Name: Smart Metering & Power Quality Analytics
Price: 2683 GBP
Availability: InStock

Redhill

<h3>VoIP training course description</h3>
 
 Convergence of voice and data is now a common place mainstream technology. Our Voice Over IP course investigates the characteristics of voice transmission and then studies the impact on IP networks. Practical sessions with soft phones, hard phones and gateways allow the students to see all aspects of VoIP. Network analysers are used to study packets on the wire. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Describe the issues of voice and data convergence.</li>
 <li>Describe techniques, which can be used in IP to provide low uniform delay. </li>
 <li>Evaluate VoIP technologies.</li>
 <li>Design data networks, which will support voice.</li>
 </ul>
 
 <h5>
 VoIP training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone working in the field of networking or telecommunications. 
 
							<li>Prerequisites:</li>
							
 TCP/IP foundation for engineers Intro to data communications &amp; networking
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>VoIP training course contents</h3>
 <ul>
				<li>What is VoIP</li>
				Voice over IP, brief review of IP, brief review of
telephones and voice.
<li>Configuring IP softphones</li>
What are softphones? Downloading, installing.
 Hands on Building the base IP network, a simple
VoIP call with softphones, Internet telephony.
<li>Addressing</li>
E164, FQDN, IP addresses, URIs, DNS, SIP
addressing, H.323 addressing.
<li>VoIP issues</li>
Bandwidth, Delay, Jitter, digitising voice,
digitisation steps, coding, quality issues, MOS,
voice compression, silence suppression,
packetising voice, prioritising voice, jitter buffers.
 Hands on Simple packet analysis.
<li>Architectures</li>
Desktop, backbone, gateway, hard phones, PoE,
integrating phones and PCs, carriers,
Softswitches. Hands on Integrating Softphones,
hard phones and analog phones.
<li>IP performance and QoS</li>
ITU delay recommendations, IP DSCP field,
DiffServ, IP precedence, queuing strategies; FIFO,
WFQ, custom, priority, RED, LLQ.
<li>VoIP protocol stack</li>
RTP, RTCP, mixers and translators, RSVP.
Bandwidth, Erlang models, link layer overhead.
 Hands on Calculating VoIP bandwidth, analysing
RTP packets.
<li>ITU Recommendation H.323</li>
Architecture, protocols, terminals, Call setup,
Gatekeepers, gateway discovery, H.323
registration with a gatekeeper. Hands on PC to
PC using H.323.
<li>IETF - Session Initiation Protocol</li>
What is SIP? SIP protocol stack, SDP, Sip
architecture, SIP messages, Initial SIP phone
startup, SIP servers, proxy server, redirect server.
 Hands on PC to PC using SIP.
<li>Carrier networks</li>
Signalling systems, SS7, media gateways, Media
gateway controllers, signalling gateways, MGCP,
Megaco, SIGTRAN. Hands on PSTN
interworking.
<li>Video over IP</li>
Video components, digital video, pictures and
audio, video codecs, issues and solutions, video
conferencing, multipoint video conferencing, video
protocol stack.
<li>Appendix 1: Multicasting.</li>
<li>Appendix 2: Voice/data integration without IP. </li> 


 </ul>

Systems & Network Training

Network & Security

Network Engineer

Definitive VoIP for engineers

General Admission

<h3>Oracle SQL training course description</h3>
 The Oracle SQL course is designed to give delegates practical experience in writing SQL statements and scripts using Oracle SQL. The basic SELECT statement, the use of SQL functions and the basic table and view handling statements are introduced.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Create SQL statements to query database tables.</li>
<li>Use standard aggregate functions and related SELECT statement clauses.</li>
<li>Join Tables.</li>
<li>Use basic subqueries and the set operators.</li>
<li>Use numeric, character and date functions.</li>
<li>Use conversion and other miscellaneous functions.</li>
<li>Use SQL parameters.</li>
<li>Use complex subqueries.</li>
<li>Create and alter tables and views.</li>
<li>Insert, update and delete rows in database tables.</li>
<li>Manage sequences and synonyms.
</li>
 </ul>
 <h5>
 Oracle SQL training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone who needs to use and understand Oracle SQL to query and update data in an Oracle database.
 
							<li>Prerequisites:</li>
							
 None.
 
							<li>Duration</li>
							
 3 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Oracle SQL training course contents</h3>
 <ul>
 <li>Retrieving data with the SELECT statement </li>
The SELECT statement, The SELECT and FROM clauses, Conditions and the WHERE clause, Other conditional operators, Logical operators, The ORDER BY clause, Column aliases, Arithmetic expressions, Precedence of operators.

<li>Aggregate functions </li>
Overview of built In aggregate functions, The GROUP BY clause, The HAVING clause.

<li>Joining tables </li>
Overview of table joins, Inner joins, Table aliases, Outer joins, Self joins, ANSI standard joins.

<li>Basic subqueries and set operators </li>
Overview of subqueries, Basic subqueries, Set operators, The union, intersect and ,minus operators.

<li>Numeric, character and data functions </li>
Function types, Using the table dual to try out functions, Numeric functions, Character functions, String concatenation, Date arithmetic and date functions.

<li>Conversion and miscellaneous functions </li>
Conversion functions, The NVL and NVL2 functions, The DECODE function, CASE expressions, The COALESCE and NULLIF functions.

<li>SQL parameters </li>
Command line substitution parameters, The accept command, The define and undefine commands.

<li>Complex subqueries </li>
Subqueries usage, In-line views, Top-N queries, Subqueries with joins, Multi column subqueries, Correlated subqueries, Subquery rules, Using the ANY, ALL and SOME operators.

<li>Managing data </li>
Inserting rows, Updating rows, Deleting rows, Verifying updates, Transaction control, Commit and rollback, Savepoints, Commits and constraints, Amending data in SQL developer.

<li>Managing tables </li>
Creating tables, Specifying constraints, Altering tables, columns and constraints, Dropping tables, columns and constraints, Recovering dropped tables, Copying tables.

<li>Managing indexes and views </li>
Creating indexes, Dropping indexes, Listing indexes, Creating and using views, Dropping views, Listing views.

<li>Managing sequences and synonyms </li>
Create a sequence, View sequence details, Create a synonym, List synonyms.
				
 </ul>

Oracle SQL foundation

<h3>LTE Architecture and Protocols course description</h3>
 This course provides a comprehensive tour of the LTE
architecture along with services provided and the
protocols used.
 
				<h5>What will you learn</h5>
				<ul>
				 
			
 <li>Describe the overall architecture of LTE.</li>
																				<li>Explain the information flows through LTE.</li>
 <li>Describe the LTE security.</li>
 <li>Describe LTE mobility management.</li> 
 <li>Recognise the next steps for LTE.</li>
 </ul>
 <h5>
 LTE Architecture and Protocols course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone working with LTE.
 
							<li>Prerequisites:</li>
							
 Mobile communications demystified
							
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>LTE Architecture and Protocols course contents</h3>
 <ul>
				<li>Introduction </li>
History, LTE key features. The 4G ITU process. The LTE 3GPP specifications. Specifications.

<li>System Architecture </li>
LTE hardware architecture. UE architecture and capabilities. E-UTRAN and eNB. EPC, MME functions, SGW, PGW and PCRF. System interfaces and protocol stacks. Example information flows. Dedicated and default bearers. EMM, ECM, RRC state diagrams.

<li>Radio transmission and reception </li>
OFDMA, SC-FDMA, MIMO antennas. Air interface protocol stack. Logical, transport and physical channels. Frame and slot structure, the resource grid. Resource element mapping of the physical channels and signals. Cell acquisition, data transmission and random access. MAC, RLC, PDCP protocols. LTE spectrum allocation.

<li>Power-on procedures </li>
Network and cell selection. RRC connection establishment. Attach procedure, including IP address allocation and default bearer activation. LTE detach procedure.

<li>Security in LTE networks </li>
LTE security features, identity confidentiality, ciphering and integrity protection. Architecture of network access security in LTE. Secure key hierarchy. Authentication and key agreement procedure. Security mode command procedure. Network domain security architecture. Security associations using IKE and IPSec.

<li>Mobility management </li>
RRC_IDLE, RRC_CONNECTED. Cell reselection, tracking area updates. Measurement reporting. X2 and S1 based handovers. Interoperation with UMTS, GSM and non-3GPP technologies such as cdma2000.

<li>QoS, policy control and charging </li>
QoS in LTE, EPS bearers, service data flows and packet flows. The architecture and signalling procedures for policy and charging control. Data transport using GPRS, differentiated services and MPLS. Offline and online charging in LTE.

<li>Delivery of voice and text messages over LTE </li>
Difficulties and solutions for Voice over LTE. Architecture and call setup procedures for circuit switched fallback. Architecture, protocols and call setup procedures in IP multimedia subsystem.

<li>Enhancements in release 9 </li>
LTE location services. Multimedia broadcast / multicast service and MBSFN. Cell selection, commercial mobile alert service.

<li>LTE Advanced and release 10 </li>
Impact of carrier aggregation on LTE air interface. Enhanced MIMO processing on uplink and downlink. Relaying. Release 11 and beyond.

<li>OAM and self organising networks </li>
Operation, administration, maintenance and provisioning for LTE. Self-configuration of base station parameters. Fractional frequency re-use, inter-cell interference co-ordination. Self-optimisation of base station procedures. Self-healing to detect and recover from faults.
 </ul>

LTE Architecture and Protocols

<h3>5G training course description</h3>
 This course is designed to give the delegate an
understanding of the technologies and interworking
requirements of the next generation of cellular
communications.
It is not a definitive set of descriptions but a possibility
of the final deployment. During the course we will
investigate the 10 pillars for 5G, which will include
various Radio Access Technologies that are required to
interwork smoothly. Hence we will look at the 4G Pro
features and other RATs.
 
				<h5>What will you learn</h5>
				<ul>
				 
				<li>List the ten pillars of 5G deployment.</li>
																				<li>Explain the 5G Internet and Software Distributed
Networks (SDN).</li>
 <li>Explain carrier aggregation, the mobile cloud and
RAT virtualisation.</li>
 <li>Explain an overall picture of 5G architecture.</li>
 </ul>
 <h5>
 5G training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone who is looking to work with next generation
networks. 
 
							<li>Prerequisites:</li>
							
 Mobile communications demystified
 
							<li>Duration</li>
							
 3 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>5G training course contents</h3>
 <ul>
				<li>Drivers for 5G </li>
5G Road Map, 10 Pillars of 5G, evolving RATs, small cell, o SON, MTCm, mm-wave, backhaul, EE, new spectrum, spectrum sharing, RAN virtualisation.

<li>4G LTE advanced features </li>
*MIMO, Downlink &amp; uplink MIMO R8, MIMO technology in LTE advanced, Downlink 8-layer SU-MIMO, Downlink MU-MIMO, Uplink MU-MIMO, Uplink transmit diversity, Coordinated multi-point operation (CoMP), Independent eNB &amp; remote base station configurations, Downlink CoMP, * Uplink Multi-Cell Reception.

<li>ICIC &amp; eICIC </li>
ICIC, Homogeneous to heterogeneous network, eICIC, Macro-pico scenario, Macro-femto scenario, Time orthogonal frequencies. Almost Blank Subframe (ABS).

<li>Carrier aggregation </li>
Component carriers (CC), * CC aggregation, Intra-band contiguous solutions, Intra-band non-contiguous solutions, Inter-band non-contiguous solutions, CA bandwidth classes, Aggregated transmission bandwidth configurations (ATBC), Possible carrier aggregation configurations (Rel 9, 10 &amp; 12).

<li>Enhanced Interference Mitigation &amp; Traffic Adaptation (eIMTA) </li>
TDD UL-DL reconfiguration for traffic adaptation, Reconfiguration mechanisms, Interference mitigation schemes, Dynamic &amp; flexible resource allocation.

<li>5G architectures </li>
5G in Europe, horizon 2020 framework, 5G infrastructure PPP, METIS project, innovation centre, 5G in North America, research, company R &amp; D, 5G specifications.

<li>The 5G internet </li>
Cloud services, IoT &amp; context awareness, network reconfiguration &amp; virtualization support, hypervisors, SDN, the controller, service-oriented API, OpenFlow switches, SDN operation, SDN control for traffic flow redirection, OpenFlow controllers, how SDN works, application, control and infrastructure layers, a programmable network, how SDN &amp; NFV tie together, SDN's downside, SDN orchestration, Mobility, architectures for distributed mobility management, MEDIEVAL &amp; MEDIVO projects, a clean slate approach, mobility first architecture, network virtualization (VNet), INM, NetInf, ForMux, MEEM, GP &amp; AM, QoS support, network resource provisioning, IntServ, RSVP, DiffServ, CoS, aggregated resource provisioning, SICAP, MARA, Emerging approach for resource over-provisioning, example use case architecture for the 5G internet, integrating SDN/NFV for efficient resource control, control information repository, service admission control policies, network resource provisioning, control enforcement functions, network configurations, network operations.

<li>Small cells for 5G </li>
Average spectral efficiency evolution, What are small cells? WiFi &amp; Femto cells as candidate small-cell technologies, Capacity limits &amp; achievable gains with densifications, gains with multi-antenna techniques, gains with small cells, Mobile data demand, approach &amp; methodology, subscriber density projections, traffic demand projections, global mobile data traffic increase modelling, country level backhaul traffic projections, 2020 average spectrum requirement, Small cell challenges, backhaul, spectrum, automation.

<li>Cooperation for next generation wireless networks </li>
Cooperative diversity &amp; relaying strategies, Cooperative ARQ &amp; MAC protocols, NCCARQ &amp; PRCSMA packet exchange, Physical layer impact on MAC protocol, NCCARQ overview, PHY layer impact, Performance evaluation, simulation scenario and results.

<li>Mobile clouds; technology &amp; services for future communications platforms </li>
Mobile cloud, software, hardware and networking resources, Mobile cloud enablers, mobile user domain, wireless technologies, WWAN WLAN and WPAN range, Bluetooth, IEEE.802.15.4, software stacks, infrared, near field communications (NFC), store &amp; forward vs compute &amp; forward, random/linear network coding.

<li>Security for 5G communications </li>
Potential 5G architectures, Security issues &amp; challenges in 5G, user equipment, mobile malware attacks, 5G mobile botnets, attacks on 4G networks, C-RNTI &amp; packet sequence numbers based UE location tracking, false buffer status reports attacks, message insertion attacks, HeNB attacks, physical attacks, attacks on mobile operator's network, user data &amp; identity attacks, DDoS attacks, amplification, HSS saturation, external IP networks.
 </ul>

5G demystified

Course Overview:The "Promoting Best Practice in Asthma and Anaphylaxis Management Training" course is designed to provide healthcare professionals, educators, and individuals responsible for patient care with comprehensive knowledge and practical skills in the effective management of asthma and anaphylaxis. This course focuses on promoting evidence-based practices, proper emergency response protocols, prevention strategies, and patient education to ensure optimal outcomes for individuals with asthma and those at risk of anaphylaxis. Course Duration:1 day (9 Hours) Course Content:1. Introduction2. Recognition and Response3. Best Practices4. Action Plans and Medication5. Emergency Management6. Education and Assessment Course Objectives:1. Understand Asthma and Anaphylaxis Basics: Grasp the fundamentals of asthma and anaphylaxis, including pathophysiology, triggers, risk factors, and the importance of early intervention.2. Recognise Signs and Symptoms: Identify the clinical manifestations and symptom progression of asthma and anaphylaxis, enabling swift and accurate assessment.3. Implement Evidence-Based Best Practices: Apply the latest guidelines and evidence-based practices for asthma and anaphylaxis management, including prevention strategies, pharmacological interventions, and emergency procedures.4. Create Asthma Action Plans: Develop individualized asthma action plans to empower patients in self-management and prevent exacerbations.5. Administer Medications: Gain proficiency in administering inhalers, nebulizers, epinephrine auto-injectors, and other relevant medications, ensuring proper technique and patient education.6. Respond to Emergencies: Acquire the skills to respond effectively to acute asthma and anaphylaxis emergencies, including proper use of equipment like peak flow meters and spacers.7. Promote Education and Communication: Develop effective communication strategies for educating patients, caregivers, and the public about asthma and anaphylaxis management, triggers, and emergency responses. Course Assessment:Participant proficiency will be assessed through:<ul><li>Quizzes and assignments measuring theoretical understanding.</li><li>Practical assessments of inhaler technique training and emergency response protocols.</li><li>Participation in case discussions and scenario-based exercises.</li><li>A final assessment covering all aspects of asthma and anaphylaxis management.</li></ul><div> </div><div>Note: This course overview is a general guideline and can be customised to suit specific local requirements and preferences, therefore, we recommend that you contact us to discuss your requirements prior to making a booking.</div>

Guardian Angels Training

Gain comprehensive knowledge and practical skills in asthma and anaphylaxis management with our evidence-based training course. Ideal for healthcare professionals, educators, and patient care providers. Optimise patient outcomes with effective emergency response protocols, prevention strategies, and patient education.

Promoting Best Practice in Asthma and Anaphylaxis Training (Train the Trainer)

<h3>4G &amp; 5G Roaming Scenarios &amp; Procedures course description</h3>
 This course is designed to explain the roaming procedures of modern mobile networks, based on the GSMA roaming specification the course explains all scenarios where a mobile subscriber may find themselves whilst visiting a preferred mobile network partner.
 Interconnection between MNOs and the use of GRX &amp; IPX as an interworking process. The course will work through the registration &amp; authentication procedure, download of the user profile, the APN configuration &amp; DIAMETER process to verify user authenticity.
 VoLTE roaming and IMS registration procedures for voice support &amp; SMS delivery will be discussed and explained. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Architecture Models</li>
 <li>Technical requirements for interfaces - 4G Roaming Scenarios</li>
 <li>Technical requirements &amp; recommendations for services</li>
 <li>Other Technical Requirements &amp; Recommendations</li>
 <li>Technical Requirements for QoS support</li>
 <li>Technical Requirements &amp; Recommendations for Interfaces - 5G Scenarios</li>
 <li>Technical Requirements &amp; Recommendations for Interworking &amp; Coexistence with E-UTRAN &amp; EPC</li>
 <li>Technical Requirements &amp; Recommendations for Services</li>
 <li>Other Technical Requirements &amp; Recommendations</li>
 </ul>
 <h5>
 4G &amp; 5G Roaming Scenarios &amp; Procedures course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Those working in mobile networks.
 
							<li>Prerequisites:</li>
							
 None. 
 
							<li>Duration</li>
							
 3 days 
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>4G &amp; 5G Roaming Scenarios &amp; Procedures course contents</h3>
 
 <h5>Architecture Models</h5>
 <li>4G Evolved Packet System</li>
 <li>5G Core Network</li>
 <li>SGs Interface for CSFB&amp; SMS over SGs</li>
 
 
 <h5>Technical Requirements for Interfaces - 4G Roaming Scenarios</h5>
 <li>General requirements for inter-PLMN interfaces</li>
 <li>Stream Control Transmission Protocol (SCTP)</li>
 <li>IAMETER</li>
 <li>S8 Interface</li>
 <ol>
 <li>SGW selection</li>
 <li>PGW selection</li>
 </ol>
 <li>GTP</li>
 <li>Transport Layer engineering</li>
 <li>S9 interface</li>
 <ol>
 <li>Implementation requirements</li>
 <li>Guidelines for DIAMETER over S9</li>
 </ol>
 <li>S6a &amp; S6d interface</li>
 <li>Gy interface </li>
 <ol>
 <li>Guidelines for DIAMETER over Gy</li>
 </ol>
 <li>Legacy interworking scenarios</li>
 <ol>
 <li>VPLMN has not implemented LTE</li>
 <li>HPLMN has not implemented LTE</li>
 </ol>
 <li>Co-existence scenarios</li>
 <ol>
 <li>Possible scenarios</li>
 <ol>
 <li>2G/3G roaming agreement only</li>
 <li>2G/3G LTE roaming agreement</li>
 <li>LTE roaming registrations</li>
 </ol>
 </ol>
 <li>Consequences of different APN approaches when roaming</li>
 <ol>
 <li>Guidance regarding the APN approach when roaming</li>
 </ol>
 <li>Inter-RAT handover</li>
 <ol>
 <li>Handover &amp; access restrictions to/from 2G/3G &amp; LTE (Active mode)</li>
 <li>Access restriction for 2G/3G and/or LTE (Idle mode)</li>
 <li>Handover of PDN Connections between GERAN/UTRAN &amp; LTE</li>
 </ol>
 <li>Handover to/from non-3GPP accesses &amp; LTE</li>
 <li>Bandwidth considerations</li>
 <li>ARP considerations at handover from LTE to 2G/3G</li>
 
 
 <h5>Tech requirements &amp; recommendations for Services</h5>
 <li>SMS</li>
 <ol>
 
 <li>SMS over SGs</li>
 </ol>
 <li>Voice</li>
 <ol>
 <li>CSFB</li>
 <li>Roaming retry for CSFB</li>
 <li>Roaming Forwarding for CSFB </li>
 <li>Coexistence of Roaming Forwarding &amp; Roaming Retry</li>
 <li>Recommended procedures</li>
 </ol>
 <li>IMS Voice Roaming Architecture</li>
 
 
 <h5>Other Technical Requirements &amp; Recommendations</h5>
 <li>Access Control</li>
 <li>Addressing</li>
 <li>APN for IMS based services</li>
 <ol>
 <li>IMS Well Known APN</li>
 </ol>
 <li>APN for Home Operator Services</li>
 <ol>
 <li>Gateway Selection</li>
 <li>Inter-PLMN roaming handover</li>
 <li>Data off related functionality</li>
 </ol>
 <li>Emergency Services</li>
 <ol>
 <li>Emergency PDN connectivity</li>
 </ol>
 <li>Emergency Call indicator</li>
 <li>Security</li>
 <ol>
 <li>GTP Security</li>
 <li>DIAMETER Security</li>
 </ol>
 <li>DIAMTER Roaming hubbing</li>
 <li>Default APN</li>
 <li>E-UTRA NR Dual Connectivity with EPC</li>
 <ol>
 <li>GW Selection for E-UTRA-NR Dual Connectivity</li>
 </ol>
 <li>TAC/LAC Restriction Guidelines</li>
 
 
 <h5>Technical Requirements for QoS support</h5>
 <li>QoS parameters definition</li>
 <li>QoS Management in the Home Routed architecture</li>
 <li>QoS control for IMS APN in the S8HR architecture</li>
 <li>Support of QoS in GRX/IPX</li>
 <li>QoS Control in Local Breakout architecture</li>
 
 
 <h5>Technical Requirements &amp; Recommendations for Interfaces - 5G Scenarios</h5>
 <ol>
 <li>General requirements for inter-PLMN interfaces</li>
 <li>Transport protocol - TCP/IP</li>
 <li>Serialisation protocol - JSON</li>
 <li>Interface Definition language - OpenAPI</li>
 <li>Application Protocol - HTTP2</li>
 </ol>
 <li>Inter-PLMN (N32) Interface</li>
 <ol>
 <li>N32c</li>
 <li>N32f</li>
 <li>ALS &amp; IPX HTTP Proxy</li>
 </ol>
 <li>SMF &amp; UPF in HPLMN &amp; VPLMN</li>
 <li>Requirements related to Service Based Architecture</li>
 <li>Naming, addressing &amp; routing for 5G SA roaming</li>
 <ol>
 <li>SEPP load distribution</li>
 <li>SEPP administration, naming convention &amp; routing</li>
 <li>SEPP HTTP redirections</li>
 </ol>
 
 
 <h5>Technical Requirements &amp; Recommendations for Interworking &amp; Coexistence with E-UTRAN &amp; EPC</h5>
 <li>Interworking scenarios</li>
 <li>Coexistence scenarios</li>
 <li>Inter-RAT Handover</li>
 <li>Handover &amp; Access restriction between 5GC &amp; EPC</li>
 
 
 <h5>Technical Requirements &amp; Recommendations for Services</h5>
 <li>Network slicing</li>
 <li>Voice, Video &amp; Messaging</li>
 <li>Location support</li>
 <li>UE Route Selection Policy</li>
 
 
 <h5>Other Technical Requirements &amp; Recommendations</h5>
 <li>Access control</li>
 <li>IP Addressing</li>
 <li>DNN for IMS based services</li>
 <li>Emergency PDU Session</li>
 <li>Emergency Services Fallback</li>
 <li>Security</li>
 <li>Steering of Roaming in 5GS</li>
 
 
 <h5>Technical Requirements for QoS support</h5>
 <li>5G QoS model</li>
 <li>5G QoS profile</li>
 <li>QoS Control</li>

4G & 5G Roaming Scenarios & Procedures

<h3>OSPF training course description</h3>
 A detailed hands on examination of OSPF. Hands on sessions are used to reinforce the theory rather than teach specific manufacturer equipment. The course starts with a recap of reading routing tables and then jumps straight in with simple OSPF configuration. OSPF features are then studied and configured before moving onto how OSPF works within an area. Multi area OSPF is then studied before looking at OSPF operation in detail by analysing OSPF packets. Finally areas are covered again in more detail followed by troubleshooting. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Design OSPF networks.</li>
 <li>Design IP addressing schemes suitable for route summarisation.</li>
 <li>Troubleshoot OSPF networks.</li>
 <li>Describe the operation of OSPF.</li>
 </ul>
 <h5>
 OSPF training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Technical staff working with OSPF.
 
							<li>Prerequisites:</li>
							
 TCP/IP Foundation for engineers
 
							<li>Duration</li>
							
 3 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>OSPF training course contents</h3>
 <ul>
 <li>Basic routing and OSPF</li>
 Reading routing tables, routing protocols, What is
 OSPF? Process IDs, passive interfaces. Hands on Simple OSPF configuration. 
 <li>OSPF</li>
 History of OSPF, metrics, costs, convergence,
 Distance Vector vs. Link state routing protocols,
 IGPs, classless, OSPF features, load sharing, per
 packet/destination, OSPF authentication. Hands on Configuring OSPF features. 
 <li>OSPF within an area</li>
 How OSPF works, LSDB, LSDB benefits and
 disadvantages, LSA types, Type 1 and 2, LSA
 propagation, router IDs, hellos, configuring hellos,
 the exchange protocol. Hands on Investigating
 OSPF structures. 
 <li>Areas</li>
 Scalability, why areas? Area IDs, area 0, ABRs,
 ABR resilience, areas &amp; LSDBs, areas &amp; LSAs,
 Type 3 LSAs, virtual links. Hands on Multi area
 OSPF. 
 <li>Redistribution</li>
 Multiple routing protocols, common scenarios,
 routing distance, External LSAs, E1 and E2. Type
 4 LSAs. OSPF and default routes. Hands on
 Configuring static route redistribution. 
 <li>Route aggregation</li>
 Route summarisation. How to aggregate, ABR
 summarisation, ASBR summarisation. Hands on
 OSPF address summarisation. 
 <li>OSPF packet formats</li>
 OSPF packets, protocol stack, OSPF stages,
 packet flows, packet types, the OSPF header,
 multicasts, Hello, DDB, LS request, LS update,
 LS ACK, LSA header, LSA formats, neighbours,
 neighbour states, DRs, adjacencies, BDRs, DR
 election. Hands on Analysing OSPF packets,
 troubleshooting. 
 <li>OSPF network types</li>
 BMA, NBMA, Point to point links. Hands on
 Configuring OSPF over Frame Relay. 
 <li>OSPF stub areas</li>
 LSA types, area types, area architecture, stub
 areas, default routes, benefits and disadvantages
 of stub areas, TSSAs, NSSAs, Type 7 LSAs.
 Hands on Stub and TSSA configuration. 
 <li>The OSPF MIB</li>
 SNMP overview, MIB 2, the OSPF MIB, OSPF
 MIB groups, useful objects, OSPF traps. Hands on the OSPF MIB. troubleshooting. 
 <li>Summary</li>
 RFCs, OSPF design guidelines. 
 <li>OSPF variants (appendix)</li>
 OSPF on demand, MOSPF, multicast overview,
 Type 6 LSAs, OSPF for IPv6 (OSPFv3). 
 </ul>

Total OSPF for engineers

<h3>Definitive Ethernet switching course description</h3>
 A hands on comprehensive look at Ethernet switches
 with extensive coverage of VLANs. The course focuses
 on the technology and not any one manufacturers
 product enabling delegates to configure switches from
 any manufacturer. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Configure and troubleshoot switches using: 
 Console port 
 telnet 
 HTTP 
 TFTP 
 </li>
 <li>Configure and troubleshoot switch features such as: 
 Duplex/speed 
 Port based MAC security 
 Spanning Tree 
 Link aggregation 
 Tagged ports 
 </li>
 <li>Configure and troubleshoot VLANs. </li>
 </ul>
 <h5>
 Definitive Ethernet switching course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Technical staff.
 
							<li>Prerequisites:</li>
							
 Intro to data communications &amp; networking.
 
							<li>Duration</li>
							
 3 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Definitive Ethernet switching course contents</h3>
 <ul>
 <li>What is Ethernet?</li>
 LANs, network cards and cables, CSMA/CD,
 Ethernet frames, Ethernet evolution, 802.3. 
 Hands on: ping, Ethernet speeds, CSMA/CD.
 <li>Ethernet layer 2</li>
 Layer 2 functions, NICs, MAC addresses, unicasts,
 multicasts and broadcasts, frame formats. 
 Hands on: Configuring NICs, Analysing MAC addresses
 with Wireshark
 <li>IP and Ethernet</li>
 Relationship 
 Hands on: ARP.
 <li>What is a switch?</li>
 Switches connect multiple devices, switches versus
 hubs, simultaneous conversations, switches work
 at layer 2, the forwarding database, how the
 forwarding database is built, broadcast and
 collision domains 
 Hands on: Difference between
 hubs and switches.
 <li>Switch configuration</li>
 Switch configuration
 Managed/unmanaged switches, configuration
methods, reasons to configure switches. Console
ports, HyperTerminal (and alternatives). 
 Hands on: Using the console port to troubleshoot and
 configure switches.
 <li>Switches in more detail</li>
 
 Latency, forwarding mechanisms, switch fabrics. 
 Hands on: Using telnet and HTTP to switches.
 <li>Ethernet extensions</li>
 Auto negotiation, Power over Ethernet. 
 Hands on:Configuring and troubleshooting switch ports:
 Speed, duplex and security.
 <li>Redundant links </li>
 Loops, broadcast storms, STP, BPDU format, STP
 convergence. 
 Hands on: Tracking blocked ports.
 STP convergence.
 <li>Backbone links</li>
 Architectures, link aggregation, LACP, load
 sharing, resilience. 
 Hands on: fail over times.
 <li>VLANs</li>
 Virtual versus physical LANs, Why have VLANs?
 Broadcast domains, Creating VLANs, Assigning
 ports to VLANs. 
 Hands on: Analysing the effect of
 VLANs on traffic. 
 <li>Enterprise VLANs</li>
 VLANS are internal, multiple VLANs, Load
 balancing, Default VLAN, VLAN registration
 protocols: VTP, GVRP, MVRP. 
 Hands on: VLANs
 on multiple switches.
 <li>Tagging/Trunking </li>
 Reason for tagging, terminology, tagging process,
 802.1Q, Tag format, VLAN stacking. 
 Hands on: Configuring and troubleshooting tags.
 <li>STP variants</li>
 RSTP, Common STP, Multiple STP, PVST, ring
 alternatives. 
 Hands on: RSTP.
 <li>Inter VLANs</li>
 Layer 3 switching, IP addressing rules,
 Interconnecting VLANs. 
 Hands on: Routing
 between VLANs. 
 <li>Troubleshooting Ethernet</li>
 Methods, tools, locating faults, layer 1 issues, layer 2
 issues 
 Hands on: Fixing the network.
 </ul>

Definitive Ethernet switching for engineers

<h3>MPLS training course description</h3>
 A hands-on introduction to MPLS covering the basics of what MPLS is and how to configure it, through to more advanced concepts such as MPLS VPNs and traffic engineering with MPLS.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Describe MPLS</li>
<li>Explain how MPLS works</li>
<li>Describe the interaction between OSPF/IS-IS/BGP and MPLS</li>
<li>Describe MPLS traffic engineering</li> 
 </ul>
 <h5>
 MPLS training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone working with MPLS.
 
							<li>Prerequisites:</li>
							
 IP Routing 
 BGP
 
							<li>Duration</li>
							
 3 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>MPLS training course contents</h3>
 <ul>
 <li>What is MPLS?</li>
 
 What does MPLS stand for? What is MPLS? Core
MPLS, MPLS and the 7 layer model, MPLS is a
protocol, MPLS is a standard, MPLS runs on
routers, MPLS history, Why MPLS? For service
providers, For enterprises. 
 <li>MPLS Architecture
</li>
 Label Switch Routers, two types of LSR, PE and
P router roles, FEC, swapping labels, MPLS
packet format, Loops, TTL control. Hands on:
Building the base network. Enabling MPLS.
					Simple testing and troubleshooting of MPLS.
 <li>Label distribution</li>
 Label review, label switch path, label distribution
methods, piggybacking, Label distribution
Protocols, LDP, LDP operation, LDP packets,
discovery messages, session messages,
advertisement messages, notification message,
Label Information Base, routing tables, the LFIB,
MPLS forwarding, penultimate hop popping,
handling labels, LSP control modes, when to
distribute labels, how long to keep labels,
aggregation, label merging. Hands on: LDP traffic
analysis.
 <li>MPLS TE and QoS</li>
 What is MPLS TE? Why TE? TE versus shorted
path, how MPLS TE works, CR-LDP, OSPF-TE,
IS-IS-TE, TE with BGP, RSVP-TE, MPLS Fast
reroute, MPLS QoS. Hands on: Enabling
MPLS-TE.
 <li>BFD</li>
 BFD, hello the BFD protocol.
				<li>MPLS VPN</li>
				What is a VPN? MPLS VPN types, MPLS VPN
comparison, MPLS L3 VPN, VRFs, MBGP, MPLS
VPN architecture, VRF RD, VRF RT, the label
stack, L2 VPNs, VPWS, AToM, VPLS. Hands on:
MPLS L3 VPN setup, troubleshooting.
 
 </ul>

Concise MPLS for engineers

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
The smart meter or smart grid represents the next-generation electrical power system. This system uses information, data &amp; communication technology within generation, delivery and consumption of electric energy. This 4-day course will equip you with the innovations that are shaping the power generation and distribution systems and will cover topics ranging from Smart Metering Architecture, Cybersecurity, Smart Grid Systems and Power Line Communications.
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
By participating in this course, you will be able to:
<ul>
<li>Comprehend the Smart Grid and Smart Meters architecture</li>
<li>Review latest trends and challenges within the Smart Grid Technology</li>
<li>Perform analysis on smart electronic meters</li>
<li>Comply with regulatory and metering standards</li>
<li>Recognize the importance of cybersecurity in smart grids</li>
<li>Maximize efficiency, reliability, and longevity of your smart meters and equipment</li>
<li>Gain valuable insights into power quality and harmonics</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
This course will greatly benefit the following groups but not limited to:
<ul>
<li>Smart Grid managers and engineers</li>
<li>Smart Meters managers and engineers</li>
<li>Power plant managers</li>
<li>Outage managers</li>
<li>Maintenance and operations engineers</li>
<li>Power regulatory personnel</li>
<li>Transmission managers and engineers</li>
<li>Distribution managers and engineers</li>
<li>IT managers</li>
<li>Renewable energy managers and engineers</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.
Course Duration: 4 days in total (28 hours).
Training Schedule
0830 - Registration 0900 - Start of training 1030 - Morning Break 1045 - Training recommences 1230 - Lunch Break 1330 - Training recommences 1515 - Evening break 1530 - Training recommences 1700 - End of Training
The maximum number of participants allowed for this training course is 25.
This course is also available through our Virtual Instructor Led Training (VILT) format.
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
Your expert course leader is a professional engineer with extensive experience in power system studies, substation design field-testing, and EHS programs settings for Mining and Electrical Utilities sectors. He was formally the Engineering Manager at GE Canada in Ontario. He received his M.Sc. in electrical engineering from the University of New Brunswick and his MBA from Laurier School of Business in Waterloo. He has managed and executed more than 150 engineering projects on substation design EMF audits and power system studies and analyses, EMF audits and grounding audits, for major electrical utilities, mines, oil and gas, data centers, industrial and commercial facilities in Canada and the U.S. He is a certified professional engineer in the provinces of Ontario and Alberta.
He has various IEEE publications, has served as a technical reviewer for many IEEE journals in power systems and control systems, and is the chair of the Industry Application Chapter (IAS) for IEEE Toronto Section. He remains a very active member for the IEEE substation committee of IEEE Std. 81 ground testing (WGE6) and IEEE Std. 80 ground design (WGD7). A certified electrical safety trainer by GE Corporate and a Canadian Standard Association (CSA) committee member at the mining advisory panel for electrical safety, he also taught many technical courses all over Canada to industrial customers, electrical consultants as well as to electrical utilities customers.
Highlighted Projects:
<ul>
<li>Various Power System Studies for 345/230 kV Stations - Nova Scotia Power (EMERA)</li>
<li>RF audits for Telecom tower and antennas - Cogeco/Rogers Mobile</li>
<li>Power System analysis - Powell Canada</li>
<li>Structural/Geotechnical Design and upgrades - Oakville Hydro</li>
<li>Underground Cables testing and sizing - Plan Group</li>
<li>Relay programming and design optimization - Cenovus Canada</li>
<li>Different Arc Flash Analysis and BESS Design - SNC Lavalin</li>
<li>Environmental site assessment (ESA) Phase I/II for multiple stations - Ontario</li>
<li>Electromagnetic compatibility (EMC) assessment for Toronto LRT expansion - MOSAIC</li>
<li>Battery energy storage system (BESS) installation at City of London - Siemens Canada</li>
<li>EMF audits for 500 kV Transmission Lines - Hydro One</li>
<li>EMF audits for 500 kV Transmission Lines - Hydro Quebec</li>
<li>AC interference for 138 kV line modeling and mitigations - HBMS Mine</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. 
Request for further information post training support and fees applicable
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
 </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Smart Metering & Power Quality Analytics

Team of 10, pp

Normal Fee, pp

Manchester

Slough

Portsmouth

Bingley

Cardiff

Milton Keynes 

Nottingham

Birmingham

Bedford

Liverpool 

<div data-testid="richTextElement" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">ONLINE STUDY - In your own time (approx. 6 hours study time) +CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours) Awarding Body:&nbsp;Open College Network (OCN) Credit for LearningAward Level:&nbsp;Level 3 (Advanced Level) - Ireland Level 5CPD Certified:&nbsp;Yes (CPD Accreditation)Minimum Age:&nbsp;18 (16 with parental consent)Entry requirements:&nbsp;None. (English Level 2 desirable)Training Locations:&nbsp;Study online + Classroom&nbsp;OCN Accredited at UK Level 3 (Ireland Level 5) &nbsp;PART 1 - Theory:&nbsp;Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc. PART 2 - Skills and Practical Development: Safely and competently set up and maintain a Peripheral IV Infusion. Attend a classroom location to complete your practical training. <div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"> Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above. </div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">Course Itinerary:</div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"> </div>PART 1 - THEORY (ONLINE) M1 - Peripheral IV Cannulation - Introduction: Definitions - understanding terminology relating to PIVC. IV Therapy and NMC guidelines. M2 - Legal &amp; Professional Responsibilities: Legal Obligations and Accountability. Criminal, Civil and Contractual law in Healthcare. Vicarious Liability and your Duty of Care. M3 - Anatomy &amp; Physiology: Sites appropriate to IV cannulation. Hand vs. arm. Advantages and disadvantages of relevant veins. An overview of Homeostasis and Fluid Balance. M4 - Hygiene and Infection Prevention &amp; Control (IPC): Reducing healthcare-associated infections. Keeping Safe. Bloodborne Pathogens and Work Practice Controls. Standard Precautions. Waste Disposal. Needle-stick injuries. M5 - Indications and Advantages: When to cannulate, infusion types and benefits over alternative infusion routes. Continuous and intermittent infusion. Prophylactic use before procedures and in unstable patients. Contraindications. M6 - Equipment: Cannula types, sizes and colour coding. How to select appropriate size. Equipment overview for total procedure. M7 - Vein Choice for Cannulation: Correct vein selection. Which veins to avoid. How to manage an unsuccessful cannulation. M8 - Procedures: Full procedure for cannulation including correct documentation. M8: Guide to Cannulation - revision M8: Video - Recap with full procedure M9 - Contraindications: When inappropriate to cannulate including patients with specific health conditions. M10 - Complications: A detailed look at potential complications during and after cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions. PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED BEFORE JOINING US FOR YOUR PRACTICAL TRAINING PART 2 (CLASSROOM: 1 - Welcome, introductions and overview: Classroom - registration and introductions. Virtual Classroom - audio/visual checks and registration. 2 - Legal &amp; Professional Responsibilities: Overview and discussion. 3 - Anatomy - key points (appropriate to PIVC): Arteries and veins. Selecting an approprate site. Sites to avoid and &ldquo;first choice&rdquo; sites. 4 - Cannulae - selection and types: A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD. 5 - Complications: Complications of pVAD insertion including examples of infiltration, haematoma, extravasation and transfixation. 6 - VIP Score: Understanding and using the Visual Infusion Phlebitis score. 7 - Equipment - overview: We take a look at all essential equipment required for PIVC. 8 - PRACTICAL SESSIONS: Multiple practical sessions throughout the session. 9 - Fluids: The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann&rsquo;s solution, Colloids (and risks), blood products. 10 - Infusion Rates: Calculating infusion rates and drops per minute. This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.&nbsp;<div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)</div></div>

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Geopace Training

Allied Health Professions (AHP)

Intravenous Cannulation

Aesthetics

Medicine & Nursing

Venepuncture & Cannulation

Learn how to cannulate ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced) - Ireland Level 5

    CPD Accredited - The CPD Certification Service

    Classroom or Virtual Classroom options

    Covers all steps for cannulating in arm or hand

    Practise on artificial arms and fake blood!

    Essential qualification for all IV therapies

    Phlebotomy training desirable but not essential

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Peripheral I.V. Cannulation Course (GPT008)

Key Facts:


COURSE 1: PERIPHERAL I.V. CANNULATION COURSE (GPT008)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.

 
Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)
Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.





Key Facts:


COURSE 2: VACCINATION / INJECTION COURSE (GPT601)



ONLINE STUDY - In your own time (approx. 5-6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)


Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (FDSc Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)



SUITABLE FOR:
- MEDICAL / HEALTHCARE (trainees and professionals)
- AESTHETIC THERAPISTS (all levels)

 
This Vaccination / Injection Course is a nurse or paramedic-led half-day session covering all essential theory and practical skill-sets required to deliver effective Intramuscular, Intradermal and Subcutaneous injections / vaccinations.
 
PART 1 - THEORY (online)
Delegates will fully understand the theory and will be able to demonstrate they can identify the correct patient, gain consent and safely administer a vaccine or injection, conforming to WHO and Skills for Health recommended standards.
 
Itinerary:
M01 Course Overview and brief history
M02 Infection Protection Control
M03 Professionalism and Effective Communication
M04 Understanding injection procedures
M05 Why do we vaccinate?
M06 The immune system and how vaccines work. Vaccine types and composition.
M07 The National Vaccine Policy & Schedule
M08 Vaccine preventable diseases
M08A – Covid-19 Update
M09 Vaccines - understanding the reconstitution process
M10 Storage and Handling – understanding correct procedures and protocols
M11 Equipment – Syringes and Syringe Types, Needles and Needle Types, SDV (Single-Dose Vials), MDV (Multi-Dose Vials), Pre-Filled Syringes, Gloves and PPE.
M12 Vaccination sites, techniques and anatomical site selection
i) Intramuscular (IM) Injection
ii) Subcutaneous (SubCut) Injection
iii) Intradermal (ID) Injection
M13 Legal requirements, Consent and Standard Operating Procedures
M14 Adverse Reactions and Basic Life Support Guidance
M15 Record keeping & Documentation
 
PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING
PART 2 - CLASSROOM (am, pm or evening sessions)
3 - 4 hours skill-set development with practical demonstrations and hands-on experience performing Intramuscular, Intradermal and Subcutaneous Injections.
 


How do I attend?

EITHER -
CLASSROOM OPTION - Complete your theory training online at home or work, then attend one of our scheduled classroom locations, completing your Peripheral IV Cannulation Course and your Injection Course on the same day.
Our Peripheral IV Cannulation Course and Injection Course training kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available for you to add at time of booking. Training kits mirror the same equipment and supplies used in the classroom and both include detailed video instructions, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for your one full day to complete your cannulation and injection course training.

Our Virtual Classroom option includes two very comprehensive training kits - one for your cannulation course and one for your injection course. Kits are included at no charge (normally £79.95 and £39.95 respectively) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Additional Courses suitable for Aesthetic Therapists:
Our popular Introduction to Phlebotomy Course also trains you to perform venepuncture at Advanced Level. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Advanced Level.
If you already have phlebotomy skills (or decide to enroll on our phlebotomy training course) then you will be able to offer your clients Platelet-Rich Plasma (PRP) Treatments, also known as Vampire Facials. Our PRP (Vampire Facials) Course trains you in the harvesting, preparation and treatment of PRP for application to your clients as required. We offer both classroom and virtual classroom options for this course and a comprehensive Practise@Home Training Kit is provided for our virtual classroom option. Both options are accredited at Foundation Degree Level.

If you would like to "mix and match" your training dates and/or locations or would like to build your own package of courses then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are dually accredited and are Skills for Health & WHO compliant.

Medical Aesthetics

Allied Health

Platelet-rich plasma (PRP)

Aesthetic Practitioner

Facial Aesthetics

THIS COURSE PACKAGE INCLUDES:
1: PERIPHERAL I.V. CANNULATION - IV THERAPIES COURSE (GPT008)
2: VACCINATION / INJECTION COURSE (GPT601)

Learn how to administer injectables and intravenous therapies ...

FAST-TRACK YOUR AESTHETICS TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% Multi-Course Discount

    Cover all stages from Level 1 through to Level 4 (FDSc)

    Cover your theory training online

    Complete your advanced practical training in 1 day

    Practical training in Classroom or Virtual Classroom

    Comprehensive Practise@Home training kits for VC

    Awards 2 accredited qualifications

    Dual Accreditations for all courses

    Covers all steps required to safely perform injectables

    Covers all steps required to safely perform IV therapies

    Practise IV on artificial arm with fake blood

    Practise injection techniques on realistic injection pads

    Learn beginner to advanced skills and techniques

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Aesthetic Therapy Training - Beginner to Advanced PACKAGE

Burnley

This course is the next step on your Reiki journey if you would like to be able to use Reiki at a higher level and work with clients/familyThis level 2 Reiki course is for you if you want to give Reiki healing at a more intense level or give healing treatments to others. Here you are introduced to the Reiki symbols for the first time<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Cho Ku Rei (power symbol)</li><li fr-original-style="" style="box-sizing: border-box;">Sei He Ki (emotional symbol)</li><li fr-original-style="" style="box-sizing: border-box;">Hon Sha Ze Sho Nen (distance healing symbol)</li></ul>What will I learn on this course:-<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">How to use the Reiki sacred symbols</li><li fr-original-style="" style="box-sizing: border-box;">What is Distance Healing and how to use the distance symbol so you can send Reiki healing to others.</li><li fr-original-style="" style="box-sizing: border-box;">Have increased level 2 Reiki energy</li><li fr-original-style="" style="box-sizing: border-box;">How to practice Self-Healing using the increased energy</li><li fr-original-style="" style="box-sizing: border-box;">Hand positions when healing others</li><li fr-original-style="" style="box-sizing: border-box;">The 21 day Cleansing Process explained</li><li fr-original-style="" style="box-sizing: border-box;">Professional Ethics</li><li fr-original-style="" style="box-sizing: border-box;">Question and answer session</li></ul>You will be initiated to the Reiki energy by a level 2 attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course. I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.The course can be booked online here and you will receive instructions on how to access the course.I look forward to meeting you and sharing my knowledge and experience of Reiki with you.What this course offers you<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Individual Support - During and after your course</li><li fr-original-style="" style="box-sizing: border-box;">Practical Experience - Step by step training is given so that you can gain valuable experience using Reiki</li><li fr-original-style="" style="box-sizing: border-box;">Energy Perception &ndash; You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel</li><li fr-original-style="" style="box-sizing: border-box;">Personal Growth - You will discover for yourself the increased level of Reiki healing and be able to use its methods of healing on others and have paying clients if you wish&nbsp;</li></ul>Why a Level 2 Course?&nbsp;Reiki at Level 2 is the level of training which is needed to practise Reiki healing professionally and have paying clients. Often reflexologists, aromatherapists and other complementary therapists add reiki healing to their range of healing skills that they offer their clients.&nbsp;However it is not just for those who have clients it is also a powerful self-development technique for your own personal healing experience and to share with family/friends and give them the benefit of well-being.A certificate at Reiki Level One is needed for you to enrol on this course and I am happy to accept students who have trained elsewhere with another Reiki Master.The Reiki Two course is taught live on line using Zoom.Testimonials:- What other students who have attended my courses are saying&nbsp;Level Two Course&ldquo;She explains everything so well and makes it easy to understand and connect to the reiki. This is my 2nd course I&rsquo;ve done with Margaret&rdquo; (Louise B)."Thank you, I thoroughly enjoyed the course." (Beverley S)This is a very well organized and informative course! (Georgie P)

Margaret Cook - Learn More About Reiki

Energy Healing

Reiki

Reiki Healer

I am a Reiki Teacher in Manchester and one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course. I teach all three levels of Reiki courses, level 1 reiki. level 2 reiki and reiki master level 3

Reiki Level 2 Practitioner Online Course

<div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><h2 fr-original-style="" style="box-sizing: border-box;">INTRAMUSCULAR, INTRADERMAL &amp; SUBCUTANEOUS INJECTION COURSE (GPT601) CLASSROOM or VIRTUAL CLASSROOM (with online theory)</h2></div><section fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-testid="columns" fr-original-style="" style="box-sizing: border-box;"><div data-hook="bgLayers" data-motion-part="BG_LAYER" fr-original-style="" style="box-sizing: border-box;"><div data-testid="colorUnderlay" fr-original-style="" style="box-sizing: border-box;"></div><div data-motion-part="BG_MEDIA" fr-original-style="" style="box-sizing: border-box;"></div></div><div data-mesh-id="comp-kl8214n52inlineContent" data-testid="inline-content" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214n52inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Learn how to administer vaccines or injections ...&nbsp;</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Nationally Recognised Qualification</li><li fr-original-style="" style="box-sizing: border-box;">Includes IM, ID and Sub-Cut Injection methods</li><li fr-original-style="" style="box-sizing: border-box;">OCN Accredited - Level 4 (Foundation Degree - FDSc)</li><li fr-original-style="" style="box-sizing: border-box;">Covers all steps to safely perform a vaccination</li><li fr-original-style="" style="box-sizing: border-box;">Use same techniques and skills for aesthetic therapies</li><li fr-original-style="" style="box-sizing: border-box;">Includes B12, Vitamin C and other treatments</li><li fr-original-style="" style="box-sizing: border-box;">Essential qualification for all injections</li><li fr-original-style="" style="box-sizing: border-box;">Basic understanding of English language required</li><li fr-original-style="" style="box-sizing: border-box;">OPEN TO ALL APPLICANTS</li></ul><div data-testid="richTextElement" id="isPasted" fr-original-style="" style="box-sizing: border-box;">About this course</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Learning Outcomes</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">After the course</div><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">PART 1 - Theory: complete online at home or work and download a certificate of completionPART 2 - Skills and Practical Development: Attend in the Classroom or Virtual ClassroomVaccination - all essential vaccines including Covid-19, Flu and other annual vaccinesInjections - Aesthetics - B12, Vit C etc.78 UK &amp; Eire training locationsOCN Accredited at Level 4 (FDSc)Medical training standards throughoutSkills for Health &amp; WHO compliantLearning Outcomes<div data-mesh-id="comp-kl8214o43inlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214o43inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Train up to point of first vaccination or injection&nbsp;All theory and practical skills required to perform a safe procedureCovers all essential theory and skill-set development to meet medical standardsUnderstand the procedures used to set up &nbsp;a manage and administer a vaccinePost-injection management and how to avoid critical complicationsCorrect client care and aftercareIncludes legal, consent and documentationAfter the course<div data-mesh-id="comp-kl8214oainlineContent" data-testid="inline-content" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-mesh-id="comp-kl8214oainlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Safely and competently administer a vaccine or drug treatment (ie. B12)Correct client management before, during injection and safe after-careUnderstanding equipment types and appropriate choicesUnderstand vaccine management controlAppreciate legal and professional responsibilitiesOffer injection therapies to clients - vitamin supplementsAdminister in hospitals, GP Surgeries and Outreach Centres</div></div></div></div></div></div></div></div></div></div></div></section>

INTRAMUSCULAR, INTRADERMAL & SUBCUTANEOUS INJECTION COURSE (GPT601)
CLASSROOM or VIRTUAL CLASSROOM (with online theory)
Learn how to administer vaccines or injections ... 
Nationally Recognised Qualification
Includes IM, ID and Sub-Cut Injection methods
OCN Accredited - Level 4 (Foundation Degree - FDSc)
Covers all steps to safely perform a vaccination
Use same techniques and skills for aesthetic therapies
Includes B12, Vitamin C and other treatments
Essential qualification for all injections
Basic understanding of English language required
OPEN TO ALL APPLICANTS
About this course
Learning Outcomes
After the course
PART 1 - Theory: complete online at
home or work and download a certificate of completion
PART 2 - Skills and Practical Development: Attend in the Classroom or Virtual Classroom
Vaccination - all essential vaccines including Covid-19, Flu and other annual vaccines
Injections - Aesthetics - B12, Vit C etc.
78 UK & Eire training locations
OCN Accredited at Level 4 (FDSc)
Medical training standards throughout
Skills for Health & WHO compliant
Learning Outcomes
Train up to point of first vaccination or injection 
All theory and practical skills required to perform a safe procedure
Covers all essential theory and skill-set development to meet medical standards
Understand the procedures used to set up a manage and administer a vaccine
Post-injection management and how to avoid critical complications
Correct client care and aftercare
Includes legal, consent and documentation
After the course
Safely and competently administer a vaccine or drug treatment (ie. B12)
Correct client management before, during injection and safe after-care
Understanding equipment types and appropriate choices
Understand vaccine management control
Appreciate legal and professional responsibilities
Offer injection therapies to clients - vitamin supplements
Administer in hospitals, GP Surgeries and Outreach Centres

Immunisation & Vaccination

Immunisation

Injection

Vaccination

Vaccinator

Learn how to administer vaccines or injections ...

    Nationally Recognised Qualification

    Includes IM, ID and Sub-Cut Injection methods

    OCN Accredited - Level 4 (Foundation Degree - FDSc)

    Covers all steps to safely perform a vaccination

    Use same techniques and skills for aesthetic therapies

    Includes B12, Vitamin C and other treatments

    Essential qualification for all injections

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Vaccination / Injection Course (GPT601)

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Health & Safety

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Kent

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Dover

ECS Card Health & Safety Course Liverpool

<div id="course-pills-1">Duration5 Days30 CPD hoursThis course is intended forThe primary audience for this course is any IT, facilities or data centre professional, who are involved in the design/build, renovation or relocation of a mission-critical data centre.OverviewThis 5-day course is designed to prepare participants to analyse a given business case and perform technical evaluation for a project plan and a set of designs for the implementation of a mission critical data centre. The course also engages participants in product evaluations and demonstrates how to select equipment and develop equipment test scripts (IET) and integrated performance and validation testing (IPVT). CDCEÂ© builds upon knowledge gained in CDCP and CDCS courses. Participants who pass the exam will join the industry's elite data centre project design experts. CDCEÂ© is the highest level training in the EPI Design and Build training track under the EPI Data Centre Training Framework. Participants must hold a valid CDCS certificate in order to be able to register for the CDCE class.CDCEÂ© is the premier certification for data centre professionals in the data centre design/build and related fields.</div><div id="course-pills-2"><h4>Data Centre Life Cycle</h4><ul><li>Data centre lifecycle stages and phases Exercise: Stage/Phase/Milestone/Document mapping</li></ul><h4>Design Preparation</h4><ul><li>Creation of a SON ? Statement Of Need Technology review Conceptual sizing How to calculate for computer room space How to calculate facility space How to calculate incoming power Exercise: Conceptual sizing building and power Analysing capacity of existing facility Analysing investment options Site selection Permits and approvals Exercise: Site selection Conceptual design Budget and project timeline Business case preparation Project delivery structure Project management options Project manager and team</li></ul><h4>Design Planning</h4><ul><li>OSRA?Operational Systems Requirement Analysis TFRA?Technical Facilities Requirement Analysis Operations and maintenance review RFP?Request For Proposal process Vendor selection</li></ul><h4>Design Development</h4><ul><li>Project planning Design development PDR ? Preliminary Design Review Equipment selection FDR/V ? Final Design Review/Validation Exercise: Full design validation of power, cooling, floor plans, fire suppression Design freeze and LLTI Creation of construction documents BOM/BOQ ? Bill Of Material/Bill Of Quantity Exercise: Equipment selection</li></ul><h4>Acquire</h4><ul><li>Requirements of purchase orders Shipping terms FWT/FAT ? Factory Witness Test/Factory Acceptance Test Sequencing Incoming goods inspection and handling Asset management</li></ul><h4>Construct</h4><ul><li>Temporary essential services Erection of the building Permanent essential services Building inspection Snag list COF?Certificate Of Fitness</li></ul><h4>Fit-Out</h4><ul><li>Fit-Out Builders cleaning As-Built Drawings</li></ul><h4>Test &amp; Commissioning</h4><ul><li>IET?Individual Equipment Test IPVT/IST?Integrated Performance Verification Test/Integrated Systems Test Common mistakes with IET/IPVT Deep cleaning Exercise: IET/IPVT scripting</li></ul><h4>Hand-Over</h4><ul><li>Facility hand-over requirements and documents PCC?Practical Completion Certificate DLP?Defect Liability Period Defect Management ICT Systems Installation ICT Systems Testing Hand-Over/DLP Expiry FCC?Final Completion Certificate</li></ul><h4>Retirement</h4><ul><li>Reasons and definitions of retirement Building the business case and project plan Sequencing Transfer of site Demolishing of site Legal matters FCC?Final Completion Certificate</li></ul><h4>Exam: Certified Data Centre Expert (CDCEÂ©)</h4><ul><li>The CDCEÂ© exam is in two parts: Part A is a 90-minute closed book exam, with 60 multiple-choice questions. For Part A, the candidate requires a minimum of 45 correct answers to pass the exam. Part B is a 90-minute closed book exam, with 25 open questions. For Part B the candidate needs to obtain a minimum of 75% to pass.</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4> Nexus Humans Certified Data Centre Expert (CDCE) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Certified Data Centre Expert (CDCE) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.</div>

1791 Courses in Cardiff

Definitive VoIP for engineers

By Systems & Network Training

Oracle SQL foundation

By Systems & Network Training

LTE Architecture and Protocols

By Systems & Network Training

5G demystified

By Systems & Network Training

Promoting Best Practice in Asthma and Anaphylaxis Training (Train the Trainer)

By Guardian Angels Training

4G & 5G Roaming Scenarios & Procedures

By Systems & Network Training

Total OSPF for engineers

By Systems & Network Training

Definitive Ethernet switching for engineers

By Systems & Network Training

Concise MPLS for engineers

By Systems & Network Training

Smart Metering & Power Quality Analytics

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location