Name: The Impact of Electric Vehicles (EVs) on the Grid
Price: 2196 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans. This course provides also a comprehensive explanation of all boiler combustion control systems including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system as well as their tuning methods. All boiler control systems are covered as well in this course including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, boiler-turbine coordinated control, etc.</p>
<p>The course provides also detailed explanation of Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code). The burner management systems (BMS) and examples of boiler permissive starting logic and protective tripping logic will be explained thoroughly. The various methods used to calculate the boiler efficiency are covered in detail in this course including the direct and indirect methods. All the factors which affect the efficiency and emissions of pulverized coal boiler and CFB boiler will be explained thoroughly.</p>
<p>The course covers also all the methods used to improve the efficiency of pulverized coal boilers and CFB boilers including improvement to their combustion efficiency and control systems performance.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Boiler Combustion Equipment and Systems:</span></strong><span> Gain an in-depth understanding of all boiler combustion equipment and systems including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans</span></li>
<li><strong><span>Boiler Combustion Control Systems:</span></strong><span> Gain a thorough understanding of all boiler combustion control systems for pulverized coal boilers, and CFB boilers including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system</span></li>
<li><strong><span>Boiler Conventional Control Systems:</span></strong><span> Gain an in-depth understanding of all boiler conventional control systems including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, and boiler-turbine coordinated control</span></li>
<li><strong><span>Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code):</span></strong><span> Learn about NFPA 85 code and ANSI/ISA-77-44-01-2007 code</span></li>
<li><strong><span>Burner Management System and Boiler Permissive Starting Logic and Protective Tripping Logic:</span></strong><span> Gain an in-depth understanding of burner management system and boiler permissive starting logic and protective tripping logic</span></li>
<li><strong><span>Boiler Efficiency Calculations:</span><span> Learn how to calculate the boiler efficiency using the direct and indirect methods</span></strong></li>
<li><strong><span>Factors Affecting the Efficiency and Emissions of Boilers: </span></strong><span>Understand all the factors which affect the boiler efficiency and emissions</span></li>
<li><strong><span>Methods Used to Improve the Efficiency of Boilers:</span></strong><span> Learn about all the methods used to improve the efficiency of pulverized coal boilers, and CFB boilers including improvement to their combustion efficiency and control systems performance</span></li>
<li><strong><span>Boiler Instrument and Piping Diagrams:</span></strong><span> Gain an in-depth understanding of all boiler instrument and piping diagrams</span></li>
<li><strong><span>CFB and Pulverized Coal Boilers Equipment and Systems:</span></strong><span> Learn about various types of equipment and systems used in CFB and pulverized coal boilers including economizers, steam drum, superheaters, air preheaters, ammonia injection systems, etc.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>COMBUSTION ENGINEERING FOR COAL FIRED POWER PLANTS MANUAL (includes practical information about combustion engineering for coal fired power plants - 550 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Combustion Engineering for Coal Fired Power Plants

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will provide a comprehensive understanding of the design of circulating fluidized bed (CFB) boilers. The design of all CFB boiler components and equipment including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves will be covered in detail. All potential operating problems and major operating problems, corrective actions and maintenance required for CFB boilers will be covered thoroughly.</p>
<p>This course will focus on designing CFB boilers that have the highest efficiency, and maximum longevity and capacity factor. All the common problems encountered in CFB Boilers will be discussed in detail.This includes thermally induced failures, anchor system induced failures, water walls tube failures, NMEJ damages, clinker formation, refractory damages, APH tube chock-up, erosion and corrosion. The solutions to each of these problems will be presented. All repair and refurbishment methods, preventive and predictive maintenance required for CFB boilers will be covered in-depth.</p>
<p>Several studies have confirmed that CFB boilers are the best method for power generation.This is due to their fuel flexibility, and lowest electricity cost among all types of boilers. This technology is in great demand due to various other advantages such as lower emissions as compared to other types of boilers and has a carbon footprint well below the norms laid down by the World Bank emission requirements.</p>
<p>This course is a MUST for anyone who is involved in the design, operation or maintenance of circulating fluidized bed boilers, because it covers how these boilers are designed and provides guidelines and rules that ensure the CFB boilers have great performance. This course will also provide up-dated information in respect to the design of supercritical once-through CFB boilers and ultra supercritical CFB boilers.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><span><strong>Circulating Fluidized Bed Boiler Design:</strong> </span><span>Gain a thorough understanding of the best design methods of circulating fluidized bed boilers.</span></li>
<li><span><strong>Design of Circulating Fluidized Bed Boiler:</strong> Components and Systems</span><span>: Learn</span> <span>all the techniques used to design CFB boiler equipment and systems including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves.</span></li>
<li><strong><span>Design of Circulating Fluidized Bed Boiler to Achieve Highest Efficiency, and Best Performance and Economics</span></strong><span><strong>:</strong> Gain a thorough understanding of all the methods used to design CFB boilers having the highest efficiency, longevity and capacity factor as well as best economics.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Equipment:</span></strong><span> Learn about various equipment of circulating fluidized bed boilers including: furnaces, cyclones, economizers, superheaters, reheaters, ammonia injection systems, electrostatic precipitators, polishing dry scrubbers, fuel and sorbent feeding systems, bottom ash handling and extraction systems and materials.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Environmental Emissions:</span></strong><span> Learn about the monitoring and control of environmental emissions from circulating fluidized boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation and control systems of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Reliability and Testing:</span></strong><span> Increase your knowledge of predictive and preventive maintenance, reliability and testing of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Selection and Applications: </span></strong><span>Gain a detailed understanding of the selection considerations and applications of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Maintenance:</span></strong><span> Learn all the maintenance activities required for circulating fluidized bed boilers, to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Refurbishment, and Life Extension Methods: </span></strong><span>Learn about life cycle cost, profitability, refurbishment, and life extension methods for all types of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Commissioning: </span></strong><span>Understand all the commissioning requirements of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Codes and Standards: </span></strong><span>Learn all the codes and standards applicable for circulating fluidized bed boilers.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Design of Circulating Fluidized Bed Boiler manual (600 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Design Of Circulating Fluidized Bed Boilers

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Identifying and correcting the root cause of failures in boilers and steam power plant equipment is essential to help reduce the chance of future problems. A comprehensive assessment is the most effective method of determining the root cause of a failure. For example, a tube failure in a boiler is usually a symptom of other problems. To fully understand the root cause of the failure, one must investigate all aspects of boiler operation leading to the failure in addition to evaluating the failure itself. When a boiler tube failure occurs, the root cause of the failure must be identified and eliminated.</p>
<p>This 5 full-day course starts by providing an in-depth understanding of root cause analysis methodology. This includes how to identify the problem, contain and analyze the problem, define the root cause of the problem, define and implement the actions required to eliminate the root cause, and validate that the corrective actions prevented recurrence of the problem. Many practical examples on how to apply root cause analysis for various industrial problems are discussed in detail.</p>
<p>The course then provides an in-depth explanation of all failure mechanisms that occur in steam power plants including corrosion, erosion, creep, cavitation, under-deposit attacks, stress corrosion cracking, hydrogen embrittlement, flow accelerated corrosion, etc. This course also provides a thorough explanation of all the failure mechanisms that occur in boilers and steam power plant equipment including steam turbines, condensers, feedwater heaters, etc. The symptoms of the failures, possible causes, components typically affected and solutions are also provided in this course. This includes boiler waterside, fireside and general boiler failure mechanisms as well as all the causes and prevention of all steam turbine failures, condensers, and feedwater heaters. The course also includes detailed study of many case histories of failures in boilers, steam turbines, condensers and feedwater heaters.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Electrical Equipment Testing and Maintenance: </span></strong><span>Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</span></li>
<li><strong><span>Root Cause Analysis Methodology:</span></strong><span> Understand root cause analysis methodology including: identification of the problem, defining the problem, understanding the problem, identification of the root cause of the problem, providing corrective action, and monitoring the system.</span></li>
<li><strong><span>Applying the Root Cause Analysis Method to Industrial Problems:</span></strong><span> Learn by studying many practical examples how to apply the root cause analysis method to various industrial problems.</span></li>
<li><strong><span>Damage Mechanisms in Boilers and Steam Power Plant Equipment: </span></strong><span>Gain a thorough understanding of all the damage mechanisms that occur in boilers and all steam power plant equipment including turbines, condensers and feedwater heaters. These mechanisms include corrosion, erosion, flow accelerated corrosion, stress corrosion cracking, creep, under-deposit attack, cavitation, hydrogen embrittlement, etc.</span></li>
<li><strong><span>Symptoms of Failures in Boilers and Steam Power Plant Equipment, Possible Causes, Components Typically Affected, and Solutions:</span></strong><span> Learn about all the symptoms of failures in boilers and steam power plant equipment including steam turbines, condensers, and feedwater heaters, their possible causes, components typically affected and proven solutions.</span></li>
<li><strong><span>Case Histories of Failures in Boilers, Steam Turbines, Condensers, and Feedwater Heaters:</span></strong><span> Learn by studying many case histories how failures occur in boilers, steam turbines, condensers, and feedwater heaters and the corrective actions taken to deal with them</span></li>
</ul>
<p> </p>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals (this seminar is suitable for individuals who do not have an electrical background)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2011 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>ROOT CAUSE ANALYSIS FOR BOILERS AND STEAM CYCLE FAILURES MANUAL (includes practical information and case histories - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Root Cause Analysis for Boilers and Steam Cycle Failures

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of circulating fluidized bed (CFB) boiler coal power plants. The Commissioning Management System of CFB boiler coal power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report.</p>
<p>The course provides also a thorough understanding of all the commissioning requirements for CFB boiler and auxiliaries, turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear, and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a coal power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of CFB boiler coal power plant systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports.</p>
<p>This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any CFB boiler coal power plant equipment because it provides detailed pre-commissioning checks and detailed tests and commissioning procedures and instructions for every component in a CFB boiler coal power plant.</p>
<p>In addition, the course provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each CFB boiler coal power plant equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in CFB Boiler Coal Power Plants:</span></strong><span> Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in CFB boiler coal power plants</span></li>
<li><strong><span>Commissioning Management System of CFB Boiler Coal Power Plants:</span></strong><span> Discover the benefits of the Commissioning Management System of CFB boiler coal power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report</span></li>
<li><strong><span>Commissioning Procedures and Instructions for CFB Boiler and Auxiliaries in Coal Power Plants:</span></strong><span> Learn about the commissioning procedures and instructions for CFB boiler and auxiliaries including all commissioning activities, typical commissioning schedule, hydraulic test and wet preservation, air and gas tightness test, trial run of equipment, electronic precipitators, fuel oil system, preparation for first light up, alkali boil - out, acid cleaning and passivation, thermal flow test of economizer, water walls, and superheater, valves, steam boiling, and safety valve setting</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Turbine and Auxiliaries:</span></strong><span> Gain a thorough understanding of all the commissioning procedures and instructions for turbine and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Generator and Auxiliaries:</span></strong><span> Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Electrical Equipment: </span></strong><span>Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers, and motors</span></li>
<li><strong><span>CFB Boiler Coal Power Plant Equipment and Systems:</span></strong><span> Learn about various CFB boiler coal power plant equipment and systems including: CFB boilers, superheaters, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>CFB BOILER COAL POWER PLANT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component and system in CFB boiler coal power plants - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Commissioning and Start-Up Activities of Coal Power Plants

Ipswich

<h4 data-ux="ContentCardHeading" data-aid="CONTENT_HEADLINE1_RENDERED" data-typography="HeadingDelta" style="color: rgb(27, 27, 27); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(27, 27, 27);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-size: 24px; box-sizing: border-box;" fr-original-style="font-size: 24px;">A development program for emerging or existing leaders and managers</span></strong></h4><p style="color: rgb(94, 94, 94); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(94, 94, 94);">This two day introduction to leadership and management program covers the following elements:-</p><p style="color: rgb(94, 94, 94); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(94, 94, 94);"><strong style="color: inherit; font-weight: 700; box-sizing: border-box;" fr-original-style=" color: inherit;">Day 1. Leadership and Management</strong></p><p style="color: rgb(94, 94, 94); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(94, 94, 94);"><strong style="color: inherit; font-weight: 700; box-sizing: border-box;" fr-original-style=" color: inherit;">Four hour session focusing on Leadership and Management</strong></p><p style="color: rgb(94, 94, 94); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(94, 94, 94);">This element will allow individuals to explore the differences between Leadership and Management concepts whilst focusing on elements such as change management, innovation and ways in which to build effective teams. An understanding that values of trust and honesty between employees is important to develop mutual relationships.&nbsp;</p><p style="color: rgb(94, 94, 94); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(94, 94, 94);"><strong style="color: inherit; font-weight: 700; box-sizing: border-box;" fr-original-style=" color: inherit;">Two hour sessions focusing on Communication</strong></p><p style="color: rgb(94, 94, 94); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(94, 94, 94);">Using the Myers Briggs Type Indicator tool to gauge how individuals work when receiving and giving information. &nbsp;We will look at how different types communicate and how from time to time it&rsquo;s important for you to match your respondents type in order for them to gauge understanding quickly and efficiently. &nbsp;We will also look at the structure behind active communication.</p><p style="color: rgb(94, 94, 94); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(94, 94, 94);"><br fr-original-style="" style="box-sizing: border-box;"></p><p style="color: rgb(94, 94, 94); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(94, 94, 94);"><strong style="color: inherit; font-weight: 700; box-sizing: border-box;" fr-original-style=" color: inherit;">Day 2. Leadership and Management</strong></p><p style="color: rgb(94, 94, 94); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(94, 94, 94);"><strong style="color: inherit; font-weight: 700; box-sizing: border-box;" fr-original-style=" color: inherit;">Four hour session focusing on Time &amp; Organisation</strong></p><p style="color: rgb(94, 94, 94); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(94, 94, 94);">Designed to help people to prioritise and control their own personal goals or workload in an organised way. &nbsp;It will enable individual attendees to answer that question &#39;What is Time Management?&#39; and look at the way in which they organise their work, run effective meetings whilst making suggestions on ways to improve with practical examples.</p><p style="color: rgb(94, 94, 94); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(94, 94, 94);"><strong style="color: inherit; font-weight: 700; box-sizing: border-box;" fr-original-style=" color: inherit;">Two hour sessions focusing on</strong><em style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;"><strong style="color: inherit; font-weight: 700; box-sizing: border-box;" fr-original-style=" color: inherit;">&nbsp;</strong></em><strong style="color: inherit; font-weight: 700; box-sizing: border-box;" fr-original-style=" color: inherit;">Delegation</strong></p><p style="color: rgb(94, 94, 94); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(94, 94, 94);">Being able to let go and delegate tasks to others can be one of the hardest managerial responsibilities. The temptation to it yourself can become overwhelming, so we will look at ways of ensuring that delegation is structured and approached in a timely way.</p><p style="color: rgb(94, 94, 94); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(94, 94, 94);">Interested?&nbsp; Find out more <a href="https://switchdirection.co.uk/leadership-%26-management" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">here</a></p>

Switch Direction

Leadership Development

Employee Management

Leadership and Management Training; Introductory Management Training; Ipswich; Suffolk

An Introduction to Leadership & Management

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong><em> </em></h2>
<p><span>This 2-half-day Virtual Instructor Led Training (VILT) course will discuss the chemical aspects of the water-steam cycle in a power plant. The VILT course will examine the different types of chemicals used in boilers, potential issues in a water-steam cycle as well as aspects of monitoring and specifications regarding target values and alarm levels. Participants will also be equipped on what to do or key action steps to take in the event of chemistry-related incidents.</span></p>
<p>This course is delivered in partnership with ENGIE Laborelec.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><span>The VILT course will cover the following:</span></p>
<ul>
<li><span>Detailed aspects of chemistry in a water steam cycle, including types of chemicals used in boilers depending on the treatment and type of boiler</span></li>
<li><span>Potential issues in a water-steam cycle such as corrosion and deposition</span></li>
<li><span>Monitoring &amp; analytical programmes and knowledge of specifications for the water steam cycle (normal values targets - alarm levels)</span></li>
<li><span>Chemistry aspects during transition periods: start-up, shutdown and preservation</span></li>
<li><span>Actions to be taken in the event of an alarm</span></li>
<li><span>Examples of incidents or deviations compared to normal chemistry</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p><span>The VILT course is intended for:</span></p>
<ul>
<li><strong><span>Power plant chemists</span></strong></li>
<li><strong><span>Plant operation or maintenance engineers</span></strong></li>
<li><strong><span>Consultants and technical project managers</span></strong></li>
<li><strong><span>Boiler engineers</span></strong></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The VILT course will be delivered online in 2 half-day sessions comprising 4 hours per day, with 2 x 10 minutes break per day, including time for lectures, discussion, quizzes and short classroom exercises.</span></p>
<p><span>Course Duration: 2 half-day sessions, 4 hours per session (8 hours in total).</span></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader <span>is a chemistry consultant in the energy sector. He works with operators of power plants and industrial facilities. He is active in water-steam cycle chemistry, where he provides support to increase chemistry maturity through audits, trainings or development of key performance indicators.</span></p>
<p><span>His role also includes operational assistance in the field of chemical cleaning and troubleshooting. More recently, he expanded his field of competence towards electrical storage. In this regard, he specializes in electrochemistry and is in charge of different tests on batteries and their components within the ENGIE Batteries Lab.</span></p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Assessing the Water-Steam Chemistry Cycle in Thermal Power Plants

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 3 full-day course will provide a comprehensive understanding of the various types of transformer maintenance including breakdown maintenance, preventive maintenance, total productive maintenance, condition-based maintenance, proactive maintenance, and reliability-centered maintenance. All the expected problems in dry and oil-filled transformers will be discussed in detail. All the diagnostics, troubleshooting and maintenance required to ensure adequate operation of transformers will be covered thoroughly. This course will focus on maximizing the efficiency, reliability, and longevity of all types of transformers by providing an understanding of all commissioning requirements, repair and refurbishment methods of transformers.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Equipment Diagnostics and Inspection:</strong> Learn in detail all the diagnostic techniques and inspections required of critical components of transformers</li>
<li><strong>Equipment Testing:</strong> Understand thoroughly all the routine tests, type tests, and special tests required for the various types of transformers</li>
<li><strong>Equipment Maintenance and Troubleshooting:</strong> Determine all the maintenance and troubleshooting activities required to minimize transformer downtime and operating cost</li>
<li><strong>Equipment Repair and Refurbishment:</strong> Gain a detailed understanding of the various methods used to repair and refurbish transformers</li>
<li><strong>Efficiency, Reliability, and Longevity:</strong> Learn the various methods used to maximize the efficiency, reliability, and longevity of transformers</li>
<li><strong>Equipment Sizing:</strong> Gain a detailed understanding of all the calculations and sizing techniques used for transformers</li>
<li><strong>Design Features:</strong> Understand all the design features that improve the efficiency and reliability of transformers</li>
<li><strong>Equipment Selection:</strong> Learn how to select all types of transformers by using the performance characteristics and selection criteria that you will learn in this course</li>
<li><strong>Equipment Commissioning:</strong> Understand all the commissioning requirements for transformers</li>
<li><strong>Equipment Codes and Standards:</strong> Learn all the codes and standards applicable for transformers</li>
<li><strong>Equipment Causes and Modes of Failure:</strong> Understand the causes and modes of failure in transformers</li>
<li><strong>System Design:</strong> Learn all the requirements for designing different types of transformer systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals (this course is suitable for individuals who do not have an electrical background)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Transformer Testing, Maintenance and Commissioning Manual (covering all the tests, maintenance activities, protective systems and all commissioning procedures for all types of transformers - 350 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Transformer Maintenance

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>To the non-geologist, working with Petroleum Geologists can be confusing. Petroleum geology has specific terminology and many concepts and data sources unfamiliar to the uninitiated.</p>
<p>This course has been designed to introduce these terms and provide an insight into how oil and gas are formed, how they are found and how they are extracted. Using a holistic combination of lectures, experiments, case study and practical exercises, the course involves an introduction to fundamental geological concepts, to exploration techniques, prospecting, drilling, well logs and recovery methods. The course will also demystify the terminology surrounding petroleum geology, demonstrate the use of geological information to show the value and weakness of different datasets, and lead to better communication and decision-making between the geologists and non-geologists. </p>
<p>It will feature <strong>world-class virtual reality field trips</strong> that incorporate activities and features unavailable in the physical field, and provide for a more integrated and flexible learning resource (also see the trainer's article on page 4 which was first published in GEO ExPro Magazine, the upstream oil and gas industry's favourite magazine).</p>
<p><strong>Course Highlights:</strong></p>
<ol>
<li>Course facilitator has delivered petroleum geology training to many companies over the years</li>
<li>Facilitator is also a professionally trained teacher and former university lecturer who is experienced in communicating with people at all levels of technical knowledge</li>
<li>Practical exercises, experiments, examination of real rocks, a virtual reality field trip and case study are used to clarify and reinforce important concepts</li>
</ol>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><strong>By attending this training, you will be able to acquire the following:</strong></p>
<ul>
<li>Understand the geological methods and principles used in hydrocarbon exploration, development and production.</li>
<li>Understand the key elements of a petroleum system, from hydrocarbon source to reservoir and seal</li>
<li>Appreciate basin analysis, regional geology and play based exploration techniques</li>
<li>Be aware of the different sorts of hydrocarbon trap from structural to stratigraphic</li>
<li>Understand the technical terminology, tools and methods used in exploration geology</li>
<li>Learn about unconventional</li>
<li>Understand and evaluate the sources and reliability of various types of geological information</li>
<li>Understand acquisition, processing and interpretation of seismic data</li>
<li>Learn the technical processes and terminology involved in exploration</li>
<li>Understand how a prospect is defined and risked</li>
<li>Understand how seismic, existing well information and outcrop geology can be used for exploration</li>
<li>Gain an understanding of the methods used for petroleum geology to allow a discovery to be appraised and then developed</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p><strong>The course is suitable to all personnel, but those that benefit most include:</strong></p>
<ul>
<li>
<p>This course will benefit Petroleum Engineers (reservoir, drilling, production) who work with geological data, Geophysicists with little or no geological background, Project managers whose teams include petroleum geologists, Finance, Procurement, Marketing and Communications staff, and government Data Managers who handle petroleum geological data and need to understand the sources of different types of data.</p>
</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is the Geosciences Technical Director for PetroEdge. She was previously, the manager of Robertson Petroleum Training Centre and a Senior Project Scientist at Robertson CGG. She has over 20 years of experience in teaching geology and leading field trips. Prior to her 8 years at Robertson, she was in academia as a lecturer for 6 years and a Research Fellow for 3 years. She has conducted fieldwork and led field trips in the US and many areas in the UK. In addition, she has led university regional geology day schools and has comprehensive experience in course and study programme writing.</p>
<p>She has extensive experience in delivering courses and in Clastic and Carbonate Reservoir Geology, Deepwater Turbidites, Sandstone Reservoirs, Wireline Log Interpretation, Integrated Sequence Stratigraphy, Basin Analysis and Exploration &amp; Appraisal workshops globally. In delivering the Exploration Team Management Workshop, she has project managed and taught key principles and modules on project planning, data collection/collation, geophysical assessment, stratigraphy and facies mapping, source rock facies and hydrocarbon generation, play fairway mapping, risking and prospect evaluation. Her knowledge and enthusiasm for instructing is reflected in consistently being rated as excellent by trainees, and clients specifically requesting her participation in courses.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Petroleum Geology for Non-Geologists

London

<h2>Scrum Master Exam Prep</h2>
 <p>This workshop prepares you for the Scrum.org Professional Scrum Master (PSM)™ I certification. A voucher for the exam and the access information you will need to take the exam will be provided to you via email after you have completed the course. NOTE: If you have participated in any of IIL's other Scrum workshops, you can bypass this program and focus on reading/studying the Scrum Guide and taking practice exams from Scrum.org.</p>
 <p>A Scrum Master helps project teams properly use the Scrum framework, increasing the likelihood of the project's overall success. Scrum Masters understand Scrum values, practices, and applications and provide a level of knowledge and expertise above and beyond that of typical project managers. Scrum Masters act as 'servant leaders', helping the rest of the Scrum Team work together and learn the Scrum framework. Scrum Masters also protect the team from both internal and external distractions.</p>
 <p>The Professional Scrum Master™ I (PSM I) certificate is a Scrum.org credential that enables successful candidates to demonstrate a fundamental level of Scrum mastery. PSM I credential holders will grasp Scrum as described in The Scrum Guide™1 and recognize how those concepts can be applied. They will also share a consistent terminology and approach to Scrum with other certified professionals.</p>
 <p>Scrum.org does not require that you take their own sponsored or any preparatory training. However, training can facilitate your preparation for this credential. And this course is based on IIL's Scrum Master Workshop, which is aligned with The Scrum Guide™ and was built based on PSM I credentialed expertise. It will provide you with the information you need to pass the exam and IIL will make the arrangements for your online exam. You will be provided with an exam code and instructions, so that you can take the exam at your convenience, any time you are ready after the course. Passwords have no expiration date, but they are valid for one attempt only.</p><h3>What you will Learn</h3>
 <p>You'll learn how to:</p>
 <ul>
 <li>Successfully prepare for the Scrum.org PSM I exam</li>
 <li>Comprehend the Agile Manifesto and mindset</li>
 <li>Explain the fundamental principles of Scrum, including events, artifacts, and roles</li>
 <li>Guide the Scrum team in their responsibilities</li>
 <li>Define Ready and Done</li>
 <li>Write requirements in the form of user stories</li>
 <li>Estimate using planning poker and prioritize using MoSCoW</li>
 <li>Facilitate the team through the 5 Sprint events</li>
 <li>Fulfill the role of Scrum Master in a Scrum project</li>
 <li>Create Information Radiators to enable transparency</li>
 <li>Define the structure of the retrospective</li>
 </ul><section>
                    <h3>Getting Started</h3> <ul> <li>Introductions</li> <li>Workshop orientation</li> <li>Exam prep preview</li> </ul> <h3>Foundation Concepts</h3> <ul> <li>Agile History, Values, and Mindset</li> <li>Introduction to Scrum</li> <li>Scrum events</li> <li>Scrum artifacts</li> </ul> <h3>Scrum Roles and Responsibilities</h3> <ul> <li>Product Owner responsibilities</li> <li>Scrum Master responsibilities</li> <li>The Team responsibilities</li> <li>Cross-functional teams</li> <li>Building effective teams</li> </ul> <h3>The Product Backlog and User Stories</h3> <ul> <li>The Product Backlog</li> <li>User Stories</li> <li>Definition of Done</li> <li>Backlog grooming</li> <li>Estimating User Stories</li> <li>Story points, planning poker</li> <li>Prioritizing User Stories</li> </ul> <h3>The Sprint</h3> <ul> <li>Team capacity and velocity</li> <li>The Sprint Planning Meeting</li> <li>The Sprint Backlog</li> <li>The Sprint</li> <li>Learning to self-manage, self-organize, self-improve</li> <li>Sprint Review and Retrospective</li> </ul> <h3>Project Progress and Completion</h3> <ul> <li>The Daily Scrum</li> <li>The Task Board and The Burndown Chart</li> <li>Information Radiators</li> <li>Closing a Scrum Project </li> </ul> <h3>Summary and Next Steps</h3> <ul> <li>Review of course goals, objectives, and content</li> <li>Exam prep next steps</li> </ul>


                </section>

IIL Europe Ltd

Scrum Master Exam Prep: In-House Training

General Admission

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong><em> </em></h2>
<p>Electrification of the transportation sector will impact the power system in several ways. Besides the additional load, local impact on the grid needs to be managed by the grid operators. Simultaneously charging of many electric vehicles (EVs) might exceed the limits in specific locations. On the other hand, EVs can provide flexibility and other ancillary services that will help grid operators.</p>
<p>This 3 half-day VILT course will provide a complete overview of integrating electric vehicles (EVs) into the power grid. It will cover the whole value chain from grid operations to the car battery. This includes the control room, possible grid reinforcement, demand side management and power electronics.</p>
<p>This course will demonstrate the impact on the grid and solutions for a safe &amp; cost-effective grid plan and operation, with examples of successful integration of EVs.</p>
<p>The course will also provide vital knowledge about technology used for EVs such as power electronics, demand side management, communication and batteries. In this context, the focus will be on power electronics as it has the highest impact on the grid. The grid planning tool, pandapower, is introduced as an open source tool for power system modelling.</p>
<p>The set-up of the training course allows for discussion and questions. Questions can be formulated by the participants upfront or during the training.</p>
<div>
<div>This course is delivered in partnership with Fraunhofer IEE.</div>
<div></div>
</div>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>At the end of this course, the participants will:</p>
<ul>
<li>Understand the charging options for EVs and its impact on the grid and batteries</li>
<li>Identify system services for EVs with regards to voltage quality at the point of common coupling</li>
<li>Discover what are the 'grid friendly' and grid supporting functions in EVs</li>
<li>Uncover the different applications, standards and data researched on EVs</li>
<li>Examine the application of a grid planning tool (pandapower) for power system modelling</li>
<li>Be able to develop code snippets with pandapower</li>
<li>Apply and execute a code example for power system modelling with pandapower</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>EV and grid project developers and administrators</li>
<li>Power grid operators and planners</li>
<li>EPC organisations involved in grid development</li>
<li>EV/ battery manufacturers and designers</li>
<li>EV transport planners and designers</li>
<li>Government regulators and policy makers</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><strong>The VILT will be delivered online in 3 half-day sessions comprising 4 hours per day, with 2 x 10 minutes breaks per day</strong>, including time for lectures, discussion, quizzes and short interactive exercises.</p>
<p>Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end of every session/day.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Our first course expert is Head of Department Converters and Electrical Drive Systems at Fraunhofer IEE and Professor for Electromobility and Electrical Infrastructure at Bonn-Rhein-Sieg University of Applied Sciences. He received his engineering degree in automation in 2008 by the THM Technische Hochschule Mittelhessen (FH Giessen-Friedberg). Afterwards he studied power engineering at University of Kassel and received his diploma certificate in 2010. In 2016 he received the Ph.D. (Dr.-Ing.) from the University of Hannover. The title of his dissertation is Optimized multifunctional bi-directional charger for electric vehicles. He has been a researcher at the Fraunhofer IEE in Kassel since 2010 and deals with power converters for electric vehicles, photovoltaics and wind energy. His current research interests include the bidirectional inductive power transfer, battery charger and inverter as well as new power electronic components such as SiC MOSFETs and chokes. Additionally, our key expert is Chairman of the IEEE Joint IAS/PELS/IES German Chapter and a member of the International Scientific Committee of the EPE Association.</p>
<p>Our second course expert is deputy head of energy storage department at Fraunhofer IEE. Prior to this he was the Director of Grid Integration department at SMA Solar Technology AG, one of the world's largest manufacturers of PV power converters. Before joining SMA, our course expert was manager of the Front Office System Planning at Amprion GmbH (formerly RWE TSO), one of the four German transmission system operators. He holds a degree of electrical engineering of the University of Kassel, Germany. In 2003 he finished his Ph.D. (Dr.-Ing.) on the topic of wind power forecasting at the 'Institute of Solar Energy Supply Technology' (now Fraunhofer IEE) in Kassel. In 2004 he started his career at RWE TSO with main focus on wind power integration and congestion management. Our course expert is chairman of the IEC SC 8A 'Grid Integration of Large-capacity Renewable Energy (RE) Generation' and has published several papers about grid integration of renewable energy source and forecasting systems on books, magazines, international conferences and workshops.</p>
<p>Our third course expert is Research Associate at Fraunhofer IEE. He is actively working on different projects related to the integration of electric vehicle charging into the electric distribution grid. The focus of this work concerns time series based simulations for grid planning and operation in order to investigate the effect of a future rollout of electric vehicles and charging infrastructure on economics e.g. costs for grid reinforcement. He completed his master degree (MSc.) in Business Administration and Engineering: Electrical Power Engineering at RWTH Aachen University, Germany.</p>
<p>Our trainers are experts from <strong>Fraunhofer Institute for Energy Economics and Energy System Technology (Fraunhofer, IEE), Germany</strong>. The Fraunhofer IEE researches for the national and international transformation of energy supply systems</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

The Impact of Electric Vehicles (EVs) on the Grid

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is intended for experienced IT security-related practitioners, auditors, consultants, investigators, or instructors, including network or security analysts and engineers, network administrators, information security specialists, and risk management professionals, who are pursuing CISSP training and certification to acquire the credibility and mobility to advance within their current computer security careers or to migrate to a related career. Through the study of all eight CISSP Common Body of Knowledge (CBK) domains, students will validate their knowledge by meeting the necessary preparation requirements to qualify to sit for the CISSP certification exam. Additional CISSP certification requirements include a minimum of five years of direct professional work experience in two or more fields related to the eight CBK security domains, or a college degree and four years of experience.</p>Overview<p>#NAME?</p><p>In this course, students will expand upon their knowledge by addressing the essential elements of the 8 domains that comprise a Common Body of Knowledge (CBK)Â© for information systems security professionals.</p>Prerequisites<p></p><ul><li>CompTIA Network+ Certification</li></ul><p></p></div><div id="course-pills-2"><h3>1 - Security and Risk Management</h3> <ul> <li>Security Governance Principles</li> <li>Compliance</li> <li>Professional Ethics</li> <li>Security Documentation</li> <li>Risk Management</li> <li>Threat Modeling</li> <li>Business Continuity Plan Fundamentals</li> <li>Acquisition Strategy and Practice</li> <li>Personnel Security Policies</li> <li>Security Awareness and Training</li> </ul> <h3>2 - Asset Security</h3> <ul> <li>Asset Classification</li> <li>Privacy Protection</li> <li>Asset Retention</li> <li>Data Security Controls</li> <li>Secure Data Handling</li> </ul> <h3>3 - Security Engineering</h3> <ul> <li>Security in the Engineering Lifecycle</li> <li>System Component Security</li> <li>Security Models</li> <li>Controls and Countermeasures in Enterprise Security</li> <li>Information System Security Capabilities</li> <li>Design and Architecture Vulnerability Mitigation</li> <li>Vulnerability Mitigation in Embedded, Mobile, and Web-Based Systems</li> <li>Cryptography Concepts</li> <li>Cryptography Techniques</li> <li>Site and Facility Design for Physical Security</li> <li>Physical Security Implementation in Sites and Facilities</li> </ul> <h3>4 - Information Security Management Goals</h3> <ul> <li>Organizational Security</li> <li>The Application of Security Concepts</li> </ul> <h3>5 - Information Security Classification and Program Development</h3> <ul> <li>Information Classification</li> <li>Security Program Development</li> </ul> <h3>6 - Risk Management and Ethics</h3> <ul> <li>Risk Management</li> <li>Ethics</li> </ul> <h3>7 - Software Development Security</h3> <ul> <li>Software Configuration Management</li> <li>Software Controls</li> <li>Database System Security</li> </ul> <h3>8 - Cryptography</h3> <ul> <li>Ciphers and Cryptography</li> <li>Symmetric-Key Cryptography</li> <li>Asymmetric-Key Cryptography</li> <li>Hashing and Message Digests</li> <li>Email, Internet, and Wireless Security</li> <li>Cryptographic Weaknesses</li> </ul> <h3>9 - Physical Security</h3> <ul> <li>Physical Access Control</li> <li>Physical Access Monitoring</li> <li>Physical Security Methods</li> <li>Facilities Security</li> </ul></div>

Nexus Human

Certified in Cybersecurity (CC)

Certificate in Information Security Management Principles (CISMP)

Certified Cloud Security Professional (CCSP)

Certified Information Security Manager (CISM)

Cissp

CompTIA Security+

Certified Information Security Systems Professional (CISSP)

Belfast

<div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(0, 0, 0);">The purpose&nbsp;of these qualifications is to enable learners to coach clients &ndash; one to one and in small groups &ndash; towards their health and fitness goals. Learners will develop the knowledge, skills and behaviours to plan and deliver creative and personalised exercise programmes, provide nutritional advice and support clients with their overall lifestyle management.</span></p><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><strong style="color: rgb(235, 92, 35); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: rgb(235, 92, 35);">This qualification is mapped directly to:</strong></span></p><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">The Chartered Institute for the Management of Sport and Physical Activity (CIMSPA) professional standards for a Personal Trainer.</span></p><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><strong style="color: rgb(235, 92, 35); font-weight: 700; box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(235, 92, 35);">Qualification Structure:</strong></span></p><ul style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><li id="isPasted" fr-original-style="" style="box-sizing: border-box;">Unit 1: Anatomy &amp; physiology for exercise &amp; fitness instructors</li><li fr-original-style="" style="box-sizing: border-box;">Unit 2: Providing a positive customer experience in the exercise environment</li><li fr-original-style="" style="box-sizing: border-box;">Unit 3: Lifestyle management &amp; health awareness</li><li fr-original-style="" style="box-sizing: border-box;">Unit 4: Gym-based programme planning and preparation</li><li fr-original-style="" style="box-sizing: border-box;">Unit 5: Gym-based programme delivery and professional instruction</li><li fr-original-style="" style="box-sizing: border-box;">Unit 6: Applied anatomy and physiology</li><li fr-original-style="" style="box-sizing: border-box;">Unit 7: Promoting wellness through client motivation and interaction</li><li fr-original-style="" style="box-sizing: border-box;">Unit 8: Bespoke exercise programme design</li><li fr-original-style="" style="box-sizing: border-box;">Unit 9: Customised exercise programme instruction and communication techniques</li><li fr-original-style="" style="box-sizing: border-box;">Unit 10: Nutrition to support physical activity</li><li fr-original-style="" style="box-sizing: border-box;">Unit 11: Business acumen for a successful Personal Training Practice</li></ul><div fr-original-style="" style="box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><strong style="color: rgb(235, 92, 35); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: rgb(235, 92, 35);"><br fr-original-style="" style="box-sizing: border-box;"></strong></span></div><div fr-original-style="" style="box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><strong style="color: rgb(235, 92, 35); font-weight: 700; box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(235, 92, 35);">Entry Requirements:</strong></span></div><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(0, 0, 0);">Learners must be aged 16 plus. Ideally they should have some experience of gym-based exercises as participation in a variety of gym-based practical sessions will be required throughout the qualification. Learners should also have communication skills pitched at level 2 which can be developed during the course.</span></p><div fr-original-style="" style="box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><br fr-original-style="" style="box-sizing: border-box;"></span></div><div id="isPasted" fr-original-style="" style="box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><strong style="color: rgb(235, 92, 35); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: rgb(235, 92, 35);">Assessments:</strong></span></div><div style="color: rgb(105, 105, 105); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(105, 105, 105);"><section fr-original-style="" style="box-sizing: border-box;"><div data-tags="{All} " fr-original-style="" style="box-sizing: border-box;"><div itemprop="text" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Multiple choice test</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Assessment workbook</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Observation of practical skills</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Portfolio of evidence (Learner assessment record)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><div id="isPasted" fr-original-style="" style="box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><strong style="color: rgb(235, 92, 35); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: rgb(235, 92, 35);">Add Ons:</strong></span></div><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">If you choose the <em fr-original-style="" style="box-sizing: border-box;">Gold</em> or <em fr-original-style="" style="box-sizing: border-box;">Platinum</em> Course you will receive the following:</p><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><strong style="color: rgb(235, 92, 35); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: rgb(235, 92, 35);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">NASM Certified Nutrition Coach (CNC) - </span></strong><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><em fr-original-style="" style="box-sizing: border-box;">*Platinum Only</em></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">NASM Behaviour Change Science: Help Clients Stick with their Programme</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">NASM Speed Agility and Quickness Training</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">NASM Navigating Diets</strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">NASM Anatomy of a Research paper: How to Read beyond the Abstract</strong></span></p></div><br fr-original-style="" style="box-sizing: border-box;"></div></section></div></div><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><br fr-original-style="" style="box-sizing: border-box;"></div>

The purpose of these qualifications is to enable learners to coach clients – one to one and in small groups – towards their health and fitness goals. Learners will develop the knowledge, skills and behaviours to plan and deliver creative and personalised exercise programmes, provide nutritional advice and support clients with their overall lifestyle management.
This qualification is mapped directly to:
The Chartered Institute for the Management of Sport and Physical Activity (CIMSPA) professional standards for a Personal Trainer.
Qualification Structure:
Unit 1: Anatomy & physiology for exercise & fitness instructors
Unit 2: Providing a positive customer experience in the exercise environment
Unit 3: Lifestyle management & health awareness
Unit 4: Gym-based programme planning and preparation
Unit 5: Gym-based programme delivery and professional instruction
Unit 6: Applied anatomy and physiology
Unit 7: Promoting wellness through client motivation and interaction
Unit 8: Bespoke exercise programme design
Unit 9: Customised exercise programme instruction and communication techniques
Unit 10: Nutrition to support physical activity
Unit 11: Business acumen for a successful Personal Training Practice
Entry Requirements:
Learners must be aged 16 plus. Ideally they should have some experience of gym-based exercises as participation in a variety of gym-based practical sessions will be required throughout the qualification. Learners should also have communication skills pitched at level 2 which can be developed during the course.
Assessments:
Multiple choice test
Assessment workbook
Observation of practical skills
Portfolio of evidence (Learner assessment record)


Add Ons:
If you choose the Gold or Platinum Course you will receive the following:
NASM Certified Nutrition Coach (CNC) - *Platinum Only
NASM Behaviour Change Science: Help Clients Stick with their Programme
NASM Speed Agility and Quickness Training
NASM Navigating Diets
NASM Anatomy of a Research paper: How to Read beyond the Abstract

Platinum Training Institute

NASM

Personal Trainer

Coaching

Sport

Fitness

The purpose of these qualifications is to enable learners to coach clients – one to one and in small groups – towards their health and fitness goals. Learners will develop the knowledge, skills and behaviours to plan and deliver creative and personalised exercise programmes, provide nutritional advice and support clients with their overall lifestyle management.

PTI Diploma in Personal Training

Bournemouth

London Waterloo Academy

Flight Attendant

Stewardess

FLIGHT ATTENDANT VIRTUAL VIA ZOOM COURSE, EVENINGS

Registration Fee

Course Fee

<p style="color: rgb(15, 21, 26); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(15, 21, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Become a Certified User Experience Professional</strong></p><p style="color: rgb(15, 21, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);">Build a career in UX with the world&rsquo;s only university credit-rated online UX course. Acquire the mindset, the skills and the confidence that make UX designers so valuable. A rewarding and meaningful career awaits.</p><p style="color: rgb(15, 21, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why become a UX designer?</strong></p><ul style="color: rgb(15, 21, 26); box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);"><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Be in demand</strong><br fr-original-style="" style="box-sizing: border-box;">UX is a high-growth sector. The demand for UX designers far outstrips the supply of qualified professionals.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Get well paid</strong><br fr-original-style="" style="box-sizing: border-box;">UX designers are highly paid. The average entry-level salary for a UX designer in the United Kingdom is &pound;35,465 (PayScale, 2019)<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Love your job</strong><br fr-original-style="" style="box-sizing: border-box;">UX designers make an impact. They solve real-world problems using an exciting mix of research, design, technology and psychology.</li></ul><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Study method</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Online, self-paced</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Duration</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">6 months</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Access to content</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">12 months</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Qualification</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Level 8 Diploma - User Experience Design</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Awarded by Glasgow Caledonian University</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Regulated by SQA</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Additional info</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Exam(s) / assessment(s) is included in price</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Tutor is available to students</p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><section style="color: rgb(15, 21, 26); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(15, 21, 26);"><h2 fr-original-style="" style="box-sizing: border-box;">Description</h2><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Duration: 6 months<br fr-original-style="" style="box-sizing: border-box;"></strong>Get certified in six months following a flexible, structured learning path.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Delivery: Online<br fr-original-style="" style="box-sizing: border-box;"></strong>The course is delivered entirely online, including video modules, mentor-led webinars and support.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Assessment: 2-hour exam<br fr-original-style="" style="box-sizing: border-box;"></strong>Before getting certified, you&#39;ll be assessed during a two-hour exam taken online.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Outcomes for you</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Think like a UX designer; adopt the mindset that sets them apart</li><li fr-original-style="" style="box-sizing: border-box;">Showcase your knowledge with a portfolio of project work</li><li fr-original-style="" style="box-sizing: border-box;">Speak with the confidence that comes from a true, deep understanding of UX</li><li fr-original-style="" style="box-sizing: border-box;">Advance your career with job-ready skills</li><li fr-original-style="" style="box-sizing: border-box;">Complete a university credit-rated course, valued by employers globally</li><li fr-original-style="" style="box-sizing: border-box;">Become a Certified UX Professional</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Learn with us</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">We&rsquo;ve worked hard to design the best possible online learning experience for you. As well as an unmatched syllabus, our approach includes:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Projects &amp; portfolio</strong><br fr-original-style="" style="box-sizing: border-box;">Learn by doing with a series of real-world projects ideal for your UX portfolio.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Mentors &amp; webinars</strong><br fr-original-style="" style="box-sizing: border-box;">Be guided by our hand-picked, world-class mentors during monthly webinars.<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Structure &amp; support</strong><br fr-original-style="" style="box-sizing: border-box;">Stay motivated with a structured programme supported by fellow students and our customer success team.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">What you&rsquo;ll learn</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">We&rsquo;ve put together a university credit-rated curriculum that&rsquo;s deep, rigorous and<br fr-original-style="" style="box-sizing: border-box;">covers everything you need to know to become a certified UX professional and<br fr-original-style="" style="box-sizing: border-box;">turbocharge your career.</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 01</strong>&nbsp;- Introduction to UX design</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 02</strong>&nbsp;- User research</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 03</strong>&nbsp;- User goals</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 04</strong>&nbsp;- Structure and navigation</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 05</strong>&nbsp;- Interactions</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 06</strong>&nbsp;- Design principles</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 07</strong>&nbsp;- Design patterns</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 08</strong>&nbsp;- Mobile</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 09</strong>&nbsp;- Workflows</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 10</strong>&nbsp;- Prototyping and handover</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 11</strong> - AI and UX</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 12</strong> - Creating your portfolio</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 13</strong> - Career guidance Hub</li><li style="font-weight: bold; box-sizing: border-box;" fr-original-style="font-weight: bold;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Tutorials for Figma</strong></li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Projects and portfolio</strong>&nbsp;- Projects that build into a portfolio</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Exam</strong>&nbsp;- 2-hour final exam</li></ul></section><section style="color: rgb(15, 21, 26); box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);"><h2 fr-original-style="" style="box-sizing: border-box;">Requirements</h2><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Background</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">You don&rsquo;t need experience in design or technology to enrol in our courses, although having one or both is a definite bonus. Our students come from a diverse array of backgrounds, including project management, development, graphic design, product management, business analysis and so on.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Commitment</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">You do need to be motivated and committed. We set a high bar. Studying for one of our professional qualifications requires a certain amount of time, energy and focus. Our team will be there to support you along every step of the way but success will come as a result of your own diligence.</p></section><section style="color: rgb(15, 21, 26); box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);"><h2 fr-original-style="" style="box-sizing: border-box;">Career path</h2><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">The average salary for entry level user experience designers is &pound;28,000</li><li fr-original-style="" style="box-sizing: border-box;">The average salary for user experience designers with 1-5 years experience ranges from &pound;29,000 to &pound;50,000</li><li fr-original-style="" style="box-sizing: border-box;">The average salary for user experience managers/leads is &pound;80,000</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Information from LinkedIn Salary Reports, based on real jobs listings.</p></section>

UX Design Institute 

Product Design

UI / UX Design

Professional Diploma in UX Design

Reading

Nottingham

Dickson Training Ltd

ILM Level 3 Award in Leadership and Management

Online Course

Classroom Course

Body doubling Short Flo Session for self-employed or employed women. It can feel isolating and lonely working from home or on the road. Procrastination and other mind games can make you feel stuck and unmotivated. Boost your productivity, accountability and connection with The Flo Sessions. Short Flo is a 2-hour 15-minute session which includes a grounding practice and intention setting at the beginning, to bring us into our working head space. We will work in sprints of 50 minutes with a short wellbeing break (optional). We will close with a personal review and group cheerleading, ending on a high to launch you into the rest of the day. Even if you are more of an introvert, these sessions are for you, there is no pressure to talk to the group, we will use chat to share our intentions but you don't even need to do that if you'd rather not. Discover the benefits of body doubling and how it can help you to do the work! No more faffing about, get focused, get into flow and feel part of a community of women who's collective energy can push you towards your goals.

The Flo Coach

Boost your productivity and focus with The Flo Sessions

The Flo Sessions - Short Flo

<h3 style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">LEARN TO FOCUS ON INTERPERSONAL SKILLS, BEHAVIOR, AND ENVIRONMENT AND HOW TO PROMOTE DIVERSITY-POSITIVE INTERACTIONS.</h3><div style="color: rgb(33, 37, 41); box-sizing: border-box;" fr-original-style=" color: rgb(33, 37, 41);"><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">You will be able to focus on interpersonal skills, behavior, and environment, to see how they promote diversity-positive interactions, as well as learn causes for discriminatory practices and create an action plan for increasing workplace acceptance and harmony.</p><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><b fr-original-style="" style="box-sizing: border-box;">Uncover and discard beliefs and attitudes that foster or block progress</b>. By discovering your strengths as well as liabilities, you can build on the positive and move toward minimizing the negative. As a result, you will gain greater personal and professional satisfaction.</p><h3 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">PART I &ndash; BROADENING THE VIEW</h3>&nbsp;<p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Find new perspectives and ways to turn challenges into opportunities. Become skilled at ways to further develop self-awareness and sensitivity.</p><h3 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">PART II &ndash; FAIR STANDARDS</h3>&nbsp;<p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Learn about how attitudes expressed in speech and behavior promote or hinder a positive work environment. Determine and apply steps for getting past prejudice for greater productivity.</p><h3 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">PART III &ndash; ORGANIZATIONAL UNITY</h3>&nbsp;<p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Discover value in diverse perspectives and personalities and their benefits. Strategize ways to strengthen relationships and turn negative into positive interactions.</p><h3 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">ATTENDEES&nbsp;WILL BE ABLE TO:</strong></h3>&nbsp;<ul fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Discover new ways to &ldquo;see things differently;&rdquo;</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Use Emotional Intelligence to strengthen relationships and increase awareness of self and others;</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Define Diversity and uncover ways in which it is significantly useful in an organization;</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Develop best practices (rooted in honor and law) to use Diversity in planning, problem solving, and decision-making);</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Manage conflict through unity, using the organization&rsquo;s mission, vision, values, and goals; and</li><li style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Understand and communicate value to staff.</li></ul><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><i style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Online Class&mdash;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Diversity &ndash; Building a Thriving Business Environment</strong>&nbsp;is a 4-hour interactive virtual class.&nbsp;</i></p><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">&nbsp;</p><h6 style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Register for this class and you will be sent ONLINE login instructions prior to the class date.</h6></div><div style="color: rgb(33, 37, 41); box-sizing: border-box;" fr-original-style=" color: rgb(33, 37, 41);"><br fr-original-style="" style="box-sizing: border-box;"></div><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">Improving Communications brought our organization to realize how important our employees&mdash;our people&mdash;are to Baystate Dental. By helping us to develop a more thoughtful and sensitive nature, we now relate better with each other and our patients.</p><span style="color: rgb(33, 37, 41); box-sizing: border-box;" fr-original-style="color: rgb(33, 37, 41);">Dr. Kevin Coughlin, DMD, FAGD, MBA</span><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Baystate Dental</span>

LEARN TO FOCUS ON INTERPERSONAL SKILLS, BEHAVIOR, AND ENVIRONMENT AND HOW TO PROMOTE DIVERSITY-POSITIVE INTERACTIONS.
You will be able to focus on interpersonal skills, behavior, and environment, to see how they promote diversity-positive interactions, as well as learn causes for discriminatory practices and create an action plan for increasing workplace acceptance and harmony.
Uncover and discard beliefs and attitudes that foster or block progress. By discovering your strengths as well as liabilities, you can build on the positive and move toward minimizing the negative. As a result, you will gain greater personal and professional satisfaction.
PART I – BROADENING THE VIEW
Find new perspectives and ways to turn challenges into opportunities. Become skilled at ways to further develop self-awareness and sensitivity.
PART II – FAIR STANDARDS
Learn about how attitudes expressed in speech and behavior promote or hinder a positive work environment. Determine and apply steps for getting past prejudice for greater productivity.
PART III – ORGANIZATIONAL UNITY
Discover value in diverse perspectives and personalities and their benefits. Strategize ways to strengthen relationships and turn negative into positive interactions.
ATTENDEES WILL BE ABLE TO:
Discover new ways to “see things differently;”
Use Emotional Intelligence to strengthen relationships and increase awareness of self and others;
Define Diversity and uncover ways in which it is significantly useful in an organization;
Develop best practices (rooted in honor and law) to use Diversity in planning, problem solving, and decision-making);
Manage conflict through unity, using the organization’s mission, vision, values, and goals; and
Understand and communicate value to staff.
Online Class—Diversity – Building a Thriving Business Environment is a 4-hour interactive virtual class. 
 
Register for this class and you will be sent ONLINE login instructions prior to the class date.



Improving Communications brought our organization to realize how important our employees—our people—are to Baystate Dental. By helping us to develop a more thoughtful and sensitive nature, we now relate better with each other and our patients.
Dr. Kevin Coughlin, DMD, FAGD, MBABaystate Dental

Improving Communications Uk

DIVERSITY – BUILDING A THRIVING BUSINESS ENVIRONMENT

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">The industry standard course in UX research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Master the research skills that make UX professionals so valuable. Become a confident, credible and effective user researcher with a globally recognised qualification.</p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who is it for?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">UX professionals Aspiring UX researchers</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Duration</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">16 weeks</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Commitment</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">3 hours per week</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Format</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Online, self-paced with live support and mentoring</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why take this user research course:</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Gain the most in-demand skills* and boost your career in a thriving industry.</li><li fr-original-style="" style="box-sizing: border-box;">Learn a complete range of UX research methods. Expand your toolkit to conduct high-quality research at pace.</li><li fr-original-style="" style="box-sizing: border-box;">Become an insights expert. Translate findings into actionable insights and communicate them with conviction.</li><li fr-original-style="" style="box-sizing: border-box;">Showcase your expertise. Build a professional user research portfolio and earn a university credit-rated qualification.</li><li fr-original-style="" style="box-sizing: border-box;">Get the confidence to succeed. Count on our mentors, career advisors and student community throughout your journey.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">*Research is one of the top 10 most in-demand skills globally (LinkedIn, 2023).</p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><section style="color: rgb(15, 21, 26); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(15, 21, 26);"><section style="color: rgb(15, 21, 26); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(15, 21, 26);"><section style="color: rgb(15, 21, 26); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(15, 21, 26);"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">A comprehensive, in-depth curriculum</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This user research course has been created and validated by experts in UX research. It is credit-rated by Glasgow Caledonian University.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Self-paced learning gives you the flexibility to study in your own time. Monthly deadlines and submissions give you structure and accountability. The best of both worlds.</p></section><section style="color: rgb(15, 21, 26); box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);"><br fr-original-style="" style="box-sizing: border-box;"></section></section></section><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 1</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Introduction to user research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Understand the role of a UX researcher. Explore the types, methods and ethics of research.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 2</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Planning the research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Learn how to build a research plan, collaborate with stakeholders, recruit participants and manage data.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 3</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Fundamental user research skills</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Master the core skills of interviewing and usability testing. Learn how to moderate and take notes.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 4</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Expanding your toolkit</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Explore qualitative research methods like ethnography, contextual enquiry, service safaris and diary studies.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 5</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Analysing qualitative research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Learn to analyse research data and translate it into user goals, affinity diagrams, personas and journey maps.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 6</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Quantitative research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Learn to design, conduct and analyse online surveys, A/B tests and more.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 7</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Communicating the research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Learn how to report and present your findings with confidence.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Module 8</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">AI for user research</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Explore how AI tools can assist researchers.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Project</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Portfolio project</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Build a professional portfolio to showcase your research expertise.</p>

User Research

Professional Certificate in User Research

Early Bird Price

<p style="color: rgb(15, 21, 26); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(15, 21, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Build a rewarding career in content design</strong></p><p style="color: rgb(15, 21, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);">Build a rewarding career in content design with a globally recognised, industry-approved qualification. Get the mindset, the confidence and the skills that will help you stand out in a rapidly growing industry.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong style="color: rgb(15, 21, 26); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);">Why take this course:</strong></p><ul style="color: rgb(15, 21, 26); box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);"><li fr-original-style="" style="box-sizing: border-box;">Be in demand. Certified qualifications will help you stand out in a fast-growing industry</li><li fr-original-style="" style="box-sizing: border-box;">Build a career with impact. Design content experiences that will influence users worldwide</li><li fr-original-style="" style="box-sizing: border-box;">Broaden your opportunities. Optimise your skills to get hired at leading companies</li><li fr-original-style="" style="box-sizing: border-box;">Get qualified. Earn a&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">university credit-rated certification</strong>&nbsp;approved by industry leaders</li><li fr-original-style="" style="box-sizing: border-box;">Gain the confidence you need to succeed. Our mentors, career advisors and student community will support you all the way</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong style="color: rgb(15, 21, 26); font-weight: 700; box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);">University credit-rated, industry-approved</strong></p><p style="color: rgb(15, 21, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);">Our content design course is credit-rated by Glasgow Caledonian University and has been reviewed and endorsed by leaders in the tech industry. It covers everything you need to become a certified content design professional.</p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Study method</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Online, self-paced</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Duration</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">10 weeks</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Access to content</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">12 months</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Qualification</strong></p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Professional Certificate in Content Design<br fr-original-style="" style="box-sizing: border-box;">Awarded by Scottish Qualifications Authority trading as SQA</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Additional info</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Exam(s) / assessment(s) is included in price</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Tutor is available to students</p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><section style="color: rgb(15, 21, 26); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(15, 21, 26);"><section style="color: rgb(15, 21, 26); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(15, 21, 26);"><section style="color: rgb(15, 21, 26); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(15, 21, 26);"><h2 fr-original-style="" style="box-sizing: border-box;">Description</h2><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">In this Professional Certificate in Content Design course you will learn:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">An introduction to content design.<br fr-original-style="" style="box-sizing: border-box;"></strong></strong>Understand what content design is and the role of a content designer.</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Principles of good content design<br fr-original-style="" style="box-sizing: border-box;"></strong></strong>Learn the core principles of content design and why it matters.</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Voice, tone and style<br fr-original-style="" style="box-sizing: border-box;"></strong></strong>Learn how voice, tone, and style can create a cohesive product experience.</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Understanding your users<br fr-original-style="" style="box-sizing: border-box;"></strong></strong>Uncover your audience&#39;s goals and content needs.</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Writing for interfaces<br fr-original-style="" style="box-sizing: border-box;"></strong></strong>Learn to write microcopy for buttons, notifications and other UI elements.</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">The product mindset<br fr-original-style="" style="box-sizing: border-box;"></strong></strong>Develop a product mindset by learning about product design systems and tools.</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Testing content<br fr-original-style="" style="box-sizing: border-box;"></strong></strong>Learn how to test, evaluate and improve your content.</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">AI for content design<br fr-original-style="" style="box-sizing: border-box;"></strong></strong>Learn how to use AI tools to become a more effective content designer.</li><li fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Working in content design<br fr-original-style="" style="box-sizing: border-box;"></strong></strong>Learn how to be the content champion within your organisation.</li></ul><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Support at every step</strong><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">From day one, you&rsquo;ll be part of a lively community of tutors, mentors and fellow students that support each other along the way.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Student Success team</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Our friendly and responsive team will help you stay on track and keep you accountable.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Course mentor</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your course mentor is an expert content designer who brings years of practical insight.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Student community</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Collaborate, share tips and build connections on our lively student Slack channels.</p></section><section style="color: rgb(15, 21, 26); box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);"><h2 fr-original-style="" style="box-sizing: border-box;">Who is this course for?</h2><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Writers and journalists who want to enhance their skills for the digital world</li><li fr-original-style="" style="box-sizing: border-box;">UX and UI designers who want to become more rounded professionals</li><li fr-original-style="" style="box-sizing: border-box;">Content designers looking for a formal qualification that validates their expertise</li><li fr-original-style="" style="box-sizing: border-box;">Digital marketers who need content design skills to succeed in their roles</li><li fr-original-style="" style="box-sizing: border-box;">Anybody with a writing, content or design background looking for a creative tech job</li></ul></section><section style="color: rgb(15, 21, 26); box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);"><h2 fr-original-style="" style="box-sizing: border-box;">Requirements</h2><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Background</strong><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">You don&rsquo;t need experience in design or technology to enrol in our courses. To get the most value from this course, you will need some experience in writing and a genuine interest in words and language.</p><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Commitment</strong><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">You do need to be motivated and committed. We set a high bar. Studying for one of our professional qualifications requires a certain amount of time, energy and focus.</p><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">English language</strong><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To take this course, you should be fluent in verbal and written English. If English is not your first language, you should have a proficiency of C1 as defined by the CEFRL (Common European Framework of Reference for Languages).</p></section></section></section><section style="color: rgb(15, 21, 26); box-sizing: border-box;" fr-original-style=" color: rgb(15, 21, 26);"><br fr-original-style="" style="box-sizing: border-box;"></section>

335 Courses in Cardiff

Combustion Engineering for Coal Fired Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Design Of Circulating Fluidized Bed Boilers

By EnergyEdge - Training for a Sustainable Energy Future

Root Cause Analysis for Boilers and Steam Cycle Failures

By EnergyEdge - Training for a Sustainable Energy Future

Commissioning and Start-Up Activities of Coal Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

An Introduction to Leadership & Management

By Switch Direction

Assessing the Water-Steam Chemistry Cycle in Thermal Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Transformer Maintenance

By EnergyEdge - Training for a Sustainable Energy Future

Petroleum Geology for Non-Geologists

By EnergyEdge - Training for a Sustainable Energy Future

Scrum Master Exam Prep: In-House Training

By IIL Europe Ltd

The Impact of Electric Vehicles (EVs) on the Grid

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location