5 Philosophy courses in Hemsworth

Introduction: “Co-ordinating the temporary works process” This two day course is designed to assist those on site who have responsibility for managing all forms of temporary works. It is also designed to give confidence to senior management and those who engage contractors have reached an assessed standard of knowledge. The course has the support of a number of organisations: Temporary Works Forum CECA, UKCG, HSE and FMB. The support of these organisations offers transferability of the course within industry. Temporary works are usually safety and business-critical and require careful co-ordination. An accepted way of achieving this is through the adoption of the management process outlined in BS5975, which introduces the temporary works co-ordinator (TWC) as a key figure. This course explains the role and the overall management context within which it sits. High risk can occur on small as well as larger sites hence understanding the essentials of good safety risk management, as outlined in BS5975, is relevant for projects of all sizes. This course will give the delegate thorough knowledge of the Temporary Works Co-ordinator role however this does not alone make a delegate competent, as this requires other attributes e.g. experience. Aims and Objectives: This course is not a temporary works awareness course. It is only concerned with the process of co-ordination of temporary works, commonly expressed through the role of the Temporary Works Co-ordinator. Attendance does not confer competency as a Temporary Works Co-ordinator. The course gives emphasis, throughout, to:  – The importance of communication, co-ordination, co-operation and competency. The ‘4Cs’.  – Risk management: safety and also business related Allowing the Temporary Works Co-ordinator (TWC) to:  – Understand the need for and duties of a TWC  – Understand the role of others  – Have a detailed knowledge and understanding of BS5975 in respect of this role. Assessment: The method of assessment will be by multiple-choice questions at the end of the course as well as being expected to be interactive during the course. Course Attendance: Delegates are required to attend both sessions, since without full attendance and achievement in the examination the Temporary Works Co-ordinator Training Course cannot be made. Delegates must attend the days in order and, where not on consecutive days, must complete the course within two weeks. Delegates unable to attend both days due to extenuating circumstances (e.g. certificated sickness) will need to enrol onto a new course in order to maintain continuity of learning outcomes and attend both days again. It is expected that experienced and competent Temporary Works Co-ordinators will attend this course. Competence comes from a mixture of education, training and experience and should be judged by an appropriate senior individual, usually referred to as the Designated Individual (DI). Training is considered an essential element of Temporary Works Co-ordinator competence. Background Publications: This course, including its group work and exercises, is constructed around BS5975:2008 +A1:2011. For Open Courses Delegates should bring a copy with them in order not to be significantly disadvantaged. For in house courses it is expected that the Tutor will tailor the course around the organisation procedures,providing they are comprehensive and follow the philosophy of BS5975. In these cases delegates will need a copy of their own procedures. In the absence of adequate procedures delegates will need a copy of the BS itself. Although the following is not mandatory, delegates may find the following useful – BS EN12811-1:20031 Temporary works equipment. Scaffolds. Performance requirements and general design – BS EN12812:2008. Falsework ‐ performance requirements and general design – BS EN12813:2004. Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design – NASC TG20/13 plus supplement 1 – NASC TG9:12

Presentation skills can be defined as a set of abilities that enable an individual to: interact, transmit the messages with clarity, engage the audience in the presentation, interpret and understand the mindsets of the listeners.

Introduction: “Co-ordinating the temporary works process” This two day course is designed to assist those on site who have responsibility for managing all forms of temporary works. It is also designed to give confidence to senior management and those who engage contractors have reached an assessed standard of knowledge. The course has the support of a number of organisations: Temporary Works Forum CECA, UKCG, HSE and FMB. The support of these organisations offers transferability of the course within industry. Temporary works are usually safety and business-critical and require careful co-ordination. An accepted way of achieving this is through the adoption of the management process outlined in BS5975, which introduces the temporary works co-ordinator (TWC) as a key figure. This course explains the role and the overall management context within which it sits. High risk can occur on small as well as larger sites hence understanding the essentials of good safety risk management, as outlined in BS5975, is relevant for projects of all sizes. This course will give the delegate thorough knowledge of the Temporary Works Co-ordinator role however this does not alone make a delegate competent, as this requires other attributes e.g. experience. Aims and Objectives: This course is not a temporary works awareness course. It is only concerned with the process of co-ordination of temporary works, commonly expressed through the role of the Temporary Works Co-ordinator. Attendance does not confer competency as a Temporary Works Co-ordinator. The course gives emphasis, throughout, to:  – The importance of communication, co-ordination, co-operation and competency. The ‘4Cs’.  – Risk management: safety and also business related Allowing the Temporary Works Co-ordinator (TWC) to:  – Understand the need for and duties of a TWC  – Understand the role of others  – Have a detailed knowledge and understanding of BS5975 in respect of this role. Assessment: The method of assessment will be by multiple-choice questions at the end of the course as well as being expected to be interactive during the course. Course Attendance: Delegates are required to attend both sessions, since without full attendance and achievement in the examination the Temporary Works Co-ordinator Training Course cannot be made. Delegates must attend the days in order and, where not on consecutive days, must complete the course within two weeks. Delegates unable to attend both days due to extenuating circumstances (e.g. certificated sickness) will need to enrol onto a new course in order to maintain continuity of learning outcomes and attend both days again. It is expected that experienced and competent Temporary Works Co-ordinators will attend this course. Competence comes from a mixture of education, training and experience and should be judged by an appropriate senior individual, usually referred to as the Designated Individual (DI). Training is considered an essential element of Temporary Works Co-ordinator competence. Background Publications: This course, including its group work and exercises, is constructed around BS5975:2008 +A1:2011. For Open Courses Delegates should bring a copy with them in order not to be significantly disadvantaged. For in house courses it is expected that the Tutor will tailor the course around the organisation procedures,providing they are comprehensive and follow the philosophy of BS5975. In these cases delegates will need a copy of their own procedures. In the absence of adequate procedures delegates will need a copy of the BS itself. Although the following is not mandatory, delegates may find the following useful – BS EN12811-1:20031 Temporary works equipment. Scaffolds. Performance requirements and general design – BS EN12812:2008. Falsework ‐ performance requirements and general design – BS EN12813:2004. Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design – NASC TG20/13 plus supplement 1 – NASC TG9:12

Businesses that don't control their costs don't stay in business. How well are you doing? Is everyone in your organisation sufficiently aware of costs, managing them effectively and maximising opportunities to reduce them? If there is scope for improvement, this course will help get you back on track. It will demonstrate that cost reduction is so much more than cost control and cost cutting. True cost management is about being aware of costs, seeking to reduce them through good design and efficient operating practices whilst taking continuing action on overspending. This course will develop the participants' skills in: * Being aware of costs at all times * Seeking cost reduction from the start (including life-cycle costing) * Appraising projects / production to identify and take out risk * Understanding real budgeting * Using techniques such as ZBB and ABC where appropriate * Ensuring cost reports lead to action * Managing a cost reduction process that delivers Benefits to the organisation will include: * Identification of cost reduction and business improvement opportunities * Better reporting and ownership of costs * Greater awareness and control of everyday costs 1 INTRODUCTION - THE COST MANAGEMENT PROCESS * The risks of poor cost control * Capital and revenue costs * The importance of cost awareness * The importance of cost reduction * Cost management - the key aspects * How to build a cost management and control process checklist for your areas of responsibility 2 COST REMOVAL - TAKING OUT COSTS * Cost awareness * Costs of poor design / poor processes * Value engineering * Removing redundant costs 3 THE NEED FOR COMMERCIAL, TECHNICAL AND FINANCIAL APPRAISALS * Understand the problems before cash is committed and costs incurred * Making the effort to identify commercial and technical risk * The time value of money - DCF techniques for long term projects * Cost models for production processes and projects * Costing models - project appraisals * The use of spreadsheets to identify sensitivity and risk * How to focus on risk management 4 BUDGETING - PROPER BUDGETING CHALLENGES COSTS * The philosophy of the business - are costs an issue? * The importance of having the right culture * The need for detailed business objectives * Budgetary control measures * Designing budget reports - for action 5 ZERO-BASED BUDGETING (ZBB) - THE PRINCIPLES * Much more than starting with a clean sheet of paper * What ZBB can achieve * The concept of decision packages - to challenge business methods and costs * Only necessary costs should be incurred * A review of an operating budget - demonstrating what ZBB challenges and the costs it may lead to being taken out 6 AWARENESS OF OVERHEADS AND OTHER COSTS * Definitions of cost - direct and indirect * Dealing with overheads - what is meant by allocation, absorption or apportionment? * The apparent and real problems with overheads * Different ways of dealing with overheads * Review of overhead allocation methods and accounting and reporting issues 7 OVERHEADS AND PRODUCT COSTING * Activity-based costing (ABC) - the principles * Where and how the ABC approach may be helpful * Know the 'true' cost of a product or a project * Should you be in business? Will you stay in business? * Identifying weaknesses in a traditional overhead allocation * How ABC will help improve product or service costing * Identifying which products and activities should be developed and which abandoned 8 COST REDUCTION CULTURE * The need for cost reports * What measures can be used to identify over-spends as early as possible * Cost control performance measures and ratios 9 DESIGN OF COST CONTROL REPORTS * Reports should lead to action and deliver * Selecting cost control measures which can be acted upon * Practice in designing action reports 10 COURSE SUMMARY - DEVELOPING YOUR OWN COST ACTION PLAN * Group and individual action plans will be prepared with a view to participants identifying their cost risks areas and the techniques which can be immediately applied to improve costing and reduce costs

Our Forensic Accounting Course is designed to help investment analysts detect earnings manipulation. It focuses on creative accounting rather than conducting detailed forensic analysis but we explain the tools short sellers employ to detect fraud and some of the techniques we used at hedge funds to identify short opportunities.