Name: Exploration & Production (E&P) Accounting Level 1
Price: 2339 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will provide a comprehensive understanding of the design of circulating fluidized bed (CFB) boilers. The design of all CFB boiler components and equipment including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves will be covered in detail. All potential operating problems and major operating problems, corrective actions and maintenance required for CFB boilers will be covered thoroughly.</p>
<p>This course will focus on designing CFB boilers that have the highest efficiency, and maximum longevity and capacity factor. All the common problems encountered in CFB Boilers will be discussed in detail.This includes thermally induced failures, anchor system induced failures, water walls tube failures, NMEJ damages, clinker formation, refractory damages, APH tube chock-up, erosion and corrosion. The solutions to each of these problems will be presented. All repair and refurbishment methods, preventive and predictive maintenance required for CFB boilers will be covered in-depth.</p>
<p>Several studies have confirmed that CFB boilers are the best method for power generation.This is due to their fuel flexibility, and lowest electricity cost among all types of boilers. This technology is in great demand due to various other advantages such as lower emissions as compared to other types of boilers and has a carbon footprint well below the norms laid down by the World Bank emission requirements.</p>
<p>This course is a MUST for anyone who is involved in the design, operation or maintenance of circulating fluidized bed boilers, because it covers how these boilers are designed and provides guidelines and rules that ensure the CFB boilers have great performance. This course will also provide up-dated information in respect to the design of supercritical once-through CFB boilers and ultra supercritical CFB boilers.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><span><strong>Circulating Fluidized Bed Boiler Design:</strong> </span><span>Gain a thorough understanding of the best design methods of circulating fluidized bed boilers.</span></li>
<li><span><strong>Design of Circulating Fluidized Bed Boiler:</strong> Components and Systems</span><span>: Learn</span> <span>all the techniques used to design CFB boiler equipment and systems including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves.</span></li>
<li><strong><span>Design of Circulating Fluidized Bed Boiler to Achieve Highest Efficiency, and Best Performance and Economics</span></strong><span><strong>:</strong> Gain a thorough understanding of all the methods used to design CFB boilers having the highest efficiency, longevity and capacity factor as well as best economics.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Equipment:</span></strong><span> Learn about various equipment of circulating fluidized bed boilers including: furnaces, cyclones, economizers, superheaters, reheaters, ammonia injection systems, electrostatic precipitators, polishing dry scrubbers, fuel and sorbent feeding systems, bottom ash handling and extraction systems and materials.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Environmental Emissions:</span></strong><span> Learn about the monitoring and control of environmental emissions from circulating fluidized boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation and control systems of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Reliability and Testing:</span></strong><span> Increase your knowledge of predictive and preventive maintenance, reliability and testing of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Selection and Applications: </span></strong><span>Gain a detailed understanding of the selection considerations and applications of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Maintenance:</span></strong><span> Learn all the maintenance activities required for circulating fluidized bed boilers, to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Refurbishment, and Life Extension Methods: </span></strong><span>Learn about life cycle cost, profitability, refurbishment, and life extension methods for all types of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Commissioning: </span></strong><span>Understand all the commissioning requirements of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Codes and Standards: </span></strong><span>Learn all the codes and standards applicable for circulating fluidized bed boilers.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Design of Circulating Fluidized Bed Boiler manual (600 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Design Of Circulating Fluidized Bed Boilers

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans. This course provides also a comprehensive explanation of all boiler combustion control systems including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system as well as their tuning methods. All boiler control systems are covered as well in this course including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, boiler-turbine coordinated control, etc.</p>
<p>The course provides also detailed explanation of Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code). The burner management systems (BMS) and examples of boiler permissive starting logic and protective tripping logic will be explained thoroughly. The various methods used to calculate the boiler efficiency are covered in detail in this course including the direct and indirect methods. All the factors which affect the efficiency and emissions of pulverized coal boiler and CFB boiler will be explained thoroughly.</p>
<p>The course covers also all the methods used to improve the efficiency of pulverized coal boilers and CFB boilers including improvement to their combustion efficiency and control systems performance.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Boiler Combustion Equipment and Systems:</span></strong><span> Gain an in-depth understanding of all boiler combustion equipment and systems including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans</span></li>
<li><strong><span>Boiler Combustion Control Systems:</span></strong><span> Gain a thorough understanding of all boiler combustion control systems for pulverized coal boilers, and CFB boilers including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system</span></li>
<li><strong><span>Boiler Conventional Control Systems:</span></strong><span> Gain an in-depth understanding of all boiler conventional control systems including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, and boiler-turbine coordinated control</span></li>
<li><strong><span>Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code):</span></strong><span> Learn about NFPA 85 code and ANSI/ISA-77-44-01-2007 code</span></li>
<li><strong><span>Burner Management System and Boiler Permissive Starting Logic and Protective Tripping Logic:</span></strong><span> Gain an in-depth understanding of burner management system and boiler permissive starting logic and protective tripping logic</span></li>
<li><strong><span>Boiler Efficiency Calculations:</span><span> Learn how to calculate the boiler efficiency using the direct and indirect methods</span></strong></li>
<li><strong><span>Factors Affecting the Efficiency and Emissions of Boilers: </span></strong><span>Understand all the factors which affect the boiler efficiency and emissions</span></li>
<li><strong><span>Methods Used to Improve the Efficiency of Boilers:</span></strong><span> Learn about all the methods used to improve the efficiency of pulverized coal boilers, and CFB boilers including improvement to their combustion efficiency and control systems performance</span></li>
<li><strong><span>Boiler Instrument and Piping Diagrams:</span></strong><span> Gain an in-depth understanding of all boiler instrument and piping diagrams</span></li>
<li><strong><span>CFB and Pulverized Coal Boilers Equipment and Systems:</span></strong><span> Learn about various types of equipment and systems used in CFB and pulverized coal boilers including economizers, steam drum, superheaters, air preheaters, ammonia injection systems, etc.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>COMBUSTION ENGINEERING FOR COAL FIRED POWER PLANTS MANUAL (includes practical information about combustion engineering for coal fired power plants - 550 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Combustion Engineering for Coal Fired Power Plants

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Identifying and correcting the root cause of failures in boilers and steam power plant equipment is essential to help reduce the chance of future problems. A comprehensive assessment is the most effective method of determining the root cause of a failure. For example, a tube failure in a boiler is usually a symptom of other problems. To fully understand the root cause of the failure, one must investigate all aspects of boiler operation leading to the failure in addition to evaluating the failure itself. When a boiler tube failure occurs, the root cause of the failure must be identified and eliminated.</p>
<p>This 5 full-day course starts by providing an in-depth understanding of root cause analysis methodology. This includes how to identify the problem, contain and analyze the problem, define the root cause of the problem, define and implement the actions required to eliminate the root cause, and validate that the corrective actions prevented recurrence of the problem. Many practical examples on how to apply root cause analysis for various industrial problems are discussed in detail.</p>
<p>The course then provides an in-depth explanation of all failure mechanisms that occur in steam power plants including corrosion, erosion, creep, cavitation, under-deposit attacks, stress corrosion cracking, hydrogen embrittlement, flow accelerated corrosion, etc. This course also provides a thorough explanation of all the failure mechanisms that occur in boilers and steam power plant equipment including steam turbines, condensers, feedwater heaters, etc. The symptoms of the failures, possible causes, components typically affected and solutions are also provided in this course. This includes boiler waterside, fireside and general boiler failure mechanisms as well as all the causes and prevention of all steam turbine failures, condensers, and feedwater heaters. The course also includes detailed study of many case histories of failures in boilers, steam turbines, condensers and feedwater heaters.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Electrical Equipment Testing and Maintenance: </span></strong><span>Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</span></li>
<li><strong><span>Root Cause Analysis Methodology:</span></strong><span> Understand root cause analysis methodology including: identification of the problem, defining the problem, understanding the problem, identification of the root cause of the problem, providing corrective action, and monitoring the system.</span></li>
<li><strong><span>Applying the Root Cause Analysis Method to Industrial Problems:</span></strong><span> Learn by studying many practical examples how to apply the root cause analysis method to various industrial problems.</span></li>
<li><strong><span>Damage Mechanisms in Boilers and Steam Power Plant Equipment: </span></strong><span>Gain a thorough understanding of all the damage mechanisms that occur in boilers and all steam power plant equipment including turbines, condensers and feedwater heaters. These mechanisms include corrosion, erosion, flow accelerated corrosion, stress corrosion cracking, creep, under-deposit attack, cavitation, hydrogen embrittlement, etc.</span></li>
<li><strong><span>Symptoms of Failures in Boilers and Steam Power Plant Equipment, Possible Causes, Components Typically Affected, and Solutions:</span></strong><span> Learn about all the symptoms of failures in boilers and steam power plant equipment including steam turbines, condensers, and feedwater heaters, their possible causes, components typically affected and proven solutions.</span></li>
<li><strong><span>Case Histories of Failures in Boilers, Steam Turbines, Condensers, and Feedwater Heaters:</span></strong><span> Learn by studying many case histories how failures occur in boilers, steam turbines, condensers, and feedwater heaters and the corrective actions taken to deal with them</span></li>
</ul>
<p> </p>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals (this seminar is suitable for individuals who do not have an electrical background)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2011 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>ROOT CAUSE ANALYSIS FOR BOILERS AND STEAM CYCLE FAILURES MANUAL (includes practical information and case histories - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Root Cause Analysis for Boilers and Steam Cycle Failures

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of circulating fluidized bed (CFB) boiler coal power plants. The Commissioning Management System of CFB boiler coal power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report.</p>
<p>The course provides also a thorough understanding of all the commissioning requirements for CFB boiler and auxiliaries, turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear, and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a coal power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of CFB boiler coal power plant systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports.</p>
<p>This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any CFB boiler coal power plant equipment because it provides detailed pre-commissioning checks and detailed tests and commissioning procedures and instructions for every component in a CFB boiler coal power plant.</p>
<p>In addition, the course provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each CFB boiler coal power plant equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in CFB Boiler Coal Power Plants:</span></strong><span> Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in CFB boiler coal power plants</span></li>
<li><strong><span>Commissioning Management System of CFB Boiler Coal Power Plants:</span></strong><span> Discover the benefits of the Commissioning Management System of CFB boiler coal power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report</span></li>
<li><strong><span>Commissioning Procedures and Instructions for CFB Boiler and Auxiliaries in Coal Power Plants:</span></strong><span> Learn about the commissioning procedures and instructions for CFB boiler and auxiliaries including all commissioning activities, typical commissioning schedule, hydraulic test and wet preservation, air and gas tightness test, trial run of equipment, electronic precipitators, fuel oil system, preparation for first light up, alkali boil - out, acid cleaning and passivation, thermal flow test of economizer, water walls, and superheater, valves, steam boiling, and safety valve setting</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Turbine and Auxiliaries:</span></strong><span> Gain a thorough understanding of all the commissioning procedures and instructions for turbine and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Generator and Auxiliaries:</span></strong><span> Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Electrical Equipment: </span></strong><span>Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers, and motors</span></li>
<li><strong><span>CFB Boiler Coal Power Plant Equipment and Systems:</span></strong><span> Learn about various CFB boiler coal power plant equipment and systems including: CFB boilers, superheaters, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>CFB BOILER COAL POWER PLANT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component and system in CFB boiler coal power plants - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Commissioning and Start-Up Activities of Coal Power Plants

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course will focus on geological fundamentals: how different basin types differ in subsidence mechanisms, basin cycles, heat flow through time, depositional systems, structural styles and their type of petroleum systems. This will allow participants to make realistic interpretations in new areas; interpretations that are consistent with the specific basin type and to be expected depositional systems and structural styles. </p>
<p>In addition, through simple paper-based exercises, the course will provide background and understanding of how some of the typical PBE products are made: creaming curves, Field-size plots and Yet-to-find. Finally, the essentials of commercial assessments will be covered.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li>To provide participants with a sound understanding how, and under which conditions different basin types develop, and what the impact of their development is on the typical petroleum systems of these different basin types.</li>
<li>To teach evaluation techniques that assist in the regional understanding and illustration of sedimentary basins and their development. While some of these techniques can be done using computers, in the course these will be done 'by hand' for maximum understanding.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is designed in the first place for <strong>geoscientists working in exploration and their direct supervisors</strong>. The course is also very instructive for specialist staff working closely with exploration staff such as (bio)stratigraphers, geochemists, basin modelers, structural geologists, geophysicists, reservoir engineers and petrophysicists.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Each topic is introduced by a lecture, and leaning is re-enforced by practical exercises (on paper). There is ample time for discussions of general issues and any specific questions participants may have. For several exercises participants will be invited to do exercises on a basin of their choice, which will make the course more impactful for the participants.</p>
<p>Participants will be provided with the following pre-read material:</p>
<ul>
<li><strong>Concepts of Conventional Petroleum Systems</strong>. <em>De Jager, J</em>. (<strong>2020</strong>). Invited contribution for Regional Geology and Tectonics Volume 1: Global Concepts, Techniques and Methodology (eds: Adam, J., Chiarelly, D. &amp; Scarselli, N.</li>
<li><strong>Play-Based </strong><strong>Exploration of the petroleum potential of the </strong><strong>Tremp-Graus, Ainsa and eastern Jaca Sub-basins in the southern</strong><em> De Jager, J &amp; van Winden, M</em>. <strong>(2020</strong>). invited contribution for Digital Learning - Multi-scale analysis of depositional systems and their subsurface workflows (eds: GrÃ¶tsch, J. &amp; PÃ¶ppelreiter, M.), EAGE.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has a PhD in Geology from the University of Utrecht. He worked for 31 years (1979 -2010) with Shell as an exploration geologist in a variety of functions across the globe. As Principle Technical Expert, he was responsible for ensuring that Risk &amp; Volume assessments were carried out consistently and correctly in all of Shell's exploration units.</p>
<p>In this capacity, he led and participated in countless prospect review sessions and developed and conducted a successful in-house course on Risks &amp; Volume assessment. As manager of the Exploration Excellence Team, he performed in depth analysis of basins and plays and provided advice on exploration opportunities to senior management. Together with his team, he visited most of Shell's exploration offices, working hands-on with Shell's local exploration teams to generate new play and prospect ideas and to suggest evaluation techniques and technologies to apply.</p>
<p>In 2010, he was appointed as extraordinary professor Regional and Petroleum Geology at the VU university of Amsterdam and in 2012 also at the University of Utrecht. He was visiting professor at the University of Malaya (Malaysia).</p>
<p>Through his own consultancy, as of 2010, he provides advice on exploration activities to several companies and is regularly invited to carry out technical reviews. Activities cover all continents and include Portfolio Reviews, Prospect assessment, Play-based Exploration, and Geothermal activities.</p>
<p>He conducts courses on several topics including Risk &amp; Volume Assessment, Prospect Maturation, Basin Analysis, Play-based Exploration, Trap &amp; Seal Analysis, Petroleum Geology for Non-geologists.</p>
<p>Some of his recent publications include:</p>
<ul>
<li>De Jager, J. &amp; van Winden, M. (2020): Play-Based Exploration of the petroleum potential of the Tremp-Graus, AÃ­nsa and eastern Jaca Sub-basins in the southern Pyrenees. Invited contribution for Digital Geology, EAGE special publication (eds: GrÃ¶tsch, J. &amp; PÃ¶ppelreiter, M.)</li>
<li>De Jager, J. (2020). Concepts of Conventional Petroleum Systems. Invited contribution for Regional Geology and Tectonics Volume 1: Global Concepts, Techniques and Methodology (eds: Adam, J., Chiarelly, D. &amp; Scarselli, N.)</li>
<li>De Jager, J. (2021): Handbook Risk &amp; Volume Assessment. Self-published</li>
<li>De Jager, J., Van Ojik, K &amp; Smit, R. (2023 - in preparation): Geological Development of The Netherlands. In: Geology of The Netherlands (eds: Ten Veen, J., Vis, G-J., De Jager, J. @ Wong, T.)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Basin Analysis and Petroleum Systems

Redhill

<h3><b>MySQL server admins training course description</b></h3>
        <p>This MySQL Server administration course is designed
for MySQL Server administrators who have a basic
understanding of a MySQL database and a good
working knowledge of SQL commands.
The course provides an understanding of MySQL
Architecture and practical experience in setting up,
configuring and maintaining a MySQL server, backing
up and recovering data and optimising query
performance. This MySQL Server administration course
also covers MySQL replication and its role in high
availability and scalability.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
                        <li>Use MySQL Workbench.</li>
 <li>Install and configure a MySQL Server .</li>
 <li>Administer and tune a MySQL server.</li>
 <li>Configure log files and interpret error messages..</li>
 <li>Secure the Server.</li>
 <li>Administer a replication topology.</li>
                  </ul>
        <h5>
        <b>MySQL server admin training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Database administrators, Database developers and
Technical consultants.</p>
              
							<li><b>Prerequisites:</b></li>
							
							<p>Introduction to MySQL</p>
              
							<li><b>Duration</b></li>
							
              <p>5 days</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>MySQL server admin training course contents</b></h3>
      <ul>
        <li>Introduction to Oracle Application Express </li><p>
APEX concepts APEX main components Workspaces, database applications and websheet applications Creating a workspace The Workspace Administrator Upgrading APEX Logging into APEX Running an application

</p><li>SWL Workshop </li><p>
Use APEX to browse, create and modify objects Process ad hoc SQL statements Manage scripts in APEX Create, run and save SQL queries

</p><li>Build a database application </li><p>
Application components Create an application Create an application from a spreadsheet

</p><li>Create reports </li><p>
Create reports using wizards Edit report attributes Add links to reports Create a link to a printer-friendly version of a report Save and print reports in different formats

</p><li>Using files </li><p>
Uploading images Creating cascading stylesheet files Uploading static files Adding an Image as an application logo Adding a reference to a Javascript file

</p><li>Pages and regions </li><p>
Web form behaviour in APEX Create a form based on a table Create a form based on a procedure Create a form with a report Create a tabular form Format a form Locking in APEX forms

</p><li>Creating lists of values </li><p>
Overview of application express shared Components Dynamic and static lists of values Create a dynamic list of values Create a static list of values Use a list of values to control data in a report Create a cascading list of values

</p><li>Items and buttons </li><p>
Understand the different Types of items Create items Understand and edit item attributes Use Javascript with item Manipulate items in tabular forms Add dynamic items to a report Create and edit buttons

</p><li>Page Processing </li><p>
Page rendering and page processing Create computations Validate input data Process Data Understand application branching Create conditional branches

</p><li>Shared components </li><p>
Overview of application express navigation components Manage parent and standard tabs Create navigation bar entries Create and use lists and list items Manage breadcrumbs Create shortcuts Shared component subscription User interface defaults

</p><li>Display dynamic content </li><p>
Filter reports with dynamic queries Create charts with a wizard Format charts Create calendars Add links to calendars Create hierarchical trees

</p><li>State and debugging </li><p>
Understand session state Set a session state value Clear the session state Review the session state Review the messages in debug mode Enabling feedback Managing feedback and team development

</p><li>Themes and templates </li><p>
Switch to a different theme View existing templates Understand and manage templates Create a new template Add references to cascading stylesheet and Javascript files

</p><li>Dynamic actions and plug-in components </li><p>
Identify plug-in components and their types Plug In a component Create dynamic actions Use a plug-in in a dynamic action

</p><li>Building website applications </li><p>
Websheet applications and their components Create a websheet application Enable SQL and PL/SQL in a websheet application Add sections and pages to a websheet application Add links on a websheet page Add a data grid to a websheet application Create SQL reports ion websheet applications Add annotations to a websheet application

</p><li>Implementing security </li><p>
Authentication and authorization Provide an authentication scheme Create an authorization scheme using access control Enable and configure session state protection

</p><li>Deploy an appliction </li><p>
Define supporting objects Package an application Export an application Import an application Install supporting objects

</p><li>Administer Apex workspaces </li><p>
Manage workspaces and users Request a schema or storage Purge session state Monitor developer activity log Monitor workspace activity View activity reports Import a workspace

</p><li>Utility programs </li><p>
Import and export data Generate DDL statements View objects reports</p>
      </ul>

Systems & Network Training

Network & Security

Network Engineer

MySQL server administration

General Admission

Musselburgh

<h2 fr-original-style="" style="box-sizing: border-box;">The 2-day Indian Head Massage course will cover</h2><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This Indian Head Massage training course is very practical and no previous experience in massage is required. </p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">During the 2-day training course, I demonstrate the massage movements. After that, you will then get to practice with other students in the group. I break the learning down into small bite-size chunks before pulling it all together on the afternoon of the second day of training. I also focus on how to take care of yourself and how important it is to do this, particularly from a posture perspective so that you don&#39;t injure yourself.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">You also receive the relaxing Indian Head Massage treatment from the other students in the group. A full treatment is massaging the head, neck, shoulders, back, and upper arms and finishing on the face with the client fully clothed and sitting on a chair.</p><h2 fr-original-style="" style="box-sizing: border-box;">After the 2-day Indian Head Massage Training</h2><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">In addition to attending the 2-day training, you will&nbsp;complete 10 case studies at home.&nbsp;You need to do at least&nbsp;two Indian head massage treatments for each client. After that, you will return approximately 8-<wbr fr-original-style="" style="box-sizing: border-box;">10 weeks later to carry out a practical exam. This requires you to do an Indian Head massage treatment on a client without referring to any notes. Carrying out case studies and returning to do a practical exam, builds up your confidence so that you can then feel confident in charging clients for your Indian Head Massage treatment.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The course has&nbsp;been accredited by the CMA (Complementary Medical Association).&nbsp;Upon successful completion, students receive a CMA (Complementary Medical Association) Certificate in Indian Head Massage.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Indian Head Massage treatments are popular at Staff Wellbeing days, Women groups, Charity events, and also at pampering parties as there is no need to bring a therapy couch. It is a popular treatment as the client remains seated and clothed. It can also be shortened to 20- 30 minutes which I provide details of as well as the 1-hour treatment.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Geraldine McCullagh has 25+ years of experience as a Complementary Therapist and also a Complementary Therapist Trainer.</p>

The 2-day Indian Head Massage course will cover
This Indian Head Massage training course is very practical and no previous experience in massage is required. 
During the 2-day training course, I demonstrate the massage movements. After that, you will then get to practice with other students in the group. I break the learning down into small bite-size chunks before pulling it all together on the afternoon of the second day of training. I also focus on how to take care of yourself and how important it is to do this, particularly from a posture perspective so that you don't injure yourself.
You also receive the relaxing Indian Head Massage treatment from the other students in the group. A full treatment is massaging the head, neck, shoulders, back, and upper arms and finishing on the face with the client fully clothed and sitting on a chair.
After the 2-day Indian Head Massage Training
In addition to attending the 2-day training, you will complete 10 case studies at home. You need to do at least two Indian head massage treatments for each client. After that, you will return approximately 8-10 weeks later to carry out a practical exam. This requires you to do an Indian Head massage treatment on a client without referring to any notes. Carrying out case studies and returning to do a practical exam, builds up your confidence so that you can then feel confident in charging clients for your Indian Head Massage treatment.
The course has been accredited by the CMA (Complementary Medical Association). Upon successful completion, students receive a CMA (Complementary Medical Association) Certificate in Indian Head Massage.
Indian Head Massage treatments are popular at Staff Wellbeing days, Women groups, Charity events, and also at pampering parties as there is no need to bring a therapy couch. It is a popular treatment as the client remains seated and clothed. It can also be shortened to 20- 30 minutes which I provide details of as well as the 1-hour treatment.
Geraldine McCullagh has 25+ years of experience as a Complementary Therapist and also a Complementary Therapist Trainer.

ms geraldine mccullagh

Massage Therapy

Facial Massage

Complementary Therapy

Beauty Therapist

Indian Head Massage

2-day Certificate in Indian Head Massage near Edinburgh. This Indian Head Massage training course is very practical and no previous experience in massage is required.

2 Day Certificate in Indian Head Massage Course(7th&8th Sept) 

General admission

Birmingham

Telford

LaPD Solutions is passionate about the skills required to transfer Skills, Knowledge and Understanding (SKU) to others.
We believe that trainers should not lecture their learners but instead use our tools to engage, interest, and even challenge them, making them inquisitive about the learning and able to reason out the new SKU to keep their brains engaged.
Our three to five-day course compares the lecture-based delivery that most trainers use to deliver their training to our Engagement Methodology and explains why it is significantly better for learning and retention.
We use the same session structure in our methodology to deliver these courses. Our CET structure is not rigid but rather adaptable to the dynamic situations trainers often find themselves in, especially when time is tight. This flexibility empowers trainers to deliver effective training regardless of the circumstances.
We discuss why question techniques are an incredibly powerful tool in the art of engaging our learners, and we look at when we should use specific techniques and even when we should not. We give time to practice this key skill, but please note that the three-day course has limited time for this crucial practice. The three-day version of this course is designed exclusively for experienced trainers, recognising their expertise and the experience they have acquired. Including inexperienced trainers is unfair to them or others on their course.
A comprehensive course manual (100+ pages) is supplied and used throughout the course to ensure attendees can find their way around and ask questions as they wish.




LENGTH - Two, three or five days, depending on experience and roles. But please contact us to discuss your specific needs so we can offer our advice.  
NEXT WORKSHOP START - Please ask for more information as we deliver bespoke closed events for your people at your location or a mutually suitable location.
WORKSHOP DELIVERY - The best environment for this workshop is face-to-face, but we can facilitate this workshop online.



Suitability - Who should attend?
Who? - ANYONE involved in transferring Skills, Knowledge and Understanding (SKU)
People who are brand new into training - 5 days.
People who will be taking up a training role soon - 5 days.
Experienced trainers and facilitators (ideally two years) who want to adapt their current delivery style to our interactive and engagement methodology - 3 days.
People whose primary role is not training but will deliver training occasionally - 2 days.
Why? If you want your trainers to deliver engaging training that helps their attendees learn and retain new skills, knowledge, and understanding (SKU), then ensure they have been given the proper training to do just that.
Show your clients that you have invested in your trainers by ensuring they are all certified to deliver training and that their delivery is monitored and assessed to maintain those standards.
If you expect high standards of training in your organisation and given to your clients, then ensure you have the tools to do that and the ability for your senior trainers to assess their peers to ensure the consistency of quality, the monitoring of standards and the continuous development of all your trainers and facilitators.
Training Course Content
What is a Sat-Nav trainer, and why must we avoid this at all costs?
We discuss our recommended session structure and why it is designed that way.
We examine different question techniques and discuss what each is good for or why it should be avoided.
We look at our Task Based Objectives (TBOs) and discuss various reasons why they should be adopted.
We touch on learning styles to see what you think of each and how we can cater to them.
We take a good look at our SAS feedback model and why we think it must be facilitated and not given.
We help you plan and prepare for your final session for the last day using our Script Writing Guide.
We discuss why Emotional Intelligence is a must-have in your trainer's toolbox.
Attendees deliver their final mini sessions. We record them (HD). We offer one-on-one feedback. We chat as a group.
Course delivery and venue
When you consider the content we deliver, we are sure you will understand why we always prefer to deliver our workshops, courses and programmes face-to-face.
Face-to-face workshops and courses can be held at a location of your choice or, if you wish, a central UK location, such as the Macdonald Burlington Hotel in Birmingham, located directly across from the Birmingham New Street train station.
We can deliver our workshops, courses and programmes online, although this will mean splitting elements into manageable learning events to suit the online environment.
The three-day course is split into two parts. The first two days are together, then the third day a week (or more) later. This gives attendees time to plan, prepare and practice before delivering their final recorded sessions.
The five-day course is not required to be split as practice time is built into the 4th day. However, if it suits organisations better, we can accommodate a split between the fourth and fifth days.

Lapd Solutions Ltd

Coaching Skills

Facilitation Skills

Certificate in Education & Training (CET)

Teacher Training

Train the Trainer (TTT)

Trainer

Train The Trainer

Introductory daily rate.

Registered charities and non profits only. 

Non profits only. 

<h3><b>Asterisk training course description</b></h3>
      <p>This 3 day hands on Asterisk training course covers all the ground for you to get an Asterisk PBX installed and configured. After installation the course progresses from a simple first configuration onto VoIP and PSTN integration along with the provision of PBX features such as ACD and IVR. Practical sessions follow each major section to reinforce the theory. </p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
          <li>Install and configure Asterisk.</li>
              <li>Connect Asterisk to the Internet and PSTN.</li>
              <li>Integrate VoIP and the PSTN.</li>
              <li>Configure Asterisk for PBX features such as voicemail, ACD and IVR.</li>
      </ul>
       
        <h5>
        <b>Asterisk training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Technical staff working with or evaluating Asterisk. </p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>None although hands on experience of UNIX systems would be beneficial, as would knowledge of VoIP.</p>
              
							<li><b>Duration</b></li>
							
              <p>3 days
						</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Asterisk training course contents</b></h3>
      <ul>
				<li>What is Asterisk?</li><p>
PBXs, what Asterisk does, Asterisk features,
Asterisk VoIP support, Asterisk and the Internet,
Asterisk and the PSTN, hosted VoIP systems.
</p><li>Asterisk installation</li><p>
Linux installation, Asterisk package compilation
and installation. Timing sources. <br /><span>Hands on</span>
Installing Asterisk
</p><li>Managing Asterisk</li><p>
Starting/stopping Asterisk, command arguments,
Asterisk commands, log files, logger.conf, remote
management. <br /><span>Hands on</span> Controlling Asterisk.
</p><li>First Asterisk configuration</li><p>
The role of SIP, IP phones, DHCP, IP
addressing, sip.conf, extensions.conf. <br /><span>Hands on</span>
Simple SIP configuration
</p><li>Asterisk architecture</li><p>
Server hardware, interfaces, channels, Zaptel,
Digium, Asterisk filesystem, connections. The
configuration files, syntax, asterisk.conf. <br /><span>Hands on</span> Adding hardware for Asterisk, exploring the
configuration files.
</p><li>DAHDI configuration</li><p>
Digium hardware, DAHDI architecture, DAHDI
installation, DAHDI configuration, system.conf,
FXS, FXO, E1, chan_dahdi.conf, dahdi_cfg,
DAHDI tools. <br /><span>Hands on</span> Connecting Asterisk to
the PSTN.
</p><li>Dial plans</li><p>
extensions.conf detail, contexts, priorities. <br /><span>Hands on</span> Configuring dial plans.
</p><li>SIP configuration</li><p>
sip.conf in detail, defining SIP channels, incoming
SIP channels, outgoing SIP channels, SIP
variables, Asterisk as a SIP client and SIP server.
<br /><span>Hands on</span> SIP configuration.
</p><li>IAX configuration</li><p>
What is IAX, IAX server, IAX client, IAX
channels, iax.conf, IAX syntax in
extensions.conf, IAX trunking. <br /><span>Hands on</span> Linking
Asterisk systems.
</p><li>Implementing PBX functions</li><p>
Voicemail, voicemail trees, voicemail passwords,
Music on hold, meetme conferencing, call
parking. ACD, IVR, fax. <br /><span>Hands on</span> Configuring
PBX features. 

</p>
      </ul>

Definitive Asterisk for engineers

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>This 3-day introductory-level course provides a comprehensive overview of international accounting and finance practices in the E&amp;P industry. It is particularly suitable for finance personnel who are new to the oil and gas industry, or want to gain a broader understanding of oil and gas financial policy, joint venture and cost-control topic areas.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>After the completion of this training course, participants will be able to:</p>
<ul>
<li>Comprehend an overview of accounting policies and practices in the oil and gas industry</li>
<li>Manage project development and operating costs</li>
<li>Understand the accounting and financial management implications of exploring for and producing oil and gas</li>
<li>Review the background to financial issues like joint ventures that are unique to the E&amp;P industry, and their accounting treatment</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This training course is suitable and will greatly benefit the following specific groups:</p>
<ul>
<li>Finance staff new to the industry who require a grounding in the various specialist discipline areas that typically comprise an oil and gas company finance function</li>
<li>Finance personnel who are being developed for broader accounting and financial management responsibilities</li>
<li>Audit and information systems staff who have frequent dealings with financial controls and systems</li>
<li>Treasury and tax specialists who require a better understanding of E&amp;P finance and accounting</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.</span></p>
<p><em><span>Course Duration: 3 days in total (21 hours).</span></em></p>
<p><strong><span>Training Schedule</span></strong></p>
<p><span>0830 - Registration </span><span>0900 - Start of training </span><span>1030 - Morning Break </span><span>1045 - Training recommences </span><span>1230 - Lunch Break </span><span>1330 - Training recommences </span><span>1515 - Evening break </span><span>1530 - Training recommences </span><span>1700 - End of Training</span></p>
<p><span>The maximum number of participants allowed for this training course is 25.</span></p>
<p><span>This course is also available through our Virtual Instructor Led Training (VILT) format.</span></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has more than 30 years of experience in the international oil and gas industry, covering all areas of Finance and Audit, including involvement in Commercial roles. During her 19 years with ENI she worked in Italy, Netherlands, Egypt and UK and was CFO for 2 major ENI subsidiaries. She has delivered training courses in Accounting, Audit, Economics and Commercial topics in many Countries.</p>
<p>She has a Degree in Economics &amp; Accounting and is a Certified Chartered Accountant. She is also a Chartered Auditor and an International Petroleum Negotiator. Outside of work, she is inspired by the beauty of nature and art, helping disadvantaged people, sports (football, golf) and her cat<em>.</em></p>
<p><strong>Courses Delivered Internationally:</strong></p>
<ul>
<li>E&amp;P Accounting, Auditing in the Oil &amp; Gas Industry</li>
<li>Cost Control &amp; Budgeting</li>
<li>Introduction to the Oil &amp; Gas Industry</li>
<li>Petroleum Project Economics</li>
<li>Contracts Strategy</li>
<li>International O&amp;G Exploitation Contracts</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Exploration & Production (E&P) Accounting Level 1

Gabrielle Motola

Digital Photography

Photo Editing

Photography Tools

Color Grading

Adobe Lightroom

Unlock the secrets of professional colour grading in this comprehensive 4-week workshop. Learn industry techniques, enhance your skills, and transform your projects. Perfect for photographers, filmmakers, and creatives. Places are limited and bursaries are available for those in need of financial support.

DEVELOP YOUR COLOUR GRADING STYLE - A FOUR-WEEK ADOBE LIGHTROOM MASTERCLASS

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Welcome</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Hello and welcome to our 1-day Introduction to Coaching.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Join Colin Brett, Founder, and Director of Training, who facilitates these free learning days online. If you select which day you&#39;d like to attend on our website we&rsquo;ll reserve and confirm a space for you.&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why Free?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">We recognise that signing up to a coach training involves work, time, effort, energy, finance and commitment. We thought the opportunity to join us for an experiential day may be useful in your decision-making process. Although the majority of those joining will be exploring training options, these days are also about &lsquo;coach education&rsquo; for those who would like to learn more about it&hellip;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">This day may be a good investment of your time if:</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">You&rsquo;re curious about what coaching actually is</li><li fr-original-style="" style="box-sizing: border-box;">You&rsquo;ve never tried it before, but would like to</li><li fr-original-style="" style="box-sizing: border-box;">You want to change career direction</li><li fr-original-style="" style="box-sizing: border-box;">Coach training would be an augment to your current skillset/role</li><li fr-original-style="" style="box-sizing: border-box;">Coaching is an approach you&#39;d like to bring into your current organisation</li><li fr-original-style="" style="box-sizing: border-box;">You&rsquo;d like to gain a practical understanding of what coaching is and how to do it</li><li fr-original-style="" style="box-sizing: border-box;">An opportunity to explore our approach to training would be useful</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&nbsp;</strong><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What does the day offer?&nbsp;</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">It&rsquo;s a day-long experiential opportunity for you to explore coaching in a safe, engaged environment. You will leave with a clear understanding of what coaching is and isn&#39;t; how it sits along-side the other talking modalities; what it would be like to train with us, and whether professional coach training is for you.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">During the day we will work through topics such as:</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Contracting and the importance of it</li><li fr-original-style="" style="box-sizing: border-box;">Core Competencies (as set down by the International Coaching Federation)</li><li fr-original-style="" style="box-sizing: border-box;">Comparisons between Formal and Informal Coaching</li><li fr-original-style="" style="box-sizing: border-box;">Definitions (as set down by the International Coaching Federation)</li><li fr-original-style="" style="box-sizing: border-box;">Practice Sessions (am and pm for comparison)</li><li fr-original-style="" style="box-sizing: border-box;">Live Coaching Demonstration and a Feedback Session based on it</li><li fr-original-style="" style="box-sizing: border-box;">Levels of Listening</li><li fr-original-style="" style="box-sizing: border-box;">Questioning</li><li fr-original-style="" style="box-sizing: border-box;">Q&amp;A Session</li><li fr-original-style="" style="box-sizing: border-box;">and more..!</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">About Coaching Development:</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><a href="https://www.coachingdevelopment.com/" target="_blank" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Coaching Development</a> has been established for over 20 years and is one of the premier international coach training institutes. Based in the UK, we have trained hundreds of coaches across the world and are proud to state that the majority of our graduates come to us via personal recommendation. The programmes we offer will equip you to practice in any sector: executive, business, individual, wellness, academia, fitness, therapeutic and many more; they are aimed at developing your skillset as a coach.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Our promise to you:</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">No selling! We will not attempt to sell our programmes to you, this day is a safe learning space.&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">We will be open and honest with you and tell you anything you want to know about us, our approach and our training.</li><li fr-original-style="" style="box-sizing: border-box;">This free day embodies Coaching Development&rsquo;s usual approach to training offering the deepest professional integrity, incorporating highly experiential, in-depth, adult-to-adult development.</li><li fr-original-style="" style="box-sizing: border-box;">Our commitment to your learning - we will be clear about the objectives for the day and partner with you to meet these.</li><li fr-original-style="" style="box-sizing: border-box;">Opportunities to practice, take advantage of feedback, collaborate and experience practical translation of the skillset.</li><li fr-original-style="" style="box-sizing: border-box;">Our training material is accredited by the International Coach Federation - the leading global body for professional coaching and coaches.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;If you&rsquo;d like an informal chat about any aspects of the introductory day or our training you&rsquo;re very welcome to give Isy a call on: 020 8541 1313 or visit : <a href="//www.coachingdevelopment.com" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">www.coachingdevelopment.com</a>&nbsp;</p>

Coaching Development Ltd

An ICF accredited coach training programme.

Coaching Development's FREE Introduction to Coaching Day

Burnley

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Have you ever wondered what is Reiki and would like to know more, then this course is for you if you would like to learn more about Reiki</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">This Reiki Level One course is for you if you have heard a lot about Reiki and are interested in learning more about Reiki and is an introductory course on how to use Reiki healing techniques.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">This is where you begin and my online course will teach you all you need to know to get you started with using Reiki on yourself and it is very simple to learn and to use. It is a gentle hands-on healing technique, which uses healing energy to treat any physical or emotional concerns.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Reiki is a helpful self-development technique for anyone wanting to learn more about reiki and how to enjoy the benefits of a healing treatment.</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The Reiki One course is taught live on line using Zoom.</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What will I learn on this course:-</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">What is Reiki and its history?</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">The Principles of Reiki</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Auras and chakras</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Preparation for your initiation to the Reiki energy or attunement</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">What does the Reiki energy feel like?</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">21 day cleansing process</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">How to practise self-healing on yourself</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Reiki and its uses with other therapies</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Your own Reiki Lineage</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Question and answer session&nbsp;</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">You will be initiated to the Reiki energy by an attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">The course can be booked online here and you will receive instructions on how to access the course.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(111, 114, 135);">I look forward to meeting you and sharing my knowledge and experience of Reiki with you.</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What this course offers you:</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Individual Support &ndash; During and after your course, if you have any questions</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Practical Experience &ndash; Step by step training is given so that you can gain valuable experience using Reiki on yourself</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Energy Perception &ndash; You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Personal Growth &ndash; You will discover for yourself the gift of Reiki healing and have increased confidence to use it for self-healing</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Testimonials:- What other students who have attended my courses are saying &nbsp;</strong></p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">Level One Course</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">&ldquo;I enjoyed this course and Margaret is a great teacher and her calming voice explains everything clearly&rdquo;. (Anne-Marie M)</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">&ldquo;This is a very informative course. It gave me everything I needed to know to start working with the Reiki energy. (Sally R.)</p><p style="color: rgb(111, 114, 135); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);">&ldquo;This course is excellent!&rdquo; (Phil T)</p>

Have you ever wondered what is Reiki and would like to know more, then this course is for you if you would like to learn more about Reiki
This Reiki Level One course is for you if you have heard a lot about Reiki and are interested in learning more about Reiki and is an introductory course on how to use Reiki healing techniques.
This is where you begin and my online course will teach you all you need to know to get you started with using Reiki on yourself and it is very simple to learn and to use. It is a gentle hands-on healing technique, which uses healing energy to treat any physical or emotional concerns.
Reiki is a helpful self-development technique for anyone wanting to learn more about reiki and how to enjoy the benefits of a healing treatment.
The Reiki One course is taught live on line using Zoom.
What will I learn on this course:-
What is Reiki and its history?
The Principles of Reiki
Auras and chakras
Preparation for your initiation to the Reiki energy or attunement
What does the Reiki energy feel like?
21 day cleansing process
How to practise self-healing on yourself
Reiki and its uses with other therapies
Your own Reiki Lineage
Question and answer session 
You will be initiated to the Reiki energy by an attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course.
I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.
The course can be booked online here and you will receive instructions on how to access the course.
I look forward to meeting you and sharing my knowledge and experience of Reiki with you.
What this course offers you:
Individual Support – During and after your course, if you have any questions
Practical Experience – Step by step training is given so that you can gain valuable experience using Reiki on yourself
Energy Perception – You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel
Personal Growth – You will discover for yourself the gift of Reiki healing and have increased confidence to use it for self-healing
Testimonials:- What other students who have attended my courses are saying 
Level One Course
“I enjoyed this course and Margaret is a great teacher and her calming voice explains everything clearly”. (Anne-Marie M)
“This is a very informative course. It gave me everything I needed to know to start working with the Reiki energy. (Sally R.)
“This course is excellent!” (Phil T)

Margaret Cook - Learn More About Reiki

Energy Healing

Reiki

Reiki Healer

I am a Reiki Teacher in Manchester and one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course. I teach all three levels of Reiki courses, level 1 reiki. level 2 reiki and reiki master level 3

Reiki Level One Online Course - New to Reiki this is for you

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><img src="https://images.cademy.co.uk/the-soul-shed/fd715e28-b008-42aa-90c3-52b7e0a88bd7/original.jpeg" style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable">On a Sunday close to the New Moon each lunar cycle, I&#39;m offering space for us to gather and for you to reconnect with your intuitive guidence in gentle restorative community. <br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;">This space is for you if&nbsp;</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">You&#39;re longing for spaciousness</li><li fr-original-style="" style="box-sizing: border-box;">Your whole &nbsp;system would appreciate the sense of a deep opening sigh</li><li fr-original-style="" style="box-sizing: border-box;">You know somewhere calling from within that Self Care has to be a priority</li><li fr-original-style="" style="box-sizing: border-box;">You are curious about learning intuitive creative practice that can restore a sense of balance, inner calm, and a sense of renewed capacity to play your part in life unfolding.&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">You&#39;d welcome an hour on a Sunday of relaxing restorative connection.</li></ul><div fr-original-style="" style="box-sizing: border-box;"><img src="https://images.cademy.co.uk/the-soul-shed/c6e2a8f2-d1fd-43ba-814d-5b23c927b6f9/original.jpeg" style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable"><br fr-original-style="" style="box-sizing: border-box;"></div><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">You will have a series of invitations to&nbsp;</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Be with your breath in ways that make you feel powerfully connected to yourself and your lifeforce.</li><li fr-original-style="" style="box-sizing: border-box;">Come to know yourself as three centred: full of instinctual knowing, heart connections, and an open curious mind.</li><li fr-original-style="" style="box-sizing: border-box;">Connect with imagery that speaks deeply to how you are feeling, and learn the wisdom it has to share with you.</li><li fr-original-style="" style="box-sizing: border-box;">Explore photos you have taken in your own square mile of location to experience a deeper sense of belonging to place.</li><li fr-original-style="" style="box-sizing: border-box;">Journal to find new ways of expressing ideas that emerge in these session.</li><li fr-original-style="" style="box-sizing: border-box;">Meet others on a journey of self-discovery</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><img src="https://images.cademy.co.uk/the-soul-shed/e7785701-8274-46e0-821b-01a7820419e6/original.jpeg" style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">If this appeals, I very much look forward to seeing you !</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Dates and themes:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Sunday 10th March - Emergence &nbsp;-Being with your lifeforce</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Sunday 7th April &nbsp;- Mandala -Healing &nbsp;patterns in nature &nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Sunday 12th May - &nbsp;Belonging - Witnessing Trees</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Sunday 9th June - A quiet inner voice - encircling an image</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Sunday 7th July - encounters and initiations - equanimity</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Sunday 4th August - deep in the woods -keeping faith</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Sunday 1st September - Arrival of the pioneer </p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Sunday 6th October</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Sunday 3rd November</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p>


On a Sunday close to the New Moon each lunar cycle, I'm offering space for us to gather and for you to reconnect with your intuitive guidence in gentle restorative community. This space is for you if
You're longing for spaciousness
Your whole system would appreciate the sense of a deep opening sigh
You know somewhere calling from within that Self Care has to be a priority
You are curious about learning intuitive creative practice that can restore a sense of balance, inner calm, and a sense of renewed capacity to play your part in life unfolding.
You'd welcome an hour on a Sunday of relaxing restorative connection.

You will have a series of invitations to 
Be with your breath in ways that make you feel powerfully connected to yourself and your lifeforce.
Come to know yourself as three centred: full of instinctual knowing, heart connections, and an open curious mind.
Connect with imagery that speaks deeply to how you are feeling, and learn the wisdom it has to share with you.
Explore photos you have taken in your own square mile of location to experience a deeper sense of belonging to place.
Journal to find new ways of expressing ideas that emerge in these session.
Meet others on a journey of self-discovery

If this appeals, I very much look forward to seeing you !


Dates and themes:
Sunday 10th March - Emergence -Being with your lifeforce
Sunday 7th April - Mandala -Healing patterns in nature 
Sunday 12th May - Belonging - Witnessing Trees
Sunday 9th June - A quiet inner voice - encircling an image
Sunday 7th July - encounters and initiations - equanimity
Sunday 4th August - finding non attachment
Sunday 1st September -follow the sun
Sunday 6th October - surrender to the holy plan!
Sunday 3rd November  - return to the innocence







The Soul Shed

Time and space  for you to reconnect with your intuitive guidence in gentle restorative community.


Sunday Openings at The Soul Shed

Bromley

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">ECS Health &amp; Safety Courses&nbsp;</strong>and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.</p><p style="text-align: center; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="text-align: center;"><a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-size: 24px; box-sizing: border-box;" fr-original-style="font-size: 24px;">Learn More @ MJ Electrical Training &gt;&gt;</span></strong></a></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core Day</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why is the ECS Labourer Card Important?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Pathways to the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">1.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route One</strong>: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">2.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route Two</strong>: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety Exemption</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who Should Take This Course?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Benefits of the SPA Health &amp; Safety Core Day</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Comprehensive Training</b>: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Flexible Learning</b>: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Certification</b>: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Further Opportunities with the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Verify and Stay Updated</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Conclusion</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Taking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p>

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Health & Safety

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Kent

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">ECS Health &amp; Safety Courses&nbsp;</strong>and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.</p><p style="text-align: center; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="text-align: center;"><a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-size: 24px; box-sizing: border-box;" fr-original-style="font-size: 24px;">Learn More @ MJ Electrical Training &gt;&gt;</span></strong></a></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core Day</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why is the ECS Labourer Card Important?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Pathways to the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">1.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route One</strong>: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">2.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route Two</strong>: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety Exemption</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who Should Take This Course?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Benefits of the SPA Health &amp; Safety Core Day</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Comprehensive Training</b>: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Flexible Learning</b>: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Certification</b>: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Further Opportunities with the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Verify and Stay Updated</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Conclusion</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Taking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p>

ECS Card Health & Safety Course Bromley

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">ECS Health &amp; Safety Courses&nbsp;</strong>and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.</p><p style="text-align: center; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="text-align: center;"><a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-size: 24px; box-sizing: border-box;" fr-original-style="font-size: 24px;">Learn More @ MJ Electrical Training &gt;&gt;</span></strong></a></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core Day</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why is the ECS Labourer Card Important?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Pathways to the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">1.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route One</strong>: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">2.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route Two</strong>: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety Exemption</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who Should Take This Course?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Benefits of the SPA Health &amp; Safety Core Day</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Comprehensive Training</b>: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Flexible Learning</b>: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Certification</b>: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Further Opportunities with the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Verify and Stay Updated</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Conclusion</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Taking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p>

ECS Card Health & Safety Course Dover

ECS Card Health & Safety Course Liverpool

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is intended for experienced IT security-related practitioners, auditors, consultants, investigators, or instructors, including network or security analysts and engineers, network administrators, information security specialists, and risk management professionals, who are pursuing CISSP training and certification to acquire the credibility and mobility to advance within their current computer security careers or to migrate to a related career. Through the study of all eight CISSP Common Body of Knowledge (CBK) domains, students will validate their knowledge by meeting the necessary preparation requirements to qualify to sit for the CISSP certification exam. Additional CISSP certification requirements include a minimum of five years of direct professional work experience in two or more fields related to the eight CBK security domains, or a college degree and four years of experience.</p>Overview<p>#NAME?</p><p>In this course, students will expand upon their knowledge by addressing the essential elements of the 8 domains that comprise a Common Body of Knowledge (CBK)Â© for information systems security professionals.</p>Prerequisites<p></p><ul><li>CompTIA Network+ Certification</li></ul><p></p></div><div id="course-pills-2"><h3>1 - Security and Risk Management</h3> <ul> <li>Security Governance Principles</li> <li>Compliance</li> <li>Professional Ethics</li> <li>Security Documentation</li> <li>Risk Management</li> <li>Threat Modeling</li> <li>Business Continuity Plan Fundamentals</li> <li>Acquisition Strategy and Practice</li> <li>Personnel Security Policies</li> <li>Security Awareness and Training</li> </ul> <h3>2 - Asset Security</h3> <ul> <li>Asset Classification</li> <li>Privacy Protection</li> <li>Asset Retention</li> <li>Data Security Controls</li> <li>Secure Data Handling</li> </ul> <h3>3 - Security Engineering</h3> <ul> <li>Security in the Engineering Lifecycle</li> <li>System Component Security</li> <li>Security Models</li> <li>Controls and Countermeasures in Enterprise Security</li> <li>Information System Security Capabilities</li> <li>Design and Architecture Vulnerability Mitigation</li> <li>Vulnerability Mitigation in Embedded, Mobile, and Web-Based Systems</li> <li>Cryptography Concepts</li> <li>Cryptography Techniques</li> <li>Site and Facility Design for Physical Security</li> <li>Physical Security Implementation in Sites and Facilities</li> </ul> <h3>4 - Information Security Management Goals</h3> <ul> <li>Organizational Security</li> <li>The Application of Security Concepts</li> </ul> <h3>5 - Information Security Classification and Program Development</h3> <ul> <li>Information Classification</li> <li>Security Program Development</li> </ul> <h3>6 - Risk Management and Ethics</h3> <ul> <li>Risk Management</li> <li>Ethics</li> </ul> <h3>7 - Software Development Security</h3> <ul> <li>Software Configuration Management</li> <li>Software Controls</li> <li>Database System Security</li> </ul> <h3>8 - Cryptography</h3> <ul> <li>Ciphers and Cryptography</li> <li>Symmetric-Key Cryptography</li> <li>Asymmetric-Key Cryptography</li> <li>Hashing and Message Digests</li> <li>Email, Internet, and Wireless Security</li> <li>Cryptographic Weaknesses</li> </ul> <h3>9 - Physical Security</h3> <ul> <li>Physical Access Control</li> <li>Physical Access Monitoring</li> <li>Physical Security Methods</li> <li>Facilities Security</li> </ul></div>

636 Courses in Edinburgh

Design Of Circulating Fluidized Bed Boilers

By EnergyEdge - Training for a Sustainable Energy Future

Combustion Engineering for Coal Fired Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Root Cause Analysis for Boilers and Steam Cycle Failures

By EnergyEdge - Training for a Sustainable Energy Future

Commissioning and Start-Up Activities of Coal Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Basin Analysis and Petroleum Systems

By EnergyEdge - Training for a Sustainable Energy Future

MySQL server administration

By Systems & Network Training

2 Day Certificate in Indian Head Massage Course(7th&8th Sept)

By ms geraldine mccullagh

Train The Trainer

By Lapd Solutions Ltd

Definitive Asterisk for engineers

By Systems & Network Training

Exploration & Production (E&P) Accounting Level 1

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location