Name: Network fundamentals for engineers
Price: 2297 GBP
Availability: InStock

Redhill

<h3>Essential 5G training course description</h3>
 This course is designed to give delegates an
explanation of the technologies and interworking
requirements of the next generation of cellular
communications.
It is not a definitive set of descriptions but a possibility
of the final deployment. we will investigate the 10 pillars
for 5G which will include various Radio Access
Technologies that are required to interwork smoothly.
We will look at the 4G Pro features and other RATs.
 
				<h5>What will you learn</h5>
				<ul>
				 
			
 <li>List the ten pillars of 5G deployment.</li>
 <li>Describe the 5G Internet.</li>
 <li>Explain virtualization and RAT virtulization.</li>
 <li>Describe Software Defined Networks (SDN).</li>
																				<li>Explain carrier aggregation.</li>
 <li>Describe the mobile cloud.</li>
																				<li>Explain an overall picture of 5G architecture.</li>
 </ul>
 <h5>
 Essential 5G training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone looking for an understanding of the technologies
and interworking requirements of the next generation of
cellular communications.
 
							<li>Prerequisites:</li>
							
 None.
							
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Essential 5G training course contents</h3>
 <ul>
				<li>Drivers for 5G </li>
5G Road Map, 10 Pillars of 5G, evolving RATs, oSON, MTCm, mm-wave, backhaul, EE, new spectrum, spectrum sharing, RAN virtualisation.

<li>4G LTE Advanced </li>
MIMO technology in release 8, Downlink &amp; uplink MIMO R8, MIMO technology in LTE advanced, Downlink 8-layer SU-MIMO, Downlink MU-MIMO, Uplink MU-MIMO, Uplink transmit diversity, Coordinated multi-point operation (CoMP), Independent eNB &amp; remote base station configurations, Downlink CoMP.

<li>ICIC &amp; eICIC </li>
ICIC, Homogeneous to heterogeneous network evolution, Introduction to eICIC, Macro-pico scenario, Macro-femto scenario, Time orthogonal frequencies. Almost Blank Subframe (ABS).

<li>Carrier aggregation </li>
Component carriers (CC), CC aggregation deployments, Intra-band contiguous solutions, Intra-band non-contiguous solutions, Inter-band non-contiguous solutions, CA bandwidth classes, Aggregated transmission bandwidth configurations (ATBC), Possible carrier aggregation configs.

<li>eIMTA </li>
TDD UL-DL reconfig. for traffic adaptation, Reconfig. mechanisms, Interference mitigation schemes, Dynamic &amp; flexible resource allocation.

<li>5G architectures </li>
5G in Europe, horizon 2020 framework, 5G infrastructure PPP, METIS project, 5G in North America, academy research, company R&amp;D, 5G specifications.

<li>The 5G internet </li>
High-level view of Cloud Services, The Internet of Things &amp; context awareness, Network reconfiguration &amp; virtualization support, server proliferation, how VMs fix underutilised server problem, enter the hypervisor, why are VM such a big deal? SDN, evolution of the data centre network, high availability, low latency, scalability, security, cost model explodes, service-oriented API. OpenFlow switches, OpenFlow controllers, how SDN works. The big picture, pulling it all together, why the network had to change, how SDN &amp; NFV tie together. Evolutionary approach to the internet, architectures for distributed mobility management, MEDIEVAL &amp; MEDIVO projects, a clean slate approach, mobility first architecture. VNet, INM, NetInf, ForMux, MEEM. Generic Path (GP) &amp; anchorless mobility (AM), Quality of Service support, network resource provisioning, resourcing inside a network. IntServ, RSVP, DiffServ, CoS. Emerging approach for resource over- provisioning, example use case architecture for scalable resource control scenarios in the 5G internet. Integrating SDN/NFV for efficient resource over-reservation control, control information repository, service admission control policies, network resource provisioning, control enforcement functions, network configurations &amp; operations.

<li>Small cells for 5G </li>
Average spectral efficiency evolution, WiFi &amp; Femto cells, Capacity limits. Achievable gains with densifications, multi-antenna techniques, small cells. Mobile data demand, approach &amp; methodology, subscriber density and traffic demand projections to 2020. Demand versus capacity, global mobile data traffic increase modelling, country level backhaul traffic projections, Small cell challenges, backhaul, spectrum, automation.

<li>Cooperation for next gen wireless networks </li>
Diversity &amp; relaying strategies, cooperation &amp; network coding, ARQ &amp; MAC protocols, NCCARQ &amp; PRCSMA packet exchange, Physical layer impact on MAC protocol analysis, NCCARQ overview, PHY layer impact, Case study on NCCARQ.

<li>Mobile clouds </li>
Mobile cloud, Mobile cloud enablers, mobile user domain, wireless technologies, WWAN WLAN and WPAN range, Bluetooth, IEEE.802.15.4 &amp; software stacks, infrared, near field communications (NFC). Network coding, store &amp; forward vs compute &amp; forward, linear network coding, random linear coding.

<li>Security for 5G communications </li>
Potential 5G communication systems architectures, Security issues &amp; challenges. Mobile malware attacks targeting the UE, 5G mobile botnets, access networks, attacks on 4G networks, C-RNTI &amp; packet sequence number based UE location tracking, false buffer status reports attacks, message insertion attacks, HeNB attacks, physical attacks, credential attacks, configuration and protocol attacks, attacks on MON, user data &amp; identity attacks, mobile operator's core network, DDoS attacks targeting MON, signalling amplification, HSS saturation, external IP networks.
 </ul>

Systems & Network Training

Network & Security

Network Engineer

Essential 5G

General Admission

<h3>Complete JavaScript training course description</h3>
 A hands on course covering JavaScript programming.
Core JavaScript is covered first, including the basics,
arrays, functions, classes, modules and Regular
expressions. Client side JavaScript is then covered
including JavaScript in browsers, Scripting CSS, the
jQuery library and HTML APIs.
 
				<h5>What will you learn</h5>
				<ul>
				 
	 
 
 <li>Read JavaScript.</li>
				 	 <li>Write JavaScript.</li>
 <li>Debug JavaScript.</li>
 </ul>
 <h5>
 Complete JavaScript training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone wishing to learn JavaScript.
 
							<li>Prerequisites:</li>
							
 None.
							
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Complete JavaScript training course contents</h3>
 <ul>
				<li>CORE JAVASCRIPT </li>
<li>Lexical structure: </li>
Character set, comments, literals, identifiers, and reserved words, optional semicolons..

<li>Types, values and variables: </li>
Numbers, text, boolean values, null and undefines, the global object, wrapper objects, immutable primitive values and mutable object references, type conversions, variable declaration, variable scope.

<li>Expressions and operators: </li>
Primary expressions, object and array initializers, function definition expressions, property access expressions, invocation expressions, object creation expressions, operator overview, arithmetic expressions, relational expressions, logical expressions, assignment expressions, evaluation expressions, miscellaneous operators.

<li>Statements: </li>
Expression statements, compound and empty statements, declaration statements, conditionals, loops, jumps, miscellaneous statements, summary of JavaScript statements.

<li>Objects: </li>
Creating objects, querying and setting properties, deleting properties, testing properties, enumerating properties, property getters and setters, property attributes, object attributes, serializing objects, object methods.

<li>Arrays: </li>
Creating arrays, reading and writing array elements, sparse arrays, array length, adding and deleting array elements, iterating arrays, multi-dimensional arrays, array methods, FCMAScript 5 array methods, array type, array-like objects, strings as arrays.

<li>Functions: </li>
Defining functions, invoking functions, function arguments and parameters, functions as values, functions as namespaces, closures, function properties, methods and constructor, functional programming.

<li>Classes and modules: </li>
Classes and prototypes, classes and constructors, Java-style classes in JavaScript, augmenting classes, classes and types, object oriented techniques in JavaScript, subclasses, classes in ECMAScript 5, modules.

<li>Pattern matching and regular expressions: </li>
Defining regular expressions, string methods for pattern matching, the RegExp object.

<li>JavaScript subsets and extensions: </li>
JavaScript subsets, constants and scoped variables, destructuring assignment, iteration, shorthand functions, multiple catch clauses, E4X: ECMAScript for XML.

<li>Server-side JavaScript: </li>
Scripting Java with Rhino, asynchronous I/O with node.


<li>CLIENT SIDE JAVASCRIPT </li>
<li>JavaScript in web browsers:</li>
Client side JavaScript, embedding JavaScript in HTML, execution of JavaScript programs, compatibility and interoperability, accessibility, security, client side frameworks.

<li>The Window object: </li>
Timers, browser location and navigation, browsing history, browser screen information, dialog boxes, error handling, document elements as window properties, multiple windows and frames.

<li>Scripting Documents: </li>
Overview of the DOM, selecting document elements, document structure and traversal, attributes, element content, creating, inserting and deleting nodes. Example: generating a table of contents, document and element geometry and scrolling, HTML forms, other document features.

<li>Scripting CSS: </li>
Overview of CSS, important CSS properties, scripting inline styles, querying computed styles, scripting CSS classes, scripting stylesheets.

<li>Handling events: </li>
Types of events, registering event handlers, event handler invocation, document load events, mouse events, mousewheel events, drag and drop events, text events, keyboard events.

<li>Scripted HTTP: </li>
Using XMLHttpRequest, HTTP by &lt;script&gt;: JSOMP, Comet with server-sent events.

<li>The jQuery library: </li>
jQuery basics, jQuery getters and setters, altering document structure, handling events with jQuery, Animated effects, Ajax with jQuery, Utility functions, jQuery selectors and selection methods, Extending jQuery with plug-ins. The jQuery UI library. Client side storage: localStorage and sessionStorage, Cookies, IE usingData persistence, Applicatioin storage and offline webapps.

<li>Scripted media and graphics: </li>
Scripting images, Scripting audio and video, SCG:scalable vector graphics, Graphics in a &lt;canvas&gt;.

<li>Scripted HTTP: </li>
Using XMLHttpRequest, HTTP by &lt;script&gt;: JSOMP, Comet with server-sent events.

<li>The jQuery library: </li>
jQuery basics, jQuery getters and setters, altering document structure, handling events with jQuery, Animated effects, Ajax with jQuery, Utility functions, jQuery selectors and selection methods, Extending jQuery with plug-ins. The jQuery UI library.

<li>Client side storage: </li>
localStorage and sessionStorage, Cookies, IE usingData persistence, Applicatioin storage and offline webapps.

<li>Scripted media and graphics: </li>
Scripting images, Scripting audio and video, SCG:scalable vector graphics, Graphics in a &lt;canvas&gt;.

<li>HTMLS APIs: </li>
Geolocation, history management, cross-origin messaging, web workers, type arrays and ArrayBuffers, blobs, the filesystem API, client side databases, web sockets.
			
 </ul>

Complete JavaScript

Aberdeen

Castleford

Exeter

Glasgow

Heathrow

Manchester

Middlesbrough

Rainham

Southampton

Wellingborough

This course is designed to provide delegates that need to use abrasive wheels &nbsp;with an in-depth understanding of the requirements of the law, associated regulations and safe working practices when using abrasive wheels.Book via our website @&nbsp;<a href="https://www.vp-ess.com/training/workplace-safety/abrasive-wheels/" id="isPasted" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ESS | Training Courses | Vp ESS (vp-ess.com)</a>

This course is designed to provide delegates that need to use abrasive wheels with an in-depth understanding of the requirements of the law, associated regulations and safe working practices when using abrasive wheels.
Book via our website @ ESS | Training Courses | Vp ESS (vp-ess.com)
or via email at: esstrainingsales@vpplc.com
or phone on: 0800 000 346

Vp ESS Training

Construction Safety

Risk Management

Health & Safety

Health & Safety At Work

Safety Awareness

This course is designed to provide delegates that need to use abrasive wheels  with an in-depth understanding of the requirements of the law, associated regulations and safe working practices when using abrasive wheels.

Book via our website @ ESS | Training Courses | Vp ESS (vp-ess.com)

or via email at: esstrainingsales@vpplc.com

or phone on: 0800 000 346


Abrasive wheels

General admission

<div>
</div>
<section>
<div>
<h2>About this Training Course</h2>
This course will begin with a presentation of topics to familiarize Process and Instrumentation Engineers with procedures and practices involved in the choice of sensors related to the measurement of temperature, pressure, level and flow in relation to single-phase flows. It will provide guidance on the optimum commercially available devices through a detailed comparison of their relative merits. At the heart of this course is sensor calibration which is a crucial element for these topics.
The course will also examine the various types of flow control valve, including Globe, Slide, Needle, Eccentric plug and Ball valves and their characteristics in industrial application, while focusing on the problems of Cavitation and Flashing and methods to minimise or eradicate these issues. With the use of examples, industry case studies and a wide range of videos, this course will also cover all aspects of proportional (P), derivative (D) and integral (I) control. In particular, it will address the advantages and disadvantages of PI and PID control. It will also describe Cascade, Feed forward, Split Range, Override and Ratio Control techniques.
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
By attending this course, participants will acquire the following knowledge and skills:
<ol>
<li>Apply an in-depth knowledge to the measurement of temperature, pressure, level and flow as well as to the fluid mechanics of pipe flows</li>
<li>Assess the advantages and disadvantages of the major flowmeter types including the differential pressure, rotary positive displacement, rotary-inferential, electromagnetic, ultrasonic and Coriolis mass flowmeters to determine the optimum choice for a given application</li>
<li>Make a considered judgement of the choice of fluid level measurement devices</li>
<li>Understand the various types of flow calibration, metering systems and provers</li>
<li>Carry out tank measurement and tank calibration methods and to calculate net sellable quantities</li>
<li>Discuss valve characteristics &amp; trim selection and illustrate the process of control valve sizing</li>
<li>Explain the terms Open and Closed loop</li>
<li>Define Process Variable, Measured Variable, Set Point and Error</li>
<li>Define Direct and Reverse controller actions</li>
<li>Explain the terms Process Lag, Measurement Lag, Transmission Lag, and Response Lag and their effect on controllability</li>
<li>Explain ON/ OFF Control and the inherent disadvantages</li>
<li>Explain Proportional Control, Offset, Gain and Proportional Band and the advantages and disadvantages of Proportional only control</li>
<li>Explain the fundamentals and operation principles of Integral (I) Action and the disadvantages of proportional plus integral control</li>
<li>Explain the fundamentals and operation principles of Derivative (D) Action in conjunction with P action</li>
<li>Describe the operating principles of a PID Controller and explain the applications and advantages of PID control</li>
<li>Describe Cascade, Forward, Split Range and Ratio Control operation principles</li>
</ol>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
This course will benefit instrumentation, inspection, control, custody metering and process engineers and other technical staff. It is also suitable for piping engineers, pipelines engineers, mechanical engineers, operations engineers, maintenance engineers, plant/field supervisors and foremen and loss control coordinators.
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
Your expert course leader is a Senior Mechanical &amp; Instrumentation Engineer (UK, B. Sc., M.Eng., Ph D) with over 45 years of industrial experience in Process Control &amp; Instrumentation, Pumps, Compressors, Turbines and Control Valve Technology. He is currently a Senior Independent Consultant to various petrochemical industries in the UK, USA, Oman, Kuwait and KSA where he provides consultancy services on both the application and operational constraints of process equipment in the oil &amp; gas industries.
During his early career, he held key positions in Rolls Royce (UK) where he was involved in the design of turbine blading for jet engines, subject to pre-specified distributions of pressure. During this period and since, he has also been closely involved in various aspects of Turbomachinery, Thermodynamics and Fluid Mechanics where he has become a recognised authority in these areas.
Later, he joined the academic staff of University of Liverpool in the UK as a Professor in Mechanical Engineering Courses. A substantial part of his work has been concerned with detailed aspects of Flowmetering - both of single &amp; multiphase flows. He has supervised doctoral research students in this area in collaboration with various European flowmeter manufacturers.
He joined Haward Technology Middle East in 2002 and was later appointed as European Manager (a post which has since lapsed) and has delivered over 150 training courses in Flowmeasurement (single- and multi-phase), Control, Heat Exchangers, Pumps, Turbines, Compressors, Valve and Valve Selection as well as other topics throughout the UK, USA, Oman and Kuwait. During the last two years, he has delivered courses with other training companies operating in the Far and Middle East.
He has published about 150 papers in various Engineering Journals and International Conferences and has contributed to textbooks on the topics listed above.
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. 
Request for further information post training support and fees applicable
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
 </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Process Control and Instrumentation

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2>About this Virtual Instructor Led Training (VILT)</h2>
Preventive and Predictive maintenance are not new concepts. Both have been used across industry all over the world and when done properly, can yield impressive results (cost reductions of 20% or greater and a leap forward in equipment reliability and performance are very achievable). However, for every company using these concepts effectively, there are many others who are not.
This 8 half-day Virtual Instructor Led Training (VILT) course has been derived from the Plant Performance Improvement Road Map developed by practitioners that guarantee the reliability of your operations. The VILT training focuses on how to improve profitability of any business by identifying the right maintenance strategy for any equipment. The aim of the VILT training is to help practitioners run programmes that will deliver real benefits as fast as possible with minimum zero wasted effort. The VILT training will also cover the core principles of Reliability Centred Maintenance, Total Productive Maintenance and Six Sigma and the increasingly important role of operations in achieving optimised asset performance.
This is a certified course with the option of sitting for a short exam on the final day of the course to give participants the opportunity to gain a Certificate from petroEDGE and the Carcharodon Maintenance Academy.
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
Master the critical skills by acquiring the following:
<ul>
<li>An understanding of how maintenance can add profit</li>
<li>The ability to develop improvement programmes that deliver maximum benefit in the shortest time</li>
<li>A fundamental understanding of the principles of Preventive, Predictive and other maintenance types</li>
<li>A practical understanding of the latest methods of solving problems at root cause level</li>
<li>An appreciation of maintenance methodologies such as Reliability Centred Maintenance</li>
<li>Strategies for ensuring your company gets value for money from your Contractors</li>
<li>How to use the Maintenance Model of Excellence and Plant Performance Improvement Road Map</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
This VILT course has been designed for maintenance managers and engineers, reliability professionals, planners, project engineers, operations team members, and functional specialists.
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
The VILT course will be delivered online in 8 half-day sessions comprising 4 hours per day, with 2 breaks of 10 minutes per day.
Course Duration: 8 half-day sessions, 4 hours per session (32 hours in total).
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
Your expert course leader is an award-winning consultant and trainer with 30 years' experience in maintenance and reliability improvement. He has worked across five continents, in a wide variety of environments from the world's largest oil refinery to a small drinks production line. He has 10 years of maintenance management experience in the process industry, so he brings a very practical approach to training. He moved into consulting with ABB Eutech as their global maintenance specialist where he led maintenance and reliability best practice panels, delivered a wide range of maintenance improvement projects and trained other consultants. He is a fully qualified CMRP professional, an approved SMRP* Proctor, authorised to conduct CMRP exams and a globally respected maintenance consultant and best practice trainer.
He founded his consultancy and training business in 2002 to focus on maintenance and reliability improvement. As part of this, he developed a range of maintenance 'models of excellence' with inputs from authors, international lecturers and some of the world's leading consultants and operators. His work has been recognised as being at the leading edge of industry best practice, winning independent awards such as the UK Chemical Industries Association 'Excellence in Engineering' award.
He remains close to the industry as a respected specialist helping operating companies to achieve changes in performance. This ongoing field work enables him to continue to refine and extend best practice and the learning from this is continually fed into his training.
His unique experience of facilitating two major turnarounds when the Coronavirus escalated into lockdown have given him a unique insight into how events of this type can disrupt maintenance. Moreover, his involvement in developing management processes and leading a Coronavirus response on a major industrial asset means he can talk with direct experience about how to cope and innovate in this global pandemic.
*SMRP refers to Society of Maintenance and Reliability Professionals. PetroEdge is not affiliated with SMRP
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. 
Request for further information about post training coaching support and fees applicable for this.
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
 </div>
</div>
</div>
</div>
</section>

Preventive and Predictive Maintenance

London

Wharf Approach

Optima Electrical Training

If you have at least 5 years working experience and you would like to attain Gold Card status via the Experienced Worker route by joining the City & Guilds 2346 NVQ Level 3, you will also need to hold the below two pre-requisite qualifications:

City & Guilds 2391-52 Inspection and Testing Course

C&G 2382-22 BS7671 18th Edition

Pre-Experienced Worker Route Package

Pre-Experienced Worker Package: C&G 2391-52 & 18th Edition

This course is aimed at anyone who has to undertake manual handling duties as part of their work routine, and will give the delegates a basic understanding of the correct manual handling techniques when moving, handling and lifting of loads.Book via our website @&nbsp;<a href="https://www.vp-ess.com/training/workplace-safety/manual-handling-awareness/" id="isPasted" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ESS | Training Courses | Vp ESS (vp-ess.com)</a>

This course is aimed at anyone who has to undertake manual handling duties as part of their work routine, and will give the delegates a basic understanding of the correct manual handling techniques when moving, handling and lifting of loads.
Book via our website @ ESS | Training Courses | Vp ESS (vp-ess.com)
or via email at: esstrainingsales@vpplc.com
or phone on: 0800 000 346

Manual Handling

Lifting

This course is aimed at anyone who has to undertake manual handling duties as part of their work routine, and will give the delegates a basic understanding of the correct manual handling techniques when moving, handling and lifting of loads.

Book via our website @ ESS | Training Courses | Vp ESS (vp-ess.com)

or via email at: esstrainingsales@vpplc.com

or phone on: 0800 000 346


Manual Handling Awareness

<h3>LINX 1 training course description</h3>
 An intensive hands on IP foundation leading to LINX
Accredited Internet Technician stage 1. The course
focuses on all parts of TCP/IP including layers 4 to 7 on
end stations as well as layer 3 on routers. The TCP/IP
protocols are also studied to enable delegates to be
able to troubleshoot TCP/IP using Wireshark. Hands on
sessions are used to reinforce the theory rather than
teach specific manufacturer equipment. 
 A multiple choice exam, leading to the LAIT I
certification, is available after the course. The exam
consists of 40 questions and lasts 1.5 hours. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Use ping, traceroute and other tools to diagnose
 faults on a network.</li>
 <li>Configure IP on PCs and routers.</li>
 <li>Plan IP addresses and subnets.</li>
 <li>Analyse IP and TCP packets using an analyser.</li>
 <li>Troubleshoot TCP/IP.</li>
 </ul>
 <h5>
 LINX 1 training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Network engineers.
 
							<li>Prerequisites:</li>
							
 None. 
 
							<li>Duration</li>
							
 5 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>LINX 1 training course contents</h3>
 <ul>
 <li>What is TCP/IP?</li> 
TCP and IP are protocols, 7 layer model, network
layers, hardware/software layers, internetworking,
protocols, What is IP? What is TCP? The internet,
The IAB, RFCs.<li>
		 
		 Ping and Wireshark</li> 
		 Host configuration, IP addresses, subnet masks,
default gateways, ping. 
		 Hands on Base configuration. Testing
 with ping. Analysing packets with Wireshark.
		 
 <li>Switches and Wireshark</li>
Switches versus hubs, layer 2 forwarding table,
flooding, broadcasts. Hands on Building a
switched based network.
<li>Configuring network devices</li>
Configuration options, console port, putty, telnet.
 Hands on Configuring switches, telnet.
<li>IP</li>
IP packet format, protocol field, TTL, DiffServ,
fragments, ICMP. Hands on IP packet analysis.
<li>IP addressing</li>
32 bits, dotted decimal, rules, networks, role of
subnet masks, simple subnetting, prefix notation.
Broadcasts, special use addresses. Hands on
Planning and implementing addressing.
<li>IP and the lower layers</li>
ARP, media not supporting ARP. Hands on ARP.
<li>Routing</li>
What are routers? What routers do, default
gateways, routing and addressing, routing tables,
ways to update routing tables. Hands on Building
a routed network, traceroute.
<li>Routing protocols</li>
IGPs and EGPs, RIP, RIPv2, Why not to use RIP,
OSPF, OSPF metrics, convergence, distance
vector protocols, link state protocols. Hands on
OSPF, analysing routing tables, loopbacks.
<li>Network simulators</li>
Network simulators, EVE-NG, GNS3, CML. Hands on Using EVE-NG.
<li>Subnetting</li>
Subnetting to the bit level, ranges, how prefixes
are used. Hands on Subnetting.
<li>VLANS and IP addressing</li>
What are VLANs, tagging, 802.1Q, Inter VLAN
routing. Hands on Inter VLAN routing.
<li>TCP and UDP</li>
Layer 4, port numbers, client ports, broadcasts
multicasts and layer 4, UDP header, TCP header,
connections, ACK, sliding windows, options,
connection states. Sockets. Hands on Analysing
TCP packets.
<li>IPv4 address configuration</li>
Private addresses, NAT, NAPT, dynamic
addressing, DHCP, link local addresses. Hands on DHCP, NAT.
<li>IPv6</li>
What is IPv6, 128 bit addresses, address formats,
IPv6 address allocation, header format, migration,
dual stack, tunnelling, NAT64, DNS64. Hands on
IPv6 setup troubleshooting.
<li>IPv6 address configuration</li>
Static addressing, EUI-64 addresses, IPv6
address order, SLAAC, DHCPv6. Hands on
SLAAC.
<li>Applications</li>
Clients, servers, HTTP, Email, resource sharing,
VoIP, video, terminal emulation, remote desktop.
Network management and SNMP. Hands on
Servers, TFTP, VoIP packet analysis.
<li>DNS</li>
Names and addresses, hosts file, how DNS
works. FQDNs, DNS client configuration. Hands on Troubleshooting DNS.
<li>Security</li>
Firewalls, firewall architectures, DMZ, how
firewalls work, proxy servers, filtering, ACLs, IDS,
VPNs, authentication, encryption, tunnels, secure
protocols. Hands on Firewalls, SSH
<li>Troubleshooting</li>
Methods, tools. Using the 7 layer model.
Troubleshooting toolkits. Hands on Fixing the
network. 
 </ul>

LINX 1

<h3>TCP/IP training course description</h3>
 An intensive hands on IP foundation leading to LINX
 Accredited Internet Technician stage 1. The course
 focuses on all parts of TCP/IP including layers 4 to 7 on
 end stations as well as layer 3 on routers. The TCP/IP
 protocols are also studied to enable delegates to be
 able to troubleshoot TCP/IP using Wireshark. Hands on
 sessions are used to reinforce the theory rather than
 teach specific manufacturer equipment. 
 A multiple choice exam, leading to the LAIT I
 certification, is available after the course. The exam
 consists of 40 questions and lasts 1.5 hours. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Use ping, traceroute and other tools to diagnose
 faults on a network.</li>
 <li>Configure IP on PCs and routers.</li>
 <li>Plan IP addresses and subnets.</li>
 <li>Analyse IP and TCP packets using an analyser.</li>
 <li>Troubleshoot TCP/IP.</li>
 </ul>
 <h5>
 TCP/IP training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Network engineers.
 
							<li>Prerequisites:</li>
							
 None 
 
							<li>Duration</li>
							
 5 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>TCP/IP training course contents</h3>
 <ul>
 <li>What is TCP/IP?</li>
 TCP and IP are protocols, 7 layer model, network
 layers, hardware/software layers, internetworking,
 protocols, What is IP? What is TCP? The internet,
 The IAB, RFCs.
 <li> Ping and Wireshark</li>
 Host configuration, IP addresses, subnet masks,
 default gateways, ping. 
 Hands on Base configuration. Testing
 with ping. Analysing packets with Wireshark. 
 <li>Switches and Wireshark</li>
 Switches versus hubs, layer 2 forwarding table,
 flooding, broadcasts. 
 Hands on Building a
 switched based network. 
 <li>Configuring network devices</li>
 Configuration options, console port, putty, telnet. 
 Hands on Configuring switches, telnet. 
 <li>IP</li>
 IP packet format, protocol field, TTL, DiffServ,
 fragments, ICMP. 
 Hands on IP packet analysis. 
 <li>IP addressing</li>
 32 bits, dotted decimal, rules, networks, role of
 subnet masks, simple subnetting, prefix notation.
 Broadcasts, special use addresses. 
 Hands on Planning and implementing addressing. 
 <li>IP and the lower layers</li>
 ARP, media not supporting ARP. 
 Hands on ARP. 
 <li>Routing</li>
 What are routers? What routers do, default
 gateways, routing and addressing, routing tables,
 ways to update routing tables. 
 Hands on Building
 a routed network, traceroute. 
 <li>Routing protocols</li>
 IGPs and EGPs, RIP, RIPv2, Why not to use RIP,
 OSPF, OSPF metrics, convergence, distance
 vector protocols, link state protocols. 
 Hands on OSPF, analysing routing tables, loopbacks. 
 <li>Network simulators</li>
 Network simulators, EVE-NG, GNS3, CML. 
 Hands on Using EVE-NG. 
 <li>Subnetting</li>
 Subnetting to the bit level, ranges, how prefixes
 are used. 
 Hands on Subnetting. 
 <li>VLANS and IP addressing</li>
 What are VLANs, tagging, 802.1Q, Inter VLAN
 routing. 
 Hands on Inter VLAN routing. 
 <li>TCP and UDP</li>
 Layer 4, port numbers, client ports, broadcasts
 multicasts and layer 4, UDP header, TCP header,
 connections, ACK, sliding windows, options,
 connection states. Sockets. 
 Hands on Analysing
 TCP packets. 
 <li>IPv4 address configuration</li>
 Private addresses, NAT, NAPT, dynamic
 addressing, DHCP, link local addresses. 
 Hands on DHCP, NAT. 
 <li>IPv6</li>
 What is IPv6, 128 bit addresses, address formats,
 IPv6 address allocation, header format, migration,
 dual stack, tunnelling, NAT64, DNS64. 
 Hands on IPv6 setup troubleshooting. 
 <li>IPv6 address configuration</li>
 Static addressing, EUI-64 addresses, IPv6
 address order, SLAAC, DHCPv6. 
 Hands on SLAAC. 
 <li>Applications</li>
 Clients, servers, HTTP, Email, resource sharing,
 VoIP, video, terminal emulation, remote desktop.
 Network management and SNMP. 
 Hands on Servers, TFTP, VoIP packet analysis. 
 <li>DNS</li>
 Names and addresses, hosts file, how DNS
 works. FQDNs, DNS client configuration. 
 Hands on Troubleshooting DNS. 
 <li>Security</li>
 Firewalls, firewall architectures, DMZ, how
 firewalls work, proxy servers, filtering, ACLs, IDS,
 VPNs, authentication, encryption, tunnels, secure
 protocols. 
 Hands on Firewalls, SSH 
 <li>Troubleshooting</li>
 Methods, tools. Using the 7 layer model.
 Troubleshooting toolkits. 
 Hands on Fixing the
 network. 
 </ul>

TCP/IP foundation for engineers

<h3>Network fundamentals training course description</h3>
 An intensive hands on IP foundation leading to LINX
 Accredited Internet Technician stage 1. The course
 focuses on all parts of TCP/IP including layers 4 to 7 on
 end stations as well as layer 3 on routers. The TCP/IP
 protocols are also studied to enable delegates to be
 able to troubleshoot TCP/IP using Wireshark. Hands on
 sessions are used to reinforce the theory rather than
 teach specific manufacturer equipment. 
 A multiple choice exam, leading to the LAIT I
 certification, is available after the course. The exam
 consists of 40 questions and lasts 1.5 hours. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Use ping, traceroute and other tools to diagnose
 faults on a network.</li>
 <li>Configure IP on PCs and routers.</li>
 <li>Plan IP addresses and subnets.</li>
 <li>Analyse IP and TCP packets using an analyser.</li>
 <li>Troubleshoot TCP/IP.</li>
 </ul>
 <h5>
 Network fundamentals training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Network engineers.
 
							<li>Prerequisites:</li>
							
 None 
 
							<li>Duration</li>
							
 5 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Network fundamentals training course contents</h3>
 <ul>
 <li>What is TCP/IP?</li>
 TCP and IP are protocols, 7 layer model, network
 layers, hardware/software layers, internetworking,
 protocols, What is IP? What is TCP? The internet,
 The IAB, RFCs.
 <li> Ping and Wireshark</li>
 Host configuration, IP addresses, subnet masks,
 default gateways, ping. 
 Hands on Base configuration. Testing
 with ping. Analysing packets with Wireshark. 
 <li>Switches and Wireshark</li>
 Switches versus hubs, layer 2 forwarding table,
 flooding, broadcasts. 
 Hands on Building a
 switched based network. 
 <li>Configuring network devices</li>
 Configuration options, console port, putty, telnet. 
 Hands on Configuring switches, telnet. 
 <li>IP</li>
 IP packet format, protocol field, TTL, DiffServ,
 fragments, ICMP. 
 Hands on IP packet analysis. 
 <li>IP addressing</li>
 32 bits, dotted decimal, rules, networks, role of
 subnet masks, simple subnetting, prefix notation.
 Broadcasts, special use addresses. 
 Hands on Planning and implementing addressing. 
 <li>IP and the lower layers</li>
 ARP, media not supporting ARP. 
 Hands on ARP. 
 <li>Routing</li>
 What are routers? What routers do, default
 gateways, routing and addressing, routing tables,
 ways to update routing tables. 
 Hands on Building
 a routed network, traceroute. 
 <li>Routing protocols</li>
 IGPs and EGPs, RIP, RIPv2, Why not to use RIP,
 OSPF, OSPF metrics, convergence, distance
 vector protocols, link state protocols. 
 Hands on OSPF, analysing routing tables, loopbacks. 
 <li>Network simulators</li>
 Network simulators, EVE-NG, GNS3, CML. 
 Hands on Using EVE-NG. 
 <li>Subnetting</li>
 Subnetting to the bit level, ranges, how prefixes
 are used. 
 Hands on Subnetting. 
 <li>VLANS and IP addressing</li>
 What are VLANs, tagging, 802.1Q, Inter VLAN
 routing. 
 Hands on Inter VLAN routing. 
 <li>TCP and UDP</li>
 Layer 4, port numbers, client ports, broadcasts
 multicasts and layer 4, UDP header, TCP header,
 connections, ACK, sliding windows, options,
 connection states. Sockets. 
 Hands on Analysing
 TCP packets. 
 <li>IPv4 address configuration</li>
 Private addresses, NAT, NAPT, dynamic
 addressing, DHCP, link local addresses. 
 Hands on DHCP, NAT. 
 <li>IPv6</li>
 What is IPv6, 128 bit addresses, address formats,
 IPv6 address allocation, header format, migration,
 dual stack, tunnelling, NAT64, DNS64. 
 Hands on IPv6 setup troubleshooting. 
 <li>IPv6 address configuration</li>
 Static addressing, EUI-64 addresses, IPv6
 address order, SLAAC, DHCPv6. 
 Hands on SLAAC. 
 <li>Applications</li>
 Clients, servers, HTTP, Email, resource sharing,
 VoIP, video, terminal emulation, remote desktop.
 Network management and SNMP. 
 Hands on Servers, TFTP, VoIP packet analysis. 
 <li>DNS</li>
 Names and addresses, hosts file, how DNS
 works. FQDNs, DNS client configuration. 
 Hands on Troubleshooting DNS. 
 <li>Security</li>
 Firewalls, firewall architectures, DMZ, how
 firewalls work, proxy servers, filtering, ACLs, IDS,
 VPNs, authentication, encryption, tunnels, secure
 protocols. 
 Hands on Firewalls, SSH 
 <li>Troubleshooting</li>
 Methods, tools. Using the 7 layer model.
 Troubleshooting toolkits. 
 Hands on Fixing the
 network. 
 </ul>

Network fundamentals for engineers

Slough

Portsmouth

Bingley

Cardiff

Milton Keynes 

Nottingham

Birmingham

Bedford

Liverpool 

<div data-testid="richTextElement" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">ONLINE STUDY - In your own time (approx. 6 hours study time) +CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours) Awarding Body:&nbsp;Open College Network (OCN) Credit for LearningAward Level:&nbsp;Level 3 (Advanced Level) - Ireland Level 5CPD Certified:&nbsp;Yes (CPD Accreditation)Minimum Age:&nbsp;18 (16 with parental consent)Entry requirements:&nbsp;None. (English Level 2 desirable)Training Locations:&nbsp;Study online + Classroom&nbsp;OCN Accredited at UK Level 3 (Ireland Level 5) &nbsp;PART 1 - Theory:&nbsp;Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc. PART 2 - Skills and Practical Development: Safely and competently set up and maintain a Peripheral IV Infusion. Attend a classroom location to complete your practical training. <div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"> Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above. </div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">Course Itinerary:</div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"> </div>PART 1 - THEORY (ONLINE) M1 - Peripheral IV Cannulation - Introduction: Definitions - understanding terminology relating to PIVC. IV Therapy and NMC guidelines. M2 - Legal &amp; Professional Responsibilities: Legal Obligations and Accountability. Criminal, Civil and Contractual law in Healthcare. Vicarious Liability and your Duty of Care. M3 - Anatomy &amp; Physiology: Sites appropriate to IV cannulation. Hand vs. arm. Advantages and disadvantages of relevant veins. An overview of Homeostasis and Fluid Balance. M4 - Hygiene and Infection Prevention &amp; Control (IPC): Reducing healthcare-associated infections. Keeping Safe. Bloodborne Pathogens and Work Practice Controls. Standard Precautions. Waste Disposal. Needle-stick injuries. M5 - Indications and Advantages: When to cannulate, infusion types and benefits over alternative infusion routes. Continuous and intermittent infusion. Prophylactic use before procedures and in unstable patients. Contraindications. M6 - Equipment: Cannula types, sizes and colour coding. How to select appropriate size. Equipment overview for total procedure. M7 - Vein Choice for Cannulation: Correct vein selection. Which veins to avoid. How to manage an unsuccessful cannulation. M8 - Procedures: Full procedure for cannulation including correct documentation. M8: Guide to Cannulation - revision M8: Video - Recap with full procedure M9 - Contraindications: When inappropriate to cannulate including patients with specific health conditions. M10 - Complications: A detailed look at potential complications during and after cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions. PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED BEFORE JOINING US FOR YOUR PRACTICAL TRAINING PART 2 (CLASSROOM: 1 - Welcome, introductions and overview: Classroom - registration and introductions. Virtual Classroom - audio/visual checks and registration. 2 - Legal &amp; Professional Responsibilities: Overview and discussion. 3 - Anatomy - key points (appropriate to PIVC): Arteries and veins. Selecting an approprate site. Sites to avoid and &ldquo;first choice&rdquo; sites. 4 - Cannulae - selection and types: A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD. 5 - Complications: Complications of pVAD insertion including examples of infiltration, haematoma, extravasation and transfixation. 6 - VIP Score: Understanding and using the Visual Infusion Phlebitis score. 7 - Equipment - overview: We take a look at all essential equipment required for PIVC. 8 - PRACTICAL SESSIONS: Multiple practical sessions throughout the session. 9 - Fluids: The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann&rsquo;s solution, Colloids (and risks), blood products. 10 - Infusion Rates: Calculating infusion rates and drops per minute. This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.&nbsp;<div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)</div></div>

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Geopace Training

Allied Health Professions (AHP)

Intravenous Cannulation

Aesthetics

Medicine & Nursing

Venepuncture & Cannulation

Learn how to cannulate ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced) - Ireland Level 5

    CPD Accredited - The CPD Certification Service

    Classroom or Virtual Classroom options

    Covers all steps for cannulating in arm or hand

    Practise on artificial arms and fake blood!

    Essential qualification for all IV therapies

    Phlebotomy training desirable but not essential

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Peripheral I.V. Cannulation Course (GPT008)

Key Facts:


COURSE 1: PERIPHERAL I.V. CANNULATION COURSE (GPT008)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.

 
Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)
Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.





Key Facts:


COURSE 2: VACCINATION / INJECTION COURSE (GPT601)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)


Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (FDSc Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)



SUITABLE FOR:
- MEDICAL / HEALTHCARE (trainees and professionals)
- AESTHETIC THERAPISTS (all levels)

 
This Vaccination / Injection Course is a nurse or paramedic-led half-day session covering all essential theory and practical skill-sets required to deliver effective Intramuscular, Intradermal and Subcutaneous injections / vaccinations.
 
PART 1 - THEORY (online)
Delegates will fully understand the theory and will be able to demonstrate they can identify the correct patient, gain consent and safely administer a vaccine or injection, conforming to WHO and Skills for Health recommended standards.
 
Itinerary:
M01 Course Overview and brief history
M02 Infection Protection Control
M03 Professionalism and Effective Communication
M04 Understanding injection procedures
M05 Why do we vaccinate?
M06 The immune system and how vaccines work. Vaccine types and composition.
M07 The National Vaccine Policy & Schedule
M08 Vaccine preventable diseases
M08A – Covid-19 Update
M09 Vaccines - understanding the reconstitution process
M10 Storage and Handling – understanding correct procedures and protocols
M11 Equipment – Syringes and Syringe Types, Needles and Needle Types, SDV (Single-Dose Vials), MDV (Multi-Dose Vials), Pre-Filled Syringes, Gloves and PPE.
M12 Vaccination sites, techniques and anatomical site selection
i) Intramuscular (IM) Injection
ii) Subcutaneous (SubCut) Injection
iii) Intradermal (ID) Injection
M13 Legal requirements, Consent and Standard Operating Procedures
M14 Adverse Reactions and Basic Life Support Guidance
M15 Record keeping & Documentation
 
PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING
PART 2 - CLASSROOM (am, pm or evening sessions)
3 - 4 hours skill-set development with practical demonstrations and hands-on experience performing Intramuscular, Intradermal and Subcutaneous Injections.
 


How do I attend?

EITHER -
CLASSROOM OPTION - Complete your theory training online at home or work, then attend one of our scheduled classroom locations, completing your Peripheral IV Cannulation Course and your Injection Course on the same day.
Our Peripheral IV Cannulation Course and Injection Course training kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available for you to add at time of booking. Training kits mirror the same equipment and supplies used in the classroom and both include detailed video instructions, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for your one full day to complete your cannulation and injection course training.

Our Virtual Classroom option includes two very comprehensive training kits - one for your cannulation course and one for your injection course. Kits are included at no charge (normally £79.95 and £39.95 respectively) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Additional Courses suitable for Aesthetic Therapists:
Our popular Introduction to Phlebotomy Course also trains you to perform venepuncture at Advanced Level. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Advanced Level.
If you already have phlebotomy skills (or decide to enroll on our phlebotomy training course) then you will be able to offer your clients Platelet-Rich Plasma (PRP) Treatments, also known as Vampire Facials. Our PRP (Vampire Facials) Course trains you in the harvesting, preparation and treatment of PRP for application to your clients as required. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Foundation Degree Level.

If you would like to "mix and match" your training dates and/or locations or would like to build your own package of courses then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are dually accredited and are Skills for Health & WHO compliant.

Medical Aesthetics

Allied Health

Platelet-rich plasma (PRP)

Aesthetic Practitioner

Facial Aesthetics

THIS COURSE PACKAGE INCLUDES:
1: PERIPHERAL I.V. CANNULATION - IV THERAPIES COURSE (GPT008)
2: VACCINATION / INJECTION COURSE (GPT601)

Learn how to administer injectables and intravenous therapies ...

FAST-TRACK YOUR AESTHETICS TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% Multi-Course Discount

    Cover all stages from Level 1 through to Level 4 (FDSc)

    Cover your theory training online

    Complete your advanced practical training in 1 day

    Practical training in Classroom or Virtual Classroom

    Comprehensive Practise@Home training kits for VC

    Awards 2 accredited qualifications

    Dual Accreditations for all courses

    Covers all steps required to safely perform injectables

    Covers all steps required to safely perform IV therapies

    Practise IV on artificial arm with fake blood

    Practise injection techniques on realistic injection pads

    Learn beginner to advanced skills and techniques

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Aesthetic Therapy Training - Beginner to Advanced PACKAGE

Burnley

This course is the next step on your Reiki journey if you would like to be able to use Reiki at a higher level and work with clients/familyThis level 2 Reiki course is for you if you want to give Reiki healing at a more intense level or give healing treatments to others. Here you are introduced to the Reiki symbols for the first time<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Cho Ku Rei (power symbol)</li><li fr-original-style="" style="box-sizing: border-box;">Sei He Ki (emotional symbol)</li><li fr-original-style="" style="box-sizing: border-box;">Hon Sha Ze Sho Nen (distance healing symbol)</li></ul>What will I learn on this course:-<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">How to use the Reiki sacred symbols</li><li fr-original-style="" style="box-sizing: border-box;">What is Distance Healing and how to use the distance symbol so you can send Reiki healing to others.</li><li fr-original-style="" style="box-sizing: border-box;">Have increased level 2 Reiki energy</li><li fr-original-style="" style="box-sizing: border-box;">How to practice Self-Healing using the increased energy</li><li fr-original-style="" style="box-sizing: border-box;">Hand positions when healing others</li><li fr-original-style="" style="box-sizing: border-box;">The 21 day Cleansing Process explained</li><li fr-original-style="" style="box-sizing: border-box;">Professional Ethics</li><li fr-original-style="" style="box-sizing: border-box;">Question and answer session</li></ul>You will be initiated to the Reiki energy by a level 2 attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course. I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.The course can be booked online here and you will receive instructions on how to access the course.I look forward to meeting you and sharing my knowledge and experience of Reiki with you.What this course offers you<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Individual Support - During and after your course</li><li fr-original-style="" style="box-sizing: border-box;">Practical Experience - Step by step training is given so that you can gain valuable experience using Reiki</li><li fr-original-style="" style="box-sizing: border-box;">Energy Perception &ndash; You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel</li><li fr-original-style="" style="box-sizing: border-box;">Personal Growth - You will discover for yourself the increased level of Reiki healing and be able to use its methods of healing on others and have paying clients if you wish&nbsp;</li></ul>Why a Level 2 Course?&nbsp;Reiki at Level 2 is the level of training which is needed to practise Reiki healing professionally and have paying clients. Often reflexologists, aromatherapists and other complementary therapists add reiki healing to their range of healing skills that they offer their clients.&nbsp;However it is not just for those who have clients it is also a powerful self-development technique for your own personal healing experience and to share with family/friends and give them the benefit of well-being.A certificate at Reiki Level One is needed for you to enrol on this course and I am happy to accept students who have trained elsewhere with another Reiki Master.The Reiki Two course is taught live on line using Zoom.Testimonials:- What other students who have attended my courses are saying&nbsp;Level Two Course&ldquo;She explains everything so well and makes it easy to understand and connect to the reiki. This is my 2nd course I&rsquo;ve done with Margaret&rdquo; (Louise B)."Thank you, I thoroughly enjoyed the course." (Beverley S)This is a very well organized and informative course! (Georgie P)

Margaret Cook - Learn More About Reiki

Energy Healing

Reiki

Reiki Healer

I am a Reiki Teacher in Manchester and one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course. I teach all three levels of Reiki courses, level 1 reiki. level 2 reiki and reiki master level 3

Reiki Level 2 Practitioner Online Course

<div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><h2 fr-original-style="" style="box-sizing: border-box;">INTRAMUSCULAR, INTRADERMAL &amp; SUBCUTANEOUS INJECTION COURSE (GPT601) CLASSROOM or VIRTUAL CLASSROOM (with online theory)</h2></div><section fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-testid="columns" fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-mesh-id="comp-kl8214n52inlineContent" data-testid="inline-content" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214n52inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Learn how to administer vaccines or injections ...&nbsp;</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Nationally Recognised Qualification</li><li fr-original-style="" style="box-sizing: border-box;">Includes IM, ID and Sub-Cut Injection methods</li><li fr-original-style="" style="box-sizing: border-box;">OCN Accredited - Level 4 (Foundation Degree - FDSc)</li><li fr-original-style="" style="box-sizing: border-box;">Covers all steps to safely perform a vaccination</li><li fr-original-style="" style="box-sizing: border-box;">Use same techniques and skills for aesthetic therapies</li><li fr-original-style="" style="box-sizing: border-box;">Includes B12, Vitamin C and other treatments</li><li fr-original-style="" style="box-sizing: border-box;">Essential qualification for all injections</li><li fr-original-style="" style="box-sizing: border-box;">Basic understanding of English language required</li><li fr-original-style="" style="box-sizing: border-box;">OPEN TO ALL APPLICANTS</li></ul><div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;">About this course</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Learning Outcomes</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">After the course</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">PART 1 - Theory: complete online at home or work and download a certificate of completionPART 2 - Skills and Practical Development: Attend in the Classroom or Virtual ClassroomVaccination - all essential vaccines including Covid-19, Flu and other annual vaccinesInjections - Aesthetics - B12, Vit C etc.78 UK &amp; Eire training locationsOCN Accredited at Level 4 (FDSc)Medical training standards throughoutSkills for Health &amp; WHO compliantLearning Outcomes<div data-mesh-id="comp-kl8214o43inlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214o43inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Train up to point of first vaccination or injection&nbsp;All theory and practical skills required to perform a safe procedureCovers all essential theory and skill-set development to meet medical standardsUnderstand the procedures used to set up &nbsp;a manage and administer a vaccinePost-injection management and how to avoid critical complicationsCorrect client care and aftercareIncludes legal, consent and documentationAfter the course<div data-mesh-id="comp-kl8214oainlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214oainlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Safely and competently administer a vaccine or drug treatment (ie. B12)Correct client management before, during injection and safe after-careUnderstanding equipment types and appropriate choicesUnderstand vaccine management controlAppreciate legal and professional responsibilitiesOffer injection therapies to clients - vitamin supplementsAdminister in hospitals, GP Surgeries and Outreach Centres</div></div></div></div></div></div></div></div></div></div></div></section>

INTRAMUSCULAR, INTRADERMAL & SUBCUTANEOUS INJECTION COURSE (GPT601)
CLASSROOM or VIRTUAL CLASSROOM (with online theory)
Learn how to administer vaccines or injections ... 
Nationally Recognised Qualification
Includes IM, ID and Sub-Cut Injection methods
OCN Accredited - Level 4 (Foundation Degree - FDSc)
Covers all steps to safely perform a vaccination
Use same techniques and skills for aesthetic therapies
Includes B12, Vitamin C and other treatments
Essential qualification for all injections
Basic understanding of English language required
OPEN TO ALL APPLICANTS
About this course
Learning Outcomes
After the course
PART 1 - Theory: complete online at
home or work and download a certificate of completion
PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom
Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines
Injections - Aesthetics - B12, Vit C etc.
78 UK & Eire training locations
OCN Accredited at Level 4 (FDSc)
Medical training standards throughout
Skills for Health & WHO compliant
Learning Outcomes
Train up to point of first vaccination or injection 
All theory and practical skills required to perform a safe procedure
Covers all essential theory and skill-set development to meet medical standards
Understand the procedures used to set up a manage and administer a vaccine
Post-injection management and how to avoid critical complications
Correct client care and aftercare
Includes legal, consent and documentation
After the course
Safely and competently administer a vaccine or drug treatment (ie. B12)
Correct client management before, during injection and safe after-care
Understanding equipment types and appropriate choices
Understand vaccine management control
Appreciate legal and professional responsibilities
Offer injection therapies to clients - vitamin supplements
Administer in hospitals, GP Surgeries and Outreach Centres

Immunisation & Vaccination

Immunisation

Injection

Vaccination

Vaccinator

Learn how to administer vaccines or injections ...

    Nationally Recognised Qualification

    Includes IM, ID and Sub-Cut Injection methods

    OCN Accredited - Level 4 (Foundation Degree - FDSc)

    Covers all steps to safely perform a vaccination

    Use same techniques and skills for aesthetic therapies

    Includes B12, Vitamin C and other treatments

    Essential qualification for all injections

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Vaccination / Injection Course (GPT601)

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Kent

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Dover

ECS Card Health & Safety Course Liverpool

<div id="course-pills-1">Duration5 Days30 CPD hoursThis course is intended forThe primary audience for this course is any IT, facilities or data centre professional, who are involved in the design/build, renovation or relocation of a mission-critical data centre.OverviewThis 5-day course is designed to prepare participants to analyse a given business case and perform technical evaluation for a project plan and a set of designs for the implementation of a mission critical data centre. The course also engages participants in product evaluations and demonstrates how to select equipment and develop equipment test scripts (IET) and integrated performance and validation testing (IPVT). CDCEÂ© builds upon knowledge gained in CDCP and CDCS courses. Participants who pass the exam will join the industry's elite data centre project design experts. CDCEÂ© is the highest level training in the EPI Design and Build training track under the EPI Data Centre Training Framework. Participants must hold a valid CDCS certificate in order to be able to register for the CDCE class.CDCEÂ© is the premier certification for data centre professionals in the data centre design/build and related fields.</div><div id="course-pills-2"><h4>Data Centre Life Cycle</h4><ul><li>Data centre lifecycle stages and phases Exercise: Stage/Phase/Milestone/Document mapping</li></ul><h4>Design Preparation</h4><ul><li>Creation of a SON ? Statement Of Need Technology review Conceptual sizing How to calculate for computer room space How to calculate facility space How to calculate incoming power Exercise: Conceptual sizing building and power Analysing capacity of existing facility Analysing investment options Site selection Permits and approvals Exercise: Site selection Conceptual design Budget and project timeline Business case preparation Project delivery structure Project management options Project manager and team</li></ul><h4>Design Planning</h4><ul><li>OSRA?Operational Systems Requirement Analysis TFRA?Technical Facilities Requirement Analysis Operations and maintenance review RFP?Request For Proposal process Vendor selection</li></ul><h4>Design Development</h4><ul><li>Project planning Design development PDR ? Preliminary Design Review Equipment selection FDR/V ? Final Design Review/Validation Exercise: Full design validation of power, cooling, floor plans, fire suppression Design freeze and LLTI Creation of construction documents BOM/BOQ ? Bill Of Material/Bill Of Quantity Exercise: Equipment selection</li></ul><h4>Acquire</h4><ul><li>Requirements of purchase orders Shipping terms FWT/FAT ? Factory Witness Test/Factory Acceptance Test Sequencing Incoming goods inspection and handling Asset management</li></ul><h4>Construct</h4><ul><li>Temporary essential services Erection of the building Permanent essential services Building inspection Snag list COF?Certificate Of Fitness</li></ul><h4>Fit-Out</h4><ul><li>Fit-Out Builders cleaning As-Built Drawings</li></ul><h4>Test &amp; Commissioning</h4><ul><li>IET?Individual Equipment Test IPVT/IST?Integrated Performance Verification Test/Integrated Systems Test Common mistakes with IET/IPVT Deep cleaning Exercise: IET/IPVT scripting</li></ul><h4>Hand-Over</h4><ul><li>Facility hand-over requirements and documents PCC?Practical Completion Certificate DLP?Defect Liability Period Defect Management ICT Systems Installation ICT Systems Testing Hand-Over/DLP Expiry FCC?Final Completion Certificate</li></ul><h4>Retirement</h4><ul><li>Reasons and definitions of retirement Building the business case and project plan Sequencing Transfer of site Demolishing of site Legal matters FCC?Final Completion Certificate</li></ul><h4>Exam: Certified Data Centre Expert (CDCEÂ©)</h4><ul><li>The CDCEÂ© exam is in two parts: Part A is a 90-minute closed book exam, with 60 multiple-choice questions. For Part A, the candidate requires a minimum of 45 correct answers to pass the exam. Part B is a 90-minute closed book exam, with 25 open questions. For Part B the candidate needs to obtain a minimum of 75% to pass.</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4> Nexus Humans Certified Data Centre Expert (CDCE) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Certified Data Centre Expert (CDCE) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.</div>

1791 Courses in Cardiff

Essential 5G

By Systems & Network Training

Complete JavaScript

By Systems & Network Training

Abrasive wheels

By Vp ESS Training

Process Control and Instrumentation

By EnergyEdge - Training for a Sustainable Energy Future

Preventive and Predictive Maintenance

By EnergyEdge - Training for a Sustainable Energy Future

Pre-Experienced Worker Route Package

By Optima Electrical Training

Manual Handling Awareness

By Vp ESS Training

LINX 1

By Systems & Network Training

TCP/IP foundation for engineers

By Systems & Network Training

Network fundamentals for engineers

By Systems & Network Training

Search By Location