state-of-the-art training centres, but you can also have the opportunity to attain the Work Based Performance Units and complete a portfolio of diverse evidence of onsite work.

This course shows you how to apply various approaches and algorithms to solve business problems through AI and ML, follow a methodical workflow to develop sound solutions, use open-source, off-the-shelf tools to develop, test, and deploy those solutions, and ensure that they protect the privacy of users. This course includes hands-on activities for each topic area.