Name: Design Of Circulating Fluidized Bed Boilers
Price: 3009 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of circulating fluidized bed (CFB) boiler coal power plants. The Commissioning Management System of CFB boiler coal power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report.</p>
<p>The course provides also a thorough understanding of all the commissioning requirements for CFB boiler and auxiliaries, turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear, and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a coal power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of CFB boiler coal power plant systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports.</p>
<p>This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any CFB boiler coal power plant equipment because it provides detailed pre-commissioning checks and detailed tests and commissioning procedures and instructions for every component in a CFB boiler coal power plant.</p>
<p>In addition, the course provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each CFB boiler coal power plant equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in CFB Boiler Coal Power Plants:</span></strong><span> Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in CFB boiler coal power plants</span></li>
<li><strong><span>Commissioning Management System of CFB Boiler Coal Power Plants:</span></strong><span> Discover the benefits of the Commissioning Management System of CFB boiler coal power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report</span></li>
<li><strong><span>Commissioning Procedures and Instructions for CFB Boiler and Auxiliaries in Coal Power Plants:</span></strong><span> Learn about the commissioning procedures and instructions for CFB boiler and auxiliaries including all commissioning activities, typical commissioning schedule, hydraulic test and wet preservation, air and gas tightness test, trial run of equipment, electronic precipitators, fuel oil system, preparation for first light up, alkali boil - out, acid cleaning and passivation, thermal flow test of economizer, water walls, and superheater, valves, steam boiling, and safety valve setting</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Turbine and Auxiliaries:</span></strong><span> Gain a thorough understanding of all the commissioning procedures and instructions for turbine and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Generator and Auxiliaries:</span></strong><span> Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Electrical Equipment: </span></strong><span>Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers, and motors</span></li>
<li><strong><span>CFB Boiler Coal Power Plant Equipment and Systems:</span></strong><span> Learn about various CFB boiler coal power plant equipment and systems including: CFB boilers, superheaters, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>CFB BOILER COAL POWER PLANT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component and system in CFB boiler coal power plants - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Commissioning and Start-Up Activities of Coal Power Plants

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>This 5 full-day course provides a comprehensive understanding of the inspection, diagnostic testing, troubleshooting, maintenance, overhaul and refurbishment of all steam and gas turbines. This course will focus on maximizing the efficiency, reliability, and longevity of this equipment by providing an understanding of the common problems and repair techniques, preventive and predictive maintenance of all steam and gas turbines.</p>
<p>This course is a MUST for anyone who is involved in diagnostic testing, troubleshooting, or maintenance of steam and gas turbines because it covers the various maintenance strategies, troubleshooting techniques, and the latest testing and refurbishment methods of all steam and gas turbines. The course provides also guidelines and rules that ensure successful refurbishment of all types of steam and gas turbines. In addition, this course will cover in detail advanced fault detection techniques, critical components and all preventive and predictive maintenance methods of steam and gas turbines in order to increase their reliability and reduce their operation and maintenance cost.</p>
<p>This course will provide the following information for all types of steam and gas turbines:</p>
<ul>
<li>Diagnostic Testing Techniques</li>
<li>Troubleshooting Methods</li>
<li>Latest Maintenance Strategies</li>
<li>Modern Refurbishment Methods</li>
<li>Enclosures and Sealing Arrangements</li>
<li>Codes and Standards</li>
<li>Common Operational Problems</li>
<li>All Predictive and Preventive Maintenance Methods</li>
<li>Performance Surveillance Methods</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Equipment Maintenance:</span></strong><span> Gain a thorough understanding of the latest maintenance strategies of steam and gas turbines</span></li>
<li><strong><span>Equipment Diagnostics and Inspection:</span></strong><span> Learn in detail all the diagnostic techniques and inspections required for critical components of steam and gas turbines</span></li>
<li><strong><span>Equipment Testing: </span></strong><span>Understand thoroughly all the tests required for the various types of steam and gas turbines</span></li>
<li><strong><span>Equipment Troubleshooting:</span></strong><span> Determine all the troubleshooting activities required to minimize the downtime and operating cost of steam and gas turbines</span></li>
<li><strong><span>Equipment Repair and Refurbishment:</span></strong><span> Gain a detailed understanding of the various methods used to repair and refurbish steam and gas turbines</span></li>
<li><strong><span>Efficiency, Reliability, and Longevity:</span></strong><span> Learn the various methods used to maximize the efficiency, reliability, and longevity of steam and gas turbines</span></li>
<li><strong><span>Equipment Performance Surveillance:</span></strong><span> Gain a detailed understanding of the various methods used to perform performance surveillance on steam and gas turbines</span></li>
<li><strong><span>Design Features: </span></strong><span>Understand all the design features that improve the efficiency and reliability of steam and gas turbines</span></li>
<li><span><strong>Equipment Enclosures and Sealing Methods:</strong> </span><span>Learn about the various types of enclosures and sealing arrangements used for steam and gas turbines</span></li>
<li><strong><span>Equipment Commissioning:</span></strong><span> Understand all the commissioning requirements for steam and gas turbines</span></li>
<li><strong><span>Equipment Codes and Standards:</span></strong><span> Learn all the codes and standards applicable for steam and gas turbines</span></li>
<li><strong><span>Equipment Causes and Modes of Failure:</span></strong><span> Understand the causes and modes of failure of steam and gas turbines</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt in digital format of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt in digital format of the relevant chapters from the 'POWER GENERATION</span> <span>HANDBOOK' second edition, published by McGraw-Hill in 2011 (800 pages)</span></li>
<li><span>Steam and Gas Turbines Maintenance Manual (300 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Maintenance of Steam and Gas Turbines:  Inspection, Diagnostic Testing, Troubleshooting, Maintenance, Overhaul and Refurbishment

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course provide a comprehensive understanding of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, HART protocol, control valves, actuators, and smart technology. This course will focus on maximizing the efficiency, reliability, and longevity of these systems and equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p>
<p>This course is a MUST for anyone who is involved in the selection, applications, or maintenance of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology because it covers how these systems and equipment operate, the latest maintenance techniques, and provides guidelines and rules that ensure their successful operation. In addition, this course will cover in detail the basic design, operating characteristics, specification, selection criteria, advanced fault detection techniques, critical components and all preventive and predictive maintenance methods in order to increase the reliability of these systems andequipment and reduce their operation and maintenance cost</p>
<p>This course will provide the following information for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology:</p>
<ul>
<li>Basic Design</li>
<li>Specification</li>
<li>Selection Criteria</li>
<li>Sizing Calculations</li>
<li>Enclosures and Sealing Arrangements</li>
<li>Codes and Standards</li>
<li>Common Operational Problems</li>
<li>All Diagnostics, Troubleshooting, Testing, and Maintenance</li>
</ul>
<p>Practical applications of smart instrumentation, SCADA, and Distributed Control Systems, control valves, actuators, etc in the following industries will be discussed in detail:</p>
<ul>
<li>Chemical and petrochemical</li>
<li>Power generation</li>
<li>Pulp and paper</li>
<li>Aerospace</li>
<li>Water and sewage treatment</li>
<li>Electrical power grids</li>
<li>Environmental monitoring and control systems</li>
<li>Pharmaceutical plants</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Equipment Operation: </span></strong><span>Gain a thorough understanding of the operating characteristics of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Diagnostics and Inspection:</span></strong><span> Learn in detail all the diagnostic techniques and inspections required of critical components of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Testing:</span></strong><span> Understand thoroughly all the tests required for the various types of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Maintenance and Troubleshooting: </span></strong><span>Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Repair and Refurbishment:</span></strong><span> Gain a detailed understanding of the various methods used to repair and refurbish modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Efficiency, Reliability, and Longevity: </span></strong><span>Learn the various methods used to maximize the efficiency, reliability, and longevity of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Sizing:</span></strong><span> Gain a detailed understanding of all the calculations and sizing techniques used for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Design Features:</span></strong><span> Understand all the design features that improve the efficiency and reliability of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Selection:</span></strong><span> Learn how to select modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology by using the performance characteristics and selection criteria that you will learn in this course</span></li>
<li><span><strong>Equipment Enclosures and Sealing</strong> Methods </span><span>Learn about the various types of enclosures and sealing arrangements used for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Commissioning:</span></strong><span> Understand all the commissioning requirements for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Codes and Standards:</span></strong><span> Learn all the codes and standards applicable for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Causes and Modes of Failure:</span></strong><span> Understand the causes and modes of failure of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>System Design: </span></strong><span>Learn all the requirements for designing different types of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Industrial Instrumentation and Modern Control Systems Practical Manual (400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Industrial Instrumentation and Modern Control Systems

<p id="isPasted"><strong><span><span>Course Overview:</span></span></strong></p><p><span>The "An Understanding of Oropharyngeal Suctioning" course is designed to provide healthcare professionals with comprehensive knowledge and practical skills required for safe and effective oropharyngeal suctioning. Oropharyngeal suctioning is a critical procedure used to clear secretions and maintain airway patency in patients who are unable to effectively clear their own airways. This course offers in-depth exploration of the techniques, equipment, and considerations involved in oropharyngeal suctioning.</span></p><p><span><br /></span></p><p><span><strong>Course Duration:</strong> </span></p><p><span>1/2 day (3 hours)</span></p><p><span><br /></span></p><p><span><strong>Course Content:</strong></span></p><p><span>By the end of this course, participants will be able to:</span></p><p id="isPasted"><span>1. Outline the indications and contraindications of suctioning</span></p><p><span>2. List the relevant anatomy and physiology</span></p><p><span>3. Explain the risks and benefits of suctioning</span></p><p><span>4. Describe the checks, safeguards and precautions relevant to the procedure and equipment</span></p><p><span>5. Outline monitoring of the individual</span></p><p><span>6. Explain the importance of following the individual’s health care plan and prescription</span></p><p><span>7. Practice suctioning in simulation </span></p><p><span>8. Describe the importance of hand-over, communication and record keeping</span></p><p><span></span><br /></p><p id="isPasted"><span><strong>Course Objectives:</strong></span></p><p id="isPasted"><span>1. Recognise the importance of oropharyngeal suctioning: Understand the significance of maintaining a patent airway through proper oropharyngeal suctioning techniques, which is crucial for patients who are unable to clear their secretions effectively.</span></p><p><span>2. Learn about indications and contraindications: Familiarize yourself with the situations in which oropharyngeal suctioning is necessary, as well as cases where it might be contraindicated.</span></p><p><span>3. Acquire skills in oropharyngeal suctioning: Develop hands-on skills in safely and effectively performing oropharyngeal suctioning using appropriate equipment, techniques, and infection control measures.</span></p><p><span>4. Understand patient assessment and preparation: Learn techniques for assessing patients who require oropharyngeal suctioning, identifying signs of airway obstruction, and preparing them for the procedure.</span></p><p><span>5. Address infection control measures: Understand the importance of adhering to infection prevention protocols during suctioning procedures to prevent the spread of pathogens and ensure patient safety.</span></p><p><span>6. Develop communication skills: Learn effective communication techniques to educate patients, caregivers, and family members about the oropharyngeal suctioning procedure, its purpose, and potential complications.</span></p><p><span>7. Address potential complications: Recognize possible complications related to oropharyngeal suctioning, such as trauma, hypoxia, and aspiration, and learn strategies to prevent and manage these issues.</span></p><p><span>8. Ethical considerations and patient-centered care: Explore ethical issues related to patient autonomy, informed consent, and providing care with dignity, respect, and empathy.</span></p><p><span><br /></span></p><p><span><strong>Assessment and Certification:</strong></span></p><p><span>Participants will undergo a practical skills assessment and a written examination to evaluate their understanding of the course content. Successful completion will lead to a certification of achievement in "An Understanding of Oropharyngeal Suctioning."</span></p><p id="isPasted"><span><strong><span>Note: This course overview is a general guideline and can be customised to suit specific local requirements and preferences, therefore, we recommend that you contact us to discuss your requirements prior to making a booking.</span></strong></span></p>

Guardian Angels Training

Gain comprehensive knowledge and practical skills for safe and effective oropharyngeal suctioning with our course. Learn techniques, equipment, and considerations for this critical procedure.

An Understanding of Oropharyngeal Suctioning

General Admission

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Identifying and correcting the root cause of failures in boilers and steam power plant equipment is essential to help reduce the chance of future problems. A comprehensive assessment is the most effective method of determining the root cause of a failure. For example, a tube failure in a boiler is usually a symptom of other problems. To fully understand the root cause of the failure, one must investigate all aspects of boiler operation leading to the failure in addition to evaluating the failure itself. When a boiler tube failure occurs, the root cause of the failure must be identified and eliminated.</p>
<p>This 5 full-day course starts by providing an in-depth understanding of root cause analysis methodology. This includes how to identify the problem, contain and analyze the problem, define the root cause of the problem, define and implement the actions required to eliminate the root cause, and validate that the corrective actions prevented recurrence of the problem. Many practical examples on how to apply root cause analysis for various industrial problems are discussed in detail.</p>
<p>The course then provides an in-depth explanation of all failure mechanisms that occur in steam power plants including corrosion, erosion, creep, cavitation, under-deposit attacks, stress corrosion cracking, hydrogen embrittlement, flow accelerated corrosion, etc. This course also provides a thorough explanation of all the failure mechanisms that occur in boilers and steam power plant equipment including steam turbines, condensers, feedwater heaters, etc. The symptoms of the failures, possible causes, components typically affected and solutions are also provided in this course. This includes boiler waterside, fireside and general boiler failure mechanisms as well as all the causes and prevention of all steam turbine failures, condensers, and feedwater heaters. The course also includes detailed study of many case histories of failures in boilers, steam turbines, condensers and feedwater heaters.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Electrical Equipment Testing and Maintenance: </span></strong><span>Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</span></li>
<li><strong><span>Root Cause Analysis Methodology:</span></strong><span> Understand root cause analysis methodology including: identification of the problem, defining the problem, understanding the problem, identification of the root cause of the problem, providing corrective action, and monitoring the system.</span></li>
<li><strong><span>Applying the Root Cause Analysis Method to Industrial Problems:</span></strong><span> Learn by studying many practical examples how to apply the root cause analysis method to various industrial problems.</span></li>
<li><strong><span>Damage Mechanisms in Boilers and Steam Power Plant Equipment: </span></strong><span>Gain a thorough understanding of all the damage mechanisms that occur in boilers and all steam power plant equipment including turbines, condensers and feedwater heaters. These mechanisms include corrosion, erosion, flow accelerated corrosion, stress corrosion cracking, creep, under-deposit attack, cavitation, hydrogen embrittlement, etc.</span></li>
<li><strong><span>Symptoms of Failures in Boilers and Steam Power Plant Equipment, Possible Causes, Components Typically Affected, and Solutions:</span></strong><span> Learn about all the symptoms of failures in boilers and steam power plant equipment including steam turbines, condensers, and feedwater heaters, their possible causes, components typically affected and proven solutions.</span></li>
<li><strong><span>Case Histories of Failures in Boilers, Steam Turbines, Condensers, and Feedwater Heaters:</span></strong><span> Learn by studying many case histories how failures occur in boilers, steam turbines, condensers, and feedwater heaters and the corrective actions taken to deal with them</span></li>
</ul>
<p> </p>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals (this seminar is suitable for individuals who do not have an electrical background)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2011 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>ROOT CAUSE ANALYSIS FOR BOILERS AND STEAM CYCLE FAILURES MANUAL (includes practical information and case histories - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Root Cause Analysis for Boilers and Steam Cycle Failures

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans. This course provides also a comprehensive explanation of all boiler combustion control systems including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system as well as their tuning methods. All boiler control systems are covered as well in this course including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, boiler-turbine coordinated control, etc.</p>
<p>The course provides also detailed explanation of Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code). The burner management systems (BMS) and examples of boiler permissive starting logic and protective tripping logic will be explained thoroughly. The various methods used to calculate the boiler efficiency are covered in detail in this course including the direct and indirect methods. All the factors which affect the efficiency and emissions of pulverized coal boiler and CFB boiler will be explained thoroughly.</p>
<p>The course covers also all the methods used to improve the efficiency of pulverized coal boilers and CFB boilers including improvement to their combustion efficiency and control systems performance.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Boiler Combustion Equipment and Systems:</span></strong><span> Gain an in-depth understanding of all boiler combustion equipment and systems including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans</span></li>
<li><strong><span>Boiler Combustion Control Systems:</span></strong><span> Gain a thorough understanding of all boiler combustion control systems for pulverized coal boilers, and CFB boilers including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system</span></li>
<li><strong><span>Boiler Conventional Control Systems:</span></strong><span> Gain an in-depth understanding of all boiler conventional control systems including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, and boiler-turbine coordinated control</span></li>
<li><strong><span>Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code):</span></strong><span> Learn about NFPA 85 code and ANSI/ISA-77-44-01-2007 code</span></li>
<li><strong><span>Burner Management System and Boiler Permissive Starting Logic and Protective Tripping Logic:</span></strong><span> Gain an in-depth understanding of burner management system and boiler permissive starting logic and protective tripping logic</span></li>
<li><strong><span>Boiler Efficiency Calculations:</span><span> Learn how to calculate the boiler efficiency using the direct and indirect methods</span></strong></li>
<li><strong><span>Factors Affecting the Efficiency and Emissions of Boilers: </span></strong><span>Understand all the factors which affect the boiler efficiency and emissions</span></li>
<li><strong><span>Methods Used to Improve the Efficiency of Boilers:</span></strong><span> Learn about all the methods used to improve the efficiency of pulverized coal boilers, and CFB boilers including improvement to their combustion efficiency and control systems performance</span></li>
<li><strong><span>Boiler Instrument and Piping Diagrams:</span></strong><span> Gain an in-depth understanding of all boiler instrument and piping diagrams</span></li>
<li><strong><span>CFB and Pulverized Coal Boilers Equipment and Systems:</span></strong><span> Learn about various types of equipment and systems used in CFB and pulverized coal boilers including economizers, steam drum, superheaters, air preheaters, ammonia injection systems, etc.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>COMBUSTION ENGINEERING FOR COAL FIRED POWER PLANTS MANUAL (includes practical information about combustion engineering for coal fired power plants - 550 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Combustion Engineering for Coal Fired Power Plants

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 3 full-day course will provide a comprehensive understanding of the various types of transformer maintenance including breakdown maintenance, preventive maintenance, total productive maintenance, condition-based maintenance, proactive maintenance, and reliability-centered maintenance. All the expected problems in dry and oil-filled transformers will be discussed in detail. All the diagnostics, troubleshooting and maintenance required to ensure adequate operation of transformers will be covered thoroughly. This course will focus on maximizing the efficiency, reliability, and longevity of all types of transformers by providing an understanding of all commissioning requirements, repair and refurbishment methods of transformers.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Equipment Diagnostics and Inspection:</strong> Learn in detail all the diagnostic techniques and inspections required of critical components of transformers</li>
<li><strong>Equipment Testing:</strong> Understand thoroughly all the routine tests, type tests, and special tests required for the various types of transformers</li>
<li><strong>Equipment Maintenance and Troubleshooting:</strong> Determine all the maintenance and troubleshooting activities required to minimize transformer downtime and operating cost</li>
<li><strong>Equipment Repair and Refurbishment:</strong> Gain a detailed understanding of the various methods used to repair and refurbish transformers</li>
<li><strong>Efficiency, Reliability, and Longevity:</strong> Learn the various methods used to maximize the efficiency, reliability, and longevity of transformers</li>
<li><strong>Equipment Sizing:</strong> Gain a detailed understanding of all the calculations and sizing techniques used for transformers</li>
<li><strong>Design Features:</strong> Understand all the design features that improve the efficiency and reliability of transformers</li>
<li><strong>Equipment Selection:</strong> Learn how to select all types of transformers by using the performance characteristics and selection criteria that you will learn in this course</li>
<li><strong>Equipment Commissioning:</strong> Understand all the commissioning requirements for transformers</li>
<li><strong>Equipment Codes and Standards:</strong> Learn all the codes and standards applicable for transformers</li>
<li><strong>Equipment Causes and Modes of Failure:</strong> Understand the causes and modes of failure in transformers</li>
<li><strong>System Design:</strong> Learn all the requirements for designing different types of transformer systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals (this course is suitable for individuals who do not have an electrical background)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Transformer Testing, Maintenance and Commissioning Manual (covering all the tests, maintenance activities, protective systems and all commissioning procedures for all types of transformers - 350 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Transformer Maintenance

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong><em> </em></h2>
<p>This 5 half-day course provides a detailed description of all performance testing methods for all thermal power plant equipment including boilers, turbines, condensers, pumps, fans, deaerators, and feedwater heaters. The methodology, and code requirements for the performance tests for all thermal power plant equipment will be explained in detail. The preparatory work and instrumentation required for each test will also be covered during the course.</p>
<p>The efficiency calculations for all equipment used in circulating fluidized bed (CFB) boiler and pulverized coal boiler power plants will be explained, including all processes, operational and maintenance activities, capital projects, technical options, potential initiatives and incentives to implement upgrades / repairs for increasing the power plant equipment efficiency.</p>
<p>The course will also provide a thorough explanation of CFB and pulverized coal boiler technology including hydrodynamics, combustion, emissions, design considerations, gas-solid separators, design of CFB and pulverized coal boiler components, management of solid residues, materials, stoichiometric calculations, and model for sulfur capture. The operation, maintenance, testing, and refurbishment options of all the equipment and systems used in CFB and pulverized coal power plants will be presented, including boilers, superheaters, reheaters, turbines, condensers, feedwater heaters, deaerators, pumps, compressors, fans, electric generators, instrumentation and control systems, and governing systems, etc.</p>
<p>The participants will get equipped on all factors which affect the CFB and pulverized coal boiler power plant efficiency and emissions, all methods used to calculate the heat rate of CFB and pulverized coal power plants as well as all areas in CFB and pulverized coal boiler power plants where efficiency loss can occur.</p>
<p>Updated information on the methods used to improve CFB boiler and pulverized coal boiler power plant heat rate will also be provided. It includes:</p>
<ol>
<li>Optimizing the combustion process and sootblowing</li>
<li>Controlling the steam temperature</li>
<li>Recovering moisture from boiler flue gas</li>
<li>Performing steam turbine maintenance</li>
<li>Lowering condenser back pressure</li>
<li>Pre-drying high moisture coal and reducing stack temperature</li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Thermal Plant Performance Testing:</strong> Gain a thorough understanding of all the performance testing methods for all thermal power plant equipment including boilers, turbines, condensers, pumps, fans, daerators, and feedwater heaters</li>
<li><strong>Performance Test Methodology and Code Requirements:</strong> Understand the methodology, and code requirements for performance tests of all thermal power plant equipment</li>
<li><strong>Performance Test Preparatory Work and Instrumentation:</strong> Learn about the preparatory work and instrumentation required for each equipment performance test in a thermal power plant</li>
<li><strong>Equipment Efficiency Calculations:</strong> Gain a thorough understanding of the efficiency calculations for all the equipment used in circulating fluidized bed (CFB) boilers and pulverized coal boilers power plants</li>
<li><strong>Calculating the Heat Rate of CFB and Pulverized Coal Boiler Power Plants:</strong> Learn all the methods used to calculate the heat rate of CFB and pulverized coal boiler coal power plants</li>
<li><strong>Benefits of Lowering the Heat Rate of CFB and Pulverized Coal Boiler Power Plants:</strong> Understand all the benefits of lowering the heat rate of CFB coal power plants</li>
<li><strong>Methods Used to Improve CFB and Pulverized Coal Boiler Power Plants Heat Rate:</strong> Gain a thorough understanding of all the methods used to improve the heat rate of CFB and pulverized boiler coal power plants</li>
<li><strong>Processes, Operational and Maintenance Activities in CFB and Pulverized Coal Boiler Power Plants: </strong>Discover all the processes, operational and maintenance activities used to improve the heat rate of CFB and pulverized coal power plants</li>
<li><strong>Capital Projects Used to Improve the Heat Rate of CFB and Pulverized Coal Boiler Power Plants:</strong> Learn about all the capital projects used to improve the heat rate of CFB and pulverized coal power plants</li>
<li><strong>Technical Options for Improving the Heat Rate of CFB and Pulverized Coal Boiler Power Plants:</strong> Understand all the technical options used to improve the heat rate of CFB and pulverized coal boiler power plants</li>
<li><strong>Potential Initiatives and Incentives to Implement Upgrades / Repairs for Improving the Heat Rate of CFB </strong><strong>and Pulverized Coal Bed Boiler Power Plants:</strong> Discover all the potential initiatives and incentives to implement upgrades / repairs for improving the heat rate of CFB and pulverized coal power plants</li>
<li><strong>Factors Affecting CFB and Pulverized Coal Boiler Power Plants Efficiency and Emissions:</strong> Learn about all the factors which affect CFB and pulverized coal boiler power plants efficiency and emissions</li>
<li><strong>Areas in CFB and Pulverized Coal Power Plants where Efficiency Loss Can Occur:</strong> Discover all the areas in CFB and pulverized coal power plants where efficiency loss can occur</li>
<li><strong>Optimize the Operation of CFB and Pulverized Coal Power Plant Equipment and Systems to Improve the Plant Heat Rate:</strong> Understand all the techniques and methods used to optimize the operation of CFB and pulverized coal power plant equipment and systems to improve the plant heat rate</li>
<li><strong>CFB and Pulverized Coal Power Plant Equipment and Systems:</strong> Learn about the various types of CFB and pulverized coal power plant equipment and systems including boilers, superheater, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><strong>The VILT will be delivered online in 5 sessions comprising 4 hours per day, with 2 breaks of 10 minutes per day</strong>, including time for lectures, discussion, quizzes and short classroom exercises. Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end the course. The instructor relies on a highly interactive training method to enhance the learning process. This method ensures  that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>E</span><span>ach delegate will receive a soft copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>THERMAL POWER PLANT PERFORMANCE TESTING MANUAL (includes practical information about all the performance testing methods for all thermal power plant equipment - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Thermal Power Plant Performance Testing

Kuala Lumpur

<section style="color: rgb(33, 37, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(33, 37, 41);"><h2 style="color: rgb(62, 57, 52); box-sizing: border-box;" fr-original-style=" color: rgb(62, 57, 52);">About this Training Course</h2><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This 5 full-day course will provide a comprehensive understanding of the various types of reciprocating, rotary, and centrifugal pumps and compressors including piston pumps, plunger pumps, rotary pumps, screw pumps, two- and three-lobe pumps, cam pumps, vane pumps, bellows-type metering pumps, diaphragm pumps, canned motor pumps, centrifugal pumps, as well as trunk piston compressors, sliding crosshead piston compressors, diaphragm compressors, rotary screw compressors, straight lobe compressors, sliding vane compressors, liquid ring compressors, centrifugal, and axial compressors. Bearings will also be covered thoroughly. This course will focus on maximizing the efficiency, reliability, and longevity of this equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This course is a MUST for anyone who is involved in the selection, applications, or maintenance of reciprocating, rotary, and centrifugal pumps or compressors because it covers how this equipment operates, the latest maintenance techniques, and provides guidelines and rules that ensure the successful operation of this equipment. In addition, it will cover in detail the basic design, operating characteristics, specification, selection criteria, advanced fault detection techniques, critical components and all preventive and predictive maintenance methods in order to increase reliability of the equipment and reduce the operation and maintenance cost.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This course will provide the following information for all reciprocating, rotary, and centrifugal pumps and compressors:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Basic Design</li><li fr-original-style="" style="box-sizing: border-box;">Specification</li><li fr-original-style="" style="box-sizing: border-box;">Selection Criteria</li><li fr-original-style="" style="box-sizing: border-box;">Sizing Calculations</li><li fr-original-style="" style="box-sizing: border-box;">Enclosures and Sealing Arrangements</li><li fr-original-style="" style="box-sizing: border-box;">Codes and Standards</li><li fr-original-style="" style="box-sizing: border-box;">Common Operational Problems</li><li fr-original-style="" style="box-sizing: border-box;">All Diagnostics, Troubleshooting, Testing, and Maintenance</li></ul></section><section style="color: rgb(33, 37, 41); box-sizing: border-box;" fr-original-style=" color: rgb(33, 37, 41);"><a data-toggle="collapse" href="https://petroedgeasia.net/training/compressors-pumps-selection-applications-operation-troubleshooting-and-maintenance-classroom-training-2/#collapseOne" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TRAINING OBJECTIVES</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Operation:</strong>&nbsp;Gain a thorough understanding of the operating characteristics of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Diagnostics and Inspectio</strong><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">n:</strong>&nbsp;Learn in detail all the diagnostic techniques and inspections required of critical components of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Testing:&nbsp;</strong>Understand thoroughly all the tests required for the various types of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Maintenance and Troubleshooting:</strong>&nbsp;Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Repair and Refurbishment:</strong>&nbsp;Gain a detailed understanding of the various methods used to repair and refurbish reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Efficiency, Reliability, and Longevity</strong>:&nbsp;Learn the various methods used to maximize the efficiency, reliability, and longevity of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Sizing:&nbsp;</strong>Gain a detailed understanding of all the calculations and sizing techniques used for reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Design Features:</strong>&nbsp;Understand all the design features that improve the efficiency and reliability of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Selection:&nbsp;</strong>Learn how to select reciprocating, rotary, and centrifugal pumps and compressors by using the performance characteristics and selection criteria that you will learn in this seminar</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Enclosures and Sealing Methods:</strong>&nbsp;Learn about the various types of enclosures and sealing arrangements used for reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Commissioning:</strong>&nbsp;Understand all the commissioning requirements for reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Codes and Standards:</strong>&nbsp;Learn all the codes and standards applicable for reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Equipment Causes and Modes of Failure:&nbsp;</strong>Understand the causes and modes of failure of reciprocating, rotary, and centrifugal pumps and compressors</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">System Design</strong><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">:</strong>&nbsp;Learn all the requirements for designing different types of reciprocating, rotary, and centrifugal pumping and compressing systems</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/compressors-pumps-selection-applications-operation-troubleshooting-and-maintenance-classroom-training-2/#collapseTwo" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TARGET AUDIENCE</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Engineers of all disciplines</li><li fr-original-style="" style="box-sizing: border-box;">Managers</li><li fr-original-style="" style="box-sizing: border-box;">Technicians</li><li fr-original-style="" style="box-sizing: border-box;">Maintenance personnel</li><li fr-original-style="" style="box-sizing: border-box;">Other technical individuals</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/compressors-pumps-selection-applications-operation-troubleshooting-and-maintenance-classroom-training-2/#collapsecl" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">COURSE LEVEL</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Intermediate</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/compressors-pumps-selection-applications-operation-troubleshooting-and-maintenance-classroom-training-2/#collapseThree" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TRAINING METHODS</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Each delegate will receive a copy of the following materials written by the instructor:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">&ldquo;POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE&rdquo; published by McGraw-Hill in 2012 (800 pages)</li><li fr-original-style="" style="box-sizing: border-box;">Practical Manual (200 pages)</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/compressors-pumps-selection-applications-operation-troubleshooting-and-maintenance-classroom-training-2/#collapseFive" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TRAINER</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as &ldquo;Excellent&rdquo; or &ldquo;Very Good&rdquo; by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li><li fr-original-style="" style="box-sizing: border-box;">Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li><li fr-original-style="" style="box-sizing: border-box;">Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li><li fr-original-style="" style="box-sizing: border-box;">Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li><li fr-original-style="" style="box-sizing: border-box;">Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Furthermore, he has received the following awards:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">The first &ldquo;Excellence in Teaching&rdquo; award offered by PowerEdge, Singapore, in December 2016</li><li fr-original-style="" style="box-sizing: border-box;">The first &ldquo;Excellence in Teaching&rdquo; award offered by the Professional Development Center at University of Toronto (May, 1996).</li><li fr-original-style="" style="box-sizing: border-box;">The &ldquo;Excellence in Teaching Award&rdquo; in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li><li fr-original-style="" style="box-sizing: border-box;">Awarded graduation &ldquo;With Distinction&rdquo; from Dalhousie University when completed Bachelor of Engineering degree (1983).</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Lastly, he was awarded his Bachelor of Engineering Degree &ldquo;with distinction&rdquo; from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/compressors-pumps-selection-applications-operation-troubleshooting-and-maintenance-classroom-training-2/#collapseCS" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">POST TRAINING COACHING SUPPORT (OPTIONAL)</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &ldquo;One to One&rdquo; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;"><a href="mailto:info@asiaedge.net?subject=Request%20for%20further%20information%20regarding%20post%20training%20coaching%20support" target="_blank" style="color: rgb(0, 123, 255); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 123, 255);">Request for further information post training support</a>&nbsp;and fees applicable</p></div></section>

Maintenance

Enhance your expertise in compressor and pump selection, operation, troubleshooting, and maintenance with EnergyEdge's comprehensive classroom training. Elevate your skills today!

Compressors & Pumps: Selection, Applications, Operation, Troubleshooting and Maintenance

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will provide a comprehensive understanding of the design of circulating fluidized bed (CFB) boilers. The design of all CFB boiler components and equipment including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves will be covered in detail. All potential operating problems and major operating problems, corrective actions and maintenance required for CFB boilers will be covered thoroughly.</p>
<p>This course will focus on designing CFB boilers that have the highest efficiency, and maximum longevity and capacity factor. All the common problems encountered in CFB Boilers will be discussed in detail.This includes thermally induced failures, anchor system induced failures, water walls tube failures, NMEJ damages, clinker formation, refractory damages, APH tube chock-up, erosion and corrosion. The solutions to each of these problems will be presented. All repair and refurbishment methods, preventive and predictive maintenance required for CFB boilers will be covered in-depth.</p>
<p>Several studies have confirmed that CFB boilers are the best method for power generation.This is due to their fuel flexibility, and lowest electricity cost among all types of boilers. This technology is in great demand due to various other advantages such as lower emissions as compared to other types of boilers and has a carbon footprint well below the norms laid down by the World Bank emission requirements.</p>
<p>This course is a MUST for anyone who is involved in the design, operation or maintenance of circulating fluidized bed boilers, because it covers how these boilers are designed and provides guidelines and rules that ensure the CFB boilers have great performance. This course will also provide up-dated information in respect to the design of supercritical once-through CFB boilers and ultra supercritical CFB boilers.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><span><strong>Circulating Fluidized Bed Boiler Design:</strong> </span><span>Gain a thorough understanding of the best design methods of circulating fluidized bed boilers.</span></li>
<li><span><strong>Design of Circulating Fluidized Bed Boiler:</strong> Components and Systems</span><span>: Learn</span> <span>all the techniques used to design CFB boiler equipment and systems including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves.</span></li>
<li><strong><span>Design of Circulating Fluidized Bed Boiler to Achieve Highest Efficiency, and Best Performance and Economics</span></strong><span><strong>:</strong> Gain a thorough understanding of all the methods used to design CFB boilers having the highest efficiency, longevity and capacity factor as well as best economics.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Equipment:</span></strong><span> Learn about various equipment of circulating fluidized bed boilers including: furnaces, cyclones, economizers, superheaters, reheaters, ammonia injection systems, electrostatic precipitators, polishing dry scrubbers, fuel and sorbent feeding systems, bottom ash handling and extraction systems and materials.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Environmental Emissions:</span></strong><span> Learn about the monitoring and control of environmental emissions from circulating fluidized boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation and control systems of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Reliability and Testing:</span></strong><span> Increase your knowledge of predictive and preventive maintenance, reliability and testing of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Selection and Applications: </span></strong><span>Gain a detailed understanding of the selection considerations and applications of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Maintenance:</span></strong><span> Learn all the maintenance activities required for circulating fluidized bed boilers, to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Refurbishment, and Life Extension Methods: </span></strong><span>Learn about life cycle cost, profitability, refurbishment, and life extension methods for all types of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Commissioning: </span></strong><span>Understand all the commissioning requirements of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Codes and Standards: </span></strong><span>Learn all the codes and standards applicable for circulating fluidized bed boilers.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Design of Circulating Fluidized Bed Boiler manual (600 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Design Of Circulating Fluidized Bed Boilers

Brighton

Southend on Sea

Droitwich Spa

Portsmouth

Rotherham

Manchester

Leeds

Slough

Bingley

Newport

Peterborough

Milton Keynes 

Nottingham

Paisley

Birmingham

Luton

Hull

Northampton

Bedford

Liverpool 

Swansea

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (Foundation Degree Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M00 - Introduction:
Learning outcomes, Assumptions and Overview.
M01 - Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to
the advanced course.
M02 - Aspirated and Vacuated Systems:
Open systems (Syringe & Needle), closed systems (Vacutainer & Monovette), Alternative closed systems, Using Monovette - aspiration and evacuated techniques, monovette adapter systems.
M03 - Specialised and Advanced Phlebotomy Equipment:
The centrifuge - overview. Safe operation and use. Managing a centrifuge breakage or spillage.
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at
0 degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
M04 - Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC tests. Roles for phlebotomists performing POC Tests.
M05 - Neonates and Children:
Sample collection from new-born to pre-adult. A detailed overview of legal principles of law including child consent and child protection for phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedures including
microtainers, lancets and capillary tube collection. Detailed heel prick procedure. Paediatric finger prick collection. The life-threatening hazard of over-collecting. Communication techniques in differing age bands.
Consent and the law. Basic principles of lawful consent for neonates and paediatric patients. Child protection.
Detailed analysis of neonatal and paediatric blood collection including Guthrie card collection. Neonatal bottles - colours and tests. Paediatric blood gases collection.
Butterfly needles - when to use. Blood tests during pregnancy. Neonatal blood screening - nine conditions covered. Bilirubin in neonates.
M06 - Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin changes and venepuncture implications. A profile of common
geriatric blood tests. Age related problems. Procedural precautions.
M07 - Special Procedures:
Drawing blood from back of hand. Drawing blood from lower limb veins. Managing the unwilling or difficult patient. Managing the psychiatric patient. Managing the isolated patient. Non-routine blood tests. Managing the latex allergy patient (type 1 and type 4 reactions). Latex indicators. Sample handling - non-routine procedures. Drug trials and research projects.
M08 - Special Tests and Sample Handling Procedures:
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group - collection notes, analytic time, optimal collection time and notes for each group.
M09 - Advanced Phlebotomy Tasks:
Additional procedures. Maintaining POC equipment. Stock control and stock rotation. Quality control. Data entry. Product evaluation. Training and competency evaluation.
M10 - Alternative Environments:
A step-by-step look at non-clinical phlebotomy environments including private testing, DEFRA, forensic and police, cord blood collection, DNA analysis, veterinary services, overseas and volunteering.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM)
MORNING , AFTERNOON OR EVENING SESSION:

1 - Welcome, introductions and overview:
- Classroom - health & safety briefing, schedule overview.
- Virtual Classroom - audio/visual checks and registration. Unpacking and overview of your training kit.
2 - Syringe and Needle (open system): Correct use and applications.
3 - Monovette (open and closed systems):
Using the Monovette system in aspiration mode - correct use and applications.
Using the Monovette system in evacuated mode - correct use and applications.
4 - IR Vein Detector:
Demonstration of the IR vein detector for assisting in detection of difficult veins.
5 - Veins in back of hand:
Detecting suitable veins in the back of the hand.
6 - POC testing:
Point of Care Testing - use of glucose meter to demonstrate a typical POC test procedure. Correct use and overview of other POC test devices.
7 - Using lancets (finger collection)
We look at the correct use of lancets for POC testing and whole blood micro-collection.
8 - Using lancets (heel collection)
We look at the correct use of lancets for neonatal blood spot tests (Guthrie Test).
9 - Capillary collection
Using glass capillary tubes for micro-collection. Correct use and handling.
10 - Microtube collection
Correct use of BD Microtainers (and similar micro-collection bottles) - collection and handling.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6)

    FDSc (Foundation Degree Level) qualification

    Nationally Recognised certificate

    Dually accredited: Open College Network  and CPD

    Covers both aspirated and evacuated systems

    Covers specialised blood collection systems & methods

    Classroom or Virtual Classroom learning options

    Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep)

    Complete your training from beginner to advanced level

    This course either follows on from our Introduction to Phlebotomy Course  or can be combined with our introductory course as part of a course package (see below)

    Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.


Advanced Phlebotomy - Skills & Techniques (GPT005)

Cardiff

<div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><h2 fr-original-style="" style="box-sizing: border-box;">INTRAMUSCULAR, INTRADERMAL &amp; SUBCUTANEOUS INJECTION COURSE (GPT601)<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">CLASSROOM or VIRTUAL CLASSROOM (with online theory)</span></h2></div><section fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-testid="columns" fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-mesh-id="comp-kl8214n52inlineContent" data-testid="inline-content" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214n52inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">Learn how to administer vaccines or injections ...&nbsp;</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Nationally Recognised Qualification</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes IM, ID and Sub-Cut Injection methods</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OCN Accredited - Level 4 (Foundation Degree - FDSc)</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Covers all steps to safely perform a vaccination</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Use same techniques and skills for aesthetic therapies</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes B12, Vitamin C and other treatments</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Essential qualification for all injections</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Basic understanding of English language required</p></li><li fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OPEN TO ALL APPLICANTS</p></li></ul><div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">About this course</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">Learning Outcomes</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" fr-original-style="color:#0D73B7;">After the course</span></p></div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">PART 1 - Theory: complete online at<br fr-original-style="" style="box-sizing: border-box;">home or work and download a certificate of completion</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Injections - Aesthetics - B12, Vit C etc.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">78 UK &amp; Eire training locations</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">OCN Accredited at Level 4 (FDSc)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Medical training standards throughout</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Skills for Health &amp; WHO compliant</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" id="isPasted" fr-original-style="color:#0D73B7;">Learning Outcomes</span></p><div data-mesh-id="comp-kl8214o43inlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214o43inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Train up to point of first vaccination or injection&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">All theory and practical skills required to perform a safe procedure</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Covers all essential theory and skill-set development to meet medical standards</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understand the procedures used to set up &nbsp;a manage and administer a vaccine</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Post-injection management and how to avoid critical complications</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Correct client care and aftercare</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Includes legal, consent and documentation</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(13, 115, 183); box-sizing: border-box;" id="isPasted" fr-original-style="color:#0D73B7;">After the course</span></p><div data-mesh-id="comp-kl8214oainlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214oainlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Safely and competently administer a vaccine or drug treatment (ie. B12)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Correct client management before, during injection and safe after-care</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understanding equipment types and appropriate choices</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understand vaccine management control</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Appreciate legal and professional responsibilities</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Offer injection therapies to clients - vitamin supplements</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Administer in hospitals, GP Surgeries and Outreach Centres</p></div></div></div></div></div></div></div></div></div></div></div></section>

INTRAMUSCULAR, INTRADERMAL & SUBCUTANEOUS INJECTION COURSE (GPT601)
CLASSROOM or VIRTUAL CLASSROOM (with online theory)
Learn how to administer vaccines or injections ... 
Nationally Recognised Qualification
Includes IM, ID and Sub-Cut Injection methods
OCN Accredited - Level 4 (Foundation Degree - FDSc)
Covers all steps to safely perform a vaccination
Use same techniques and skills for aesthetic therapies
Includes B12, Vitamin C and other treatments
Essential qualification for all injections
Basic understanding of English language required
OPEN TO ALL APPLICANTS
About this course
Learning Outcomes
After the course
PART 1 - Theory: complete online at
home or work and download a certificate of completion
PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom
Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines
Injections - Aesthetics - B12, Vit C etc.
78 UK & Eire training locations
OCN Accredited at Level 4 (FDSc)
Medical training standards throughout
Skills for Health & WHO compliant
Learning Outcomes
Train up to point of first vaccination or injection 
All theory and practical skills required to perform a safe procedure
Covers all essential theory and skill-set development to meet medical standards
Understand the procedures used to set up a manage and administer a vaccine
Post-injection management and how to avoid critical complications
Correct client care and aftercare
Includes legal, consent and documentation
After the course
Safely and competently administer a vaccine or drug treatment (ie. B12)
Correct client management before, during injection and safe after-care
Understanding equipment types and appropriate choices
Understand vaccine management control
Appreciate legal and professional responsibilities
Offer injection therapies to clients - vitamin supplements
Administer in hospitals, GP Surgeries and Outreach Centres

Immunisation & Vaccination

Immunisation

Injection

Vaccination

Vaccinator

Medicine & Nursing

Learn how to administer vaccines or injections ...

    Nationally Recognised Qualification

    Includes IM, ID and Sub-Cut Injection methods

    OCN Accredited - Level 4 (Foundation Degree - FDSc)

    Covers all steps to safely perform a vaccination

    Use same techniques and skills for aesthetic therapies

    Includes B12, Vitamin C and other treatments

    Essential qualification for all injections

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Vaccination / Injection Course (GPT601)

Bournemouth

London Waterloo Academy

Flight Attendant

Stewardess

FLIGHT ATTENDANT VIRTUAL VIA ZOOM COURSE, EVENINGS

Registration Fee

Course Fee

ONLINE STUDY + ONE DAY ZOOM SESSION
NO CLASSROOM ATTENDANCE REQUIRED


Awarding Body: Dual Accreditation - Open College Network (OCN Credit4Learning) & The CPD Certification Service (21 CPD Points)
 
Award Level: UK - Level Three (Advanced) + 21 CPD Points
Ireland Level Five (Advanced) + 21 CPD Points
 
Minimum Age: 18 (16 with parental consent)
 
Entry requirements: None. English Level 2 desirable
 
Training Locations: Study online + virtual classroom.
 
Practical Training: Includes FREE Practise@Home Phlebotomy Training Kit worth £79.99
This comprehensive 76 piece practical training kit includes mini-arm trainer, sharps container and all medical grade supplies needed as well as a step-by-step 30 minute training video.



PART 1 (THEORY) - STUDY AT HOME ONLINE :
Complete your theory training online in the comfort of your own home or at work. Stop/start when it suits you and complete the online modules at your own pace. Can be completed on multiple devices such as laptop, smart-phone, desktop computer, kindle, tablet etc.
 
PART 2 (PRACTICAL SESSIONS) - JOIN US FOR A COMPREHENSIVE ONE DAY ZOOM SESSION:
Full instructions will be provided. We will send you a completely free Practise@Home Phlebotomy Training Kit, including a mini-arm trainer, for you to keep. You will follow your tutor's on-screen instructions during your Zoom virtual classroom sessions as you learn and develop your phlebotomy skills. The procedures and practices taught online are exactly the same as you would learn in the classroom. At any time before or after your course you can watch our 30 minute step-by-step video to refresh your knowledge and continue to use your training kit to practice your skills.
 
(THIS COURSE AWARDS THE SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR CLASSROOM AND HYBRID COURSE VERSIONS)


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


COURSE ITINERARY

 
A dually-accredited hybrid modular venepuncture course awarding an
OCN Accredited Level Three Certificate (3 credits) & 21 CPD Points


Nationally Recognised Qualification


Part 1 - online (eLearning) Part 2 - Virtual Classroom (1 Day Zoom)


PRE-COURSE
Home study pack - download and complete before the virtual classroom sessions

PART 1 - ONLINE
M01: Course Overview
M02: History, Definitions and Roles
M03: Work-flow cycles
M04: Professionalism
M05: Health & Safety
M06: Blood Collection Systems
M07: Anatomy & Physiology
M08: Blood Composition
M09: Using the equipment
M10: Performing the venepuncture - see Classroom Part 2
M11: Lab Tests and Bottle Types
M12: Analytical Errors
M13: Informal Quiz – answers
M14: Award – accredited certificates, value, application and overview. Job Opportunities.


PART 2 - VIRTUAL CLASSROOM (ONE DAY ZOOM SESSION)
M01: Introduction: Welcome, Introductions and Overview.
M10: Performing the venepuncture (theory overview)
P01: Practical Session 1 – Equipment familiarisation - "Tools of the Trade"
P02A: Practical Session 2A – Unpacking your training kit
P02B: Practical Session 2B - A look at the mini-arm trainer and associated equipment
P03: Practical Session 3 – Using the tourniquet and identifying a vein
P04: Practical Session 4 – Handling and assembling the equipment. Familiarisation and procedures including initial skill-set development
P05: Practical Session 5 - Further skill-set development and consolidation. Discussing needle types including winged infusion sets (butterfly needles)
P06A: Practical Session 6A – Performing the venepuncture on the mini-arm trainer. Palpating the vein, performing the venepuncture. Sample handling and labelling.
P06B: Practical Session 6B – Consolidating pre- and post-venepuncture procedures.
 
Additional support material can be downloaded as you progress through the course online.





ZOOM SESSION

VIRTUAL CLASSROOM (ZOOM) SESSIONS 
Our Virtual Classroom training course consists of online study (Part 1 - theory) and Virtual Classroom Zoom sessions (Part 2 - practical skill-set development)
You must complete your Part 1 online study before joining us for your Zoom session(s).
Once you have enrolled on this course you will be sent a free Practise@Home Training Kit, This is yours to keep and can be reused any many time as you wish after you have completed the course.
Your Booking Confirmation will include your Zoom log-in details.



Learn how to take blood ... train as a Phlebotomist

    Nationally Recognised Qualification

    No previous experience or qualifications needed

    OCN Accredited - Level 3 (advanced)

    CPD Accredited (The CPD Certification Service)

    Covers all steps up to live blood draw

    Practise on artificial arm and fake blood!

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Introduction to Phlebotomy Course (GPT003VC) - 1 DAY Virtual Classroom

BASIC to ADVANCED COURSE PACKAGE

Complete 3 courses over 2 full days and receive three qualifications:

Introduction to Phlebotomy Certificate (Nationally Recognised Level 3, Ireland Level 5)
Days 1 and 2: 9.30am – 5.00pm

Advanced Phlebotomy Certificate (Nationally Recognised Level 4, Ireland Level 6)
Day 1: 5.30pm - 8.30pm

Geopace Certificate of Competency (Nationally Recognised Accredited, CPD Practical Skills)
Day 2: 5.30pm - 8.30pm

Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.






Key Facts & Summary:


COURSE 1: INTRODUCTION TO PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Three (Ireland Level Five)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (21 CPD Points)

PART 1 (DAY 1) - 9.30am to 5.00pm
PART 2 (DAY 2) - 9.30am to 5.00pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

A TWO DAY venepuncture course at Level 3. Trains up to the point of live blood draws.

On completion awards a Nationally Recognised and Accredited Certificate in Phlebotomy.

DAY ONE (PART 1) - THEORY
Attend the course location of your choice – starts at 9.30am and finishes approx. 5.00pm

DAY TWO (PART 2) - CLASSROOM
Your classroom tutor will recap on the theory element (above) after which you will begin your practical sessions learning and developing the skills required up to the point of Live Blood Draws.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 2: ADVANCED PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Four (Ireland Level 6)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (14 CPD Points)

PART 1 - THEORY
Complete your theory training online in the comfort of your own home or at work.

PART 2 - CLASSROOM
Follow on from your Day One Theory training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.

On completion awards a Nationally Recognised and Accredited Certificate in Advanced Phlebotomy.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 3: ROUTE TO COMPETENCY MASTERCLASS
CPD ACCREDITED - The CPD Certification Service

CLASSROOM
Follow on from your Day Two practical training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

GEOPACE LIVE BLOOD SESSIONS enabling you to draw human blood under 1-to-1 supervision of your tutor. You will follow a Competency Checklist, signed off by your tutor on completion.

On completion awards a Geopace Certificate of Competency - Nationally Recognised and Accredited Route to Competency - Live Blood Draws Certificate

DOWNLOAD A COURSE ITINERARY HERE




How do I attend?

EITHER -
CLASSROOM OPTION - Attend one of our scheduled classroom locations, completing your Introduction to Phlebotomy Course over 2 days. You will also complete your Advanced Training at the end of the first day and your Competency Training at the end of the second day.

Our Introduction to Phlebotomy and Advanced Phlebotomy Training Kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available to add at time of booking. Our comprehensive training kits each mirror the same equipment and supplies used in the classroom and both include detailed video tutorials, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for a one day Zoom session to complete your Introduction to Phlebotomy virtual classroom training, followed by your Advanced Training in the evening of the same day. You have the option to add a classroom-based competency session, awarding a CPD Accredited Geopace Certificate of Competency, at time of booking.

Our Virtual Classroom option includes two very comprehensive training kits - one for your introductory course and one for your advanced course. Kits are included at no charge (normally £79.95 each) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Please note - Competency Training
Our Route to Competency Masterclass - Live Blood Sessions can only be completed in a classroom environment. This is included when you book a classroom option. When booking the virtual classroom option you can choose to add this at time of booking. You will receive a voucher code to enable you to book onto any upcoming dates or locations. For most of our two day course we run our competency training at the end of the second day and therefore you should be able to complete your full training programme with us over two days.

If you are completing your training by virtual classroom please see our list of competency training locations here.

If you would like to "mix and match" your training dates and/or locations then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are accredited and are Skills for Health & WHO compliant.

THIS COURSE PACKAGE INCLUDES:
1: INTRODUCTION TO PHLEBOTOMY COURSE (GPT003) - Level 3 (Ireland Level 5)
2: ADVANCED PHLEBOTOMY COURSE (GPT005) - Level 4 (Ireland Level 6)
3: GEOPACE COMPETENCY CERTIFICATE - CPD Certified (optional with Virtual Classroom)

Learn how to take blood ... train as a Phlebotomist

FAST-TRACK YOUR PHLEBOTOMY TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% off -  Multi-Course Discount

    Cover all stages from beginner through to Level 4

    Available as Classroom or Virtual Classroom

    Complete your beginner to advanced training in 2 days

    Awards 2 accredited qualifications - Introduction to Phlebotomy and Advanced Phlebotomy qualifications

    Both courses are dually accredited (OCN & CPD)

    Geopace Certificate of Competency included with classroom attendance or available as an option when booking virtual classroom

    Covers all steps up to live blood draw

    Learn advanced skills and techniques

    Virtual Classroom options include comprehensive Practise@Home Training Kits (yours to keep)

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Phlebotomy Training - Beginner to Advanced PACKAGE

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span data-slate-fragment="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" id="isPasted" fr-original-style="" style="box-sizing: border-box;">One hour webinar to help prepare rally competitors for the transition to writing your own pace notes. Covering equipment needed, how to prepare, how to practice and a quick overview of Easywrite Steering Wheel Cover. What makes good pace notes - find out, it could be the most cost effective performance advantage available. All attendees will receive a 10% off Easywrite products from Rally Navigation Training Services.</span>

</p>

One hour webinar to help prepare rally competitors for the transition to writing your own pace notes. Covering equipment needed, how to prepare, how to practice and a quick overview of Easywrite Steering Wheel Cover. What makes good pace notes - find out, it could be the most cost effective performance advantage available. All attendees will receive a 10% off Easywrite products from Rally Navigation Training Services. 

Rally Navigation Training Services

Sports & Fitness

Rally training webinar covering making pace notes for special stage rallying.

Rally Pacenote Writing for Beginners

Reading

Dickson Training Ltd

ILM Level 3 Award in Leadership and Management

Online Course

Classroom Course

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><b style="color: rgb(26, 26, 26); box-sizing: border-box;" fr-original-style="color: rgb(26, 26, 26);">This driver CPC course - Customer Service &amp; Manual Handling</b><b style="color: rgb(26, 26, 26); box-sizing: border-box;" fr-original-style="color: rgb(26, 26, 26);"> is suitable for LGV &amp; PCV and will cover:</b></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Company &amp; Driver Image,&nbsp;Who Customers Are and What They Want,&nbsp;Communication Skills,&nbsp;Giving Good Customer Service,&nbsp;About Manual Handling,&nbsp;The Spine,&nbsp;Manual Handling Injuries and Their Costs,&nbsp;Regulations,&nbsp;Manual Handling Risk Assessment,&nbsp;Safe Handling Techniques,&nbsp;Manual Handling Equipment.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">All courses start at 07:45 hrs and finish at 15:45 hrs</strong></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.</strong></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Approval:</strong> This course is registered with JAUPT as approved for Driver CPC qualification.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Course Approval Number: CRS18242/475.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">On completion of the course all attendees will receive certificate of attendance.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.</p>

This driver CPC course - Rules of the Road & Manual Handling is suitable for LGV & PCV and will cover:
Requirements, Speed Limits, SMART Motorways, Highway Code, Road Signs, Bridge Strikes, Mobile Phones, Sat-Navs, Traffic Accident Procedure, About Manual Handling, The Spine, Manual Handling Injuries and Their Costs, Regulations, Manual Handling Risk Assessment, Safe Handling Techniques, Manual Handling Equipment.
All courses start at 07:45 hrs and finish at 15:45 hrs
All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.
Approval: This course is registered with JAUPT as approved for Driver CPC qualification.
Course Approval Number: CRS18242/475.
On completion of the course all attendees will receive certificate of attendance.
Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

PETM

HGV Driver

7.5 Ton Driver

Manual Handling

Driver CPC

Rules of the Road & Manual Handling - Online

<div id="course-pills-1">Duration<p>2 Days</p><p>12 CPD hours</p>This course is intended for<p>The audience for this course is anyone who wants to acquire foundation level knowledge on data centre infrastructure. This course is ideally suited for data centre new hires, internal data centre support staff, IT support staff who work in the data centre, helpdesk staff, vendors/suppliers who install/maintain data centre equipment, building maintenance staff including data centre cleaners and other supporting functions, and fresh graduates. This course is also well suited for individuals working in data centre business support functions such as sales/pre-sales, HR, Finance and business administration.</p>Overview<p>The DCFC course will prepare participants for entry into the exciting and high-growth data centre industry. It will ensure that participants acquire the required basic knowledge to take on a wide variety of jobs in the data centre industry. It will also provide the required knowledge and skill to further their training into specialised areas on data centre design/build, operations/governance or standards/compliance.</p><p>The Data Centre Foundation Certificate (DCFCÂ©) is a 2-day course designed to deliver foundation knowledge about data centre facilities infrastructure. It provides participants with global overview and knowledge on data centres which will be of advantage to the participants who are looking at joining the ranks of professionals working in the data centre, ICT, infrastructure or the mechanical and electrical (M&amp;E) design industries. It will also form a solid foundation for participants who wish to pursue his/her studies either academically or to further his/her industry specialisation with professional certification courses on data centre design/build, operations/governance and/or standards/compliance. With the tremendous growth of data and the data centres to support it, the demand for data centre professionals will grow in tandem.</p></div><div id="course-pills-2"><h4>Introduction to Data Centres</h4><ul><li>History of data centres</li><li>Definition of different type data centres</li></ul><h4>Data Centre Standards</h4><ul><li>List of standards</li><li>Rating definitions</li></ul><h4>Data Centre Facilities Areas</h4><ul><li>Listing of all areas and their functions</li></ul><h4>Topology Designs</h4><ul><li>Definition of Ratings</li></ul><h4>Components of the Power Infrastructure</h4><ul><li>Utility power</li><li>Transformers</li><li>Generators</li><li>Fuel systems</li><li>ATS</li><li>UPS systems</li><li>Batteries</li><li>Electric panels</li><li>Cabling/busbar systems</li><li>Power rails/strips</li></ul><h4>Lights</h4><ul><li>Lights</li><li>Emergency lights</li></ul><h4>Cooling Infrastructure</h4><ul><li>Chillers</li><li>DX Systems</li><li>Evaporators</li><li>CRAC/CRAU/HVAC</li><li>Raised floor</li><li>Non-raised floor</li><li>Containment</li></ul><h4>ICT/Network Infrastructure</h4><ul><li>Equipment racks</li><li>Network cabling (fibre, copper)</li><li>Cable trays and pathways</li><li>TIA-606 labelling</li></ul><h4>Data Centre Security</h4><ul><li>Perimeter security</li><li>Physical protection</li><li>CCTV</li><li>Access control</li><li>Security management</li></ul><h4>Fire Suppression</h4><ul><li>Detection systems</li><li>Suppression systems</li><li>Prevention systems</li><li>Fire extinguishers</li><li>Fire Safety</li></ul><h4>Monitoring and reporting</h4><ul><li>DCIM</li><li>EMS/BMS</li></ul></div>

Nexus Human

Design & Technology Courses (DT)

Service Design Courses (SDC)

IT Certifications

Cyber Security Foundation

Certified in Data Protection (CDP)

ICDL (International Certification of Digital Literacy)

Data Centre Foundation Certificate (DCFC)

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Sixty minute webinar on Rally Regularity Timing covering equipment required, how to keep to time, working out penalties and speed changes, this webinar focuses on styles of regularity that require the use of standard average speed tables. The competitive component of on the public highway historic road rallying, focusing on regularity using average speed tables. Ideal for competitors on events such as HRCR Clubmans Championship or Rally of the Tests</p>

Sixty minute webinar on Rally Regularity Timing covering equipment required, how to keep to time, working out penalties and speed changes, this webinar focuses on styles of regularity that require the use of standard average speed tables. The competitive component of on the public highway historic road rallying, focusing on regularity using average speed tables. Ideal for competitors on events such as HRCR Clubmans Championship or Rally of the Tests

Historic Road Rallying training webinar on Regularity focusing on Average Speed Table style regularities.

238 Courses in Nottingham

Commissioning and Start-Up Activities of Coal Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Maintenance of Steam and Gas Turbines: Inspection, Diagnostic Testing, Troubleshooting, Maintenance, Overhaul and Refurbishment

By EnergyEdge - Training for a Sustainable Energy Future

Industrial Instrumentation and Modern Control Systems

By EnergyEdge - Training for a Sustainable Energy Future

An Understanding of Oropharyngeal Suctioning

By Guardian Angels Training

Root Cause Analysis for Boilers and Steam Cycle Failures

By EnergyEdge - Training for a Sustainable Energy Future

Combustion Engineering for Coal Fired Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Transformer Maintenance

By EnergyEdge - Training for a Sustainable Energy Future

Thermal Power Plant Performance Testing

By EnergyEdge - Training for a Sustainable Energy Future

Compressors & Pumps: Selection, Applications, Operation, Troubleshooting and Maintenance

By EnergyEdge - Training for a Sustainable Energy Future

Design Of Circulating Fluidized Bed Boilers

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location