Stoke on Trent

<h2>Course Details</h2>Overview of the CITB TWCTC Course
The Temporary works coordinator training course (TWCTC) is designed to assist those on site who have responsibility for managing all forms of temporary works. The course has been designed to give confidence to senior management, and to ensure that those who engage contractors have an assessed standard of knowledge.This course will give the delegate a thorough knowledge of the temporary works coordinator (TWC) role. However, this does not make a delegate competent by itself. Competence requires other attributes, such as experience. 

Entry requirements
There are no formal entry requirements. However, delegates should hold, or be about to hold, the role of a TWC.

Assessment
Assessment will be by a multiple-choice examination at the end of the course. Delegates will also be expected to interact and participate during the course. 

The examination paper is compulsory and consists of 25 multiple-choice questions selected by CITB. It forms the basis of assessing whether a delegate has achieved a sufficient level of understanding to be awarded the Temporary works coordinator training course (TWCTC) certificate. 

The examination lasts for 30 minutes and must be completed within this time. 
The examination is open book.
The examination pass mark is 72%

Length of Course
This course is designed to be completed over two consecutive days. Delegates are required to attend both days (14 hours) and to pass the end-of-course assessment to be eligible for certification.

The natural progression from this course would be to either the Site management safety training scheme (SMSTS) or Director's role for health and safety (DRHS) course, where duties allow. 

The course is supported by a number of organisations, including the Temporary Works forum, CECA, Build UK, HSE and FMB. This enables transferability of the training within the industry. Temporary works are safety- and business-critical and require careful coordination. An accepted way of achieving this is through the adoption of the management process outlined in BS 5975:2019, which introduces the temporary works coordinator (TWC) as a key figure. This course explains the role and its overall management context. Temporary works on both smaller and larger sites can be high risk. Therefore, understanding the essentials of good risk and safety management, as outlined in BS 5975:2019, is relevant for projects of all sizes.

You Can Do It .Training

Citb

Certificate in Teaching Program (CTP)

Certificate of Completion of Training (CCT)

CSCS (Construction Skills Certification Scheme)

Site Management Safety Training Scheme (SMSTS)

Engineering Construction Industry Training (ECITB)

This course is designed to assist those on site who have responsibility for managing all forms of...

CITB Temporary Works Coordinator On-Site

Our Health &amp; Safety Awareness course will help to improve your employee&#39;s knowledge of safe working practices, reduce risks in the workplace, and help to create a more compliant, safer work environment. These safety training courses help you keep up to date with the latest Health and Safety legislation, remain compliant, and ensure your employees are always following the safest work procedures.<h2 id="isPasted" fr-original-style="" style="box-sizing: border-box;">What are the aims of this course?</h2><ul fr-original-style="" style="box-sizing: border-box;"><li id="isPasted" fr-original-style="" style="box-sizing: border-box;">The main hazards and risks to health and safety at work, how they are controlled, and your part in helping to control them.</li><li fr-original-style="" style="box-sizing: border-box;">The responsibilities of employers and employees under health and safety legislation.</li><li fr-original-style="" style="box-sizing: border-box;">The importance of, and the key factors in, risk assessments to control hazards and prevent risks.</li><li fr-original-style="" style="box-sizing: border-box;">The hazards and ill-health effects associated with specific work activities and processes, and the key controls to remove or reduce these risks so that they do not cause harm.</li></ul>

Prima Cura Training

Health & Safety Awareness

Health & Safety At Work

This Health & Safety in the Care Sector Course works alongside, and helps, learners understand Standard 13 of the Care Certificate. This Standard touches on the legislation, policies & responsibilities relating to Health & Safety in the care sector, as well as looking at accidents and sudden illnesses.

Bury St Edmunds

Thetford

The QA Level 2 Award in Fire Safety (<a href="https://nrmedical.training/book-a-course/p/level2-safeguarding-course" style="color: var(--paragraphLinkColor); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: var(--paragraphLinkColor);">RQF) qualification</a>&nbsp;is ideal for businesses that have assigned personnel with specific fire safety responsibilities such as&nbsp;<a href="https://nrmedical.training/fire-safety-training/fire-safety-awareness" style="color: var(--paragraphLinkColor); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: var(--paragraphLinkColor);">fire wardens</a>&nbsp;or fire marshals in the workplace.This comprehensive 1-day course provides businesses with the opportunity to equip their designated personnel with the&nbsp;<a href="https://nrmedical.training/blog/understanding-and-preventing-choking-a-comprehensive-guide" style="color: var(--paragraphLinkColor); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: var(--paragraphLinkColor);">essential knowledge</a>&nbsp;and skills in fire safety. The course covers crucial topics detailed below. Investing in this training will give your business the peace of mind that your employees are fully equipped to handle fire safety incidents and protect your workplace.

NR Medical Training

The QA Level 2 Award in Fire Safety (RQF) qualification is ideal for businesses that have assigned personnel with specific fire safety responsibilities such as fire wardens or fire marshals in the workplace.

Level 2 Award in Fire Safety (RQF)

<h2>Course Details</h2>This highly-regarded course gives team leaders, supervisors and managers, the training they need to manage health and safety effectively. Delegates will learn about safety and risk management in the workplace. This course is created for up to 16 delegates.

ð Course content
Introduction and overview of the Health and Safety Law
Responsibilities of Supervisors and Managers
Assessing risks - definitions, factors to consider when carrying out a risk assessment
Risk control selection and the best methods to choose, including consideration of 'reasonably
practicable'

Site Safety Supervisor

Occupational Health & Safety

Workplace Health & Safety

Health & Safety

IOSH

This highly-regarded course gives team leaders, supervisors and managers, the training they need...

IOSH Managing Safely (On Site - 3 Days)

<h2>Course Details</h2>If no dates are available, please contact the office on 01782 438813 for our next dates. 

This course gives delegates a better understanding of safety and the assessment of risk when working within confined spaces, keeping individuals and those around them safe.

ð Course Contents
Understand the legislation applying to Confined Space work
Understand Hazards associated with Confined Space
Undertake Risk Assessments for Confined Space work
Develop Safe Systems of Work and Safe Methods of Work for Confined Space operations (Including Risk Assessments, Method Statements, Rescue Plans and Permit to Work)
Safety Person (Top Man) Responsibilities
Understand the mechanism of atmosphere testing and monitoring
Develop, install and maintain emergency plans and procedures
Maintain records and documents for Confined Space work

If no dates are available please call the team on 01782 438813 for available dates.

Course Details
If no dates are available, please contact the office on 01782 438813 for our next dates. This course gives delegates a better understanding of safety and the assessment of risk when working within confined spaces, keeping individuals and those around them safe. ð Course Contents
Understand the legislation applying to Confined Space work
Understand Hazards associated with Confined Space
Undertake Risk Assessments for Confined Space work
Develop Safe Systems of Work and Safe Methods of Work for Confined Space operations (Including Risk Assessments, Method Statements, Rescue Plans and Permit to Work)
Safety Person (Top Man) Responsibilities
Understand the mechanism of atmosphere testing and monitoring
Develop, install and maintain emergency plans and procedures
Maintain records and documents for Confined Space work If no dates are available please call the team on 01782 438813 for available dates.

First Aid At Work

Construction Safety

Confined Space

Safety Awareness

This 1/2 day course gives delegates a better understanding of safety and the assessment of risk.

Confined Space Awareness (On-Site)

<h2>Course Details</h2>This course concentrates on the legal requirements for risk assessments in the organisation and the assessments and practical application. This course will give delegates the ability to carry out suitable and sufficient risk assessments.

ð Course Contents
Health and safety legislation
The management of health and safety at work regulations
Workplace accidents (causation)
The risk assessments process, understanding the key steps
Undertaking a practical risk assessment
Half day

Course Details
This course concentrates on the legal requirements for risk assessments in the organisation and the assessments and practical application. This course will give delegates the ability to carry out suitable and sufficient risk assessments. ð Course Contents
Health and safety legislation
The management of health and safety at work regulations
Workplace accidents (causation)
The risk assessments process, understanding the key steps
Undertaking a practical risk assessment
Half day

Fire Risk Assessment

Risk Assessment

This course concentrates on the legal requirements for risk assessments in the organisation and...

Risk Assess. & Method Statement On-Site

<h2>Course Details</h2>Overview of the CITB TWSTC Course
This course complements the Temporary works coordinator training course (TWCTC) and is designed to provide training for those undertaking the role of temporary works supervisor (TWS), as defined in BS 5975:2019. The rationale for the TWSTC is to set and raise standards across the industry, and to enable a transferable knowledge base between employers to avoid unnecessary supplementary training.

Entry requirements
There are no formal entry requirements. However, delegates should hold, or be about to hold, the role of a temporary works supervisor. 

Assessment
The examination paper is compulsory and consists of 25 multiple-choice questions selected by CITB. 

It forms the basis of assessing whether a delegate has achieved a sufficient level of understanding to be awarded the Temporary works supervisor training course (TWSTC) certificate. 

The examination lasts for 30 minutes and must be completed within this time. 
The examination is open book.
The examination pass mark is 72%.

Length of Course
This course is designed to be completed in one day. Delegates are required to attend the full day (seven hours) and pass the end-of-course assessment to be eligible for certification. 

The natural progression from this course would be to the Temporary works coordinator training course (TWCTC) if duties allowed.

Certificate in Education & Training (CET)

This course is designed to provide training for those undertaking the role of temporary works...

CITB Temp Wks Sup'visor (1 Day)(On-Site)

Harpenden

This is a very popular, comprehensive, practical and experiential programme, covering:<ul><li>Assessing risks: Defines and demystifies risk and risk assessment. Risk assessments and a simple scoring system are introduced, and participants carry out assessments.</li><li>Controlling risks: Cutting risks down, concentrating on the best techniques to control key risks and how to choose the right methods.</li><li>Understanding your responsibilities: The legal framework; health &amp; safety management systems.</li><li>Identifying hazards: The main issues any organisation has to deal with: entrances and exits, work traffic, fire, chemicals, electricity, physical and verbal abuse, bullying, stress, noise,</li><li>housekeeping and the working environment, slips, trips and falls, working at height, computers and manual handling.</li><li>Investigating accidents and incidents: Why accidents should be investigated, why things go wrong and how to carry out an investigation when they do.</li><li>Measuring performance: How checking performance can help to improve health &amp; safety. How to develop basic performance indicators. Auditing and proactive and reactive measuring.</li><li>Protecting the environment: Introduction to waste and pollution. How organisations and individual managers can get involved in cutting down their environmental impacts.</li></ul><h3>The programme enables participants to:</h3><ul><li>Assess and control risks and hazards</li><li>Understand their own responsibilities for safety and health</li><li>Investigate incidents</li><li>Measure their own performance</li><li>Reflect on good practice and plan how to ensure the safety of the staff for whom they are responsible</li></ul>

The In House Training Company

Managing Safely - IOSH Award (In-House)

The IOSH Managing Safelyaward is valid for three years. Award-holders need to undertake this one-day refresher programme every three years in order to maintain their status.This very interactive, practical programme covers:An interactive case study exercise is used throughout the day to apply refreshed knowledge to the plan-do-check-act model and then link it back to the workplace. For example, participants examine the elements of a safety and health policy, come up with ideas to influence safety culture, and select the best communication methods to engage a workforce.

Safety Manager

Fire Safety Instructor

Managing Safely Refresher - IOSH Award (In-House)

A high-impact programme designed to be fun and to get people fully involved. The first-class, jargon-free content is based on what people need to know in practice, not off-putting legal language.<h4>This introductory course covers:</h4><ul><li>Introducing Working Safely: Accidents can happen to anyone. The realities of the human suffering behind the statistics. The importance of personal responsibility.</li><li>Defining hazard and risk: Focusing on the six broad hazard groups, participants are asked to think about the hazards and risks they come across in their own work. 'Risk assessment' demystified.</li><li>Identifying common hazards: All the main issues - aggression and violence, asbestos, bullying, chemicals and harmful substances, computer workstations, confined spaces, drugs and alcohol, electricity, fire, getting in and out, height, housekeeping, lighting, manual handling, noise, personal hygiene, plant and machinery, slips and trips, stress, temperature, vehicles and transport, and welfare facilities.</li><li>Improving safety performance: Bridging the gap between management and workforce, encouraging participants to play their part. Also covered: contract work, inspections, safe systems and permits, protective equipment, signage, emergency procedures, reporting and health checks.</li></ul>

Working Safely

Working Safely - IOSH Award (In-House)

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Kent

General Admission

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Dover

ECS Card Health & Safety Course Liverpool

ECS Card Health & Safety Course Newcastle

This combined HACCP and Food Safety Level 4 course, developed by STC and accredited by the CPD Accreditation Office, will give you a 2 in 1 qualification which is unique. Other training providers only provide these as separate qualifications, however STC has challenged this practice since &ldquo;you can&rsquo;t know HACCP without food safety, and you can&rsquo;t know food safety without HACCP!&rdquo; And at Ask Sonia Ltd, we whole heartedly agree!We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP &amp; Food Safety.&nbsp;Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical &amp; Quality departments and HACCP team members, team leaders, consultants or trainers. The qualification is also suitable for those working in related industries, such as packaging, storage &amp; distribution.The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.Attendees should already have knowledge of food safety hazards and controls, as this course will take the attendee through the intermediate levels at the start, and build up to provide the required advanced level of knowledge and understanding by the end of the course.HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.This course has been accredited by the CPD Accreditation Office for delivery, structure and content.

This combined HACCP and Food Safety Level 4 course, developed by STC and accredited by the CPD Accreditation Office, will give you a 2 in 1 qualification which is unique. Other training providers only provide these as separate qualifications, however STC has challenged this practice since “you can’t know HACCP without food safety, and you can’t know food safety without HACCP!” And at Ask Sonia Ltd, we whole heartedly agree!
We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP & Food Safety. 
Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical & Quality departments and HACCP team members, team leaders, consultants or trainers. The qualification is also suitable for those working in related industries, such as packaging, storage & distribution.
The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.
Attendees should already have knowledge of food safety hazards and controls, as this course will take the attendee through the intermediate levels at the start, and build up to provide the required advanced level of knowledge and understanding by the end of the course.
HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.
This course has been accredited by the CPD Accreditation Office for delivery, structure and content.

Ask Sonia Limited

Food Safety

HACCP

CPD accredited Advanced (Level 4) HACCP & Food Safety training course. 
Delivered online (Zoom) by a live tutor.
Exam and Certificate fee included in the price.

CPD Accredited Advanced Combined HACCP & Food Safety Level 4 (5 days)

This combined HACCP and Food Safety Level 3 course,&nbsp;developed by STC and accredited by the CPD Accreditation Office, will give you a 2 in 1 qualification which is unique. Other training providers only provide these as separate qualifications, however STC has challenged this practice since &ldquo;you can&rsquo;t know HACCP without food safety, and you can&rsquo;t know food safety without HACCP!&rdquo;&nbsp;And at Ask Sonia Ltd, we whole heartedly agree!We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP and Food Safety.Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical and Quality departments and HACCP team members. The qualification is also suitable for those working in related industries, such as packaging, storage and distribution.The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.It is a good idea for attendees to already have some knowledge of food safety hazards and controls, however this is not essential as this course will provide the required knowledge and understanding.HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.This course has been accredited by the CPD Accreditation Office for delivery, structure and content.

This combined HACCP and Food Safety Level 3 course, developed by STC and accredited by the CPD Accreditation Office, will give you a 2 in 1 qualification which is unique. Other training providers only provide these as separate qualifications, however STC has challenged this practice since “you can’t know HACCP without food safety, and you can’t know food safety without HACCP!” And at Ask Sonia Ltd, we whole heartedly agree!
We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP and Food Safety.
Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical and Quality departments and HACCP team members. The qualification is also suitable for those working in related industries, such as packaging, storage and distribution.
The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.
It is a good idea for attendees to already have some knowledge of food safety hazards and controls, however this is not essential as this course will provide the required knowledge and understanding.
HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.
This course has been accredited by the CPD Accreditation Office for delivery, structure and content.

CPD accredited Intermediate (Level 3) HACCP & Food Safety training course. 
Delivered online (Zoom) by a live tutor.
Exam and Certificate fee included in the price.

CPD Accredited Intermediate Combined HACCP & Food Safety Level 3 (2.5 days)

This qualification is aimed at those responsible for assisting in the development and maintenance of food safety systems in a food manufacturing, catering or related environment.The objective of the qualification is to provide learners with the knowledge necessary to maintain food safety at all stages in manufacturing, catering and other related industries, for example those involved in distribution and storage.We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to Food Safety.Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical and Quality departments and HACCP team members.The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.It is a good idea for attendees to already have some knowledge of food safety hazards and controls, however this is not essential as this course will provide the required knowledge and understanding.Food safety training (including HACCP) is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.This course has been accredited by the CPD Accreditation Office for delivery, structure and content. It is brought to you by a selected CIEH registered Training Partner.

This qualification is aimed at those responsible for assisting in the development and maintenance of food safety systems in a food manufacturing, catering or related environment.
The objective of the qualification is to provide learners with the knowledge necessary to maintain food safety at all stages in manufacturing, catering and other related industries, for example those involved in distribution and storage.
We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to Food Safety.
Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical and Quality departments and HACCP team members.
The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.
It is a good idea for attendees to already have some knowledge of food safety hazards and controls, however this is not essential as this course will provide the required knowledge and understanding.
Food safety training (including HACCP) is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.
This course has been accredited by the CPD Accreditation Office for delivery, structure and content. It is brought to you by a selected CIEH registered Training Partner.

Accredited Food Safety

CIEH Level 3 Food Safety in manufacturing. 
Delivered online (Zoom) by a live tutor.
Exam and Certificate fee included in the price.

CIEH Level 3 Food Safety in Manufacturing (2 Days)

This qualification is aimed at those responsible for assisting in the development and maintenance of HACCP systems in a food manufacturing environment.The objective of the qualification is to provide learners with the knowledge necessary to be an integral part of a HACCP team in manufacturing and other related industries, for example those involved in distribution and storage. The qualification is aimed at learners who are already working in food manufacturing with knowledge of food hazards and controls.We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP and Food Safety.Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical and Quality departments and HACCP team members. The qualification is also suitable for those working in related industries, such as packaging, storage and distribution.The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.It is a good idea for attendees to already have some knowledge of food safety hazards and controls, however this is not essential as this course will provide the required knowledge and understanding.HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.This course has been accredited by the CPD Accreditation Office for delivery, structure and content. It is brought to you by a selected CIEH registered Training Partner.

This qualification is aimed at those responsible for assisting in the development and maintenance of HACCP systems in a food manufacturing environment.
The objective of the qualification is to provide learners with the knowledge necessary to be an integral part of a HACCP team in manufacturing and other related industries, for example those involved in distribution and storage. The qualification is aimed at learners who are already working in food manufacturing with knowledge of food hazards and controls.
We are very proud to offer this accredited qualification to those involved with any and all aspects in a food business relating to HACCP and Food Safety.
Holders of the qualification will have the knowledge necessary to be an integral part of a food business as well as part of Technical and Quality departments and HACCP team members. The qualification is also suitable for those working in related industries, such as packaging, storage and distribution.
The qualification is also relevant to those owning/managing smaller food businesses to give them the underpinning knowledge to develop a HACCP study and understand the fundamentals of food safety.
It is a good idea for attendees to already have some knowledge of food safety hazards and controls, however this is not essential as this course will provide the required knowledge and understanding.
HACCP and food safety training is regarded by the Foods Standards Agency as being important to maintaining good practice in the production of safe food.
This course has been accredited by the CPD Accreditation Office for delivery, structure and content. It is brought to you by a selected CIEH registered Training Partner.

CIEH Level 3 Intermediate HACCP certificate in manufacturing. 
Delivered online (Zoom) by a live tutor.
Exam and Certificate fee included in the price.

CIEH Intermediate (Level 3) Certificate in HACCP (2 Days)

24-Hour Knowledge Knockdown! Prices Reduced Like Never Before Did you know that in 2022/23, an estimated 1.7 million workers in the UK suffered from a work-related illness? Many of these illnesses could have been prevented through proper safety training. This COSHH, DSEAR and Gas Safety training bundle equips you with the knowledge and skills to work safely in a variety of environments. Are you ready to take control of your workplace safety and wellbeing?With a single payment, you will gain access to the COSHH course, including 10 premium courses, a QLS Endorsed Hardcopy certificate (for the title course) and 11 PDF certificates for Absolutely free.This COSHH, DSEAR and Gas Safety Training Bundle Package includes:<ul><li>Main Course: Certificate in COSHH Training at QLS Level 3</li></ul>10 Premium Additional CPD QS Accredited Courses -<ul><li>Course 01: DSEAR</li><li>Course 02: Gas Safety Legislation</li><li>Course 03: Online Fire Risk Assessor</li><li>Course 04: Ladder Safety</li><li>Course 05: Risk Assessment</li><li>Course 06: PUWER</li><li>Course 07: Personal Protective Equipment (PPE)</li><li>Course 08: Workplace Health and Safety</li><li>Course 09: Electrical Safety</li><li>Course 10: RIDDOR Awareness</li></ul>This COSHH Training bundle covers a wide range of health and safety topics, including the Control of Substances Hazardous to Health (COSHH), the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR), gas safety, fire risk assessment, and more. You'll gain insights into risk assessment techniques, personal protective equipment (PPE) selection, and important workplace regulations like PUWER (Providing and Using Work Equipment Regulations).Learning Outcomes of COSHH, DSEAR and Gas Safety Training<ul><li>Develop comprehensive knowledge of COSHH, DSEAR, and gas safety regulations.</li><li>Master risk assessment techniques and control measures for hazard mitigation.</li><li>Gain insights into fire risk assessment and ladder safety procedures.</li><li>Learn about PUWER and safe equipment use in the workplace.</li><li>Understand the importance of PPE and electrical safety practices.</li><li>Acquire knowledge of RIDDOR reporting requirements for workplace incidents.</li></ul>By investing in this course bundle, you'll gain the knowledge and skills you need to create a safer and healthier working environment for yourself and your colleagues. So enrol now!Why Choose Our COSHH Training Bundle?<ul><li>Get a Free QLS Endorsed Certificate upon completion of COSHH Training</li><li>Get a free student ID card with COSHH Training Training</li><li>The COSHH Training is affordable and simple to understand</li><li>The COSHH Training is an entirely online, interactive lesson with voiceover audio</li><li>Lifetime access to the COSHH Training course materials</li><li>The COSHH Training comes with 24/7 tutor support</li></ul> Start your learning journey straightaway!*** Course Curriculum ***Main Course: Certificate in COSHH Training at QLS Level 3<ul><li>COSHH Explained</li><li>COSHH Regulations</li><li>Health Problems Related to Hazardous Substances</li><li>Identifying Hazardous Substances</li><li>COSHH Risk Assessments</li><li>Control Measures and Monitoring</li><li>Implementing Control Measures</li></ul>Course 01: DSEAR<ul><li>Introduction to DSEAR </li><li>ATEX and Explosive Atmospheres </li><li>General Safety </li><li>Safe Working with Flammable Substances </li><li>Equipment and Protection System </li><li>Risk Assessment </li></ul>Course 02: Gas Safety Legislation<ul><li>Module 01: Gas Safety Legislation</li><li>Module 02: Combustion</li><li>Module 03: Transmission System: Pipes And Flues</li><li>Module 04: Ventilation</li><li>Module 05: Tightness Testing</li><li>Module 06: Meter Regulator Check</li><li>Module 07: Appliance Pressures And Gas Rates</li><li>Module 08: Emergency Isolation Controls And Valves</li><li>Module 09: Gas Safety Devices And Controls</li><li>Module 10: Gas Warning Labelling</li></ul>=========&gt;&gt;&gt;&gt;&gt; And 8 More Courses &lt;&lt;&lt;&lt;&lt;=========How will I get my Certificate?After successfully completing the course, you will be able to order your Certificates as proof of your achievement.<ul><li>PDF Certificate: Free (Previously it was £12.99*11 = £143)</li><li>QLS Endorsed Hard Copy Certificate: Free (For The Title Course: Previously it was £89)</li></ul> <h2>
 
 <div>CPD</div>
 </h2>

 <div id="cpd">
 <div>
 <div>
 <div>
 220 CPD hours / points
 </div>
 <div>
 Accredited by CPD Quality Standards
 </div>
 </div>
 </div>
 </div> <h2>
 
 <div>Who is this course for?</div>
 </h2>

 <div id="who_is_this_course_for">
 This COSHH, DSEAR and Gas Safety Training is perfect for highly motivated people who want to improve their technical skills and prepare for the career they want!<ul><li>Employees and employers working in hazardous environments</li><li>Professionals who want to increase their knowledge and compliance with industry regulations</li><li>Anyone interested in developing their understanding of workplace safety and risk assessment</li><li>Individuals seeking recognised qualifications and CPD points to enhance their CV and career prospects</li></ul>
 </div> <h2>
 
 <div>Requirements</div>
 </h2>

 <div id="requirements">
 You will not need any prior background or expertise to enrol in this COSHH, DSEAR and Gas Safety Training bundle.
 </div> <h2>
 
 <div>Career path</div>
 </h2>

 <div id="career_path">
 After completing this COSHH, DSEAR and Gas Safety Training bundle, you are to start your career or begin the next phase of your career.<ul><li>Safety Officer</li><li>Health &amp; Safety Advisor</li><li>Risk Assessor</li><li>Fire Warden</li><li>Safety Inspector</li></ul>
 </div> <h2>
 
 <div>Certificates</div>
 </h2>

 <div id="optional_extras">
 <h4>Certificate in DSEAR at QLS Level 3</h4>
 
 Hard copy certificate -
 Included
 
 <div>Please note that International students have to pay an additional £10 as a shipment fee.</div>
 <h4>CPD Accredited Digital Certificate</h4>
 
 Digital certificate -
 Included
 
 <div>Upon passing the Course, you need to order a Digital Certificate for each of the courses inside this bundle as proof of your new skills that are accredited by CPD QS for Free.</div>

 </div>

24-Hour Knowledge Knockdown! Prices Reduced Like Never Before 
Did you know that in 2022/23, an estimated 1.7 million workers in the UK suffered from a work-related illness? Many of these illnesses could have been prevented through proper safety training. This COSHH, DSEAR and Gas Safety training bundle equips you with the knowledge and skills to work safely in a variety of environments. Are you ready to take control of your workplace safety and wellbeing?
With a single payment, you will gain access to the COSHH course, including 10 premium courses, a QLS Endorsed Hardcopy certificate (for the title course) and 11 PDF certificates for Absolutely free.
This COSHH, DSEAR and Gas Safety Training Bundle Package includes:
Main Course: Certificate in COSHH Training at QLS Level 3
10 Premium Additional CPD QS Accredited Courses related to COSHH Training -
Course 01: DSEAR
Course 02: Gas Safety Legislation
Course 03: Online Fire Risk Assessor
Course 04: Ladder Safety
Course 05: Risk Assessment
Course 06: PUWER
Course 07: Personal Protective Equipment (PPE)
Course 08: Workplace Health and Safety
Course 09: Electrical Safety
Course 10: RIDDOR Awareness
This COSHH Training bundle covers a wide range of health and safety topics, including the Control of Substances Hazardous to Health (COSHH), the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR), gas safety, fire risk assessment, and more. With COSHH Training you'll gain insights into risk assessment techniques, personal protective equipment (PPE) selection, and important workplace regulations like PUWER (Providing and Using Work Equipment Regulations).
Learning Outcomes of COSHH, DSEAR and Gas Safety Training
Understand the principles of COSHH and how to apply them to minimise workplace risks from hazardous substances.
Learn to conduct thorough COSHH risk assessments to identify and control exposure to harmful substances.
Understand the integration of COSHH regulations with DSEAR and other safety legislation to create a safer work environment.
Recognize hazardous substances according to COSHH guidelines and implement appropriate control measures.
Gain practical knowledge of how COSHH works alongside Gas Safety and Fire Risk regulations to ensure comprehensive workplace safety.
Learn to develop effective control strategies in line with COSHH to ensure compliance and reduce health risks in the workplace.
Understand the responsibilities of employers and employees under COSHH regulations to maintain a safe working environment.
Be able to implement and monitor COSHH measures in conjunction with personal protective equipment (PPE) guidelines for maximum safety.
Develop competency in documenting and reporting incidents as required by COSHH and RIDDOR for legal compliance.
Learn how to use safety equipment effectively in hazardous environments following COSHH and PUWER standards to protect employees from harm.
By investing in this COSHH Training bundle, you'll gain the knowledge and skills you need to create a safer and healthier working environment for yourself and your colleagues. So enrol now!



Why Choose Our COSHH Training Bundle?
Get a Free QLS Endorsed Certificate upon completion of COSHH Training
Get a free student ID card with COSHH Training Training
The COSHH Training is affordable and simple to understand
The COSHH Training is an entirely online, interactive lesson with voiceover audio
Lifetime access to the COSHH Training course materials
The COSHH Training comes with 24/7 tutor support



Start your learning journey straightaway with COSHH, DSEAR and Gas Safety Training!
*** Course Curriculum of COSHH, DSEAR and Gas Safety Training***
Main Course: Certificate in COSHH Training at QLS Level 3
COSHH Explained
COSHH Regulations
Health Problems Related to Hazardous Substances
Identifying Hazardous Substances
COSHH Risk Assessments
Control Measures and Monitoring
Implementing Control Measures
Course 01: DSEAR
Introduction to DSEAR
ATEX and Explosive Atmospheres
General Safety
Safe Working with Flammable Substances
Equipment and Protection System
Risk Assessment
Course 02: Gas Safety Legislation
Module 01: Gas Safety Legislation
Module 02: Combustion
Module 03: Transmission System: Pipes And Flues
Module 04: Ventilation
Module 05: Tightness Testing
Module 06: Meter Regulator Check
Module 07: Appliance Pressures And Gas Rates
Module 08: Emergency Isolation Controls And Valves
Module 09: Gas Safety Devices And Controls
Module 10: Gas Warning Labelling
=========>>>>> And 8 More Courses <<<<<=========
How will I get my COSHH Training Certificate?
After successfully completing the COSHH Training course, you will be able to order your Certificates as proof of your achievement.
PDF Certificate: Free (Previously it was £12.99*11 = £143)
QLS Endorsed Hard Copy Certificate: Free (For The Title Course: Previously it was £89)
 CPD 
220 CPD hours / points Accredited by CPD Quality Standards



 Who is this course for? 
This COSHH, DSEAR and Gas Safety Training is perfect for highly motivated people who want to improve their technical skills and prepare for the career they want!
Employees and employers working in hazardous environments
Professionals who want to increase their knowledge and compliance with industry regulations
Anyone interested in developing their understanding of workplace safety and risk assessment
Individuals seeking recognised qualifications and CPD points to enhance their CV and career prospects



 Requirements 
You will not need any prior background or expertise to enrol in this COSHH, DSEAR and Gas Safety Training bundle.



 Career path 
After completing this COSHH, DSEAR and Gas Safety Training bundle, you are to start your career or begin the next phase of your career.
Safety Officer
Health & Safety Advisor
Risk Assessor
Fire Warden
Safety Inspector



 Certificates 
Certificate in DSEAR at QLS Level 3
 Hard copy certificate - Included 
Please note that International students have to pay an additional £10 as a shipment fee.
CPD Accredited Digital Certificate
 Digital certificate - Included 
Upon passing the COSHH Training Course, you need to order a Digital Certificate for each of the courses inside this COSHH Training bundle as proof of your new skills that are accredited by CPD QS for Free.

35 Courses in Leicester

CITB Temporary Works Coordinator On-Site

By You Can Do It .Training

Health & Safety Awareness

By Prima Cura Training

Level 2 Award in Fire Safety (RQF)

By NR Medical Training

IOSH Managing Safely (On Site - 3 Days)

By You Can Do It .Training

Confined Space Awareness (On-Site)

By You Can Do It .Training

Risk Assess. & Method Statement On-Site

By You Can Do It .Training

CITB Temp Wks Sup'visor (1 Day)(On-Site)

By You Can Do It .Training

Managing Safely - IOSH Award (In-House)

By The In House Training Company

Managing Safely Refresher - IOSH Award (In-House)

By The In House Training Company

Working Safely - IOSH Award (In-House)

By The In House Training Company

Search By Location