Name: Layer of Protection Analysis (LOPA)
Price: 1799 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong><em> </em></h2>
<p>Electrification of the transportation sector will impact the power system in several ways. Besides the additional load, local impact on the grid needs to be managed by the grid operators. Simultaneously charging of many electric vehicles (EVs) might exceed the limits in specific locations. On the other hand, EVs can provide flexibility and other ancillary services that will help grid operators.</p>
<p>This 3 half-day VILT course will provide a complete overview of integrating electric vehicles (EVs) into the power grid. It will cover the whole value chain from grid operations to the car battery. This includes the control room, possible grid reinforcement, demand side management and power electronics.</p>
<p>This course will demonstrate the impact on the grid and solutions for a safe &amp; cost-effective grid plan and operation, with examples of successful integration of EVs.</p>
<p>The course will also provide vital knowledge about technology used for EVs such as power electronics, demand side management, communication and batteries. In this context, the focus will be on power electronics as it has the highest impact on the grid. The grid planning tool, pandapower, is introduced as an open source tool for power system modelling.</p>
<p>The set-up of the training course allows for discussion and questions. Questions can be formulated by the participants upfront or during the training.</p>
<div>
<div>This course is delivered in partnership with Fraunhofer IEE.</div>
<div></div>
</div>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>At the end of this course, the participants will:</p>
<ul>
<li>Understand the charging options for EVs and its impact on the grid and batteries</li>
<li>Identify system services for EVs with regards to voltage quality at the point of common coupling</li>
<li>Discover what are the 'grid friendly' and grid supporting functions in EVs</li>
<li>Uncover the different applications, standards and data researched on EVs</li>
<li>Examine the application of a grid planning tool (pandapower) for power system modelling</li>
<li>Be able to develop code snippets with pandapower</li>
<li>Apply and execute a code example for power system modelling with pandapower</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>EV and grid project developers and administrators</li>
<li>Power grid operators and planners</li>
<li>EPC organisations involved in grid development</li>
<li>EV/ battery manufacturers and designers</li>
<li>EV transport planners and designers</li>
<li>Government regulators and policy makers</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><strong>The VILT will be delivered online in 3 half-day sessions comprising 4 hours per day, with 2 x 10 minutes breaks per day</strong>, including time for lectures, discussion, quizzes and short interactive exercises.</p>
<p>Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end of every session/day.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Our first course expert is Head of Department Converters and Electrical Drive Systems at Fraunhofer IEE and Professor for Electromobility and Electrical Infrastructure at Bonn-Rhein-Sieg University of Applied Sciences. He received his engineering degree in automation in 2008 by the THM Technische Hochschule Mittelhessen (FH Giessen-Friedberg). Afterwards he studied power engineering at University of Kassel and received his diploma certificate in 2010. In 2016 he received the Ph.D. (Dr.-Ing.) from the University of Hannover. The title of his dissertation is Optimized multifunctional bi-directional charger for electric vehicles. He has been a researcher at the Fraunhofer IEE in Kassel since 2010 and deals with power converters for electric vehicles, photovoltaics and wind energy. His current research interests include the bidirectional inductive power transfer, battery charger and inverter as well as new power electronic components such as SiC MOSFETs and chokes. Additionally, our key expert is Chairman of the IEEE Joint IAS/PELS/IES German Chapter and a member of the International Scientific Committee of the EPE Association.</p>
<p>Our second course expert is deputy head of energy storage department at Fraunhofer IEE. Prior to this he was the Director of Grid Integration department at SMA Solar Technology AG, one of the world's largest manufacturers of PV power converters. Before joining SMA, our course expert was manager of the Front Office System Planning at Amprion GmbH (formerly RWE TSO), one of the four German transmission system operators. He holds a degree of electrical engineering of the University of Kassel, Germany. In 2003 he finished his Ph.D. (Dr.-Ing.) on the topic of wind power forecasting at the 'Institute of Solar Energy Supply Technology' (now Fraunhofer IEE) in Kassel. In 2004 he started his career at RWE TSO with main focus on wind power integration and congestion management. Our course expert is chairman of the IEC SC 8A 'Grid Integration of Large-capacity Renewable Energy (RE) Generation' and has published several papers about grid integration of renewable energy source and forecasting systems on books, magazines, international conferences and workshops.</p>
<p>Our third course expert is Research Associate at Fraunhofer IEE. He is actively working on different projects related to the integration of electric vehicle charging into the electric distribution grid. The focus of this work concerns time series based simulations for grid planning and operation in order to investigate the effect of a future rollout of electric vehicles and charging infrastructure on economics e.g. costs for grid reinforcement. He completed his master degree (MSc.) in Business Administration and Engineering: Electrical Power Engineering at RWTH Aachen University, Germany.</p>
<p>Our trainers are experts from <strong>Fraunhofer Institute for Energy Economics and Energy System Technology (Fraunhofer, IEE), Germany</strong>. The Fraunhofer IEE researches for the national and international transformation of energy supply systems</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

The Impact of Electric Vehicles (EVs) on the Grid

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2>About this VILT </h2>
<p>Tripod can be used in any area of business where the organisation has a management system in place to prevent unwanted events e.g., health, safety, environment, quality, security, productivity, project management, and many more</p>
<p>Tripod Beta is one of several tools based on Tripod's fundamental principles. Tripod Beta is based on proven theories, man years of academic research, and testing in the workplace. The Swiss Cheese Model originated from this work. <br /><br />Features of the methodology are: <br />1) the Tripod Beta diagram; it provides an easy-to-read summary of the entire investigation on a single page, <br />2) it accommodates deficiencies in leadership and worker participation, <br />3) it accommodates deficiencies in human behaviour, and <br />4) it highlights missing controls (not just controls that failed). <br /><br />Quality throughout all aspects of Tripod is assured by the Stichting Tripod Foundation (STF) and the Energy Institute.</p>
<p>The participants will gain a theoretical understanding of the Tripod Beta methodology and terminology. They will be able to read Tripod diagrams and reports, and be able to assist incident investigation/analysis as a team member.  This is the first step to becoming an accredited silver or gold practitioner. </p>
<p>Tripod Beta Practitioner Accreditation is meant to build these skills, through a blend of support, coaching and assessments. Feedback is provided on Tripod incident investigation reports, giving the Practitioner the opportunity to hone their skills and become confident in their ability to use Tripod effectively.</p>
<figure></figure>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will be able to:</p>
<ul>
<li>Pass the Tripod Beta Practitioner (Bronze Level) exam</li>
<li>Act as a team member or Tripod facilitator on an incident investigation</li>
<li>Plan and schedule activities for an incident investigation</li>
<li>Focus line of enquiry during an investigation</li>
<li>Engage with the most relevant people at each stage of the investigation</li>
<li>Describe the incident causation paths in terms that align with their management system</li>
<li>Consider issues relating to leadership, worker participation and human behaviour</li>
<li>Assess the quality of an incident report</li>
<li>Apply the process to any type of unwanted event that should have been prevented by a management system e.g., health, safety, environment, financial, security, productivity, quality, project management etc.</li>
<li>Combine the findings from many incidents with data from other initiatives e.g., audits and inspections, to spot trends to prioritise actions and product a single improvement plan</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The course is recommended for anyone who is expected to play a role in designing, reviewing, auditing, and following your organizations OH&amp;S management system. Successful participants will be awarded the Stitching Tripod Foundation Tripod Beta Bronze certificate. The following oil &amp; gas company personnel will benefit from the knowledge shared in this course:</p>
<ul>
<li>CEO</li>
<li>Team Leaders</li>
<li>Legal, insurance and finance departments</li>
<li>Managers (Line and Function)</li>
<li>Maintenance Engineers</li>
<li>Quality Assurance Engineers</li>
<li>Process Engineers</li>
<li>Incident Investigators (Team member &amp; Tripod facilitator)</li>
<li>Project Managers</li>
<li>System Custodians</li>
<li>Technical Authorities</li>
<li>Key Contractor's Management</li>
<li>Contract Managers/Holders</li>
<li>Safety Representatives</li>
<li>Risk Management Engineers</li>
<li>HSE Advisors</li>
<li>Supervisors</li>
<li>Auditors</li>
<li>Regulators</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has over 30 years of experience in construction, operations and maintenance with the upstream exploration and production sector. He joined Shell International E&amp;P in 1971 and for 28 years worked in several locations around the world. Following the Piper Alpha incident he led Shell's two year, Â£10M major overhaul of their permit to work system. He first made use of the Tripod Beta principles during this period and since then he has delivered over 100 Tripod Beta courses in more than 25 locations around the world. He is a Chartered Engineer, a member of the Institution of Engineering and Technology and holds a postgraduate diploma from the University of Birmingham (UK).</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Tripod Beta Practitioner - Bronze Level

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p><strong>Business Impact:</strong> The main aim is to provide insight and understanding of data analytics and machine learning principles through applications. Field data is used to explain data-analysis workflows. Using easy to follow solution scripts, the participants will assess and extract value from the data sets. Hands-on solution approach will give them confidence to try out applicable techniques on data from their field assets.</p>
<p>Data analysis means cleaning, inspecting, transforming, and modeling data with the goal of discovering new, useful information and supporting decision-making. In this hands-on 2-day training course, the participants learn some data analysis and data science techniques and workflows applied to petroleum production (specifically artificial lift) while reviewing code and practicing. The focus is on developing data-driven models while keeping our feet closer to the underlying oil and gas production principles.</p>
<p><strong>Unique Features:</strong></p>
<ul>
<li><strong><em>Eight business use cases</em></strong> covering their business impact, code walkthroughs for most all and solution approach.</li>
<li><strong><em>Industry data sets</em></strong> for participants to practice on and take home.</li>
<li>No software or complicated Python frameworks required.</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>After the completion of this training course, participants will be able to:</p>
<ul>
<li>Understand digital oil field transformation and its impact on business</li>
<li>Examine machine learning methods</li>
<li>Review workflows and code implementations</li>
<li>After completing the course, participants will have a set of tools and some pathways to model and analyze their data in the cloud, find trends, and develop data-driven models</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This training course is suitable and will greatly benefit the following specific groups:</p>
<ul>
<li>Artificial lift, production and facilities engineers and students to enhance their knowledge base, increase technology awareness, and improve the facility with different data analysis techniques applied on large data sets</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
<li>Advanced</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The course discusses several business use-cases that are amenable to data-driven workflows. For each use case, the instructor will show the solution using a data analysis technique with Python code deployed in the Google cloud. Trainees will solve a problem and tweak their solution.</span></p>
<p><em><span>Course Duration: 2 days in total (14 hours).</span></em></p>
<p><strong><span>Training Schedule</span></strong></p>
<p><span>0830 - Registration </span><span>0900 - Start of training </span><span>1030 - Morning Break </span><span>1045 - Training recommences </span><span>1230 - Lunch Break </span><span>1330 - Training recommences </span><span>1515 - Evening break </span><span>1530 - Training recommences </span><span>1700 - End of Training</span></p>
<p><span>The maximum number of participants allowed for this training course is 20.</span></p>
<p>This course is also available through our Virtual Instructor Led Training (VILT) format.</p>
<p><strong>Prerequisites:</strong></p>
<ul>
<li>Understanding of petroleum production concepts</li>
<li>Knowledge of Python is not a must but preferred to get the full benefit.</li>
<li>The training will use the Google Collaboratory environment available in Google-Cloud for hands-on exercises</li>
<li>Trainees will need to bring a computer with a Google Chrome browser and a Google email account (available for free)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has over 35 years' work-experience in multiphase flow, artificial lift, real-time production optimization and software development/management. His current work is focused on a variety of use cases like failure prediction, virtual flow rate determination, wellhead integrity surveillance, corrosion, equipment maintenance, DTS/DAS interpretation. He has worked for national oil companies, majors, independents, and service providers globally. He has multiple patents and has delivered a multitude of industry presentations. Twice selected as an SPE distinguished lecturer, he also volunteers on SPE committees. He holds a Bachelor's and Master's in chemical engineering from the Gujarat University and IIT-Kanpur, India; and a Ph.D. in Petroleum Engineering from the University of Tulsa, USA.</p>
<p><strong>Highlighted Work Experience: </strong></p>
<ul>
<li>At Weatherford, consulted with clients as well as directed teams on digital oilfield solutions including LOWIS - a solution that was underneath the production operations of Chevron and Occidental Petroleum across the globe.</li>
<li>Worked with and consulted on equipment's like field controllers, VSDs, downhole permanent gauges, multiphase flow meters, fibre optics-based measurements.</li>
<li>Shepherded an enterprise-class solution that is being deployed at a major oil and gas producer for production management including artificial lift optimization using real time data and deep-learning data analytics.</li>
<li>Developed a workshop on digital oilfield approaches for production engineers.</li>
</ul>
<p><strong>Patents:</strong></p>
<ul>
<li>Principal inventor: 'Smarter Slug Flow Conditioning and Control'</li>
<li>Co-inventor: 'Technique for Production Enhancement with Downhole Monitoring of Artificially Lifted Wells'</li>
<li>Co-inventor: 'Wellbore real-time monitoring and analysis of fracture contribution'</li>
</ul>
<p><strong>Worldwide Experience in Training / Seminar / Workshop Deliveries:</strong></p>
<ul>
<li>Besides delivering several SPE webinars, ALRDC and SPE trainings globally, he has taught artificial lift at Texas Tech, Missouri S&amp;T, Louisiana State, U of Southern California, and U of Houston.</li>
<li>He has conducted seminars, bespoke trainings / workshops globally for practicing professionals:
<ul>
<li><u>Companies:</u> Basra Oil Company, ConocoPhillips, Chevron, EcoPetrol, Equinor, KOC, ONGC, LukOil, PDO, PDVSA, PEMEX, Petronas, Repsol, , Saudi Aramco, Shell, Sonatrech, QP, Tatneft, YPF, and others.</li>
<li><u>Countries:</u> USA, Algeria, Argentina, Bahrain, Brazil, Canada, China, Croatia, Congo, Ghana, India, Indonesia, Iraq, Kazakhstan, Kenya, Kuwait, Libya, Malaysia, Oman, Mexico, Norway, Qatar, Romania, Russia, Serbia, Saudi Arabia, S Korea, Tanzania, Thailand, Tunisia, Turkmenistan, UAE, Ukraine, Uzbekistan, Venezuela.</li>
<li>Virtual training provided for PetroEdge, ALRDC, School of Mines, Repsol, UEP-Pakistan, and others since pandemic.</li>
</ul>
</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Data Analytics Workflows for Artificial Lift, Production and Facility Engineers

Kuala Lumpur

<section style="color: rgb(33, 37, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(33, 37, 41);"><h2 style="color: rgb(62, 57, 52); box-sizing: border-box;" fr-original-style=" color: rgb(62, 57, 52);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">About this Training Course</strong></h2><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The oil and gas industry has specific accounting and disclosure requirements for exploration, development and production activities. IFRS 6 Exploration for and Evaluation of Mineral Resources provides some guidance for the entities in the extractive industry. This 3-day training covers the impact of diverse accounting practices for upstream business, accounting issues in development and production stage, and the disclosures in relation to oil &amp; gas companies reserves. In addition, this training covers the principles in relation to leases, joint arrangements, revenue recognition and hedging. This training covers the specific standards that are key to the preparation and analysis of oil and gas entity&rsquo;s financial statements.</p></section><section style="color: rgb(33, 37, 41); box-sizing: border-box;" fr-original-style=" color: rgb(33, 37, 41);"><a data-toggle="collapse" href="https://petroedgeasia.net/training/ifrs-accounting-for-the-oil-and-gas-sector/#collapseOne" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">TRAINING OBJECTIVES</strong></a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To enable participants to obtain an in-depth understanding of the IFRS financial statements of oil and gas companies:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Learn the terminology and appreciate the financial reporting considerations in IFRS financial statements of oil and gas companies</li><li fr-original-style="" style="box-sizing: border-box;">Interpret and apply relevant accounting policies and standards (IFRS 6 Exploration for and Evaluation of Mineral Resources, IAS 16 Property, Plant and Equipment, IAS 38 Intangible Assets, IAS 36 Impairment of Assets), including analysis of issues in exploration, drilling, development and production stages</li><li fr-original-style="" style="box-sizing: border-box;">Apply the key accounting principles in IFRS 15 Revenue, IFRS 16 Leases and those in relation to hedge accounting in IFRS 9 Financial Instruments</li><li fr-original-style="" style="box-sizing: border-box;">Review the accounting for joint arrangements, production sharing contracts and conveyances</li><li fr-original-style="" style="box-sizing: border-box;">Examine the disclosures in financial statements including those relating to reserve data and supplemental disclosures</li><li fr-original-style="" style="box-sizing: border-box;">Evaluate and interpret IFRS financial statements of oil and gas companies</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/ifrs-accounting-for-the-oil-and-gas-sector/#collapseTwo" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">TARGET AUDIENCE</strong></a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The course is useful for preparers and users of IFRS financial statements of oil and gas companies, including those seeking a comprehensive understanding of the key IFRS accounting issues in the industry. This includes staff in finance, treasury, operations, internal and external auditors, analysts, senior management and executives.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">A basic understanding of financial statements under any GAAP is a pre-requisite.</p></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/ifrs-accounting-for-the-oil-and-gas-sector/#collapsecl" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">COURSE LEVEL</strong></a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Intermediate</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/ifrs-accounting-for-the-oil-and-gas-sector/#collapseThree" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">TRAINING METHODS</strong></a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The training course will be delivered in Kuala Lumpur, Malaysia. The training course is presented in an interactive workshop format that allows discussion. The course will be delivered through analysis of case studies and running example problems.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Course Duration: 3 days in total.</p></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/ifrs-accounting-for-the-oil-and-gas-sector/#collapseFive" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">TRAINER</strong></a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your expert course leader is a London based financial trainer and consultant. He has designed and facilitated workshops for finance and non-finance professionals from over 50 countries in Europe, Middle East, Africa and Asia. He has spent considerable time working, advising and training in matters relating to international financial reporting and analysis (IFRS/IPSAS), including technical updates and delivered workshops for organisations in different sectors including oil &amp; gas, banking, insurance, public sector, professional services firms and educational institutions.&nbsp;He specialises in international financial reporting and analysis (IFRS/IPSAS).</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">He has written material on IFRS Accounting for the Institute of Chartered Accountants in England and Wales (ICAEW) and was invited by the International Auditing and Assurance Standards Board&reg; (IAASB&reg;) to present on IFRS 9 Financial Instruments at their board meeting in New York. In addition, he has spoken at conferences and events organised by professional bodies and management associations.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">He has previously worked with Lloyds Bank and Ernst &amp; Young in London. In addition to being a Chartered Accountant (India), Saket holds IFRS certificate from the Institute of Chartered Accountants in England and Wales (ICAEW). He was awarded a full scholarship for MSc in Multinational Accounting and Financial Management in the UK. He is a CFA&reg; charterholder.</p></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/ifrs-accounting-for-the-oil-and-gas-sector/#collapseCS" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">POST TRAINING COACHING SUPPORT (OPTIONAL)</strong></a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &ldquo;One to One&rdquo; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;"><a href="mailto:info@asiaedge.net?subject=Request%20for%20further%20information%20regarding%20post%20training%20coaching%20support" target="_blank" style="color: rgb(0, 123, 255); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 123, 255);">Request for further information post training support</a>&nbsp;and fees applicable</p></div></section>

Accounting & Finance

Gain expertise in IFRS accounting for the oil and gas sector with our industry-focused training course. Enroll today with EnergyEdge.

IFRS Accounting for the Oil and Gas Sector

<div fr-original-style="" style="box-sizing: border-box;">
<br fr-original-style="" style="box-sizing: border-box;"></div>
<section fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<h2 fr-original-style="" style="box-sizing: border-box;">About this training course</h2>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This 3-days training will provide a comprehensive review of integrity of wells exposed to carbon dioxide (CO2) in the context of Carbon Capture Utilization for enhanced oil recovery and Storage (CCUS). CO2 geological storage is a proven technology to reduce greenhouse gas emissions from sources such as coal power plants, cement kilns and steel mills. Wells are widely considered the most critical containment element, especially older wells that are not used to inject CO2 or monitor the plume evolution in the storage reservoir. The main reason for this perceived risk is the high corrosion rate of carbon steel when exposed to wet CO2, and the tendency of Portland cement to react with the gas.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The training course advanced contents build on 15 years&#39; experience in carbon storage, both in the development and deployment of technologies. First-hand, in-depth knowledge of the subject will allow us to debunk myths and focus on the real challenges of wells encountering CO2.</p>
</div>
</section>
<section fr-original-style="" style="box-sizing: border-box;">
<div id="accordion" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Objectives 

</div>
<div id="collapseOne" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">After the completion of this training course, participants will be able to:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Explain the CCUS market drivers</li>
<li fr-original-style="" style="box-sizing: border-box;">Examine the behavior of CO2, on surface and in the reservoir</li>
<li fr-original-style="" style="box-sizing: border-box;">Diagnose cement defects and design repairs</li>
<li fr-original-style="" style="box-sizing: border-box;">Understand the limits of Portland cement</li>
<li fr-original-style="" style="box-sizing: border-box;">Assess the benefits of different technologies and materials</li>
<li fr-original-style="" style="box-sizing: border-box;">Realize why geology is a dominant factor in cement performance</li>
<li fr-original-style="" style="box-sizing: border-box;">Critically choose the most appropriate monitoring techniques</li>
<li fr-original-style="" style="box-sizing: border-box;">Classify aging processes of cement, steel, and rock when exposed to CO2</li>
<li fr-original-style="" style="box-sizing: border-box;">Assess the risk of existing wells if they encounter the CO2 plume</li>
<li fr-original-style="" style="box-sizing: border-box;">Examine recent advances in real-time approaches to the production monitoring and lift management</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Target Audience 

</div>
<div id="collapseTwo" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This training course is suitable and will greatly benefit:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">All surface technical personnel such as process engineers &amp; technologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Facility engineers, production engineers &amp; technologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Drilling engineers and Well engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Design engineers and Integrity engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">P&amp;A engineers and Cementing engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Geologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Senior management executives will benefit from this training as covers an overview of the technical and commercial details of CO2 capture technologies and risks involved.</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Course Level 

</div>
<div id="collapsecl" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Intermediate</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Methods 

</div>
<div id="collapseThree" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.</span></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Course Duration: 3 days in total (21 hours).</span></em></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Training Schedule</span></strong></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">0830 - Registration </span><span fr-original-style="" style="box-sizing: border-box;">0900 - Start of training </span><span fr-original-style="" style="box-sizing: border-box;">1030 - Morning Break </span><span fr-original-style="" style="box-sizing: border-box;">1045 - Training recommences </span><span fr-original-style="" style="box-sizing: border-box;">1230 - Lunch Break </span><span fr-original-style="" style="box-sizing: border-box;">1330 - Training recommences </span><span fr-original-style="" style="box-sizing: border-box;">1515 - Evening break </span><span fr-original-style="" style="box-sizing: border-box;">1530 - Training recommences </span><span fr-original-style="" style="box-sizing: border-box;">1700 - End of Training</span></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">The maximum number of participants allowed for this training course is 20.</span></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This course is also available through our Virtual Instructor Led Training (VILT) format.</p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Trainer

</div>
<div id="collapseFive" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your expert course leader is an engineer with a passion for well integrity and possesses 28 years of international experience in field operations, technology development and management in the oil &amp; gas and carbon storage sectors. Since 2018 he is program chair of the Well Integrity Technical Section of the Society of Petroleum Engineers (SPE). He is also author or co-author of 31 technical papers, a book chapter on CO2 geological storage and 7 patent applications. He delivers training on well integrity, plug and abandonment, asset integrity, risk management and QHSE across the Eastern Hemisphere, and carries out active research on harnessing geological barriers, modeling leaks through cement, and quantifying methane emissions from oil &amp; gas wells. He has extensive expertise in: Well integrity, cementing, corrosion, upstream oil &amp; gas (drilling, completion), carbon capture and storage, mathematical modeling, risk management, reliability, HSSE (health/safety/security/environment), asset integrity, management systems, sustainable development, project management, portfolio management, training, and technology development and innovation. He has personally worked on CCS projects in Europe (France, Germany, Netherlands, Norway), Algeria, Japan and USA.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Partial list of companies that have benefited from the trainer&#39;s expertise: </strong></p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Vermilion Energy</li>
<li fr-original-style="" style="box-sizing: border-box;">Geostock</li>
<li fr-original-style="" style="box-sizing: border-box;">Aker BP</li>
<li fr-original-style="" style="box-sizing: border-box;">Shell</li>
<li fr-original-style="" style="box-sizing: border-box;">Statoil</li>
<li fr-original-style="" style="box-sizing: border-box;">ENI</li>
<li fr-original-style="" style="box-sizing: border-box;">TNO</li>
<li fr-original-style="" style="box-sizing: border-box;">Geogreen</li>
<li fr-original-style="" style="box-sizing: border-box;">Wintershall</li>
<li fr-original-style="" style="box-sizing: border-box;">Archer</li>
<li fr-original-style="" style="box-sizing: border-box;">INA and many more</li>
</ul>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Recent CCS consulting track record:</strong></p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Schlumberger</li>
<li fr-original-style="" style="box-sizing: border-box;">Total</li>
<li fr-original-style="" style="box-sizing: border-box;">Oxand</li>
<li fr-original-style="" style="box-sizing: border-box;">TNO</li>
<li fr-original-style="" style="box-sizing: border-box;">THREE60 Energy and others</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &#39;One to One&#39; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;">
Request for further information post training support and fees applicable</p>
</div>
</div>
</div><div fr-original-style="" style="box-sizing: border-box;"><div fr-original-style="" style="box-sizing: border-box;">

<br fr-original-style="" style="box-sizing: border-box;"></div>
<div id="collapseSeven" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
               </div>
</div>
</div>
</div>
</section>

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

Nottinghamshire

<p style="color: rgb(106, 106, 106); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Overview</strong></p><p style="color: rgb(106, 106, 106); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">The Level 3 NVQ Diploma in Supervising Licensed Asbestos Removal is a qualification  that covers the practical skills and underpinning knowledge required by a supervisor in  order to oversee the safe removal of licensed asbestos from a workplace.&nbsp;</p><p style="color: rgb(106, 106, 106); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">The objective of this qualification is to provide learners with the knowledge and skills to  ensure that the plan of work for removal of licensed asbestos is followed safely with the  resources provided and completed to the work schedule and budget.</p><p style="color: rgb(106, 106, 106); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&nbsp;Learners will be  able to supervise the setting up and removal of enclosures, removal and safe disposal of  licensed asbestos and co-ordinate and organise all of the activities on site required for  licensed asbestos removal.&nbsp;</p><p style="color: rgb(106, 106, 106); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">The qualification consists of seven mandatory units and three option units. Learners are  required to take two of the option units together with all of the mandatory units in order to  achieve the qualification.&nbsp;</p><p style="color: rgb(106, 106, 106); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">The units are:&nbsp;</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">Installing and Removing Licensed Asbestos Enclosure or Containment Areas in the  Workplace (Mandatory)</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&nbsp;Removing Licensed Asbestos in the Workplace (Mandatory)</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&nbsp;Repairing or Encapsulating Asbestos-Containing Materials in the Workplace (Optional)</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&nbsp;Confirming the Occupational Method of Work in the Workplace (Mandatory)&nbsp;</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">Confirming work activities and resources for an occupational work area in the workplace (Mandatory)</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&nbsp;Confirming Work Meets Contractual, Industry and Manufacturer&rsquo;s Standards in the  Workplace (Optional)&nbsp;</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&copy; RSPH 2019 2 Co-ordinating and Organising Work Operations in the Workplace (Mandatory)</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&nbsp;Developing and maintaining professional working relationships in the workplace (Mandatory)</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">&nbsp;Implementing and Maintaining Health, Safety, Environmental and Welfare Practices in  the Workplace (Mandatory)&nbsp;</li><li style="color: rgb(106, 106, 106); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(106, 106, 106);">Monitoring Progress of Work Against Schedules in the Workplace (Optional)</li></ul><p style="color: rgb(106, 106, 106); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(106, 106, 106);"><br fr-original-style="" style="box-sizing: border-box;"></p>

Dynamic Training and Assessments Ltd

Construction

Asbestos

Level 3 Diploma in Supervising Licensed Asbestos Removal

General admission

<p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">COURSE INFORMATION</strong></span></p><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">To provide knowledge and understanding in the following areas:</p><ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operative</li><li fr-original-style="" style="box-sizing: border-box;">State the definition of manual handling, the main causes of manual handling injuries and the reasons for manual handling training</li><li fr-original-style="" style="box-sizing: border-box;">Describe the function and shape of the human spine</li><li fr-original-style="" style="box-sizing: border-box;">Describe the function of the intervertebral discs</li><li fr-original-style="" style="box-sizing: border-box;">Understand the effects of static loading and the risks involved in team lifting</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate an understanding of formal and dynamic risk assessment</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for manual handling operations</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Describe and demonstrate safe handling techniques</li></ul><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Entry Requirements</h2><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Please note, that in all cases, operators are required to supply proof to support&nbsp;their application. They have to have passed the CITB health, safety &amp; environmental touch screen test within two years prior to their application.</p><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Good understanding of spoken and written English.</p>

CSCS (Construction Skills Certification Scheme)

NPORS

NPORS Manual Handling (N704)

<div fr-original-style="" style="box-sizing: border-box;">
</div>
<section fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<h2 fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">About this Training Course</strong></h2>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">In our pursuit to discover oil &amp; gas in deeper horizons, wells are often drilled in a HPHT environment. To be considered a HPHT well, the downhole conditions will have pressures in excess of 10,000 psi (69 MPa) and 300&Acirc;&deg; F (150&Acirc;&deg; C). To drill these usually expensive wells successfully, the planning and execution phase has to be of an exceptionally high standard. Therefore, both operator and drilling/service contractor staff must be seamlessly aligned and work as a coherent team to reach and then harness the well objectives. This is particularly important when speciality services such as Managed Pressure Drilling (MPD) are being applied with crews and/or supervisors who are not intricately familiar with complicated well control incidents. As we seek to prevent costly non-productive time, attention will also be paid to enabling technologies like expandable solid tubulars, mud coolers and specialty mud.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The 3 full-day course will explain the key characteristics and challenges of HPHT Planning and Well Control. This includes:</p>
<ol fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Differences between HPHT and standard (conventional) wells and what this entails for well design.</li>
<li fr-original-style="" style="box-sizing: border-box;">The challenges unique to HPHT and the impact of Pore Pressure Prediction (PPP).</li>
<li fr-original-style="" style="box-sizing: border-box;">Static and Dynamic Equivalent Mud Density and the factors that influence the ultimate Bottom Hole Pressure (BHP).</li>
<li fr-original-style="" style="box-sizing: border-box;">Control practices such as &#39;fingerprinting&#39; to identify what&#39;s happening downhole.</li>
<li fr-original-style="" style="box-sizing: border-box;">HPHT shut-in procedures and practices.</li>
<li fr-original-style="" style="box-sizing: border-box;">Specific HPHT equipment and drilling tool requirements and advantages of Managed Pressure Drilling (MPD).</li>
<li fr-original-style="" style="box-sizing: border-box;">Well control on/off bottom, bull-heading and dealing with kick-loss situations.</li>
<li fr-original-style="" style="box-sizing: border-box;">Mud management, tolerance on mud properties and challenges in cementing.</li>
<li fr-original-style="" style="box-sizing: border-box;">Case history on emergency control.</li>
<li fr-original-style="" style="box-sizing: border-box;">Drills, team effort, checklists, human factor and &#39;getting everybody on board&#39;.</li>
</ol>
</div>
</section>
<section fr-original-style="" style="box-sizing: border-box;">
<div id="accordion" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Objectives 

</div>
<div id="collapseOne" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">By the end of this course, participants will be able to:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Recognize the main differences in planning/design between HPHT and standard (conventional) wells as well as the challenges that will have to be faced.</li>
<li fr-original-style="" style="box-sizing: border-box;">Explain drilling and tripping operational challenges and practices as well as how to manage these effectively.</li>
<li fr-original-style="" style="box-sizing: border-box;">Identify wellbore breathing (a.k.a. ballooning) and how to safely deal with this within the narrow window for mud density selection.</li>
<li fr-original-style="" style="box-sizing: border-box;">Apply practices of consistent fingerprinting and how to develop procedures for this to benefit the rig team.</li>
<li fr-original-style="" style="box-sizing: border-box;">Measure and understand bottom hole pressure and the effect of influencing factors such as temperature, rotation and flow rate.</li>
<li fr-original-style="" style="box-sizing: border-box;">Understand the critical mud properties to alleviate barite sag, general mud density control techniques and specify the essentials in cementing.</li>
<li fr-original-style="" style="box-sizing: border-box;">Manage losses and low fracture gradients with well bore strengthening methods.</li>
<li fr-original-style="" style="box-sizing: border-box;">Execute sound HPHT shut-in procedures.</li>
<li fr-original-style="" style="box-sizing: border-box;">Understand how MPD can assist in the safe and efficient drilling and hole cleaning of HPHT wells.</li>
<li fr-original-style="" style="box-sizing: border-box;">Understand the use of MPD Influx Management Envelopes.</li>
<li fr-original-style="" style="box-sizing: border-box;">Identify critical Early Kick Detection Systems (EKDS) and HPHT well control equipment.</li>
<li fr-original-style="" style="box-sizing: border-box;">Execute safe secondary well control practices in a H2S environment, bull-heading, on and off bottom and handling of gas at surface, using MGS and hydrate mitigation measures.</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Target Audience 

</div>
<div id="collapseTwo" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The course is intended for:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Office-based staff engaged in HPHT well planning and day-to-day operations</li>
<li fr-original-style="" style="box-sizing: border-box;">Field-based rig staff working as front-line supervisors - from Assistant Drillers to Senior Toolpushers</li>
<li fr-original-style="" style="box-sizing: border-box;">Field-based rig staff working for service companies supporting the execution of HPHT wells (MPD, mud and mudlogging services etc.)</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Trainer

</div>
<div id="collapseFive" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your expert course leader has over 45 years of experience in the Oil &amp; Gas industry. During that time, he has worked exclusively in the well engineering domain. After being employed in 1974 by Shell, one of the major oil &amp; gas producing operators, he worked as an apprentice on drilling rigs in the Netherlands. After a year, he was sent for his first international assignment to the Sultanate of Oman where he climbed up the career ladder from Assistant Driller, to Driller, to wellsite Petroleum Engineer and eventually on-site Drilling Supervisor, actively engaged in the drilling of development and exploration wells in almost every corner of this vast desert area. At that time, drilling techniques were fairly basic and safety was just a buzz word, but such a situation propels learning and the fruits of &#39;doing-the-basics&#39; are still reaped today when standing in front of a class.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">After some seven years in the Middle East, a series of other international assignments followed in places like the United Kingdom, Indonesia, Turkey, Denmark, China, Malaysia, and Russia. Apart from on-site drilling supervisory jobs on various types of drilling rigs (such as helicopter rigs) and working environments (such as jungle and artic), he was also assigned to research, to projects and to the company&#39;s learning centre. In research, he was responsible for promoting directional drilling and surveying and advised on the first horizontal wells being drilled, in projects, he was responsible for a high pressure drilling campaign in Nigeria while in the learning centre, he looked after the development of new engineers joining the company after graduating from university. He was also involved in international well control certification and served as chairman for a period of three years. In the last years of his active career, he worked again in China as a staff development manager, a position he nurtured because he was able to pass on his knowledge to a vast number of new employees once again.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">After retiring in 2015, he has delivered well engineering related courses in Australia, Indonesia, Brunei, Malaysia, China, South Korea, Thailand, India, Dubai, Qatar, Kuwait, The Netherlands, and the United States. The training he provides includes well control to obtain certification in drilling and well intervention, extended reach drilling, high pressure-high temperature drilling, stuck pipe prevention and a number of other ad-hoc courses. He thoroughly enjoys training and is keen to continue taking classes as an instructor for some time to come.</p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &#39;One to One&#39; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;">
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Accreditions And Affliations

</div>
<div id="collapseSeven" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
               </div>
</div>
</div>
</div>
</section>

HPHT Planning and Well Control

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>The drill string is the simplest piece of equipment in use on a drilling rig and at the same time, the most critical piece. We use the qualifier 'basic' because although 99% of the drill string comprises plain tubes that are just screwed together, the lowest section, just above the bit, can go to extreme loading and is fitted with highly sophisticated electronics packages providing both positional and lithological data as well as a steering system to drive and orient the bit.</p>
<p>The principle tasks of the drill string are also deceptively simple. These are to:</p>
<ol>
<li>Convey each drill bit to the bottom of the hole and then to retrieve it when worn,</li>
<li>Act as a conduit to convey drilling fluid at high pressure down to the bit and</li>
<li>Transmit torque from surface to bit, occasionally in concert with a hydraulic motor to drive this bit.</li>
</ol>
<p>This 3 full-day course will cover in detail what it takes to decide on minimum drill string specifications, which are able to support the loads to which it will be subjected. In addition to the need to use a drill string with minimum strength requirements, we also need to ensure that we can prevent drill string failure. If the failure consists of a small split or leak of any kind, then the time involved may be little more than that required for a roundtrip to change the bit. If the string parts, then the recovery is likely to take a considerable amount of time. In a worst case scenario, the fish in the hole may prove impossible to retrieve, requiring a sidetrack.</p>
<p>A less than optimal design of the string will reduce the efficiency of the operation and almost always leads to premature bit wear. This is particularly true when we are unable to measure and control the dynamics of the drill string as a whole and the bottomhole assembly in particular. Axial vibrations, torsional vibrations and lateral vibrations may take place in various degrees of severity. The behaviour of the drill string while operating under torsional vibrations is thought to be of great importance and may result in torsional buckling.</p>
<p>This course will also cover the drilling optimization limiters, how to identify them and how to remove them. This is done by understanding the drill string dynamics - by operating under the most favourable conditions and by measuring the dynamics in the vicinity of the bit (or at the bit) in order to make timely adjustments.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>The course homes in what office staff needs to know and plan for and what field staff needs to know and implement. By the end of this course, participants will be familiar with:</p>
<ul>
<li>Critical dimensions of common drill pipe and weld-on tool joints and its relation to yield for calculation of tensile, torsional and burst resistance.</li>
<li>Make-up torque of connections that relate to the tool joint dimensions and the torsional strength of that connection.</li>
<li>Use of design factors and safety factors on tensile and torsional strength in relation to new and worn state. Conditions which could lead to drill pipe collapse.</li>
<li>Situations where limitations on sinusoidal (snake) and helical buckling will apply and the influence of radial clearance and deviation.</li>
<li>Failure of drill pipe (fatigue) and the circumstances under which these would occur (rotation across doglegs, pipe in compression etc).</li>
<li>Mechanism under which hardbanding would induce casing wear and the methods applied to measure and prevent any significant wear.</li>
<li>Drill pipe inspection methods we apply to identify early flaws/cracks/corrosion, to measure dimensions, to inspect tool joints etc.</li>
<li>Common BHA components, including heavy wall drill pipe, their external/internal dimensions, connections (API, proprietary) and appearance (such as spiral).</li>
<li>Significance of thread compounds to ensure the correct make-up torque is applied.</li>
<li>Significance of drill string/BHA 'neutral point' in the context of drill string component failure.</li>
<li>Basic design principles for a BHA make-up in a vertical, low/medium deviated and highly deviated well in terms of weight transfer and drag/torque.</li>
<li>Stabilization principles for a pendulum (vertical), a stabilized (vertical or tangent), a build and a drop-off assembly.</li>
<li>BHA design and stabilization in relation to mitigation/elimination of vibration and to the elimination of tension, torsion or fatigue failure.</li>
<li>Matching bit aggressiveness, gauge length, BHA stabilization, steerability and Mechanical Specific Energy (MSE) to mitigate the severity of any vibration.</li>
<li>Bit efficiency and reduction of wear by understanding mechanical and hydraulic limiters. How to perform a passive or active drill-off test.</li>
<li>Importance of being conversant with API 7G RP and/or equivalent data books, to look up/check the recommended tensile/torque and other parameters for the drill string in use.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is intended for <strong>staff directly or indirectly involved in the delivery of challenging wells such as junior to senior well engineers, both in office-based planning and operations and field-based operator/contractor supervisory staff such as company men and toolpushers.</strong></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has over 45 years of experience in the Oil &amp; Gas industry. During that time, he has worked exclusively in the well engineering domain. After being employed in 1974 by Shell, one of the major oil &amp; gas producing operators, he worked as an apprentice on drilling rigs in the Netherlands. After a year, he was sent for his first international assignment to the Sultanate of Oman where he climbed up the career ladder from Assistant Driller, to Driller, to wellsite Petroleum Engineer and eventually on-site Drilling Supervisor, actively engaged in the drilling of development and exploration wells in almost every corner of this vast desert area. At that time, drilling techniques were fairly basic and safety was just a buzz word, but such a situation propels learning and the fruits of 'doing-the-basics' are still reaped today when standing in front of a class.</p>
<p>After some seven years in the Middle East, a series of other international assignments followed in places like the United Kingdom, Indonesia, Turkey, Denmark, China, Malaysia, and Russia. Apart from on-site drilling supervisory jobs on various types of drilling rigs (such as helicopter rigs) and working environments (such as jungle and artic), he was also assigned to research, to projects and to the company's learning centre. In research, he was responsible for promoting directional drilling and surveying and advised on the first horizontal wells being drilled, in projects, he was responsible for a high pressure drilling campaign in Nigeria while in the learning centre, he looked after the development of new engineers joining the company after graduating from university. He was also involved in international well control certification and served as chairman for a period of three years. In the last years of his active career, he worked again in China as a staff development manager, a position he nurtured because he was able to pass on his knowledge to a vast number of new employees once again.</p>
<p>After retiring in 2015, he has delivered well engineering related courses in Australia, Indonesia, Brunei, Malaysia, China, South Korea, Thailand, India, Dubai, Qatar, Kuwait, The Netherlands, and the United States. The training he provides includes well control to obtain certification in drilling and well intervention, extended reach drilling, high pressure-high temperature drilling, stuck pipe prevention and a number of other ad-hoc courses. He thoroughly enjoys training and is keen to continue taking classes as an instructor for some time to come.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Drill String Design & Drilling Optimization

<section style="color: rgb(33, 37, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(33, 37, 41);"><h2 style="color: rgb(62, 57, 52); box-sizing: border-box;" fr-original-style=" color: rgb(62, 57, 52);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">About this Training Course</strong></h2><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">As a result of major incidents such as the Buncefield storage depot explosion in the UK, it is now expected that achieving tolerable risk is justified by a rigorous method. The method &ndash; Layer of Protection Analysis (LOPA) &ndash; will assist organisations with the analysis and assessment of identified process plant hazards.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This method can answer key questions like &lsquo;Do we have enough controls?&rsquo; or &lsquo;Are they sufficiently effective?&rsquo; It is often used as a follow-up to a HAZOP study to confirm the qualitative judgement and decisions made by the team. It is considered to be a semi-quantitative technique since it uses &lsquo;order of magnitude&rsquo; estimates of risk reduction of each protection layer and is therefore less time-consuming than using Fully Quantified Risk Analysis (QRA).</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This 2 full-day course will equip participants with an understanding of how a hazard scenario is defined and its severity is categorized to set a tolerable frequency. The participants will learn to determine how many Independent Protection Layers (IPL) are required to achieve the tolerable frequency, and how to specify an IPL.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">All of these activities are covered by a tutored exercise and group work. Only simple numeracy skills with an understanding of scientific notation, for example, one in a thousand expressed as 1.0E-03, are required. The course materials will include a copy of the presentation slides, comprehensive notes and recommended further reading. Teaching will be delivered via 2 full-days, with informative videos and plenty of opportunities to ask questions.</p></section><section style="color: rgb(33, 37, 41); box-sizing: border-box;" fr-original-style=" color: rgb(33, 37, 41);"><a data-toggle="collapse" href="https://petroedgeasia.net/training/layer-of-protection-analysis-lopa-classroom-training/#collapseOne" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TRAINING OBJECTIVES</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">By the end of this course, the participants will have an understanding of:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">The role of LOPA in technical risk management</li><li fr-original-style="" style="box-sizing: border-box;">LOPA methodology and its application</li><li fr-original-style="" style="box-sizing: border-box;">When to use LOPA</li><li fr-original-style="" style="box-sizing: border-box;">What Safety Integrity Level (SIL) is required for a hazard scenario</li><li fr-original-style="" style="box-sizing: border-box;">How to define an Independent Protection Layer (IPL)</li><li fr-original-style="" style="box-sizing: border-box;">The lifecycle process of Functional Safety</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">and they will be able to:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Use SIL determination to screen out low risk scenarios</li><li fr-original-style="" style="box-sizing: border-box;">Apply the LOPA methodology in real situations</li><li fr-original-style="" style="box-sizing: border-box;">Lead a LOPA workshop and report its findings</li><li fr-original-style="" style="box-sizing: border-box;">Justify HAZOP recommendations using LOPA</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/layer-of-protection-analysis-lopa-classroom-training/#collapseTwo" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TARGET AUDIENCE</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This course is intended for:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Those who are involved in process design including process safety, process design and instrument &amp; control engineers</li><li fr-original-style="" style="box-sizing: border-box;">Those who are responsible for Technical Integrity assurance</li><li fr-original-style="" style="box-sizing: border-box;">Those who are required to lead a LOPA study</li><li fr-original-style="" style="box-sizing: border-box;">Those who are required to technically approve plant design and process safety improvements e.g. project engineers and plant managers</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Are you looking for e-learning courses instead in related topic areas?</strong></em></p><ol fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><a href="https://petroedgeasia.net/training/hazop-participants-e-learning-course/" style="color: rgb(0, 123, 255); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 123, 255);">HAZOP Participants</a></em></li><li fr-original-style="" style="box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><a href="https://petroedgeasia.net/training/introduction-to-bowties-e-learning-course/" style="color: rgb(0, 123, 255); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 123, 255);">Introduction to Bowtie</a></em></li><li fr-original-style="" style="box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><a href="https://petroedgeasia.net/training/introduction-to-process-safety-e-learning-course/" style="color: rgb(0, 123, 255); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 123, 255);">Introduction to Process Safety</a></em></li></ol></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/layer-of-protection-analysis-lopa-classroom-training/#collapseFive" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">TRAINER</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your expert course leader has 50 years&rsquo; experience in chemical and process safety engineering. His early career included 20 years in design and project engineering with various fine chemical and pharmaceutical companies where he designed chemical processes, specified plant equipment and selected materials for highly corrosive and toxic processes, often where textbook data was not available. This was followed by 10 years in offshore oil and gas design projects where he was responsible for setting up a Technical Safety group to change design safety practices in the aftermath of the 1988 Piper Alpha disaster. In recent years, he has been called upon to conduct various offshore and onshore incident investigations. His career has given him experience in project engineering, project management, process design and operations, safety engineering and risk management. He is a Fellow of the UK Institution of Chemical Engineers. He served on the Scottish Branch committee, and was elected chairman for a two-year term in 1991. He has also been chairman of the Safety and Reliability Society &ndash; North of Scotland Branch. He has delivered training courses in Process Hazard Analysis (HAZOP and HAZID), Process Safety Management, Hazard Awareness, Risk Assessment, Root Cause Analysis, Failure Modes &amp; Effect Analysis and has lectured on Reliability Analysis to the M.Sc. course in Process Safety and Loss Prevention at Sheffield University. In addition to delivering training courses, he currently facilitates HAZOP / HAZID / LOPA studies and undertakes expert witness roles advising lawyers engaged in contractual disputes, usually involving the design or construction of chemical plants or Oil &amp; Gas production facilities, or criminal prosecutions.</p></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/layer-of-protection-analysis-lopa-classroom-training/#collapseCS" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">POST TRAINING COACHING SUPPORT (OPTIONAL)</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &ldquo;One to One&rdquo; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;"><a href="mailto:info@asiaedge.net?subject=Request%20for%20further%20information%20regarding%20post%20training%20coaching%20support" target="_blank" style="color: rgb(0, 123, 255); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 123, 255);">Request for further information post training support</a>&nbsp;and fees applicable</p></div></section>

Take your knowledge to the next level with EnergyEdge course on Layer of Protection Analysis (LOPA). Enroll now to advance your career.

Layer of Protection Analysis (LOPA)

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(0, 0, 0);">Logistics real estate encompasses commercial structures meticulously tailored for the storage, handling, and distribution of goods, spanning warehouses, distribution centres, and fulfilment hubs.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">These vital infrastructures support businesses of varying scales, from local retailers to multinational manufacturers, in ensuring streamlined operations.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Our webinar will explore various facets of logistics real estate, focusing on pivotal elements like warehouses and distribution centres, and feature a model spotlighting their critical attributes.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">If you&rsquo;re eager to deepen your understanding of logistics assets, join us for this insightful session.</span></p>

Bayfield Training

Logistics real estate encompasses commercial structures meticulously tailored for the storage, handling, and distribution of goods, spanning warehouses, distribution centres, and fulfilment hubs. These vital infrastructures support businesses of varying scales, from local retailers to multinational manufacturers, in ensuring streamlined operations. Our webinar will explore various facets of logistics real estate, focusing on pivotal elements like warehouses and distribution centres, and feature a model spotlighting their critical attributes. If you’re eager to deepen your understanding of logistics assets, join us for this insightful session.

Free Webinar | Industrial/Logistics Assets – Theory and Model Showcase

General Admission

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>The primary audience for this course is any IT, facilities or data centre professional, who are involved in the design/build, renovation or relocation of a mission-critical data centre.</p>Overview<p>This 5-day course is designed to prepare participants to analyse a given business case and perform technical evaluation for a project plan and a set of designs for the implementation of a mission critical data centre.<br />The course also engages participants in product evaluations and demonstrates how to select equipment and develop equipment test scripts (IET) and integrated performance and validation testing (IPVT). CDCEÂ© builds upon knowledge gained in CDCP and CDCS courses. Participants who pass the exam will join the industry's elite data centre project design experts.<br />CDCEÂ© is the highest level training in the EPI Design and Build training track under the EPI Data Centre Training Framework. Participants must hold a valid CDCS certificate in order to be able to register for the CDCE class.</p><p>CDCEÂ© is the premier certification for data centre professionals in the data centre design/build and related fields.</p></div><div id="course-pills-2"><h4>Data Centre Life Cycle</h4><ul><li>Data centre lifecycle stages and phases<br />Exercise: Stage/Phase/Milestone/Document mapping</li></ul><h4>Design Preparation</h4><ul><li>Creation of a SON ? Statement Of Need<br />Technology review<br />Conceptual sizing<br />How to calculate for computer room space<br />How to calculate facility space<br />How to calculate incoming power<br />Exercise: Conceptual sizing building and power<br />Analysing capacity of existing facility<br />Analysing investment options<br />Site selection<br />Permits and approvals<br />Exercise: Site selection<br />Conceptual design<br />Budget and project timeline<br />Business case preparation<br />Project delivery structure<br />Project management options<br />Project manager and team</li></ul><h4>Design Planning</h4><ul><li>OSRA?Operational Systems Requirement Analysis<br />TFRA?Technical Facilities Requirement Analysis<br />Operations and maintenance review<br />RFP?Request For Proposal process<br />Vendor selection</li></ul><h4>Design Development</h4><ul><li>Project planning<br />Design development<br />PDR ? Preliminary Design Review<br />Equipment selection<br />FDR/V ? Final Design Review/Validation<br />Exercise: Full design validation of power, cooling, floor plans, fire suppression<br />Design freeze and LLTI<br />Creation of construction documents<br />BOM/BOQ ? Bill Of Material/Bill Of Quantity<br />Exercise: Equipment selection</li></ul><h4>Acquire</h4><ul><li>Requirements of purchase orders<br />Shipping terms<br />FWT/FAT ? Factory Witness Test/Factory Acceptance Test<br />Sequencing<br />Incoming goods inspection and handling<br />Asset management</li></ul><h4>Construct</h4><ul><li>Temporary essential services<br />Erection of the building<br />Permanent essential services<br />Building inspection<br />Snag list<br />COF?Certificate Of Fitness</li></ul><h4>Fit-Out</h4><ul><li>Fit-Out<br />Builders cleaning<br />As-Built Drawings</li></ul><h4>Test &amp; Commissioning</h4><ul><li>IET?Individual Equipment Test<br />IPVT/IST?Integrated Performance Verification Test/Integrated Systems Test<br />Common mistakes with IET/IPVT<br />Deep cleaning<br />Exercise: IET/IPVT scripting</li></ul><h4>Hand-Over</h4><ul><li>Facility hand-over requirements and documents<br />PCC?Practical Completion Certificate<br />DLP?Defect Liability Period<br />Defect Management<br />ICT Systems Installation<br />ICT Systems Testing<br />Hand-Over/DLP Expiry<br />FCC?Final Completion Certificate</li></ul><h4>Retirement</h4><ul><li>Reasons and definitions of retirement<br />Building the business case and project plan<br />Sequencing<br />Transfer of site<br />Demolishing of site<br />Legal matters<br />FCC?Final Completion Certificate</li></ul><h4>Exam: Certified Data Centre Expert (CDCEÂ©)</h4><ul><li>The CDCEÂ© exam is in two parts: Part A is a 90-minute closed book exam, with 60 multiple-choice questions. For Part A, the candidate requires a minimum of 45 correct answers to pass the exam. Part B is a 90-minute closed book exam, with 25 open questions. For Part B the candidate needs to obtain a minimum of 75% to pass.</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Data Centre Expert (CDCE) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Data Centre Expert (CDCE) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Nexus Human

Certified in Cybersecurity (CC)

IT Certifications

Construction Design & Management (CDM)

Cisco Certified Internetwork Expert (CCIE)

Certified in Data Protection (CDP)

Certified Cyber Professional (CCP)

Certified Data Centre Expert (CDCE)

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is for experienced information technology (IT) professionals, typically described as Enterprise Desktop Administrators (EDAs). These EDAs deploy, manage, and maintain PCs, devices, and applications across medium, large, and enterprise organizations. A significant portion of this audience uses, or intends to use, the latest release of Configuration Manager to manage and deploy PCs, devices, and applications.</p>Overview<p>Describe the features Configuration Manager and Intune include, and explain how you can use these features to manage PCs and mobile devices in an enterprise environment. Analyze data by using queries and reports. Prepare a management infrastructure, including configuring boundaries, boundary groups, and resource discovery, and integrating mobile-device management with Intune. Deploy and manage the Configuration Manager client. Configure, manage, and monitor hardware and software inventory, and use Asset Intelligence and software metering. Identify and configure the most appropriate method to distribute and manage content used for deployments. Distribute, deploy, and monitor applications for managed users and systems. Maintain software updates for PCs that Configuration Manager manages. Implement Endpoint Protection for managed PCs. Configure an operating-system deployment strategy by using Configuration Manager. Manage and maintain a Configuration Manager site.</p><p>This five-day course describes how to use Configuration Manager and its associated site systems to efficiently manage network resources. In this five-day course, you will learn day-to-day management tasks, including how to manage applications, client health, hardware and software inventory, operating system deployment, and software updates by using Configuration Manager. You also will learn how to optimize Endpoint Protection, manage compliance, and create management queries and reports.  Although this course and the associated labs are written for Microsoft Endpoint Configuration Manager and Windows 11, the skills taught will also be backwards compatible with previous editions of System Center Configuration Manager and Windows 10.</p>Prerequisites<p></p><li>Networking fundamentals, including common networking protocols, topologies, hardware, media, routing, switching, and addressing.</li>  <li>Active Directory Domain Services (AD DS) principles and fundamentals of AD DS management.</li>  <li>Installation, configuration, and troubleshooting for Windows-based personal computers.</li>  <li>Basic concepts of public key infrastructure (PKI) security.</li>  <li>Basic understanding of scripting and Windows PowerShell syntax.</li>  <li>Basic understanding of Windows Server roles and services.</li>  <li>Basic understanding of the configuration options for iOS and Android Mobile device platforms.</li><p></p></div><div id="course-pills-2"><h3>1 - Managing computers and mobile devices in the enterprise</h3> <ul> <li>Overview of systems management by using enterprise management solutions</li> <li>Overview of the Configuration Manager architecture</li> <li>Overview of the Configuration Manager administrative tools</li> <li>Tools for monitoring and troubleshooting a Configuration Manager site</li> </ul> <h3>2 - Analyzing data using queries, reports, and CMPivot</h3> <ul> <li>Introduction to queries</li> <li>Configuring SQL Server Reporting Services</li> <li>Analyzing the real-time state of a device by using CMPivot</li> </ul> <h3>3 - Preparing the Configuration Manager management infrastructure</h3> <ul> <li>Configuring site boundaries and boundary groups</li> <li>Configuring resource discovery</li> <li>Organizing resources using device and user collections</li> </ul> <h3>4 - Deploying and managing the Configuration Manager client</h3> <ul> <li>Overview of the Configuration Manager client</li> <li>Deploying the Configuration Manager client</li> <li>Configuring and monitoring client status</li> <li>Managing client settings and performing management operations</li> </ul> <h3>5 - Managing inventory for PCs and applications</h3> <ul> <li>Overview of inventory collection</li> <li>Configuring hardware and software inventory</li> <li>Managing inventory collection</li> <li>Configuring software metering</li> <li>Configuring and managing Asset Intelligence</li> </ul> <h3>6 - Distributing and managing content used for deployments</h3> <ul> <li>Preparing the infrastructure for content management</li> <li>Distributing and managing content on distribution points</li> </ul> <h3>7 - Deploying and managing applications</h3> <ul> <li>Overview of application management</li> <li>Creating applications</li> <li>Deploying applications</li> <li>Managing applications</li> <li>Deploying and managing Windows apps</li> </ul> <h3>8 - Maintaining software updates for managed PCs</h3> <ul> <li>The software updates process</li> <li>Preparing a Configuration Manager site for software updates</li> <li>Managing software updates</li> <li>Configuring automatic deployment rules</li> <li>Monitoring and troubleshooting software updates</li> <li>Enabling third-party updates</li> </ul> <h3>9 - Implementing Defender Protection for managed PCs</h3> <ul> <li>Overview of Endpoint Protection in Configuration Manager</li> <li>Configuring, deploying, and monitoring Endpoint Protection policies</li> <li>Configuring and deploying advanced threat policies</li> <h3>10 - Managing compliance and secure data access</h3> <ul> <li>Overview of Compliance Settings</li> <li>Configuring compliance settings</li> <li>Viewing compliance results</li> <li>Managing resource and data access</li> <h3>11 - Managing operating system deployment</h3> <ul> <li>An overview of operating system deployment</li> <li>Preparing a site for operating system deployment</li> <li>Deploying an operating system</li> <li>Managing Windows as a service</li> <h3>12 - Managing and maintaining a Configuration Manager site</h3> <ul> <li>Configuring role-based administration</li> <li>Configuring Remote Tools</li> <li>Overview of Configuration Manager site maintenance and Management Insights</li> <li>Backing up and recovering a Configuration Manager site</li> <li>Updating the Configuration Manager infrastructure</li> <h3>13 - What?s new in Microsoft Endpoint Configuration Manager</h3> <ul> <li>Whats new in Microsoft Endpoint Manager covering each semi annual release</li> </ul></ul></ul></ul></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans 55348: Administering Microsoft Endpoint Configuration Manager training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the 55348: Administering Microsoft Endpoint Configuration Manager course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Microsoft Certification

Sccm

Microsoft Certified Technology Specialist (MCTS)

Commercial & Contract Management Certification Program (CCM)

IT Manager

Microsoft Certified Trainer (MCT)

55348 Administering Microsoft Endpoint Configuration Manager

Tom Reynolds

Product Management

Agile

Agile PM

Productivity

Kanban

Agile Coach

Attend our world class Kanban University accredited Certified Kanban System Design training course and learn to implement Kanban in your company

Certified Kanban System Design – KMP I - 24-26 September

Standard

Early Bird

<p data-key="34" id="isPasted" style="color: rgb(97, 97, 97); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(97, 97, 97);"><span data-key="35" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Our STGO Awareness Training</strong></span></p><p data-key="36" style="color: rgb(97, 97, 97); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(97, 97, 97);"><span data-key="37" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">STGO Awareness Training is for drivers and operators who carry abnormal loads and covers the legislation around the carriage of abnormal loads, the rules and regulations relating to all aspects of this as well as the potential difficulties drivers and operators face when carrying this type of cargo.&nbsp;</span></p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" id="isPasted" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">STGO Regulations and Compliance:</strong></p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">In-depth exploration of STGO regulations and legal requirements.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Understanding the specific permits and approvals needed for special transport.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Compliance with weight limits, dimensions, and route restrictions.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;"><span style="font-family: Arial, sans-serif; box-sizing: border-box;" fr-original-style="font-family: Arial, sans-serif;">►<span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&nbsp;</strong></span></span><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Escort Vehicles and Their Role:</strong></span></p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Overview of the purpose and responsibilities of escort vehicles in special transport.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Detailed examination of escort vehicle equipment and communication systems.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Techniques for effective coordination between the main transport vehicle and escort vehicles.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;"><span style="font-family: Arial, sans-serif; box-sizing: border-box;" fr-original-style="font-family: Arial, sans-serif;">►<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&nbsp;</strong></span><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Safe Loading Practices:</strong></p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Importance of proper vehicle loading for overall safety and compliance.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Load distribution and securing methods to prevent accidents and damage.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Hands-on demonstrations and simulations for safe loading procedures.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;"><span style="font-family: Arial, sans-serif; box-sizing: border-box;" fr-original-style="font-family: Arial, sans-serif;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">►&nbsp;</strong></span><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route Planning and Risk Management:</strong></p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Comprehensive understanding of route planning for STGO, considering infrastructure, traffic, and potential obstacles.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Risk assessment and mitigation strategies to ensure safe transportation.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;"><span style="font-family: Arial, sans-serif; box-sizing: border-box;" fr-original-style="font-family: Arial, sans-serif;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">►&nbsp;</strong></span><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Emergency Response and Incident Management:</strong></p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Training on emergency procedures in case of accidents or unforeseen events.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Development of incident response plans to handle emergencies effectively.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">&nbsp;</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Certification and Assessment:</strong></p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Participants will undergo assessments to evaluate their understanding of the course material.</p><p style="margin: 0cm; font-size: medium; font-family: Calibri, sans-serif; color: rgb(0, 0, 0); font-style: normal; font-weight: normal; text-align: start; text-indent: 0px; text-decoration: none; box-sizing: border-box;" fr-original-style="margin: 0cm;font-size: medium;font-family: Calibri, sans-serif;color: rgb(0, 0, 0);font-style: normal;font-weight: normal;text-align: start;text-indent: 0px;text-decoration: none;">Successful completion will result in a certification demonstrating competency in STGO awareness, escort vehicle operations, and safe loading practices. This online course is ideal for professionals involved in the transportation industry, logistics, and anyone seeking to enhance their expertise in the safe and legal handling of special transport and goods overseeing. Participants will leave with the knowledge and skills necessary to contribute to the efficient and secure transportation of oversized or special goods.<span data-key="37" fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Course delivered Online</span></span></p><p data-key="36" style="color: rgb(97, 97, 97); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(97, 97, 97);"><span data-key="37" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">All our courses are 7 hours and count towards your 35 hours CPC Periodic Training.</strong><br fr-original-style="" style="box-sizing: border-box;"></span></p><p data-key="36" style="color: rgb(97, 97, 97); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(97, 97, 97);"><span data-key="37" fr-original-style="" style="box-sizing: border-box;"><span id="isPasted" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Course cost includes VAT and CPC upload fee.&nbsp;</strong></span><br fr-original-style="" style="box-sizing: border-box;"></span></p>

Our STGO Awareness Training
STGO Awareness Training is for drivers and operators who carry abnormal loads and covers the legislation around the carriage of abnormal loads, the rules and regulations relating to all aspects of this as well as the potential difficulties drivers and operators face when carrying this type of cargo. 
STGO Regulations and Compliance:
In-depth exploration of STGO regulations and legal requirements.
Understanding the specific permits and approvals needed for special transport.
Compliance with weight limits, dimensions, and route restrictions.
► Escort Vehicles and Their Role:
Overview of the purpose and responsibilities of escort vehicles in special transport.
Detailed examination of escort vehicle equipment and communication systems.
Techniques for effective coordination between the main transport vehicle and escort vehicles.
► Safe Loading Practices:
Importance of proper vehicle loading for overall safety and compliance.
Load distribution and securing methods to prevent accidents and damage.
Hands-on demonstrations and simulations for safe loading procedures.
► Route Planning and Risk Management:
Comprehensive understanding of route planning for STGO, considering infrastructure, traffic, and potential obstacles.
Risk assessment and mitigation strategies to ensure safe transportation.
► Emergency Response and Incident Management:
Training on emergency procedures in case of accidents or unforeseen events.
Development of incident response plans to handle emergencies effectively.
Certification and Assessment:
Participants will undergo assessments to evaluate their understanding of the course material.
Successful completion will result in a certification demonstrating competency in STGO awareness, escort vehicle operations, and safe loading practices. This online course is ideal for professionals involved in the transportation industry, logistics, and anyone seeking to enhance their expertise in the safe and legal handling of special transport and goods overseeing. Participants will leave with the knowledge and skills necessary to contribute to the efficient and secure transportation of oversized or special goods.
Course delivered Online
All our courses are 7 hours and count towards your 35 hours CPC Periodic Training.

Course cost includes VAT and CPC upload fee. 


Total Compliance 

Driving & Vehicles

Compliance & Safety

STGO Awareness/ Escort vehicles & Safe Loading of Vehicles - Online

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">In this course, you&rsquo;ll gain a basic understanding of finance and accounting concepts to drive the success of your business.</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This course aims to demystify the accounting language over three hours so that you are in control of the financial performance of your business, helping you forecast for the future, evaluate your current efforts, and establish strategies to meet your goals.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Date</strong>: Wednesday 25th September 2024</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Time</strong>: 9:30am - 12:30pm</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Location</strong>: Online</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">For</strong>: Businesses based in North Essex (Braintree, Chelmsford, Colchester, Maldon, and Tendring)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Cost</strong>: Free</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">More about the course</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Even if you plan to hire an accountant, you still need to understand accounting information to make better, more informed decisions about your business. This webinar will give you the tools necessary to have a better understanding of what the professionals are saying down the line, so you can run your business better.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What it covers</strong>:</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;">Part 1</em></p><ul fr-original-style="" style="box-sizing: border-box;"><li id="isPasted" fr-original-style="" style="box-sizing: border-box;">Historical business finance measurement</li><li fr-original-style="" style="box-sizing: border-box;">The main performance measure - Profit &amp; Loss</li><li fr-original-style="" style="box-sizing: border-box;">The main valuation measure - Balance Sheet</li><li fr-original-style="" style="box-sizing: border-box;"> The importance of cash management and working capital</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;">Part 2</em></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">How to apply this knowledge to business planning and targeting</li><li fr-original-style="" style="box-sizing: border-box;">Using the above measurement tools to help plan and forecast business performance, particularly Profit &amp; Loss and Cashflow and the key differences between them</li><li fr-original-style="" style="box-sizing: border-box;">Break even</li><li fr-original-style="" style="box-sizing: border-box;">Pricing methods</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who it is for</strong>:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The course is aimed at a whole range of businesses from start-up founders to local business owners to corporates, and is geared to anyone without a finance or accounting background. Your business must be based in or shortly relocating to North Essex (either Braintree, Chelmsford, Colchester, Maldon, or Tendring).</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who should attend</strong>:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Entrepreneurs</li><li fr-original-style="" style="box-sizing: border-box;">Micro business owners</li><li fr-original-style="" style="box-sizing: border-box;">Small business owners</li><li fr-original-style="" style="box-sizing: border-box;">Middle managers</li><li fr-original-style="" style="box-sizing: border-box;">Consultants</li><li fr-original-style="" style="box-sizing: border-box;">Coaches</li><li fr-original-style="" style="box-sizing: border-box;">E-commerce businesses</li><li fr-original-style="" style="box-sizing: border-box;">Digital marketers</li><li fr-original-style="" style="box-sizing: border-box;">Service based business owners</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Skills gained</strong>:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Understand basic financial documents used in business</li><li fr-original-style="" style="box-sizing: border-box;">Interpret the information in these documents, and use it to manage day-to-day business activity</li><li fr-original-style="" style="box-sizing: border-box;">Be more effective in their role</li></ul><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">About the host</strong>:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><u fr-original-style="" style="box-sizing: border-box;">Jim Fletcher ACMA GCMA</u></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Jim is a business manager with Let&#39;s Do Business Group and a dedicated business coach with 40 years&rsquo; commercial leadership experience. Drawing on his long career in the manufacturing and engineering sector, Jim provides tailored coaching, consultancy, non-executive directorship and project management services, across a full range of management, finance, sales &amp; marketing and operations functions.</p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">This programme is delivered by the North Essex Economic Board (NEEB) in partnership with Let&#39;s Do Business Group.</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Let&#39;s Do Business Group is undertaking this project jointly with the&nbsp;</strong></em><a href="https://neeb.org.uk/" target="_blank" rel="nofollow noopener noreferrer ugc" title="https://neeb.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><em fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">North Essex Economic Board (NEEB)</strong></em></a><em fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">. The Board is a partnership of local authorities in the area: Braintree, Maldon, and Tendring district councils, Colchester Borough Council, Chelmsford City Council and Essex County Council.</strong></em></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">This project is funded by the UK Government through the UK Shared Prosperity Fund.</strong></em></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">The UK Shared Prosperity Fund is a central pillar of the UK government&#39;s Levelling Up agenda and provides &pound;2.6 billion of funding for local investment by March 2025. The Fund aims to improve pride in place and increase life chances across the UK investing in communities and place, supporting local business, and people and skills. For more information, visit&nbsp;</strong></em><a href="https://www.gov.uk/government/publications/uk-shared-prosperity-fund-prospectus" target="_blank" rel="nofollow noopener noreferrer ugc" title="https://www.gov.uk/government/publications/uk-shared-prosperity-fund-prospectus" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><em fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">https://www.gov.uk/government/publications/uk-shared-prosperity-fund-prospectus</strong></em></a></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Please click here to see our&nbsp;</strong><a href="https://backingessexbusiness.co.uk/privacy-policy" target="_blank" rel="nofollow noopener noreferrer ugc" title="https://backingessexbusiness.co.uk/privacy-policy" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Privacy Policy</strong></a><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">. Please note that your details may be shared with the North Essex Economic Board who are funding this project.</strong></p>

In this course, you’ll gain a basic understanding of finance and accounting concepts to drive the success of your business.
This course aims to demystify the accounting language over three hours so that you are in control of the financial performance of your business, helping you forecast for the future, evaluate your current efforts, and establish strategies to meet your goals.
Date: Wednesday 25th September 2024
Time: 9:30am - 12:30pm
Location: Online
For: Businesses based in North Essex (Braintree, Chelmsford, Colchester, Maldon, and Tendring)
Cost: Free
More about the course
Even if you plan to hire an accountant, you still need to understand accounting information to make better, more informed decisions about your business. This webinar will give you the tools necessary to have a better understanding of what the professionals are saying down the line, so you can run your business better.
What it covers:
Part 1
Historical business finance measurement
The main performance measure - Profit & Loss
The main valuation measure - Balance Sheet
The importance of cash management and working capital
Part 2
How to apply this knowledge to business planning and targeting
Using the above measurement tools to help plan and forecast business performance, particularly Profit & Loss and Cashflow and the key differences between them
Break even
Pricing methods
Who it is for:
The course is aimed at a whole range of businesses from start-up founders to local business owners to corporates, and is geared to anyone without a finance or accounting background. Your business must be based in or shortly relocating to North Essex (either Braintree, Chelmsford, Colchester, Maldon, or Tendring).
Who should attend:
Entrepreneurs
Micro business owners
Small business owners
Middle managers
Consultants
Coaches
E-commerce businesses
Digital marketers
Service based business owners
Skills gained:
Understand basic financial documents used in business
Interpret the information in these documents, and use it to manage day-to-day business activity
Be more effective in their role
About the host:
Jim Fletcher ACMA GCMA
Jim is a business manager with Let's Do Business Group and a dedicated business coach with 40 years’ commercial leadership experience. Drawing on his long career in the manufacturing and engineering sector, Jim provides tailored coaching, consultancy, non-executive directorship and project management services, across a full range of management, finance, sales & marketing and operations functions.



This programme is delivered by the North Essex Economic Board (NEEB) in partnership with Let's Do Business Group.
Let's Do Business Group is undertaking this project jointly with the North Essex Economic Board (NEEB). The Board is a partnership of local authorities in the area: Braintree, Maldon, and Tendring district councils, Colchester Borough Council, Chelmsford City Council and Essex County Council.
This project is funded by the UK Government through the UK Shared Prosperity Fund.
The UK Shared Prosperity Fund is a central pillar of the UK government's Levelling Up agenda and provides £2.6 billion of funding for local investment by March 2025. The Fund aims to improve pride in place and increase life chances across the UK investing in communities and place, supporting local business, and people and skills. For more information, visit https://www.gov.uk/government/publications/uk-shared-prosperity-fund-prospectus
Please click here to see our Privacy Policy. Please note that your details may be shared with the North Essex Economic Board who are funding this project.

Let’s Do Business Group

This course aims to demystify the accounting language so that you are in control of the financial performance of your business, helping you forecast for the future, evaluate your current efforts, and establish strategies to meet your goals.

Finance for Non-Financial Entrepreneurs - North Essex

<div id="course-pills-1">Duration<p>4 Days</p><p>24 CPD hours</p>This course is intended for<p></p><p>The Microsoft Security Operations Analyst collaborates with organizational stakeholders to secure information technology systems for the organization. Their goal is to reduce organizational risk by rapidly remediating active attacks in the environment, advising on improvements to threat protection practices, and referring violations of organizational policies to appropriate stakeholders. Responsibilities include threat management, monitoring, and response by using a variety of security solutions across their environment. The role primarily investigates, responds to, and hunts for threats using Microsoft Sentinel, Microsoft Defender for Cloud, Microsoft 365 Defender, and third-party security products. Since the Security Operations Analyst consumes the operational output of these tools, they are also a critical stakeholder in the configuration and deployment of these technologies.</p><p></p><p></p><p>Learn how to investigate, respond to, and hunt for threats using Microsoft Sentinel, Microsoft Defender for Cloud, and Microsoft 365 Defender. In this course you will learn how to mitigate cyberthreats using these technologies. Specifically, you will configure and use Microsoft Sentinel as well as utilize Kusto Query Language (KQL) to perform detection, analysis, and reporting. The course was designed for people who work in a Security Operations job role and helps learners prepare for the exam SC-200: Microsoft Security Operations Analyst.</p><p></p>Prerequisites<p></p><li>Basic understanding of Microsoft 365</li>  <li>Fundamental understanding of Microsoft security, compliance, and identity products</li>   <li> Intermediate understanding of Windows 10</li>  <li> Familiarity with Azure services, specifically Azure SQL Database and Azure Storage</li>   <li> Familiarity with Azure virtual machines and virtual networking</li>   <li>Basic understanding of scripting concepts.</li><p></p></div><div id="course-pills-2"><h3>1 - Introduction to Microsoft 365 threat protection</h3> <ul> <li>Explore Extended Detection &amp; Response (XDR) response use cases</li> <li>Understand Microsoft Defender XDR in a Security Operations Center (SOC)</li> <li>Explore Microsoft Security Graph</li> <li>Investigate security incidents in Microsoft Defender XDR</li> </ul> <h3>2 - Mitigate incidents using Microsoft 365 Defender</h3> <ul> <li>Use the Microsoft Defender portal</li> <li>Manage incidents</li> <li>Investigate incidents</li> <li>Manage and investigate alerts</li> <li>Manage automated investigations</li> <li>Use the action center</li> <li>Explore advanced hunting</li> <li>Investigate Microsoft Entra sign-in logs</li> <li>Understand Microsoft Secure Score</li> <li>Analyze threat analytics</li> <li>Analyze reports</li> <li>Configure the Microsoft Defender portal</li> </ul> <h3>3 - Protect your identities with Microsoft Entra ID Protection</h3> <ul> <li>Microsoft Entra ID Protection overview</li> <li>Detect risks with Microsoft Entra ID Protection policies</li> <li>Investigate and remediate risks detected by Microsoft Entra ID Protection</li> </ul> <h3>4 - Remediate risks with Microsoft Defender for Office 365</h3> <ul> <li>Automate, investigate, and remediate</li> <li>Configure, protect, and detect</li> <li>Simulate attacks</li> </ul> <h3>5 - Safeguard your environment with Microsoft Defender for Identity</h3> <ul> <li>Configure Microsoft Defender for Identity sensors</li> <li>Review compromised accounts or data</li> <li>Integrate with other Microsoft tools</li> </ul> <h3>6 - Secure your cloud apps and services with Microsoft Defender for Cloud Apps</h3> <ul> <li>Understand the Defender for Cloud Apps Framework</li> <li>Explore your cloud apps with Cloud Discovery</li> <li>Protect your data and apps with Conditional Access App Control</li> <li>Walk through discovery and access control with Microsoft Defender for Cloud Apps</li> <li>Classify and protect sensitive information</li> <li>Detect Threats</li> </ul> <h3>7 - Respond to data loss prevention alerts using Microsoft 365</h3> <ul> <li>Describe data loss prevention alerts</li> <li>Investigate data loss prevention alerts in Microsoft Purview</li> <li>Investigate data loss prevention alerts in Microsoft Defender for Cloud Apps</li> </ul> <h3>8 - Manage insider risk in Microsoft Purview</h3> <ul> <li>Insider risk management overview</li> <li>Create and manage insider risk policies</li> <li>Investigate insider risk alerts</li> <li>Take action on insider risk alerts through cases</li> <li>Manage insider risk management forensic evidence</li> <li>Create insider risk management notice templates</li> </ul> <h3>9 - Investigate threats by using audit features in Microsoft Defender XDR and Microsoft Purview Standard</h3> <ul> <li>Explore Microsoft Purview Audit solutions</li> <li>Implement Microsoft Purview Audit (Standard)</li> <li>Start recording activity in the Unified Audit Log</li> <li>Search the Unified Audit Log (UAL)</li> <li>Export, configure, and view audit log records</li> <li>Use audit log searching to investigate common support issues</li> </ul> <h3>10 - Investigate threats using audit in Microsoft Defender XDR and Microsoft Purview (Premium)</h3> <ul> <li>Explore Microsoft Purview Audit (Premium)</li> <li>Implement Microsoft Purview Audit (Premium)</li> <li>Manage audit log retention policies</li> <li>Investigate compromised email accounts using Purview Audit (Premium)</li> </ul> <h3>11 - Investigate threats with Content search in Microsoft Purview</h3> <ul> <li>Explore Microsoft Purview eDiscovery solutions</li> <li>Create a content search</li> <li>View the search results and statistics</li> <li>Export the search results and search report</li> <li>Configure search permissions filtering</li> <li>Search for and delete email messages</li> </ul> <h3>12 - Protect against threats with Microsoft Defender for Endpoint</h3> <ul> <li>Practice security administration</li> <li>Hunt threats within your network</li> </ul> <h3>13 - Deploy the Microsoft Defender for Endpoint environment</h3> <ul> <li>Create your environment</li> <li>Understand operating systems compatibility and features</li> <li>Onboard devices</li> <li>Manage access</li> <li>Create and manage roles for role-based access control</li> <li>Configure device groups</li> <li>Configure environment advanced features</li> </ul> <h3>14 - Implement Windows security enhancements with Microsoft Defender for Endpoint</h3> <ul> <li>Understand attack surface reduction</li> <li>Enable attack surface reduction rules</li> </ul> <h3>15 - Perform device investigations in Microsoft Defender for Endpoint</h3> <ul> <li>Use the device inventory list</li> <li>Investigate the device</li> <li>Use behavioral blocking</li> <li>Detect devices with device discovery</li> </ul> <h3>16 - Perform actions on a device using Microsoft Defender for Endpoint</h3> <ul> <li>Explain device actions</li> <li>Run Microsoft Defender antivirus scan on devices</li> <li>Collect investigation package from devices</li> <li>Initiate live response session</li> </ul> <h3>17 - Perform evidence and entities investigations using Microsoft Defender for Endpoint</h3> <ul> <li>Investigate a file</li> <li>Investigate a user account</li> <li>Investigate an IP address</li> <li>Investigate a domain</li> </ul> <h3>18 - Configure and manage automation using Microsoft Defender for Endpoint</h3> <ul> <li>Configure advanced features</li> <li>Manage automation upload and folder settings</li> <li>Configure automated investigation and remediation capabilities</li> <li>Block at risk devices</li> </ul> <h3>19 - Configure for alerts and detections in Microsoft Defender for Endpoint</h3> <ul> <li>Configure advanced features</li> <li>Configure alert notifications</li> <li>Manage alert suppression</li> <li>Manage indicators</li> </ul> <h3>20 - Utilize Vulnerability Management in Microsoft Defender for Endpoint</h3> <ul> <li>Understand vulnerability management</li> <li>Explore vulnerabilities on your devices</li> <li>Manage remediation</li> </ul> <h3>21 - Plan for cloud workload protections using Microsoft Defender for Cloud</h3> <ul> <li>Explain Microsoft Defender for Cloud</li> <li>Describe Microsoft Defender for Cloud workload protections</li> <li>Enable Microsoft Defender for Cloud</li> </ul> <h3>22 - Connect Azure assets to Microsoft Defender for Cloud</h3> <ul> <li>Explore and manage your resources with asset inventory</li> <li>Configure auto provisioning</li> <li>Manual log analytics agent provisioning</li> </ul> <h3>23 - Connect non-Azure resources to Microsoft Defender for Cloud</h3> <ul> <li>Protect non-Azure resources</li> <li>Connect non-Azure machines</li> <li>Connect your AWS accounts</li> <li>Connect your GCP accounts</li> </ul> <h3>24 - Manage your cloud security posture management?</h3> <ul> <li>Explore Secure Score</li> <li>Explore Recommendations</li> <li>Measure and enforce regulatory compliance</li> <li>Understand Workbooks</li> </ul> <h3>25 - Explain cloud workload protections in Microsoft Defender for Cloud</h3> <ul> <li>Understand Microsoft Defender for servers</li> <li>Understand Microsoft Defender for App Service</li> <li>Understand Microsoft Defender for Storage</li> <li>Understand Microsoft Defender for SQL</li> <li>Understand Microsoft Defender for open-source databases</li> <li>Understand Microsoft Defender for Key Vault</li> <li>Understand Microsoft Defender for Resource Manager</li> <li>Understand Microsoft Defender for DNS</li> <li>Understand Microsoft Defender for Containers</li> <li>Understand Microsoft Defender additional protections</li> </ul> <h3>26 - Remediate security alerts using Microsoft Defender for Cloud</h3> <ul> <li>Understand security alerts</li> <li>Remediate alerts and automate responses</li> <li>Suppress alerts from Defender for Cloud</li> <li>Generate threat intelligence reports</li> <li>Respond to alerts from Azure resources</li> </ul> <h3>27 - Construct KQL statements for Microsoft Sentinel</h3> <ul> <li>Understand the Kusto Query Language statement structure</li> <li>Use the search operator</li> <li>Use the where operator</li> <li>Use the let statement</li> <li>Use the extend operator</li> <li>Use the order by operator</li> <li>Use the project operators</li> </ul> <h3>28 - Analyze query results using KQL</h3> <ul> <li>Use the summarize operator</li> <li>Use the summarize operator to filter results</li> <li>Use the summarize operator to prepare data</li> <li>Use the render operator to create visualizations</li> </ul> <h3>29 - Build multi-table statements using KQL</h3> <ul> <li>Use the union operator</li> <li>Use the join operator</li> </ul> <h3>30 - Work with data in Microsoft Sentinel using Kusto Query Language</h3> <ul> <li>Extract data from unstructured string fields</li> <li>Extract data from structured string data</li> <li>Integrate external data</li> <li>Create parsers with functions</li> </ul> <h3>31 - Introduction to Microsoft Sentinel</h3> <ul> <li>What is Microsoft Sentinel?</li> <li>How Microsoft Sentinel works</li> <li>When to use Microsoft Sentinel</li> </ul> <h3>32 - Create and manage Microsoft Sentinel workspaces</h3> <ul> <li>Plan for the Microsoft Sentinel workspace</li> <li>Create a Microsoft Sentinel workspace</li> <li>Manage workspaces across tenants using Azure Lighthouse</li> <li>Understand Microsoft Sentinel permissions and roles</li> <li>Manage Microsoft Sentinel settings</li> <li>Configure logs</li> </ul> <h3>33 - Query logs in Microsoft Sentinel</h3> <ul> <li>Query logs in the logs page</li> <li>Understand Microsoft Sentinel tables</li> <li>Understand common tables</li> <li>Understand Microsoft Defender XDR tables</li> </ul> <h3>34 - Use watchlists in Microsoft Sentinel</h3> <ul> <li>Plan for watchlists</li> <li>Create a watchlist</li> <li>Manage watchlists</li> </ul> <h3>35 - Utilize threat intelligence in Microsoft Sentinel</h3> <ul> <li>Define threat intelligence</li> <li>Manage your threat indicators</li> <li>View your threat indicators with KQL</li> </ul> <h3>36 - Connect data to Microsoft Sentinel using data connectors</h3> <ul> <li>Ingest log data with data connectors</li> <li>Understand data connector providers</li> <li>View connected hosts</li> </ul> <h3>37 - Connect Microsoft services to Microsoft Sentinel</h3> <ul> <li>Plan for Microsoft services connectors</li> <li>Connect the Microsoft Office 365 connector</li> <li>Connect the Microsoft Entra connector</li> <li>Connect the Microsoft Entra ID Protection connector</li> <li>Connect the Azure Activity connector</li> </ul> <h3>38 - Connect Microsoft Defender XDR to Microsoft Sentinel</h3> <ul> <li>Plan for Microsoft Defender XDR connectors</li> <li>Connect the Microsoft Defender XDR connector</li> <li>Connect Microsoft Defender for Cloud connector</li> <li>Connect Microsoft Defender for IoT</li> <li>Connect Microsoft Defender legacy connectors</li> </ul> <h3>39 - Connect Windows hosts to Microsoft Sentinel</h3> <ul> <li>Plan for Windows hosts security events connector</li> <li>Connect using the Windows Security Events via AMA Connector</li> <li>Connect using the Security Events via Legacy Agent Connector</li> <li>Collect Sysmon event logs</li> </ul> <h3>40 - Connect Common Event Format logs to Microsoft Sentinel</h3> <ul> <li>Plan for Common Event Format connector</li> <li>Connect your external solution using the Common Event Format connector</li> </ul> <h3>41 - Connect syslog data sources to Microsoft Sentinel</h3> <ul> <li>Plan for syslog data collection</li> <li>Collect data from Linux-based sources using syslog</li> <li>Configure the Data Collection Rule for Syslog Data Sources</li> <li>Parse syslog data with KQL</li> </ul> <h3>42 - Connect threat indicators to Microsoft Sentinel</h3> <ul> <li>Plan for threat intelligence connectors</li> <li>Connect the threat intelligence TAXII connector</li> <li>Connect the threat intelligence platforms connector</li> <li>View your threat indicators with KQL</li> </ul> <h3>43 - Threat detection with Microsoft Sentinel analytics</h3> <ul> <li>What is Microsoft Sentinel Analytics?</li> <li>Types of analytics rules</li> <li>Create an analytics rule from templates</li> <li>Create an analytics rule from wizard</li> <li>Manage analytics rules</li> </ul> <h3>44 - Automation in Microsoft Sentinel</h3> <ul> <li>Understand automation options</li> <li>Create automation rules</li> </ul> <h3>45 - Threat response with Microsoft Sentinel playbooks</h3> <ul> <li>What are Microsoft Sentinel playbooks?</li> <li>Trigger a playbook in real-time</li> <li>Run playbooks on demand</li> </ul> <h3>46 - Security incident management in Microsoft Sentinel</h3> <ul> <li>Understand incidents</li> <li>Incident evidence and entities</li> <li>Incident management</li> </ul> <h3>47 - Identify threats with Behavioral Analytics</h3> <ul> <li>Understand behavioral analytics</li> <li>Explore entities</li> <li>Display entity behavior information</li> <li>Use Anomaly detection analytical rule templates</li> </ul> <h3>48 - Data normalization in Microsoft Sentinel</h3> <ul> <li>Understand data normalization</li> <li>Use ASIM Parsers</li> <li>Understand parameterized KQL functions</li> <li>Create an ASIM Parser</li> <li>Configure Azure Monitor Data Collection Rules</li> </ul> <h3>49 - Query, visualize, and monitor data in Microsoft Sentinel</h3> <ul> <li>Monitor and visualize data</li> <li>Query data using Kusto Query Language</li> <li>Use default Microsoft Sentinel Workbooks</li> <li>Create a new Microsoft Sentinel Workbook</li> </ul> <h3>50 - Manage content in Microsoft Sentinel</h3> <ul> <li>Use solutions from the content hub</li> <li>Use repositories for deployment</li> </ul> <h3>51 - Explain threat hunting concepts in Microsoft Sentinel</h3> <ul> <li>Understand cybersecurity threat hunts</li> <li>Develop a hypothesis</li> <li>Explore MITRE ATT&amp;CK</li> </ul> <h3>52 - Threat hunting with Microsoft Sentinel</h3> <ul> <li>Explore creation and management of threat-hunting queries</li> <li>Save key findings with bookmarks</li> <li>Observe threats over time with livestream</li> </ul> <h3>53 - Use Search jobs in Microsoft Sentinel</h3> <ul> <li>Hunt with a Search Job</li> <li>Restore historical data</li> </ul> <h3>54 - Hunt for threats using notebooks in Microsoft Sentinel</h3> <ul> <li>Access Azure Sentinel data with external tools</li> <li>Hunt with notebooks</li> <li>Create a notebook</li> <li>Explore notebook code</li> </ul></div>

Microsoft AZ-900

Microsoft AZ-104

Microsoft SC-200

Microsoft AZ-303

Microsoft AZ-700

SC-200T00 Microsoft Security Operations Analyst

<h3 id="isPasted" style="color: rgb(0, 31, 46); box-sizing: border-box;" fr-original-style=" color: rgb(0, 31, 46);">Innovation can only become a sustainable process when it is embedded in the organisational culture. But changing an organisational culture isn&rsquo;t easy. Implementing the changes that will drive cultural change requires equipping your people with the necessary skills and competencies that will allow them to become change agents, promoting and supporting new ways of working. &nbsp;</h3><p style="color: rgb(0, 31, 46); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 31, 46);">Our FREE webinar on <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Wednes</strong><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">day 17 May</strong>&nbsp;will help you learn how to drive innovation in your organisation and foster a creative, adaptive and sustainable work environment.</p><p style="color: rgb(0, 31, 46); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 31, 46);">At this engaging webinar attendees will learn:</p><ul style="color: rgb(0, 31, 46); box-sizing: border-box;" fr-original-style=" color: rgb(0, 31, 46);"><li fr-original-style="" style="box-sizing: border-box;">Why organisations struggle to make innovation sustainable</li><li fr-original-style="" style="box-sizing: border-box;">What it takes to embed innovation in the organisational DNA</li><li fr-original-style="" style="box-sizing: border-box;">The essential skills required to achieve sustainable innovation</li><li fr-original-style="" style="box-sizing: border-box;">How to implement a skills framework to underpin sustainable innovation</li></ul><h3 style="color: rgb(0, 31, 46); box-sizing: border-box;" fr-original-style=" color: rgb(0, 31, 46);">Our Speaker</h3><p style="color: rgb(0, 31, 46); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 31, 46);">David Mawhinney OBE is the co-founder of Celsio, a specialist innovation consultancy that provides business leaders with the tools, skills, and confidence to think differently about their business. An experienced CEO, he has worked with both start-ups and established companies, using innovation as lever to drive business growth.</p><p style="color: rgb(0, 31, 46); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 31, 46);"><em fr-original-style="" style="box-sizing: border-box;">If you require more information or need help to register yourself or a group of colleagues, please email <a href="mailto:mervyn.mccormick@cforc.org" style="color: rgb(225, 14, 73); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" target="_blank" fr-original-style=" color: rgb(225, 14, 73);">mervyn.mccormick@cforc.org</a></em></p>

A Digital Ecosystem for The Energy Sector“Accelerate the new era in Energy by unlocking the Digital Future”Thursday 26TH September 1:30 pm – 2:45pm
The world’s energy systems are changing. The smart grid is an electricity network that uses digital innovation and other advanced technologies including AI to monitor and manage the transport of electricity from decentralized generation sources to meet the varying electricity demands of end users. Hear from 2 leading experts from a major utility (ESB) and a global multinational (GE) on how they are providing leading edge digital solutions and have a clear view of the innovation required to accelerate the pace of change.

Host: Paddy Turnbull, Vice Chair, Smart Grid Ireland

Presenters:
Edmund O’Carroll, ESB Networks’ newly formed Business and Operations Hub within the DMSO.
Ed holds a B.Eng (Elec) from UCC and M.Eng.SC from the Tyndall Institute, Cork. Ed joined ESB Networks in 2003 and worked in a number of roles, principally in the original roll out of the Outage Management System (OMS). Ed moved to Eirgrid in 2009 to work with the Power Systems Applications team where he was SCADA Team Lead and worked on integration of many new technologies into the transmission control room. Ed rejoined ESB Networks in 2022 to work in NN,LC as the Operational Control Architecture manager. Ed is currently working in the newly formed Business and Operations Hub within the DMSO.

Thorsten Heller – Chief Innovation Officer, General Electric Vernova Electrification Software 
Thorsten was the CEO & Co-Founder of Greenbird Integration Technology providing the leading Enterprise iPaaS and Data Mesh Platform driving the Energy Transition. Acquired by GE Vernova in August 2023. Software Utility Executive with long term experience in datafy’ing utilities to build a more sustainable grid.



Centre for Competitiveness

Innovation

Learn how to drive innovation in your organisation and foster a creative, adaptive and sustainable work environment.

SGI Webinar - THOUGHT LEADERSHIP WEBINAR

<div id="course-pills-1">Duration<p>3 Days</p><p>18 CPD hours</p>This course is intended for<p>The primary audience for this course is someone who works, or has ambition to work, in a leadership role in data center operations such as a data center facilities manager, data center operations manager, who has the responsibility to achieve and improve the high-availability and manageability of the data center operations.</p>Overview<p>After completion of the course the participant will be able to:<br />Perform the needs analysis translating business requirements to data center services<br />Set-up and manage the data center operations team<br />Implement and monitor safety- and security practices<br />Identify a suitable maintenance program for the data center facility and its equipment<br />Select the appropriate policies and procedures required for data center operations<br />Monitor the data center availability, capacity and capability<br />Manage and implement basic data center projects<br />Set-up and implement an environmental sustainability program<br />Select an appropriate back-up site to support organizational resilience<br />Identify and respond to risk in the data center<br />Manage and support the document life cycle<br />Create a basic budget proposal<br />Select and manage vendors and measure their performance<br />Manage data center assets</p><p>Managing the facilities of today?s high-end and high-availability data centers is an extremely demanding and complex task which is often underestimated. There is often very little appreciation and understanding of the complexities of managing today's mission-critical data centers where downtime is not an option, especially since many of the data centers are operating at, or near, their design limits. Operations management at the facilities layer makes all the difference. Even a data center designed to the highest redundancy level as per the ANSI/TIA-942 standard could still experience many unscheduled downtime events due to poor planning, operations, maintenance and management processes.</p></div><div id="course-pills-2"><h4>Service Level Management</h4><ul><li>Service Level Management</li><li>Needs analysis</li><li>Capability assessment</li><li>Service portfolio</li><li>Service catalogue</li><li>Service Level Agreements (SLAs)</li><li>Availability measurement</li><li>Data points in SLA</li><li>Service reporting</li><li>Complaint procedure</li><li>Customer satisfaction measurement</li><li>Service Improvement Process (SIP)</li><li>SLA content</li></ul><h4>The Data Center Organization</h4><ul><li>Operational issues</li><li>Organization chart</li><li>Roles and responsibilities</li><li>Skills matrix</li><li>Contingency / backup roles</li><li>Shift management</li><li>Performance management</li><li>Career development</li><li>Training and assessment</li><li>Job rotation</li><li>Succession planning</li><li>Disciplinary program</li></ul><h4>Managing Safety &amp; Statutory Requirements</h4><ul><li>Safety policies and regulations</li><li>Occupational Health and Safety (OH&amp;S)</li><li>Safety awareness training</li><li>Permit to Work (PTW)</li><li>Lock-out / Tag-out</li><li>Personal Protective Equipment (PPE)</li><li>Testing and tagging of equipment</li><li>Emergency preparedness and response</li><li>Reporting of safety issues</li><li>Reviews / internal audit / external audit</li></ul><h4>Managing Physical Security</h4><ul><li>Security policies and procedures</li><li>Security standards and guidelines</li><li>Security staff</li><li>Security awareness</li><li>Security incident management</li><li>Disciplinary program</li><li>Reviews, internal and external audits</li></ul><h4>Facilities Management</h4><ul><li>Maintenance policies and procedures</li><li>Various maintenance programs</li><li>Outsourcing of maintenance activities</li><li>Maintenance contract options</li><li>Warranty</li><li>Maintenance schedule</li><li>Service situations</li><li>Spart part management</li><li>Contamination control</li></ul><h4>Data Center Operations</h4><ul><li>Policies and procedures for data center operations</li><li>Service operations and the daily data center operations</li></ul><h4>Monitoring / Reporting / Control</h4><ul><li>Monitoring requirements</li><li>Escalation procedures</li><li>Reporting</li><li>Trend analysis</li><li>Reviews</li></ul><h4>Project Management</h4><ul><li>Project management</li><li>Project organization</li><li>Project manager</li><li>Project phases</li></ul><h4>Environment Sustainability</h4><ul><li>The importance of sustainability</li><li>Sustainability policies </li><li>Environmental management </li><li>Power efficiency indicators -</li><li>Waste management -</li><li>Water management</li><li>ICT utilisation management </li><li>Environmental performance measurements</li><li>Renewable energy factor (REF)</li></ul><h4>Organizational Resilience</h4><ul><li>Business continuity</li><li>Data center facility options</li><li>Business Impact Analysis</li><li>Type of facility</li><li>Human resources</li><li>Facility, equipment and consumables</li></ul><h4>Governance, Risk and Compliance</h4><ul><li>Management commitment</li><li>Coordination, collaboration and integration</li><li>Compliance</li><li>Risk management</li><li>Document management</li><li>Financial management</li><li>Vendor management</li><li>Asset management</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Data Center Facilities Operations Manager (CDFOM) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Data Center Facilities Operations Manager (CDFOM) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Operations Management

Certified Facility Manager (CFM)

Facility Management

Operations Manager

Certified Data Center Facilities Operations Manager (CDFOM)

<div id="menu0">
									<div>
			<div>
				<div>
							<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
					<div><p><span>Join our Level 3 Operations Management Diploma course and discover your hidden skills, setting you on a path to success in this area. Get ready to improve your skills and achieve your biggest goals. The Level 3 Operations Management Diploma course has everything you need to get a great start in this sector.</span></p><p><span>Improving and moving forward is key to getting ahead personally. The Level 3 Operations Management Diploma course is designed to teach you the important stuff quickly and well, helping you to get off to a great start in the field. So, what are you looking for? Enrol now!</span></p></div>
				</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>
				<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
					<div>
							
					<div></div>
										<div></div>
														
							
					<div></div>
										<div></div>
														
							
					<div></div>
										<div></div>
														
							
					<div></div>
										<div></div>
														
					</div>
			</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>
				<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
			<h4>You will Learn The Following Things: </h4>  		</div>
				</div>
				<div>
				<div>
					<ul>
							<li>
											<span>
							<i></i>						</span>
										<span>Learn strategies to boost your workplace efficiency.</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>Hone your skills to help you advance your career.</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>Acquire a comprehensive understanding of various topics and tips.</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>Learn in-demand skills that are in high demand among UK employers</span>
									</li>
						</ul>
				</div>
				</div>
				<div>
				<div>
					<div><p><span>This course covers the topic you must know to stand against the tough competition. The future is truly yours to seize with this Level 3 Operations Management Diploma. Enrol today and complete the course to achieve a certificate that can change your career forever.</span></p></div>
				</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>
				<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
			<h2>Details
</h2>		</div>
				</div>
				<div>
				<div>
			<h4>Perks of Learning with IOMH</h4>  		</div>
				</div>
				<div>
				<div>
					<ul>
							<li>
											<span>
							<i></i>						</span>
										<span>One-to-one support from a dedicated tutor throughout your course.</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>Study online - whenever and wherever you want.</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>Instant Digital/ PDF certificate</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>100% money back guarantee</span>
									</li>
								<li>
											<span>
							<i></i>						</span>
										<span>12 months access</span>
									</li>
						</ul>
				</div>
				</div>
				<div>
				<div>
			<h4>Process of Evaluation</h4>  		</div>
				</div>
				<div>
				<div>
					<div><p>After studying the course, an MCQ exam or assignment will test your skills and knowledge. You have to get a score of 60% to pass the test and get your certificate.</p></div>
				</div>
				</div>
				<div>
				<div>
			<h4>Certificate of Achievement</h4>  		</div>
				</div>
				<div>
				<div>
					<div><p><span>Certificate of Completion - Digital/PDF Certificate</span></p><p>After completing the <span>Level 3 Operations Management Diploma course</span>, you can order your<span> CPD-accredited Digital/PDF Certificate for £5.99. </span></p><p><span>Certificate of Completion - Hard copy Certificate</span></p><p><span><span>You can get the CPD Accredited Hard Copy Certificate for £12.99. (Each)</span></span></p><div><span> </span></div><div><span>Shipping Charges:</span><span><span><br /></span></span></div><ul><li><p><span>Inside the UK: £3.99</span></p></li><li><p><span>International: £10.99</span></p></li></ul></div>
				</div>
				</div>
				<div>
				<div>
			<h4>Who Is This Course for?</h4>  		</div>
				</div>
				<div>
				<div>
					<div><p><span>This Level 3 Operations Management Diploma is suitable for anyone aspiring to start a career in relevant field; even if you are new to this and have no prior knowledge, this course is going to be very easy for you to understand. </span></p><p><span>On the other hand, if you are already working in this sector, this course will be a great source of knowledge for you to improve your existing skills and take them to the next level. </span></p><p><span>This course has been developed with maximum flexibility and accessibility, making it ideal for people who don't have the time to devote to traditional education.</span></p></div>
				</div>
				</div>
				<div>
				<div>
			<h4>Requirements</h4>  		</div>
				</div>
				<div>
				<div>
					<div><p><span>There is no prerequisite to enrol in this course. You don't need any educational qualification or experience to enrol in the Level 3 Operations Management Diploma course.</span></p><p><span>Do note: you must be at least 16 years old to enrol.</span></p><p><span>Any internet-connected device, such as a computer, tablet, or smartphone, can access this online course.</span></p></div>
				</div>
				</div>
				<div>
				<div>
			<h4>Career Path</h4>  		</div>
				</div>
				<div>
				<div>
					<div><p><span>The certification and skills you get from this </span><span>Level 3 Operations Management Diploma Course</span><span> can help you advance your career and gain expertise in several fields, allowing you to apply for high-paying jobs in related sectors.</span></p></div>
				</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>
						</div>
			</div>
		</div>
								</div>
						<div id="menu1">
							<div>
											<div>
				<h3>
	<span>Course Curriculum</span>
</h3>

<div>
<table>				<tbody><tr>
					<td colspan="4"> Module 01: Introduction to Operations Management </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Introduction to Operations Management</td>
					<td> </td>
					<td><span><i></i> 00:23:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 02: Project Management </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Project Management</td>
					<td> </td>
					<td><span><i></i> 00:22:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 03: Business Development and Succession Planning </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Business Development and Succession Planning</td>
					<td> </td>
					<td><span><i></i> 00:27:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 04: Process Management </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Process Management</td>
					<td> </td>
					<td><span><i></i> 00:26:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 05: Supply Chain Management </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Supply Chain Management</td>
					<td> </td>
					<td><span><i></i> 00:23:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 06: Planning &amp; Forecasting Operations </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Planning &amp; Forecasting Operations</td>
					<td> </td>
					<td><span><i></i> 00:23:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 07: Procurement &amp; Purchasing Management </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Procurement &amp; Purchasing Management</td>
					<td> </td>
					<td><span><i></i> 00:23:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 08: Manufacturing &amp; Delivery Operations </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Manufacturing &amp; Delivery Operations</td>
					<td> </td>
					<td><span><i></i> 00:19:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 09: Quality Management </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Quality Management</td>
					<td> </td>
					<td><span><i></i> 00:23:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 10: Managing Risk and Recovery </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Managing Risk and Recovery</td>
					<td> </td>
					<td><span><i></i> 00:29:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 11: Performance Management </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Performance Management</td>
					<td> </td>
					<td><span><i></i> 00:21:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 12: Talent Management </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Talent Management</td>
					<td> </td>
					<td><span><i></i> 00:20:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 13: Communication Skills </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Communication Skills</td>
					<td> </td>
					<td><span><i></i> 00:26:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 14: Negotiation Techniques </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Negotiation Techniques</td>
					<td> </td>
					<td><span><i></i> 00:19:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 15: Conflict Management </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Conflict Management</td>
					<td> </td>
					<td><span><i></i> 00:17:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 16: Stress Management </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Stress Management</td>
					<td> </td>
					<td><span><i></i> 00:19:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 17: Time Management </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Time Management</td>
					<td> </td>
					<td><span><i></i> 00:40:00</span></td>
				</tr>
								<tr>
					<td colspan="4">Module 18: Business Environment	</td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Business Environment</td>
					<td> </td>
					<td><span><i></i> 00:19:00</span></td>
				</tr>
								<tr>
					<td colspan="4"> Module 19: Business Writing Skills </td>
				</tr>
								<tr>
					<td><i></i></td>
					<td>Business Writing Skills</td>
					<td> </td>
					<td><span><i></i> 00:39:00</span></td>
				</tr>
				</tbody></table></div>

			</div>
									</div>
						</div>
						<div id="menu2">
							
						</div>

Join our Level 3 Operations Management Diploma course and discover your hidden skills, setting you on a path to success in this area. Get ready to improve your skills and achieve your biggest goals. The Level 3 Operations Management Diploma course has everything you need to get a great start in this sector.
Improving and moving forward is key to getting ahead personally. The Level 3 Operations Management Diploma course is designed to teach you the important stuff quickly and well, helping you to get off to a great start in the field. So, what are you looking for? Enrol now!
You will Learn The Following Things:
Learn strategies to boost your workplace efficiency.
Hone your skills to help you advance your career.
Acquire a comprehensive understanding of various topics and tips.
Learn in-demand skills that are in high demand among UK employers
This course covers the topic you must know to stand against the tough competition. The future is truly yours to seize with this Level 3 Operations Management Diploma. Enrol today and complete the course to achieve a certificate that can change your career forever.
Details

Perks of Learning with IOMH
One-to-one support from a dedicated tutor throughout your course.
Study online - whenever and wherever you want.
Instant Digital/ PDF certificate
100% money back guarantee
12 months access
Process of Evaluation
After studying the course, an MCQ exam or assignment will test your skills and knowledge. You have to get a score of 60% to pass the test and get your certificate.
Certificate of Achievement
Certificate of Completion - Digital/PDF Certificate
After completing the Level 3 Operations Management Diploma course, you can order your CPD-accredited Digital/PDF Certificate for £5.99. 
Certificate of Completion - Hard copy Certificate
You can get the CPD Accredited Hard Copy Certificate for £12.99. (Each)
Shipping Charges:
Inside the UK: £3.99
International: £10.99
Who Is This Course for?
This Level 3 Operations Management Diploma is suitable for anyone aspiring to start a career in relevant field; even if you are new to this and have no prior knowledge, this course is going to be very easy for you to understand. 
On the other hand, if you are already working in this sector, this course will be a great source of knowledge for you to improve your existing skills and take them to the next level. 
This course has been developed with maximum flexibility and accessibility, making it ideal for people who don't have the time to devote to traditional education.
Requirements
There is no prerequisite to enrol in this course. You don't need any educational qualification or experience to enrol in the Level 3 Operations Management Diploma course.
Do note: you must be at least 16 years old to enrol.
Any internet-connected device, such as a computer, tablet, or smartphone, can access this online course.
Career Path
The certification and skills you get from this Level 3 Operations Management Diploma Course can help you advance your career and gain expertise in several fields, allowing you to apply for high-paying jobs in related sectors.
 Course Curriculum

Module 01: Introduction to Operations Management			
	Introduction to Operations Management		00:23:00
Module 02: Project Management			
	Project Management		00:22:00
Module 03: Business Development and Succession Planning			
	Business Development and Succession Planning		00:27:00
Module 04: Process Management			
	Process Management		00:26:00
Module 05: Supply Chain Management			
	Supply Chain Management		00:23:00
Module 06: Planning & Forecasting Operations			
	Planning & Forecasting Operations		00:23:00
Module 07: Procurement & Purchasing Management			
	Procurement & Purchasing Management		00:23:00
Module 08: Manufacturing & Delivery Operations			
	Manufacturing & Delivery Operations		00:19:00
Module 09: Quality Management			
	Quality Management		00:23:00
Module 10: Managing Risk and Recovery			
	Managing Risk and Recovery		00:29:00
Module 11: Performance Management			
	Performance Management		00:21:00
Module 12: Talent Management			
	Talent Management		00:20:00
Module 13: Communication Skills			
	Communication Skills		00:26:00
Module 14: Negotiation Techniques			
	Negotiation Techniques		00:19:00
Module 15: Conflict Management			
	Conflict Management		00:17:00
Module 16: Stress Management			
	Stress Management		00:19:00
Module 17: Time Management			
	Time Management		00:40:00
Module 18: Business Environment			
	Business Environment		00:19:00
Module 19: Business Writing Skills			
	Business Writing Skills		00:39:00

210 Courses in Leeds

The Impact of Electric Vehicles (EVs) on the Grid

By EnergyEdge - Training for a Sustainable Energy Future

Tripod Beta Practitioner - Bronze Level

By EnergyEdge - Training for a Sustainable Energy Future

Data Analytics Workflows for Artificial Lift, Production and Facility Engineers

By EnergyEdge - Training for a Sustainable Energy Future

IFRS Accounting for the Oil and Gas Sector

By EnergyEdge - Training for a Sustainable Energy Future

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

By EnergyEdge - Training for a Sustainable Energy Future

Level 3 Diploma in Supervising Licensed Asbestos Removal

By Dynamic Training and Assessments Ltd

NPORS Manual Handling (N704)

By Dynamic Training and Assessments Ltd

HPHT Planning and Well Control

By EnergyEdge - Training for a Sustainable Energy Future

Drill String Design & Drilling Optimization

By EnergyEdge - Training for a Sustainable Energy Future

Layer of Protection Analysis (LOPA)

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location