Name: Materials Management
Price: 2579 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of circulating fluidized bed (CFB) boiler coal power plants. The Commissioning Management System of CFB boiler coal power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report.</p>
<p>The course provides also a thorough understanding of all the commissioning requirements for CFB boiler and auxiliaries, turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear, and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a coal power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of CFB boiler coal power plant systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports.</p>
<p>This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any CFB boiler coal power plant equipment because it provides detailed pre-commissioning checks and detailed tests and commissioning procedures and instructions for every component in a CFB boiler coal power plant.</p>
<p>In addition, the course provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each CFB boiler coal power plant equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in CFB Boiler Coal Power Plants:</span></strong><span> Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in CFB boiler coal power plants</span></li>
<li><strong><span>Commissioning Management System of CFB Boiler Coal Power Plants:</span></strong><span> Discover the benefits of the Commissioning Management System of CFB boiler coal power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report</span></li>
<li><strong><span>Commissioning Procedures and Instructions for CFB Boiler and Auxiliaries in Coal Power Plants:</span></strong><span> Learn about the commissioning procedures and instructions for CFB boiler and auxiliaries including all commissioning activities, typical commissioning schedule, hydraulic test and wet preservation, air and gas tightness test, trial run of equipment, electronic precipitators, fuel oil system, preparation for first light up, alkali boil - out, acid cleaning and passivation, thermal flow test of economizer, water walls, and superheater, valves, steam boiling, and safety valve setting</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Turbine and Auxiliaries:</span></strong><span> Gain a thorough understanding of all the commissioning procedures and instructions for turbine and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Generator and Auxiliaries:</span></strong><span> Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Electrical Equipment: </span></strong><span>Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers, and motors</span></li>
<li><strong><span>CFB Boiler Coal Power Plant Equipment and Systems:</span></strong><span> Learn about various CFB boiler coal power plant equipment and systems including: CFB boilers, superheaters, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>CFB BOILER COAL POWER PLANT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component and system in CFB boiler coal power plants - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Commissioning and Start-Up Activities of Coal Power Plants

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2>About this training</h2>
<p>Mature fields differ from green field developments in that major infrastructure is in place, static reservoir data has accumulated from development drilling and a growing volume of production and processing performance data has become available. Decisions therefore relate to incremental projects, which may be small in scope and are often economically marginal. A firm understanding of the technical fundamentals associated with reservoir, wells and surface facilities is therefore required to make quality decisions in this environment, supported by realistic uncertainty ranges, and consistent application of incremental project economics and risk analysis. Various strategies may be considered to manage the mature asset, from harvest to divest, and the selected incremental activities should support a clear chosen strategy.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will be able to:</p>
<ul>
<li>Characterize the overall challenges associated with mature field developments</li>
<li>Evaluate critical insights from subsurface data and apply this to modelling options and recovery methods</li>
<li>Assess associated well data, typical late life issues and drilling and completion options for mature developments</li>
<li>Manage the role of risk and uncertainty when making mature field development planning decisions</li>
<li>Prepare a strategy and implementation plan</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The course is intended for individuals who play a part in evaluating, screening and maturing oil and gas field development opportunities. The following personnel will benefit from the knowledge shared in this course:</p>
<ul>
<li>Petroleum engineers</li>
<li>Geoscientist</li>
<li>Facilities engineers</li>
<li>Commercial staffs</li>
<li>Reservoir engineer</li>
<li>Production engineer</li>
<li>Drilling engineer</li>
<li>Project manager</li>
<li>Asset manager</li>
<li>Field engineer</li>
<li>Exploration manager</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader, boasts nearly four decades of experience in the upstream oil &amp; gas industry. He began his career in the back in 1982, spending 13 years with Shell International across several global locations. During his tenure, he served primarily as a reservoir engineer, contributing to exploration prospect evaluation, field development planning, corporate business planning, and drilling operations. Throughout his career, he has executed a diverse range of reservoir engineering projects for multiple UK and international firms, and has successfully led several PE study teams. Furthermore, he has continuously provided reservoir engineering and commercial training to oil company staff on a national and international scale.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Mature Field Development and Management

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>Artificial lift systems are an important part of production operations for the entire lifecycle of an asset. Often, oil and gas wells require artificial lift for most of the life cycle. This 5-day training course offers a thorough treatment of artificial lift techniques including design and operation for production optimization. With the increasing need to optimize dynamic production in highly constrained cost environments, opportunities and issues related to real-time measurements and optimization techniques needs to be discussed and understood. Artificial lift selection and life cycle analysis are covered. These concepts are discussed and reinforced using case studies, quizzing tools, and exercises with software. Participants solve examples and class problems throughout the course. Animations and videos reinforce the concepts under discussion.</p>
<p>Understanding of these important production concepts is a must have to exploit the existing assets profitably.</p>
<p><strong>Unique Features:</strong></p>
<ul>
<li>Hands-on usage of <strong>SNAP Software</strong> to solve gas-lift exercises</li>
<li>Discussion on <strong>digital oil field</strong></li>
<li><strong>Machine learning</strong> <strong>applications</strong> in gas-lift optimization</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>After the completion of this training course, participants will be able to:</p>
<ul>
<li>Understand the basics and advanced concepts of each form of artificial lift systems including application envelope, relative strengths, and weaknesses</li>
<li>Easily recognize the different components from downhole to the surface and their basic structural and operational features</li>
<li>Design and analyze different components using appropriate software tools</li>
<li>Understand challenges facing artificial lift applications and the mitigation of these challenges during selection, design, and operation</li>
<li>Learn about the role of digital oilfield tools and techniques and their applications in artificial lift and production optimization</li>
<li>Learn about use cases of Machine learning and artificial intelligence in the artificial lift</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This training course is suitable and will greatly benefit the following specific groups:</p>
<ul>
<li>Production, reservoir, completion, drilling and facilities engineers, analysts, and operators</li>
<li>Anyone interested in learning about selection, design, analysis and optimum operation of artificial lift and related production systems will benefit from this course.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
<li>Advanced</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.</span></p>
<p><em><span>Course Duration: 5 days in total (35 hours).</span></em></p>
<p><strong><span>Training Schedule</span></strong></p>
<p><span>0830 - Registration </span><span>0900 - Start of training </span><span>1030 - Morning Break </span><span>1045 - Training recommences </span><span>1230 - Lunch Break </span><span>1330 - Training recommences </span><span>1515 - Evening break </span><span>1530 - Training recommences </span><span>1700 - End of Training</span></p>
<p><span>The maximum number of participants allowed for this training course is 20.</span></p>
<p>This course is also available through our Virtual Instructor Led Training (VILT) format.</p>
<p><strong>Prerequisites:</strong></p>
<ul>
<li>Understanding of petroleum production concepts.</li>
<li>Each participant needs a laptop/PC for solving class examples using software to be provided during class. Laptop/PC needs to have a current Windows operating system and at least 500 MB free disk space. Participants should have administrator rights to install software.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has over 35 years' work-experience in multiphase flow, artificial lift, real-time production optimization and software development/management. His current work is focused on a variety of use cases like failure prediction, virtual flow rate determination, wellhead integrity surveillance, corrosion, equipment maintenance, DTS/DAS interpretation. He has worked for national oil companies, majors, independents, and service providers globally. He has multiple patents and has delivered a multitude of industry presentations. Twice selected as an SPE distinguished lecturer, he also volunteers on SPE committees. He holds a Bachelor's and Master's in chemical engineering from the Gujarat University and IIT-Kanpur, India; and a Ph.D. in Petroleum Engineering from the University of Tulsa, USA.</p>
<p><strong>Highlighted Work Experience: </strong></p>
<ul>
<li>At Weatherford, consulted with clients as well as directed teams on digital oilfield solutions including LOWIS - a solution that was underneath the production operations of Chevron and Occidental Petroleum across the globe.</li>
<li>Worked with and consulted on equipment's like field controllers, VSDs, downhole permanent gauges, multiphase flow meters, fibre optics-based measurements.</li>
<li>Shepherded an enterprise-class solution that is being deployed at a major oil and gas producer for production management including artificial lift optimization using real time data and deep-learning data analytics.</li>
<li>Developed a workshop on digital oilfield approaches for production engineers.</li>
</ul>
<p><strong>Patents:</strong></p>
<ul>
<li>Principal inventor: 'Smarter Slug Flow Conditioning and Control'</li>
<li>Co-inventor: 'Technique for Production Enhancement with Downhole Monitoring of Artificially Lifted Wells'</li>
<li>Co-inventor: 'Wellbore real-time monitoring and analysis of fracture contribution'</li>
</ul>
<p><strong>Worldwide Experience in Training / Seminar / Workshop Deliveries:</strong></p>
<ul>
<li>Besides delivering several SPE webinars, ALRDC and SPE trainings globally, he has taught artificial lift at Texas Tech, Missouri S&amp;T, Louisiana State, U of Southern California, and U of Houston.</li>
<li>He has conducted seminars, bespoke trainings / workshops globally for practicing professionals:
<ul>
<li><u>Companies:</u> Basra Oil Company, ConocoPhillips, Chevron, EcoPetrol, Equinor, KOC, ONGC, LukOil, PDO, PDVSA, PEMEX, Petronas, Repsol, , Saudi Aramco, Shell, Sonatrech, QP, Tatneft, YPF, and others.</li>
<li><u>Countries:</u> USA, Algeria, Argentina, Bahrain, Brazil, Canada, China, Croatia, Congo, Ghana, India, Indonesia, Iraq, Kazakhstan, Kenya, Kuwait, Libya, Malaysia, Oman, Mexico, Norway, Qatar, Romania, Russia, Serbia, Saudi Arabia, S Korea, Tanzania, Thailand, Tunisia, Turkmenistan, UAE, Ukraine, Uzbekistan, Venezuela.</li>
<li>Virtual training provided for PetroEdge, ALRDC, School of Mines, Repsol, UEP-Pakistan, and others since pandemic.</li>
</ul>
</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Artificial Lift and Real-Time Production Optimization in Digital Oilfield

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>Gas-lift is one of the predominant forms of artificial lift used for lifting liquids from conventional, unconventional, onshore and offshore assets. Gas-lift and its various forms (intermittent lift, gas-assisted plunger lift) allows life of well lift-possibilities when selected and applied properly. This 5-day training course is designed to give participants a thorough understanding of gas-lift technology and related application concepts.</p>
<p>This training course covers main components such as application envelope, relative strengths and weaknesses of gas-lift and its different forms like intermittent lift, gas-assisted plunger lift. Participants solve examples and class problems throughout the course. Animations and videos reinforce the concepts under discussion.</p>
<p><strong>Unique Features:</strong></p>
<ul>
<li>Hands-on usage of <strong>SNAP Software</strong> to solve gas-lift exercises</li>
<li>Discussion on <strong>digital oil field</strong></li>
<li><strong>Machine learning</strong> <strong>applications</strong> in gas-lift optimization</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>After the completion of this training course, participants will be able to:</p>
<ul>
<li>Understand the fundamental theories and procedures related to Gas-Lift operations</li>
<li>Easily recognize the different components of the gas-lift system and their basic structural and operational features</li>
<li>Be able to design a gas-lift installation</li>
<li>Comprehend how digital oilfield tools help address ESP challenges</li>
<li>Examine recent advances in real-time approaches to the production monitoring and lift management</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This training course is suitable and will greatly benefit the following specific groups:</p>
<ul>
<li>Production, reservoir, completion, drilling and facilities engineers, analysts, and operators</li>
<li>Anyone interested in learning about implications of gas-lift systems for their fields and reservoirs</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
<li>Advanced</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.</span></p>
<p><em><span>Course Duration: 5 days in total (35 hours).</span></em></p>
<p><strong><span>Training Schedule</span></strong></p>
<p><span>0830 - Registration </span><span>0900 - Start of training </span><span>1030 - Morning Break </span><span>1045 - Training recommences </span><span>1230 - Lunch Break </span><span>1330 - Training recommences </span><span>1515 - Evening break </span><span>1530 - Training recommences </span><span>1700 - End of Training</span></p>
<p><span>The maximum number of participants allowed for this training course is 20.</span></p>
<p>This course is also available through our Virtual Instructor Led Training (VILT) format.</p>
<p><strong>Prerequisites:</strong></p>
<ul>
<li>Understanding of petroleum production concepts.</li>
<li>Each participant needs a laptop/PC for solving class examples using software to be provided during class. Laptop/PC needs to have a current Windows operating system and at least 500 MB free disk space. Participants should have administrator rights to install software.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has over 35 years' work-experience in multiphase flow, artificial lift, real-time production optimization and software development/management. His current work is focused on a variety of use cases like failure prediction, virtual flow rate determination, wellhead integrity surveillance, corrosion, equipment maintenance, DTS/DAS interpretation. He has worked for national oil companies, majors, independents, and service providers globally. He has multiple patents and has delivered a multitude of industry presentations. Twice selected as an SPE distinguished lecturer, he also volunteers on SPE committees. He holds a Bachelor's and Master's in chemical engineering from the Gujarat University and IIT-Kanpur, India; and a Ph.D. in Petroleum Engineering from the University of Tulsa, USA.</p>
<p><strong>Highlighted Work Experience: </strong></p>
<ul>
<li>At Weatherford, consulted with clients as well as directed teams on digital oilfield solutions including LOWIS - a solution that was underneath the production operations of Chevron and Occidental Petroleum across the globe.</li>
<li>Worked with and consulted on equipment's like field controllers, VSDs, downhole permanent gauges, multiphase flow meters, fibre optics-based measurements.</li>
<li>Shepherded an enterprise-class solution that is being deployed at a major oil and gas producer for production management including artificial lift optimization using real time data and deep-learning data analytics.</li>
<li>Developed a workshop on digital oilfield approaches for production engineers.</li>
</ul>
<p><strong>Patents:</strong></p>
<ul>
<li>Principal inventor: 'Smarter Slug Flow Conditioning and Control'</li>
<li>Co-inventor: 'Technique for Production Enhancement with Downhole Monitoring of Artificially Lifted Wells'</li>
<li>Co-inventor: 'Wellbore real-time monitoring and analysis of fracture contribution'</li>
</ul>
<p><strong>Worldwide Experience in Training / Seminar / Workshop Deliveries:</strong></p>
<ul>
<li>Besides delivering several SPE webinars, ALRDC and SPE trainings globally, he has taught artificial lift at Texas Tech, Missouri S&amp;T, Louisiana State, U of Southern California, and U of Houston.</li>
<li>He has conducted seminars, bespoke trainings / workshops globally for practicing professionals:
<ul>
<li><u>Companies:</u> Basra Oil Company, ConocoPhillips, Chevron, EcoPetrol, Equinor, KOC, ONGC, LukOil, PDO, PDVSA, PEMEX, Petronas, Repsol, , Saudi Aramco, Shell, Sonatrech, QP, Tatneft, YPF, and others.</li>
<li><u>Countries:</u> USA, Algeria, Argentina, Bahrain, Brazil, Canada, China, Croatia, Congo, Ghana, India, Indonesia, Iraq, Kazakhstan, Kenya, Kuwait, Libya, Malaysia, Oman, Mexico, Norway, Qatar, Romania, Russia, Serbia, Saudi Arabia, S Korea, Tanzania, Thailand, Tunisia, Turkmenistan, UAE, Ukraine, Uzbekistan, Venezuela.</li>
<li>Virtual training provided for PetroEdge, ALRDC, School of Mines, Repsol, UEP-Pakistan, and others since pandemic.</li>
</ul>
</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Gas Lift Design & Optimization using NODAL Analysis

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p>Governments, regulators and energy companies are pursuing CO<sub>2</sub> storage technologies to meet their net-zero carbon commitments as well as targets set by the international Paris Agreement on climate change. For successfully executing Carbon Capture &amp; Storage (CCS) projects, various technical, operational, economic and environmental risks and associated stakeholders need to be managed.</p>
<p>In this <strong>5 half-day Virtual Instructor Led Training (VILT) course</strong>, the methods for managing risk in CCS projects are addressed <u>with a focus on CO<sub>2 </sub>injection and storage.</u> The VILT course will also demonstrate how to assess storage capacity of a potential CO<sub>2</sub> storage reservoir, model framing techniques, and well injectivity issues related to CO<sub>2</sub> injection. The potential leak paths will be discussed such as reservoir seals, leakage along faults and aspects of well integrity. In the VILT course, the design of a monitoring programme will also be discussed. The VILT course will be supported by various case studies.</p>
<p>This VILT course will cover the following modules:</p>
<ol>
<li>CCS projects in an international context</li>
<li>Site selection and site characterization</li>
<li>Storage capacity assessment</li>
<li>Injectivity assessment</li>
<li>Containment assessment</li>
<li>Measurement, monitoring &amp; verification</li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>On completion of this VILT course, participants will be able to:</p>
<ul>
<li>Uncover the functions and associated components required to capture, transport and store CO<sub>2</sub> in subsurface aquifers and (depleted) hydrocarbon reservoirs</li>
<li>Find a systematic and integrated approach to risk identification and assessment for CO<sub>2</sub> storage projects (maturation)</li>
<li>Appreciate the requirements (physics modelling) and uncertainties to assess the CO<sub>2</sub> storage capacity of a selected site.</li>
<li>Understand the challenges, data and methods to assess CO<sub>2</sub> well injectivity and well integrity</li>
<li>Identify the leakage pathways of a selected storage site, and understand the assessment methods and associated uncertainties</li>
<li>Learn how to design a monitoring program</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course is intended for all surface and subsurface engineers such as facility engineers, geologists, geophysicists, reservoir engineers, petrophysicists, production technologists/engineers, well engineers and geomechanical specialists. Also, (sub)surface team leads, project managers, business opportunity managers, decision executives, and technical risk assessment &amp; assurance specialists will benefit from this VILT course as it provides a common framework and workflow to develop a CCS project.</p>
<p><em><strong>For each class, it is highly recommended that a mix of disciplines mentioned above are represented to facilitate discussions from different perspectives.</strong></em></p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>This VILT course is built around cases in which teams work to identify and assess CO2 storage site issues using a systematic thought approach in this course. In addition, exercises are used to practise the aspects of the CCS risk assessment process. The VILT course provides a venue for discussion and sharing of good practices as well as opportunities to practise multi-discipline co-operation and facilitation.</p>
<p>Participants are encouraged to bring their own work issues and challenges and seek advice from the expert course leaders and other participants about all aspects of CCS.</p>
<p><strong>This VILT course will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 breaks of 10 minutes per day.</strong></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><strong>Trainer 1:</strong></p>
<p>Your expert course leader has more than 36 years of experience in the oil &amp; gas industry with Shell. He gained broad experience in petroleum engineering, with expertise in integrated production systems from subsurface, wells and surface. He has had assignments in Production Technology, R&amp;D, Production Chemistry, Rock Mechanics and Reservoir Engineering cEOR, with a proven track record in technology screening, development and deployment, field development planning, conceptual well design and Production System Optimization (PSO) of gas and oil fields as well as preparing Well, Reservoir &amp; Facility Management (WRFM) strategies and plans. He had also worked on assignments in NAM and did fieldwork in Oman, Gabon and Shell Nigeria. He is a skilled workshop facilitator. He discovered his passion for teaching following an assignment in Shell Learning. During his time in Shell, he developed and taught technical courses to Shell professionals via blended learning.</p>
<p><strong>Trainer 2:</strong></p>
<p>Your second expert course leader has over 30 years of experience identifying, assessing and mitigating technical risks with Shell. The main focal point of his experience is in subsurface and Geomechanical risks. He is the the founding father of various innovations in how we assess risks by tool development (for bore hole stability, 3D geomechanical field evaluations and probabilistic assessment). He also developed an eye for people motivation, change management and facilitation. He was also responsible for the Geomechanical competence framework, and associated virtual and classroom training programme in Shell for 10 years.</p>
<p><strong>Trainer 3:</strong></p>
<p>Your third expert course leader has more than 30 years of experience in Shell, focusing on research and development in drilling and offshore systems. His areas of expertise is in project management, finance, business planning, investment, development studies and economics models. In 2021, he worked on a project that looked into the economic evaluation of P18A field complex for CO<sub>2</sub> storage. He has an MSc in Mechanical Engineering (M.E.) TU Delft Netherlands (Hons) and a baccalaureate from Erasmus University Rotterdam.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Carbon Capture and Storage (CCS): Project Risks & How to Manage Them

<div>
</div>
<section>
<div>
<h2><strong>About this Course</strong></h2>
<p>This 5 full-day course presents the most modern statistical and mathematical forecasting frameworks used by practitioners to tackle the load forecasting problem across short time and long time scales. The course presents practical applications to solving forecasting challenges, supported by real life examples from large control areas. It presents the weather impacts on the load forecasts and the methodologies employed to quantify the weather effect and building a repository of weather normal data.</p>
<p>A good load forecast methodology must improve its forecasting accuracy and support a consistent load forecasting process. The load forecasting widely used in the power industry has evolved significantly with the advancement and adoption of Artificial Intelligence techniques such as Machine Learning.</p>
<p>With the increased penetration of inverter-based resources, the operation of electric grids grew in complexity, leading to load forecasts that are updated more frequently than once a day. Furthermore, several jurisdictions adopted a smaller granularity than the hourly load forecasts in the effort to reduce the forecasting uncertainties.</p>
<p>On the generation side, fuel forecasting professionals must meet energy requirements while making allowance for the uncertainty on both the demand and the supply side.</p>
<p>This training course will also feature a guest speaker, who is a Ph.D candidate to provide insights into the most modern aspects of Artificial Intelligence in the context of load forecasting.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><span>This course offers a comprehensive approach to all aspects of load forecasting:</span></p>
<ul>
<li><span>Gain a perspective of load forecasting from both operators in the generating plant and system operators.</span></li>
<li><span>Understand and review the advanced load forecasting concepts and forecasting methodologies</span></li>
<li><span>Learn the application of Artificial Neural Networks and Probabilistic Forecasting methods to manage forecasting uncertainties in short time frames</span></li>
<li><span>Appreciate market segmentation and econometric framework for long term forecasts</span></li>
<li><span>Find out the most recent practical application of load forecasting as examples from large power companies</span></li>
<li><span>Get access to recent industry reports and developments</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Energy load forecasting professionals from power plant and system operators</span></li>
<li><span>Energy planners and energy outlook forecasters and plant operators</span></li>
<li><span>Fuel procurement professionals</span></li>
<li><span>Planners and schedulers of thermal generating units</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><span>Your expert course instructor is a Utility Executive with extensive global experience in power system operation and planning, energy markets, enterprise risk and regulatory oversight. She consults on energy markets integrating renewable resources from planning to operation. She led complex projects in operations and conducted long term planning studies to support planning and operational reliability standards. Specializing in Smart Grids, Operational flexibilities, Renewable generation, Reliability, Financial Engineering, Energy Markets and Power System Integration, she was recently engaged by the Inter-American Development Bank/MHI in Guyana. She was the Operations Expert in the regulatory assessment in Oman. She is a registered member of the Professional Engineers of Ontario, Canada. She is also a contributing member to the IEEE Standards Association, WG Blockchain P2418.5.</span></p>
<p><span>With over 25 years with Ontario Power Generation (Revenue $1.2 Billion CAD, I/S 16 GW), she served as Canadian representative in CIGRE, committee member in NSERC (Natural Sciences and Engineering Research Council of Canada), and Senior Member IEEE and Elsevier since the 90ties. Our key expert chaired international conferences, lectured on several continents, published a book on Reliability and Security of Nuclear Power Plants, contributed to IEEE and PMAPS and published in the Ontario Journal for Public Policy, Canada. She delivered seminars organized by the Power Engineering Society, IEEE plus seminars to power companies worldwide, including Oman, Thailand, Saudi Arabia, Malaysia, Indonesia, Portugal, South Africa, Japan, Romania, and Guyana.</span></p>
<p><span>Our Key expert delivered over 60 specialized seminars to executives and engineers from Canada, Europe, South and North America, Middle East, South East Asia and Japan. Few examples are:</span></p>
<ul>
<li><span>Modern Power System in Digital Utilities - The Energy Commission, Malaysia and utilities in the Middle East, GCCIA, June 2020</span></li>
<li><span>Assessment of OETC Control Centre, Oman, December 2019</span></li>
<li><span>Demand Side management, Load Forecasting in a Smart Grid, Oman, 2019</span></li>
<li><span>Renewable Resources in a Smart Grid (Malaysia, Thailand, Indonesia, GCCIA, Saudi Arabia)</span></li>
<li><span>The Modern Power System: Impact of the Power Electronics on the Power System</span></li>
<li><span>The Digital Utility, AI and Blockchain</span></li>
<li><span>Smart Grid and Reliability of Distribution Systems, Cyme, Montreal, Canada</span></li>
<li><span>Economic Dispatch in the context of an Energy Market (TNB, Sarawak Energy, Malaysia)</span></li>
<li><span>Energy Markets, Risk Assessment and Financial Management, PES, IEEE: Chicago, San Francisco, New York, Portugal, South Africa, Japan. Provided training at CEO and CRO level.</span></li>
<li><span>Enterprise Risk methodology, EDP, Portugal</span></li>
<li><span>Energy Markets: Saudi Electricity Company, Tenaga National Berhad, Malaysia</span></li>
<li><span>Reliability Centre Maintenance (South East Asia, Saudi Electricity Company, KSA)</span></li>
<li><span>EUSN, ENERGY &amp; UTILITIES SECTOR NETWORK, Government of Canada, 2016</span></li>
<li><span>Connected+, IOT, Toronto, Canada September 2016 and 2015</span></li>
<li><span>Smart Grid, Smart Home HomeConnect, Toronto, Canada November 2014</span></li>
<li><span>Wind Power: a Cautionary Tale, Ontario Centre for Public Policy, 2010</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Advanced Load Forecasting & Methodology

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course provide a comprehensive understanding of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, HART protocol, control valves, actuators, and smart technology. This course will focus on maximizing the efficiency, reliability, and longevity of these systems and equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p>
<p>This course is a MUST for anyone who is involved in the selection, applications, or maintenance of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology because it covers how these systems and equipment operate, the latest maintenance techniques, and provides guidelines and rules that ensure their successful operation. In addition, this course will cover in detail the basic design, operating characteristics, specification, selection criteria, advanced fault detection techniques, critical components and all preventive and predictive maintenance methods in order to increase the reliability of these systems andequipment and reduce their operation and maintenance cost</p>
<p>This course will provide the following information for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology:</p>
<ul>
<li>Basic Design</li>
<li>Specification</li>
<li>Selection Criteria</li>
<li>Sizing Calculations</li>
<li>Enclosures and Sealing Arrangements</li>
<li>Codes and Standards</li>
<li>Common Operational Problems</li>
<li>All Diagnostics, Troubleshooting, Testing, and Maintenance</li>
</ul>
<p>Practical applications of smart instrumentation, SCADA, and Distributed Control Systems, control valves, actuators, etc in the following industries will be discussed in detail:</p>
<ul>
<li>Chemical and petrochemical</li>
<li>Power generation</li>
<li>Pulp and paper</li>
<li>Aerospace</li>
<li>Water and sewage treatment</li>
<li>Electrical power grids</li>
<li>Environmental monitoring and control systems</li>
<li>Pharmaceutical plants</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Equipment Operation: </span></strong><span>Gain a thorough understanding of the operating characteristics of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Diagnostics and Inspection:</span></strong><span> Learn in detail all the diagnostic techniques and inspections required of critical components of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Testing:</span></strong><span> Understand thoroughly all the tests required for the various types of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Maintenance and Troubleshooting: </span></strong><span>Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Repair and Refurbishment:</span></strong><span> Gain a detailed understanding of the various methods used to repair and refurbish modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Efficiency, Reliability, and Longevity: </span></strong><span>Learn the various methods used to maximize the efficiency, reliability, and longevity of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Sizing:</span></strong><span> Gain a detailed understanding of all the calculations and sizing techniques used for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Design Features:</span></strong><span> Understand all the design features that improve the efficiency and reliability of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Selection:</span></strong><span> Learn how to select modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology by using the performance characteristics and selection criteria that you will learn in this course</span></li>
<li><span><strong>Equipment Enclosures and Sealing</strong> Methods </span><span>Learn about the various types of enclosures and sealing arrangements used for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Commissioning:</span></strong><span> Understand all the commissioning requirements for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Codes and Standards:</span></strong><span> Learn all the codes and standards applicable for modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>Equipment Causes and Modes of Failure:</span></strong><span> Understand the causes and modes of failure of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
<li><strong><span>System Design: </span></strong><span>Learn all the requirements for designing different types of modern control systems, digital control, distributed control systems (DCSs), supervisory control and data acquisition (SCADA) systems, industrial instrumentation, control valves, actuators, and smart technology</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Industrial Instrumentation and Modern Control Systems Practical Manual (400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Industrial Instrumentation and Modern Control Systems

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p>Hydrogen will play an increasingly critical role in the future of energy system as it moves forward to supplement and potentially replace fossil fuels in the long run. Offshore wind offers a clean and sustainable renewable resource for green hydrogen production. However, it can also be volatile and presents inherent risks that need to be managed. Even though offshore production of hydrogen has yet to achieve a high state of maturity, many current projects are already dealing with the conditions and effects of offshore production of hydrogen and are grappling with the technological requirements and necessary gas transportation with grid integration.</p>
<p>This 2 half-day Virtual Instructor Lead Training (VILT) course will examine the technological options for on-site production of hydrogen by electrolysis (onshore or offshore directly at the platform) as well as the transport of hydrogen (pipeline or ship). This VILT course will also explore the economic considerations and the outlook on future market opportunities. <span>There will be exercises for the participants to work on over the two half-days.</span></p>
<p>This course is delivered in partnership with Fraunhofer IEE.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><span>By the end of this VILT course, participants will be able to:</span></p>
<ul>
<li><span>Understand the technological attributes and options for green hydrogen production based on electricity from offshore wind.</span></li>
<li><span>Explore the associated economic analysis for offshore wind hydrogen production, including CAPEX, OPEX, LCOE and LCOH</span></li>
<li><span>Identify the critical infrastructure and technical configuration required for offshore green hydrogen including transportation networks and grid connectivity</span></li>
<li><span>Learn from recent findings from current Research &amp; Development projects concerning the differences</span> <span>between onshore and offshore hydrogen production.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p><span>This VILT course is intended:</span></p>
<ul>
<li><span>Renewable energy developers and operators</span></li>
<li><span>Offshore oil &amp; gas operators</span></li>
<li><span>Energy transport and marine operators</span></li>
<li><span>Energy policy makers and regulators</span></li>
<li><span>IPPs and power utilities</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The VILT course will be delivered online in <strong>2 half-day sessions comprising 4 hours per day</strong>, including time for lectures, discussion, quizzes and short classroom exercises.</span></p>
<p>Course Duration: 2 half-day sessions, 4 hours per session (8 hours in total).</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><strong>Trainer 1:</strong></p>
<p>Your expert course leader is Director of Energy Process Technology Division at the Fraunhofer Institute for Energy Economics and Energy System Technology, IEE. The research activities of the division link the areas of energy conversion processes and control engineering. The application fields covered are renewable energy technologies, energy storage systems and power to gas with a strong focus on green hydrogen. From 2006 - 2007, he worked as a research analyst of the German Advisory Council on Global Change, WBGU, Berlin. He has extensive training experience from Bachelor and Master courses at different universities as well as in the context of international training activities - recently on hydrogen and PtX for partners in the MENA region and South America. He holds a University degree (Diploma) in Physics, University of Karlsruhe (KIT).</p>
<p><strong>Trainer 2:</strong></p>
<p><span>Your expert course leader is Deputy Head of Energy Storage Department at Fraunhofer IEE. Prior to this, he was the director of the Grid Integration Department at SMA Solar Technology AG, one of the world's largest manufacturers of PV power converters. Before joining SMA, he was manager of the Front Office System Planning at Amprion GmbH (formerly RWE TSO), one of the four German transmission system operators. He holds a Degree of Electrical Engineering from the University of Kassel, Germany. In 2003, he finished his Ph.D. (Dr.-Ing.) on the topic of wind power forecasting at the Institute of Solar Energy Supply Technology (now known as Fraunhofer IEE) in Kassel. In 2004, he started his career at RWE TSO with a main focus on wind power integration and congestion management. He</span> <span>is Chairman of the IEC SC 8A 'Grid Integration of Large-capacity Renewable Energy (RE) Generation' and has published several papers about grid integration of renewable energy source and forecasting systems on books, magazines, international conferences and workshops.</span></p>
<p><strong>Trainer 3:</strong></p>
<p><span>Your expert course leader is Deputy Director of the Energy Process Technology division and Head of the Renewable Gases and Bio Energy Department at Fraunhofer IEE. His work is mainly focused on the integration of renewable gases and bioenergy systems into the energy supply structures. He has been working in this field since more than 20 years. He is a university lecturer in national and international master courses. He is member of the scientific advisory council of the European Biogas Association, member of the steering committee of the Association for Technology and Structures in Agriculture, member of the International Advisory Committee (ISAC) of the European Biomass Conference and member of the scientific committees of national bioenergy conferences. He studied mechanical engineering at the University of Darmstadt, Germany. He received his Doctoral degree on the topic of aerothermodynamics of gas turbine combustion chambers. He started his career in renewable energies in 2001, with the topic of biogas fired micro gas turbines.</span></p>
<p><strong>Trainer 4:</strong></p>
<p><span>Your expert course leader has an M. Sc. and she joined Fraunhofer IEE in 2018. In the Division of Energy Process Technology, she is currently working as a Research Associate on various projects related to techno-economic analysis of international PtX projects and advises KfW Development Bank on PtX projects in North Africa. Her focus is on the calculation of electricity, hydrogen and derivative production costs (LCOE, LCOH, LCOA, etc) based on various methods of dynamic investment costing. She also supervises the development of models that simulate different PtX plant configurations to analyze the influence of different parameters on the cost of the final product, and to find the configuration that gives the lowest production cost. She received her Bachelor's degree in Industrial Engineering at the HAWK in GÃ¶ttingen and her Master's degree in renewable energy and energy efficiency at the University of Kassel.</span></p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Green Hydrogen Production from Offshore Wind

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This course will provide detailed learning to the various aspects of the design, analysis and operation of subsea control systems for a variety of field development options to allow effective management of subsea facilities either from offshore structures or from shore bases.  This will include power and telemetry focussing on electrical, hydraulic and electro-hydraulic systems, shut down systems, and application of intelligent monitoring and 'smart' fields.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><strong>By attending this course, participants will be able to:</strong></p>
<ul>
<li>To provide detailed knowledge and understanding of the requirements for, and design of, subsea electrical, electro-hydraulic, hydraulic and programmable control systems.</li>
<li>Knowledge of the components and uses of a wide variety of subsea control systems the requirements for and design implications, of umbilicals and control lines (power and telemetry)</li>
<li>Knowledge of, and ability to model, power requirements subsea and detailed understanding of the requirements and objectives of pre-commissioning, both at the factory and in situ.</li>
<li>Knowledge of the standards involved in design of equipment, control and application of manual and automatic shut-down valves, and emergency response systems</li>
<li>Introduction to design of redundancy and the role of spare capacity and to be able to put this knowledge to effect to contribute to detailed field design.</li>
<li>An understanding of obsolescence management in subsea control systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is intended for Offshore and Onshore Subsea Production Control Systems; Engineers, Technicians, Supervisors, Operators; Graduates; Apprentices; transfers from other industries, and existing staff with a limited exposure to Production Control and a need to understand the more technical aspects of the system.</p>
<p>Companies not directly involved in the day-to-day support of the industry, but occasionally involved in supplying and supporting operators; manufacturers and suppliers of Oil and Gas equipment and services may also find this a useful course to understand how their equipment and technical expertise is integrated into the Offshore system.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>For most of his working life, your expert course leader has been in a role that has enabled him to pass on skills and knowledge to others. A full-time role in Training and Development came about in 1996 with the offer to take up a full-time teaching post at Aberdeen College. In 1998, he was recruited by Kvaerner Oilfield Products, an Oil &amp; Gas industry company, specialising in Subsea Control Systems, to develop and implement a Training &amp; Competence program acceptable for its staff of over 600 and their client companies - a challenge he could not resist. In 2003, he broadened his horizons and became an independent Training &amp; Development consultant. Building a reputation for delivering training and development to the Oil &amp; Gas industry to the highest standards, he later joined Jee Ltd, a leading subsea engineering and training company based in Aberdeen. He was tasked with a wide portfolio of training, coaching &amp; mentoring to achieve high levels of competence for the client's staff and customers. He is also a Science and Engineering Ambassador (Scotland), promoting the need for engineers and technicians for Scotland's industries, a frequent consultant to the European Economic &amp; Social Committee for standardising Vocational Skills training and competence throughout the EU. He holds memberships in the Society of Operations Engineers, Chartered Institute of Personnel &amp; Development and Society of Underwater Technologies.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Subsea Control Systems & Umbilicals

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Materials Management is an essential link in the Supply Chain process. It takes an even bigger significance in the Upstream industry when the cost of a rupture in equipment or stock can be tremendous, without even considering the cost of the equipment itself. The downside may result in the accumulation of out-of-commission materials which leads to business inefficiency. What does it take to maintain efficient Materials Management? This 3 full-day course will explain more in detail.</p>
<p>This course can also be offered through Virtual Instructor Led Training (VILT) format.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>At the end of this course, participants will be able to:</p>
<ul>
<li>Understand the importance of an efficient Materials Management in the Supply Chain process</li>
<li>Examine the control and validation of Stock processes</li>
<li>Understand the role of the Duet and work within the Stock Duet in materials management</li>
<li>Learn about the key factors in Stock optimisation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course will benefit <strong>all personnel involved in Supply Chain including Stock Controllers, Cost Controllers, Buyers, Logisticians and those from the technical department such as Technical Administrators and members of the duet.</strong></p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has 25 years of experience in management positions in Contracting, Procurement and Logistics, mainly in the Oil &amp; Gas Industry. He was a Lecturer for IFP Training for 5 years. During his Oil &amp; Gas industry experience, he has worked on major Oil and Gas development projects like the Yadana project in Myanmar, Akpo project in Nigeria and YLNG in Yemen. His international experience allows him to adapt very easily and integrate the multicultural specificities of the Oil &amp; Gas industry in his teaching.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Materials Management

Bournemouth

London Waterloo Academy

Dental Nurse

Dental Assistant

VIRTUAL DENTAL NURSING DIPLOMA

Registration Fee

Tuition Fee

Exam Fee

One Day Introduction Course

Southend on Sea

Rotherham

Manchester

Slough

Portsmouth

Bingley

Nottingham

Paisley

Birmingham

Luton

Northampton

Bedford

Liverpool 

Swansea

BASIC to ADVANCED COURSE PACKAGE

Complete 3 courses over 2 full days and receive three qualifications:

Introduction to Phlebotomy Certificate (Nationally Recognised Level 3, Ireland Level 5)
Days 1 and 2: 9.30am – 5.00pm

Advanced Phlebotomy Certificate (Nationally Recognised Level 4, Ireland Level 6)
Day 1: 5.30pm - 8.30pm

Geopace Certificate of Competency (Nationally Recognised Accredited, CPD Practical Skills)
Day 2: 5.30pm - 8.30pm

Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.






Key Facts & Summary:


COURSE 1: INTRODUCTION TO PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Three (Ireland Level Five)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (21 CPD Points)

PART 1 (DAY 1) - 9.30am to 5.00pm
PART 2 (DAY 2) - 9.30am to 5.00pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

A TWO DAY venepuncture course at Level 3. Trains up to the point of live blood draws.

On completion awards a Nationally Recognised and Accredited Certificate in Phlebotomy.

DAY ONE (PART 1) - THEORY
Attend the course location of your choice – starts at 9.30am and finishes approx. 5.00pm

DAY TWO (PART 2) - CLASSROOM
Your classroom tutor will recap on the theory element (above) after which you will begin your practical sessions learning and developing the skills required up to the point of Live Blood Draws.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 2: ADVANCED PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Four (Ireland Level 6)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (14 CPD Points)

PART 1 - THEORY
Complete your theory training online in the comfort of your own home or at work.

PART 2 - CLASSROOM
Follow on from your Day One Theory training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.

On completion awards a Nationally Recognised and Accredited Certificate in Advanced Phlebotomy.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 3: ROUTE TO COMPETENCY MASTERCLASS
CPD ACCREDITED - The CPD Certification Service

CLASSROOM
Follow on from your Day Two practical training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

GEOPACE LIVE BLOOD SESSIONS enabling you to draw human blood under 1-to-1 supervision of your tutor. You will follow a Competency Checklist, signed off by your tutor on completion.

On completion awards a Geopace Certificate of Competency - Nationally Recognised and Accredited Route to Competency - Live Blood Draws Certificate

DOWNLOAD A COURSE ITINERARY HERE




How do I attend?

EITHER -
CLASSROOM OPTION - Attend one of our scheduled classroom locations, completing your Introduction to Phlebotomy Course over 2 days. You will also complete your Advanced Training at the end of the first day and your Competency Training at the end of the second day.

Our Introduction to Phlebotomy and Advanced Phlebotomy Training Kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available to add at time of booking. Our comprehensive training kits each mirror the same equipment and supplies used in the classroom and both include detailed video tutorials, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for a one day Zoom session to complete your Introduction to Phlebotomy virtual classroom training, followed by your Advanced Training in the evening of the same day. You have the option to add a classroom-based competency session, awarding a CPD Accredited Geopace Certificate of Competency, at time of booking.

Our Virtual Classroom option includes two very comprehensive training kits - one for your introductory course and one for your advanced course. Kits are included at no charge (normally £79.95 each) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Please note - Competency Training
Our Route to Competency Masterclass - Live Blood Sessions can only be completed in a classroom environment. This is included when you book a classroom option. When booking the virtual classroom option you can choose to add this at time of booking. You will receive a voucher code to enable you to book onto any upcoming dates or locations. For most of our two day course we run our competency training at the end of the second day and therefore you should be able to complete your full training programme with us over two days.

If you are completing your training by virtual classroom please see our list of competency training locations here.

If you would like to "mix and match" your training dates and/or locations then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are accredited and are Skills for Health & WHO compliant.

Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

THIS COURSE PACKAGE INCLUDES:
1: INTRODUCTION TO PHLEBOTOMY COURSE (GPT003) - Level 3 (Ireland Level 5)
2: ADVANCED PHLEBOTOMY COURSE (GPT005) - Level 4 (Ireland Level 6)
3: GEOPACE COMPETENCY CERTIFICATE - CPD Certified (optional with Virtual Classroom)

Learn how to take blood ... train as a Phlebotomist

FAST-TRACK YOUR PHLEBOTOMY TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% off -  Multi-Course Discount

    Cover all stages from beginner through to Level 4

    Available as Classroom or Virtual Classroom

    Complete your beginner to advanced training in 2 days

    Awards 2 accredited qualifications - Introduction to Phlebotomy and Advanced Phlebotomy qualifications

    Both courses are dually accredited (OCN & CPD)

    Geopace Certificate of Competency included with classroom attendance or available as an option when booking virtual classroom

    Covers all steps up to live blood draw

    Learn advanced skills and techniques

    Virtual Classroom options include comprehensive Practise@Home Training Kits (yours to keep)

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Phlebotomy Training - Beginner to Advanced PACKAGE

General Admission

Burnley

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Have you ever wondered what is Reiki and would like to know more, then this course is for you if you would like to learn more about Reiki</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">This Reiki Level One course is for you if you have heard a lot about Reiki and are interested in learning more about Reiki and is an introductory course on how to use Reiki healing techniques.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">This is where you begin and my online course will teach you all you need to know to get you started with using Reiki on yourself and it is very simple to learn and to use. It is a gentle hands-on healing technique, which uses healing energy to treat any physical or emotional concerns.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Reiki is a helpful self-development technique for anyone wanting to learn more about reiki and how to enjoy the benefits of a healing treatment.</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The Reiki One course is taught live on line using Zoom.</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What will I learn on this course:-</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">What is Reiki and its history?</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">The Principles of Reiki</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Auras and chakras</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Preparation for your initiation to the Reiki energy or attunement</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">What does the Reiki energy feel like?</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">21 day cleansing process</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">How to practise self-healing on yourself</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Reiki and its uses with other therapies</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Your own Reiki Lineage</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Question and answer session&nbsp;</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">You will be initiated to the Reiki energy by an attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">The course can be booked online here and you will receive instructions on how to access the course.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(111, 114, 135);">I look forward to meeting you and sharing my knowledge and experience of Reiki with you.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What this course offers you:</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Individual Support &ndash; During and after your course, if you have any questions</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Practical Experience &ndash; Step by step training is given so that you can gain valuable experience using Reiki on yourself</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Energy Perception &ndash; You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Personal Growth &ndash; You will discover for yourself the gift of Reiki healing and have increased confidence to use it for self-healing</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Testimonials:- What other students who have attended my courses are saying &nbsp;</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Level One Course</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">&ldquo;I enjoyed this course and Margaret is a great teacher and her calming voice explains everything clearly&rdquo;. (Anne-Marie M)</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">&ldquo;This is a very informative course. It gave me everything I needed to know to start working with the Reiki energy. (Sally R.)</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">&ldquo;This course is excellent!&rdquo; (Phil T)</p>

Margaret Cook - Learn More About Reiki

Energy Healing

Reiki

Reiki Healer

I am a Reiki Teacher in Manchester and one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course. I teach all three levels of Reiki courses, level 1 reiki. level 2 reiki and reiki master level 3

Reiki Level One Online Course - New to Reiki this is for you

Key Facts:


COURSE 1: PERIPHERAL I.V. CANNULATION COURSE (GPT008)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.

 
Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)
Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.





Key Facts:


COURSE 2: VACCINATION / INJECTION COURSE (GPT601)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)


Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (FDSc Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)



SUITABLE FOR:
- MEDICAL / HEALTHCARE (trainees and professionals)
- AESTHETIC THERAPISTS (all levels)

 
This Vaccination / Injection Course is a nurse or paramedic-led half-day session covering all essential theory and practical skill-sets required to deliver effective Intramuscular, Intradermal and Subcutaneous injections / vaccinations.
 
PART 1 - THEORY (online)
Delegates will fully understand the theory and will be able to demonstrate they can identify the correct patient, gain consent and safely administer a vaccine or injection, conforming to WHO and Skills for Health recommended standards.
 
Itinerary:
M01 Course Overview and brief history
M02 Infection Protection Control
M03 Professionalism and Effective Communication
M04 Understanding injection procedures
M05 Why do we vaccinate?
M06 The immune system and how vaccines work. Vaccine types and composition.
M07 The National Vaccine Policy & Schedule
M08 Vaccine preventable diseases
M08A – Covid-19 Update
M09 Vaccines - understanding the reconstitution process
M10 Storage and Handling – understanding correct procedures and protocols
M11 Equipment – Syringes and Syringe Types, Needles and Needle Types, SDV (Single-Dose Vials), MDV (Multi-Dose Vials), Pre-Filled Syringes, Gloves and PPE.
M12 Vaccination sites, techniques and anatomical site selection
i) Intramuscular (IM) Injection
ii) Subcutaneous (SubCut) Injection
iii) Intradermal (ID) Injection
M13 Legal requirements, Consent and Standard Operating Procedures
M14 Adverse Reactions and Basic Life Support Guidance
M15 Record keeping & Documentation
 
PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING
PART 2 - CLASSROOM (am, pm or evening sessions)
3 - 4 hours skill-set development with practical demonstrations and hands-on experience performing Intramuscular, Intradermal and Subcutaneous Injections.
 


How do I attend?

EITHER -
CLASSROOM OPTION - Complete your theory training online at home or work, then attend one of our scheduled classroom locations, completing your Peripheral IV Cannulation Course and your Injection Course on the same day.
Our Peripheral IV Cannulation Course and Injection Course training kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available for you to add at time of booking. Training kits mirror the same equipment and supplies used in the classroom and both include detailed video instructions, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for your one full day to complete your cannulation and injection course training.

Our Virtual Classroom option includes two very comprehensive training kits - one for your cannulation course and one for your injection course. Kits are included at no charge (normally £79.95 and £39.95 respectively) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Additional Courses suitable for Aesthetic Therapists:
Our popular Introduction to Phlebotomy Course also trains you to perform venepuncture at Advanced Level. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Advanced Level.
If you already have phlebotomy skills (or decide to enroll on our phlebotomy training course) then you will be able to offer your clients Platelet-Rich Plasma (PRP) Treatments, also known as Vampire Facials. Our PRP (Vampire Facials) Course trains you in the harvesting, preparation and treatment of PRP for application to your clients as required. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Foundation Degree Level.

If you would like to "mix and match" your training dates and/or locations or would like to build your own package of courses then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are dually accredited and are Skills for Health & WHO compliant.

Medical Aesthetics

Platelet-rich plasma (PRP)

Intravenous Cannulation

Aesthetic Practitioner

Facial Aesthetics

THIS COURSE PACKAGE INCLUDES:
1: PERIPHERAL I.V. CANNULATION - IV THERAPIES COURSE (GPT008)
2: VACCINATION / INJECTION COURSE (GPT601)

Learn how to administer injectables and intravenous therapies ...

FAST-TRACK YOUR AESTHETICS TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% Multi-Course Discount

    Cover all stages from Level 1 through to Level 4 (FDSc)

    Cover your theory training online

    Complete your advanced practical training in 1 day

    Practical training in Classroom or Virtual Classroom

    Comprehensive Practise@Home training kits for VC

    Awards 2 accredited qualifications

    Dual Accreditations for all courses

    Covers all steps required to safely perform injectables

    Covers all steps required to safely perform IV therapies

    Practise IV on artificial arm with fake blood

    Practise injection techniques on realistic injection pads

    Learn beginner to advanced skills and techniques

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Aesthetic Therapy Training - Beginner to Advanced PACKAGE

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">This course is the next step on your Reiki journey if you would like to be able to use Reiki at a higher level and work with clients/family</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">This level 2 Reiki course is for you if you want to give Reiki healing at a more intense level or give healing treatments to others. Here you are introduced to the Reiki symbols for the first time</p><ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Cho Ku Rei (power symbol)</li><li fr-original-style="" style="box-sizing: border-box;">Sei He Ki (emotional symbol)</li><li fr-original-style="" style="box-sizing: border-box;">Hon Sha Ze Sho Nen (distance healing symbol)</li></ul><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What will I learn on this course:-</strong></p><ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">How to use the Reiki sacred symbols</li><li fr-original-style="" style="box-sizing: border-box;">What is Distance Healing and how to use the distance symbol so you can send Reiki healing to others.</li><li fr-original-style="" style="box-sizing: border-box;">Have increased level 2 Reiki energy</li><li fr-original-style="" style="box-sizing: border-box;">How to practice Self-Healing using the increased energy</li><li fr-original-style="" style="box-sizing: border-box;">Hand positions when healing others</li><li fr-original-style="" style="box-sizing: border-box;">The 21 day Cleansing Process explained</li><li fr-original-style="" style="box-sizing: border-box;">Professional Ethics</li><li fr-original-style="" style="box-sizing: border-box;">Question and answer session</li></ul><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">You will be initiated to the Reiki energy by a level 2 attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"> </p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">The course can be booked online here and you will receive instructions on how to access the course.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(111, 114, 135);">I look forward to meeting you and sharing my knowledge and experience of Reiki with you.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What this course offers you</strong></p><ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Individual Support - During and after your course</li><li fr-original-style="" style="box-sizing: border-box;">Practical Experience - Step by step training is given so that you can gain valuable experience using Reiki</li><li fr-original-style="" style="box-sizing: border-box;">Energy Perception &ndash; You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel</li><li fr-original-style="" style="box-sizing: border-box;">Personal Growth - You will discover for yourself the increased level of Reiki healing and be able to use its methods of healing on others and have paying clients if you wish&nbsp;</li></ul><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why a Level 2 Course?&nbsp;</strong>Reiki at Level 2 is the level of training which is needed to practise Reiki healing professionally and have paying clients. Often reflexologists, aromatherapists and other complementary therapists add reiki healing to their range of healing skills that they offer their clients.&nbsp;</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">However it is not just for those who have clients it is also a powerful self-development technique for your own personal healing experience and to share with family/friends and give them the benefit of well-being.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">A certificate at Reiki Level One is needed for you to enrol on this course and I am happy to accept students who have trained elsewhere with another Reiki Master.</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The Reiki Two course is taught live on line using Zoom.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Testimonials:- What other students who have attended my courses are saying&nbsp;</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Level Two Course</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">&ldquo;She explains everything so well and makes it easy to understand and connect to the reiki. This is my 2nd course I&rsquo;ve done with Margaret&rdquo; (Louise B).</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">"Thank you, I thoroughly enjoyed the course." (Beverley S)</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">This is a very well organized and informative course! (Georgie P)</p>

Reiki Level 2 Practitioner Online Course

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>The primary audience for this course is any IT, facilities or data centre professional, who are involved in the design/build, renovation or relocation of a mission-critical data centre.</p>Overview<p>This 5-day course is designed to prepare participants to analyse a given business case and perform technical evaluation for a project plan and a set of designs for the implementation of a mission critical data centre.<br />The course also engages participants in product evaluations and demonstrates how to select equipment and develop equipment test scripts (IET) and integrated performance and validation testing (IPVT). CDCEÂ© builds upon knowledge gained in CDCP and CDCS courses. Participants who pass the exam will join the industry's elite data centre project design experts.<br />CDCEÂ© is the highest level training in the EPI Design and Build training track under the EPI Data Centre Training Framework. Participants must hold a valid CDCS certificate in order to be able to register for the CDCE class.</p><p>CDCEÂ© is the premier certification for data centre professionals in the data centre design/build and related fields.</p></div><div id="course-pills-2"><h4>Data Centre Life Cycle</h4><ul><li>Data centre lifecycle stages and phases<br />Exercise: Stage/Phase/Milestone/Document mapping</li></ul><h4>Design Preparation</h4><ul><li>Creation of a SON ? Statement Of Need<br />Technology review<br />Conceptual sizing<br />How to calculate for computer room space<br />How to calculate facility space<br />How to calculate incoming power<br />Exercise: Conceptual sizing building and power<br />Analysing capacity of existing facility<br />Analysing investment options<br />Site selection<br />Permits and approvals<br />Exercise: Site selection<br />Conceptual design<br />Budget and project timeline<br />Business case preparation<br />Project delivery structure<br />Project management options<br />Project manager and team</li></ul><h4>Design Planning</h4><ul><li>OSRA?Operational Systems Requirement Analysis<br />TFRA?Technical Facilities Requirement Analysis<br />Operations and maintenance review<br />RFP?Request For Proposal process<br />Vendor selection</li></ul><h4>Design Development</h4><ul><li>Project planning<br />Design development<br />PDR ? Preliminary Design Review<br />Equipment selection<br />FDR/V ? Final Design Review/Validation<br />Exercise: Full design validation of power, cooling, floor plans, fire suppression<br />Design freeze and LLTI<br />Creation of construction documents<br />BOM/BOQ ? Bill Of Material/Bill Of Quantity<br />Exercise: Equipment selection</li></ul><h4>Acquire</h4><ul><li>Requirements of purchase orders<br />Shipping terms<br />FWT/FAT ? Factory Witness Test/Factory Acceptance Test<br />Sequencing<br />Incoming goods inspection and handling<br />Asset management</li></ul><h4>Construct</h4><ul><li>Temporary essential services<br />Erection of the building<br />Permanent essential services<br />Building inspection<br />Snag list<br />COF?Certificate Of Fitness</li></ul><h4>Fit-Out</h4><ul><li>Fit-Out<br />Builders cleaning<br />As-Built Drawings</li></ul><h4>Test &amp; Commissioning</h4><ul><li>IET?Individual Equipment Test<br />IPVT/IST?Integrated Performance Verification Test/Integrated Systems Test<br />Common mistakes with IET/IPVT<br />Deep cleaning<br />Exercise: IET/IPVT scripting</li></ul><h4>Hand-Over</h4><ul><li>Facility hand-over requirements and documents<br />PCC?Practical Completion Certificate<br />DLP?Defect Liability Period<br />Defect Management<br />ICT Systems Installation<br />ICT Systems Testing<br />Hand-Over/DLP Expiry<br />FCC?Final Completion Certificate</li></ul><h4>Retirement</h4><ul><li>Reasons and definitions of retirement<br />Building the business case and project plan<br />Sequencing<br />Transfer of site<br />Demolishing of site<br />Legal matters<br />FCC?Final Completion Certificate</li></ul><h4>Exam: Certified Data Centre Expert (CDCEÂ©)</h4><ul><li>The CDCEÂ© exam is in two parts: Part A is a 90-minute closed book exam, with 60 multiple-choice questions. For Part A, the candidate requires a minimum of 45 correct answers to pass the exam. Part B is a 90-minute closed book exam, with 25 open questions. For Part B the candidate needs to obtain a minimum of 75% to pass.</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Data Centre Expert (CDCE) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Data Centre Expert (CDCE) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Nexus Human

Certified in Cybersecurity (CC)

IT Certifications

Construction Design & Management (CDM)

Cisco Certified Internetwork Expert (CCIE)

Certified in Data Protection (CDP)

Certified Cyber Professional (CCP)

Certified Data Centre Expert (CDCE)

Reading

Dickson Training Ltd

ILM Level 5 Qualifications in Business Coaching and Mentoring

Diploma (Zoom)

Certificate (Zoom)

Diploma

Certificate

Bromley

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">ECS Health &amp; Safety Courses&nbsp;</strong>and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.</p><p style="text-align: center; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="text-align: center;"><a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-size: 24px; box-sizing: border-box;" fr-original-style="font-size: 24px;">Learn More @ MJ Electrical Training &gt;&gt;</span></strong></a></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core Day</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why is the ECS Labourer Card Important?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Pathways to the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">1.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route One</strong>: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">2.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route Two</strong>: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety Exemption</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who Should Take This Course?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Benefits of the SPA Health &amp; Safety Core Day</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Comprehensive Training</b>: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Flexible Learning</b>: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Certification</b>: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Further Opportunities with the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Verify and Stay Updated</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Conclusion</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Taking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p>

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Health & Safety

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Kent

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">ECS Health &amp; Safety Courses&nbsp;</strong>and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.</p><p style="text-align: center; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="text-align: center;"><a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-size: 24px; box-sizing: border-box;" fr-original-style="font-size: 24px;">Learn More @ MJ Electrical Training &gt;&gt;</span></strong></a></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core Day</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why is the ECS Labourer Card Important?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Pathways to the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">1.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route One</strong>: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">2.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route Two</strong>: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety Exemption</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who Should Take This Course?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Benefits of the SPA Health &amp; Safety Core Day</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Comprehensive Training</b>: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Flexible Learning</b>: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Certification</b>: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Further Opportunities with the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Verify and Stay Updated</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Conclusion</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Taking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p>

ECS Card Health & Safety Course Bromley

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">ECS Health &amp; Safety Courses&nbsp;</strong>and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.</p><p style="text-align: center; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="text-align: center;"><a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-size: 24px; box-sizing: border-box;" fr-original-style="font-size: 24px;">Learn More @ MJ Electrical Training &gt;&gt;</span></strong></a></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core Day</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why is the ECS Labourer Card Important?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Pathways to the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">1.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route One</strong>: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">2.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route Two</strong>: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety Exemption</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who Should Take This Course?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Benefits of the SPA Health &amp; Safety Core Day</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Comprehensive Training</b>: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Flexible Learning</b>: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Certification</b>: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Further Opportunities with the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Verify and Stay Updated</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Conclusion</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Taking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p>

491 Courses in Manchester

Commissioning and Start-Up Activities of Coal Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Mature Field Development and Management

By EnergyEdge - Training for a Sustainable Energy Future

Artificial Lift and Real-Time Production Optimization in Digital Oilfield

By EnergyEdge - Training for a Sustainable Energy Future

Gas Lift Design & Optimization using NODAL Analysis

By EnergyEdge - Training for a Sustainable Energy Future

Carbon Capture and Storage (CCS): Project Risks & How to Manage Them

By EnergyEdge - Training for a Sustainable Energy Future

Advanced Load Forecasting & Methodology

By EnergyEdge - Training for a Sustainable Energy Future

Industrial Instrumentation and Modern Control Systems

By EnergyEdge - Training for a Sustainable Energy Future

Green Hydrogen Production from Offshore Wind

By EnergyEdge - Training for a Sustainable Energy Future

Subsea Control Systems & Umbilicals

By EnergyEdge - Training for a Sustainable Energy Future

Materials Management

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location