Name: 4G & 5G Roaming Scenarios & Procedures
Price: 2367 GBP
Availability: InStock

Redhill

<h3>VoIP training course description</h3>
 
 Convergence of voice and data is now a common place mainstream technology. Our Voice Over IP course investigates the characteristics of voice transmission and then studies the impact on IP networks. Practical sessions with soft phones, hard phones and gateways allow the students to see all aspects of VoIP. Network analysers are used to study packets on the wire. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Describe the issues of voice and data convergence.</li>
 <li>Describe techniques, which can be used in IP to provide low uniform delay. </li>
 <li>Evaluate VoIP technologies.</li>
 <li>Design data networks, which will support voice.</li>
 </ul>
 
 <h5>
 VoIP training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone working in the field of networking or telecommunications. 
 
							<li>Prerequisites:</li>
							
 TCP/IP foundation for engineers Intro to data communications &amp; networking
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>VoIP training course contents</h3>
 <ul>
				<li>What is VoIP</li>
				Voice over IP, brief review of IP, brief review of
telephones and voice.
<li>Configuring IP softphones</li>
What are softphones? Downloading, installing.
 Hands on Building the base IP network, a simple
VoIP call with softphones, Internet telephony.
<li>Addressing</li>
E164, FQDN, IP addresses, URIs, DNS, SIP
addressing, H.323 addressing.
<li>VoIP issues</li>
Bandwidth, Delay, Jitter, digitising voice,
digitisation steps, coding, quality issues, MOS,
voice compression, silence suppression,
packetising voice, prioritising voice, jitter buffers.
 Hands on Simple packet analysis.
<li>Architectures</li>
Desktop, backbone, gateway, hard phones, PoE,
integrating phones and PCs, carriers,
Softswitches. Hands on Integrating Softphones,
hard phones and analog phones.
<li>IP performance and QoS</li>
ITU delay recommendations, IP DSCP field,
DiffServ, IP precedence, queuing strategies; FIFO,
WFQ, custom, priority, RED, LLQ.
<li>VoIP protocol stack</li>
RTP, RTCP, mixers and translators, RSVP.
Bandwidth, Erlang models, link layer overhead.
 Hands on Calculating VoIP bandwidth, analysing
RTP packets.
<li>ITU Recommendation H.323</li>
Architecture, protocols, terminals, Call setup,
Gatekeepers, gateway discovery, H.323
registration with a gatekeeper. Hands on PC to
PC using H.323.
<li>IETF - Session Initiation Protocol</li>
What is SIP? SIP protocol stack, SDP, Sip
architecture, SIP messages, Initial SIP phone
startup, SIP servers, proxy server, redirect server.
 Hands on PC to PC using SIP.
<li>Carrier networks</li>
Signalling systems, SS7, media gateways, Media
gateway controllers, signalling gateways, MGCP,
Megaco, SIGTRAN. Hands on PSTN
interworking.
<li>Video over IP</li>
Video components, digital video, pictures and
audio, video codecs, issues and solutions, video
conferencing, multipoint video conferencing, video
protocol stack.
<li>Appendix 1: Multicasting.</li>
<li>Appendix 2: Voice/data integration without IP. </li> 


 </ul>

Systems & Network Training

Network & Security

Network Engineer

Definitive VoIP for engineers

General Admission

<h3>LTE Architecture and Protocols course description</h3>
 This course provides a comprehensive tour of the LTE
architecture along with services provided and the
protocols used.
 
				<h5>What will you learn</h5>
				<ul>
				 
			
 <li>Describe the overall architecture of LTE.</li>
																				<li>Explain the information flows through LTE.</li>
 <li>Describe the LTE security.</li>
 <li>Describe LTE mobility management.</li> 
 <li>Recognise the next steps for LTE.</li>
 </ul>
 <h5>
 LTE Architecture and Protocols course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone working with LTE.
 
							<li>Prerequisites:</li>
							
 Mobile communications demystified
							
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>LTE Architecture and Protocols course contents</h3>
 <ul>
				<li>Introduction </li>
History, LTE key features. The 4G ITU process. The LTE 3GPP specifications. Specifications.

<li>System Architecture </li>
LTE hardware architecture. UE architecture and capabilities. E-UTRAN and eNB. EPC, MME functions, SGW, PGW and PCRF. System interfaces and protocol stacks. Example information flows. Dedicated and default bearers. EMM, ECM, RRC state diagrams.

<li>Radio transmission and reception </li>
OFDMA, SC-FDMA, MIMO antennas. Air interface protocol stack. Logical, transport and physical channels. Frame and slot structure, the resource grid. Resource element mapping of the physical channels and signals. Cell acquisition, data transmission and random access. MAC, RLC, PDCP protocols. LTE spectrum allocation.

<li>Power-on procedures </li>
Network and cell selection. RRC connection establishment. Attach procedure, including IP address allocation and default bearer activation. LTE detach procedure.

<li>Security in LTE networks </li>
LTE security features, identity confidentiality, ciphering and integrity protection. Architecture of network access security in LTE. Secure key hierarchy. Authentication and key agreement procedure. Security mode command procedure. Network domain security architecture. Security associations using IKE and IPSec.

<li>Mobility management </li>
RRC_IDLE, RRC_CONNECTED. Cell reselection, tracking area updates. Measurement reporting. X2 and S1 based handovers. Interoperation with UMTS, GSM and non-3GPP technologies such as cdma2000.

<li>QoS, policy control and charging </li>
QoS in LTE, EPS bearers, service data flows and packet flows. The architecture and signalling procedures for policy and charging control. Data transport using GPRS, differentiated services and MPLS. Offline and online charging in LTE.

<li>Delivery of voice and text messages over LTE </li>
Difficulties and solutions for Voice over LTE. Architecture and call setup procedures for circuit switched fallback. Architecture, protocols and call setup procedures in IP multimedia subsystem.

<li>Enhancements in release 9 </li>
LTE location services. Multimedia broadcast / multicast service and MBSFN. Cell selection, commercial mobile alert service.

<li>LTE Advanced and release 10 </li>
Impact of carrier aggregation on LTE air interface. Enhanced MIMO processing on uplink and downlink. Relaying. Release 11 and beyond.

<li>OAM and self organising networks </li>
Operation, administration, maintenance and provisioning for LTE. Self-configuration of base station parameters. Fractional frequency re-use, inter-cell interference co-ordination. Self-optimisation of base station procedures. Self-healing to detect and recover from faults.
 </ul>

LTE Architecture and Protocols

<h3>Total QoS training course description</h3>
 An advanced technical hands on course focusing on
Quality of Service issues in IP networks.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Explain the difference between Integrated services and differentiated services.</li>
										<li>Explain how DiffServ works.</li> 
										<li>Explain how RSVP works. </li>
										<li>Design networks supporting QoS.</li>
 </ul>
 <h5>
 Total QoS training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Network administrators. 
 Network operators. 
 
							<li>Prerequisites:</li>
							
 TCP/IP Foundation for engineers
 
							<li>Duration</li>
							
 3 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Total QoS training course contents</h3>
			<ul>	<li>What is QoS</li>
QoS and CoS, throwing bandwidth at the problem,
Best effort services, Differentiated services,
Integrated services, guarantees, the need for QoS,
IETF working groups.
				<li>Application issues</li>
Video, Voice, other applications, Jitter, delay,
packet loss. Flows, per flow and per aggregate
QoS, Stateful vs. stateless QoS, applications vs.
network QoS.
<li>'Traditional' IP QoS</li>
The TOS field and precedence, the obsolete
OSPF use of the TOS field, TCP congestion
avoidance.
<li>Queuing</li>
Where to use queuing, FIFO, Priority queuing,
Custom queuing, Weighted Fair Queuing,
CBWFQ, PQWFQ, LLQ, RED and WRED.
<li>DiffServ</li>
Architecture, DSCP, CU, packet classification and
marking, meters and conditioners, Bandwidth
brokers and COPS, Per Hop Behaviours, best
effort PHB, Assured Forwarding PHB, Expedited
forwarding PHB, Network Based Application
Recognition (NBAR).
<li>Layer 2 issues</li>
Fragmentation and interleaving, compression
(codecs, MPEG formats, header compressionâ¦),
802.1p, Subnet bandwidth management,
Bandwidth allocators and requestor modules, the
use of MPLS, traffic engineering, traffic shaping.
<li>RSVP</li>
What is RSVP? architectures, paths, path
messages, reservations, traffic specifications, tear
downs, guaranteed and controlled load, token
buckets, Call Admission Control in voice
networks, gatekeepers.
	<li>Other issues</li>
Policy based routing, the Resource Allocation
Protocol, QoS management tools, baselining
networks, design issues, QoS in IPv6, QoS and
	multicasts.
				</ul>

Total QoS for engineers

<h3>IP broadcast training course description</h3>
 A current hot topic in recent years has been the provision of multimedia services over IP networks aka triple or quadruple play. This course investigates the characteristics of video transmission and then studies the impact on IP networks.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Use Wireshark to analyse and troubleshoot TV streams.</li>
											<li>Describe techniques, which can be used in IP to provide low uniform delay.</li>
											<li>Evaluate IPTV technologies.</li>
											<li>Design data networks, which will support IPTV.</li>
 </ul>
 
 <h5>
 IP broadcast training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone working in broadcast. 
 
							<li>Prerequisites:</li>
							
 TCP/IP foundation for engineers
 
							<li>Duration</li>
							
 3 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>IP broadcast training course contents</h3>
 <ul>
				<li>What is IPTV?</li>
What is IP? What is TV? Pixels, frames, colour,
digital modulation, digital video broadcasting.
SDTV, HDTV, 4K. IPTV architectures,
Contribution, distribution, delivery. IPTV
standards. Hands on Base IP connectivity, VLC.
<li>IPTV protocol stacks</li>
IP, TCP, UDP, RTP. IPv6. HTTP. Bandwidth
requirements. Hands on IPTV bandwidth
calculations.
<li>Video codecs</li>
What is a CODEC, pictures and audio, digitisation,
sampling, quantisation, encoding, compressing.
MPEG, bit rates, resolution. I, B, P frames, GOP.
MPEG 2, MPEG 4, H.264, H.265, VP9, AV1.
 Hands on Analysing MPEG frames.
<li>IP issues</li>
Quality vs. bandwidth. Bandwidth, delay, latency,
jitter, signalling. Routers. Hands on Analysing
jitter and other performance issues.
<li>IPTV performance and QoS</li>
IP DSCP field, queuing strategies; FIFO, WFQ,
custom, priority, RED. Differentiated services,
Diffserv. 802.1Q. Traffic shaping. QoE. Hands on
best effort versus prioritisation.
<li>UDP versus TCP</li>
Reliable, unreliable, connection oriented,
connectionless. Broadcasts, multicasts and
unicasts. TCP flow control, TCP and
performance. Hands on TCP window sizes.
<li>RTP</li>
RTP, ports, mixers, translators, RTCP, SMPTE,
FEC. Hands on RTP analysis with Wireshark.
<li>Multicasting</li>
Multicasting compared to unicasting and
broadcasting, when to use and when not to use
multicasting. IGMP, PIM-SM, SSM. MLD. Hands on Analysing multicast streams.
<li>OTT TV</li>
HTTP, HTTPS, Chunked HTTP. Adaptive
streaming. HTML5. DASH vs HLS. Hands on
Analysing HTTP streams.
<li>Security</li>
Firewalls, TLS, DRM, watermarking. Encryption.
Geolocation. VPNs.
<li>IPTV architecture and other protocols</li>
Content providers, Service providers, delivery
networks, home networks. Caching, Service
discovery. RTSP. SAP, SDP. DHCP, DNS, NTP 
 </ul>

IP broadcast fundamentals

<h3>Junos Operating System training course description</h3>
 This course provides students with the foundational
 knowledge required to work with the Junos OS and to
 configure Junos devices. The course provides a brief
 overview of the Junos device families and discusses
 the key architectural components of the software. The
 course then delves into foundational routing knowledge
 and configuration examples including general routing
 concepts, routing policy, and firewall filters. Delegates
 will gain experience in configuring and monitoring the
 Junos OS and monitoring basic device operations. This
 course is based on Junos OS Release 15.1X49.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Describe the design architecture of the Junos OS.</li>
 <li>Navigate within the Junos CLI and perform tasks
 within the CLI operational and configuration modes.</li>
 <li>Configure and monitor network interfaces.</li>
 <li>Navigate within the Junos J-Web interface.</li>
 <li>Identify where you might use firewall filters.</li>
 <li>Explain basic routing operations and concepts.</li>
 <li>Identify key factors in Juniper Networks' security.</li>
 </ul>
 <h5>
 Junos Operating System training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 This course benefits individuals responsible for
 configuring and monitoring devices running the Junos
 OS.
 
							<li>Prerequisites:</li>
							
 TCP/IP foundation for engineers
 
							<li>Duration</li>
							
 3 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Junos Operating System training course contents</h3>
 <ul>
 <li>Junos Operating System Fundamentals </li>
 The Junos OS 
 Traffic Processing 
 Overview of Junos Devices 
 <li>User Interface Options-The Junos CLI </li>
 User Interface Options 
 The Junos CLI: CLI Basics 
 The Junos CLI: Operational Mode 
 The Junos CLI: Configuration Mode 
 <li>User Interface Options-The J-Web Interface </li>
 The J-Web GUI 
 Configuration 
 Lab 1: User Interface Options 
 <li>Initial Configuration </li>
 Factory-Default Configuration 
 Initial Configuration 
 Interface Configuration 
 Lab 2: Initial System Configuration 
 <li>Secondary System Configuration </li>
 User Configuration and Authentication 
 System Logging and Tracing 
 Network Time Protocol 
 Archiving Configurations 
 SNMP 
 Lab 3: Secondary System Configuration 
 <li>Operational Monitoring and Maintenance </li>
 Monitoring Platform and Interface Operation 
 Network Utilities 
 Maintaining the Junos OS 
 Password Recovery 
 System Clean-Up 
 Lab 4: Operational Monitoring and Maintenance 
 <li>Interface Configuration Examples </li>
 Review of the Interface Configuration Hierarchy 
 Interface Configuration Examples 
 Using Configuration Groups 
 <li>Routing Fundamentals </li>
 Routing Concepts: Overview of Routing 
 Routing Concepts: The Routing Table 
 Routing Concepts: Routing Instances 
 Static Routing 
 Dynamic Routing 
 Lab 5: Routing Fundamentals 
 <li>Routing Policy </li>
 Routing Policy Overview 
 Case Study: Routing Policy 
 Lab 6: Routing Policy 
 <li>Firewall Filters </li>
 Firewall Filters Overview 
 Case Study: Firewall Filters 
 Unicast Reverse-Path-Forwarding Checks 
 Lab 7: Firewall Filters 
 <li>Class of Service </li>
 CoS Overview 
 Traffic Classification 
 Traffic Queueing 
 Traffic Scheduling 
 Case Study: CoS 
 Lab 8: Class of Service 
 <li>JTAC Procedures </li>
 Opening a Support Case 
 Customer Support Tools 
 Transferring Files to JTAC 
 <li>Juniper Security Concepts </li>
 Security Challenges 
 Juniper's Security Focus 
 <li>Appendix A: IPv6 Fundamentals </li>
 IPv6 Addressing 
 Protocols and Services 
 Configuration
 </ul>

Introduction to the Junos Operating System

<h3>Definitive Segment Routing course description</h3>
 This Segment Routing (SR) training course is a
comprehensive program designed to equip network
professionals with the knowledge and skills needed to
implement and manage SR in modern networking
environments. Segment Routing is a cutting-edge
network architecture that enhances network flexibility,
scalability, and efficiency. This course offers in-depth
coverage of SR principles, protocols, and practical
implementation techniques. Hands on sessions are
used to reinforce the theory rather than teach specific
manufacturer equipment.

 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Explain packet paths when implementing SLB.</li>
					<li>Explain how Segment Routing works.</li>
<li>Explain the relationship between SR and MPLS.</li>
<li>Use SR for Traffic Engineering.</li>
<li>Troubleshoot Segment Routing.</li>
<li>Implement TI-LFA using Segment Routing</li>
 </ul>
 
 <h5>
 Definitive Segment Routing course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 This course is ideal for network engineers, architects, and
administrators who want to stay up-to-date with the latest
networking technologies and enhance their expertise in
Segment Routing.
 
							<li>Prerequisites:</li>
							
 Concise MPLS for engineers 
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Definitive Segment Routing course contents</h3>
 <ul>
	 
		 
<li>Introduction to Segment Routing (SR)</li>
What is SR? Source based routing, SPRING,
history, segments, why SR? SR benefits.SR usage:
Traffic Engineering, Shortest path, local protection.
Relationship between SR and MPLS, SRv6. Hands on Investigating the base network.
<li>Segment Routing architecture</li>
SR domains, SR paths, SR segments. Segment
types. Segment IDs, combining segments, IGP
extensions, control plane components. Hands on 
Configuring SR, exploring how SR works,
<li>Segment Routing protocols</li>
SR-MPLS. MPLS label stack operations. Segment
Routing Global Block (SRGB). SRLB. IS-IS and
OSPF extensions for SR. Prefix segments,
adjacency segments. SRGB/IGP interactions.
Multidomain SR policies. SPF, Strict SPF. Hands on Analysing IGP SR extension operation.
Investigating the SRGB.
<li>Segment Routing Traffic Engineering</li>
RSVP-TE versus SR-TE. SR policies. Anycast and
binding SIDs. SR flexible algorithm flex-algo,
Performance measurement delay. Hands on
Optimising network paths for various applications.
<li>SR integration with 'older' technologies</li>
MPLS and LDP integration with SR. Hands on 
Integration.
<li>Topology Independent Loop Free Alternative</li>
Classic LFA and IP/MPLS protection mechanisms.
TI-LFA protection options. Hands on TI-LFA
operation with SR and LDP traffic.
<li>Scenarios</li>
SDN. Managing SR with SR controllers. Analyse,
optimise, automate. Network slicing.
<li>BGP peering segments</li>
Path Computation Elements, BGP Link State. BGP
prefix segments, BGP peer segments. Egress peer
engineering. SR enabled VPNs. Hands onBGP
segment routing.
<li>Troubleshooting Segment Routing</li>
IP toolkit: ping and traceroute. MPLS toolkit: MPLS
ping, MPLS echo request/reply, MPLS ping, MPLS
traceroute and path discovery. Router show
commands. Hands on Used throughout the course
during exercises.
<li>SRv6</li>
Note this is an optional extra day. See our one
day SRv6 course for details. IPv6 headers review,
routing headers, IPv6 segment, SRv6 segment
Identifiers. IPv6 Segment Routing Header. SRH
procedures. Hands on Configuring SRv6,
Analysing SRv6 operation.

 </ul>

Definitive Segment Routing for engineers

<h3>IPv6 training course description</h3>
 
 IPv6 is the next generation Internet Protocol. This hands-on course looks at the benefits and features of the new protocol along with an assessment of the likely impact of the protocol and migration strategies. Practical exercises using PCs and routers follow the major sessions in order to reinforce the theory.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Configure PCs and routers for IPv6.</li>
					<li>Troubleshoot IPv6 networks.</li>
					<li>Analyse IPv6 packets.</li>
					<li>Plan migration strategies for IPv6.</li>
					<li>Integrate IPv6 and IPv4 networks.</li>
 </ul>
 <h5>
 IPv6 training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone working in the field of networking. 
 
							<li>Prerequisites:</li>
							
 TCP/IP Foundation for engineers
 
							<li>Duration</li>
							
 3 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>IPv6 training course contents</h3>
				<ul>	<li>Introduction</li>
Reasons for IPv6, IPv4 weaknesses, what is IPv6?
IPv4 solutions for solving address wastage, the
origins of IPv6. hands on IPv6 on a PC, IPv6 on a
router.
<li>IPv6 addressing</li>
IPv6 address allocation, address format, Prefixes
but no masks, address categories, scope zones,
aggregatable global unicast, link local, Unicast,
Multicast, Anycast. Prefix delegation. hands on Link
local addresses, manual address configuration,
name resolution.
<li>Plug and play</li>
Plug and play addressing, ICMP neighbour
discovery, router solicitation, DHCPv6, stateful
autoconfiguration and stateless autoconfiguration.
 hands on Plug and play addresses and default
gateways.
<li>The IPv6 header</li>
The IPv4 header, IPv6 header format, QoS, flow
control, priority field, extension headers, hop by hop,
destinations header, fragmentation header, security,
IPsec, AH, ESP, TCP and UDP, ICMPv6. hands on
IPv6 packet analysis.
<li>Migrating to IPv6</li>
Overview, migration, dual stack, IPv4 compatible
addresses, DNS, IPv6 DNS issues, AAAA records,
IPv6 reverse delegation, DNS transport, protocol
translators, NAT-PT, NAPT-PT, NAT64, DNS64,
tunnelling, tunnel establishment, tunnel brokers,
Tunnel types. hands on Dual stack operation,
tunnelling, IPv6 name resolution.
		<li>IPv6 routing</li>
IPv6 routing, RIPng packet format, RIPng for IPv6,
OSPF for IPv6, MBGP, multiprotocol routing, MBGP
and multicasts, MBGP and IPv6. hands on Base
router setup for IPv6, IPv6 static routes, RIPng,
OSPFv3. MBGP
				</ul>

Total IPv6 for engineers

<h3>Voice over LTE training course description</h3>
 This course provides a basic understanding of the 3G
LTE Air Interface, SAE, as well as Voice over LTE
options and LTE Advanced features. Investigating the
standards for the EPS , formulated by the 3GPP
standards body, the course will set out to examine and
explain the 4G environment from user equipment to
border gateway and beyond. This course will ensure
the delegate has a grasp of all aspects of the current
global deployments, the next steps in upgrades and the
promise of things to come.
 
				<h5>What will you learn</h5>
				<ul>
				 
			
 <li>Describe the complete EPC architecture.</li>
																				<li>Explain the use of QoS within the air interface &amp;
core network.</li>
 <li>Explore the features of LTE advanced.</li>
 <li>Describe the various methods of supporting voice
services with 3G LTE.</li> 
 
 <li>Describe IMS structure and control entities.</li>
																				<li>Explain an IMS session.</li>
 </ul>
 <h5>
 Voice over LTE training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Any engineers who are assisting in the deployment of
voice services within their LTE networks.
 
							<li>Prerequisites:</li>
							
 Intro to Data comms &amp; networking 
								Telecommunications Introduction
							
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Voice over LTE training course contents</h3>
 <ul>
				<li>3GPP standards body </li>
Release 8 - Release 12, Supported and expected features.

<li>The EPC revisited </li>
EPC revisited 3G LTE &amp; EPC Architecture, NB, MME, SGW, PDNGW, PCRF, Interworking capabilities, Protocol stack explored, NAS signalling, Default EPS bearer, Slot allocation algorithms, Scheduling algorithms, Quality of Service requirements, Dedicated EPS bearers.

<li>VoLTE deployment strategies </li>
Common networks everywhere, GSM/WCDMA view, CDMA view.

<li>VoLTE system architecture </li>
LTE radio, LTE Radio background, LTE radio architecture, Evolved packet core, EPC entities &amp; functions, EPS mobility management, MS entities, Home subscriber server, Policy &amp; charging rules function.

<li>VoLTE functionality </li>
Radio functionality, Bearers &amp; schedulers, Mobility, Circuit switched fall back handover, Mobility from 2G/3G back to LTE, Power Saving Features, Positioning services, UE radio access capabilities for VoLTE users.
EPC functionalities, LTE subscriber identification, PDN connectivity establishment, EPS dedicated bearer setup, IMS identification, IP multimedia identification module, Public user identity, Private user identity, Relationship between public &amp; private identity, identification of users device, identification of network entities, identification of services, identification without ISIM.
IMS service provisioning, Enforcement of allowed services, Service triggering information, Selection of the AS, AS behaviour, Service provisioning in action.

<li>VoLTE end-to-end &amp; signalling </li>
VoLTE subscription &amp; device configuration.
EPS attach for CSFB/IMS VoIP &amp; default bearer.
IMS registration, Constructing the REGISTER request, From UE to P-CSCF, From P-CSCF to I-CSCF, From I-CSCF to S-CSCF, S-CSCF challenges the UE, UE's response to the challenge, Registration at the S-CSCF, The 200 OK response, Third-party registration to application servers, Subscription to registration event package, Re-registration &amp; re-authentication, De-registration, Related standards.
IMS VoIP session, Constructing the INVITE request, Routing, Media negotiation, Media resource reservation &amp; policy control, Charging, Session release.
Voice continuity, PS - PS intersystem handover, Single radio voice call continuity.
IMS emergency session, PDN Connection setup for emergency session, Emergency registration, Emergency session.
CS fallback for EPS call case, Architecture of CS fallback in EPS, Description of SGs interface, Idle mode signalling reduction, Idle mode vs active mode, CS fallback attachment, Mobile originating call using CSFB, Mobile terminating call using CSFB, Call unrelated CSFB procedures, Mobile terminating roaming retry &amp; forwarding.
VoLTE Messaging, Native IMS messages, SMS interworking, Multimedia messaging service.
Unstructured supplementary services data simulation in IMS.

<li>IMS services </li>
VoLTE radio performance
Coverage, Latency, Capacity.

<li>LTE advanced features </li>
Carrier aggregation, Coordinated mMulti-point Operation (CoMP), ICIC &amp; eICIC, Relay node deployment &amp; donor eNBs, Improved cell edge coverage, Reduced control plane latency, Heterogeneous networks, HeNB, security gateways, HeNB gateways.
 </ul>

Voice over LTE

<h3>SIP training course description</h3>
 A hands on course covering IP telephony with SIP. The course starts with a brief review of knowledge students should already possess including RTP and RTCP. The main focus is on SIP though, progressing from what SIP is through SIP signalling, call processing and architectures, moving onto more advanced issues including security, multimedia, and interoperability. Hands-on practicals follow each major theory session. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Explain how SIP works.</li>
					<li>Analyse SIP packets.</li>
					<li>Deploy SIP IP telephony solutions.</li>
 <li>Integrate SIP with other telephony solutions.</li>
 </ul>
 
 <h5>
 SIP training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Technical staff working with SIP. 
 
							<li>Prerequisites:</li>
							
 Definitive VoIP for engineers 
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>SIP training course contents</h3>
 <ul>
				<li>VoIP review</li>
What is VoIP? Brief review of IP, Brief review of
telephones and voice. RTP, RTCP, mixers and
translators. Hands on Analysing RTP packets.
				<li>What is SIP?</li>
Why SIP? SIP history, SIP standards, SIP
capabilities, key services, how SIP works, and a
basic SIP call. Hands on Peer to peer SIP.
<li>SIP messages</li>
SIP sessions, SIP flows, Message structure,
INVITE, ACK, BYE, CANCEL, OPTIONS,
REGISTER. Extension methods. Response codes.
SIP call flows. Hands on Analysing SIP packets.
<li>SIP architectures</li>
UA client, UA server, Proxy servers, Redirect
servers, registrars. SIP phones, gateways,
application servers, and other products. Stateful
and stateless servers. Various call scenarios.
 Hands on SIP proxies.
<li>SIP addressing</li>
URLs, SIP addresses, registration, Location and
Directory servers. Address tracking. Hands on SIP
and DNS.
<li>Supplementary services</li>
SIP signalling, signalling compression, Call hold,
Call forwarding, Home and away scenarios,
transfers, conferences, call control. Hands on
Analysing SIP supplementary services.
<li>SDP</li>
What is SDP? Multimedia, multimedia session
announcement, invitation and others. Relationship
with SIP. Hands on Video conferencing with SIP.
<li>SIP security</li>
Access control, Authentication, encryption,
firewalls. Hands on SIP authentication.
<li>Interoperability</li>
Inter working with PSTN, ISUP to SIP mapping,
SIP and 3G, SIP-T, SIP and SIGTRAN. SIP and
H323. Hands on SIP and gateways.
<li>SIP mobility</li>
Terminal mobility, service mobility, personal
mobility, Mobile IP, SIP signalling flows in 3G.


 </ul>

Definitive SIP for engineers

<h3>4G &amp; 5G Roaming Scenarios &amp; Procedures course description</h3>
 This course is designed to explain the roaming procedures of modern mobile networks, based on the GSMA roaming specification the course explains all scenarios where a mobile subscriber may find themselves whilst visiting a preferred mobile network partner.
 Interconnection between MNOs and the use of GRX &amp; IPX as an interworking process. The course will work through the registration &amp; authentication procedure, download of the user profile, the APN configuration &amp; DIAMETER process to verify user authenticity.
 VoLTE roaming and IMS registration procedures for voice support &amp; SMS delivery will be discussed and explained. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Architecture Models</li>
 <li>Technical requirements for interfaces - 4G Roaming Scenarios</li>
 <li>Technical requirements &amp; recommendations for services</li>
 <li>Other Technical Requirements &amp; Recommendations</li>
 <li>Technical Requirements for QoS support</li>
 <li>Technical Requirements &amp; Recommendations for Interfaces - 5G Scenarios</li>
 <li>Technical Requirements &amp; Recommendations for Interworking &amp; Coexistence with E-UTRAN &amp; EPC</li>
 <li>Technical Requirements &amp; Recommendations for Services</li>
 <li>Other Technical Requirements &amp; Recommendations</li>
 </ul>
 <h5>
 4G &amp; 5G Roaming Scenarios &amp; Procedures course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Those working in mobile networks.
 
							<li>Prerequisites:</li>
							
 None. 
 
							<li>Duration</li>
							
 3 days 
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>4G &amp; 5G Roaming Scenarios &amp; Procedures course contents</h3>
 
 <h5>Architecture Models</h5>
 <li>4G Evolved Packet System</li>
 <li>5G Core Network</li>
 <li>SGs Interface for CSFB&amp; SMS over SGs</li>
 
 
 <h5>Technical Requirements for Interfaces - 4G Roaming Scenarios</h5>
 <li>General requirements for inter-PLMN interfaces</li>
 <li>Stream Control Transmission Protocol (SCTP)</li>
 <li>IAMETER</li>
 <li>S8 Interface</li>
 <ol>
 <li>SGW selection</li>
 <li>PGW selection</li>
 </ol>
 <li>GTP</li>
 <li>Transport Layer engineering</li>
 <li>S9 interface</li>
 <ol>
 <li>Implementation requirements</li>
 <li>Guidelines for DIAMETER over S9</li>
 </ol>
 <li>S6a &amp; S6d interface</li>
 <li>Gy interface </li>
 <ol>
 <li>Guidelines for DIAMETER over Gy</li>
 </ol>
 <li>Legacy interworking scenarios</li>
 <ol>
 <li>VPLMN has not implemented LTE</li>
 <li>HPLMN has not implemented LTE</li>
 </ol>
 <li>Co-existence scenarios</li>
 <ol>
 <li>Possible scenarios</li>
 <ol>
 <li>2G/3G roaming agreement only</li>
 <li>2G/3G LTE roaming agreement</li>
 <li>LTE roaming registrations</li>
 </ol>
 </ol>
 <li>Consequences of different APN approaches when roaming</li>
 <ol>
 <li>Guidance regarding the APN approach when roaming</li>
 </ol>
 <li>Inter-RAT handover</li>
 <ol>
 <li>Handover &amp; access restrictions to/from 2G/3G &amp; LTE (Active mode)</li>
 <li>Access restriction for 2G/3G and/or LTE (Idle mode)</li>
 <li>Handover of PDN Connections between GERAN/UTRAN &amp; LTE</li>
 </ol>
 <li>Handover to/from non-3GPP accesses &amp; LTE</li>
 <li>Bandwidth considerations</li>
 <li>ARP considerations at handover from LTE to 2G/3G</li>
 
 
 <h5>Tech requirements &amp; recommendations for Services</h5>
 <li>SMS</li>
 <ol>
 
 <li>SMS over SGs</li>
 </ol>
 <li>Voice</li>
 <ol>
 <li>CSFB</li>
 <li>Roaming retry for CSFB</li>
 <li>Roaming Forwarding for CSFB </li>
 <li>Coexistence of Roaming Forwarding &amp; Roaming Retry</li>
 <li>Recommended procedures</li>
 </ol>
 <li>IMS Voice Roaming Architecture</li>
 
 
 <h5>Other Technical Requirements &amp; Recommendations</h5>
 <li>Access Control</li>
 <li>Addressing</li>
 <li>APN for IMS based services</li>
 <ol>
 <li>IMS Well Known APN</li>
 </ol>
 <li>APN for Home Operator Services</li>
 <ol>
 <li>Gateway Selection</li>
 <li>Inter-PLMN roaming handover</li>
 <li>Data off related functionality</li>
 </ol>
 <li>Emergency Services</li>
 <ol>
 <li>Emergency PDN connectivity</li>
 </ol>
 <li>Emergency Call indicator</li>
 <li>Security</li>
 <ol>
 <li>GTP Security</li>
 <li>DIAMETER Security</li>
 </ol>
 <li>DIAMTER Roaming hubbing</li>
 <li>Default APN</li>
 <li>E-UTRA NR Dual Connectivity with EPC</li>
 <ol>
 <li>GW Selection for E-UTRA-NR Dual Connectivity</li>
 </ol>
 <li>TAC/LAC Restriction Guidelines</li>
 
 
 <h5>Technical Requirements for QoS support</h5>
 <li>QoS parameters definition</li>
 <li>QoS Management in the Home Routed architecture</li>
 <li>QoS control for IMS APN in the S8HR architecture</li>
 <li>Support of QoS in GRX/IPX</li>
 <li>QoS Control in Local Breakout architecture</li>
 
 
 <h5>Technical Requirements &amp; Recommendations for Interfaces - 5G Scenarios</h5>
 <ol>
 <li>General requirements for inter-PLMN interfaces</li>
 <li>Transport protocol - TCP/IP</li>
 <li>Serialisation protocol - JSON</li>
 <li>Interface Definition language - OpenAPI</li>
 <li>Application Protocol - HTTP2</li>
 </ol>
 <li>Inter-PLMN (N32) Interface</li>
 <ol>
 <li>N32c</li>
 <li>N32f</li>
 <li>ALS &amp; IPX HTTP Proxy</li>
 </ol>
 <li>SMF &amp; UPF in HPLMN &amp; VPLMN</li>
 <li>Requirements related to Service Based Architecture</li>
 <li>Naming, addressing &amp; routing for 5G SA roaming</li>
 <ol>
 <li>SEPP load distribution</li>
 <li>SEPP administration, naming convention &amp; routing</li>
 <li>SEPP HTTP redirections</li>
 </ol>
 
 
 <h5>Technical Requirements &amp; Recommendations for Interworking &amp; Coexistence with E-UTRAN &amp; EPC</h5>
 <li>Interworking scenarios</li>
 <li>Coexistence scenarios</li>
 <li>Inter-RAT Handover</li>
 <li>Handover &amp; Access restriction between 5GC &amp; EPC</li>
 
 
 <h5>Technical Requirements &amp; Recommendations for Services</h5>
 <li>Network slicing</li>
 <li>Voice, Video &amp; Messaging</li>
 <li>Location support</li>
 <li>UE Route Selection Policy</li>
 
 
 <h5>Other Technical Requirements &amp; Recommendations</h5>
 <li>Access control</li>
 <li>IP Addressing</li>
 <li>DNN for IMS based services</li>
 <li>Emergency PDU Session</li>
 <li>Emergency Services Fallback</li>
 <li>Security</li>
 <li>Steering of Roaming in 5GS</li>
 
 
 <h5>Technical Requirements for QoS support</h5>
 <li>5G QoS model</li>
 <li>5G QoS profile</li>
 <li>QoS Control</li>

4G & 5G Roaming Scenarios & Procedures

This&nbsp;live virtual Business Agility Foundations (ICP-BAF) training &amp; certification program&nbsp;enables the participants to learn:1. How to Adapt to Business Needs: Participants gain the ability to quickly adapt to changing business requirements, ensuring they can effectively respond to market changes and challenges.2. Opportunity Identification Skills: Participants are equipped with the skills necessary to identify and leverage potential opportunities for enhancing business systems and delivering better business value.3. Transformation of Management Models: The program provides insights on how to transform traditional management and corporate governance models into modern frameworks that prioritize agility.4. Business Agility Mindset Building: It aims to cultivate a mindset focused on business agility, emphasizing the importance of agile principles in the context of business operations.5. Frameworks, Tools, and Techniques: Participants are introduced to various frameworks, tools, and techniques essential for implementing and maintaining business agility within an organization.6. Coverage of a Broad Range of Topics: The training covers a wide spectrum of topics, including Leadership, Lean System Thinking, Network Organization, Developing People, Managing Change, and Design Thinking. <ul fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li id="isPasted" fr-original-style="" style="box-sizing: border-box;">Leadership for Agility: Learn to lead with flexibility, fostering an environment where innovation thrives.</li><li id="isPasted" fr-original-style="" style="box-sizing: border-box;">Lean System Thinking: Understand how to streamline processes for maximum efficiency and value delivery.</li><li style="color: rgb(243, 121, 52); box-sizing: border-box;" fr-original-style="color: rgb(243, 121, 52);">Network Organization: Discover how to leverage the power of networked teams and communication for enhanced collaboration and results.</li><li fr-original-style="" style="box-sizing: border-box;">Developing People: Focus on building and nurturing a team capable of driving and sustaining agility.</li><li fr-original-style="" style="box-sizing: border-box;">Managing Change: Master the strategies for managing change effectively, ensuring your organization remains resilient and responsive.</li><li fr-original-style="" style="box-sizing: border-box;">Design Thinking: Embrace customer-centric problem solving to create solutions that genuinely meet user needs and stand out in the market.</li></ul></ul>7. The Blend of Theory and Practice: Through a combination of case studies and theoretical knowledge, the program prepares participants to apply their skills as effective agility practitioners in real-world business scenarios.8. Certification Achievement: Upon successful completion, participants are awarded the ICP-BAF certification, recognizing their understanding and capability to foster business agility.Bonus Module: Enhancing Business Agility with AI &amp; Analytics:&nbsp;This bonus section covers how artificial intelligence (AI) and analytics can boost business agility. It explains how these technologies simplify decision-making, automate tasks, and analyze data to improve agile practices. Participants will learn about the practical uses of AI and analytics in making businesses more innovative and efficient, with real-world examples from agile environments. This module offers insights into using AI and analytics to enhance the agility of businesses.This course will be delivered through live virtual sessions via Zoom.&nbsp;There are the following dates on which you can opt for this course:<ol fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 22-23 Apr | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 16-17 May | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 24-25 Jun | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 11-12 Jul | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 5-6 Aug | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 19-20 Sep | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 7-8 Oct | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 14-15 Nov | 9 am - 5 pm GMT | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="color: rgb(44, 130, 201); font-size: 14px; box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201); font-size: 14px;">Business Agility | 16-17 Dec | 9 am - 5 pm GMT | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li></ol><div fr-original-style="" style="box-sizing: border-box;"><a href="https://drive.google.com/file/d/1UNdZWuOt1Sh55xk0BPGUclog8GhCiuMm/view?usp=drive_link" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Click Here</a>&nbsp;or download the detailed course brochure via the following link to make an informed decision:</div><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><div fr-original-style="" style="box-sizing: border-box;"><a href="https://drive.google.com/file/d/1UNdZWuOt1Sh55xk0BPGUclog8GhCiuMm/view?usp=drive_link" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; color: inherit; cursor: pointer; text-decoration: inherit;">https://drive.google.com/file/d/1UNdZWuOt1Sh55xk0BPGUclog8GhCiuMm/view?usp=drive_link</a>&nbsp;</div></li></ul>

ValueX2

https://www.valuex2.com/icagile-business-agility-foundations-certification-training/
https://www.linkedin.com/company/80563537/

Business Agility Foundations (ICP-BAF) Training & Certification Program | 2 days - 8 hrs/day | 9 am - 5 pm UK Time

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Health & Safety

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Kent

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Dover

ECS Card Health & Safety Course Liverpool

ECS Card Health & Safety Course Newcastle

Edinburgh

Leicester

P600 provides delegates with the necessary skills and knowledge to improve their understanding of Performance Measurements in LEV.For many this will act as a starting point in their progression towards a career in LEV. &nbsp;P600 can be taken by newcomers to the field of LEV or by less experienced LEV personnel as part of their progression towards a Level 4 qualification, eg&nbsp;<a href="https://www.oxyl8.com/product/p601-thorough-examination-and-testing-of-local-exhaust-ventilation-lev-systems/" target="_blank" rel="noopener" style="color: rgb(10, 78, 112); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(10, 78, 112);">P601</a>&nbsp;&ndash;&nbsp;<a href="https://www.oxyl8.com/product/p604-performance-evaluation-and-management-of-local-exhaust-ventilation-systems/" target="_blank" rel="noopener" style="color: rgb(10, 78, 112); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(10, 78, 112);">P604</a>&nbsp;series). P600 is a Level 3 course.It does not confer &lsquo;competency&rsquo; on the delegate to allow them to undertake stutory examinations and tests under CoSHH Reg 9.In general terms &ndash; by attending this P600 delegates will gain knowledge and understanding of the:-<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Basic components of local exhaust ventilation systems.</li><li fr-original-style="" style="box-sizing: border-box;">Methodologies for undertaking the performance testing of LEV equipment</li><li fr-original-style="" style="box-sizing: border-box;">Qualitative visualisation techniques (smoke release/&rsquo;dust lamp&rsquo; etc).</li><li fr-original-style="" style="box-sizing: border-box;">Quantitative measurement techniques (anemometers, Pitot tubes etc).</li></ul>

OXYL8 Ltd

Energy Performance Certificate

Professional Skills Course (PSC)

Local Exhaust Ventilation (LEV)

FA Level 1

P600 is an introductory one-day LEV course

P600 LEV Methods for Testing Performance

P600 LEV 1 Day Course

Brightcore Consultancy delivers Senior Mental Health Lead training in schools and colleges which meets the Department for Education&rsquo;s quality criteria, and our course is in fact the highest rated of all the nationally DfE approved Senior Mental Health Lead training courses, scoring a perfect 5/5 in each of the 9 DfE quality assurance standards during the quality assurance process. It also has an incredible average delegate rating of 4.97 out of 5 for overall quality, with 100% of former delegates recommending the course (please see our many fantastic testimonials&nbsp;<a href="https://www.brightcoreconsultancy.com/brightcore-testimonials" target="_self" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">here</a>).The highly acclaimed Senior Mental Health Lead Training and Certificate is an extensive and authoritative training course that ensures schools/colleges have the most comprehensive, effective and financially viable whole-school/college approach to mental health and wellbeing in place. Since September 2021, this course has been fully funded by the DfE for eligible schools&nbsp;and colleges. Schools and Colleges that are ineligible for the grant are, of course, more than welcome to enrol on the course but will need to self-fund their place.Working with an&nbsp;expert trainer and a highly experienced Senior Mental Health Lead, who has&nbsp;trained Senior Mental Health Leads in over 1000 schools and colleges nationwide, you will be introduced to the DfE&rsquo;s requirements for the role of the DSMHL, and learn proven, long-term, evidence-based strategies to create, lead and promote a dynamic, bespoke mental health and wellbeing approach for your setting.<ul style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"><li fr-original-style="" style="box-sizing: border-box;">Our course consists of three days of live instructor-led training as well as an additional 1-2-1 review and coaching session, and costs&nbsp;&pound;520+VAT per delegate.&nbsp;(For schools and colleges who have already completed the training with us and now wish to train further colleagues, we offer a&nbsp;subsidised rate for additional delegates of &pound;390+VAT&nbsp;- please just email us if this is an offer you would like to take up.)</li><li fr-original-style="" style="box-sizing: border-box;">Places are limited to a maximum of 15 delegates per course to ensure high quality, bespoke training.</li><li fr-original-style="" style="box-sizing: border-box;">An overview of the course structure can be found&nbsp;<a href="https://www.brightcoreconsultancy.com/_files/ugd/5bc70a_c7b3efd99188442fa7d20449bb8fd0ec.pdf" target="_blank" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">here.</a></li></ul>Our Course is suitable for those who are new to the role of Senior Mental Health Lead or those who are looking to take on this role in the near future, and is designed to meet the DfE&rsquo;s&nbsp;<a href="https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/995681/Learning_outcomes_for_senior_mental_health_leads_in_schools_and_colleges.pdf" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">Learning Outcomes for Senior Mental Health Leads</a>&nbsp;by developing and supporting their knowledge and understanding of how to design, implement and sustain an effective whole school/college approach in accordance with the eight key principles as set out by Public Health England.<a href="https://www.brightcoreconsultancy.com/brightcore-testimonials" target="_blank" style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: rgb(255, 255, 255); font-weight: bold; text-decoration: none; border-radius: 5px; background-color: rgb(61, 86, 224); border-width: 12px 18px; border-style: solid; border-color: rgb(61, 86, 224); display: inline-block; user-select: auto; box-sizing: border-box; cursor: pointer;" rel="noopener noreferrer" fr-original-style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: #ffffff; font-weight: bold; text-decoration: none; border-radius: 5px; background-color: #3D56E0; border-top: 12px solid #3D56E0; border-bottom: 12px solid #3D56E0; border-right: 18px solid #3D56E0; border-left: 18px solid #3D56E0; display: inline-block;" fr-original-class="wysiwyg_bold_link_cls">View all testimonials </a>

Brightcore Consultancy delivers Senior Mental Health Lead training in schools and colleges which meets the Department for Education’s quality criteria, and our course is in fact the highest rated of all the nationally DfE approved Senior Mental Health Lead training courses, scoring a perfect 5/5 in each of the 9 DfE quality assurance standards during the quality assurance process. It also has an incredible average delegate rating of 4.97 out of 5 for overall quality, with 100% of former delegates recommending the course (please see our many fantastic testimonials here).
The highly acclaimed Senior Mental Health Lead Training and Certificate is an extensive and authoritative training course that ensures schools/colleges have the most comprehensive, effective and financially viable whole-school/college approach to mental health and wellbeing in place. Since September 2021, this course has been fully funded by the DfE for eligible schools and colleges. Schools and Colleges that are ineligible for the grant are, of course, more than welcome to enrol on the course but will need to self-fund their place.
Working with an expert trainer and a highly experienced Senior Mental Health Lead, who has trained Senior Mental Health Leads in over 1000 schools and colleges nationwide, you will be introduced to the DfE’s requirements for the role of the DSMHL, and learn proven, long-term, evidence-based strategies to create, lead and promote a dynamic, bespoke mental health and wellbeing approach for your setting.
Our course consists of three days of live instructor-led training as well as an additional 1-2-1 review and coaching session, and costs £520+VAT per delegate. (For schools and colleges who have already completed the training with us and now wish to train further colleagues, we offer a subsidised rate for additional delegates of £390+VAT - please just email us if this is an offer you would like to take up.)
Places are limited to a maximum of 15 delegates per course to ensure high quality, bespoke training.
An overview of the course structure can be found here.
Our Course is suitable for those who are new to the role of Senior Mental Health Lead or those who are looking to take on this role in the near future, and is designed to meet the DfE’s Learning Outcomes for Senior Mental Health Leads by developing and supporting their knowledge and understanding of how to design, implement and sustain an effective whole school/college approach in accordance with the eight key principles as set out by Public Health England.
View all testimonials



Brightcore Consultancy

Mental Health

Brightcore Consultancy delivers Senior Mental Health Lead training in schools and colleges which meets the Department for Education’s quality criteria, and our course is in fact the highest rated of all the nationally DfE approved Senior Mental Health Lead training courses, scoring a perfect 5/5 in each of the 9 DfE quality assurance standards during the quality assurance process.

Designated Senior Mental Health Lead Course (Three full days plus 1-2-1 session)

Bristol

Exeter

London

Newcastle

Manchester

Liverpool

Birmingham

<h1 id="isPasted" style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Online MHFA England Adult Mental Health First Aid Course.&nbsp;</h1><div fr-original-style="" style="box-sizing: border-box;"><a href="https://www.mindmapswellbeing.com/brochure-request/" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Download brochure for course details here.</a><a href="https://www.mindmapswellbeing.com/_webedit/uploaded-files/All%20Files/Online%20Mental%20Health%20First%20Aid.pdf" rel="noopener noreferrer" target="_blank" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">&nbsp;</a>&nbsp;</div><div fr-original-style="" style="box-sizing: border-box;"> </div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">This online version of the mental health first aid course will offer the same learning outcomes as the face to face training, and every person who completes the course will be certified as a Mental Health First Aider. &nbsp;The Online Mental Health First Aid course is a blended approach of individual learning and four instructor-led live sessions, hosted on a new Online Learning Hub. &nbsp;As a training course, Mental Health First Aid teaches people how to identify, understand and help someone who may be experiencing a mental health issue. The organisation&#39;s courses and resources also promote self-care as a vital way for people to help protect their mental health and prevent issues from getting worse. &nbsp;As with all our courses at Mindmaps Wellbeing, your course will be delivered by a Registered Mental Health Nurse, MHFA England Instructor and Open University Associate Lecturer and Practice Tutor experienced in remote teaching. Our live online learning will also include an assistant who is a MHFAider. &nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"> </div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Our fee is &pound;300pp Groups of 5+ contact <a href="mailto:info@mindmapswellbeing.com" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">info@mindmapswellbeing.com</a>&nbsp;for reduced group fees.&nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"> </div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Live instructor led sessions;&nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">10:00 &ndash; 12:30 &amp; 14:30 &ndash; 17:00 both days&nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Individual learning modules around these times. You will gain access to this on the Friday before your course start date.</div>Why choosing Mindmaps Wellbeing is a good choice for your training.The MHFA England RRP is &pound;325pp, our rate is &pound;300pp and our fee includes:✅ Instructor led training sessions over two days✅ Course Manual✅ Workbook✅ Handy Cue Card✅ MHFAider Certificate upon completionPlus, exclusively when you choose Mindmaps Wellbeing, it also includes:✅ Your instructors are Registered Mental Health Nurses and Healthcare Educators (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).✅ Access to our online MHFAider peer support groups moderated by the instructor team.✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.✅ Advanced Delegate Plan &ndash; This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.&nbsp;For a little extra:&nbsp;✅ Quarterly Facilitated MHFAider Forum &ndash; to provide ongoing expert support and guidance.&nbsp;✅ Organisational MINDWELL Companion tailored for your workplace / organisation.

Online MHFA England Adult Mental Health First Aid Course. 
Download brochure for course details here.  This online version of the mental health first aid course will offer the same learning outcomes as the face to face training, and every person who completes the course will be certified as a Mental Health First Aider. The Online Mental Health First Aid course is a blended approach of individual learning and four instructor-led live sessions, hosted on a new Online Learning Hub. As a training course, Mental Health First Aid teaches people how to identify, understand and help someone who may be experiencing a mental health issue. The organisation's courses and resources also promote self-care as a vital way for people to help protect their mental health and prevent issues from getting worse. As with all our courses at Mindmaps Wellbeing, your course will be delivered by a Registered Mental Health Nurse, MHFA England Instructor and Open University Associate Lecturer and Practice Tutor experienced in remote teaching. Our live online learning will also include an assistant who is a MHFAider. Our fee is £300pp Groups of 5+ contact info@mindmapswellbeing.com for reduced group fees. Live instructor led sessions; 10:00 – 12:30 & 14:30 – 17:00 both days Individual learning modules around these times. You will gain access to this on the Friday before your course start date.
Why choosing Mindmaps Wellbeing is a good choice for your training.
The MHFA England RRP is £325pp, our rate is £300pp and our fee includes:
✅ Instructor led training sessions over two days
✅ Course Manual
✅ Workbook
✅ Handy Cue Card
✅ MHFAider Certificate upon completion
Plus, exclusively when you choose Mindmaps Wellbeing, it also includes:
✅ Your instructors are Registered Mental Health Nurses and Healthcare Educators (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).
✅ Access to our online MHFAider peer support groups moderated by the instructor team.
✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.
✅ Advanced Delegate Plan – This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.
 
For a little extra: 
✅ Quarterly Facilitated MHFAider Forum – to provide ongoing expert support and guidance. 
✅ Organisational MINDWELL Companion tailored for your workplace / organisation.

Mindmaps Wellbeing

Health & Wellbeing

Occupational Health & Wellbeing

Accredited Mental Health First Aid

Mental Health At Work

Mental Health Nurse

Online MHFA England mental health first aid course delivered by Registered Mental Health Nurses from Mindmaps Wellbeing. 

Why choosing Mindmaps Wellbeing is a good choice for your mental health training.
The MHFA England RRP is £325pp, our rate is £300pp and our fee includes:
✅ Instructor led training sessions over two days 
✅ Course Manual
✅ Workbook
✅ Handy Cue Card
✅ MHFAider Certificate upon completion
Plus, exclusively when you choose Mindmaps Wellbeing, it also includes:

✅ Your instructors are Registered Mental Health Nurses and Healthcare Educators (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).

✅ Access to our online MHFAider peer support groups moderated by the instructor team.

✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.

✅ Advanced Delegate Plan – This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.

For a little extra: 

✅ Quarterly Facilitated MHFAider Forum – to provide ongoing expert support and guidance. 

✅ Organisational MINDWELL Companion tailored for your workplace / organisation.


MHFA England Mental Health First Aid

Safer recruitment training became mandatory for the recruitment of school staff from 1 January 2010. This means a recruitment panel must have at least one member who has completed the training, or where an individual is in charge of recruitment, that individual must have completed the training. It is the responsibility of schools to comply. It is recommended that anyone recruiting into the wider children&rsquo;s workforce be trained. This training is for Headteachers, Senior Leaders, Governors, Business Managers, HR professionals and for those who recruit workers and volunteers to work with children and young people. As a minimum at least one member of the interview panel should have had Safer Recruitment Training. All organisations in England that work with or provide services for children and families have a duty to protect their welfare.<a href="https://www.brightcoreconsultancy.com/brightcore-testimonials" target="_blank" style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: rgb(255, 255, 255); font-weight: bold; text-decoration: none; border-radius: 5px; background-color: rgb(61, 86, 224); border-width: 12px 18px; border-style: solid; border-color: rgb(61, 86, 224); display: inline-block; user-select: auto; box-sizing: border-box; cursor: pointer;" rel="noopener noreferrer" fr-original-style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: #ffffff; font-weight: bold; text-decoration: none; border-radius: 5px; background-color: #3D56E0; border-top: 12px solid #3D56E0; border-bottom: 12px solid #3D56E0; border-right: 18px solid #3D56E0; border-left: 18px solid #3D56E0; display: inline-block;">View all testimonials </a>

Safer recruitment training became mandatory for the recruitment of school staff from 1 January 2010. This means a recruitment panel must have at least one member who has completed the training, or where an individual is in charge of recruitment, that individual must have completed the training. It is the responsibility of schools to comply. It is recommended that anyone recruiting into the wider children’s workforce be trained.

This training is for Headteachers, Senior Leaders, Governors, Business Managers, HR professionals and for those who recruit workers and volunteers to work with children and young people. As a minimum at least one member of the interview panel should have had Safer Recruitment Training. All organisations in England that work with or provide services for children and families have a duty to protect their welfare.
View all testimonials

Recruitment

Safer Recruitment

Safer recruitment training became mandatory for the recruitment of school staff from 1 January 2010. This means a recruitment panel must have at least one member who has completed the training, or where an individual is in charge of recruitment, that individual must have completed the training. It is the responsibility of schools to comply. It is recommended that anyone recruiting into the wider children’s workforce be trained.

1308 Courses in Coventry

Definitive VoIP for engineers

By Systems & Network Training

LTE Architecture and Protocols

By Systems & Network Training

Total QoS for engineers

By Systems & Network Training

IP broadcast fundamentals

By Systems & Network Training

Introduction to the Junos Operating System

By Systems & Network Training

Definitive Segment Routing for engineers

By Systems & Network Training

Total IPv6 for engineers

By Systems & Network Training

Voice over LTE

By Systems & Network Training

Definitive SIP for engineers

By Systems & Network Training

4G & 5G Roaming Scenarios & Procedures

By Systems & Network Training

Search By Location