Name: Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment
Price: 3009 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans. This course provides also a comprehensive explanation of all boiler combustion control systems including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system as well as their tuning methods. All boiler control systems are covered as well in this course including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, boiler-turbine coordinated control, etc.</p>
<p>The course provides also detailed explanation of Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code). The burner management systems (BMS) and examples of boiler permissive starting logic and protective tripping logic will be explained thoroughly. The various methods used to calculate the boiler efficiency are covered in detail in this course including the direct and indirect methods. All the factors which affect the efficiency and emissions of pulverized coal boiler and CFB boiler will be explained thoroughly.</p>
<p>The course covers also all the methods used to improve the efficiency of pulverized coal boilers and CFB boilers including improvement to their combustion efficiency and control systems performance.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Boiler Combustion Equipment and Systems:</span></strong><span> Gain an in-depth understanding of all boiler combustion equipment and systems including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans</span></li>
<li><strong><span>Boiler Combustion Control Systems:</span></strong><span> Gain a thorough understanding of all boiler combustion control systems for pulverized coal boilers, and CFB boilers including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system</span></li>
<li><strong><span>Boiler Conventional Control Systems:</span></strong><span> Gain an in-depth understanding of all boiler conventional control systems including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, and boiler-turbine coordinated control</span></li>
<li><strong><span>Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code):</span></strong><span> Learn about NFPA 85 code and ANSI/ISA-77-44-01-2007 code</span></li>
<li><strong><span>Burner Management System and Boiler Permissive Starting Logic and Protective Tripping Logic:</span></strong><span> Gain an in-depth understanding of burner management system and boiler permissive starting logic and protective tripping logic</span></li>
<li><strong><span>Boiler Efficiency Calculations:</span><span> Learn how to calculate the boiler efficiency using the direct and indirect methods</span></strong></li>
<li><strong><span>Factors Affecting the Efficiency and Emissions of Boilers: </span></strong><span>Understand all the factors which affect the boiler efficiency and emissions</span></li>
<li><strong><span>Methods Used to Improve the Efficiency of Boilers:</span></strong><span> Learn about all the methods used to improve the efficiency of pulverized coal boilers, and CFB boilers including improvement to their combustion efficiency and control systems performance</span></li>
<li><strong><span>Boiler Instrument and Piping Diagrams:</span></strong><span> Gain an in-depth understanding of all boiler instrument and piping diagrams</span></li>
<li><strong><span>CFB and Pulverized Coal Boilers Equipment and Systems:</span></strong><span> Learn about various types of equipment and systems used in CFB and pulverized coal boilers including economizers, steam drum, superheaters, air preheaters, ammonia injection systems, etc.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>COMBUSTION ENGINEERING FOR COAL FIRED POWER PLANTS MANUAL (includes practical information about combustion engineering for coal fired power plants - 550 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Combustion Engineering for Coal Fired Power Plants

Team of 10, pp

Normal Fee, pp

Birmingham

Telford

This workshop/course introduces people (of any industry or position) to Emotional Intelligence (EI).
We ask you to complete a short EI self-assessment questionnaire to take away and use for your personal development.
We then introduce the ingredients of EI and chat about why they are essential, what they aim to achieve, and why they are critical to “clean” communication across the whole organisation.
We ask you to consider our Moccasin Approach® and our EI Tree® and why they are tools for the future success of internal and external communication.
We link EI to organisational culture and the inherent responsibility we all have to make our workplace culture the type that retains our people, attracts great people to join our organisation, and is a culture that we are proud to talk about because it is truly lived (not just a flag-waving exercise). 
We look at Empathy, how it works, why it is different from sympathy, and how we must all use it in our daily communication with others.
We discuss how personal styles and preferences (even bias) are critical to everyday communication.
We examine the word trust and discuss its meaning, how we can gain and maintain it, and why consistency is one of our favourite words regarding the element of trust.
We ask you to consider our thinking around 'Change Champions' and Best Practice Managers' to help create high-performing teams and cross-team collaboration and support. 



LENGTH - For more information about duration, please get in touch with us to discuss your specific needs, or we can offer advice.  
NEXT WORKSHOP START - Please ask for more information as we deliver bespoke closed events for your people at your location or a mutually suitable location.
WORKSHOP DELIVERY - The best environment for this workshop is face-to-face, but we can facilitate this workshop online.



Suitability - Who should attend?
Who? 
Everyone you employ, including your associate or external consultants.
Why? 
Every person needs to understand how EI works, what it takes to get it right, why it is essential and how it helps anyone develop new, better and more meaningful relationships.
The ultimate goal of EI is to create the best possible working relationships and Psychological Safety so that we can communicate "cleanly" without worrying about getting in trouble for sharing our thoughts and opinions.
By the way, EI is just as powerful at home, socially, and with our children. We can add Socratic questions to the mix to help us impact others' thinking.

Content
'Belief creates reality' and 'Creating reality out of possibility.'
The EI Tree®
Values, behaviours, ES2, and creating saboteurs!
How our Moccasin Approach® thinking helps us understand the world of others and cater for differences.
Our ARCHWAY Approach® thinking around Responsibility - Accountability – Duty of Care.
EI Self-assessment - The ingredients of EI.
The empathy stool and the types of empathy.
EI and how it helps 'Change Champions' and 'BPM’s'
Reflections, thoughts, findings and goals (individual and team).
Workshop delivery and venue
This Workshop is usually one day in duration but can be a two-day event with group and individual case study work to allow discussions about the various thoughts we all have about EI.
When you consider the content we deliver, we are sure you will understand why we always prefer to deliver our workshops, courses and programmes face-to-face.
Face-to-face workshops and courses can be held at a location of your choice or, if you wish, a central UK location such as the Macdonald Burlington Hotel in Birmingham, located directly across from the Birmingham New Street train station.
We can deliver our workshops, courses and programmes online, although this will mean splitting elements into manageable learning events to suit the online environment.
 

Lapd Solutions Ltd

Emotional Intelligence (EQ)

Emotional Intelligence, EQ, EI, Moccasin Approach, Moccasin Manager, 

Emotional Intelligence and Me (EI & Me)

Introductory daily rate.

Registered charities and non profits only.

Non profits only. 

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>This 5 full-day course provides a comprehensive understanding of the inspection, diagnostic testing, troubleshooting, maintenance, overhaul and refurbishment of all steam and gas turbines. This course will focus on maximizing the efficiency, reliability, and longevity of this equipment by providing an understanding of the common problems and repair techniques, preventive and predictive maintenance of all steam and gas turbines.</p>
<p>This course is a MUST for anyone who is involved in diagnostic testing, troubleshooting, or maintenance of steam and gas turbines because it covers the various maintenance strategies, troubleshooting techniques, and the latest testing and refurbishment methods of all steam and gas turbines. The course provides also guidelines and rules that ensure successful refurbishment of all types of steam and gas turbines. In addition, this course will cover in detail advanced fault detection techniques, critical components and all preventive and predictive maintenance methods of steam and gas turbines in order to increase their reliability and reduce their operation and maintenance cost.</p>
<p>This course will provide the following information for all types of steam and gas turbines:</p>
<ul>
<li>Diagnostic Testing Techniques</li>
<li>Troubleshooting Methods</li>
<li>Latest Maintenance Strategies</li>
<li>Modern Refurbishment Methods</li>
<li>Enclosures and Sealing Arrangements</li>
<li>Codes and Standards</li>
<li>Common Operational Problems</li>
<li>All Predictive and Preventive Maintenance Methods</li>
<li>Performance Surveillance Methods</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Equipment Maintenance:</span></strong><span> Gain a thorough understanding of the latest maintenance strategies of steam and gas turbines</span></li>
<li><strong><span>Equipment Diagnostics and Inspection:</span></strong><span> Learn in detail all the diagnostic techniques and inspections required for critical components of steam and gas turbines</span></li>
<li><strong><span>Equipment Testing: </span></strong><span>Understand thoroughly all the tests required for the various types of steam and gas turbines</span></li>
<li><strong><span>Equipment Troubleshooting:</span></strong><span> Determine all the troubleshooting activities required to minimize the downtime and operating cost of steam and gas turbines</span></li>
<li><strong><span>Equipment Repair and Refurbishment:</span></strong><span> Gain a detailed understanding of the various methods used to repair and refurbish steam and gas turbines</span></li>
<li><strong><span>Efficiency, Reliability, and Longevity:</span></strong><span> Learn the various methods used to maximize the efficiency, reliability, and longevity of steam and gas turbines</span></li>
<li><strong><span>Equipment Performance Surveillance:</span></strong><span> Gain a detailed understanding of the various methods used to perform performance surveillance on steam and gas turbines</span></li>
<li><strong><span>Design Features: </span></strong><span>Understand all the design features that improve the efficiency and reliability of steam and gas turbines</span></li>
<li><span><strong>Equipment Enclosures and Sealing Methods:</strong> </span><span>Learn about the various types of enclosures and sealing arrangements used for steam and gas turbines</span></li>
<li><strong><span>Equipment Commissioning:</span></strong><span> Understand all the commissioning requirements for steam and gas turbines</span></li>
<li><strong><span>Equipment Codes and Standards:</span></strong><span> Learn all the codes and standards applicable for steam and gas turbines</span></li>
<li><strong><span>Equipment Causes and Modes of Failure:</span></strong><span> Understand the causes and modes of failure of steam and gas turbines</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt in digital format of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt in digital format of the relevant chapters from the 'POWER GENERATION</span> <span>HANDBOOK' second edition, published by McGraw-Hill in 2011 (800 pages)</span></li>
<li><span>Steam and Gas Turbines Maintenance Manual (300 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Maintenance of Steam and Gas Turbines:  Inspection, Diagnostic Testing, Troubleshooting, Maintenance, Overhaul and Refurbishment

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of circulating fluidized bed (CFB) boiler coal power plants. The Commissioning Management System of CFB boiler coal power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report.</p>
<p>The course provides also a thorough understanding of all the commissioning requirements for CFB boiler and auxiliaries, turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear, and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a coal power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of CFB boiler coal power plant systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports.</p>
<p>This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any CFB boiler coal power plant equipment because it provides detailed pre-commissioning checks and detailed tests and commissioning procedures and instructions for every component in a CFB boiler coal power plant.</p>
<p>In addition, the course provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each CFB boiler coal power plant equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in CFB Boiler Coal Power Plants:</span></strong><span> Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in CFB boiler coal power plants</span></li>
<li><strong><span>Commissioning Management System of CFB Boiler Coal Power Plants:</span></strong><span> Discover the benefits of the Commissioning Management System of CFB boiler coal power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report</span></li>
<li><strong><span>Commissioning Procedures and Instructions for CFB Boiler and Auxiliaries in Coal Power Plants:</span></strong><span> Learn about the commissioning procedures and instructions for CFB boiler and auxiliaries including all commissioning activities, typical commissioning schedule, hydraulic test and wet preservation, air and gas tightness test, trial run of equipment, electronic precipitators, fuel oil system, preparation for first light up, alkali boil - out, acid cleaning and passivation, thermal flow test of economizer, water walls, and superheater, valves, steam boiling, and safety valve setting</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Turbine and Auxiliaries:</span></strong><span> Gain a thorough understanding of all the commissioning procedures and instructions for turbine and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Generator and Auxiliaries:</span></strong><span> Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Electrical Equipment: </span></strong><span>Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers, and motors</span></li>
<li><strong><span>CFB Boiler Coal Power Plant Equipment and Systems:</span></strong><span> Learn about various CFB boiler coal power plant equipment and systems including: CFB boilers, superheaters, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>CFB BOILER COAL POWER PLANT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component and system in CFB boiler coal power plants - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Commissioning and Start-Up Activities of Coal Power Plants

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Identifying and correcting the root cause of failures in boilers and steam power plant equipment is essential to help reduce the chance of future problems. A comprehensive assessment is the most effective method of determining the root cause of a failure. For example, a tube failure in a boiler is usually a symptom of other problems. To fully understand the root cause of the failure, one must investigate all aspects of boiler operation leading to the failure in addition to evaluating the failure itself. When a boiler tube failure occurs, the root cause of the failure must be identified and eliminated.</p>
<p>This 5 full-day course starts by providing an in-depth understanding of root cause analysis methodology. This includes how to identify the problem, contain and analyze the problem, define the root cause of the problem, define and implement the actions required to eliminate the root cause, and validate that the corrective actions prevented recurrence of the problem. Many practical examples on how to apply root cause analysis for various industrial problems are discussed in detail.</p>
<p>The course then provides an in-depth explanation of all failure mechanisms that occur in steam power plants including corrosion, erosion, creep, cavitation, under-deposit attacks, stress corrosion cracking, hydrogen embrittlement, flow accelerated corrosion, etc. This course also provides a thorough explanation of all the failure mechanisms that occur in boilers and steam power plant equipment including steam turbines, condensers, feedwater heaters, etc. The symptoms of the failures, possible causes, components typically affected and solutions are also provided in this course. This includes boiler waterside, fireside and general boiler failure mechanisms as well as all the causes and prevention of all steam turbine failures, condensers, and feedwater heaters. The course also includes detailed study of many case histories of failures in boilers, steam turbines, condensers and feedwater heaters.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Electrical Equipment Testing and Maintenance: </span></strong><span>Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</span></li>
<li><strong><span>Root Cause Analysis Methodology:</span></strong><span> Understand root cause analysis methodology including: identification of the problem, defining the problem, understanding the problem, identification of the root cause of the problem, providing corrective action, and monitoring the system.</span></li>
<li><strong><span>Applying the Root Cause Analysis Method to Industrial Problems:</span></strong><span> Learn by studying many practical examples how to apply the root cause analysis method to various industrial problems.</span></li>
<li><strong><span>Damage Mechanisms in Boilers and Steam Power Plant Equipment: </span></strong><span>Gain a thorough understanding of all the damage mechanisms that occur in boilers and all steam power plant equipment including turbines, condensers and feedwater heaters. These mechanisms include corrosion, erosion, flow accelerated corrosion, stress corrosion cracking, creep, under-deposit attack, cavitation, hydrogen embrittlement, etc.</span></li>
<li><strong><span>Symptoms of Failures in Boilers and Steam Power Plant Equipment, Possible Causes, Components Typically Affected, and Solutions:</span></strong><span> Learn about all the symptoms of failures in boilers and steam power plant equipment including steam turbines, condensers, and feedwater heaters, their possible causes, components typically affected and proven solutions.</span></li>
<li><strong><span>Case Histories of Failures in Boilers, Steam Turbines, Condensers, and Feedwater Heaters:</span></strong><span> Learn by studying many case histories how failures occur in boilers, steam turbines, condensers, and feedwater heaters and the corrective actions taken to deal with them</span></li>
</ul>
<p> </p>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals (this seminar is suitable for individuals who do not have an electrical background)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2011 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>ROOT CAUSE ANALYSIS FOR BOILERS AND STEAM CYCLE FAILURES MANUAL (includes practical information and case histories - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Root Cause Analysis for Boilers and Steam Cycle Failures

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines. This course will also cover in detail all the components of these turbines, instrumentation, control systems, governing systems, and selection criteria.</p>
<p>The main focus of this course will be on the failure modes of steam turbine components, causes and solutions for component failure, maintenance, refurbishment and overhaul, rotor dynamic analysis of steam turbines, and computer simulation of steam turbine rotor dynamics. All possible failure modes of steam turbine components and the maintenance required to prevent them will be discussed in detail. Examples of rotor dynamic analysis, and stability criteria will be covered thoroughly.</p>
<p>This course will also provide up-dated information in respect to all the methods used to enhance the availability, reliability, and maintainability of steam turbines, increase the efficiency and longevity of steam turbines, and improve the rotor dynamic stability. This course will also cover in detail all steam turbine valves, jacking oil system, turning gear, turbine supervisory system, steam turbine monitoring technology, validation, and verification tests, performance testing of steam turbines and steam turbine codes especially ASME PTC6.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Steam Turbine Components and Systems:</span></strong><span> Learn about all components and systems of the various types of steam turbines such as: stationary and rotating blades, casings, rotor, seals, bearings, and lubrication systems</span></li>
<li><strong><span>Steam Turbine Failure Modes, Inspection, Diagnostic Testing, and Maintenance:</span></strong><span> Understand all the failure modes of steam turbine components, causes and solutions of steam turbine component failure, inspection, diagnostic testing, and all maintenance activities required for steam turbines to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Steam Turbine Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation, control systems, and governing systems of steam turbines</span></li>
<li><strong><span>Steam Turbine Reliability and Maintainability:</span></strong><span> Increase your knowledge about all the methods used to enhance the reliability and maintainability of steam turbines as well as the predictive and preventive maintenance required for steam turbines</span></li>
<li><strong><span>Steam Turbine Selection and Applications:</span></strong><span> Gain a detailed understanding of the selection considerations and applications of steam turbines in steam power plants, co-generation, combined-cycle plants, and drivers for compressors pumps, etc</span></li>
<li><strong><span>Steam Turbine Valves, Load-Frequency Control, Turbine Bypass Systems, and Steam Turbine Superheater Attemperators:</span></strong><span> Gain a thorough understanding of all steam turbine valves, load-frequency control, turbine bypass systems, and steam turbine superheater attemperators</span></li>
<li><strong><span>Jacking Oil System and Turning Gear:</span></strong><span> Learn about the turbine jacking oil system and turning gear operation</span></li>
<li><strong><span>Turbine Supervisory System:</span></strong><span> Gain a thorough understanding of the turbine supervisory system</span></li>
<li><strong><span>Steam Turbine Monitoring Technology, Validation, and Verification Tests for Power Plants:</span></strong><span> Learn about steam turbine monitoring technology, validation, and verification tests for power plants</span></li>
<li><strong><span>Steam Turbine Codes:</span></strong><span> Learn about steam turbine codes including ASME PTC6, DIN Test Code, and International Electrotechnical Commission (IEC) Doc 1, IEC Doc B</span></li>
<li><strong><span>Steam Turbine Rotor Dynamic Analysis, Campbell, Goodman, and SAFE Diagrams: </span></strong><span>Gain a thorough understanding of steam turbine rotor dynamic analysis, Campbell, Goodman, and SAFE diagrams</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>STEAM TURBINE TECHNOLOGY MANUAL (includes practical information about steam turbines maintenance, testing, and refurbishment - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Steam Turbine Technology

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>This 5 full-day course will cover all aspects of gas turbines, co-generation and combined cycle power plants. It will cover in detail all the components of these types of power plants such as: compressors, gas and steam turbines, heat recovery steam generators, deaerators, condensers, lubricating systems, instrumentation, control systems, and economics.</p>
<p>The design, selection considerations, operation, maintenance, pay-back period, economics of co-generation plants and combined cycles, as well as, emission limits, reliability, monitoring and governing systems are also covered in detail. This course will also provide up-dated information in respect to all the significant improvements that have been made to co-generation and combined cycles power plants, during the last two decades.</p>
<p>The course will illustrate through sophisticated computer simulation how gas turbines, co-generation and combined cycle plants perform under steady-state and transient conditions. In addition, the participants will learn how to use the computer simulation program which provides the following benefits:</p>
<ol>
<li>Allow the operator to extend the gas turbine operating period by avoiding unnecessary outages and maintenance activities.</li>
<li>Determination of essential gas turbine maintenance activities to reduce the duration of outages.</li>
<li>Profit optimization of co-generation and combined cycle plants.</li>
<li>Minimization of the environmental emissions of co-generation and combined cycle plants.</li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Power Plant Computer simulation:</span></strong><span> Gain a thorough understanding of computer simulation of gas turbines, co-generation, and combined cycle plants.</span></li>
<li><strong><span>Power Plant Components and Systems: </span></strong><span>Learn about all components and subsystems of the various types of power plants such as gas turbines, co-generation and combined cycle plants</span></li>
<li><strong><span>Power Plants Economics: </span></strong><span>Examine the advantages, applications, performance and economics of power plants such as: gas turbines, co-generation, and combined cycle plants</span></li>
<li><strong><span>Power Plant Equipment: </span></strong><span>Learn about various power plant equipment including: compressors, turbines, governing systems, combustors, deaerators, feed water heaters, etc.</span></li>
<li><strong><span>Power Plant Maintenance:</span></strong><span> Learn all the maintenance activities required for power plants such as: gas turbines, co-generation plants and combined cycles to minimize their operating cost and maximize their efficiency, reliability, and longevity</span></li>
<li><strong><span>Power Plant Environmental Emissions:</span></strong><span> Learn about the monitoring and control of environmental emissions.</span></li>
<li><strong><span>Power Plant Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation and control systems of gas turbines, co-generation and combined cycles power plants</span></li>
<li><strong><span>Power Plant Reliability and Testing:</span></strong><span> Increase your knowledge of power plant predictive and preventive maintenance, reliability and testing.</span></li>
<li><strong><span>Power Plant Selection and Applications:</span></strong><span> Gain a detailed understanding of the selection considerations and applications of power plants such as: gas turbines, co-generation and combined-cycle power plants</span></li>
<li><strong><span>Power Plant Profitability:</span></strong><span> Learn about the reliability, life cycle cost, profitability, refurbishment, and life extension methods for gas turbines, co-generation and combined cycle power plants.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' second edition, published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Practical manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Gas Turbines, Co-Generation and Combined Cycle Power Plants

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course provide a comprehensive understanding of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, HART protocol, control valves, actuators, and smart technology. This course will focus on maximizing the efficiency, reliability, and longevity of these systems and equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p>
<p>This course is a MUST for anyone who is involved in the selection, applications, or maintenance of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology because it covers how these systems and equipment operate, the latest maintenance techniques, and provides guidelines and rules that ensure their successful operation. In addition, this course will cover in detail the basic design, operating characteristics, specification, selection criteria, advanced fault detection techniques, critical components and all preventive and predictive maintenance methods in order to increase the reliability of these systems andequipment and reduce their operation and maintenance cost</p>
<p>This course will provide the following information for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology:</p>
<ul>
<li>Basic Design</li>
<li>Specification</li>
<li>Selection Criteria</li>
<li>Sizing Calculations</li>
<li>Enclosures and Sealing Arrangements</li>
<li>Codes and Standards</li>
<li>Common Operational Problems</li>
<li>All Diagnostics, Troubleshooting, Testing, and Maintenance</li>
</ul>
<p>Practical applications of smart instrumentation, SCADA, and Distributed Control Systems, control valves, actuators, etc in the following industries will be discussed in detail:</p>
<ul>
<li>Chemical and petrochemical</li>
<li>Power generation</li>
<li>Pulp and paper</li>
<li>Aerospace</li>
<li>Water and sewage treatment</li>
<li>Electrical power grids</li>
<li>Environmental monitoring and control systems</li>
<li>Pharmaceutical plants</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Equipment Operation: </span></strong><span>Gain a thorough understanding of the operating characteristics of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Diagnostics and Inspection:</span></strong><span> Learn in detail all the diagnostic techniques and inspections required of critical components of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Testing:</span></strong><span> Understand thoroughly all the tests required for the various types of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Maintenance and Troubleshooting: </span></strong><span>Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Repair and Refurbishment:</span></strong><span> Gain a detailed understanding of the various methods used to repair and refurbish modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Efficiency, Reliability, and Longevity: </span></strong><span>Learn the various methods used to maximize the efficiency, reliability, and longevity of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Sizing:</span></strong><span> Gain a detailed understanding of all the calculations and sizing techniques used for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Design Features:</span></strong><span> Understand all the design features that improve the efficiency and reliability of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Selection:</span></strong><span> Learn how to select modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology by using the performance characteristics and selection criteria that you will learn in this course</span></li>
<li><span><strong>Equipment Enclosures and Sealing</strong> Methods </span><span>Learn about the various types of enclosures and sealing arrangements used for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Commissioning:</span></strong><span> Understand all the commissioning requirements for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Codes and Standards:</span></strong><span> Learn all the codes and standards applicable for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Causes and Modes of Failure:</span></strong><span> Understand the causes and modes of failure of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>System Design: </span></strong><span>Learn all the requirements for designing different types of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Industrial Instrumentation and Modern Control Systems Practical Manual (400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Industrial Instrumentation and Modern Control Systems

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVRs), governing systems, and protective systems.</p>
<p>The focus will be on maximizing the efficiency, reliability and longevity of these equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p>
<p>The emphasis of this course is on protective systems, inspection methods, diagnostic testing, troubleshooting, modern maintenance techniques, refurbishment, rewind and upgrade options, as well as advanced methods for preventing partial discharge and other failures.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Equipment Operation:</strong> Gain a thorough understanding of the operating characteristics of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Diagnostics and Inspection:</strong> Learn in detail all the diagnostic techniques and inspections required of critical components of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Testing:</strong> Understand thoroughly all the tests required for the various types of generators, exciters, AVR's and protective systems</li>
<li><strong>Electrical Generator Protective Systems:</strong> Gain a thorough understanding of all Electrical generator protective systems including: all electrical relays, tripping mechanisms, protective systems for negative phase sequence (unbalance loading), loss of excitation, over fluxing protection (over-voltage and underfrequency), reverse power (generator monitoring), over-speeding, pole slipping / out of step (sudden increase in torque or weakness in excitation), Class A protection, Class B protection</li>
<li><strong>Equipment Maintenance and Troubleshooting:</strong> Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Repair and Refurbishment:</strong> Gain a detailed understanding of the various methods used to repair and refurbish generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Rewind and Upgrade Options:</strong> Discover all options available to rewind and upgrade the generator rotor and stator to enhance the output and reduce downtime</li>
<li><strong>Efficiency, Reliability, and Longevity:</strong> Learn the various methods used to maximize the efficiency, reliability, and longevity of generators, exciters, AVR's and protective systems</li>
<li><strong>Advanced Methods to Prevent Failure:</strong> Gain a thorough understanding of all the methods used to prevent partial discharge, and other failures in generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Sizing:</strong> Gain a detailed understanding of all the calculations and sizing techniques used for generators, exciters, AVR's and protective systems</li>
<li><strong>Design Features:</strong> Understand all the design features that improve the efficiency, reliability of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Selection:</strong> Learn how to select generators, exciters, AVR's and protective systems by using the performance characteristics and selection criteria that you will learn in this course</li>
<li><strong>Equipment Enclosures and Sealing Methods:</strong> Learn about the various types of enclosures and sealing arrangements used for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Commissioning:</strong> Understand all the commissioning requirements for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Codes and Standards:</strong> Learn all the codes and standards applicable for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Causes and Modes of Failures:</strong> Understand causes and modes of failures of generators, exciters, AVR's and protective systems</li>
<li><strong>System Design:</strong> Learn all the requirements for designing different types of generators, exciters, AVR's and protective systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Generator Inspection, Testing, Maintenance, Protective Systems and Refurbishment Manual (this manual covers all the inspection and maintenance activities as well as all protective systems required for generators - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Electrical Generators, Excitation Systems and Governing Systems

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of all the maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems of all key electrical equipment including: transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries. It will cover in detail all the inspection methods and tests required to identify faults and deficiencies in electrical equipment, as well as, the repair techniques and available refurbishment methods.</p>
<p>The course will also cover the activities required to commission this equipment and it will also cover all protective systems associated with this equipment.  The objective of the seminar is to maximize the efficiency, reliability, and longevity of this type of equipment by providing an understanding of the common problems and repair techniques, preventive and predictive maintenance.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Electrical Equipment Testing and Maintenance: </strong>Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Inspection and Diagnostics: </strong>Learn about the inspection and diagnostics required for all the components of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Troubleshooting:</strong> Determine all the troubleshooting activities required to minimize the downtime and operating cost of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Online Condition Monitoring:</strong> Learn about online condition monitoring of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Repair and Refurbishment: </strong>Obtain a detailed understanding of the various methods used to repair and refurbish transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Efficiency, Reliability, and Longevity: </strong>Learn the various methods used to maximize the efficiency, reliability, and longevity of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Rotating </strong><strong>Equipment Vibration Analysis and Balancing Methods:</strong> Learn about vibration analysis and balancing methods of motors and generators.</li>
<li><strong>Electrical Equipment Codes and Standards: </strong>Learn all the codes and standards applicable for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Equipment Causes and Modes of Failure: </strong>Understand the causes and modes of failure of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Generator Upgrades and Rewinds:</strong> Learn the various methods used to upgrade and rewind a generator</li>
<li><strong>Protective Systems: </strong>Obtain a detailed understanding of all protective systems required for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals (this course is suitable for individuals who do not have an electrical background)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>The relevant material of the 'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Electrical Equipment Maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems Manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment

Elevate your auditing expertise and lead the way in quality management with our ISO 9001:2015 Lead Auditor course, certified by CQI and IRCA. This comprehensive program is designed for professionals seeking to conduct first, second, and third-party audits of Quality Management Systems (QMS) against the ISO 9001:2015 standard.
Our course provides in-depth training on the principles and practices of auditing, equipping you with the knowledge and skills to effectively lead audit teams and assess the conformance and effectiveness of QMS in organizations. You will learn how to plan, conduct, report, and follow up on audits in compliance with ISO 19011 guidelines and ISO/IEC 17021 standards.
Key Features of the Course:
Certified Expertise: Achieve a globally recognized certification from CQI and IRCA, enhancing your professional credibility and career prospects.
Experienced Instructors: Learn from industry experts with extensive experience in quality management and auditing, who provide real-world insights and practical guidance.
Interactive Learning: Engage in hands-on exercises, case studies, and role-play scenarios that simulate real auditing situations, ensuring that you can apply what you learn directly to your work.
Comprehensive Curriculum: Cover all aspects of the ISO 9001:2015 standard, audit principles, and techniques, as well as risk-based thinking and the process approach.
Career Advancement: This course is ideal for those aspiring to become lead auditors, quality managers, or consultants, offering a pathway to new opportunities and enhanced professional status.
Upon successful completion of the course and examination, you will be awarded the prestigious CQI and IRCA certification, recognized globally as a mark of excellence in auditing. This certification will enable you to conduct audits for certification bodies and help organizations achieve compliance and continual improvement.
Enroll in our ISO 9001:2015 Lead Auditor course today and take the next step in your journey to becoming a leader in quality management.

QUALITY ACADEMY

Quality Management System

ISO 9001

Quality Management

Quality Assurance

Quality Auditor

Become a certified ISO 9001:2015 Lead Auditor with our CQI and IRCA accredited course. Gain the skills to lead quality management audits and enhance your career. Enroll now!

ISO 9001:2015 Lead Auditor (CQI and IRCA Certified)

General Admission

Bournemouth

London Waterloo Academy

Dental Nurse

Dental Assistant

VIRTUAL DENTAL NURSING DIPLOMA

Registration Fee

Tuition Fee

Exam Fee

One Day Introduction Course

Swansea

ONLINE STUDY + ONE DAY ZOOM SESSION
NO CLASSROOM ATTENDANCE REQUIRED


Awarding Body: Dual Accreditation - Open College Network (OCN Credit4Learning) & The CPD Certification Service (21 CPD Points)
 
Award Level: UK - Level Three (Advanced) + 21 CPD Points
Ireland Level Five (Advanced) + 21 CPD Points
 
Minimum Age: 18 (16 with parental consent)
 
Entry requirements: None. English Level 2 desirable
 
Training Locations: Study online + virtual classroom.
 
Practical Training: Includes FREE Practise@Home Phlebotomy Training Kit worth £79.99
This comprehensive 76 piece practical training kit includes mini-arm trainer, sharps container and all medical grade supplies needed as well as a step-by-step 30 minute training video.



PART 1 (THEORY) - STUDY AT HOME ONLINE :
Complete your theory training online in the comfort of your own home or at work. Stop/start when it suits you and complete the online modules at your own pace. Can be completed on multiple devices such as laptop, smart-phone, desktop computer, kindle, tablet etc.
 
PART 2 (PRACTICAL SESSIONS) - JOIN US FOR A COMPREHENSIVE ONE DAY ZOOM SESSION:
Full instructions will be provided. We will send you a completely free Practise@Home Phlebotomy Training Kit, including a mini-arm trainer, for you to keep. You will follow your tutor's on-screen instructions during your Zoom virtual classroom sessions as you learn and develop your phlebotomy skills. The procedures and practices taught online are exactly the same as you would learn in the classroom. At any time before or after your course you can watch our 30 minute step-by-step video to refresh your knowledge and continue to use your training kit to practice your skills.
 
(THIS COURSE AWARDS THE SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR CLASSROOM AND HYBRID COURSE VERSIONS)


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


COURSE ITINERARY

 
A dually-accredited hybrid modular venepuncture course awarding an
OCN Accredited Level Three Certificate (3 credits) & 21 CPD Points


Nationally Recognised Qualification


Part 1 - online (eLearning) Part 2 - Virtual Classroom (1 Day Zoom)


PRE-COURSE
Home study pack - download and complete before the virtual classroom sessions

PART 1 - ONLINE
M01: Course Overview
M02: History, Definitions and Roles
M03: Work-flow cycles
M04: Professionalism
M05: Health & Safety
M06: Blood Collection Systems
M07: Anatomy & Physiology
M08: Blood Composition
M09: Using the equipment
M10: Performing the venepuncture - see Classroom Part 2
M11: Lab Tests and Bottle Types
M12: Analytical Errors
M13: Informal Quiz – answers
M14: Award – accredited certificates, value, application and overview. Job Opportunities.


PART 2 - VIRTUAL CLASSROOM (ONE DAY ZOOM SESSION)
M01: Introduction: Welcome, Introductions and Overview.
M10: Performing the venepuncture (theory overview)
P01: Practical Session 1 – Equipment familiarisation - "Tools of the Trade"
P02A: Practical Session 2A – Unpacking your training kit
P02B: Practical Session 2B - A look at the mini-arm trainer and associated equipment
P03: Practical Session 3 – Using the tourniquet and identifying a vein
P04: Practical Session 4 – Handling and assembling the equipment. Familiarisation and procedures including initial skill-set development
P05: Practical Session 5 - Further skill-set development and consolidation. Discussing needle types including winged infusion sets (butterfly needles)
P06A: Practical Session 6A – Performing the venepuncture on the mini-arm trainer. Palpating the vein, performing the venepuncture. Sample handling and labelling.
P06B: Practical Session 6B – Consolidating pre- and post-venepuncture procedures.
 
Additional support material can be downloaded as you progress through the course online.





ZOOM SESSION

VIRTUAL CLASSROOM (ZOOM) SESSIONS 
Our Virtual Classroom training course consists of online study (Part 1 - theory) and Virtual Classroom Zoom sessions (Part 2 - practical skill-set development)
You must complete your Part 1 online study before joining us for your Zoom session(s).
Once you have enrolled on this course you will be sent a free Practise@Home Training Kit, This is yours to keep and can be reused any many time as you wish after you have completed the course.
Your Booking Confirmation will include your Zoom log-in details.



Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

Learn how to take blood ... train as a Phlebotomist

    Nationally Recognised Qualification

    No previous experience or qualifications needed

    OCN Accredited - Level 3 (advanced)

    CPD Accredited (The CPD Certification Service)

    Covers all steps up to live blood draw

    Practise on artificial arm and fake blood!

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Introduction to Phlebotomy Course (GPT003VC) - 1 DAY Virtual Classroom

Southend on Sea

Rotherham

Manchester

Slough

Portsmouth

Bingley

Nottingham

Paisley

Luton

Northampton

Bedford

Liverpool 

BASIC to ADVANCED COURSE PACKAGE

Complete 3 courses over 2 full days and receive three qualifications:

Introduction to Phlebotomy Certificate (Nationally Recognised Level 3, Ireland Level 5)
Days 1 and 2: 9.30am – 5.00pm

Advanced Phlebotomy Certificate (Nationally Recognised Level 4, Ireland Level 6)
Day 1: 5.30pm - 8.30pm

Geopace Certificate of Competency (Nationally Recognised Accredited, CPD Practical Skills)
Day 2: 5.30pm - 8.30pm

Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.






Key Facts & Summary:


COURSE 1: INTRODUCTION TO PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Three (Ireland Level Five)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (21 CPD Points)

PART 1 (DAY 1) - 9.30am to 5.00pm
PART 2 (DAY 2) - 9.30am to 5.00pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

A TWO DAY venepuncture course at Level 3. Trains up to the point of live blood draws.

On completion awards a Nationally Recognised and Accredited Certificate in Phlebotomy.

DAY ONE (PART 1) - THEORY
Attend the course location of your choice – starts at 9.30am and finishes approx. 5.00pm

DAY TWO (PART 2) - CLASSROOM
Your classroom tutor will recap on the theory element (above) after which you will begin your practical sessions learning and developing the skills required up to the point of Live Blood Draws.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 2: ADVANCED PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Four (Ireland Level 6)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (14 CPD Points)

PART 1 - THEORY
Complete your theory training online in the comfort of your own home or at work.

PART 2 - CLASSROOM
Follow on from your Day One Theory training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.

On completion awards a Nationally Recognised and Accredited Certificate in Advanced Phlebotomy.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 3: ROUTE TO COMPETENCY MASTERCLASS
CPD ACCREDITED - The CPD Certification Service

CLASSROOM
Follow on from your Day Two practical training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

GEOPACE LIVE BLOOD SESSIONS enabling you to draw human blood under 1-to-1 supervision of your tutor. You will follow a Competency Checklist, signed off by your tutor on completion.

On completion awards a Geopace Certificate of Competency - Nationally Recognised and Accredited Route to Competency - Live Blood Draws Certificate

DOWNLOAD A COURSE ITINERARY HERE




How do I attend?

EITHER -
CLASSROOM OPTION - Attend one of our scheduled classroom locations, completing your Introduction to Phlebotomy Course over 2 days. You will also complete your Advanced Training at the end of the first day and your Competency Training at the end of the second day.

Our Introduction to Phlebotomy and Advanced Phlebotomy Training Kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available to add at time of booking. Our comprehensive training kits each mirror the same equipment and supplies used in the classroom and both include detailed video tutorials, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for a one day Zoom session to complete your Introduction to Phlebotomy virtual classroom training, followed by your Advanced Training in the evening of the same day. You have the option to add a classroom-based competency session, awarding a CPD Accredited Geopace Certificate of Competency, at time of booking.

Our Virtual Classroom option includes two very comprehensive training kits - one for your introductory course and one for your advanced course. Kits are included at no charge (normally £79.95 each) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Please note - Competency Training
Our Route to Competency Masterclass - Live Blood Sessions can only be completed in a classroom environment. This is included when you book a classroom option. When booking the virtual classroom option you can choose to add this at time of booking. You will receive a voucher code to enable you to book onto any upcoming dates or locations. For most of our two day course we run our competency training at the end of the second day and therefore you should be able to complete your full training programme with us over two days.

If you are completing your training by virtual classroom please see our list of competency training locations here.

If you would like to "mix and match" your training dates and/or locations then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are accredited and are Skills for Health & WHO compliant.

THIS COURSE PACKAGE INCLUDES:
1: INTRODUCTION TO PHLEBOTOMY COURSE (GPT003) - Level 3 (Ireland Level 5)
2: ADVANCED PHLEBOTOMY COURSE (GPT005) - Level 4 (Ireland Level 6)
3: GEOPACE COMPETENCY CERTIFICATE - CPD Certified (optional with Virtual Classroom)

Learn how to take blood ... train as a Phlebotomist

FAST-TRACK YOUR PHLEBOTOMY TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% off -  Multi-Course Discount

    Cover all stages from beginner through to Level 4

    Available as Classroom or Virtual Classroom

    Complete your beginner to advanced training in 2 days

    Awards 2 accredited qualifications - Introduction to Phlebotomy and Advanced Phlebotomy qualifications

    Both courses are dually accredited (OCN & CPD)

    Geopace Certificate of Competency included with classroom attendance or available as an option when booking virtual classroom

    Covers all steps up to live blood draw

    Learn advanced skills and techniques

    Virtual Classroom options include comprehensive Practise@Home Training Kits (yours to keep)

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Phlebotomy Training - Beginner to Advanced PACKAGE

<p style="color: rgb(28, 28, 28); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(28, 28, 28);">This course, worth 30 hours of verifiable CPD, will demonstrate your ability to grade and reflect upon your impression technique and demonstrate competence to take impressions unsupervised under prescription.</p><p style="color: rgb(28, 28, 28); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(28, 28, 28);"><img src="https://cavitytraining.co.uk/app/uploads/2023/11/cpdmember.png" alt="CPD member" width="162" height="149" srcset="https://cavitytraining.co.uk/app/uploads/2023/11/cpdmember.png 397w, https://cavitytraining.co.uk/app/uploads/2023/11/cpdmember-300x276.png 300w, https://cavitytraining.co.uk/app/uploads/2023/11/cpdmember-320x294.png 320w" sizes="(max-width: 162px) 100vw, 162px" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Learn about the Cavity Training Impression Taking Course</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The course is suited to nurses who aspire to treat patients directly and to take impressions or scan for impressions under the prescription of a registered dentist or clinical dental technician.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To enrol, you must be GDC-registered, work in surgery and hold indemnity insurance. (extended duties) You will need a GDC registered dental professional able and willing to supervise you.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">You also need to complete an Anaphylaxis Awareness course &ndash; we offer a free CPD course for this.</p><div fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Frequently Asked Questions</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">How long is the course?</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The course duration is 2 to 6 months.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">When are the classes held?</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">You will attend a live webinar class for two Saturday mornings.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Is there an exam at the end?</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">There is no exam at the end, you need to successfully complete 24 assessments with your practice mentor and a complete a 500 word dissertation.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">What qualifications do I need to start the course?</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Preferable English and Maths level 4 and above, you must also be GDC registered.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">What opportunities for progression is there?</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This qualification allows candidates to further progress onto various post registration qualifications or career opportunities, such as:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">The Certificates in Orthodontic Nursing</li><li fr-original-style="" style="box-sizing: border-box;">Extending a career in prosthetics.</li><li fr-original-style="" style="box-sizing: border-box;">Training as a Lab Technician</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><article style="color: rgb(28, 28, 28); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(28, 28, 28);"><article style="color: rgb(28, 28, 28); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(28, 28, 28);"><h3 style="color: var(--color-heading-text); box-sizing: border-box;" fr-original-style=" color: var(--color-heading-text);">Course Dates</h3><ul style="color: var(--color-body-text); box-sizing: border-box;" fr-original-style=" color: var(--color-body-text);"><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">13th - 27th April 2024</strong><br fr-original-style="" style="box-sizing: border-box;">9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">11th - 25th May 2024</strong><br fr-original-style="" style="box-sizing: border-box;">9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">8th - 22nd June 2024</strong><br fr-original-style="" style="box-sizing: border-box;">9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">13th - 27th July 2024</strong><br fr-original-style="" style="box-sizing: border-box;">9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">3rd - 17th August 2024</strong><br fr-original-style="" style="box-sizing: border-box;">9:30am - 1:30pm</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">7th - 21st September 2024</strong><br fr-original-style="" style="box-sizing: border-box;">9:30am - 1:30pm</li></ul></article><article style="color: rgb(28, 28, 28); box-sizing: border-box;" fr-original-style=" color: rgb(28, 28, 28);"><h3 style="color: var(--color-heading-text); box-sizing: border-box;" fr-original-style=" color: var(--color-heading-text);">Costs</h3><p style="color: var(--color-body-text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: var(--color-body-text);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&pound;180.00 per person (inc. VAT)</strong></p><p style="color: var(--color-body-text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: var(--color-body-text);">Please choose from one of the course dates above. Each course is 2 days. The dates above indicate the 2 days of the course.</p></article></article><article style="color: rgb(28, 28, 28); box-sizing: border-box;" fr-original-style=" color: rgb(28, 28, 28);"><br fr-original-style="" style="box-sizing: border-box;"></article>

Cavity Dental Training

Advanced Certificate in Impression Taking including Intra Oral Scanning

Burnley

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Have you ever wondered what is Reiki and would like to know more, then this course is for you if you would like to learn more about Reiki</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">This Reiki Level One course is for you if you have heard a lot about Reiki and are interested in learning more about Reiki and is an introductory course on how to use Reiki healing techniques.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">This is where you begin and my online course will teach you all you need to know to get you started with using Reiki on yourself and it is very simple to learn and to use. It is a gentle hands-on healing technique, which uses healing energy to treat any physical or emotional concerns.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Reiki is a helpful self-development technique for anyone wanting to learn more about reiki and how to enjoy the benefits of a healing treatment.</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The Reiki One course is taught live on line using Zoom.</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What will I learn on this course:-</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">What is Reiki and its history?</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">The Principles of Reiki</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Auras and chakras</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Preparation for your initiation to the Reiki energy or attunement</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">What does the Reiki energy feel like?</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">21 day cleansing process</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">How to practise self-healing on yourself</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Reiki and its uses with other therapies</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Your own Reiki Lineage</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Question and answer session&nbsp;</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">You will be initiated to the Reiki energy by an attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">The course can be booked online here and you will receive instructions on how to access the course.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(111, 114, 135);">I look forward to meeting you and sharing my knowledge and experience of Reiki with you.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What this course offers you:</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Individual Support &ndash; During and after your course, if you have any questions</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Practical Experience &ndash; Step by step training is given so that you can gain valuable experience using Reiki on yourself</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Energy Perception &ndash; You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Personal Growth &ndash; You will discover for yourself the gift of Reiki healing and have increased confidence to use it for self-healing</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Testimonials:- What other students who have attended my courses are saying &nbsp;</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Level One Course</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">&ldquo;I enjoyed this course and Margaret is a great teacher and her calming voice explains everything clearly&rdquo;. (Anne-Marie M)</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">&ldquo;This is a very informative course. It gave me everything I needed to know to start working with the Reiki energy. (Sally R.)</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">&ldquo;This course is excellent!&rdquo; (Phil T)</p>

Margaret Cook - Learn More About Reiki

Energy Healing

Reiki

Reiki Healer

I am a Reiki Teacher in Manchester and one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course. I teach all three levels of Reiki courses, level 1 reiki. level 2 reiki and reiki master level 3

Reiki Level One Online Course - New to Reiki this is for you

Brighton

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (Foundation Degree Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M00 - Introduction:
Learning outcomes, Assumptions and Overview.
M01 - Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to
the advanced course.
M02 - Aspirated and Vacuated Systems:
Open systems (Syringe & Needle), closed systems (Vacutainer & Monovette), Alternative closed systems, Using Monovette - aspiration and evacuated techniques, monovette adapter systems.
M03 - Specialised and Advanced Phlebotomy Equipment:
The centrifuge - overview. Safe operation and use. Managing a centrifuge breakage or spillage.
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at
0 degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
M04 - Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC tests. Roles for phlebotomists performing POC Tests.
M05 - Neonates and Children:
Sample collection from new-born to pre-adult. A detailed overview of legal principles of law including child consent and child protection for phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedures including
microtainers, lancets and capillary tube collection. Detailed heel prick procedure. Paediatric finger prick collection. The life-threatening hazard of over-collecting. Communication techniques in differing age bands.
Consent and the law. Basic principles of lawful consent for neonates and paediatric patients. Child protection.
Detailed analysis of neonatal and paediatric blood collection including Guthrie card collection. Neonatal bottles - colours and tests. Paediatric blood gases collection.
Butterfly needles - when to use. Blood tests during pregnancy. Neonatal blood screening - nine conditions covered. Bilirubin in neonates.
M06 - Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin changes and venepuncture implications. A profile of common
geriatric blood tests. Age related problems. Procedural precautions.
M07 - Special Procedures:
Drawing blood from back of hand. Drawing blood from lower limb veins. Managing the unwilling or difficult patient. Managing the psychiatric patient. Managing the isolated patient. Non-routine blood tests. Managing the latex allergy patient (type 1 and type 4 reactions). Latex indicators. Sample handling - non-routine procedures. Drug trials and research projects.
M08 - Special Tests and Sample Handling Procedures:
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group - collection notes, analytic time, optimal collection time and notes for each group.
M09 - Advanced Phlebotomy Tasks:
Additional procedures. Maintaining POC equipment. Stock control and stock rotation. Quality control. Data entry. Product evaluation. Training and competency evaluation.
M10 - Alternative Environments:
A step-by-step look at non-clinical phlebotomy environments including private testing, DEFRA, forensic and police, cord blood collection, DNA analysis, veterinary services, overseas and volunteering.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM)
MORNING , AFTERNOON OR EVENING SESSION:

1 - Welcome, introductions and overview:
- Classroom - health & safety briefing, schedule overview.
- Virtual Classroom - audio/visual checks and registration. Unpacking and overview of your training kit.
2 - Syringe and Needle (open system): Correct use and applications.
3 - Monovette (open and closed systems):
Using the Monovette system in aspiration mode - correct use and applications.
Using the Monovette system in evacuated mode - correct use and applications.
4 - IR Vein Detector:
Demonstration of the IR vein detector for assisting in detection of difficult veins.
5 - Veins in back of hand:
Detecting suitable veins in the back of the hand.
6 - POC testing:
Point of Care Testing - use of glucose meter to demonstrate a typical POC test procedure. Correct use and overview of other POC test devices.
7 - Using lancets (finger collection)
We look at the correct use of lancets for POC testing and whole blood micro-collection.
8 - Using lancets (heel collection)
We look at the correct use of lancets for neonatal blood spot tests (Guthrie Test).
9 - Capillary collection
Using glass capillary tubes for micro-collection. Correct use and handling.
10 - Microtube collection
Correct use of BD Microtainers (and similar micro-collection bottles) - collection and handling.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6)

    FDSc (Foundation Degree Level) qualification

    Nationally Recognised certificate

    Dually accredited: Open College Network  and CPD

    Covers both aspirated and evacuated systems

    Covers specialised blood collection systems & methods

    Classroom or Virtual Classroom learning options

    Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep)

    Complete your training from beginner to advanced level

    This course either follows on from our Introduction to Phlebotomy Course  or can be combined with our introductory course as part of a course package (see below)

    Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.


Advanced Phlebotomy - Skills & Techniques (GPT005)

Cardiff

Milton Keynes 

<div data-testid="richTextElement" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">ONLINE STUDY - In your own time (approx. 6 hours study time) +</span></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><br fr-original-style="" style="box-sizing: border-box;"></span></strong></span></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Awarding Body:</strong>&nbsp;Open College Network (OCN) Credit for Learning</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Award Level:</strong>&nbsp;Level 3 (Advanced Level) - Ireland Level 5</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">CPD Certified:</strong>&nbsp;Yes (CPD Accreditation)</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Minimum Age:&nbsp;</strong>18 (16 with parental consent)</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Entry requirements:&nbsp;</strong>None. (English Level 2 desirable)</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Training Locations:</strong>&nbsp;Study online + Classroom</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">&nbsp;</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(255, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(255, 0, 0);">OCN Accredited at UK Level 3 (Ireland Level 5)</span><br fr-original-style="" style="box-sizing: border-box;"></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">&nbsp;</p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PART 1 - Theory:</strong>&nbsp;Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PART 2 - Skills and Practical Development:</strong><br fr-original-style="" style="box-sizing: border-box;">Safely and competently set up and maintain a Peripheral IV Infusion.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Attend a classroom location to complete your practical training.<br fr-original-style="" style="box-sizing: border-box;"></strong></p><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><span style="color: rgb(184, 49, 47); box-sizing: border-box;" fr-original-style="color: rgb(184, 49, 47);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;">Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></strong></span></p></div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Course Itinerary:</strong></div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></strong></div><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PART 1 - THEORY (ONLINE)</strong><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M1 - Peripheral IV Cannulation - Introduction:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Definitions - understanding terminology relating to PIVC.<br fr-original-style="" style="box-sizing: border-box;">IV Therapy and NMC guidelines.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M2 - Legal &amp; Professional Responsibilities:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Legal Obligations and Accountability. Criminal, Civil and<br fr-original-style="" style="box-sizing: border-box;">Contractual law in Healthcare. Vicarious Liability and your<br fr-original-style="" style="box-sizing: border-box;">Duty of Care.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M3 - Anatomy &amp; Physiology:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Sites appropriate to IV cannulation. Hand vs. arm.<br fr-original-style="" style="box-sizing: border-box;">Advantages and disadvantages of relevant veins.<br fr-original-style="" style="box-sizing: border-box;">An overview of Homeostasis and Fluid Balance.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M4 - Hygiene and Infection Prevention &amp; Control (IPC):</strong></span><br fr-original-style="" style="box-sizing: border-box;">Reducing healthcare-associated infections. Keeping Safe.<br fr-original-style="" style="box-sizing: border-box;">Bloodborne Pathogens and Work Practice Controls.<br fr-original-style="" style="box-sizing: border-box;">Standard Precautions. Waste Disposal. Needle-stick injuries.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M5 - Indications and Advantages:</strong></span><br fr-original-style="" style="box-sizing: border-box;">When to cannulate, infusion types and benefits over<br fr-original-style="" style="box-sizing: border-box;">alternative infusion routes. Continuous and intermittent infusion.<br fr-original-style="" style="box-sizing: border-box;">Prophylactic use before procedures and in unstable patients.<br fr-original-style="" style="box-sizing: border-box;">Contraindications.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M6 - Equipment:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Cannula types, sizes and colour coding. How to select<br fr-original-style="" style="box-sizing: border-box;">appropriate size. Equipment overview for total procedure.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M7 - Vein Choice for Cannulation:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Correct vein selection. Which veins to avoid.<br fr-original-style="" style="box-sizing: border-box;">How to manage an unsuccessful cannulation.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M8 - Procedures:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Full procedure for cannulation including correct documentation.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M8: Guide to Cannulation - revision</strong></span><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M8: Video - Recap with full procedure</strong></span><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M9 - Contraindications:</strong></span><br fr-original-style="" style="box-sizing: border-box;">When inappropriate to cannulate including patients with specific health conditions.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 128, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 128, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">M10 - Complications:</strong></span><br fr-original-style="" style="box-sizing: border-box;">A detailed look at potential complications during and after<br fr-original-style="" style="box-sizing: border-box;">cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED</strong><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">BEFORE JOINING US FOR YOUR PRACTICAL TRAINING</strong><br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">PART 2 (CLASSROOM:</span><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"></strong></strong><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">1 - Welcome, introductions and overview:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Classroom - registration and introductions.<br fr-original-style="" style="box-sizing: border-box;">Virtual Classroom - audio/visual checks and registration.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">2 - Legal &amp; Professional Responsibilities:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Overview and discussion.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">3 - Anatomy - key points (appropriate to PIVC):</strong></span><br fr-original-style="" style="box-sizing: border-box;">Arteries and veins. Selecting an approprate site. Sites to avoid and &ldquo;first choice&rdquo; sites.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">4 - Cannulae - selection and types:</strong></span><br fr-original-style="" style="box-sizing: border-box;">A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">5 - Complications:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Complications of pVAD insertion including examples of<br fr-original-style="" style="box-sizing: border-box;">infiltration, haematoma, extravasation and transfixation.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">6 - VIP Score:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Understanding and using the Visual Infusion Phlebitis score.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">7 - Equipment - overview:</strong></span><br fr-original-style="" style="box-sizing: border-box;">We take a look at all essential equipment required for PIVC.<br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">8 - PRACTICAL SESSIONS:</strong><br fr-original-style="" style="box-sizing: border-box;">Multiple practical sessions throughout the session.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">9 - Fluids:</strong></span><br fr-original-style="" style="box-sizing: border-box;">The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann&rsquo;s solution, Colloids (and risks), blood products.<br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(128, 0, 128); box-sizing: border-box;" fr-original-style=" color: rgb(128, 0, 128);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">10 - Infusion Rates:</strong></span><br fr-original-style="" style="box-sizing: border-box;">Calculating infusion rates and drops per minute.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;">This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.</em></strong></p><p style="color: rgb(85, 85, 85); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">&nbsp;</p><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)</strong></em></p></div></div><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p>

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Intravenous Cannulation

Aesthetics

Medicine & Nursing

Venepuncture & Cannulation

Learn how to cannulate ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced) - Ireland Level 5

    CPD Accredited - The CPD Certification Service

    Classroom or Virtual Classroom options

    Covers all steps for cannulating in arm or hand

    Practise on artificial arms and fake blood!

    Essential qualification for all IV therapies

    Phlebotomy training desirable but not essential

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Peripheral I.V. Cannulation Course (GPT008)

Key Facts:


COURSE 1: PERIPHERAL I.V. CANNULATION COURSE (GPT008)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.

 
Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)
Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.





Key Facts:


COURSE 2: VACCINATION / INJECTION COURSE (GPT601)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)


Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (FDSc Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)



SUITABLE FOR:
- MEDICAL / HEALTHCARE (trainees and professionals)
- AESTHETIC THERAPISTS (all levels)

 
This Vaccination / Injection Course is a nurse or paramedic-led half-day session covering all essential theory and practical skill-sets required to deliver effective Intramuscular, Intradermal and Subcutaneous injections / vaccinations.
 
PART 1 - THEORY (online)
Delegates will fully understand the theory and will be able to demonstrate they can identify the correct patient, gain consent and safely administer a vaccine or injection, conforming to WHO and Skills for Health recommended standards.
 
Itinerary:
M01 Course Overview and brief history
M02 Infection Protection Control
M03 Professionalism and Effective Communication
M04 Understanding injection procedures
M05 Why do we vaccinate?
M06 The immune system and how vaccines work. Vaccine types and composition.
M07 The National Vaccine Policy & Schedule
M08 Vaccine preventable diseases
M08A – Covid-19 Update
M09 Vaccines - understanding the reconstitution process
M10 Storage and Handling – understanding correct procedures and protocols
M11 Equipment – Syringes and Syringe Types, Needles and Needle Types, SDV (Single-Dose Vials), MDV (Multi-Dose Vials), Pre-Filled Syringes, Gloves and PPE.
M12 Vaccination sites, techniques and anatomical site selection
i) Intramuscular (IM) Injection
ii) Subcutaneous (SubCut) Injection
iii) Intradermal (ID) Injection
M13 Legal requirements, Consent and Standard Operating Procedures
M14 Adverse Reactions and Basic Life Support Guidance
M15 Record keeping & Documentation
 
PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING
PART 2 - CLASSROOM (am, pm or evening sessions)
3 - 4 hours skill-set development with practical demonstrations and hands-on experience performing Intramuscular, Intradermal and Subcutaneous Injections.
 


How do I attend?

EITHER -
CLASSROOM OPTION - Complete your theory training online at home or work, then attend one of our scheduled classroom locations, completing your Peripheral IV Cannulation Course and your Injection Course on the same day.
Our Peripheral IV Cannulation Course and Injection Course training kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available for you to add at time of booking. Training kits mirror the same equipment and supplies used in the classroom and both include detailed video instructions, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for your one full day to complete your cannulation and injection course training.

Our Virtual Classroom option includes two very comprehensive training kits - one for your cannulation course and one for your injection course. Kits are included at no charge (normally £79.95 and £39.95 respectively) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Additional Courses suitable for Aesthetic Therapists:
Our popular Introduction to Phlebotomy Course also trains you to perform venepuncture at Advanced Level. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Advanced Level.
If you already have phlebotomy skills (or decide to enroll on our phlebotomy training course) then you will be able to offer your clients Platelet-Rich Plasma (PRP) Treatments, also known as Vampire Facials. Our PRP (Vampire Facials) Course trains you in the harvesting, preparation and treatment of PRP for application to your clients as required. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Foundation Degree Level.

If you would like to "mix and match" your training dates and/or locations or would like to build your own package of courses then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are dually accredited and are Skills for Health & WHO compliant.

Medical Aesthetics

Platelet-rich plasma (PRP)

Aesthetic Practitioner

Facial Aesthetics

THIS COURSE PACKAGE INCLUDES:
1: PERIPHERAL I.V. CANNULATION - IV THERAPIES COURSE (GPT008)
2: VACCINATION / INJECTION COURSE (GPT601)

Learn how to administer injectables and intravenous therapies ...

FAST-TRACK YOUR AESTHETICS TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% Multi-Course Discount

    Cover all stages from Level 1 through to Level 4 (FDSc)

    Cover your theory training online

    Complete your advanced practical training in 1 day

    Practical training in Classroom or Virtual Classroom

    Comprehensive Practise@Home training kits for VC

    Awards 2 accredited qualifications

    Dual Accreditations for all courses

    Covers all steps required to safely perform injectables

    Covers all steps required to safely perform IV therapies

    Practise IV on artificial arm with fake blood

    Practise injection techniques on realistic injection pads

    Learn beginner to advanced skills and techniques

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Aesthetic Therapy Training - Beginner to Advanced PACKAGE

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">This course is the next step on your Reiki journey if you would like to be able to use Reiki at a higher level and work with clients/family</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">This level 2 Reiki course is for you if you want to give Reiki healing at a more intense level or give healing treatments to others. Here you are introduced to the Reiki symbols for the first time</p><ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Cho Ku Rei (power symbol)</li><li fr-original-style="" style="box-sizing: border-box;">Sei He Ki (emotional symbol)</li><li fr-original-style="" style="box-sizing: border-box;">Hon Sha Ze Sho Nen (distance healing symbol)</li></ul><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What will I learn on this course:-</strong></p><ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">How to use the Reiki sacred symbols</li><li fr-original-style="" style="box-sizing: border-box;">What is Distance Healing and how to use the distance symbol so you can send Reiki healing to others.</li><li fr-original-style="" style="box-sizing: border-box;">Have increased level 2 Reiki energy</li><li fr-original-style="" style="box-sizing: border-box;">How to practice Self-Healing using the increased energy</li><li fr-original-style="" style="box-sizing: border-box;">Hand positions when healing others</li><li fr-original-style="" style="box-sizing: border-box;">The 21 day Cleansing Process explained</li><li fr-original-style="" style="box-sizing: border-box;">Professional Ethics</li><li fr-original-style="" style="box-sizing: border-box;">Question and answer session</li></ul><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">You will be initiated to the Reiki energy by a level 2 attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"> </p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">The course can be booked online here and you will receive instructions on how to access the course.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(111, 114, 135);">I look forward to meeting you and sharing my knowledge and experience of Reiki with you.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What this course offers you</strong></p><ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Individual Support - During and after your course</li><li fr-original-style="" style="box-sizing: border-box;">Practical Experience - Step by step training is given so that you can gain valuable experience using Reiki</li><li fr-original-style="" style="box-sizing: border-box;">Energy Perception &ndash; You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel</li><li fr-original-style="" style="box-sizing: border-box;">Personal Growth - You will discover for yourself the increased level of Reiki healing and be able to use its methods of healing on others and have paying clients if you wish&nbsp;</li></ul><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why a Level 2 Course?&nbsp;</strong>Reiki at Level 2 is the level of training which is needed to practise Reiki healing professionally and have paying clients. Often reflexologists, aromatherapists and other complementary therapists add reiki healing to their range of healing skills that they offer their clients.&nbsp;</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">However it is not just for those who have clients it is also a powerful self-development technique for your own personal healing experience and to share with family/friends and give them the benefit of well-being.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">A certificate at Reiki Level One is needed for you to enrol on this course and I am happy to accept students who have trained elsewhere with another Reiki Master.</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The Reiki Two course is taught live on line using Zoom.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Testimonials:- What other students who have attended my courses are saying&nbsp;</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Level Two Course</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">&ldquo;She explains everything so well and makes it easy to understand and connect to the reiki. This is my 2nd course I&rsquo;ve done with Margaret&rdquo; (Louise B).</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">"Thank you, I thoroughly enjoyed the course." (Beverley S)</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">This is a very well organized and informative course! (Georgie P)</p>

1948 Courses in Manchester

Combustion Engineering for Coal Fired Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Emotional Intelligence and Me (EI & Me)

By Lapd Solutions Ltd

Maintenance of Steam and Gas Turbines: Inspection, Diagnostic Testing, Troubleshooting, Maintenance, Overhaul and Refurbishment

By EnergyEdge - Training for a Sustainable Energy Future

Commissioning and Start-Up Activities of Coal Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Root Cause Analysis for Boilers and Steam Cycle Failures

By EnergyEdge - Training for a Sustainable Energy Future

Steam Turbine Technology

By EnergyEdge - Training for a Sustainable Energy Future

Gas Turbines, Co-Generation and Combined Cycle Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Industrial Instrumentation and Modern Control Systems

By EnergyEdge - Training for a Sustainable Energy Future

Electrical Generators, Excitation Systems and Governing Systems

By EnergyEdge - Training for a Sustainable Energy Future

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location