Name: Advanced Process Safety Engineering
Price: 3499 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>This 5 full-day course will cover all aspects of gas turbines, co-generation and combined cycle power plants. It will cover in detail all the components of these types of power plants such as: compressors, gas and steam turbines, heat recovery steam generators, deaerators, condensers, lubricating systems, instrumentation, control systems, and economics.</p>
<p>The design, selection considerations, operation, maintenance, pay-back period, economics of co-generation plants and combined cycles, as well as, emission limits, reliability, monitoring and governing systems are also covered in detail. This course will also provide up-dated information in respect to all the significant improvements that have been made to co-generation and combined cycles power plants, during the last two decades.</p>
<p>The course will illustrate through sophisticated computer simulation how gas turbines, co-generation and combined cycle plants perform under steady-state and transient conditions. In addition, the participants will learn how to use the computer simulation program which provides the following benefits:</p>
<ol>
<li>Allow the operator to extend the gas turbine operating period by avoiding unnecessary outages and maintenance activities.</li>
<li>Determination of essential gas turbine maintenance activities to reduce the duration of outages.</li>
<li>Profit optimization of co-generation and combined cycle plants.</li>
<li>Minimization of the environmental emissions of co-generation and combined cycle plants.</li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Power Plant Computer simulation:</span></strong><span> Gain a thorough understanding of computer simulation of gas turbines, co-generation, and combined cycle plants.</span></li>
<li><strong><span>Power Plant Components and Systems: </span></strong><span>Learn about all components and subsystems of the various types of power plants such as gas turbines, co-generation and combined cycle plants</span></li>
<li><strong><span>Power Plants Economics: </span></strong><span>Examine the advantages, applications, performance and economics of power plants such as: gas turbines, co-generation, and combined cycle plants</span></li>
<li><strong><span>Power Plant Equipment: </span></strong><span>Learn about various power plant equipment including: compressors, turbines, governing systems, combustors, deaerators, feed water heaters, etc.</span></li>
<li><strong><span>Power Plant Maintenance:</span></strong><span> Learn all the maintenance activities required for power plants such as: gas turbines, co-generation plants and combined cycles to minimize their operating cost and maximize their efficiency, reliability, and longevity</span></li>
<li><strong><span>Power Plant Environmental Emissions:</span></strong><span> Learn about the monitoring and control of environmental emissions.</span></li>
<li><strong><span>Power Plant Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation and control systems of gas turbines, co-generation and combined cycles power plants</span></li>
<li><strong><span>Power Plant Reliability and Testing:</span></strong><span> Increase your knowledge of power plant predictive and preventive maintenance, reliability and testing.</span></li>
<li><strong><span>Power Plant Selection and Applications:</span></strong><span> Gain a detailed understanding of the selection considerations and applications of power plants such as: gas turbines, co-generation and combined-cycle power plants</span></li>
<li><strong><span>Power Plant Profitability:</span></strong><span> Learn about the reliability, life cycle cost, profitability, refurbishment, and life extension methods for gas turbines, co-generation and combined cycle power plants.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' second edition, published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Practical manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Gas Turbines, Co-Generation and Combined Cycle Power Plants

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control. With the growing importance of grid integration of renewables and the interest in smart grid technologies, it is more important than ever to understand the fundamentals that underpin electrical power systems.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Basic Terminology and Concepts of Electrical Systems:</strong> Gain an understanding of the basic terminology and concepts of electrical systems and the structure of a power system</li>
<li><strong>Transmission Line Parameters:</strong> Learn in detail all the transmission line parameters including line resistance, line inductance, transposition of transmission lines, and capacitance of transmission lines</li>
<li><strong>Insulators:</strong> Understand thoroughly all the various types of insulators, pin type insulators, suspension type or disc insulators, strain insulators, and testing of insulators</li>
<li><strong>High-Voltage Direct Current Transmission:</strong> Determine the advantages and disadvantages of high voltage direct current transmission, and gain an understanding of all the features of high-voltage direct current transmission</li>
<li><strong>Substations and Neutral Grounding:</strong> Gain a detailed understanding of all substation equipment, factors governing the layout of substations, station transformers, elements to be earthed in a substation, power system earthing, earthing transformers, bus bar arrangements and gas-insulated substations</li>
<li><strong>Distribution System:</strong> Learn about the effects of voltage on the conductor volume, distributor fed from one end, distributors fed from both ends at the same voltage, distributors fed from both ends at different voltages, and alternating current distribution</li>
<li><strong>Circuit Breakers:</strong> Learn about the classification of circuit breakers, plain-break oil circuit breakers, air break circuit breaker, air blast circuit breakers, vacuum circuit breakers, SF6 circuit breakers, rating and testing of circuit breakers</li>
<li><strong>Relaying and Protection:</strong> Learn all the requirements of relaying, zones of protection, primary and backup protection, classification of relays, electromagnetic relays, induction relays, feeder protection, phase fault protection, reactance relay, static overcurrent relay, differential protection, transformer protection, Buchholz relays, alternator protection restricted earth fault protection, rotor earth fault protection, and negative-sequence protection</li>
<li><strong>Economic Operation of Power Systems:</strong> Gain an understanding of steam power plants, heat rate characteristics and characteristics of hydro plants</li>
<li><strong>Load Frequency Control:</strong> Learn about speed governing mechanism, speed governor, steady state speed regulations and adjustment of governor characteristics</li>
<li><strong>Voltage and Reactive Power Control:</strong> Gain an understanding of impedance and reactive power, system voltage and reactive power, voltage regulation and power transfer</li>
<li><strong>Renewable Energy Sources:</strong> Learn about solar power, wind power, geothermal energy, biomass and tidal power</li>
<li><strong>Restructuring of Electrical Power Systems:</strong> Gain an understanding of smart grids, smart grid components, smart grid benefits, and open smart grid protocol</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Introduction to Power Systems

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Time is money in all industries. For the Oil &amp; Gas industry, this is no exception and the ability to maximise return on investment is all related to where the Oil is and how easily and quickly we can get that product to the customer. Whether in a technical, managerial or supporting role, you are a valuable asset in ensuring that project delivery targets are met and profits are realised. As Petroleum Engineering (PE) activities continue to increase, professionals like you must grasp the language and technology of PE operations in order to maximise expenditures throughout the producing life of a well.</p>
<p>Petroleum Engineering equipment and procedures have a unique language that must be conquered for maximum benefit. Clear and understandable explanations of rig equipment, completion equipment, operations procedures, and their complex interactions provide an excellent foundation for smooth communication and increased efficiency in inter-department project team efforts. A confident understanding of the technical jargon and a visual appreciation of the various pieces of equipment used provides for an overall 'big picture' of the industry value chain. This serves as an excellent foundation for smooth communication and increased efficiency in inter-department project team efforts.</p>
<p>This course can also be offered through Virtual Instructor Led Training (VILT) format.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By the end of this course, the participants will be able to:</p>
<ul>
<li>Define the role of Petroleum Engineering and its interaction between other departments</li>
<li>Describe terms used in the Oil &amp; Gas industry such as Surface/Subsurface, Upstream, Midstream and Downstream</li>
<li>Describe the Appraisal of Oil &amp; Gas Discoveries, the Cost Estimations, Economics &amp; Reserves</li>
<li>Explain what is the Formation, how do we connect to it, and how do we ensure best value</li>
<li>Describe how to construct a well, select the equipment &amp; methods, understand the duration that the well is required to perform for</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course will benefit <strong>those in geology, reservoir engineering, equipment and maintenance, and non-petroleum engineering technical professionals as well as forward-looking executives in the following fields who are interested to enhance their knowledge and awareness of the drilling process for increased productivity and contribution to the team that they're supporting</strong>:</p>
<ul>
<li>Accounting</li>
<li>Administration</li>
<li>Business Development</li>
<li>Commercial</li>
<li>E &amp; P IT</li>
<li>Estimation &amp; Proposal</li>
<li>Finance &amp; Administration</li>
<li>Finance</li>
<li>HSE</li>
<li>General Management</li>
<li>Joint Ventures</li>
<li>Legal</li>
<li>Logistics</li>
<li>Materials Planning</li>
<li>Planning &amp; Budgeting</li>
<li>Procurement</li>
<li>Sourcing</li>
<li>Supply Chain</li>
<li>Tender Contract</li>
<li>Training</li>
<li>Drilling Fluids</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your Expert Course Trainer has over 40 years of experience in the Oil &amp; Gas industry. During that time, he has worked exclusively in well intervention and completions. After a number of years working for intervention service companies (completions, slickline &amp; workovers), he joined Shell as a well service supervisor. He was responsible for the day-to-day supervision of all well intervention work on Shell's Persian/Arabian Gulf platforms. This included completion running, coil tubing, e-line, slickline, hydraulic workovers, well testing and stimulation operations. An office-based role as a senior well engineer followed.</p>
<p>He was responsible for planning, programming and organising of all the well engineering and intervention work on a number of fields in the Middle East. He had a brief spell as a Site Representative for Santos in Australia before joining Petro-Canada as Completions Superintendent in Syria, then moved to Australia as Completions Operations Superintendent for Santos, before returning to Shell as Field Supervisor Completions and Well Interventions in Iraq where he carried out the first ever formal abandonment of a well in the Majnoon Field. While working on rotation, he regularly taught Completion Practices, Well Intervention, Well Integrity and Reporting &amp; Planning courses all over the world. In 2014, he started to focus 100% on training and became the Technical Director for PetroEDGE.</p>
<p>Since commencing delivering training courses in 2008, he has taught over 300 courses in 31 cities in 16 countries to in excess of 3,500 participants.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Petroleum Engineering for Non-Petroleum Engineering Technical Professionals

Reading

Nottingham

Dickson Training Ltd

First Line Management Course

Classroom Course

Online Course

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong><em> </em></h2>
<p>This 5 half-day virtual course provides a detailed description of all the methods used to reduce the heat rate (increase the efficiency) of pulverized coal and circulating fluidized bed (CFB) coal power plants. All the processes, operational and maintenance activities, capital projects, technical options, potential initiatives and incentives to implement upgrades/repairs for increasing the plant efficiency will be covered in detail.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Calculate the Heat Rate of Coal Power Plants:</strong> Learn all the methods used to calculate the heat rate of coal power plants</li>
<li><strong>Benefits of Lowering the Heat Rate of Coal Power Plants:</strong> Understand all the benefits of lowering the heat rate of coal power plants</li>
<li><strong>Methods Used to Improve Coal Power Plants Heat Rate:</strong> Gain a thorough understanding of all the methods used to improve the heat rate of coal power plants</li>
<li><strong>Processes, Operational and Maintenance Activities:</strong> Discover all the processes, operational and maintenance activities used to improve the heat rate of coal power plants</li>
<li><strong>Capital Projects Used to Improve the Heat Rate:</strong> Learn about all the capital projects used to improve the heat rate of coal power plants</li>
<li><strong>Technical Options for Improving the Heat Rate:</strong> Understand all the technical options used to improve the heat rate of coal power plants</li>
<li><strong>Potential Initiatives and Incentives to Implement Upgrades/Repairs for Improving the Heat Rate: </strong>Discover all the potential initiatives and incentives to implement upgrades/repairs for improving the heat rate of coal power plants</li>
<li><strong>Factors Affecting Coal Power Plant Efficiency and Emissions:</strong> Learn about all the factors which affect coal power plants efficiency and emissions</li>
<li><strong>Areas in Pulverized Coal and Circulating Fluidized Bed (CFB) Power Plants where Efficiency </strong><strong>Loss Can Occur:</strong> Discover all the areas in pulverized coal and circulating fluidized bed (CFB) power plants where efficiency loss can occur</li>
<li><strong>Optimize the Operation of Coal Power Plant Equipment and Systems to improve the Plant Heat Rate:</strong> Understand all the techniques and methods used to optimize the operation of coal power plant equipment and systems to improve the plant heat rate</li>
<li><strong>Coal Power Plant Equipment and Systems:</strong> Learn about various coal power plant equipment and systems including boilers, superheaters, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The VILT will be delivered online in 5 half-day sessions comprising 4 hours per day, with 1 x 10 minutes break per day, including time for lectures, discussion, quizzes and short classroom exercises.</p>
<p>Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end the course.</p>
<p>The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Heat Rate Optimization of Coal Power Plants

Redhill

<h3><b>GPON and FTTx networks training course description</b></h3>
      <p>  Designed to benefit those requiring an in depth
knowledge of the principles and applications of Ten
Gigabit and Gigabit Passive Optical Networking and
Fibre to the X in NG Networks applications and their
associated equipment, its flexibility and function within
a modern transmission network.<br />
Using an effective mix of 'hands on' equipment
instruction and correlation to theory based learning the
delegate will gain a complete understanding of the
equipment and the tasks to be undertaken in a real life
situation.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
  <li>Compare PON/FTTx systems.</li>
																				<li>Explain network elements and designs.</li>
                    <li>Support applications and network interfaces.</li>
                    <li>List circuit provisioning and bandwidth requirements.</li>
                    <li>Understand upstream &amp; downstream issues.</li>
                     <li>Describe headend &amp; network elements/OLT-ONT.</li>
                     <li>Perform network testing with OTDR test sets.</li>
				</ul>
        <h5>
        <b>GPON and FTTx networks training course details</b></h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
           <p>Anyone working with GPON and FTTx.</p>
              
							<li><b>Prerequisites:</b></li>
							
                 <p>Introduction to data communications and networking.</p>
              
							<li><b>Duration</b></li>
							
              <p>5 days
						</p>
              
							
               
              
						</ul>
					</div>
				</div>
     <h3><b>GPON and FTTx training course contents</b></h3>
      <ul>
				<li>FTTN, FTTC, FTTH </li><p>
SMF, MMF, Fibre safety and properties (dispersion/attenuation), Fibre reel cables and types, Fibre installation and air blown fibre, Transmitters and receivers - power budget/laser classes. Fibre to the home (FTTH), FTTC (Fibre to the Cabinet), FTTN (Fibre to the node) , FTTD (Fibre to the desk), FFTH topologies and wavelengths, Active or passive optical network.

</p><li>WDM equipment and GPON OSP design </li><p>
Wavelength considerations, WDM/DWDM/CWDM, EDFA optical amplification, AWG (Arrayed Waveguide Grating) splitters , Couplers (splitters) and losses, Optical splitters 1x2, 1x4, 1x8, 1x16, 1x32, 1x64, 2x64.

</p><li>PON variants </li><p>
Gigabit passive optical network (GPON), Gigabit Ethernet passive optical network (GEPON), Time division PON (TDM-PON), Wave Division Multiplexing PON (WDM-PON), 1Gbps, 10Gbps, 40Ggps, 100Gbps FSAN (Full Service Access Network) NGA (Next Generation Access), Strategies for TDM-PON to WDM-PON migration, Architecture of NG-PON (hybrid WDM/TDM PON), Additional services than triple play.

</p><li>GEPON design </li><p>
GPON OSP centralized and distributed design, GPON PON splitters x4 x8 x32, Fibre splice trays /cassette trays &amp; enclosures, GPON field testing and installation verification, GPON physical layer testing, Optical time domain reflectometer (OTDR), Optical power source &amp; meter, Optical return loss (ORL), APON/BPON/GPON/EPON comparisons.

</p><li>GPON ITU-T G.984.1 </li><p>
Reference model, terminology &amp; architecture, Access network system management functions. ONT &amp; OLT functional block examples. FTTx scenarios, 4 switching arrangements for external access network backup.

</p><li>GPON ITU-T G.984.2 </li><p>
Physical layer, Enhancement band, Bit rate and wavelengths, FEC and RAMAN.

</p><li>GPON ITU-T G.984.3 </li><p>
Frame structure, GPON encapsulation method (GEM), GTC adaptation and framing sublayer protocol stack, Status reporting &amp; traffic monitoring DBA (SR-DBA &amp; TM-DBA), Transmission container (T-CONT) types, Downstream &amp; upstream multiplexing, GEM port identifier, Media access control and ONU registration, Extended bandwidth assignment model scheduling architecture, PLOAM &amp; alarm messages, Downstream &amp; Upstream FEC, Process order in a GTC transmit flow.

</p><li>GPON ITU-T G.984.4 and G.988 ONT management and control interface (OMCI) </li><p>
Management interface, Reference model, Typical ONT with SCTE 55-1 or SCTE 55-2 compliancy.

</p><li>GPON ITU-T G.984.5 enhancement band </li><p>
Band options, GPON NGA, Wavelength allocation.

</p><li>GPON ITU-T G.984.6 optical reach extension (G.984.re) </li><p>
Reach extension (RE), OA-based and OEO-based reach extenders, Protection, Reach extender with OTDR blocking filters (BF) and bypass (BYP) filters.

</p><li>GPON ITU-T G.984.7 long reach </li><p>
Quiet Window.

</p><li>10-GPON ITU-T G.987.1 (XG-PON) </li><p>
Scenarios, reference access network architecture, XG-PON with G-PON through WDM1r, G-PON and XG-PON wavelength allocation, G-PON and XG-PON co-existence with video overlay option, RE migration scenarios.

</p><li>G.989 40Gbps XG-PON2 </li><p>
Functional reference architecture, NG-PON2 system coexistence with legacy systems, Definitions of legacy compatibility terminology.

</p><li>GPON issues and standards </li><p>
GPON components GPON OLT / GPON ONT, GPON management, Operational support systems (OSS), Network management systems (NMS), OMCI (ONT Management control interface), RG (Residential gateway), Data and prioritised voice channel product, GPON broadband-forum standards, Broadband-forum , TR-069 and TR-156, HPNA (home phone network alliance), Powerline carrier (PLC), GPON DLNI G.hn or G.9960, MOCA, FTTH council certification standard for network certification. Fibre-connected home badge, Ethernet in the first mile (EFM), GPON frame synchronization to network timing, Direct clock synchronization interface (BITS), Multiservice access platform (MSAP), Software planning tool, Superconnected cities / voucher scheme.

</p><li>Hands on practical assignments </li><p>
Single and multimode fibre recognition, Fibre Cleaning methods, Checking cleaning with an optical microscope, Optical light source and optical power meter referencing, PON splitter and fibre drum testing with an optical power meter, 6km classroom passive optical network testing with an OTDR at 1310/1550nm, Using decibels (dB's) and decibel milliwats (dBm's), Designing networks up to 20km long using vendor specifications (power budget), Fault finding with a visible fault locator.
</p>
      </ul>

Systems & Network Training

Network & Security

Network Engineer

GPON and FTTx networks

General Admission

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines. This course will also cover in detail all the components of these turbines, instrumentation, control systems, governing systems, and selection criteria.</p>
<p>The main focus of this course will be on the failure modes of steam turbine components, causes and solutions for component failure, maintenance, refurbishment and overhaul, rotor dynamic analysis of steam turbines, and computer simulation of steam turbine rotor dynamics. All possible failure modes of steam turbine components and the maintenance required to prevent them will be discussed in detail. Examples of rotor dynamic analysis, and stability criteria will be covered thoroughly.</p>
<p>This course will also provide up-dated information in respect to all the methods used to enhance the availability, reliability, and maintainability of steam turbines, increase the efficiency and longevity of steam turbines, and improve the rotor dynamic stability. This course will also cover in detail all steam turbine valves, jacking oil system, turning gear, turbine supervisory system, steam turbine monitoring technology, validation, and verification tests, performance testing of steam turbines and steam turbine codes especially ASME PTC6.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Steam Turbine Components and Systems:</span></strong><span> Learn about all components and systems of the various types of steam turbines such as: stationary and rotating blades, casings, rotor, seals, bearings, and lubrication systems</span></li>
<li><strong><span>Steam Turbine Failure Modes, Inspection, Diagnostic Testing, and Maintenance:</span></strong><span> Understand all the failure modes of steam turbine components, causes and solutions of steam turbine component failure, inspection, diagnostic testing, and all maintenance activities required for steam turbines to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Steam Turbine Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation, control systems, and governing systems of steam turbines</span></li>
<li><strong><span>Steam Turbine Reliability and Maintainability:</span></strong><span> Increase your knowledge about all the methods used to enhance the reliability and maintainability of steam turbines as well as the predictive and preventive maintenance required for steam turbines</span></li>
<li><strong><span>Steam Turbine Selection and Applications:</span></strong><span> Gain a detailed understanding of the selection considerations and applications of steam turbines in steam power plants, co-generation, combined-cycle plants, and drivers for compressors pumps, etc</span></li>
<li><strong><span>Steam Turbine Valves, Load-Frequency Control, Turbine Bypass Systems, and Steam Turbine Superheater Attemperators:</span></strong><span> Gain a thorough understanding of all steam turbine valves, load-frequency control, turbine bypass systems, and steam turbine superheater attemperators</span></li>
<li><strong><span>Jacking Oil System and Turning Gear:</span></strong><span> Learn about the turbine jacking oil system and turning gear operation</span></li>
<li><strong><span>Turbine Supervisory System:</span></strong><span> Gain a thorough understanding of the turbine supervisory system</span></li>
<li><strong><span>Steam Turbine Monitoring Technology, Validation, and Verification Tests for Power Plants:</span></strong><span> Learn about steam turbine monitoring technology, validation, and verification tests for power plants</span></li>
<li><strong><span>Steam Turbine Codes:</span></strong><span> Learn about steam turbine codes including ASME PTC6, DIN Test Code, and International Electrotechnical Commission (IEC) Doc 1, IEC Doc B</span></li>
<li><strong><span>Steam Turbine Rotor Dynamic Analysis, Campbell, Goodman, and SAFE Diagrams: </span></strong><span>Gain a thorough understanding of steam turbine rotor dynamic analysis, Campbell, Goodman, and SAFE diagrams</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>STEAM TURBINE TECHNOLOGY MANUAL (includes practical information about steam turbines maintenance, testing, and refurbishment - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Steam Turbine Technology

Stoke on Trent

<h2>Course Details</h2><p>This course covers relevant health and safety laws including Lifting Operations and Lifting Equipment Regulations 1998 (LOLER).

ð Course Contents
Health and safety legislation
Health and Safety at Work Act 1974
Lifting Operations and Lifting Equipment Regulations 1998 (LOLER)
Provision and Use of Work Equipment Regulations 1998 (PUWER)
Management of health and safety regulations
Inspection definitions and general lifting procedures
Marking of lifting equipment
Safe use of wire ropes
Sling loads and angles
Safe use of fabric and chain slings, shackles and eyebolts
Establishing load weight and center of gravity

If no dates are available please call the team on 01782 438813 for available dates.</p>

You Can Do It .Training

Construction Safety

Lifting Operations & Lifting Equipment Regulations (LOLER)

Site Management Safety Training Scheme (SMSTS)

Lifting & Handling

Banksman

Lifting Operations

Lifting Equipment Inspection

This course covers relevant health and safety laws including Lifting Operations and Lifting...

Slinger Banksman (On-Site)

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual instructor Led Training (VILT)</strong><em> </em></h2>
<p>The Subsea Production Engineering Virtual instructor Led Training (VILT) course provides an overview of all of the functionalities and key interfaces of subsea equipment. The VILT course will refer to relevant industry engineering standards for subsea equipment, subsea tie-backs and critical operational requirements. The sessions will cover challenges associated with equipment design and installability, as well as a new module on subsea tie-backs.</p>
<p>The primary learning objectives for this VILT course are met through a combination of interactive presentations, discussion and exercises.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By the end of this VILT course, participants will be able to:</p>
<ul>
<li>Apply the requirements of related industry standards (API 6A/ 17D, API 17A etc.) engineering standards</li>
<li>Understand the barrier and qualification requirements</li>
<li>Identify the barriers in place given a specific mode of operation</li>
<li>Evaluate and select which tree alternatives are valid based on the key design drivers</li>
<li>Identify and describe the key design drivers</li>
<li>Explain the importance of well kill rate</li>
<li>Describe which tree alternatives are valid for certain scenarios based on an evaluation of the key tree design requirements</li>
<li>Examine what effects subsurface requirements may have on tree design</li>
<li>Understand the challenges associated with designing equipment for manufacturability and installability</li>
<li>Recognise the implications of design changes to specific components and the effects on transportation and installation (such as what type of vessels, lifting equipment, and tools to use and the logistical requirements)</li>
<li>Recognise the implication of design changes on manufacturability of subsea equipment</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course provides a comprehensive understanding of the equipment used in subsea production systems. It is designed for <strong>petroleum engineers, production engineers, subsea project engineers and is also highly suitable for cost, planning, offshore installation and offshore operations engineers</strong>.</p>
<p>Anyone directly or indirectly involved with subsea equipment will benefit from attending this VILT course - from engineers installing the equipment to procurement staff looking to understand more.</p>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The VILT course will be delivered online in <strong>4 half-day sessions comprising</strong> <strong>4 hours per day</strong>, with 2 breaks of 10 minutes per day.</p>
<p>Course Duration: 4 half-day sessions, 4 hours per session (16 hours in total).</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Most of his working life, your expert course leader has been in a role that has enabled him to pass on skills and knowledge to others. A full-time role in Training and Development came about in 1996 with the offer to take up a full-time teaching post at Aberdeen College. In 1998, he was recruited by Kvaerner Oilfield Products, an Oil &amp; Gas industry company, specialising in Subsea Control Systems, to develop and implement a Training &amp; Competence program acceptable for its staff of over 600 and their client companies - a challenge he could not resist. In 2003, he broadened his horizons and became an independent Training &amp; Development consultant. Building a reputation for delivering training and development to the Oil &amp; Gas industry to the highest standards, he later joined Jee Ltd, a leading subsea engineering and training company based in Aberdeen. He was tasked with a wide portfolio of training, coaching &amp; mentoring to achieve high levels of<br />
competence for the client's staff and customers.</p>
<p>He is also a Science and Engineering Ambassador (Scotland), promoting the need for engineers and technicians for Scotland's industries, a frequent consultant to the European Economic &amp; Social Committee for standardising Vocational Skills training and competence throughout the EU. He holds memberships in the Society of Operations Engineers, Chartered Institute of Personnel &amp; Development and Society of Underwater Technologies.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Subsea Production Engineering - Incorporating Subsea Tie-backs - Virtual Instructor Led Training

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Managing process hazards in the hydrocarbon and chemical processing industries is a critical function that requires relevant knowledge and skills due to the risks involved. The Advanced Process Safety Engineering course will discuss the interrelation of the various techniques of process safety for analysing, with a particular emphasis on engineering design aspects, as well as how to manage process hazards in a safe and effective way and how they can potentially be avoided.</p>
<p>In this 3 full-day advanced level course, the expert course leader will provide participants with insights and examples from his career and experience to show how their learning should be applied in real-life situations. Feedback and questioning is highly encouraged. Reference material and reports can be provided to give more information on any particular topic of interest. Individual and group exercises, tutored exercises and video case studies will be provided throughout the course to underpin the key learning points.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will acquire in-depth knowledge of:</p>
<ul>
<li>Risk management and 'As Low as Reasonably Practicable' (ALARP) principles.</li>
<li>Different aspects of process design that influence process safety.</li>
<li>Approach to 'inherently safer' design.</li>
<li>Defence in depth using 'layers of protection'.</li>
<li>Process for ensuring the technical integrity of safety-critical equipment.</li>
<li>Hazards associated with process materials.</li>
<li>Range of hazard identification and consequence modelling techniques.</li>
<li>Causes and mitigation of human error.</li>
<li>Reliability and availability of safety-critical protection equipment.</li>
<li>Role of engineered safety-critical equipment and systems.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is suitable for industry professionals who need to acquire a comprehensive understanding of process safety. This includes those who are required to make managerial decisions where process safety is a key consideration, those who are moving into process safety positions or those who wish to broaden their process safety knowledge within their existing discipline.</p>
<p>It is particularly suited for anyone involved in the design, operation, modification or maintenance of a major hazard installation, and will demonstrate a substantial understanding of process safety for those engaged in Continuous Professional Development or aiming for Chartered Engineer status.</p>
<p>This course will benefit professionals such as:</p>
<ul>
<li>Operations and maintenance supervisors</li>
<li>Process, mechanical and chemical engineers and technicians</li>
<li>Design engineers, project engineers and HSE managers</li>
<li>Control, automation and instrumentation engineers</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Advanced</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has 50 years' experience in chemical and process safety engineering. His early career included 20 years in design and project engineering with various fine chemical and pharmaceutical companies where he designed chemical processes, specified plant equipment and selected materials for highly corrosive and toxic processes, often where textbook data was not available. This was followed by 10 years in offshore oil and gas design projects where he was responsible for setting up a Technical Safety group to change design safety practices in the aftermath of the 1988 Piper Alpha disaster. In recent years, he has been called upon to conduct various offshore and onshore incident investigations.</p>
<p>His career has given him experience in project engineering, project management, process design and operations, safety engineering and risk management. He is a Fellow of the UK Institution of Chemical Engineers. He served on the Scottish Branch committee, and was elected chairman for a two-year term in 1991. He has also been chairman of the Safety and Reliability Society - North of Scotland Branch.</p>
<p>He has delivered training courses in Process Hazard Analysis (HAZOP and HAZID), Process Safety Management, Hazard Awareness, Risk Assessment, Root Cause Analysis, Failure Modes &amp; Effect Analysis and has lectured on Reliability Analysis to the M.Sc. course in Process Safety and Loss Prevention at Sheffield University. In addition to delivering training courses, he currently facilitates HAZOP / HAZID / LOPA studies and undertakes expert witness roles advising lawyers engaged in contractual disputes, usually involving the design or construction of chemical plants or Oil &amp; Gas production facilities, or criminal prosecutions.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Advanced Process Safety Engineering

Manchester

Bingley

Cardiff

Milton Keynes 

Birmingham

Bedford

<div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><h2 fr-original-style="" style="box-sizing: border-box;">INTRAMUSCULAR, INTRADERMAL &amp; SUBCUTANEOUS INJECTION COURSE (GPT601)<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">CLASSROOM or VIRTUAL CLASSROOM (with online theory)</span></h2></div><section fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-testid="columns" fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-mesh-id="comp-kl8214n52inlineContent" data-testid="inline-content" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214n52inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">Learn how to administer vaccines or injections ...&nbsp;</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Nationally Recognised Qualification</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes IM, ID and Sub-Cut Injection methods</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OCN Accredited - Level 4 (Foundation Degree - FDSc)</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Covers all steps to safely perform a vaccination</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Use same techniques and skills for aesthetic therapies</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes B12, Vitamin C and other treatments</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Essential qualification for all injections</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Basic understanding of English language required</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OPEN TO ALL APPLICANTS</p></li></ul><div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">About this course</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">Learning Outcomes</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">After the course</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">PART 1 - Theory: complete online at<br fr-original-style="" style="box-sizing: border-box;">home or work and download a certificate of completion</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Injections - Aesthetics - B12, Vit C etc.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">78 UK &amp; Eire training locations</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OCN Accredited at Level 4 (FDSc)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Medical training standards throughout</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Skills for Health &amp; WHO compliant</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" id="isPasted" fr-original-style="color:#0D73B7;">Learning Outcomes</span></p><div data-mesh-id="comp-kl8214o43inlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214o43inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Train up to point of first vaccination or injection&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">All theory and practical skills required to perform a safe procedure</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Covers all essential theory and skill-set development to meet medical standards</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understand the procedures used to set up &nbsp;a manage and administer a vaccine</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Post-injection management and how to avoid critical complications</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Correct client care and aftercare</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes legal, consent and documentation</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" id="isPasted" fr-original-style="color:#0D73B7;">After the course</span></p><div data-mesh-id="comp-kl8214oainlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214oainlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Safely and competently administer a vaccine or drug treatment (ie. B12)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Correct client management before, during injection and safe after-care</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understanding equipment types and appropriate choices</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understand vaccine management control</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Appreciate legal and professional responsibilities</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Offer injection therapies to clients - vitamin supplements</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Administer in hospitals, GP Surgeries and Outreach Centres</p></div></div></div></div></div></div></div></div></div></div></div></section>

INTRAMUSCULAR, INTRADERMAL & SUBCUTANEOUS INJECTION COURSE (GPT601)
CLASSROOM or VIRTUAL CLASSROOM (with online theory)
Learn how to administer vaccines or injections ... 
Nationally Recognised Qualification
Includes IM, ID and Sub-Cut Injection methods
OCN Accredited - Level 4 (Foundation Degree - FDSc)
Covers all steps to safely perform a vaccination
Use same techniques and skills for aesthetic therapies
Includes B12, Vitamin C and other treatments
Essential qualification for all injections
Basic understanding of English language required
OPEN TO ALL APPLICANTS
About this course
Learning Outcomes
After the course
PART 1 - Theory: complete online at
home or work and download a certificate of completion
PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom
Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines
Injections - Aesthetics - B12, Vit C etc.
78 UK & Eire training locations
OCN Accredited at Level 4 (FDSc)
Medical training standards throughout
Skills for Health & WHO compliant
Learning Outcomes
Train up to point of first vaccination or injection 
All theory and practical skills required to perform a safe procedure
Covers all essential theory and skill-set development to meet medical standards
Understand the procedures used to set up a manage and administer a vaccine
Post-injection management and how to avoid critical complications
Correct client care and aftercare
Includes legal, consent and documentation
After the course
Safely and competently administer a vaccine or drug treatment (ie. B12)
Correct client management before, during injection and safe after-care
Understanding equipment types and appropriate choices
Understand vaccine management control
Appreciate legal and professional responsibilities
Offer injection therapies to clients - vitamin supplements
Administer in hospitals, GP Surgeries and Outreach Centres

Geopace Training

Immunisation & Vaccination

Immunisation

Allied Health

Allied Health Professions (AHP)

Injection

Vaccination

Vaccinator

Medicine & Nursing

Learn how to administer vaccines or injections ...

    Nationally Recognised Qualification

    Includes IM, ID and Sub-Cut Injection methods

    OCN Accredited - Level 4 (Foundation Degree - FDSc)

    Covers all steps to safely perform a vaccination

    Use same techniques and skills for aesthetic therapies

    Includes B12, Vitamin C and other treatments

    Essential qualification for all injections

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Vaccination / Injection Course (GPT601)

Bournemouth

London Waterloo Academy

Flight Attendant

Stewardess

FLIGHT ATTENDANT VIRTUAL VIA ZOOM COURSE, EVENINGS

Registration Fee

Course Fee

Swansea

ONLINE STUDY + ONE DAY ZOOM SESSION
NO CLASSROOM ATTENDANCE REQUIRED


Awarding Body: Dual Accreditation - Open College Network (OCN Credit4Learning) & The CPD Certification Service (21 CPD Points)
 
Award Level: UK - Level Three (Advanced) + 21 CPD Points
Ireland Level Five (Advanced) + 21 CPD Points
 
Minimum Age: 18 (16 with parental consent)
 
Entry requirements: None. English Level 2 desirable
 
Training Locations: Study online + virtual classroom.
 
Practical Training: Includes FREE Practise@Home Phlebotomy Training Kit worth £79.99
This comprehensive 76 piece practical training kit includes mini-arm trainer, sharps container and all medical grade supplies needed as well as a step-by-step 30 minute training video.



PART 1 (THEORY) - STUDY AT HOME ONLINE :
Complete your theory training online in the comfort of your own home or at work. Stop/start when it suits you and complete the online modules at your own pace. Can be completed on multiple devices such as laptop, smart-phone, desktop computer, kindle, tablet etc.
 
PART 2 (PRACTICAL SESSIONS) - JOIN US FOR A COMPREHENSIVE ONE DAY ZOOM SESSION:
Full instructions will be provided. We will send you a completely free Practise@Home Phlebotomy Training Kit, including a mini-arm trainer, for you to keep. You will follow your tutor's on-screen instructions during your Zoom virtual classroom sessions as you learn and develop your phlebotomy skills. The procedures and practices taught online are exactly the same as you would learn in the classroom. At any time before or after your course you can watch our 30 minute step-by-step video to refresh your knowledge and continue to use your training kit to practice your skills.
 
(THIS COURSE AWARDS THE SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR CLASSROOM AND HYBRID COURSE VERSIONS)


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


COURSE ITINERARY

 
A dually-accredited hybrid modular venepuncture course awarding an
OCN Accredited Level Three Certificate (3 credits) & 21 CPD Points


Nationally Recognised Qualification


Part 1 - online (eLearning) Part 2 - Virtual Classroom (1 Day Zoom)


PRE-COURSE
Home study pack - download and complete before the virtual classroom sessions

PART 1 - ONLINE
M01: Course Overview
M02: History, Definitions and Roles
M03: Work-flow cycles
M04: Professionalism
M05: Health & Safety
M06: Blood Collection Systems
M07: Anatomy & Physiology
M08: Blood Composition
M09: Using the equipment
M10: Performing the venepuncture - see Classroom Part 2
M11: Lab Tests and Bottle Types
M12: Analytical Errors
M13: Informal Quiz – answers
M14: Award – accredited certificates, value, application and overview. Job Opportunities.


PART 2 - VIRTUAL CLASSROOM (ONE DAY ZOOM SESSION)
M01: Introduction: Welcome, Introductions and Overview.
M10: Performing the venepuncture (theory overview)
P01: Practical Session 1 – Equipment familiarisation - "Tools of the Trade"
P02A: Practical Session 2A – Unpacking your training kit
P02B: Practical Session 2B - A look at the mini-arm trainer and associated equipment
P03: Practical Session 3 – Using the tourniquet and identifying a vein
P04: Practical Session 4 – Handling and assembling the equipment. Familiarisation and procedures including initial skill-set development
P05: Practical Session 5 - Further skill-set development and consolidation. Discussing needle types including winged infusion sets (butterfly needles)
P06A: Practical Session 6A – Performing the venepuncture on the mini-arm trainer. Palpating the vein, performing the venepuncture. Sample handling and labelling.
P06B: Practical Session 6B – Consolidating pre- and post-venepuncture procedures.
 
Additional support material can be downloaded as you progress through the course online.





ZOOM SESSION

VIRTUAL CLASSROOM (ZOOM) SESSIONS 
Our Virtual Classroom training course consists of online study (Part 1 - theory) and Virtual Classroom Zoom sessions (Part 2 - practical skill-set development)
You must complete your Part 1 online study before joining us for your Zoom session(s).
Once you have enrolled on this course you will be sent a free Practise@Home Training Kit, This is yours to keep and can be reused any many time as you wish after you have completed the course.
Your Booking Confirmation will include your Zoom log-in details.



Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

Learn how to take blood ... train as a Phlebotomist

    Nationally Recognised Qualification

    No previous experience or qualifications needed

    OCN Accredited - Level 3 (advanced)

    CPD Accredited (The CPD Certification Service)

    Covers all steps up to live blood draw

    Practise on artificial arm and fake blood!

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Introduction to Phlebotomy Course (GPT003VC) - 1 DAY Virtual Classroom

Southend on Sea

Droitwich Spa

Portsmouth

Rotherham

Leeds

Slough

Newport

Peterborough

Paisley

Luton

Hull

Northampton

Liverpool 

BASIC to ADVANCED COURSE PACKAGE

Complete 3 courses over 2 full days and receive three qualifications:

Introduction to Phlebotomy Certificate (Nationally Recognised Level 3, Ireland Level 5)
Days 1 and 2: 9.30am – 5.00pm

Advanced Phlebotomy Certificate (Nationally Recognised Level 4, Ireland Level 6)
Day 1: 5.30pm - 8.30pm

Geopace Certificate of Competency (Nationally Recognised Accredited, CPD Practical Skills)
Day 2: 5.30pm - 8.30pm

Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.






Key Facts & Summary:


COURSE 1: INTRODUCTION TO PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Three (Ireland Level Five)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (21 CPD Points)

PART 1 (DAY 1) - 9.30am to 5.00pm
PART 2 (DAY 2) - 9.30am to 5.00pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

A TWO DAY venepuncture course at Level 3. Trains up to the point of live blood draws.

On completion awards a Nationally Recognised and Accredited Certificate in Phlebotomy.

DAY ONE (PART 1) - THEORY
Attend the course location of your choice – starts at 9.30am and finishes approx. 5.00pm

DAY TWO (PART 2) - CLASSROOM
Your classroom tutor will recap on the theory element (above) after which you will begin your practical sessions learning and developing the skills required up to the point of Live Blood Draws.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 2: ADVANCED PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Four (Ireland Level 6)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (14 CPD Points)

PART 1 - THEORY
Complete your theory training online in the comfort of your own home or at work.

PART 2 - CLASSROOM
Follow on from your Day One Theory training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.

On completion awards a Nationally Recognised and Accredited Certificate in Advanced Phlebotomy.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 3: ROUTE TO COMPETENCY MASTERCLASS
CPD ACCREDITED - The CPD Certification Service

CLASSROOM
Follow on from your Day Two practical training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

GEOPACE LIVE BLOOD SESSIONS enabling you to draw human blood under 1-to-1 supervision of your tutor. You will follow a Competency Checklist, signed off by your tutor on completion.

On completion awards a Geopace Certificate of Competency - Nationally Recognised and Accredited Route to Competency - Live Blood Draws Certificate

DOWNLOAD A COURSE ITINERARY HERE




How do I attend?

EITHER -
CLASSROOM OPTION - Attend one of our scheduled classroom locations, completing your Introduction to Phlebotomy Course over 2 days. You will also complete your Advanced Training at the end of the first day and your Competency Training at the end of the second day.

Our Introduction to Phlebotomy and Advanced Phlebotomy Training Kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available to add at time of booking. Our comprehensive training kits each mirror the same equipment and supplies used in the classroom and both include detailed video tutorials, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for a one day Zoom session to complete your Introduction to Phlebotomy virtual classroom training, followed by your Advanced Training in the evening of the same day. You have the option to add a classroom-based competency session, awarding a CPD Accredited Geopace Certificate of Competency, at time of booking.

Our Virtual Classroom option includes two very comprehensive training kits - one for your introductory course and one for your advanced course. Kits are included at no charge (normally £79.95 each) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Please note - Competency Training
Our Route to Competency Masterclass - Live Blood Sessions can only be completed in a classroom environment. This is included when you book a classroom option. When booking the virtual classroom option you can choose to add this at time of booking. You will receive a voucher code to enable you to book onto any upcoming dates or locations. For most of our two day course we run our competency training at the end of the second day and therefore you should be able to complete your full training programme with us over two days.

If you are completing your training by virtual classroom please see our list of competency training locations here.

If you would like to "mix and match" your training dates and/or locations then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are accredited and are Skills for Health & WHO compliant.

THIS COURSE PACKAGE INCLUDES:
1: INTRODUCTION TO PHLEBOTOMY COURSE (GPT003) - Level 3 (Ireland Level 5)
2: ADVANCED PHLEBOTOMY COURSE (GPT005) - Level 4 (Ireland Level 6)
3: GEOPACE COMPETENCY CERTIFICATE - CPD Certified (optional with Virtual Classroom)

Learn how to take blood ... train as a Phlebotomist

FAST-TRACK YOUR PHLEBOTOMY TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% off -  Multi-Course Discount

    Cover all stages from beginner through to Level 4

    Available as Classroom or Virtual Classroom

    Complete your beginner to advanced training in 2 days

    Awards 2 accredited qualifications - Introduction to Phlebotomy and Advanced Phlebotomy qualifications

    Both courses are dually accredited (OCN & CPD)

    Geopace Certificate of Competency included with classroom attendance or available as an option when booking virtual classroom

    Covers all steps up to live blood draw

    Learn advanced skills and techniques

    Virtual Classroom options include comprehensive Practise@Home Training Kits (yours to keep)

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Phlebotomy Training - Beginner to Advanced PACKAGE

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span data-slate-fragment="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" id="isPasted" fr-original-style="" style="box-sizing: border-box;">One hour webinar to help prepare rally competitors for the transition to writing your own pace notes. Covering equipment needed, how to prepare, how to practice and a quick overview of Easywrite Steering Wheel Cover. What makes good pace notes - find out, it could be the most cost effective performance advantage available. All attendees will receive a 10% off Easywrite products from Rally Navigation Training Services.</span>

</p>

One hour webinar to help prepare rally competitors for the transition to writing your own pace notes. Covering equipment needed, how to prepare, how to practice and a quick overview of Easywrite Steering Wheel Cover. What makes good pace notes - find out, it could be the most cost effective performance advantage available. All attendees will receive a 10% off Easywrite products from Rally Navigation Training Services. 

Rally Navigation Training Services

Sports & Fitness

Rally training webinar covering making pace notes for special stage rallying.

Rally Pacenote Writing for Beginners

Brighton

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (Foundation Degree Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M00 - Introduction:
Learning outcomes, Assumptions and Overview.
M01 - Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to
the advanced course.
M02 - Aspirated and Vacuated Systems:
Open systems (Syringe & Needle), closed systems (Vacutainer & Monovette), Alternative closed systems, Using Monovette - aspiration and evacuated techniques, monovette adapter systems.
M03 - Specialised and Advanced Phlebotomy Equipment:
The centrifuge - overview. Safe operation and use. Managing a centrifuge breakage or spillage.
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at
0 degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
M04 - Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC tests. Roles for phlebotomists performing POC Tests.
M05 - Neonates and Children:
Sample collection from new-born to pre-adult. A detailed overview of legal principles of law including child consent and child protection for phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedures including
microtainers, lancets and capillary tube collection. Detailed heel prick procedure. Paediatric finger prick collection. The life-threatening hazard of over-collecting. Communication techniques in differing age bands.
Consent and the law. Basic principles of lawful consent for neonates and paediatric patients. Child protection.
Detailed analysis of neonatal and paediatric blood collection including Guthrie card collection. Neonatal bottles - colours and tests. Paediatric blood gases collection.
Butterfly needles - when to use. Blood tests during pregnancy. Neonatal blood screening - nine conditions covered. Bilirubin in neonates.
M06 - Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin changes and venepuncture implications. A profile of common
geriatric blood tests. Age related problems. Procedural precautions.
M07 - Special Procedures:
Drawing blood from back of hand. Drawing blood from lower limb veins. Managing the unwilling or difficult patient. Managing the psychiatric patient. Managing the isolated patient. Non-routine blood tests. Managing the latex allergy patient (type 1 and type 4 reactions). Latex indicators. Sample handling - non-routine procedures. Drug trials and research projects.
M08 - Special Tests and Sample Handling Procedures:
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group - collection notes, analytic time, optimal collection time and notes for each group.
M09 - Advanced Phlebotomy Tasks:
Additional procedures. Maintaining POC equipment. Stock control and stock rotation. Quality control. Data entry. Product evaluation. Training and competency evaluation.
M10 - Alternative Environments:
A step-by-step look at non-clinical phlebotomy environments including private testing, DEFRA, forensic and police, cord blood collection, DNA analysis, veterinary services, overseas and volunteering.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM)
MORNING , AFTERNOON OR EVENING SESSION:

1 - Welcome, introductions and overview:
- Classroom - health & safety briefing, schedule overview.
- Virtual Classroom - audio/visual checks and registration. Unpacking and overview of your training kit.
2 - Syringe and Needle (open system): Correct use and applications.
3 - Monovette (open and closed systems):
Using the Monovette system in aspiration mode - correct use and applications.
Using the Monovette system in evacuated mode - correct use and applications.
4 - IR Vein Detector:
Demonstration of the IR vein detector for assisting in detection of difficult veins.
5 - Veins in back of hand:
Detecting suitable veins in the back of the hand.
6 - POC testing:
Point of Care Testing - use of glucose meter to demonstrate a typical POC test procedure. Correct use and overview of other POC test devices.
7 - Using lancets (finger collection)
We look at the correct use of lancets for POC testing and whole blood micro-collection.
8 - Using lancets (heel collection)
We look at the correct use of lancets for neonatal blood spot tests (Guthrie Test).
9 - Capillary collection
Using glass capillary tubes for micro-collection. Correct use and handling.
10 - Microtube collection
Correct use of BD Microtainers (and similar micro-collection bottles) - collection and handling.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6)

    FDSc (Foundation Degree Level) qualification

    Nationally Recognised certificate

    Dually accredited: Open College Network  and CPD

    Covers both aspirated and evacuated systems

    Covers specialised blood collection systems & methods

    Classroom or Virtual Classroom learning options

    Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep)

    Complete your training from beginner to advanced level

    This course either follows on from our Introduction to Phlebotomy Course  or can be combined with our introductory course as part of a course package (see below)

    Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.


Advanced Phlebotomy - Skills & Techniques (GPT005)

ILM Level 3 Award in Leadership and Management

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><b style="color: rgb(26, 26, 26); box-sizing: border-box;" fr-original-style="color: rgb(26, 26, 26);">This driver CPC course - Customer Service &amp; Manual Handling</b><b style="color: rgb(26, 26, 26); box-sizing: border-box;" fr-original-style="color: rgb(26, 26, 26);"> is suitable for LGV &amp; PCV and will cover:</b></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Company &amp; Driver Image,&nbsp;Who Customers Are and What They Want,&nbsp;Communication Skills,&nbsp;Giving Good Customer Service,&nbsp;About Manual Handling,&nbsp;The Spine,&nbsp;Manual Handling Injuries and Their Costs,&nbsp;Regulations,&nbsp;Manual Handling Risk Assessment,&nbsp;Safe Handling Techniques,&nbsp;Manual Handling Equipment.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">All courses start at 07:45 hrs and finish at 15:45 hrs</strong></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.</strong></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Approval:</strong> This course is registered with JAUPT as approved for Driver CPC qualification.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Course Approval Number: CRS18242/475.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">On completion of the course all attendees will receive certificate of attendance.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.</p>

This driver CPC course - Rules of the Road & Manual Handling is suitable for LGV & PCV and will cover:
Requirements, Speed Limits, SMART Motorways, Highway Code, Road Signs, Bridge Strikes, Mobile Phones, Sat-Navs, Traffic Accident Procedure, About Manual Handling, The Spine, Manual Handling Injuries and Their Costs, Regulations, Manual Handling Risk Assessment, Safe Handling Techniques, Manual Handling Equipment.
All courses start at 07:45 hrs and finish at 15:45 hrs
All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.
Approval: This course is registered with JAUPT as approved for Driver CPC qualification.
Course Approval Number: CRS18242/475.
On completion of the course all attendees will receive certificate of attendance.
Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

PETM

HGV Driver

7.5 Ton Driver

Manual Handling

Driver CPC

Rules of the Road & Manual Handling - Online

<div id="course-pills-1">Duration<p>2 Days</p><p>12 CPD hours</p>This course is intended for<p>The audience for this course is anyone who wants to acquire foundation level knowledge on data centre infrastructure. This course is ideally suited for data centre new hires, internal data centre support staff, IT support staff who work in the data centre, helpdesk staff, vendors/suppliers who install/maintain data centre equipment, building maintenance staff including data centre cleaners and other supporting functions, and fresh graduates. This course is also well suited for individuals working in data centre business support functions such as sales/pre-sales, HR, Finance and business administration.</p>Overview<p>The DCFC course will prepare participants for entry into the exciting and high-growth data centre industry. It will ensure that participants acquire the required basic knowledge to take on a wide variety of jobs in the data centre industry. It will also provide the required knowledge and skill to further their training into specialised areas on data centre design/build, operations/governance or standards/compliance.</p><p>The Data Centre Foundation Certificate (DCFCÂ©) is a 2-day course designed to deliver foundation knowledge about data centre facilities infrastructure. It provides participants with global overview and knowledge on data centres which will be of advantage to the participants who are looking at joining the ranks of professionals working in the data centre, ICT, infrastructure or the mechanical and electrical (M&amp;E) design industries. It will also form a solid foundation for participants who wish to pursue his/her studies either academically or to further his/her industry specialisation with professional certification courses on data centre design/build, operations/governance and/or standards/compliance. With the tremendous growth of data and the data centres to support it, the demand for data centre professionals will grow in tandem.</p></div><div id="course-pills-2"><h4>Introduction to Data Centres</h4><ul><li>History of data centres</li><li>Definition of different type data centres</li></ul><h4>Data Centre Standards</h4><ul><li>List of standards</li><li>Rating definitions</li></ul><h4>Data Centre Facilities Areas</h4><ul><li>Listing of all areas and their functions</li></ul><h4>Topology Designs</h4><ul><li>Definition of Ratings</li></ul><h4>Components of the Power Infrastructure</h4><ul><li>Utility power</li><li>Transformers</li><li>Generators</li><li>Fuel systems</li><li>ATS</li><li>UPS systems</li><li>Batteries</li><li>Electric panels</li><li>Cabling/busbar systems</li><li>Power rails/strips</li></ul><h4>Lights</h4><ul><li>Lights</li><li>Emergency lights</li></ul><h4>Cooling Infrastructure</h4><ul><li>Chillers</li><li>DX Systems</li><li>Evaporators</li><li>CRAC/CRAU/HVAC</li><li>Raised floor</li><li>Non-raised floor</li><li>Containment</li></ul><h4>ICT/Network Infrastructure</h4><ul><li>Equipment racks</li><li>Network cabling (fibre, copper)</li><li>Cable trays and pathways</li><li>TIA-606 labelling</li></ul><h4>Data Centre Security</h4><ul><li>Perimeter security</li><li>Physical protection</li><li>CCTV</li><li>Access control</li><li>Security management</li></ul><h4>Fire Suppression</h4><ul><li>Detection systems</li><li>Suppression systems</li><li>Prevention systems</li><li>Fire extinguishers</li><li>Fire Safety</li></ul><h4>Monitoring and reporting</h4><ul><li>DCIM</li><li>EMS/BMS</li></ul></div>

Nexus Human

Design & Technology Courses (DT)

Service Design Courses (SDC)

IT Certifications

Cyber Security Foundation

Certified in Data Protection (CDP)

ICDL (International Certification of Digital Literacy)

Data Centre Foundation Certificate (DCFC)

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Sixty minute webinar on Rally Regularity Timing covering equipment required, how to keep to time, working out penalties and speed changes, this webinar focuses on styles of regularity that require the use of standard average speed tables. The competitive component of on the public highway historic road rallying, focusing on regularity using average speed tables. Ideal for competitors on events such as HRCR Clubmans Championship or Rally of the Tests</p>

Sixty minute webinar on Rally Regularity Timing covering equipment required, how to keep to time, working out penalties and speed changes, this webinar focuses on styles of regularity that require the use of standard average speed tables. The competitive component of on the public highway historic road rallying, focusing on regularity using average speed tables. Ideal for competitors on events such as HRCR Clubmans Championship or Rally of the Tests

Historic Road Rallying training webinar on Regularity focusing on Average Speed Table style regularities.

238 Courses in Nottingham

Gas Turbines, Co-Generation and Combined Cycle Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Introduction to Power Systems

By EnergyEdge - Training for a Sustainable Energy Future

Petroleum Engineering for Non-Petroleum Engineering Technical Professionals

By EnergyEdge - Training for a Sustainable Energy Future

First Line Management Course

By Dickson Training Ltd

Heat Rate Optimization of Coal Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

GPON and FTTx networks

By Systems & Network Training

Steam Turbine Technology

By EnergyEdge - Training for a Sustainable Energy Future

Slinger Banksman (On-Site)

By You Can Do It .Training

Subsea Production Engineering - Incorporating Subsea Tie-backs - Virtual Instructor Led Training

By EnergyEdge - Training for a Sustainable Energy Future

Advanced Process Safety Engineering

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location