Name: Networks demystified
Price: 657 GBP
Availability: InStock

Redhill

<h3><b>Transmission demystified training course description</b></h3> 
				<p>Transmission is the process of sending information along a medium of, copper, fibre or wireless. This course looks at transmission techniques for both telecommunications and data communications with a particular focus on Microwave, SDH, DWDM transmission. The course aims to demystify these technologies by explaining all the buzzwords used in transmission.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
          <li>Describe various transmission technologies such as multiplexing and demultiplexing.</li>
					<li>Explain how Microwave works.</li>
                    <li>Explain how SDH works.</li>
                    <li>Explain how DWDM works.</li>
                   
                  </ul>
       
        <h5>
        <b>Transmission demystified training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Anyone working in telecommunications.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>None.</p>
              
							<li><b>Duration</b></li>
							
              <p>2 days
						</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Transmission demystified training course contents</b></h3>
      <ul>
				<li>Transmission basics</li><p>
Systems, media, signals. Signal degradation, noise, distortion, attenuation. Digital, analogue. Modulation, encoding.

</p><li>RF</li><p>
Frequency, wavelength. Distance / range issues, interference, Antenna, power, dB, RF propagation, testing.

</p><li>Microwave transmission</li><p>
What is microwave transmission, point to point communications, line of sight, parabolic antenna, relays, planning considerations, rain and other issues

</p><li>Wired transmissions</li><p>
Copper, Fibre, optical transmission, fibre characteristics, fibre component parts. Multi Mode Fibre (MMF). Single Mode Fibre (SMF). Fibre connections. Lasers. Attenuations, dispersion, optical signal noise ratios (OSNR) and their effects. Channel Spacing and Signal Direction. Limiting factors to single wavelength.

</p><li>Introduction to SDH</li><p>
Timing and synchronisation of digital signals, the plesiochronous digital hierarchy (PDH), the synchronous digital hierarchy (SDH), service protection with SDH. TDM.

</p><li>SDH6</li><p>
Standards, basic units, frames, STM1 frame, bit rates, STM0, STM1, STM4, STM16, STM64, STM256, SDH architecture, rings, Add drop multiplexors. SDH network topologies, structure of SDH equipment, SDH synchronisation, protection switching in SDH networks, SDH alarm structure, testing of SDH, equipment and systems, Ethernet over SDH.

</p><li>WDM overview</li><p>
Multiplexing, TDM, WDM benefits. WDM standards. CWDM vs. DWDM. Four Wave Mixing (FWM). Impact and countermeasures to FWM on WDM.tructure of SDH equipment, SDH synchronisation, protection switching in SDH networks, SDH alarm structure, testing of SDH, equipment and systems, Ethernet over SDH.

</p><li>DWDM</li><p>
ITU G.694.1, channel and spacing. Optical Terminal Multiplexers (OTM). Optical Add/Drop Multiplexers (OADM). Adding versus dropping. Optical Amplifiers. Erbium Doped Fibre Amplifiers (EDFA). Transponders and Combiners. Optical and Electrical Cross Connects (OXCs/DXCs). Cross Connect types (Transparent/Opaque). Advantages and disadvantages of various Optical cross connects.

	</p><li>IP transmission</li><p>
Telecommunications versus data communications, IP transmission, VoIP, MPLS.
</p>
      </ul>

Systems & Network Training

Network & Security

Network Engineer

Transmission demystified

General Admission

<h3><b>LINX II training course description</b></h3>
        <p>An intensive hands on IP routing course leading to
LINX Accredited Internet Technician stage 2 focusing
on routing in an IP environment. The course
concentrates on OSPF and IS-IS but also covers BGP
and MPLS. Hands on sessions are used to reinforce
the theory rather than teach specific manufacturer
equipment.
<br /><b>A multiple choice exam, leading to the LAIT II
certification, is available after the course. The exam
consists of 60 questions and lasts 2.0 hours.
</b> </p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
       <li>Calculate subnet numbers in seconds.</li>
					<li>Configure and troubleshoot static routes</li>
                    <li>Explain how OSPF works.</li>
                    <li>Build resilient networks with VRRP and OSPF.</li>
                    <li>Implement and troubleshoot OSPF, IS-IS, simple
BGP and simple MPLS.</li>
                    <li>Evaluate and choose appropriate routing protocols for particular scenarios.</li>
                  </ul>
        <h5>
        <b>LINX II training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Network engineers.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>LAIT I attendance and 55%+ exam score OR 
 LAIT I exam only and pass (70%+) OR CCNA and take LAIT I exam on this course.</p>
              
							<li><b>Duration</b></li>
							
              <p>5 days</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>LINX II training course contents</b></h3>
       <ul>
        <li>Basic routing</li>
        <p> Review of LAIT I routing, reading routing tables. <br />
          
          <span>Hands on</span> Setting up a routed network. </p>
        <li>Static routes</li>
        <p> Why use static routes? Default routes. <br />
         
          <span>Hands on</span> Configuring static routes. </p>
        <li>First hop redundancy</li>
        <p> Default gateways, VRRP/HSRP/GLBP. Load
          sharing, critical IP addresses. <br />
          <span>Hands on</span> VRRP. </p>
        <li>Basic OSPF</li>
        <p> What is OSPF? Process IDs, passive interfaces. <br />
          <span>Hands on</span> Simple OSPF. </p>
        <li>Subnetting</li>
        <p> Bit boundary subnetting, calculating network
          numbers. <br />
         
          <span>Exercise:</span> Subnetting. </p>
        <li>OSPF overview</li>
        <p> Metrics, convergence, DV vs. Link state, IGPs,
          classless, OSPF features, load sharing, OSPF
          authentication. <br />
          <span>Hands on</span> OSPF features. </p>
        <li>OSPF within an area</li>
        <p> How OSPF works, LSAs, LSDB, router IDs, hellos,
          configuring hellos, exchange protocol. <br />
          <span>Hands on</span> Investigating OSPF structures.
			
         </p>
        <li> OSPF areas</li>
        <p>
          Scalability, why areas? Area IDs, area 0, ABRs,
          ABR resilience, areas &amp; LSDBs &amp; LSAs, virtual
          links. <br />
          <span>Hands on</span> Multi area OSPF. </p>
        <li>Redistribution</li>
        <p> Multiple routing protocols, common scenarios,
          routing distance, External LSAs, E1 and E2. Type
          4 LSAs. OSPF and default routes. <br />
          <span>Hands on</span> Configuring static route redistribution. </p>
        <li>Route aggregation</li>
        <p> Route summarisation. How to aggregate, CIDR,
          ASBR summarisation. <br />
          <span>Hands on</span> OSPF address
          summarisation. </p>
        <li>OSPF packet formats</li>
        <p> OSPF packets, protocol stack, packet flows,
          OSPF headers, neighbours, neighbour states,
          DRs, adjacencies, BDRs, DR election. <br />
          <span>Hands on</span> Analysing OSPF packets, troubleshooting. OSPF </p>
        <li>OSPF stub areas</li>
        <p> LSA types, area types, area architecture, stub
          areas, default routes, benefits &amp; disadvantages of
          stub areas, TSSAs, NSSAs, Type 7 LSAs. <br />
          <span>Hands on</span> Stub and TSSA configuration. </p>
        <li>IS-IS</li>
        <p> End systems, Intermediate systems, how IS-IS
          works, IS-IS router ID, Level 1, Level 2, IS-IS
          hierarchy. <br />
          <span>Hands on</span> Configuring IS-IS,
          troubleshooting IS-IS. </p>
        <li>The Internet</li>
        <p> Autonomous systems, Peering, transit, looking
          glasses. <br />
          <span>Hands on</span> Internet routing tables. </p>
        <li>Basic BGP</li>
        <p> IGPs, EGPs, What's BGP? BGP RIB, in/out
          process, tables peers, adding routes. <br />
          <span>Hands on</span> Simple configuration and troubleshooting. </p>
        <li>Routing IPv6</li>
        <p> Multi protocol routing, IPv6 addressing, IPv6
          routing tables, IPv6 static routes, OSPFv3, IS-IS
          and IPv6. <br />
          <span>Hands on</span> Routing IPv6. </p>
        <li>STP and L2 routing</li>
        <p> STP, RSTP, L2 IS-IS, Multi system link
          aggregation. <br />
          <span>Hands on</span> RSTP. </p>
        <li>MPLS</li>
        <p> Core MPLS, MPLS and the 7 layer model, MPLS
          protocol, MPLS standard, MPLS runs on routers,
          MPLS history, Why MPLS?, LSRs, PE and P
          router roles, FEC, swapping labels, MPLS packet
          format. <br />
          <span>Hands on</span> Enabling MPLS. Testing and
          troubleshooting of MPLS. </p>
        <li>Appendix</li>
        <p>  EIGRP: How EIGRP works, DUAL. </p>
      </ul>

LINX 2

<h3><b>Definitive IP routing training course description</b></h3>
        <p>An intensive hands on IP routing course leading to
          LINX Accredited Internet Technician stage 2 focusing
          on routing in an IP environment. The course
          concentrates on OSPF and IS-IS but also covers BGP
          and MPLS. Hands on sessions are used to reinforce
          the theory rather than teach specific manufacturer
          equipment. <br />
          <b>A multiple choice exam, leading to the LAIT II
          certification, is available after the course. The exam
          consists of 60 questions and lasts 2.0 hours. </b> </p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
        <li>Calculate subnet numbers in seconds.</li>
        <li>Configure and troubleshoot static routes.</li>
        <li>Explain how OSPF works.</li>
        <li>Build resilient networks with VRRP and OSPF.</li>
        <li>Implement and troubleshoot OSPF, IS-IS and
          VLANS.</li>
        <li>Evaluate and choose appropriate routing protocols for particular scenarios.</li>
        </ul>
        <b>An optional multiple choice exam, leading to the LAIT II certification, is included at the end of the course. The exam consists of 60 questions and lasts 2.0 hours.</b>
        <h5>
        <b>Definitive IP routing training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Network engineers </p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>TCP/IP Foundation for engineers</p>
              
							<li><b>Duration</b></li>
							
              <p>5 days</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Definitive IP routing training course contents</b></h3>
      <ul>
        <li>Basic routing</li>
        <p> Review of LAIT I routing, reading routing tables. <br />
          
          <span>Hands on</span> Setting up a routed network. </p>
        <li>Static routes</li>
        <p> Why use static routes? Default routes. <br />
         
          <span>Hands on</span> Configuring static routes. </p>
        <li>First hop redundancy</li>
        <p> Default gateways, VRRP/HSRP/GLBP. Load
          sharing, critical IP addresses. <br />
          <span>Hands on</span> VRRP. </p>
        <li>Basic OSPF</li>
        <p> What is OSPF? Process IDs, passive interfaces. <br />
          <span>Hands on</span> Simple OSPF. </p>
        <li>Subnetting</li>
        <p> Bit boundary subnetting, calculating network
          numbers. <br />
         
          <span>Exercise:</span> Subnetting. </p>
        <li>OSPF overview</li>
        <p> Metrics, convergence, DV vs. Link state, IGPs,
          classless, OSPF features, load sharing, OSPF
          authentication. <br />
          <span>Hands on</span> OSPF features. </p>
        <li>OSPF within an area</li>
        <p> How OSPF works, LSAs, LSDB, router IDs, hellos,
          configuring hellos, exchange protocol. <br />
          <span>Hands on</span> Investigating OSPF structures.
			
         </p>
        <li> OSPF areas</li>
        <p>
          Scalability, why areas? Area IDs, area 0, ABRs,
          ABR resilience, areas &amp; LSDBs &amp; LSAs, virtual
          links. <br />
          <span>Hands on</span> Multi area OSPF. </p>
        <li>Redistribution</li>
        <p> Multiple routing protocols, common scenarios,
          routing distance, External LSAs, E1 and E2. Type
          4 LSAs. OSPF and default routes. <br />
          <span>Hands on</span> Configuring static route redistribution. </p>
        <li>Route aggregation</li>
        <p> Route summarisation. How to aggregate, CIDR,
          ASBR summarisation. <br />
          <span>Hands on</span> OSPF address
          summarisation. </p>
        <li>OSPF packet formats</li>
        <p> OSPF packets, protocol stack, packet flows,
          OSPF headers, neighbours, neighbour states,
          DRs, adjacencies, BDRs, DR election. <br />
          <span>Hands on</span> Analysing OSPF packets, troubleshooting. OSPF </p>
        <li>OSPF stub areas</li>
        <p> LSA types, area types, area architecture, stub
          areas, default routes, benefits &amp; disadvantages of
          stub areas, TSSAs, NSSAs, Type 7 LSAs. <br />
          <span>Hands on</span> Stub and TSSA configuration. </p>
        <li>IS-IS</li>
        <p> End systems, Intermediate systems, how IS-IS
          works, IS-IS router ID, Level 1, Level 2, IS-IS
          hierarchy. <br />
          <span>Hands on</span> Configuring IS-IS,
          troubleshooting IS-IS. </p>
        <li>The Internet</li>
        <p> Autonomous systems, Peering, transit, looking
          glasses. <br />
          <span>Hands on</span> Internet routing tables. </p>
        <li>Basic BGP</li>
        <p> IGPs, EGPs, What's BGP? BGP RIB, in/out
          process, tables peers, adding routes. <br />
          <span>Hands on</span> Simple configuration and troubleshooting. </p>
        <li>Routing IPv6</li>
        <p> Multi protocol routing, IPv6 addressing, IPv6
          routing tables, IPv6 static routes, OSPFv3, IS-IS
          and IPv6. <br />
          <span>Hands on</span> Routing IPv6. </p>
        <li>STP and L2 routing</li>
        <p> STP, RSTP, L2 IS-IS, Multi system link
          aggregation. <br />
          <span>Hands on</span> RSTP. </p>
        <li>MPLS</li>
        <p> Core MPLS, MPLS and the 7 layer model, MPLS
          protocol, MPLS standard, MPLS runs on routers,
          MPLS history, Why MPLS?, LSRs, PE and P
          router roles, FEC, swapping labels, MPLS packet
          format. <br />
          <span>Hands on</span> Enabling MPLS. Testing and
          troubleshooting of MPLS. </p>
        <li>Appendix</li>
        <p>  EIGRP: How EIGRP works, DUAL. </p>
      </ul>

Definitive IP routing for engineers

<h3><b>Network+ training course description</b></h3>
        <p>This network+ course covers the TCP/IP side of the
exam. For delegates to pass the exam it is important
that they meet the prerequisites, self study is also
required. An intensive hands on IP foundation. The
course focuses on all parts of TCP/IP including layers 4
to 7 on end stations as well as layer 3 on routers. The
TCP/IP protocols are also studied to enable delegates
to be able to troubleshoot TCP/IP using Wireshark.
Hands on sessions are used to reinforce the theory
rather than teach specific manufacturer equipment.
 </p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
        <li>Use ping, traceroute and other tools to diagnose
          faults on a network.</li>
        <li>Configure IP on PCs and routers.</li>
        <li>Plan IP addresses and subnets.</li>
        <li>Analyse IP and TCP packets using an analyser.</li>
        <li>Troubleshoot TCP/IP.</li>
        </ul>
        <h5>
        <b>Network+ training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Those wishing to pass the Network+ exam.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>Introduction to data communications &amp; networking</p>
              
							<li><b>Duration</b></li>
							
              <p>5 days</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Network+ training course contents</b></h3>
      <ul>
        <li>What is TCP/IP?</li>
        <p> TCP and IP are protocols, 7 layer model, network
          layers, hardware/software layers, internetworking,
          protocols, What is IP? What is TCP? The internet,
          The IAB, RFCs.</p>
        <li> Ping and Wireshark</li>
        <p> Host configuration, IP addresses, subnet masks,
          default gateways, ping. <br />
          <span>Hands on </span>Base configuration. Testing
          with ping. Analysing packets with Wireshark. </p>
        <li>Switches and Wireshark</li>
        <p> Switches versus hubs, layer 2 forwarding table,
          flooding, broadcasts.<br />
          <span>Hands on</span> Building a
          switched based network. </p>
        <li>Configuring network devices</li>
        <p> Configuration options, console port, putty, telnet. <br />
          <span>Hands on</span> Configuring switches, telnet. </p>
        <li>IP</li>
        <p> IP packet format, protocol field, TTL, DiffServ,
          fragments, ICMP. <br />
          <span>Hands on</span> IP packet analysis. </p>
        <li>IP addressing</li>
        <p> 32 bits, dotted decimal, rules, networks, role of
          subnet masks, simple subnetting, prefix notation.
          Broadcasts, special use addresses. <br />
          <span>Hands on</span> Planning and implementing addressing. </p>
        <li>IP and the lower layers</li>
        <p> ARP, media not supporting ARP. <br />
          <span>Hands on</span> ARP. </p>
        <li>Routing</li>
        <p> What are routers? What routers do, default
          gateways, routing and addressing, routing tables,
          ways to update routing tables. <br />
          <span>Hands on</span> Building
          a routed network, traceroute. </p>
        <li>Routing protocols</li>
        <p> IGPs and EGPs, RIP, RIPv2, Why not to use RIP,
          OSPF, OSPF metrics, convergence, distance
          vector protocols, link state protocols. <br />
          <span>Hands on</span> OSPF, analysing routing tables, loopbacks. </p>
        <li>Network simulators</li>
        <p> Network simulators, EVE-NG, GNS3, CML. <br />
          <span>Hands on</span> Using EVE-NG. </p>
        <li>Subnetting</li>
        <p> Subnetting to the bit level, ranges, how prefixes
          are used. <br />
          <span>Hands on</span> Subnetting. </p>
        <li>VLANS and IP addressing</li>
        <p> What are VLANs, tagging, 802.1Q, Inter VLAN
          routing. <br />
          <span>Hands on</span> Inter VLAN routing. </p>
        <li>TCP and UDP</li>
        <p> Layer 4, port numbers, client ports, broadcasts
          multicasts and layer 4, UDP header, TCP header,
          connections, ACK, sliding windows, options,
          connection states. Sockets. <br />
          <span>Hands on</span> Analysing
          TCP packets. </p>
        <li>IPv4 address configuration</li>
        <p> Private addresses, NAT, NAPT, dynamic
          addressing, DHCP, link local addresses. <br />
          <span>Hands on</span> DHCP, NAT. </p>
        <li>IPv6</li>
        <p> What is IPv6, 128 bit addresses, address formats,
          IPv6 address allocation, header format, migration,
          dual stack, tunnelling, NAT64, DNS64. <br />
          <span>Hands on</span> IPv6 setup troubleshooting. </p>
        <li>IPv6 address configuration</li>
        <p> Static addressing, EUI-64 addresses, IPv6
          address order, SLAAC, DHCPv6. <br />
          <span>Hands on</span> SLAAC. </p>
        <li>Applications</li>
        <p> Clients, servers, HTTP, Email, resource sharing,
          VoIP, video, terminal emulation, remote desktop.
          Network management and SNMP.<br />
          <span>Hands on</span> Servers, TFTP, VoIP packet analysis. </p>
        <li>DNS</li>
        <p> Names and addresses, hosts file, how DNS
          works. FQDNs, DNS client configuration. <br />
          <span>Hands on</span> Troubleshooting DNS. </p>
        <li>Security</li>
        <p> Firewalls, firewall architectures, DMZ, how
          firewalls work, proxy servers, filtering, ACLs, IDS,
          VPNs, authentication, encryption, tunnels, secure
          protocols. <br />
          <span>Hands on</span> Firewalls, SSH </p>
        <li>Troubleshooting</li>
        <p> Methods, tools. Using the 7 layer model.
          Troubleshooting toolkits. <br />
          <span>Hands on</span> Fixing the
          network. </p>
      </ul>

Network +

London

<h2>Leading Cross-Cultural Virtual Teams: In-House Training</h2>
 <p>High-performing teams are a must in this world of intense competition and higher expectations. Global virtual teaming has become a necessity as organizations become increasingly distributed and suppliers and clients actively engage in joint projects. Teams work across geographical and organizational boundaries to deliver solutions and services to global users where distance and differences, both geographic and cultural, amplify the effect of issues and factors that are relatively straightforward when managing a team of people in the same location.</p>
 <p>This course delivers practical concepts and techniques that participants will start using immediately on their global projects.</p><h3>What you will Learn</h3>
 <p>At the end of this program, you will be able to:</p>
 <ul>
 <li>Define relationships among foundational concepts (leadership and three dimensions of diversity) and explain their potential impacts on project performance</li>
 <li>Describe key components of successful project leadership and build selected Transformational Leadership skills</li>
 <li>Prepare to convert project challenges stemming from personal or cultural diversity into potential competitive advantage</li>
 <li>Implement selected best practices to meet key challenges facing virtual project teams</li>
 <li>Foster and grow an environment that supports continued success for CCVTs</li>
 </ul><section>
                    <h3>Foundation Concepts</h3> <ul> <li>Basic definitions</li> <li>Critical success factors for leading cross-cultural virtual teams (CCVTs)</li> <li>A roadmap to success for leading CCVTs</li> </ul> <h3>Leadership Excellence in Any Project Environment</h3> <ul> <li>Leading effectively in a global environment</li> <li>Transformational leadership</li> <li>The four components of Transformational Leadership</li> </ul> <h3>Leveraging Personal Diversity</h3> <ul> <li>Overview of personal diversity</li> <li>Mind styles</li> <li>The theory of multiple intelligences</li> <li>Connecting Transformational Leadership and personal diversity</li> </ul> <h3>Embracing Cultural Diversity</h3> <ul> <li>Introduction to cultural intelligence</li> <li>The impact of culture</li> <li>Cultural Dimensions Theory</li> <li>The Culture Map</li> </ul> <h3>Managing Virtual Diversity</h3> <ul> <li>Overview of virtual diversity</li> <li>Virtual time management</li> <li>Virtual processes and technology</li> <li>Virtual leadership</li> </ul> <h3>Creating an Environment for Success</h3> <ul> <li>Supporting a cross-cultural virtual-team (CCVT-) friendly environment</li> <li>Building a foundation of trust</li> <li>Developing a team charter</li> <li>Recap and review</li> </ul> <h3>Summary and Next Steps</h3> <ul> <li>Personal action plan</li> </ul>


                </section>

IIL Europe Ltd

Leading Cross-Cultural Virtual Teams: In-House Training

<h2>Virtual Agile Teams: In-House Training</h2>
 <p>Agile teams are a must in this world of intense competition, marketing demands, and changing expectations. Global virtual teaming has become a necessity as organizations become increasingly distributed, with suppliers and clients actively engaged in joint projects. Agile Teams now work across geographical, organizational, and cultural boundaries to deliver solutions and services to global users. Distance and differences may amplify the effect of issues and factors that are relatively straightforward for co-located Agile teams.</p>
 <p>This workshop delivers practical concepts and techniques that participants will start using immediately with their virtual Agile teams. The goal of the course is to enable you to successfully execute your preferred Agile or Scrum methods in a virtual project team environment.</p><h3>What you will Learn</h3>
 <p>At the end of this program, you will be able to:</p>
 <ul>
 <li>Explain the characteristics of a virtual team and how they differ from a co-located team</li>
 <li>Build an effective virtual Agile team using a Team Charter approach</li>
 <li>Develop Release Plans, including prioritizing user stories, with a virtual Agile Team</li>
 <li>Construct a Sprint plan, including effective user story estimates, virtually</li>
 <li>Execute a Sprint, including essential Agile or Scrum ceremonies, virtually</li>
 <li>Conduct effective virtual meetings in an environment supportive of Agile and Scrum methods</li>
 </ul><section>
                    <h3>Foundation Concepts</h3> <ul> <li>Agile Mindset and Values</li> <li>Agile Benefits and Methods</li> <li>Scrum Overview</li> <li>Co-located vs. Virtual Teams</li> </ul> <h3>Forming Virtual Agile Teams</h3> <ul> <li>Exploring Virtual Leadership</li> <li>Focusing on Virtual Agile Leaders</li> <li>Developing a Virtual Agile Team Charter</li> <li>Meeting Team Challenges in a Virtual Environment</li> </ul> <h3>Planning Releases with a Virtual Agile Team</h3> <ul> <li>Planning releases overview</li> <li>Estimating user stories</li> <li>Prioritizing user stories</li> <li>Setting release parameters</li> <li>Getting consensus on the release plan</li> </ul> <h3>Planning a Sprint for a Virtual Project</h3> <ul> <li>Sprint Planning Overview</li> <li>Confirming Sprint Scope with Virtual Agile Teams</li> <li>Developing a Sprint Delivery Plan for Virtual Agile Teams</li> </ul> <h3>Running a Sprint in a Virtual Environment</h3> <ul> <li>Self-organizing a Sprint for a Virtual Agile Team</li> <li>Using Scrum tools in a Virtual Environment</li> <li>Conducting End of Sprint Meetings in a Virtual Environment</li> <li>Iterating as a Virtual Agile Team</li> </ul> <h3>Creating an Environment for Success</h3> <ul> <li>Piloting a virtual Agile team</li> <li>Creating an Agile-friendly virtual environment</li> </ul>


                </section>

Virtual Agile Teams: In-House Training

<h3><b>LINX 1 training course description</b></h3>
        <p>An intensive hands on IP foundation leading to LINX
Accredited Internet Technician stage 1. The course
focuses on all parts of TCP/IP including layers 4 to 7 on
end stations as well as layer 3 on routers. The TCP/IP
protocols are also studied to enable delegates to be
able to troubleshoot TCP/IP using Wireshark. Hands on
sessions are used to reinforce the theory rather than
teach specific manufacturer equipment.<br />
          <b>A multiple choice exam, leading to the LAIT I
certification, is available after the course. The exam
consists of 40 questions and lasts 1.5 hours.</b> </p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
        <li>Use ping, traceroute and other tools to diagnose
          faults on a network.</li>
        <li>Configure IP on PCs and routers.</li>
        <li>Plan IP addresses and subnets.</li>
        <li>Analyse IP and TCP packets using an analyser.</li>
        <li>Troubleshoot TCP/IP.</li>
        </ul>
        <h5>
        <b>LINX 1 training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Network engineers.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>None. </p>
              
							<li><b>Duration</b></li>
							
              <p>5 days</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>LINX 1 training course contents</b></h3>
      <ul>
        <li>What is TCP/IP?</li><p> 
TCP and IP are protocols, 7 layer model, network
layers, hardware/software layers, internetworking,
protocols, What is IP? What is TCP? The internet,
The IAB, RFCs.</p><li>
		  
		  Ping and Wireshark</li><p> 
		  Host configuration, IP addresses, subnet masks,
default gateways, ping.  
		  <br /><span>Hands on </span>Base configuration. Testing
          with ping. Analysing packets with Wireshark.
		  
         </p><li>Switches and Wireshark</li><p>
Switches versus hubs, layer 2 forwarding table,
flooding, broadcasts.<br /><span>Hands on</span> Building a
switched based network.
</p><li>Configuring network devices</li><p>
Configuration options, console port, putty, telnet.
<br /><span>Hands on</span> Configuring switches, telnet.
</p><li>IP</li><p>
IP packet format, protocol field, TTL, DiffServ,
fragments, ICMP. <br /><span>Hands on</span> IP packet analysis.
</p><li>IP addressing</li><p>
32 bits, dotted decimal, rules, networks, role of
subnet masks, simple subnetting, prefix notation.
Broadcasts, special use addresses. <br /><span>Hands on</span>
Planning and implementing addressing.
</p><li>IP and the lower layers</li><p>
ARP, media not supporting ARP. <br /><span>Hands on</span> ARP.
</p><li>Routing</li><p>
What are routers? What routers do, default
gateways, routing and addressing, routing tables,
ways to update routing tables. <br /><span>Hands on</span> Building
a routed network, traceroute.
</p><li>Routing protocols</li><p>
IGPs and EGPs, RIP, RIPv2, Why not to use RIP,
OSPF, OSPF metrics, convergence, distance
vector protocols, link state protocols. <br /><span>Hands on</span>
OSPF, analysing routing tables, loopbacks.
</p><li>Network simulators</li><p>
Network simulators, EVE-NG, GNS3, CML. <br /><span>Hands on</span> Using EVE-NG.
</p><li>Subnetting</li><p>
Subnetting to the bit level, ranges, how prefixes
are used. <br /><span>Hands on</span> Subnetting.
</p><li>VLANS and IP addressing</li><p>
What are VLANs, tagging, 802.1Q, Inter VLAN
routing. <br /><span>Hands on</span> Inter VLAN routing.
</p><li>TCP and UDP</li><p>
Layer 4, port numbers, client ports, broadcasts
multicasts and layer 4, UDP header, TCP header,
connections, ACK, sliding windows, options,
connection states. Sockets. <br /><span>Hands on</span> Analysing
TCP packets.
</p><li>IPv4 address configuration</li><p>
Private addresses, NAT, NAPT, dynamic
addressing, DHCP, link local addresses. <br /><span>Hands on</span> DHCP, NAT.
</p><li>IPv6</li><p>
What is IPv6, 128 bit addresses, address formats,
IPv6 address allocation, header format, migration,
dual stack, tunnelling, NAT64, DNS64. <br /><span>Hands on</span>
IPv6 setup troubleshooting.
</p><li>IPv6 address configuration</li><p>
Static addressing, EUI-64 addresses, IPv6
address order, SLAAC, DHCPv6. <br /><span>Hands on</span>
SLAAC.
</p><li>Applications</li><p>
Clients, servers, HTTP, Email, resource sharing,
VoIP, video, terminal emulation, remote desktop.
Network management and SNMP.<br /><span>Hands on</span>
Servers, TFTP, VoIP packet analysis.
</p><li>DNS</li><p>
Names and addresses, hosts file, how DNS
works. FQDNs, DNS client configuration. <br /><span>Hands on</span> Troubleshooting DNS.
</p><li>Security</li><p>
Firewalls, firewall architectures, DMZ, how
firewalls work, proxy servers, filtering, ACLs, IDS,
VPNs, authentication, encryption, tunnels, secure
protocols. <br /><span>Hands on</span> Firewalls, SSH
</p><li>Troubleshooting</li><p>
Methods, tools. Using the 7 layer model.
Troubleshooting toolkits. <br /><span>Hands on</span> Fixing the
network. </p>
      </ul>

LINX 1

<h3><b>TCP/IP training course description</b></h3>
        <p>An intensive hands on IP foundation leading to LINX
          Accredited Internet Technician stage 1. The course
          focuses on all parts of TCP/IP including layers 4 to 7 on
          end stations as well as layer 3 on routers. The TCP/IP
          protocols are also studied to enable delegates to be
          able to troubleshoot TCP/IP using Wireshark. Hands on
          sessions are used to reinforce the theory rather than
          teach specific manufacturer equipment.<br />
          <b>A multiple choice exam, leading to the LAIT I
          certification, is available after the course. The exam
          consists of 40 questions and lasts 1.5 hours.</b> </p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
        <li>Use ping, traceroute and other tools to diagnose
          faults on a network.</li>
        <li>Configure IP on PCs and routers.</li>
        <li>Plan IP addresses and subnets.</li>
        <li>Analyse IP and TCP packets using an analyser.</li>
        <li>Troubleshoot TCP/IP.</li>
        </ul>
        <h5>
        <b>TCP/IP training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Network engineers.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p> None </p>
              
							<li><b>Duration</b></li>
							
              <p>5 days</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>TCP/IP training course contents</b></h3>
      <ul>
        <li>What is TCP/IP?</li>
        <p> TCP and IP are protocols, 7 layer model, network
          layers, hardware/software layers, internetworking,
          protocols, What is IP? What is TCP? The internet,
          The IAB, RFCs.</p>
        <li> Ping and Wireshark</li>
        <p> Host configuration, IP addresses, subnet masks,
          default gateways, ping. <br />
          <span>Hands on </span>Base configuration. Testing
          with ping. Analysing packets with Wireshark. </p>
        <li>Switches and Wireshark</li>
        <p> Switches versus hubs, layer 2 forwarding table,
          flooding, broadcasts.<br />
          <span>Hands on</span> Building a
          switched based network. </p>
        <li>Configuring network devices</li>
        <p> Configuration options, console port, putty, telnet. <br />
          <span>Hands on</span> Configuring switches, telnet. </p>
        <li>IP</li>
        <p> IP packet format, protocol field, TTL, DiffServ,
          fragments, ICMP. <br />
          <span>Hands on</span> IP packet analysis. </p>
        <li>IP addressing</li>
        <p> 32 bits, dotted decimal, rules, networks, role of
          subnet masks, simple subnetting, prefix notation.
          Broadcasts, special use addresses. <br />
          <span>Hands on</span> Planning and implementing addressing. </p>
        <li>IP and the lower layers</li>
        <p> ARP, media not supporting ARP. <br />
          <span>Hands on</span> ARP. </p>
        <li>Routing</li>
        <p> What are routers? What routers do, default
          gateways, routing and addressing, routing tables,
          ways to update routing tables. <br />
          <span>Hands on</span> Building
          a routed network, traceroute. </p>
        <li>Routing protocols</li>
        <p> IGPs and EGPs, RIP, RIPv2, Why not to use RIP,
          OSPF, OSPF metrics, convergence, distance
          vector protocols, link state protocols. <br />
          <span>Hands on</span> OSPF, analysing routing tables, loopbacks. </p>
        <li>Network simulators</li>
        <p> Network simulators, EVE-NG, GNS3, CML. <br />
          <span>Hands on</span> Using EVE-NG. </p>
        <li>Subnetting</li>
        <p> Subnetting to the bit level, ranges, how prefixes
          are used. <br />
          <span>Hands on</span> Subnetting. </p>
        <li>VLANS and IP addressing</li>
        <p> What are VLANs, tagging, 802.1Q, Inter VLAN
          routing. <br />
          <span>Hands on</span> Inter VLAN routing. </p>
        <li>TCP and UDP</li>
        <p> Layer 4, port numbers, client ports, broadcasts
          multicasts and layer 4, UDP header, TCP header,
          connections, ACK, sliding windows, options,
          connection states. Sockets. <br />
          <span>Hands on</span> Analysing
          TCP packets. </p>
        <li>IPv4 address configuration</li>
        <p> Private addresses, NAT, NAPT, dynamic
          addressing, DHCP, link local addresses. <br />
          <span>Hands on</span> DHCP, NAT. </p>
        <li>IPv6</li>
        <p> What is IPv6, 128 bit addresses, address formats,
          IPv6 address allocation, header format, migration,
          dual stack, tunnelling, NAT64, DNS64. <br />
          <span>Hands on</span> IPv6 setup troubleshooting. </p>
        <li>IPv6 address configuration</li>
        <p> Static addressing, EUI-64 addresses, IPv6
          address order, SLAAC, DHCPv6. <br />
          <span>Hands on</span> SLAAC. </p>
        <li>Applications</li>
        <p> Clients, servers, HTTP, Email, resource sharing,
          VoIP, video, terminal emulation, remote desktop.
          Network management and SNMP.<br />
          <span>Hands on</span> Servers, TFTP, VoIP packet analysis. </p>
        <li>DNS</li>
        <p> Names and addresses, hosts file, how DNS
          works. FQDNs, DNS client configuration. <br />
          <span>Hands on</span> Troubleshooting DNS. </p>
        <li>Security</li>
        <p> Firewalls, firewall architectures, DMZ, how
          firewalls work, proxy servers, filtering, ACLs, IDS,
          VPNs, authentication, encryption, tunnels, secure
          protocols. <br />
          <span>Hands on</span> Firewalls, SSH </p>
        <li>Troubleshooting</li>
        <p> Methods, tools. Using the 7 layer model.
          Troubleshooting toolkits. <br />
          <span>Hands on</span> Fixing the
          network. </p>
      </ul>

TCP/IP foundation for engineers

<h3><b>Network fundamentals training course description</b></h3>
        <p>An intensive hands on IP foundation leading to LINX
          Accredited Internet Technician stage 1. The course
          focuses on all parts of TCP/IP including layers 4 to 7 on
          end stations as well as layer 3 on routers. The TCP/IP
          protocols are also studied to enable delegates to be
          able to troubleshoot TCP/IP using Wireshark. Hands on
          sessions are used to reinforce the theory rather than
          teach specific manufacturer equipment.<br />
          <b>A multiple choice exam, leading to the LAIT I
          certification, is available after the course. The exam
          consists of 40 questions and lasts 1.5 hours.</b> </p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
        <li>Use ping, traceroute and other tools to diagnose
          faults on a network.</li>
        <li>Configure IP on PCs and routers.</li>
        <li>Plan IP addresses and subnets.</li>
        <li>Analyse IP and TCP packets using an analyser.</li>
        <li>Troubleshoot TCP/IP.</li>
        </ul>
        <h5>
        <b>Network fundamentals training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Network engineers.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p> None </p>
              
							<li><b>Duration</b></li>
							
              <p>5 days</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Network fundamentals training course contents</b></h3>
      <ul>
        <li>What is TCP/IP?</li>
        <p> TCP and IP are protocols, 7 layer model, network
          layers, hardware/software layers, internetworking,
          protocols, What is IP? What is TCP? The internet,
          The IAB, RFCs.</p>
        <li> Ping and Wireshark</li>
        <p> Host configuration, IP addresses, subnet masks,
          default gateways, ping. <br />
          <span>Hands on </span>Base configuration. Testing
          with ping. Analysing packets with Wireshark. </p>
        <li>Switches and Wireshark</li>
        <p> Switches versus hubs, layer 2 forwarding table,
          flooding, broadcasts.<br />
          <span>Hands on</span> Building a
          switched based network. </p>
        <li>Configuring network devices</li>
        <p> Configuration options, console port, putty, telnet. <br />
          <span>Hands on</span> Configuring switches, telnet. </p>
        <li>IP</li>
        <p> IP packet format, protocol field, TTL, DiffServ,
          fragments, ICMP. <br />
          <span>Hands on</span> IP packet analysis. </p>
        <li>IP addressing</li>
        <p> 32 bits, dotted decimal, rules, networks, role of
          subnet masks, simple subnetting, prefix notation.
          Broadcasts, special use addresses. <br />
          <span>Hands on</span> Planning and implementing addressing. </p>
        <li>IP and the lower layers</li>
        <p> ARP, media not supporting ARP. <br />
          <span>Hands on</span> ARP. </p>
        <li>Routing</li>
        <p> What are routers? What routers do, default
          gateways, routing and addressing, routing tables,
          ways to update routing tables. <br />
          <span>Hands on</span> Building
          a routed network, traceroute. </p>
        <li>Routing protocols</li>
        <p> IGPs and EGPs, RIP, RIPv2, Why not to use RIP,
          OSPF, OSPF metrics, convergence, distance
          vector protocols, link state protocols. <br />
          <span>Hands on</span> OSPF, analysing routing tables, loopbacks. </p>
        <li>Network simulators</li>
        <p> Network simulators, EVE-NG, GNS3, CML. <br />
          <span>Hands on</span> Using EVE-NG. </p>
        <li>Subnetting</li>
        <p> Subnetting to the bit level, ranges, how prefixes
          are used. <br />
          <span>Hands on</span> Subnetting. </p>
        <li>VLANS and IP addressing</li>
        <p> What are VLANs, tagging, 802.1Q, Inter VLAN
          routing. <br />
          <span>Hands on</span> Inter VLAN routing. </p>
        <li>TCP and UDP</li>
        <p> Layer 4, port numbers, client ports, broadcasts
          multicasts and layer 4, UDP header, TCP header,
          connections, ACK, sliding windows, options,
          connection states. Sockets. <br />
          <span>Hands on</span> Analysing
          TCP packets. </p>
        <li>IPv4 address configuration</li>
        <p> Private addresses, NAT, NAPT, dynamic
          addressing, DHCP, link local addresses. <br />
          <span>Hands on</span> DHCP, NAT. </p>
        <li>IPv6</li>
        <p> What is IPv6, 128 bit addresses, address formats,
          IPv6 address allocation, header format, migration,
          dual stack, tunnelling, NAT64, DNS64. <br />
          <span>Hands on</span> IPv6 setup troubleshooting. </p>
        <li>IPv6 address configuration</li>
        <p> Static addressing, EUI-64 addresses, IPv6
          address order, SLAAC, DHCPv6. <br />
          <span>Hands on</span> SLAAC. </p>
        <li>Applications</li>
        <p> Clients, servers, HTTP, Email, resource sharing,
          VoIP, video, terminal emulation, remote desktop.
          Network management and SNMP.<br />
          <span>Hands on</span> Servers, TFTP, VoIP packet analysis. </p>
        <li>DNS</li>
        <p> Names and addresses, hosts file, how DNS
          works. FQDNs, DNS client configuration. <br />
          <span>Hands on</span> Troubleshooting DNS. </p>
        <li>Security</li>
        <p> Firewalls, firewall architectures, DMZ, how
          firewalls work, proxy servers, filtering, ACLs, IDS,
          VPNs, authentication, encryption, tunnels, secure
          protocols. <br />
          <span>Hands on</span> Firewalls, SSH </p>
        <li>Troubleshooting</li>
        <p> Methods, tools. Using the 7 layer model.
          Troubleshooting toolkits. <br />
          <span>Hands on</span> Fixing the
          network. </p>
      </ul>

Network fundamentals for engineers

<h3>Networks demystified training course description</h3> 
				<p>A concise overview course covering all aspects of networking with particular emphasis of use of the 7 layer model as a framework for discussing and learning new network terms enabling delegates to recognise the main buzzwords used in the industry.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
        <li>Use the 7 layer model to classify networking terms.</li>
					<li>Differentiate between LANS and WANS.</li>
                    <li>Recognise bandwidth measurements.</li>
                    <li>List LAN and WAN technologies.</li>
                    <li>Recognise cabling issues in a network. </li>
                  </ul>
       
        <h5>
        <b>Networks demystified training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Sales staff, managers and other non-technical personnel.<br />
Technical personnel may benefit more from our Intro to data communications and networking course.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>None.</p>
              
							<li><b>Duration</b></li>
							
              <p>1 day
						</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Networks demystified training course contents</b></h3>
      <ul>
				<li>What are networks?</li><p>
What is a network? Types of network, Local Area
Networks (LANs), Wide Area Networks (WANs),
connecting networks together with routers.
</p><li>The 7 layer model</li><p>
What is the 7 layer model? The importance of
standards, using the 7 layer model to classify
networking terms.
</p><li>Cables</li><p>
Copper, Fibre, Air, standards, connectors, LAN
cables, WAN cables, distance limitations, hubs and
repeaters, other issues. The radio spectrum.
</p><li>Bandwidth</li><p>
Bits and bytes. Bandwidth measurements,
common technologies and their bandwidth, the
impact of applications on bandwidth. Full and half
duplex. Joining cables together to increase
bandwidth (Link aggregation).
</p><li>LANs and WANs</li><p>
What is Ethernet? What is WiFi? What are Leased
lines? What is MPLS?
</p><li>Ethernet switches</li><p>
Ethernet 'packets', MAC addresses, what is a
switch, what is the difference between a hub and a
switch.
</p><li>TCP/IP</li><p>
What is TCP/IP? What is a protocol? What is IP?
What is TCP? The role of routers in joining LANS
and WANS, What is the Internet?
	</p><li>Applications</li><p>
Ways to use the network, clients, servers, web
browsing and HTTP, Email, instant messaging,
multimedia applications.
</p>
      </ul>

Networks demystified

<div id="course-pills-1">Duration<p>2 Days</p><p>12 CPD hours</p>This course is intended for<p>The primary audience for this course is any IT, facilities or data centre professional, consultant and/or those who work in network cabling system design, implementation and operation.</p>Overview<p>With few exceptions, enterprises today rely on IT for the delivery of business-critical services - often directly to the end consumer.</p><p>It is therefore vital that the mission-critical data centre is designed, maintained and operated with high-availability and efficiency in mind. Among all the facilities, network cabling is the foundation for the network and one of the major contributors to the availability of the data center.CNCDPÂ© is a 2-day course designed to expose participants to in-depth knowledge in designing and installing the data network cabling system which includes key subject matters such as; technical standards, designing of different cabling sub-systems, calculation of material requirements, architecture, installation, testing and acceptance.</p></div><div id="course-pills-2"><h4>Introduction to Structured Cabling System (SCS)</h4><ul><li>Brief history of SCS</li><li>Basic copper and fibre transmission</li><li>Copper and fibre cabling</li><li>Single and multimode fibre</li><li>Step/graded index multimode fibre</li><li>Difference between Commercial Wiring and data centre cabling</li><li>Development of standards</li><li>Role of standards</li><li>ANSI/TIA 568 standard</li><li>Common standards</li><li>The new usage of cabling to support Smart building</li></ul><h4>Horizontal and Administration - Commercial Building</h4><ul><li>Standard diagram recap: ANSI/TIA-568</li><li>Functional elements and example</li><li>Scenario A: Determine the number of work areas</li><li>Scenario B: Determine the number of user locations</li><li>Zone wiring</li><li>Administration: Interconnect and cross-connect</li><li>Angled and flat panels</li><li>Creating a cabling schematic design</li><li>Convert schematic into physical layout</li><li>Calculating the material list</li></ul><h4>Horizontal and Administration - Data Centre</h4><ul><li>Standard diagram recap: TIA-942</li><li>Basic/Reduced/Typical data centre setup</li><li>Traditional 3 layers network design/ Spine and Leaf network design</li><li>Select termination hardware</li><li>Administration design</li><li>ToR/EoR/Spine &amp; Leaf cabling design</li><li>Network and cabling resiliency</li><li>Create cabling schematic design for ToR/EoR</li><li>Convert into patch panel/rack layout</li><li>Calculate the material list for ToR/EoR</li></ul><h4>Building Backbone - Commercial Building</h4><ul><li>Backbone diagram</li><li>Calculate the copper backbone requirements per Telecom Room (TR)</li><li>Calculate the fibre backbone requirements per Telecom Room</li><li>Summarize the building backbone requirements</li><li>Recognised cables</li><li>Backbone Patch panels</li><li>The maximum backbone distances</li><li>Create cabling schematic design</li><li>Converting the schematic design into patch panel/ rack layout</li></ul><h4>Building Backbone - Data Centre</h4><ul><li>TIA-942 based backbone topology</li><li>TIA-942 backbone requirements</li><li>Recognised backbone cable</li><li>ToR/EoR/Spine and Leaf</li><li>Backbone distance estimation</li><li>Resiliency of backbone cable routes</li><li>Creating cabling schematic design</li><li>Converting the schematic design into patch panel/ rack layout</li><li>Field and Fusion Termination for fibre connectors</li><li>Pre-terminated fibre trunk and copper cables</li></ul><h4>Architectural Considerations</h4><ul><li>ANSI/TIA569-D Cable pathway and spaces</li><li>Common requirements for the rooms</li><li>Definition of the rooms</li><li>Entrance Room/Demarcation</li><li>Ceiling and floor pathways types</li><li>Cable trays/basket/ladder/conduit</li><li>Inner duct/sleeve/slot</li><li>Calculating of pathway size</li><li>Cable run best practices</li><li>Cable management/AIM</li><li>Grounding and bonding</li><li>Separation distance requirements for copper cabling to power cabling</li><li>Fire stopping</li><li>Fire rated barrier</li><li>Fire rated jacket cable</li></ul><h4>Campus / Outdoor Backbone</h4><ul><li>Common campus cable installation and cable types : Aerial cable / Direct-buried / Underground in-conduit</li><li>Outdoor cable installation planning</li><li>Lightning / surge protection</li><li>Approved ground for surge protector</li><li>Creating a schematic diagram</li><li>Converting a schematic into a physical layout</li></ul><h4>Site Inspection and Testing</h4><ul><li>Visual site inspection notes</li><li>Installation common issues</li><li>Copper testing standard</li><li>Permanent link / Channel / Patch cord / MPTL testing configuration</li><li>Fibre connectors</li><li>Fibre testing standard</li><li>Tier 1 &amp; 2 certification</li><li>Fibre link definition</li><li>Fibre testing steps</li><li>Fibre inspection and cleaning</li><li>Calibrating the test sets - 3 methods</li><li>Setting up mandrel for testing</li><li>Fibre loss budget calculation</li><li>G.657 Bend insensitive fibre</li><li>Optical Time-Domain Reflectometer (OTDR)</li></ul><h4>Exam - Certified Network Cabling Design Professional (CNCDPÂ©)</h4><ul><li>The exam is a 60-minute closed book exam, with 40 multiple-choice questions.</li><li>The candidate requires a minimum of 27 correct answers to pass the exam.</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Network Cabling Design Professional (CNCDP) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Network Cabling Design Professional (CNCDP) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Nexus Human

Certified Technology Specialist (CTS)

Cisco Certified Network Professional certification (CCNP)

Construction Design & Management (CDM)

Structured Cabling

IT Networking Fundamentals

Computer Networking

Certified Network Cabling Design Professional (CNCDP)

Burnley

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">This course is the next step on your Reiki journey if you would like to be able to use Reiki at a higher level and work with clients/family</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">This level 2 Reiki course is for you if you want to give Reiki healing at a more intense level or give healing treatments to others. Here you are introduced to the Reiki symbols for the first time</p><ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Cho Ku Rei (power symbol)</li><li fr-original-style="" style="box-sizing: border-box;">Sei He Ki (emotional symbol)</li><li fr-original-style="" style="box-sizing: border-box;">Hon Sha Ze Sho Nen (distance healing symbol)</li></ul><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What will I learn on this course:-</strong></p><ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">How to use the Reiki sacred symbols</li><li fr-original-style="" style="box-sizing: border-box;">What is Distance Healing and how to use the distance symbol so you can send Reiki healing to others.</li><li fr-original-style="" style="box-sizing: border-box;">Have increased level 2 Reiki energy</li><li fr-original-style="" style="box-sizing: border-box;">How to practice Self-Healing using the increased energy</li><li fr-original-style="" style="box-sizing: border-box;">Hand positions when healing others</li><li fr-original-style="" style="box-sizing: border-box;">The 21 day Cleansing Process explained</li><li fr-original-style="" style="box-sizing: border-box;">Professional Ethics</li><li fr-original-style="" style="box-sizing: border-box;">Question and answer session</li></ul><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">You will be initiated to the Reiki energy by a level 2 attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"> </p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">The course can be booked online here and you will receive instructions on how to access the course.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(111, 114, 135);">I look forward to meeting you and sharing my knowledge and experience of Reiki with you.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What this course offers you</strong></p><ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Individual Support - During and after your course</li><li fr-original-style="" style="box-sizing: border-box;">Practical Experience - Step by step training is given so that you can gain valuable experience using Reiki</li><li fr-original-style="" style="box-sizing: border-box;">Energy Perception &ndash; You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel</li><li fr-original-style="" style="box-sizing: border-box;">Personal Growth - You will discover for yourself the increased level of Reiki healing and be able to use its methods of healing on others and have paying clients if you wish&nbsp;</li></ul><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why a Level 2 Course?&nbsp;</strong>Reiki at Level 2 is the level of training which is needed to practise Reiki healing professionally and have paying clients. Often reflexologists, aromatherapists and other complementary therapists add reiki healing to their range of healing skills that they offer their clients.&nbsp;</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">However it is not just for those who have clients it is also a powerful self-development technique for your own personal healing experience and to share with family/friends and give them the benefit of well-being.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">A certificate at Reiki Level One is needed for you to enrol on this course and I am happy to accept students who have trained elsewhere with another Reiki Master.</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The Reiki Two course is taught live on line using Zoom.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Testimonials:- What other students who have attended my courses are saying&nbsp;</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Level Two Course</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">&ldquo;She explains everything so well and makes it easy to understand and connect to the reiki. This is my 2nd course I&rsquo;ve done with Margaret&rdquo; (Louise B).</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">"Thank you, I thoroughly enjoyed the course." (Beverley S)</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">This is a very well organized and informative course! (Georgie P)</p>

This course is the next step on your Reiki journey if you would like to be able to use Reiki at a higher level and work with clients/family
This level 2 Reiki course is for you if you want to give Reiki healing at a more intense level or give healing treatments to others. Here you are introduced to the Reiki symbols for the first time
Cho Ku Rei (power symbol)
Sei He Ki (emotional symbol)
Hon Sha Ze Sho Nen (distance healing symbol)
What will I learn on this course:-
How to use the Reiki sacred symbols
What is Distance Healing and how to use the distance symbol so you can send Reiki healing to others.
Have increased level 2 Reiki energy
How to practice Self-Healing using the increased energy
Hand positions when healing others
The 21 day Cleansing Process explained
Professional Ethics
Question and answer session
You will be initiated to the Reiki energy by a level 2 attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course. 
I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.
The course can be booked online here and you will receive instructions on how to access the course.
I look forward to meeting you and sharing my knowledge and experience of Reiki with you.
What this course offers you
Individual Support - During and after your course
Practical Experience - Step by step training is given so that you can gain valuable experience using Reiki
Energy Perception – You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel
Personal Growth - You will discover for yourself the increased level of Reiki healing and be able to use its methods of healing on others and have paying clients if you wish
Why a Level 2 Course? Reiki at Level 2 is the level of training which is needed to practise Reiki healing professionally and have paying clients. Often reflexologists, aromatherapists and other complementary therapists add reiki healing to their range of healing skills that they offer their clients. 
However it is not just for those who have clients it is also a powerful self-development technique for your own personal healing experience and to share with family/friends and give them the benefit of well-being.
A certificate at Reiki Level One is needed for you to enrol on this course and I am happy to accept students who have trained elsewhere with another Reiki Master.
The Reiki Two course is taught live on line using Zoom.
Testimonials:- What other students who have attended my courses are saying 
Level Two Course
“She explains everything so well and makes it easy to understand and connect to the reiki. This is my 2nd course I’ve done with Margaret” (Louise B).
"Thank you, I thoroughly enjoyed the course." (Beverley S)
This is a very well organized and informative course! (Georgie P)

Margaret Cook - Learn More About Reiki

Energy Healing

Reiki

Reiki Healer

I am a Reiki Teacher in Manchester and one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course. I teach all three levels of Reiki courses, level 1 reiki. level 2 reiki and reiki master level 3

Reiki Level 2 Practitioner Online Course

Are you interested in enrolling on an Online Learning Degree at Arts University Plymouth but curious about how virtually attending an Arts University works?
If so, join us on our Free 3-Session Online Learning Taster Course, an introduction to our January-start degrees. This course has been designed to give you a taste of what it is like to study with us virtually, as well as giving you tailored support for your university application. You will get a virtual art university experience, and a chance to meet some of the lecturers for the subjects you are interested in studying.
You’ll get an insight into how our January-start degrees are taught, how you submit work and how you can develop your skills. This course has been designed to help you feel equipped to commence your studies in January 2025, on one of our January-start degrees.
SCHEDULE
Each of the below sessions will consist of a lecture, workshop or project alongside the chance to ask any questions about making your application..
Registering will include all 3 sessions. You will need to be logged into the course on the following dates and times:
Session 1 - Wednesday 16 October 2024, 3 hrs / 8:45am - 11:45am
Join us for an exciting and engaging workshop led by published children’s book illustrator and author and Arts University Plymouth lecturer, Jack Viant. This interactive session promises to be both fun and educational, featuring hands-on activities and elements designed to keep you fully engaged.

Session 2 - Wednesday 20 November 2024, 3 hrs / 8:45am - 11:45am
Experience a live lecture from Jason Hirons, our Course Leader for Distance Learning. This interactive session will give you a preview of what it's like to be part of our dynamic online distance learning course, engage with course content and ask questions in real time.

Session 3 - Wednesday 18 December 2024, 3 hrs / 8:45am - 11:45am
Enjoy an informative and engaging session led by the Adam Levi, our Senior Learning Technologist and all-round expert in tools for digital education. In this session, you'll gain valuable insights into navigating Canvas, our online learning platform, ensuring you feel confident in managing your coursework, accessing resources, and participating in discussions. You'll also have the opportunity to engage in an interactive workshop designed to enhance your learning experience.
As a student on one of our January-start degrees, you’ll join a truly global community of creative learners. This hybrid degree allows you to complete your first year of studies remotely by July 2025, before taking a short summer break and then continuing straight on to the second year of your chosen degree, studying in-person at our city-centre Plymouth campus, in September 2025. This option is available for the following degrees:
BA (Hons) Commercial Photography
BA (Hons) Fashion Design
BA (Hons) Fashion Media & Marketing
BA (Hons) Graphic Design
BA (Hons) Illustration
BA (Hons) Interior Design & Styling
REQUIREMENTS
To apply you will need to meet the following criteria:

Aged 18-70, at the start of the course
Interested in studying at Arts University Plymouth in January 2025
Want to explore higher education opportunities at an undergraduate level
Planning on studying in the UK on a student visa (if not a UK citizen)
Able to meet Arts University Plymouth Language requirements, more information on this here (International students)
Eligible for at least 3 years of student funding or looking at self-funding a Higher Education course. (More information on if you are eligible can be found at https://www.gov.uk/student-finance/who-qualifies.)
YOUR APPLICATION
Once registered, one of our team will be in touch to discuss your application and have a brief chat about your expectations of the course.
Please note due to high demand, applying for this taster course does not guarantee acceptance. All applications will be reviewed and places will be confirmed before the course start date.
Registering will include all 3 sessions

Register here


Arts University Plymouth

Are you interested in enrolling on an Online (Distance) Learning Degree at Arts University Plymouth, but curious about how virtually attending an Arts University works?

If so, join us online for our Free 3-Session Online Learning Taster Course.

An introduction to our January-start degrees. This course has been designed to give you a taste of what it is like to study with us virtually, as well as giving you tailored support for your university application. You will get a virtual art university experience, and a chance to meet some of the lecturers for the subjects you are interested in studying.

ONLINE LEARNING TASTER COURSE

<p style="color: rgb(13, 13, 13); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(13, 13, 13);"><strong style="color: var(--tw-prose-bold); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: var(--tw-prose-bold);">Course Overview:&nbsp;</strong>Our Level 3 Award in Education and Training (AET) is perfect for those looking to enter the adult teaching industry in the UK and beyond. This course provides a comprehensive understanding of teaching roles, planning inclusive sessions, assessment principles, and creating supportive learning environments. Delivered online or in-class with full tutor support, our course materials are accessible anytime, anywhere, through our student portal.</p>

<p style="color: rgb(13, 13, 13); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(13, 13, 13);"><strong style="color: var(--tw-prose-bold); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: var(--tw-prose-bold);">Sector Covered:&nbsp;</strong>This qualification is highly sought-after across various industries, including healthcare, beauty, education, security, and more. From healthcare professionals to educators and trainers, the Level 3 AET equips individuals with the necessary skills to excel in their respective fields.</p>

<p style="color: rgb(13, 13, 13); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(13, 13, 13);"><strong style="color: var(--tw-prose-bold); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: var(--tw-prose-bold);">Course Outlines:</strong></p>

<ul style="color: rgb(13, 13, 13); box-sizing: border-box;" fr-original-style=" color: rgb(13, 13, 13);">
<li fr-original-style="" style="box-sizing: border-box;">Understanding teacher/trainer roles and responsibilities</li>
<li fr-original-style="" style="box-sizing: border-box;">Building effective relationships in education and training</li>
<li fr-original-style="" style="box-sizing: border-box;">Implementing inclusive teaching approaches</li>
<li fr-original-style="" style="box-sizing: border-box;">Principles of assessment</li>
<li fr-original-style="" style="box-sizing: border-box;">Creating safe and supportive learning environments</li>
<li fr-original-style="" style="box-sizing: border-box;">Motivating learners</li>
<li fr-original-style="" style="box-sizing: border-box;">Planning, delivering, and evaluating teaching sessions</li>
<li fr-original-style="" style="box-sizing: border-box;">Exploring different assessment methods</li>
<li fr-original-style="" style="box-sizing: border-box;">Managing potential problems in teaching</li>
<li fr-original-style="" style="box-sizing: border-box;">Utilizing teaching equipment and aids</li>
<li fr-original-style="" style="box-sizing: border-box;">Practical teaching sessions (Teaching concepts and techniques)</li>
</ul>

<p style="color: rgb(13, 13, 13); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(13, 13, 13);"><strong style="color: var(--tw-prose-bold); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: var(--tw-prose-bold);">Entry Requirement:&nbsp;</strong>Basic functional skills (Numeracy, Literacy, ICT) are required. However, individuals with experience or competence may opt for the distance learning course.</p>

<p style="color: rgb(13, 13, 13); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(13, 13, 13);"><strong style="color: var(--tw-prose-bold); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: var(--tw-prose-bold);">How it Works:&nbsp;</strong>With our self-study method and tutor support, our online or distance learning option provides flexibility. Upon enrollment, you&#39;ll receive all necessary materials and access to the student portal. Complete assignments within 12 weeks, and upon finishing earlier, receive your certificate promptly. A 1-day micro-teach on your chosen topic is required, where you&#39;ll showcase your teaching abilities.</p>

<p style="color: rgb(13, 13, 13); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(13, 13, 13);"><strong style="color: var(--tw-prose-bold); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: var(--tw-prose-bold);">Corporate or Group Booking:&nbsp;</strong>Enjoy special discounts for corporate or group bookings. Our experienced trainers can conduct sessions at your location. Contact us to arrange corporate or group training.</p>

<p style="color: rgb(13, 13, 13); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(13, 13, 13);"><strong style="color: var(--tw-prose-bold); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: var(--tw-prose-bold);">Assessment:&nbsp;</strong>No formal examination is required. Instead, submit a portfolio at the end of the course.</p>

<p style="color: rgb(13, 13, 13); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(13, 13, 13);"><strong style="color: var(--tw-prose-bold); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: var(--tw-prose-bold);">Course Fee:</strong></p>

<ul style="color: rgb(13, 13, 13); box-sizing: border-box;" fr-original-style=" color: rgb(13, 13, 13);">
<li fr-original-style="" style="box-sizing: border-box;">Distance Learning Online: &pound;197.00 (all inclusive)</li>
<li fr-original-style="" style="box-sizing: border-box;">Webinar (Zoom) Live Class: &pound;259.99 (all inclusive)</li>
<li fr-original-style="" style="box-sizing: border-box;">Face-to-Face Class: &pound;279.99 (inside London) / &pound;329.99 (outside London) (all inclusive)</li>
</ul><p style="text-align: center; font-size: var(--font-size); box-sizing: border-box;" fr-original-style="text-align: center;"><a href="https://canarywharfacademy.co.uk/level-3-aet-course/" target="_blank" style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: rgb(255, 255, 255); font-weight: bold; text-decoration: none; border-radius: 5px; background-color: rgb(61, 86, 224); border-width: 12px 18px; border-style: solid; border-color: rgb(61, 86, 224); display: inline-block; user-select: auto; box-sizing: border-box; cursor: pointer;" rel="noopener noreferrer" fr-original-style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: #ffffff; font-weight: bold; text-decoration: none; border-radius: 5px; background-color: #3D56E0; border-top: 12px solid #3D56E0; border-bottom: 12px solid #3D56E0; border-right: 18px solid #3D56E0; border-left: 18px solid #3D56E0; display: inline-block;" fr-original-class="wysiwyg_bold_link_cls">Book Now</a></p>

Course Overview: Our Level 3 Award in Education and Training (AET) is perfect for those looking to enter the adult teaching industry in the UK and beyond. This course provides a comprehensive understanding of teaching roles, planning inclusive sessions, assessment principles, and creating supportive learning environments. Delivered online or in-class with full tutor support, our course materials are accessible anytime, anywhere, through our student portal.
Sector Covered: This qualification is highly sought-after across various industries, including healthcare, beauty, education, security, and more. From healthcare professionals to educators and trainers, the Level 3 AET equips individuals with the necessary skills to excel in their respective fields.
Course Outlines:
Understanding teacher/trainer roles and responsibilities
Building effective relationships in education and training
Implementing inclusive teaching approaches
Principles of assessment
Creating safe and supportive learning environments
Motivating learners
Planning, delivering, and evaluating teaching sessions
Exploring different assessment methods
Managing potential problems in teaching
Utilizing teaching equipment and aids
Practical teaching sessions (Teaching concepts and techniques)
Entry Requirement: Basic functional skills (Numeracy, Literacy, ICT) are required. However, individuals with experience or competence may opt for the distance learning course.
How it Works: With our self-study method and tutor support, our online or distance learning option provides flexibility. Upon enrollment, you'll receive all necessary materials and access to the student portal. Complete assignments within 12 weeks, and upon finishing earlier, receive your certificate promptly. A 1-day micro-teach on your chosen topic is required, where you'll showcase your teaching abilities.
Corporate or Group Booking: Enjoy special discounts for corporate or group bookings. Our experienced trainers can conduct sessions at your location. Contact us to arrange corporate or group training.
Assessment: No formal examination is required. Instead, submit a portfolio at the end of the course.
Course Fee:
Distance Learning Online: £197.00 (all inclusive)
Webinar (Zoom) Live Class: £259.99 (all inclusive)
Face-to-Face Class: £279.99 (inside London) / £329.99 (outside London) (all inclusive)
Book Now

Canary Wharf Academy

Teach The Teacher

Teaching

Higher Level Teaching Assistant (HLTA)

Teaching Online

Teaching & Training

Level 3 Award in Education & Training (AET) Course

Crawley

QNUK Level 3 Award in Mental Health at Work (RQF) - Distance Learning
This course carries 8 UCAS Points 
The QNUK Level 3 Award in Mental Health at Work (RQF) is a comprehensive course designed to equip individuals with the skills and knowledge to promote positive mental health in the workplace. This course is delivered through a flexible distance learning format, allowing participants to complete the training at their own pace from the comfort of their home or office. It also attracts 8 UCAS points, providing added value for learners looking to enhance their professional qualifications and academic progression.

The course covers key concepts in mental health awareness, focusing on recognizing the signs of mental health issues in the workplace, providing initial support, and promoting mental well-being among colleagues. Learners will also explore strategies for reducing stigma, improving workplace culture, and understanding their role in mental health advocacy.

Participants will:
- Gain a thorough understanding of common mental health conditions and their impact on individuals and workplaces.
- Learn how to support colleagues experiencing mental health challenges and provide appropriate first-line responses.
- Develop skills to promote mental well-being and a supportive work environment.
- Understand the legal frameworks and responsibilities relating to mental health at work.

Upon successful completion of the course, learners will receive the QNUK Level 3 Award in Mental Health at Work (RQF) and earn 8 UCAS points. This qualification is invaluable for anyone seeking to enhance their ability to contribute to a mentally healthy workplace.

Self-paced distance learning (typically 8-10 hours of study)

QNUK Level 3 Award in Mental Health at Work (RQF) (valid for 3 years)

This course is suitable for individuals wanting to learn more or managers, supervisors, HR professionals, and any individual looking to support mental health initiatives in their workplace, or those seeking a foundational qualification in workplace mental health.

Comply Sense

Mental Health Awareness

Mental Health First Aid

Accredited Mental Health First Aid

Workplace Health & Safety

Mental Health At Work

This level 3 award training will equip you with all the tools you need to be able to understand, deal with and support people struggling with their wellness and/ or ill mental health. You will also gain 8 UCAS Points by attending this course. 

QNUK Level 3 Award in Mental Health in the Workplace (RQF) 

Learn More Academy Ltd

Level 3 Award in Assessing Competence in the Work Environment Course was known as A1 course. Learn More Academy provides Assessor distance learning or classroom based course in different locations in the UK. Level 3 Assessing Competence in the Work Environment is for practitioners who assess the demonstration of competence in a work environment using the following assessment methods: observation/examining work products/oral questioning and discussion/use of witnesses/learner statements/Recognition of Prior Learning (RPL).

L 3: Assessor Competence Level (TAQA) Course - Online Course / Distance Learning

Deposit

Full Price

Level 3 Supporting Teaching and Learning in Schools Certificate is a RQF qualification & this course play a major role by working with pupils & supporting teachers. This course has been designed to teach the knowledge required to be a teaching assistant and support children’s learning from birth to nineteen years. The course covers various requirements needed to work as an assistant within schools and how to approach a career in the education sector. 

L 3: Teaching Assistant Course - Online Course / Distance Learning


Level 5 Diploma in Education and Training is regulated by Ofqual and prepares trainee teachers to teach in a wide range of contexts, adult qualifications. Level 5: Diploma in Education and Training DET or DTLLS course is a QCF qualification which is full 120 QCF Credit value. Formerly this course used to called Level 5 Diploma in Teaching in the Life Long Learning (DTLLS) course. 

L 5: Diploma in Teaching (DTLLS) Course - Online Course / Distance Learning

<p>Journey back to the Ancient Egyptians who accurately partitioned land along the Nile River, taking us forward to today's modern cities, where skyscrapers touch the sky, all rely on the art of surveying. This "Distance Measurement &amp; Surveying" course allows you to walk in the footsteps of history, breathing life into these ancient skills and employing them in a world where meticulous survey is key to development and progress. Surveying, thus, emerges not just as a profession, but an art form, threading the past, present and the future.</p><p><strong>Learning Outcomes:</strong></p><ul><li>Gain an understanding of the fundamental principles of survey, equipping you with the ability to perform basic area and volume calculations.</li><li>Develop expertise in the usage of various surveying tools and techniques, and learn about different types of surveying instrumentation.</li><li>Understand the processes of levelling, contouring and distance measurement essential to accurate surveying.</li><li>Develop the skills to measure angles and directions and understand the concept of error and uncertainty in survey.</li><li>Learn to prepare comprehensive survey reports, incorporating all aspects of a successful survey.</li><li>Enhance your ability to solve real-world problems relating to distance measurement and surveying.</li></ul><p>Immerse yourself in the rich tapestry of survey that has sculpted the world's most iconic structures and landscapes. This "Distance Measurement &amp; Surveying" course is intricately woven to provide a comprehensive understanding of surveying principles, methods, and equipment. From the foundational aspects of surveying to the technicalities of handling state-of-the-art surveying instruments, each module is meticulously curated to guide learners towards mastering this age-old skill.</p><p>In the era of urbanisation, surveying holds paramount significance, shaping our cities and infrastructures. Thus, this course encapsulates essential facets such as levelling, contouring, and accurate distance measurements. It also delves into angles, directions, error mitigation, and the pivotal role of uncertainty in surveying. The concluding modules entail crafting detailed survey reports, a vital skill in the realm of surveying.</p><p><strong>Certification</strong></p><p>Upon successful completion of the course, all learners will be eligible to receive a certificate titled Surveying Basics to acknowledge their achievement. We are delighted to offer two formats for your certificate: PDF and Hardcopy.</p><p><strong>PDF Certificate</strong>: This digital version of your certificate will be available for you to download and print for totally <strong>FREE</strong>.</p><p><strong>Hard Copy Certificate</strong>: For those who wish to have a physical token of their achievement, we offer a high-quality, printed certificate. This hardcopy certificate is also provided free of charge. However, please note that delivery fees apply.</p><p><strong>UK Delivery</strong>: If your shipping address is within the United Kingdom, the delivery fee will be only <strong>£3.99.</strong></p><p><strong>International Delivery</strong>: For all international addresses outside of the United Kingdom, the delivery fee will be only <strong>£10</strong>.</p><h2>
        
        <div>CPD</div>
    </h2>

                        <div id="cpd">
                            <div>
                                <div>
                                    <div>
                                        10 CPD hours / points
                                    </div>
                                        <div>
                                            Accredited by CPD Quality Standards
                                        </div>
                                </div>
                            </div>
                        </div><h2>
        
        <div>Who is this course for?</div>
    </h2>

                        <div id="who_is_this_course_for">
                            <ul><li>University students studying civil engineering or geography looking to delve into survey.</li><li>Architects want to deepen their understanding of space and structural planning through surveying.</li><li>Builders and construction site managers interested in enhancing their knowledge of surveying for improved site planning.</li><li>Landscapers aim to use surveying to optimise the usage of available land and resources.</li><li>Environmentalists or conservationists who require survey skills to study and protect natural habitats.</li><li>Anyone with a keen interest in survey and a desire to understand its relevance and applications in contemporary society.</li></ul>
                        </div><h2>
        
        <div>Career path</div>
    </h2>

                        <div id="career_path">
                            <ul><li>Land Surveyor: (£30,000 - £45,000)</li><li>Quantity Surveyor: (£35,000 - £50,000)</li><li>Geodetic Surveyor: (£30,000 - £45,000)</li><li>Photogrammetrist: (£28,000 - £42,000)</li><li>Hydrographic Surveyor: (£25,000 - £40,000)</li><li>Cartographer: (£23,000 - £37,000)</li></ul>
                        </div><h2>
        
        <div>Certificates</div>
    </h2>

                        <div id="optional_extras">
                                    <h4>Digital certificate</h4>
        <p>
            Digital certificate -
            Included
        </p>
        <h4>Hard copy certificate</h4>
        <p>
            Hard copy certificate -
            Included
        </p>
            <div> <p><strong>Hardcopy Certificate (UK Delivery):</strong></p><p>For those who wish to have a physical token of their achievement, we offer a high-quality, printed certificate. This hardcopy certificate is also provided free of charge. However, please note that delivery fees apply. If your shipping address is within the United Kingdom, the delivery fee will be only <strong>£3.99</strong>.</p><p><strong>Hardcopy Certificate (International Delivery): </strong></p><p>For all international addresses outside of the United Kingdom, the delivery fee for a hardcopy certificate will be only <strong>£10</strong>.</p> </div>

                        </div>

Training Express

Distance Measurement & Surveying Course

<h2>AAT Distance Learning</h2>
<ul>
<li>AAT Distance Learning simply allows you to study at a time and place to suit you, whether that be at home or at work. We understand that it can sometimes be difficult to get to a centre, for various reasons. That's why distance learning offers you the perfect way to fit your studies around your daily commitments, instead of the other way round, which is often the case.</li>
<li>Our friendly course advisers will supply you with all of the learning materials such as course books, workbooks and software required to get you started. Moreover, you would get access to our State of the art VLC (Virtual Learning Campus), where you would be able to access ample study resources to support your studies.</li>
<li>Moreover, with AAT home study, from time to time you can contact your personal tutor by email or by phone if you have any issue .</li>
<li>For AAT distance learning courses courses we deliver the study books to your home address.</li>
</ul>
<p>In summary, AAT Distance Learning courses are self study method with tutorial support and you do not have to join any lecture sessions as you study according to your own pace.</p><section>
                    <h3>AAT Level 2 Distance learning course covers</h3>
<p>Coursebooks and workbooks delivered to your home address. Access to VLC or online student portal for additional aat study materials. Sage 50 Accounts software included in the study package. 4 computer based tests and 1 final Synoptic assessment.</p>
<h3>AAT Level 3 Distance learning course covers</h3>
<p>No of Coursebooks and workbooks delivered to your home address. Access to VLC(Virtual Learning Campus) or online student portal for additional aat study materials. 4 computer based tests and 1 final Synoptic assessment at an approved AAT Exam Centre.</p>
<h3>AAT Level 4 Distance learning course covers</h3>
<p>Coursebooks and workbooks for chosen subjects delivered to your home address. Access to VLC(Virtual Learning Campus) or online student portal for additional aat study materials. 5 computer based tests and 1 final Synoptic assessment at an approved AAT Assessment venue.</p>


                </section>

39 Courses in Edinburgh

Transmission demystified

By Systems & Network Training

LINX 2

By Systems & Network Training

Definitive IP routing for engineers

By Systems & Network Training

Network +

By Systems & Network Training

Leading Cross-Cultural Virtual Teams: In-House Training

By IIL Europe Ltd

Virtual Agile Teams: In-House Training

By IIL Europe Ltd

LINX 1

By Systems & Network Training

TCP/IP foundation for engineers

By Systems & Network Training

Network fundamentals for engineers

By Systems & Network Training

Networks demystified

By Systems & Network Training

Search By Location