<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This intermediate to advanced level 3 full-day training course has been designed to provide participants with a detailed and up-to-date overview of the fluid mechanic fundamentals and operating practice of pumps, compressors and gas and steam turbines. Upon the successful completion of this course, participants will have acquired the practical knowledge to enable them not only to choose the correct device for a particular application but also be in a position to resolve many commonly occurring operating problems. Troubleshooting is an important part of this course and will cover the important topics of Machinery Root Cause Failure Analysis (RCFA) together with Vibration Analysis.</p>
<p>This course is ideal for those personnel in the oil, gas, petrochemical, chemical, power and other process industries who require a wider and deeper appreciation of pumps, compressors and turbines, including their design, performance and operation. The participants will be taken through an intensive primer of turbo-machinery principles, using the minimum of mathematics, and will learn how to solve the many and varied practical industrial problems that are encountered. The course makes use of an extensive collection of VIDEO material together with case studies and numerical exercises.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon the successful completion of this course, each participant will be able to:</p>
<ul>
<li>Apply a comprehensive knowledge of pumps, compressors &amp; turbines and troubleshoot rotating equipment in a professional manner</li>
<li>Identify the different types of turbomachinery including basic design aspects and highlighted problem areas</li>
<li>Minimise compressor work by understanding the processes involved and identifying their efficiency</li>
<li>Understand the flow through turbomachines and the corresponding velocity triangles including torque and power calculations</li>
<li>Analyse the different types of centrifugal machines including their design, installation, operation, maintenance, re-rate/retrofit, troubleshooting and control</li>
<li>Recognise the various beneficial design aspects of turbomachines and understand the crucial process of cavitation</li>
<li>Carry out proper methods of device installation, operation, maintenance and troubleshooting</li>
<li>Understand and apply the powerful methods of Machinery Root Cause Failure Analysis</li>
<li>Understand the various methods of vibration analysis applied to device diagnostics</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course provides an overview of all significant aspects and considerations of pumps, compressors and turbines for those who are involved in the design, selection, maintenance or troubleshooting of such equipment. This includes maintenance, reliability, integrity, engineering, production and operations managers, engineers and other technical staff.  </p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
<li>Advanced</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a Senior Mechanical &amp; Instrumentation Engineer (UK, B. Sc., M.Eng., Ph D) with over 45 years of industrial experience in Process Control &amp; Instrumentation, Pumps, Compressors, Turbines and Control Valve Technology.</p>
<p>He is currently a Senior Independent Consultant to various petrochemical industries in the UK, USA, Oman, Kuwait and KSA where he provides consultancy services on both the application and operational constraints of process equipment in the oil &amp; gas industries.</p>
<p>During his early career, he held key positions in Rolls Royce (UK) where he was involved in the design of turbine blading for jet engines, subject to pre-specified distributions of pressure. During this period and since, he has also been closely involved in various aspects of Turbomachinery, Thermodynamics and Fluid Mechanics where he has become a recognised authority in these areas.</p>
<p>Later, he joined the academic staff of University of Liverpool in the UK as a Professor in Mechanical Engineering Courses. A substantial part of his work has been concerned with detailed aspects of Flowmetering - both of single &amp; multiphase flows. He has supervised doctoral research students in this area in collaboration with various European flowmeter manufacturers.</p>
<p>He joined Haward Technology Middle East in 2002 and was later appointed as European Manager (a post which has since lapsed) and has delivered over 150 training courses in Flowmeasurement (single- and multi-phase), Control, Heat Exchangers, Pumps, Turbines, Compressors, Valve and Valve Selection as well as other topics throughout the UK, USA, Oman and Kuwait. During the last two years, he has delivered courses with other training companies operating in the Far and Middle East. He has published about 150 papers in various Engineering Journals and International Conferences and has contributed to textbooks on the topics listed above.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Pumps, Compressors, Turbines & Troubleshooting

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This course will begin with a presentation of topics to familiarize Process and Instrumentation Engineers with procedures and practices involved in the choice of sensors related to the measurement of temperature, pressure, level and flow in relation to single-phase flows. It will provide guidance on the optimum commercially available devices through a detailed comparison of their relative merits. At the heart of this course is sensor calibration which is a crucial element for these topics.</p>
<p>The course will also examine the various types of flow control valve, including Globe, Slide, Needle, Eccentric plug and Ball valves and their characteristics in industrial application, while focusing on the problems of Cavitation and Flashing and methods to minimise or eradicate these issues. With the use of examples, industry case studies and a wide range of videos, this course will also cover all aspects of proportional (P), derivative (D) and integral (I) control. In particular, it will address the advantages and disadvantages of PI and PID control. It will also describe Cascade, Feed forward, Split Range, Override and Ratio Control techniques.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By attending this course, participants will acquire the following knowledge and skills:</p>
<ol>
<li>Apply an in-depth knowledge to the measurement of temperature, pressure, level and flow as well as to the fluid mechanics of pipe flows</li>
<li>Assess the advantages and disadvantages of the major flowmeter types including the differential pressure, rotary positive displacement, rotary-inferential, electromagnetic, ultrasonic and Coriolis mass flowmeters to determine the optimum choice for a given application</li>
<li>Make a considered judgement of the choice of fluid level measurement devices</li>
<li>Understand the various types of flow calibration, metering systems and provers</li>
<li>Carry out tank measurement and tank calibration methods and to calculate net sellable quantities</li>
<li>Discuss valve characteristics &amp; trim selection and illustrate the process of control valve sizing</li>
<li>Explain the terms Open and Closed loop</li>
<li>Define Process Variable, Measured Variable, Set Point and Error</li>
<li>Define Direct and Reverse controller actions</li>
<li>Explain the terms Process Lag, Measurement Lag, Transmission Lag, and Response Lag and their effect on controllability</li>
<li>Explain ON/ OFF Control and the inherent disadvantages</li>
<li>Explain Proportional Control, Offset, Gain and Proportional Band and the advantages and disadvantages of Proportional only control</li>
<li>Explain the fundamentals and operation principles of Integral (I) Action and the disadvantages of proportional plus integral control</li>
<li>Explain the fundamentals and operation principles of Derivative (D) Action in conjunction with P action</li>
<li>Describe the operating principles of a PID Controller and explain the applications and advantages of PID control</li>
<li>Describe Cascade, Forward, Split Range and Ratio Control operation principles</li>
</ol>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course will benefit <strong>instrumentation, inspection, control, custody metering and process engineers and other technical staff</strong>. It is also suitable for <strong>piping engineers, pipelines engineers, mechanical engineers, operations engineers, maintenance engineers, plant/field supervisors and foremen and loss control coordinators</strong>.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a Senior Mechanical &amp; Instrumentation Engineer (UK, B. Sc., M.Eng., Ph D) with over 45 years of industrial experience in Process Control &amp; Instrumentation, Pumps, Compressors, Turbines and Control Valve Technology. He is currently a Senior Independent Consultant to various petrochemical industries in the UK, USA, Oman, Kuwait and KSA where he provides consultancy services on both the application and operational constraints of process equipment in the oil &amp; gas industries.</p>
<p>During his early career, he held key positions in Rolls Royce (UK) where he was involved in the design of turbine blading for jet engines, subject to pre-specified distributions of pressure. During this period and since, he has also been closely involved in various aspects of Turbomachinery, Thermodynamics and Fluid Mechanics where he has become a recognised authority in these areas.</p>
<p>Later, he joined the academic staff of University of Liverpool in the UK as a Professor in Mechanical Engineering Courses. A substantial part of his work has been concerned with detailed aspects of Flowmetering - both of single &amp; multiphase flows. He has supervised doctoral research students in this area in collaboration with various European flowmeter manufacturers.</p>
<p>He joined Haward Technology Middle East in 2002 and was later appointed as European Manager (a post which has since lapsed) and has delivered over 150 training courses in Flowmeasurement (single- and multi-phase), Control, Heat Exchangers, Pumps, Turbines, Compressors, Valve and Valve Selection as well as other topics throughout the UK, USA, Oman and Kuwait. During the last two years, he has delivered courses with other training companies operating in the Far and Middle East.</p>
<p>He has published about 150 papers in various Engineering Journals and International Conferences and has contributed to textbooks on the topics listed above.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Process Control and Instrumentation

Liverpool

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">We run regular Certified NLP Practitioner and Master Practitioner training for small groups in Liverpool or at your premises nationwide.&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">1 to 1 coaching and short courses for businesses are by arrangement. Call us to discuss.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Our <a href="https://www.nlpliverpool.com/index.html" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">website</a> always contains up-to-date course information and we encourage you to call us to discuss your exact requirements. We are happy to adapt course content and work to your time and budget constraints.</p>

2 Educators providing Courses in Cardiff

liverpool boys high school alumni

Liverpool

hope for nigeria

London

Courses matching "Liverpool"

Pumps, Compressors, Turbines & Troubleshooting

By EnergyEdge - Training for a Sustainable Energy Future

Process Control and Instrumentation

By EnergyEdge - Training for a Sustainable Energy Future

Certified NLP Training and Business Coaching

By NLP Liverpool Ltd

Search By Location