<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong><em> </em></h2>
<p>This five-day course provides an intermediate level of understanding of the geomechanical factors that affect wellbore instability, sand production and hydraulic fracture design.  The course is structured such that upon completion, participants will have understood the value that geomechanics can bring to drilling, completion and production operations and will be able to leverage this value wherever it applies.  The course emphasis will be on integrating the topics presented through a combination of lectures, case-studies and hands-on exercises. A special focus will be on how geomechanics knowledge is extracted from routinely acquired well data and how it is applied in the prediction and prevention of formation instability.</p>
<p><strong>Course Highlights</strong></p>
<p>The course is essentially non-mathematical and makes wide use of diagrams, pictures and exercises to illustrate the essential concepts of geomechanics</p>
<ul>
<li>Essential Rock Mechanics Principles</li>
<li>Wellbore Stability Analysis</li>
<li>Anisotropic Rock Properties for unconventional projects</li>
<li>Lost Circulation and Wellbore Strengthening applications</li>
<li>Sand Production Management</li>
<li>Input to Hydraulic Fracture design</li>
<li>Salt instability</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><strong>By attending this training, you will be able to acquire the following:</strong></p>
<ul>
<li>Apply the basic concepts of geomechanics to identify, predict and mitigate against formation instability during drilling, completion and production</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is intended for Drilling Engineers, Well Engineers, Production Technologists, Completion Engineers, Well Superintendents, Directional Drillers, Wellsite Supervisors and others, who wish to further their understanding of rock mechanics and its application to drilling and completion.</p>
<p>There is no specific formal pre-requisite for this course.  However, attendees are requested to have been exposed to drilling, completions and production operations in their positions and to have a recommended minimum of 3 years of field experience.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your Expert Course Instructor is an operational geomechanics advisor with over 46 years of experience in exploration, development and production in the upstream oil and gas industry.  After obtaining a BSc (Hons) Physics degree from Aberdeen University, he worked for a variety of oil service companies in wireline operations, management and formation evaluation, before joining Schlumberger in 1995.  Since 2000 he has worked principally in real-time geomechanics operations and developing acousto-geomechical applications, taking on the role of geomechanics advisor and technical manager within the Europe-Africa area of operations.  Before forming his own company in 2014, Your Expert Course Instructor was one of Schlumberger's principal instructors, delivering cross-discipline internal and external geomechanics training to petrophysicists, geologists, reservoir, petroleum, well construction and drilling engineers at operating company locations, training centers and operational centers worldwide.  Through extensive operational and wellsite experience gained in the North Sea, Europe, Africa, South America and the Far East, he has gained a broad based knowledge of drilling, production, log data acquisition, analysis and interpretation that has allowed him to develop and deliver pragmatic solutions to the geomechanical challenges of drilling, sand production, fracturing and unconventional reservoirs, faced by operators.</p>
<p>His principal interests include the development and application of acousto-geomechanical techniques for the evaluation of anisotropic formations and fracture systems and the identification and prevention of wellbore instability</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Geomechanics

Team of 10, pp

Normal Fee, pp

London

<h2>PRINCE2® Practitioner</h2>: In-House Training
<p>Projects fail for a variety of reasons including poor planning, lack of defined quality criteria, poor understanding of the business drivers, inadequate control, and lack of senior management involvement  in other words, lack of a structured best practice approach to project delivery.</p>
<p>PRINCE2® (6th Edition is the current version) is a structured, process-based approach for project management providing a methodology which can be easily tailored and scaled to suit all types of projects. It is the de facto standard for project management in the UK Government and is also used extensively in more than 150 countries worldwide with in excess of 20,000 organizations already benefitting from its powerful approach. It can be used easily in combination with PMI®'s PMBOK® Guide to provide a robust project methodology, or to augment an existing PMBOK®-based methodology with additional rigor around areas such as Quality, Organization, and Benefits Realization.</p>
<p>The goals of this course are to take participants to the next level of understanding and application of the PRINCE2® methodology and to prepare them to sit the Practitioner exam. Using APMG provided sample exam papers and additional project case studies, participants will learn how to apply what they learned during the Foundation course and how to approach the OTE Practitioner exam, which is aimed at testing their ability to apply PRINCE2® in an actual project environment simulated via a case study provided as part of the exam.</p><h3>What you will Learn</h3>
<p>You'll learn how to:</p>
<ul>
<li>Tailor and apply the principles, themes, process structure, techniques, and management products of PRINCE2® within a work environment, via carefully selected case studies</li>
<li>Define the PRINCE2® 6th Edition method at the Practitioner level</li>
<li>Prepare for and take the Practitioner exam</li>
</ul><section>
                    <h3>Getting Started</h3><ul><li>Introductions</li><li>Course structure</li><li>Course goals and objectives</li></ul><h3>Tailoring PRINCE2®</h3><ul><li>Tailoring PRINCE2®</li><li>Adopting PRINCE2®</li><li>Tailoring PRINCE2® to suit different projects</li><li>Adopting PRINCE2® in an organizational environment</li></ul><h3>Controlled Start</h3><ul><li>Recap management products</li><li>Study business case and risk</li><li>Study activities and responsibilities in:</li><li>Starting up a project</li><li>Initiating a project</li></ul><h3>Controlled Progress</h3><ul><li>Study management products and risk</li><li>Study activities and responsibilities in:</li><li>Getting work done</li><li>Monitoring and reporting</li><li>Issues and escalation</li></ul><h3>Controlled Close</h3><ul><li>Study Activities and Responsibilities in Closing a Project</li><li>Activities and roles</li><li>Roles and Responsibilities</li><li>Principles Exercise</li></ul><h3>Product-basedPlanning</h3><ul><li>Producing a product breakdown structure (PBS)</li><li>Producing a product flow diagram (PFD)</li><li>Linking product breakdown structures and product flow diagrams to product descriptions</li></ul>


                </section>

IIL Europe Ltd

PRINCE2 Practitioner: In-House Training

General Admission

<div>
</div>
<section>
<div>
<h2>About this VILT </h2>
<p>Tripod can be used in any area of business where the organisation has a management system in place to prevent unwanted events e.g., health, safety, environment, quality, security, productivity, project management, and many more</p>
<p>Tripod Beta is one of several tools based on Tripod's fundamental principles. Tripod Beta is based on proven theories, man years of academic research, and testing in the workplace. The Swiss Cheese Model originated from this work. <br /><br />Features of the methodology are: <br />1) the Tripod Beta diagram; it provides an easy-to-read summary of the entire investigation on a single page, <br />2) it accommodates deficiencies in leadership and worker participation, <br />3) it accommodates deficiencies in human behaviour, and <br />4) it highlights missing controls (not just controls that failed). <br /><br />Quality throughout all aspects of Tripod is assured by the Stichting Tripod Foundation (STF) and the Energy Institute.</p>
<p>The participants will gain a theoretical understanding of the Tripod Beta methodology and terminology. They will be able to read Tripod diagrams and reports, and be able to assist incident investigation/analysis as a team member.  This is the first step to becoming an accredited silver or gold practitioner. </p>
<p>Tripod Beta Practitioner Accreditation is meant to build these skills, through a blend of support, coaching and assessments. Feedback is provided on Tripod incident investigation reports, giving the Practitioner the opportunity to hone their skills and become confident in their ability to use Tripod effectively.</p>
<figure></figure>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will be able to:</p>
<ul>
<li>Pass the Tripod Beta Practitioner (Bronze Level) exam</li>
<li>Act as a team member or Tripod facilitator on an incident investigation</li>
<li>Plan and schedule activities for an incident investigation</li>
<li>Focus line of enquiry during an investigation</li>
<li>Engage with the most relevant people at each stage of the investigation</li>
<li>Describe the incident causation paths in terms that align with their management system</li>
<li>Consider issues relating to leadership, worker participation and human behaviour</li>
<li>Assess the quality of an incident report</li>
<li>Apply the process to any type of unwanted event that should have been prevented by a management system e.g., health, safety, environment, financial, security, productivity, quality, project management etc.</li>
<li>Combine the findings from many incidents with data from other initiatives e.g., audits and inspections, to spot trends to prioritise actions and product a single improvement plan</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The course is recommended for anyone who is expected to play a role in designing, reviewing, auditing, and following your organizations OH&amp;S management system. Successful participants will be awarded the Stitching Tripod Foundation Tripod Beta Bronze certificate. The following oil &amp; gas company personnel will benefit from the knowledge shared in this course:</p>
<ul>
<li>CEO</li>
<li>Team Leaders</li>
<li>Legal, insurance and finance departments</li>
<li>Managers (Line and Function)</li>
<li>Maintenance Engineers</li>
<li>Quality Assurance Engineers</li>
<li>Process Engineers</li>
<li>Incident Investigators (Team member &amp; Tripod facilitator)</li>
<li>Project Managers</li>
<li>System Custodians</li>
<li>Technical Authorities</li>
<li>Key Contractor's Management</li>
<li>Contract Managers/Holders</li>
<li>Safety Representatives</li>
<li>Risk Management Engineers</li>
<li>HSE Advisors</li>
<li>Supervisors</li>
<li>Auditors</li>
<li>Regulators</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has over 30 years of experience in construction, operations and maintenance with the upstream exploration and production sector. He joined Shell International E&amp;P in 1971 and for 28 years worked in several locations around the world. Following the Piper Alpha incident he led Shell's two year, Â£10M major overhaul of their permit to work system. He first made use of the Tripod Beta principles during this period and since then he has delivered over 100 Tripod Beta courses in more than 25 locations around the world. He is a Chartered Engineer, a member of the Institution of Engineering and Technology and holds a postgraduate diploma from the University of Birmingham (UK).</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Tripod Beta Practitioner - Bronze Level

Loughborough

<div>
		

		<div>
			
			<p>In today's dynamic business environment, Managers need to evaluate different courses of action and make decisive decisions. 
</p>
			<div><i></i> 2 Hours</div>
			<div><i></i>  £240.00 incl. VAT</div>
			
			
		</div>
	</div>

	

	<div id="filters">
		
		
	</div>

	

    <div>

		
		 
		

		<div></div>

		<div>
			<p>Want to run this event in-house?  Enquire about running this event in-house </p>
			
		</div>

		<div>
			<p>Interested in attending? Have a suggestion about running this event near you?<br />Register your interest now</p>
			
		</div>
	</div>
	<div></div>
	
		
        <div>
			
		</div>
				

	
		<h3>Description</h3>
		<p></p><p>'Stay committed to your decisions, but stay flexible in your approach.' (Tom Robbins) In today's dynamic business environment, Managers need to evaluate different courses of action, make decisions, defend or adapt decisions and communicate conclusions to stakeholders in order to deliver outstanding performance.</p>
<p></p>
	
		<h3>Modules/Lessons</h3>
		<p></p><p><strong>Outcomes: </strong></p>
<ul>
<li>Explain how to effectively apply a number of Decision Making models</li>
<li>Describe how to establish root cause for a problem</li>
<li>List the reasons for reviewing, and learning from decisions made</li>
</ul>
<p><strong>Content:</strong></p>
<ul>
<li>The three types of decision</li>
<li>Are all Problems Worth Solving?</li>
<li>We Just Don't Know What to doâ¦</li>
<li>Establishing Root Cause</li>
<li>Using a Different Perspective</li>
<li>Learning from Failure and Success</li>
<li>Reviewing the Decision</li>
<li>The Five Characteristics of a Good Decision Maker</li>
</ul>
<p><strong>Modules:</strong></p>
<p><strong>Introduction to decision making</strong></p>
<ul>
<li>The three choices we always have</li>
<li>How many squares - the challenges of 'assumed constraints'</li>
</ul>
<p><strong>Are all problems worth solving?</strong></p>
<ul>
<li>The risk of making the decision against the risk of not making one</li>
<li>The Pareto Principle</li>
<li>Force Field Analysis</li>
</ul>
<p><strong>We just don't know what toâ¦</strong></p>
<ul>
<li>How to use a paper clip</li>
<li>Brainstorming</li>
<li>Affinity Diagrams</li>
</ul>
<p><strong>Establishing Root Cause</strong></p>
<ul>
<li>'I thought I had solved thatâ¦'</li>
<li>The Five Whys</li>
<li>Ishikawa / Fishbone</li>
</ul>
<p><strong>Using a different perspective</strong></p>
<ul>
<li>De Bono's Thinking Hats</li>
</ul>
<p><strong>We won't get it right every time!</strong></p>
<ul>
<li>Learning from failure, and success!</li>
<li>Reviewing the decision - it doesn't finish at implementation</li>
<li>The five characteristics of a good decision maker</li>
</ul>
<p></p>

Mpi Learning - Professional Learning And Development Provider

In today's dynamic business environment, Managers need to evaluate different courses of action and make decisive decisions.

Decision Making for Managers

<p><strong>Course Objectives</strong></p> <p>At the end of this course you will be able to:</p> <ul> <li>Modify the PowerPoint environment</li><li>Using Master View in order to customise a design template</li><li>Add and customize SmartArt graphics</li><li>Add animations and change its effect options</li><li>Add action buttons to control the flow of the presentation</li><li>Use various options to customise slide shows</li><li>Use different PowerPoint file types to distribute presentations</li></ul> <p>' 1 year email support service</p> <p>Take a closer look at the <strong>consistent excellent feedback from our growing corporate clients</strong> visiting our site <em><strong>ms-officetraining co uk</strong></em></p> <p><em><strong>Customer Feedback</strong></em></p> <ul> <li> <p><strong>Very clearly explained</strong></p> </li><li> <p><strong>Good pace.</strong></p> </li><li>Lucy Tailor - ACER</li></ul> <p>'</p> <p>With more than 20 years experience, we deliver courses on all levels of the Desktop version of <strong>Microsoft Office and Office 365</strong>; ranging from Beginner, Intermediate, Advanced to the VBA level.</p> <p>Our trainers are Microsoft certified professionals with a proven track record with several years experience in delivering<strong> public, one to one, tailored and bespoke courses.</strong></p> <ul> <li><strong>Our competitive rates <strong>start from £550.00 per day of training</strong></strong></li></ul> <p><strong><strong>Tailored training courses:</strong></strong></p> <p>You can choose to run the course exactly as they are outlined by us or we can customise it so that it meets your specific needs. A tailored or bespoke course will follow the standard outline but may be adapted to your specific organisational needs.</p><p><strong>Customising the PowerPoint Environment</strong></p> <ul> <li>Customise the User Interface</li><li>Set PowerPoint Options</li></ul> <p><strong>Customising Design Templates</strong></p> <ul> <li>Modify Slide Masters and Slide Layouts</li><li>Add Headers and Footers</li><li>Modify the Notes Master and the Handout Master</li></ul> <p><strong>Adding SmartArt to a Presentation</strong></p> <ul> <li>Create SmartArt</li><li>Modify SmartArt</li></ul> <p><strong>Working with Media</strong></p> <ul> <li>Add Audio to a Presentation</li><li>Add Video to a Presentation</li></ul> <p><strong>Working with Animations</strong></p> <ul> <li>Entrance, Emphasis and Exit Animations</li><li>Animate Charts by Category and Series</li><li>Customise Animations and Transitions</li></ul> <p><strong>Collaborating on a Presentation</strong></p> <ul> <li>Review a Presentation</li><li>Store and Share Presentations on the Web</li></ul> <p><strong>Customising a Slide Show</strong></p> <ul> <li>Annotate a Presentation</li><li>Set Up a Slide Show</li><li>Create a Custom Slide Show</li><li>Add Hyperlinks</li><li>Add Action Buttons</li><li>Record a Presentation</li></ul> <p><strong>Securing and Distributing a Presentation</strong></p> <ul> <li>Secure a Presentation</li><li>Create a Video or a CD</li><li>Distribute the Presentation in different File Formats</li></ul><h2>
        
            Who is this course for?
        
        <div>Who is this course for?</div>
    </h2>

                        <div id="who_is_this_course_for">
                             <p>This course is designed for delegates who want to gain the skills necessary to work with design templates, various types of diagrams, special effects, custom slide shows, collaboration functionality, and advanced presentation delivery.</p> 
                        </div><h2>
        
            Requirements
        
        <div>Requirements</div>
    </h2>

                        <div id="requirements">
                             <p>Preferably, delegates should have attended the Powerpoint Introduction course.</p> 
                        </div><h2>
        
            Career path
        
        <div>Career path</div>
    </h2>

                        <div id="career_path">
                             <p>Microsoft Office know-how can instantly increase your job prospects as well as your salary.</p> <p>80 percent of job openings require spreadsheet and word-processing software skills</p> 
                        </div><h2>
        
            Certificates
        
        <div>Certificates</div>
    </h2>

                        <div id="optional_extras">
                                    <h4>Certificate of completion</h4>
        <p>
            Digital certificate -
            Included
        </p>

                        </div>

Microsoft Office Training

Microsoft Powerpoint Advanced - In-company (now with live online classes)

Harpenden

<p>This one-day workshop is designed to give participants an understanding of the fundamentals of Microsoft Word and its commands, with quick ways to enter text, control formatting and edit paragraphs.</p>This course will help participants:<ul><li>Create, manage and save documents, files and folders</li><li>Create paragraph lists, bulleted and numbered paragraphs</li><li>Edit, modify and format paragraphs</li><li>Create and format tables</li><li>Use shortcuts to navigate documents</li><li>Format the layout of documents</li><li>Manage page headers and footers</li><li>Insert and managing pictures and diagrams within a document</li><li>Learn time saving tips and tricks to obtain a professional finish to documents</li><li>Use printing options</li></ul><section>
                    <h3>1 Creating documents</h3><ul><li>Getting help</li><li>Creating and saving documents</li><li>Accessing recently used documents</li><li>Managing files and folders</li></ul> <h3>2 Entering and editing text</h3><ul><li>Inserting and editing paragraph text</li><li>Cutting, copying and pasting text</li><li>Using tool tips to manage content</li><li>Applying and removing text formatting</li><li>Correcting spelling and grammar</li></ul> <h3>3 Creating paragraph lists</h3><ul><li>Creating bulleted paragraphs</li><li>Creating numbered paragraphs</li><li>Managing bulleted and numbered lists</li></ul> <h3>4 Modifying paragraphs</h3><ul><li>Changing paragraph alignment</li><li>Indenting a paragraph</li><li>Adding borders and shading to paragraphs</li><li>Formatting paragraphs using styles</li></ul> <h3>5 Navigating documents</h3><ul><li>Using shortcuts for navigating documents</li><li>Using 'Go To' to navigate documents</li><li>Finding and replacing text</li><li>Changing to read view</li></ul> <h3>6 Document layout</h3><ul><li>Inserting page breaks</li><li>Changing page orientation</li><li>Adjusting page margins</li><li>Adding borders to pages</li></ul> <h3>7 Page headers and footers</h3><ul><li>Inserting page headers and footers</li><li>Using header and footer commands</li><li>Inserting page numbers</li><li>Using different first page</li></ul> <h3>8 Inserting pictures and diagrams</h3><ul><li>Inserting pictures from your computer</li><li>Inserting online pictures</li><li>Flowing text around a picture</li><li>Changing a picture</li><li>Inserting SmartArt diagrams</li><li>Entering text into SmartArt</li></ul> <h3>9 Inserting tables</h3><ul><li>Using tabs to create tables</li><li>Resizing and repositioning tables</li><li>Inserting and deleting rows and columns</li><li>Using a table's commands</li><li>Changing a tables text direction</li><li>Formatting tables</li></ul> <h3>10 Printing documents</h3><ul><li>Previewing and printing documents</li><li>Using the printing tools</li><li>Printing parts of a document</li></ul> 


                </section>

The In House Training Company

Office Skills & Productivity

Microsoft Publisher

Office Skills

Office Productivity

Microsoft Office

Microsoft Word

Word - introduction (In-House)

<p>This one-day workshop is designed to enhance your PowerPoint skills to achieve dynamic presentations that work with you, making it easier to deliver a polished, professional presentation. You will learn advanced PowerPoint skills that will save you time and elevate your presentations.</p>This course will help participants:<ul><li>Create custom shows to personalise presentations for individual clients</li><li>Make the Slide Master work collectively with slide layouts and themes</li><li>Seamlessly interact with external content using links</li><li>Work with advanced animations and transitions, and video/audio tools</li></ul><section>
                    <h3>1 Themes and Masters</h3><ul><li>Add a Design theme to a presentation</li><li>Make changes to the Slide Master</li><li>Delete layouts from the slide master</li><li>Saving a slide master with themes as a template</li></ul> <h3>2 Advanced graphics and diagrams</h3><ul><li>Drawing, duplicating and resizing shapes</li><li>Grouping, aligning and stacking shapes and graphics</li><li>Using SmartArt for diagrams and organisation charts</li></ul> <h3>3 Graphs and charts</h3><ul><li>Inserting and formatting a chart</li><li>Linking an Excel chart to a slide</li><li>Linking Excel tables to a slide</li><li>Animating charts</li></ul> <h3>4 Video, Custom animation and Hyperlinks</h3><ul><li>Adding and editing video</li><li>Animating pictures and drawings</li><li>Hyperlink to another Slide or Website</li><li>Compressing and optimising media</li></ul> <h3>5 Presenting </h3><ul><li>Reuse slides</li><li>Hide slides</li><li>Rehearsing timings</li><li>Enabling a presentation to run continuously</li></ul> 


                </section>

Executive Presentation

Meeting Skills

Motion Graphics

Professional Skills Course (PSC)

Microsoft Powerpoint

Presentation Skills

PowerPoint - intermediate (In-House)

<p>This one-day workshop focuses on building a professional presentation from scratch, giving you essential hints and tips on how to utilise the key features of PowerPoint, including speaker notes, inserting charts, diagrams and pictures, and utilising slide transitions and animation. You will also learn about PowerPoint templates and themes to ensure your presentations have the best impact.</p>This course will help participants:<ul><li>Using Slide Master</li><li>Create a presentation using a template</li><li>Insert slides and change the layout</li><li>Manage slides and control formats</li><li>Enhance slides using animation, pictures, charts and graphics</li><li>Work with tables, rows, cells and columns</li><li>Create and control paragraph lists</li><li>Insert titles and labels</li><li>Effectively use slide show controls and presenter view</li><li>Print slides, handouts and notes</li></ul><section>
                    <h3>1 Introduction to PowerPoint </h3><ul><li>Navigating the features</li><li>Creating a simple presentation</li><li>Inserting new slides and changing layouts</li><li>Creating speaker notes</li></ul> <h3>2 Using Layouts in Slide Master</h3><ul><li>Editing templates in slide master</li><li>Adding a design theme</li><li>Adding transitions, pictures and logos</li><li>Using Slide Show View</li></ul> <h3>3 Drawing shapes and SmartArt</h3><ul><li>Using Drawing Tool Formats</li><li>Creating shapes</li><li>Aligning shapes and stacking order</li><li>Creating a cycle graphic</li><li>Creating an organisation chart</li></ul> <h3>4 Animation</h3><ul><li>Visually enhancing slides with animation</li><li>Using text and object animation</li><li>Adding animation to lists</li><li>Making animation work for you</li></ul> <h3>5 Presenting</h3><ul><li>Confidently running a presentation</li><li>Using presenter view</li><li>Using the slide show controls</li></ul> 


                </section>

Apple Keynote

PowerPoint - introduction (In-House)

<p>Power BI is a powerful data visualisation program that allows businesses to monitor data, analyse trends, and make decisions. This course is designed to provide a solid understanding of the reporting side of Power BI, the dashboards, where administrators, and end users can interact with dynamic visuals that communicates information.</p><p>This course focuses entirely on the creation and design of visualisations in dashboards, including a range of chart types, engaging maps, and different types of tables. Designing dashboards with KPI's (key performance indicators), heatmaps, flowcharts, sparklines, and compare multiple variables with trendlines.</p>This one-day programme focuses entirely on creating dashboards, by using the many visualisation tools available in Power BI.<p>You will learn to build dynamic, user-friendly interfaces in both Power BI Desktop and Power BI Service.</p><section>
                    <h3>1 Introduction</h3><ul><li>Power BI ecosystem</li><li>Things to keep in mind</li><li>Selecting dashboard colours</li><li>Importing visuals into Power BI</li><li>Data sources for your analysis</li><li>Joining tables in Power BI</li></ul> <h3>2 Working with data</h3><ul><li>Utilising a report theme</li><li>Table visuals</li><li>Matrix visuals</li><li>Drilling into hierarchies</li><li>Applying static filters</li><li>Group numbers with lists</li><li>Group numbers with bins</li></ul> <h3>3 Creating visuals</h3><ul><li>Heatmaps in Power BI</li><li>Visualising time-intelligence trends</li><li>Ranking categorical totals</li><li>Comparing proportions</li><li>View trends with sparklines</li></ul> <h3>4 Comparing variables</h3><ul><li>Insert key performance indicators (KPI)</li><li>Visualising trendlines as KPI</li><li>Forecasting with trendlines</li><li>Visualising flows with Sankey diagrams</li><li>Creating a scatter plot</li></ul> <h3>5 Mapping options</h3><ul><li>Map visuals</li><li>Using a filled map</li><li>Mapping with latitude and longitude</li><li>Mapping with ArcGIS or ESRI</li></ul> <h3>6 Creating dashboards</h3><ul><li>High-level dashboard</li><li>Migration analysis dashboard</li><li>Adding slicers for filtering</li><li>Promote interaction with nudge prompts</li><li>Searching the dashboard with a slicer</li><li>Creating dynamic labels</li><li>Highlighting key points on the dashboard</li><li>Customised visualisation tooltips</li><li>Syncing slicers across pages</li></ul> <h3>7 Sharing dashboards</h3><ul><li>Setting up and formatting phone views</li><li>Exporting data</li><li>Creating PDF files</li><li>Uploading to the cloud</li><li>Share dashboards in SharePoint online</li></ul> 


                </section>

Powerbi

Tableau Desktop Specialist

Microsoft Power Apps

Microsoft Power BI

Data Visualization

Microsoft BI

Power BI - dashboards (1 day) (In-House)

<p>This programme concentrates on the core planning skills needed to develop sound practical project plans in a team environment. This enables the plan to be modified should requirements change or difficulties arise.</p><p>The programme also gives participants the confidence to practise those skills and apply them in the work environment and deliver their projects more successfully in the future.</p>Participants learn fundamental project management concepts and terminology, demystifying the project management process, and, in particular, how to:<ul><li>Break a project down into manageable sections and ensure nothing is left out</li><li>Understand and apply estimating techniques to develop realistic estimates</li><li>Sequence work effectively and carry out critical path analysis to determine project duration and which tasks to pay closest attention to</li><li>Manage project risk effectively to protect project value</li><li>Monitor, control and re-plan the project to best keep it on track</li><li>Close out the project and ensure the project comes to an orderly end</li></ul><section>
                    <h3>1 Introduction</h3><ul><li>Self-introductions and personal objectives</li><li>Course objectives</li><li>Sharing of project issues</li></ul> <h3>2 Project management concepts</h3><ul><li>Characteristics of a project and what should be kept as operational responsibilities</li><li>Understanding the triple and quadruple constraints - and their limitations</li><li>Prioritising requirements through the MOSCOW technique</li><li>Product <em>v</em> project life cycle</li><li>Key project roles and responsibilities - the importance of sponsorship and clarity of roles</li></ul> <h3>3 Starting a project, and the importance of the terms of reference / project brief</h3><ul><li>Avoiding the pressure to 'just do it'!</li><li>The importance and benefits of planning</li><li>The best time to learn!</li><li>Initial project documentation - the BOSCARDI approach</li></ul> <h3>4 Breaking the work down</h3><ul><li>Understanding alternative breakdown structures such as the product breakdown structure and work breakdown structure</li><li>Guidelines for creating a work breakdown structure to ensure the full work scope is identified</li></ul> <h3>5 Estimating</h3><ul><li>Alternative estimating techniques and associated confidence levels</li><li>Further considerations - loss and resource factors</li></ul> <h3>6 Organising the work</h3><ul><li>Use of network diagrams to develop a clear sequence of work</li><li>Critical path analysis and calculating the project duration and task float - and usage</li></ul> <h3>7 The management of project risk</h3><ul><li>Understanding the nature of project risk</li><li>The risk analysis and risk management processes</li><li>How to best manage threats and opportunities</li><li>Running a risk workshop</li><li>Using the risk register</li></ul> <h3>8 Scheduling the work</h3><ul><li>The importance of the Gantt chart and understanding its limitations</li><li>The Gantt chart layout and using alternative views such as the tracking Gantt</li><li>Using alternative dependencies</li></ul> <h3>9 Resource issues</h3><ul><li>Assigning resources and resolving resource overloads</li><li>Crashing and fast-tracking your project and potential issues to look out for</li></ul> <h3>10 Controlling the project</h3><ul><li>The control cycle and alternative feedback mechanisms</li><li>Alternative progress reporting</li><li>Assessing the impact</li><li>The importance of re-planning</li><li>The benefits of control</li><li>Change control - the importance of impact analysis</li><li>The steps of change control and the use of the issue register</li></ul> <h3>11 Closing the project</h3><ul><li>The project closure checklist</li><li>Reviewing the project - things to avoid</li><li>Developing meaningful lessons and ensuring they are applied effectively</li><li>The post-project review - its importance to the organisation</li></ul> 


                </section>

Project Management Institute (PMI)

Project Management Qualification (PMQ)

Project Leadership

Project Management Professional (PMP)

Project Management

Google Project Management

Project planning and control (In-House)

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is intended for entry-level computer support professionals with a basic knowledge of computer hardware, software, and operating systems who wish to increase their knowledge and understanding of networking concepts and acquire the required skills to prepare for a career in network support or administration, or who wish to prepare for the CompTIA Network+ certification. CompTIA Network+ is the first certification IT professionals specializing in network administration and support should earn. Network+ is aimed at IT professionals with job roles such as network administrator, network technician, network installer, help desk technician, and IT cable installer. This course is also designed for students who are seeking the CompTIA Network+ certification and who want to prepare for the CompTIA Network+ N10-008 Certification Exam.</p>Overview<p>In this course, you will describe the major networking technologies and systems of modern networks and configure, manage, and troubleshoot modern networks. Explain the OSI and TCP/IP Models. Explain properties of network traffic. Install and configure switched networks. Configure IP networks. Install and configure routed networks. Configure and monitor ports and protocols. Explain network application and storage issues. Monitor and troubleshoot networks. Explain network attacks and mitigations. Install and configure security devices. Explain authentication and access controls. Deploy and troubleshoot cabling solutions. Implement and troubleshoot wireless technologies. Compare and contrast WAN technologies. Use remote access methods. Identify site policies and best practices.</p><p>CompTIA's Network+ certification is a foundation-level certification designed for IT professionals with around one year of experience, whose job role is focused on network administration.<br /><br />The CompTIA Network+ exam will certify the successful candidate has the knowledge and skills required to troubleshoot, configure, and manage common network devices; establish basic network connectivity; understand and maintain network documentation; identify network limitations and weaknesses; and implement network security, standards, and protocols. The candidate will have a basic understanding of enterprise technologies, including cloud and virtualization technologies.  <br /><br /> The Official CompTIAÂ© Network+Â© (Exam N10-008): will teach you the fundamental principles of installing, configuring, and troubleshooting network technologies and help you to progress a career in network administration. In this course, you will build on your existing user-level knowledge and experience with personal computer operating systems and networks to master the fundamental skills and concepts that you will need to use on the job in any type of networking career.</p>Prerequisites<p></p><ul><li>CompTIA A+ Certification (Exams 220-1001 and 220-1002)</li></ul><p></p></div><div id="course-pills-2"><h3>1 - Explaining the OSI and TCP/IP Models</h3> <ul> <li>Topic A: Explain OSI Model Layers</li> <li> Topic B: Explain the TCP/IP Suite</li> </ul> <h3>2 - Explaining Properties of Network Traffic</h3> <ul> <li>Topic A: Explain Media Types and Access Methods</li> <li> Topic B: Deploy Ethernet Standards</li> <li> Topic C: Configure and Monitor Network Interfaces</li> </ul> <h3>3 - Installing and Configuring Switched Networks</h3> <ul> <li>Topic A: Install and Configure Hubs and Bridges</li> <li> Topic B: Install and Configure Switches</li> <li> Topic C: Compare and Contrast Network Topologies</li> <li> Topic D: Compare and Contrast Network Types</li> </ul> <h3>4 - Configuring IP Networks</h3> <ul> <li>Topic A: Configure IPv4 Addressing Components</li> <li> Topic B: Test IP Interfaces with Command Line Tools</li> <li> Topic C: Configure IPv4 Subnets</li> <li> Topic D: Configure Private and Public IPv4 Addressing Schemes</li> <li> Topic E: Configure IPv6 Addressing Components</li> <li> Topic F: Configure DHCP Services</li> </ul> <h3>5 - Installing and Configuring Routed Networks</h3> <ul> <li>Topic A: Explain Characteristics of Routing</li> <li> Topic B: Install and Configure Routers</li> </ul> <h3>6 - Configuring and Monitoring Ports and Protocols</h3> <ul> <li>Topic A: Explain the Uses of Ports and Protocols</li> <li> Topic B: Use Port Scanners and Protocol Analyzers</li> <li> Topic C: Explain the Use of Name Resolution Services</li> <li> Topic D: Configure DNS and IPAM Services</li> </ul> <h3>7 - Explaining Network Application and Storage Services</h3> <ul> <li>Topic A: Explain the Uses of Network Applications</li> <li> Topic B: Explain the Uses of Voice Services and Advanced Networking Devices</li> <li> Topic C: Explain the Uses of Virtualization and Network Storage Services</li> <li> Topic D: Summarize the Concepts of Cloud Services</li> </ul> <h3>8 - Monitoring and Troubleshooting Networks</h3> <ul> <li>Topic A: Monitor Network Interfaces and Logs</li> <li>Topic B: Explain Network Troubleshooting Methodology</li> <li>Topic C: Troubleshoot Common Network Services Issues</li> </ul> <h3>9 - Explaining Networking Attacks and Mitigations</h3> <ul> <li>Topic A: Summarize Common Networking Attacks</li> <li>Topic B: Explain the Characteristics of VLANs</li> <li>Topic C: Explain the Characteristics of NAT and Port Forwarding</li> </ul> <h3>10 - Installing and Configuring Security Devices</h3> <ul> <li>Topic A: Install and Configure Firewalls and Proxies</li> <li>Topic B: Explain the Uses of IDS/IPS and UTM</li> </ul> <h3>11 - Explaining Authentication and Access Controls</h3> <ul> <li>Topic A: Explain Authentication Controls and Attacks</li> <li>Topic B: Explain the Uses of Authentication Protocols and Directory Services</li> <li>Topic C: Explain the Uses of Port Security and NAC</li> <li>Topic D: Implement Network Device Hardening</li> <li>Topic E: Explain Patch Management and Vulnerability Scanning Processes</li> </ul> <h3>12 - Deploying and Troubleshooting Cabling Solutions</h3> <ul> <li>Topic A: Deploy Structured Cabling Systems</li> <li>Topic B: Deploy Twisted Pair Cabling Solutions</li> <li>Topic C: Test and Troubleshoot Twisted Pair Cabling Solutions</li> <li>Topic D: Deploy Fiber Optic Cabling Solutions</li> </ul> <h3>13 - Implementing and Troubleshooting Wireless Technologies</h3> <ul> <li>Topic A: Install and Configure Wireless Technologies</li> <li>Topic B: Troubleshoot Wireless Performance Issues</li> <li>Topic C: Secure and Troubleshoot Wireless Connectivity</li> </ul> <h3>14 - Comparing and Contrasting WAN Technologies</h3> <ul> <li>Topic A: Compare and Contrast WAN Core Service Types</li> <li>Topic B: Compare and Contrast WAN Subscriber Service Types</li> <li>Topic C: Compare and Contrast WAN Framing Service Types</li> <li>Topic D: Compae and Contrast Wireless and IoT WAN Technologies</li> </ul> <h3>15 - Using Remote Access Methods</h3> <ul> <li>Topic A: Use Remote Access VPNs</li> <li>Topic B: Use Remote Access Management Methods</li> </ul> <h3>16 - Identifying Site Policies and Best Practices</h3> <ul> <li>Topic A: Manage Networks with Documentation and Diagrams</li> <li>Topic B: Summarize the Purposes of Physical Security Devices</li> <li>Topic C: Compare and Contrast Business Continuity and Disaster Recovery Concepts</li> <li>Topic D: Identify Policies and Best Practices</li> </ul></div>

Nexus Human

CompTIA Network+

Cisco Certified Entry Networking Technician (CCENT)

IT Networking Fundamentals

CompTIA A+

Computer Networking

CompTIA Security+

Tom Reynolds

Product Management

Agile

Agile PM

Productivity

Kanban

Agile Coach

Attend our world class Kanban University accredited Certified Kanban System Design training course and learn to implement Kanban in your company

Certified Kanban System Design – KMP I - 24-26 September

Standard

Early Bird

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Microsoft Visio is a powerful tool for creating diagrams, flowcharts, organizational charts, and other visual representations of data. In this online course, you will learn how to use Visio&#39;s features and functions to design and customize professional-looking diagrams for various purposes and audiences. You will also learn how to collaborate with others, share your diagrams, and publish them in different formats. By the end of this course, you will be able to create and edit Visio diagrams with confidence and efficiency.</p>

Microsoft Visio is a powerful tool for creating diagrams, flowcharts, organizational charts, and other visual representations of data. In this online course, you will learn how to use Visio's features and functions to design and customize professional-looking diagrams for various purposes and audiences. You will also learn how to collaborate with others, share your diagrams, and publish them in different formats. By the end of this course, you will be able to create and edit Visio diagrams with confidence and efficiency.

IT's Easy Training

Business Process Model & Notation (BPMN)

Visio

Microsoft Visio

Process Modelling

Business Process Modeling

Are you looking for a way to create stunning diagrams, flowcharts, and visuals for your projects? Do you want to learn how to use Microsoft Visio, the industry-standard software for diagramming and vector graphics? If so, then this online course is for you!

In this course, you will learn everything you need to know about Microsoft Visio, from the basics to the advanced features. You will learn how to create and edit different types of diagrams, such as business process models, organisational charts, network diagrams, floor plans, and more. You will also learn how to customize your diagrams with shapes, colours, themes, styles, and data. You will discover how to collaborate with others on your diagrams using co-authoring, commenting, and sharing features. And you will explore how to integrate your diagrams with other Microsoft Office applications, such as Word, Excel, PowerPoint, and Outlook.

By the end of this course, you will be able to create professional-looking diagrams that communicate your ideas clearly and effectively.  Whether you are a beginner or an expert, this course will help you master Microsoft Visio and take your diagramming skills to the next level.


<div id="course-pills-1">Duration<p>3 Days</p><p>18 CPD hours</p>This course is intended for<p>The primary audience for this course is an IT, facilities or data centre operations professional working in and around the data centre and having the responsibility to achieve and improve high-availability and manageability of the data centre.</p>Overview<p>After completion of the course the participant will be able to:? Understand the design life cycle of data centres and the stages involved? Discuss the data centre requirements in great level of detail with vendors, suppliers and contractors to ensure that these requirements are met? Validate design plans, quotes and offers proposed by vendors/contractors? Understand redundancy levels for both the data centre design/setup and maintenance? Understand the various building considerations such as bullet proofing, mitigation of seismic activity, fire ratings and thermal stability? Understand how to install a raised floor that meets requirements, avoiding misalignment, level differences and leakage? Understand how to read a Single Line Electrical Diagram to identify and avoid the most common design issues? Choose the correct UPS and parallel configuration, learn and avoid classic parallel installation mistakes? Understand how to calculate battery banks, validate offered configurations to ensure they meet requirements? Understand what distance to keep to avoid EMF issues for human safety and equipment disturbances? Understand the fundamental cooling setup, CFM, Delta-T and other important factors? Understand contamination factors and limitations? Understand full details of fire suppression options, how to calculate gas content and verify installations? Understand how to measure data centre energy efficiency and how to improve it</p><p>The course will bring participants to the level of a suitable sparring partner with suppliers. They will be able to verify offers provided by vendors for correctness, effectiveness and efficiency.</p></div><div id="course-pills-2"><h4>Data Centre Design/Life Cycle Overview</h4><ul><li>Overview of the phases of a data centre life cycle<br />Planning, re-alignment and continuous improvement</li></ul><h4>Standards and Rating Level Definitions</h4><ul><li>Rating level history<br />Difference between Uptime and TIA-942<br />Rating level definitions<br />Redundancy options (N+1), 2N, 2(N+1)<br />Concurrent Maintainability/Compartmentalisation<br />Example configurations<br />Substation and feed requirements<br />Maintenance options<br />Operational processes guidelines/standards<br />Skill development</li></ul><h4>Building Considerations</h4><ul><li>Building location considerations<br />Floor and hanging loads requirements<br />Fire rating for walls and glass<br />Blast protection<br />Bullet proofing<br />Forced entry protection</li></ul><h4>Advanced Raised Floor &amp; Suspended Ceiling</h4><ul><li>Raised floor installation guidelines<br />Techniques to install a proper and leveled raised access floor<br />Common mistakes<br />Choosing the right tiles and their locations<br />Seismic-mitigating floor constructions<br />Choosing the correct suspended ceiling</li></ul><h4>Advanced Power</h4><ul><li>Power infrastructure layout;<br />Formulas which you should know for the data centre<br />Single Line Electrical diagrams; how to read to ensure key components are present for protection<br />Over current protection devices (MCB/MCCB/VCB/ACB/Fuses) definitions and what to use where<br />Earth Leakage devices (RCB/RCD/ELCB/GFCI/ALCI/RCBO), definitions and what to use where<br />Sizing of protective components<br />Lightning strikes and surge protection devices (TVSS/SPD), how they operate, where to use and how to install<br />Power cabling and cable run considerations<br />PDU/DB setup and minimum requirements<br /><br />Generators;<br />Generator types: Standy/Prime/Continuous<br />Component make up and functions<br />Fuel storage and calculation<br />Paralleling of gen-sets<br />Generator room/area requirements<br /><br />UPS Systems;<br />Required specifications for UPS systems<br />How to read data sheets and select the correct UPS<br />Requirements for parallel configurations and avoid pitfalls such as single point of failures<br />How parallel installation should be done, classic mistakes made by installers and how to avoid these<br /><br />Harmonic Filters;<br />Active/Passive filters and their application<br /><br />Battery Banks;<br />Battery bank terminology<br />Designing battery banks, how to calculate, and double check the battery bank to be installed<br />Battery charging pitfalls and ensuring the right charger is being installed and used<br />Using parallel battery banks; how to properly install them, limitations and risks when using batteries in parallel<br />How to test batteries correctly and make decisions on cell/block or string replacement<br />Battery casing choices; ABS, V0, V1, V2<br />Alternative energy storage; flywheel, re-usable cell, compressed air UPS, etc.</li></ul><h4>Advanced Electro Magnetic Fields</h4><ul><li>Sources of EMF<br />Difference between single, three phase and bus-bar EMF<br />Options available to measure EMF and how to interpret the results from single-axes and composite measurements<br />Guidance on safe distance for equipment and humans<br />Calculation of EMF attenuation factor for shielding material permeability and saturation factors</li></ul><h4>Advanced Cooling</h4><ul><li>Important definitions; dry-bulb, wet-bulb, dew-point, RH, sensible and latent heat<br />Psychometric chart and ASHRAE recommendations<br />Environmental class definitions and thermal specifications<br />Temperature/humidity measurements guideline<br />Heat dissipation methods<br />Altitude impact on temperature intake to ICT equipment<br />Floor plan setup for effective cooling<br />Differences in tile surface and supporting structure and the air-flow performance impact<br />Rack door construction and the flow performance impact<br />Equipment Delta-T and its impact<br />Optimising air flow<br />Thermal units conversions<br />Calculations for air volume displacement (CFM/CMH)<br />Cooling capacity calculations<br />Air-conditioning selection<br />De- / humidifying options<br />Air conditioning efficiency<br />SHR impact on cost saving<br />Efficiency indicator<br />New cooling principle and techniques (Submerged, VSD/VRF/ECF/water- and air side economisers)<br />Redundancy guidelines for air-conditioners avoiding classic misconceptions and mistakes for meeting ANSI/TIA-942 compliant designs<br />Installation requirements<br />Connections to fire panel and EPO<br />Commissioning of air conditioners<br />Set points and calibration<br />CFD (Computational Fluid Dynamics)</li></ul><h4>Advanced Fire Protection</h4><ul><li>The fire triangle and elements to stop a fire<br />Detection systems in detail (VESDA, VIEW, smoke sensors)<br />Considerations for installation of sensors<br />Proper testing of smoke sensors<br />Water based systems i.e. deluge, wet-pipe, dry-pipe, pre-action and why most of them don't work and how to detect this<br />Details on Inert and Halocarbon systems and how to select the correct system for your data centre<br />How to calculate the gas content ensuring the appropriate level is installed to suppress the fire including safety considerations<br />Other requirements for gas systems such as release times, hold times, pipe install requirements and other important factors<br />Requirements for the fire detection panel<br />Installation verification, methods, what to check and how<br />New advanced fire suppression technologies</li></ul><h4>Design and Install Scalable Networking Cabling System</h4><ul><li>ANSI/TIA942 cabling structure topology<br />ToR, EoR Design<br />Intelligent patching systems<br />Installation best practice such as routing, bending radius, separation from power, containment fill ratio, fiber link loss calculator, bonding and grounding requirement<br />Standard for telecommunications labeling and administration</li></ul><h4>Environmental Specifications and Contamination Control</h4><ul><li>Acoustic noise effects, regulations, specifications and limits<br />Data centre contaminations and classifications<br />Measurements, standards and limits<br />Preventive measures and avoidance</li></ul><h4>Data Centre Efficiency</h4><ul><li>Business drivers to go Green<br />High-availability or Green?<br />Green guidelines and standards<br />How to measure it and what are acceptable numbers compared to the general industry<br />PUE classes defined by Green Grid and issues with PUE<br />Techniques for saving energy in all parts of the data centre i.e. application/system level, cooling, power distribution</li></ul><h4>Mock Exam</h4><h4>EXAM: Certified Data Centre Specialist</h4></div>

Service Design Courses (SDC)

IT Certifications

Construction Design & Management (CDM)

Certificate of Business Continuity Programme (CBCI)

Certified in Data Protection (CDP)

Electrical Design

Certified Data Centre Specialist (CDCS)

<div>
							<div>
					<div>
			<div>
							<div>
						<div>
				<div>
					</div>
				</div>
				<div>
				<div>
					<div><p><span>The comprehensive Advanced Piping &amp; Instrumentation Diagrams P&amp;IDs has been designed by industry experts to provide learners with everything they need to enhance their skills and knowledge in their chosen area of study. Enrol on the Advanced Piping &amp; Instrumentation Diagrams P&amp;IDs today, and learn from the very best the industry has to offer!</span></p></div>
				</div>
				</div>
						</div>
					</div>
		</div>
								</div>
					</div><div>
							<div>
					<div>
			<div>
							<div>
						<div>
				<div>
					<div><p><span>This best selling Advanced Piping &amp; Instrumentation Diagrams P&amp;IDs has been developed by industry professionals and has already been completed by hundreds of satisfied students. This in-depth Advanced Piping &amp; Instrumentation Diagrams P&amp;IDs is suitable for anyone who wants to build their professional skill set and improve their expert knowledge.</span></p><p><span>The Advanced Piping &amp; Instrumentation Diagrams P&amp;IDs is CPD-accredited, so you can be confident you're completing a quality training course which will boost your CV and enhance your career potential. The Advanced Piping &amp; Instrumentation Diagrams P&amp;IDs is made up of several information-packed modules which break down each topic into bite-sized chunks to ensure you understand and retain everything you learn.</span></p><p><span>After successfully completing the Advanced Piping &amp; Instrumentation Diagrams P&amp;IDs, you will be awarded a certificate of completion as proof of your new skills. If you are looking to pursue a new career and want to build your professional skills to excel in your chosen field, the certificate of completion from the Advanced Piping &amp; Instrumentation Diagrams P&amp;IDs will help you stand out from the crowd. You can also validate your certification on our website.</span></p><p><span>We know that you are busy and that time is precious, so we have designed the Advanced Piping &amp; Instrumentation Diagrams P&amp;IDs to be completed at your own pace, whether that's part-time or full-time. Get full course access upon registration and access the course materials from anywhere in the world, at any time, from any internet-enabled device. </span></p><p><span>Our experienced tutors are here to support you through the entire learning process and answer any queries you may have via email.</span></p></div>
				</div>
				</div>
						</div>
					</div>
		</div>
								</div>
					</div>

Course Cloud

Chartered Institute of Personnel Development (CIPD)

Professional payroll & pensions qualifications (CIPP)

Diploma in Professional Studies (DPS)

Continuous Professional Development (CPD)

Advanced Piping & Instrumentation Diagrams P&IDs

<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
					<div>
			<div></div>
		</div>
				</div>
				</div>
				<div>
				<div>
			
				</div>
				<div>
				<div>
					<div><p>Looking to gain a thorough understanding of Piping &amp; Instrumentation Diagrams (P&amp;IDs)? Our online course is the ideal solution for both beginners and seasoned professionals. Our curriculum has been expertly crafted to cover all aspects of this intricate field.</p><p>In the first part of the course, we give a detailed introduction to P&amp;IDs, explaining their importance in various engineering and industrial processes. A key part of this segment is dedicated to familiarizing you with the numerous symbols used in P&amp;IDs. We have integrated practical exercises within the course content, allowing you to apply and practice using these symbols actively.</p><p>The course then progresses into an essential component of P&amp;IDs - process control. We take you through the fundamental elements of control theory and elucidate the structure and functioning of Basic Process Control Systems (BPCS). Gaining a comprehensive understanding of these systems will significantly improve your grasp of P&amp;IDs.</p><p>In the concluding part of the course, we concentrate on the safety systems in P&amp;IDs, primarily focusing on Safety Instrumented Systems (SIS), interlocks, and alarms. These critical safety elements are thoroughly explained with the aid of real-life P&amp;ID examples, enhancing your practical understanding.</p><p>Once you complete the Piping &amp; Instrumentation Diagrams P&amp;IDs course successfully, you'll be awarded a certificate as a testament to your newfound expertise in P&amp;IDs. Our course is a perfect blend of theoretical knowledge and practical application.</p></div>
				</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</div></section>
				<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
			<h2><b> Learning outcome</b></h2>		</div>
				</div>
				<div>
				<div>
					<ul>
							<li>
											<span>
													</span>
										<span>Gain a thorough understanding of P&amp;IDs.</span>
									</li>
								<li>
											<span>
													</span>
										<span>Learn to identify and use P&amp;ID symbols.</span>
									</li>
								<li>
											<span>
													</span>
										<span>Understand the basics and advanced concepts of process control.</span>
									</li>
								<li>
											<span>
													</span>
										<span>Grasp the workings of Safety Instrumented Systems (SIS).</span>
									</li>
								<li>
											<span>
													</span>
										<span>Be proficient in reading and creating P&amp;IDs.</span>
									</li>
						</ul>
				</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>
				<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
					</div>
				</div>
				<div>
				<div>
					
			</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>
				<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
			<h2> <b>Why should I take this course?</b></h2>		</div>
				</div>
				<div>
				<div>
					<ul>
							<li>
											<span>
													</span>
										<span>Develop a vital skill for a variety of engineering disciplines.</span>
									</li>
								<li>
											<span>
													</span>
										<span>Improve your career prospects in fields like process engineering and plant design.</span>
									</li>
								<li>
											<span>
													</span>
										<span>Understand safety systems and their importance in industry.</span>
									</li>
								<li>
											<span>
													</span>
										<span>Develop a skill that's in high demand in sectors like oil and gas, and power generation.</span>
									</li>
								<li>
											<span>
													</span>
										<span>Get a certificate to validate your learning.</span>
									</li>
						</ul>
				</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>
				<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
			<h2> <b>Career Path</b></h2>		</div>
				</div>
				<div>
				<div>
					<ul>
							<li>
											<span>
													</span>
										<span>Process Engineer</span>
									</li>
								<li>
											<span>
													</span>
										<span>Piping Engineer</span>
									</li>
								<li>
											<span>
													</span>
										<span>Plant Designer</span>
									</li>
								<li>
											<span>
													</span>
										<span>Control Systems Engineer</span>
									</li>
								<li>
											<span>
													</span>
										<span>Safety Systems Engineer</span>
									</li>
						</ul>
				</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>
				<section>
						<div>
				<div>
				<div>
			<div>
					<div>
				<div>
				<div>
			<h2> <b>Requirements</b></h2>		</div>
				</div>
				<div>
				<div>
					<ul>
							<li>
											<span>
													</span>
										<span>Basic understanding of engineering concepts.</span>
									</li>
								<li>
											<span>
													</span>
										<span>A keen interest in learning about process and instrumentation diagrams.</span>
									</li>
								<li>
											<span>
													</span>
										<span>Internet access for online learning.</span>
									</li>
						</ul>
				</div>
				</div>
						</div>
			</div>
		</div>
						</div>
			</div>
		</section>

Skill Up

Learn Piping and Instrumentation Diagrams (P&IDs) and enhance your engineering knowledge. Master P&ID symbols, control theory, and safety systems!

Piping & Instrumentation Diagrams P&IDs

<div>
							<div>
					<div>
			<div>
							<div>
						<div>
				<div>
			<h2><b>Course Overview</b></h2>		</div>
				</div>
				<div>
				<div>
					<div><p><span>Are you looking to become a Computer Programmer? Then you will need to know how to communicate your designs and ideas to other programmers, analysts and architects, in an effective way. This is where UML comes in. </span></p><p><span>The<strong> UML Class Diagrams Level 2</strong> course will teach you the skills required to read and create UML class diagrams. It will show you how to use them as a valuable communication and software tool, where you will explore its different concepts from basic to advanced. By the end of this course, you will be able to design object-oriented classes in UML, write code based on UML class diagrams, and much more. You will also have an excellent understanding of the different elements of UML class diagrams.</span></p><p><span>This course has no particular entry requirements, however, a basic understanding of object-oriented programming concepts is ideal. </span></p></div>
				</div>
				</div>
				<div>
				<div>
					<div><p><span>This best selling </span><b><span><b>UML Class Diagrams Level 2</b> </span></b><span>has been developed by industry professionals and has already been completed by hundreds of satisfied students. This in-depth </span><b><span><b>UML Class Diagrams Level 2</b> </span></b><span>is suitable for anyone who wants to build their professional skill set and improve their expert knowledge.</span></p><p><span><span>The </span><b>UML Class Diagrams Level 2</b> is CPD-accredited, so you can be confident you're completing a quality training course will boost your CV and enhance your career potential. The </span><b><span><b>UML Class Diagrams Level 2</b> </span></b><span>is made up of several information-packed modules which break down each topic into bite-sized chunks to ensure you understand and retain everything you learn.</span></p><p><span><span>After successfully completing the</span><b> UML Class Diagrams Level 2</b>, you will be awarded a certificate of completion  as proof of your new skills. If you are looking to pursue a new career and want to build your professional skills to excel in your chosen field, the certificate of completion from the </span><span><b>UML Class Diagrams Level 2</b></span> will help you stand out from the crowd. You can also validate your certification on our website.</p><p><span><span>We know that you are busy and that time is precious, so we have designed the </span><b>UML Class Diagrams Level 2 </b>to be completed at your own pace, whether that's part-time or full-time. Get full course access upon registration and access the course materials from anywhere in the world, at any time, from any internet-enabled device. </span></p><p><span><span>Our experienced tutors are here to support you through the entire learning process and answer any queries you may have via email.</span></span></p></div>
				</div>
				</div>
						</div>
					</div>
		</div>
								</div>
					</div><div>
							<div>
					<div>
			<div>
							<div>
						<div>
				<div>
					</div>
				</div>
				<section>
						<div>
							<div>
					<div>
			<div>
							<div>
						<div>
				<div>
					<div>
											
															
											</div>
				</div>
				</div>
						</div>
					</div>
		</div>
				<div>
			<div>
							<div>
						<div>
				<div>
					<div>
											
															
											</div>
				</div>
				</div>
						</div>
					</div>
		</div>
				<div>
			<div>
							<div>
						<div>
				<div>
					<div>
											
															
											</div>
				</div>
				</div>
						</div>
					</div>
		</div>
				<div>
			<div>
							<div>
						<div>
				<div>
					<div>
											
															
											</div>
				</div>
				</div>
						</div>
					</div>
		</div>
								</div>
					</div>
		</section>
						</div>
					</div>
		</div>
								</div>
					</div>

UML Class Diagrams Level 2

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>The Certified Ethical Hacking v12 course will significantly benefit security officers, auditors, security professionals, site administrators, and anyone who is concerned about the integrity of the network infrastructure.</p>Overview<p>Information security controls, laws, and standards. Various types of footprinting, footprinting tools, and countermeasures. Network scanning techniques and scanning countermeasures Enumeration techniques and enumeration countermeasures Vulnerability analysis to identify security loopholes in the target organization?s network, communication infrastructure, and end systems. System hacking methodology, steganography, steganalysis attacks, and covering tracks to discover system and network vulnerabilities. Different types of malware (Trojan, Virus, worms, etc.), system auditing for malware attacks, malware analysis, and countermeasures. Packet sniffing techniques to discover network vulnerabilities and countermeasures to defend against sniffing. Social engineering techniques and how to identify theft attacks to audit human-level vulnerabilities and social engineering countermeasures. DoS/DDoS attack techniques and tools to audit a target and DoS/DDoS countermeasures. Session hijacking techniques to discover network-level session management, authentication/authorization, and cryptographic weaknesses and countermeasures. Webserver attacks and a comprehensive attack methodology to audit vulnerabilities in webserver infrastructure, and countermeasures. Web application attacks, comprehensive web application hacking methodology to audit vulnerabilities in web applications, and countermeasures. SQL injection attack techniques, injection detection tools to detect SQL injection attempts, and countermeasures. Wireless encryption, wireless hacking methodology, wireless hacking tools, and Wi-Fi security tools. Mobile platform attack vector, android vulnerability exploitations, and mobile security guidelines and tools. Firewall, IDS and honeypot evasion techniques, evasion tools and techniques to audit a network perimeter for weaknesses, and countermeasures. Cloud computing concepts (Container technology, serverless computing), the working of various threats and attacks, and security techniques and tools. Penetration testing, security audit, vulnerability assessment, and penetration testing roadmap. Threats to IoT and OT platforms and defending IoT and OT devices. Cryptography ciphers, Public Key Infrastructure (PKI), cryptography attacks, and cryptanalysis tools.</p><p>CEH provides an in-depth understanding of ethical hacking phases, various attack vectors, and preventative countermeasures. It will teach you how hackers think and act maliciously so you will be better positioned to setup your security infrastructure and defend against future attacks. An understanding of system weaknesses and vulnerabilities helps organizations strengthen their system security controls to minimize the risk of an incident. CEH was built to incorporate a hands-on environment and systematic process across each ethical hacking domain and methodology, giving you the opportunity to work towards proving the required knowledge and skills needed to achieve the CEH credential. You will be exposed to an entirely different posture toward the responsibilities and measures required to be secure. Now in its 12th version, CEH continues to evolve with the latest operating systems, tools, tactics, exploits, and technologies.</p></div><div id="course-pills-2"><h3>1 - Introduction to Ethical Hacking</h3> <ul> <li>Information Security Overview</li> <li>Cyber Kill Chain Concepts</li> <li>Hacking Concepts</li> <li>Ethical Hacking Concepts</li> <li>Information Security Controls</li> <li>Information Security Laws and Standards</li> </ul> <h3>2 - 2 - Foot-printing and Reconnaissance</h3> <ul> <li>Footprinting Concepts</li> <li>Footprinting through Search Engines</li> <li>Footprinting through Web Services</li> <li>Footprinting through Social Networking Sites</li> <li>Website Footprinting</li> <li>Email Footprinting</li> <li>Who is Footprinting</li> <li>DNS Footprinting</li> <li>Network Footprinting</li> <li>Footprinting through Social Engineering</li> <li>Footprinting Tools</li> <li>Footprinting Countermeasures</li> </ul> <h3>3 - Scanning Networks</h3> <ul> <li>Network Scanning Concepts</li> <li>Scanning Tools</li> <li>Host Discovery</li> <li>Port and Service Discovery</li> <li>OS Discovery (Banner Grabbing/OS Fingerprinting) </li><li>Scanning Beyond IDS and Firewall</li> <li>Draw Network Diagrams</li> </ul> <h3>4 - Enumeration</h3> <ul> <li>Enumeration Concepts</li> <li>NetBIOS Enumeration</li> <li>SNMP Enumeration</li> <li>LDAP Enumeration</li> <li>NTP and NFS Enumeration</li> <li>SMTP and DNS Enumeration</li> <li>Other Enumeration Techniques</li> <li>Enumeration Countermeasures</li> </ul> <h3>5 - Vulnerability Analysis</h3> <ul> <li>Vulnerability Assessment Concepts</li> <li>Vulnerability Classification and Assessment Types</li> <li>Vulnerability Assessment Solutions and Tools</li> <li>Vulnerability Assessment Reports</li> </ul> <h3>6 - System Hacking</h3> <ul> <li>System Hacking Concepts</li> <li>Gaining Access</li> <li>Escalating Privileges</li> <li>Maintaining Access</li> <li>Clearing Logs</li> </ul> <h3>7 - Malware Threats</h3> <ul> <li>Malware Concepts</li> <li>APT Concepts</li> <li>Trojan Concepts</li> <li>Virus and Worm Concepts</li> <li>Fileless Malware Concepts</li> <li>Malware Analysis</li> <li>Countermeasures</li> <li>Anti-Malware Software</li> </ul> <h3>8 - Sniffing</h3> <ul> <li>Sniffing Concepts</li> <li>Sniffing Technique: MAC Attacks</li> <li>Sniffing Technique: DHCP Attacks</li> <li>Sniffing Technique: ARP Poisoning</li> <li>Sniffing Technique: Spoofing Attacks</li> <li>Sniffing Technique: DNS Poisoning</li> <li>Sniffing Tools</li> <li>Countermeasures</li> <li>Sniffing Detection Techniques</li> </ul> <h3>9 - Social Engineering</h3> <ul> <li>Social Engineering Concepts</li> <li>Social Engineering Techniques</li> <li>Insider Threats</li> <li>Impersonation on Social Networking Sites</li> <li>Identity Theft</li> <li>Countermeasures</li> </ul> <h3>10 - Denial-of-Service</h3> <ul> <li>DoS/DDoS Concepts</li> <li>DoS/DDoS Attack Techniques</li> <li>BotnetsDDoS Case Study</li> <li>DoS/DDoS Attack Tools</li> <li>Countermeasures</li> <li>DoS/DDoS Protection Tools</li> </ul> <h3>11 - Session Hijacking</h3> <ul> <li>Session Hijacking Concepts</li> <li>Application Level Session Hijacking</li> <li>Network Level Session Hijacking</li> <li>Session Hijacking Tools</li> <li>Countermeasures</li> </ul> <h3>12 - Evading IDS, Firewalls, and Honeypots</h3> <ul> <li>IDS, IPS, Firewall, and Honeypot Concepts</li> <li>IDS, IPS, Firewall, and Honeypot Solutions</li> <li>Evading IDS</li> <li>Evading Firewalls</li> <li>IDS/Firewall Evading Tools</li> <li>Detecting Honeypots</li> <li>IDS/Firewall Evasion Countermeasures</li> </ul> <h3>13 - Hacking Web Servers</h3> <ul> <li>Web Server Concepts</li> <li>Web Server Attacks</li> <li>Web Server Attack Methodology</li> <li>Web Server Attack Tools</li> <li>Countermeasures</li> <li>Patch Management</li> <li>Web Server Security Tools</li> </ul> <h3>14 - Hacking Web Applications</h3> <ul> <li>Web Application Concepts</li> <li>Web Application Threats</li> <li>Web Application Hacking Methodology</li> <li>Web API, Webhooks, and Web Shell</li> <li>Web Application Security</li> </ul> <h3>15 - SQL Injection</h3> <ul> <li>SQL Injection Concepts</li> <li>Types of SQL Injection</li> <li>SQL Injection Methodology</li> <li>SQL Injection Tools</li> <li>Evasion Techniques</li> <li>Countermeasures</li> </ul> <h3>16 - Hacking Wireless Networks</h3> <ul> <li>Wireless Concepts</li> <li>Wireless Encryption</li> <li>Wireless Threats</li> <li>Wireless Hacking Methodology</li> <li>Wireless Hacking Tools</li> <li>Bluetooth Hacking</li> <li>Countermeasures</li> <li>Wireless Security Tools</li> </ul> <h3>17 - Hacking Mobile Platforms</h3> <ul> <li>Mobile Platform Attack Vectors</li> <li>Hacking Android OS</li> <li>Hacking iOS</li> <li>Mobile Device Management</li> <li>Mobile Security Guidelines and Tools</li> </ul> <h3>18 - IoT and OT Hacking</h3> <ul> <li>IoT Hacking</li> <li>IoT Concepts</li> <li>IoT Attacks</li> <li>IoT Hacking Methodology</li> <li>IoT Hacking Tools</li> <li>Countermeasures</li> <li>OT Hacking</li> <li>OT Concepts</li> <li>OT Attacks</li> <li>OT Hacking Methodology</li> <li>OT Hacking Tools</li> <li>Countermeasures</li> </ul> <h3>19 - Cloud Computing</h3> <ul> <li>Cloud Computing Concepts</li> <li>Container Technology</li> <li>Serverless Computing</li> <li>Cloud Computing Threats</li> <li>Cloud Hacking</li> <li>Cloud Security</li> </ul> <h3>20 - Cryptography</h3> <ul> <li>Cryptography Concepts</li> <li>Encryption Algorithms</li> <li>Cryptography Tools</li> <li>Public Key Infrastructure (PKI) </li><li>Email Encryption</li> <li>Disk Encryption</li> <li>Cryptanalysis</li> <li>Countermeasures</li> </ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans EC-Council Certified Ethical Hacker (CEH) v.12 training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the EC-Council Certified Ethical Hacker (CEH) v.12 course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Certified in Cybersecurity (CC)

Cyber Security

Certified Ethical Hacker (CEH)

Certified Cyber Professional (CCP)

Ethical Hacking

EC-Council Certified Ethical Hacker (CEH) v12

<div>
						<div>
							<div>
							<section>
						<div>
							<div>
					<div>
			<div>
							<div>
						<div>
				<div>
			<h2>Overview
</h2>		</div>
				</div>
				<div>
				<div>
								<div>
					<p>This comprehensive course on <strong>Understand Piping &amp; Instrumentation Diagrams P&amp;IDs</strong> will deepen your understanding on this topic. After successful completion of this course you can acquire the required skills in this sector. This <strong>Understand Piping &amp; Instrumentation Diagrams P&amp;IDs</strong> comes with accredited certification from CPD, which will enhance your CV and make you worthy in the job market. So enrol in this course today to fast track your career ladder.</p>					</div>
						</div>
				</div>
						</div>
					</div>
		</div>
								</div>
					</div>
		</section>
				<section>
						<div>
							<div>
					<div>
			<div>
							<div>
								</div>
					</div>
		</div>
								</div>
					</div>
		</section>
				<section>
						<div>
							<div>
					<div>
			<div>
							<div>
						<div>
				<div>
			<h2>How will I get my certificate?</h2>		</div>
				</div>
				<div>
				<div>
								<div>
					<p><span>At the end of the course there will be an online written test, which you can take either during or after the course. After successfully completing the test you will be able to order your certificate, these are included in the price.</span></p>					</div>
						</div>
				</div>
				<div>
				<div>
			<h2>Who is This course for?</h2>		</div>
				</div>
				<div>
				<div>
								<div>
					<p>There is no experience or previous qualifications required for enrolment on this <strong>Understand Piping &amp; Instrumentation Diagrams P&amp;IDs</strong>. It is available to all students, of all academic backgrounds.</p>					</div>
						</div>
				</div>
				<div>
				<div>
			<h2>Requirements</h2>		</div>
				</div>
				<div>
				<div>
								<div>
					<p>Our <strong>Understand Piping &amp; Instrumentation Diagrams P&amp;IDs</strong> is fully compatible with PC's, Mac's, Laptop, Tablet and Smartphone devices. This course has been designed to be fully compatible with tablets and smartphones so you can access your course on Wi-Fi, 3G or 4G.</p><p>There is no time limit for completing this course, it can be studied in your own time at your own pace.</p>					</div>
						</div>
				</div>
				<div>
				<div>
			<h2>Career Path</h2>		</div>
				</div>
				<div>
				<div>
								<div>
					<p><span>Having these various qualifications will increase the value in your CV and open you up to multiple sectors such as Business &amp; Management, Admin, Accountancy &amp; Finance, Secretarial &amp; PA, Teaching &amp; Mentoring etc.</span></p>					</div>
						</div>
				</div>
						</div>
					</div>
		</div>
								</div>
					</div>
		</section>
						</div>
						</div>
					</div> <h3>Course Curriculum</h3><div><p>14 sections • 119 lectures • 08:26:00 total length</p></div><div><div><div><div><div><div><div><p>•Introduction: 00:04:00</p></div></div></div></div></div><div><div><div><div><div><div><p>•What's a P&amp;ID ?: 00:03:00</p></div><div><div><p>•Why is a P&amp;ID so important ?: 00:02:00</p></div><div><div><p>•Who uses P&amp;ID's ?: 00:06:00</p></div><div><div><p>•How do P&amp;ID's look like ?: 00:08:00</p></div></div></div></div></div><div><div><div><div><div><div><p>•Introduction- PID READING: 00:02:00</p></div><div><div><p>•Anatomy of a P&amp;ID: 00:01:00</p></div><div><div><p>•The title block: 00:03:00</p></div><div><div><p>•The drawing scale: 00:03:00</p></div><div><div><p>•The grid system: 00:02:00</p></div><div><div><p>•The revision block: 00:03:00</p></div><div><div><p>•Changes: 00:02:00</p></div><div><div><p>•Notes and legends: 00:03:00</p></div></div></div></div></div><div><div><div><div><div><div><p>•Valve symbols: 00:14:00</p></div><div><div><p>•Valve actuator symbols: 00:09:00</p></div><div><div><p>•Control valve designations: 00:02:00</p></div><div><div><p>•Standards and conventions for valve status: 00:07:00</p></div><div><div><p>•Process equipment symbols: 00:12:00</p></div><div><div><p>•Piping symbols: 00:03:00</p></div><div><div><p>•Pipe fitting symbols: 00:03:00</p></div><div><div><p>•Isolating, venting &amp; draining symbols for ease of maintenance: 00:05:00</p></div><div><div><p>•Instrumentation: 00:03:00</p></div><div><div><p>•Sensing devices and detectors: 00:04:00</p></div><div><div><p>•Location symbols: 00:04:00</p></div><div><div><p>•Modifiers and transmitters: 00:05:00</p></div><div><div><p>•Indicators and recorders: 00:03:00</p></div><div><div><p>•Controllers: 00:03:00</p></div></div></div></div></div><div><div><div><div><div><div><p>•Example #1 : Identifying process equipment and flow paths: 00:05:00</p></div><div><div><p>•Example #2 : Identifying valve position and failure mode: 00:03:00</p></div><div><div><p>•Example #3 : Identifying the symbols: 00:02:00</p></div></div></div></div></div><div><div><div><div><div><div><p>•Piping designation code: 00:06:00</p></div><div><div><p>•Equipment designation code: 00:03:00</p></div><div><div><p>•Instrument designation code: 00:02:00</p></div><div><div><p>•Miscellaneous designation codes: 00:02:00</p></div></div></div></div></div><div><div><div><div><div><div><p>•The process: 00:01:00</p></div><div><div><p>•Process control: 00:06:00</p></div></div></div></div></div><div><div><div><div><div><div><p>•The control loop: 00:02:00</p></div><div><div><p>•Process control terms: 00:10:00</p></div></div></div></div></div><div><div><div><div><div><div><p>•Control loops : Feedback control: 00:02:00</p></div><div><div><p>•Pressure control loops: 00:01:00</p></div><div><div><p>•Flow control loops: 00:01:00</p></div><div><div><p>•Level control loops: 00:01:00</p></div><div><div><p>•Temperature control loops: 00:01:00</p></div><div><div><p>•Multi-variable loops: 00:02:00</p></div><div><div><p>•Feedforward control: 00:02:00</p></div><div><div><p>•Feedforward + Feedback: 00:01:00</p></div><div><div><p>•Cascade control: 00:08:00</p></div><div><div><p>•Split range control: 00:03:00</p></div><div><div><p>•Operations on control signals: 00:02:00</p></div><div><div><p>•Ratio control: 00:02:00</p></div><div><div><p>•Batch control: 00:01:00</p></div><div><div><p>•Selective control: 00:01:00</p></div></div></div></div></div><div><div><div><div><div><div><p>•Do we need to control at all ?: 00:01:00</p></div><div><div><p>•Principles of equipment-wise control: 00:10:00</p></div><div><div><p>•Pipe control system: 00:02:00</p></div><div><div><p>•Control of a single pipe: 00:02:00</p></div><div><div><p>•Control of pressure in a pipe: 00:03:00</p></div><div><div><p>•Control of flow in a pipe: 00:04:00</p></div><div><div><p>•Flow merging: 00:08:00</p></div><div><div><p>•Flow splitting: 00:05:00</p></div><div><div><p>•Centrifugal pump control: 00:04:00</p></div><div><div><p>•Control valve vs Variable Frequency Drive (VFD) for centrifugal pumps: 00:03:00</p></div><div><div><p>•Minimum flow control for centrifugal pumps: 00:09:00</p></div><div><div><p>•Positive displacement pump control: 00:02:00</p></div><div><div><p>•Control by a recirculation pipe for PD pumps: 00:03:00</p></div><div><div><p>•Variable Speed Drive (VSD) control for PD pumps: 00:01:00</p></div><div><div><p>•Control by stroke adjustment for PD pumps: 00:01:00</p></div><div><div><p>•Compressor control system: 00:02:00</p></div><div><div><p>•Compressor capacity control: 00:12:00</p></div><div><div><p>•Compressor anti-surge control: 00:03:00</p></div><div><div><p>•Heat transfer equipment control: 00:02:00</p></div><div><div><p>•Heat exchanger direct control system: 00:04:00</p></div><div><div><p>•Heat exchanger bypass control system: 00:04:00</p></div><div><div><p>•Reactor temperature control: 00:06:00</p></div><div><div><p>•Air cooler control: 00:02:00</p></div><div><div><p>•Heat exchanger for heat recovery: 00:01:00</p></div><div><div><p>•Heat exchanger back pressure control: 00:02:00</p></div><div><div><p>•Basic fired heater control: 00:08:00</p></div><div><div><p>•Complex fired heater control: 00:05:00</p></div><div><div><p>•Container and vessel control: 00:07:00</p></div><div><div><p>•Container blanket gas control: 00:02:00</p></div></div></div></div></div><div><div><div><div><div><div><p>•Safety strategies: 00:01:00</p></div><div><div><p>•Concept of Safety Instrumented Systems (SIS): 00:01:00</p></div><div><div><p>•SIS actions and types: 00:14:00</p></div><div><div><p>•SIS extent: 00:02:00</p></div><div><div><p>•SIS requirement: 00:03:00</p></div><div><div><p>•Anatomy of a SIS: 00:02:00</p></div><div><div><p>•SIS element symbols: 00:01:00</p></div><div><div><p>•SIS primary elements : Sensors: 00:03:00</p></div><div><div><p>•SIS final elements: 00:04:00</p></div><div><div><p>•Switching valve actuator arrangements: 00:02:00</p></div><div><div><p>•Valve position validation: 00:02:00</p></div><div><div><p>•Merging a switching valve and a control valve: 00:03:00</p></div><div><div><p>•SIS logics: 00:01:00</p></div><div><div><p>•Showing safety instrumented functions on P&amp;ID's: 00:07:00</p></div><div><div><p>•Discrete control: 00:05:00</p></div><div><div><p>•Alarm system: 00:02:00</p></div><div><div><p>•Anatomy of alarm systems: 00:02:00</p></div><div><div><p>•Alarm requirements: 00:06:00</p></div><div><div><p>•Alarm system symbology in P&amp;ID's: 00:06:00</p></div><div><div><p>•Concept of common alarms: 00:01:00</p></div><div><div><p>•Fire and Gas Detection Systems (FGS): 00:03:00</p></div><div><div><p>•Electric motor control: 00:07:00</p></div><div><div><p>•P&amp;ID representation of commands and responses: 00:05:00</p></div><div><div><p>•P&amp;ID representation of inspection and repair: 00:05:00</p></div><div><div><p>•P&amp;ID example of electro-motor control: 00:04:00</p></div></div></div></div></div><div><div><div><div><div><div><p>•P&amp;ID example #1 : Legend and specifications: 00:05:00</p></div><div><div><p>•P&amp;ID example #2 : Hydrogen delivery station: 00:16:00</p></div><div><div><p>•P&amp;ID example #3 : Acid system: 00:13:00</p></div><div><div><p>•P&amp;ID example #4 : Centrifugal pump: 00:09:00</p></div><div><div><p>•P&amp;ID example #5 : Utility station: 00:04:00</p></div><div><div><p>•P&amp;ID example #6 : Waste water filter: 00:08:00</p></div><div><div><p>•P&amp;ID example #7 : Steam separator: 00:15:00</p></div><div><div><p>•P&amp;ID example #8 : Flare knock-out drum: 00:14:00</p></div><div><div><p>•P&amp;ID example #9 : Centrifugal compressor: 00:05:00</p></div><div><div><p>•P&amp;ID example #10 : Hydrogen production from shale gas: 00:11:00</p></div><div><div><p>•P&amp;ID example #11 : Fired heater: 00:07:00</p></div></div></div></div></div><div><div><div><div><div><div><p>•Resources - Understand Piping &amp; Instrumentation Diagrams P&amp;IDs: 00:00:00</p></div></div></div></div></div><div><div><div><div><div><div><p>•Assignment - Understand Piping &amp; Instrumentation Diagrams P&amp;IDs: 00:00:00</p></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div>

Apex Learning

Piping

Understand Piping & Instrumentation Diagrams P&IDs

Horsham

<div data-section-id="1695385309833" style="color: rgb(89, 89, 89); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(89, 89, 89);"><section data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" style="color: rgb(255, 255, 255); box-sizing: border-box;" fr-original-style=" color: rgb(255, 255, 255);"><div data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-aos="fade-up" data-aos-delay="0" data-aos-duration="1500" fr-original-style="" style="box-sizing: border-box;"><div data-section-id="1695129103966" style="color: rgb(89, 89, 89); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(89, 89, 89);"><section data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" style="color: rgb(255, 255, 255); box-sizing: border-box;" fr-original-style=" color: rgb(255, 255, 255);"><div data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-aos="fade-up" data-aos-delay="0" data-aos-duration="1500" fr-original-style="" style="box-sizing: border-box;"><div data-section-id="1695129424983" style="color: rgb(89, 89, 89); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(89, 89, 89);"><section data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" style="color: rgb(255, 255, 255); box-sizing: border-box;" fr-original-style=" color: rgb(255, 255, 255);"><div data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-aos="fade-up" data-aos-delay="0" data-aos-duration="1500" fr-original-style="" style="box-sizing: border-box;"><div data-section-id="1695129508013" style="color: rgb(89, 89, 89); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(89, 89, 89);"><section data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" style="color: rgb(255, 255, 255); box-sizing: border-box;" fr-original-style=" color: rgb(255, 255, 255);"><div data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-aos="fade-up" data-aos-delay="0" data-aos-duration="1500" fr-original-style="" style="box-sizing: border-box;"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Ensure you can fully utilize this powerful tool to create a range of flowcharts and diagrams.</p></div></div></section></div></div></div></section></div></div></div></section></div></div></div></section></div><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><div data-section-id="1695042071629" style="color: rgb(89, 89, 89); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);"><section data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-aos="fade-up" data-aos-delay="500" data-aos-duration="1500" fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><div data-aos="fade-up" data-aos-delay="500" data-aos-duration="1500" fr-original-style="" style="box-sizing: border-box;"><img src="https://kajabi-storefronts-production.kajabi-cdn.com/kajabi-storefronts-production/file-uploads/themes/2153291274/settings_images/77df68e-28e4-057f-41d6-ca1d3577146_Course_Overview_Icon.png" alt="" style="width: 80px; cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 80px;" fr-original-class="fr-draggable"></div></div><h3 style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">Course overview</h3><p style="color: rgb(89, 89, 89); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(89, 89, 89);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Duration:&nbsp;</strong>1 day (6.5 hours)&nbsp;</p><p style="color: rgb(89, 89, 89); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);">Microsoft Visio is a powerful tool designed to simplify complex information through the creation of simple, professional-looking diagrams.</p><p style="color: rgb(89, 89, 89); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);">While Visio is capable of producing almost any type of drawing this training concentrates on flowcharts, swim lane process diagrams and organisation charts. You will also discover the real power of Visio by adding essential data to the content of your diagrams and producing reports in Excel using this data.</p><p style="color: rgb(89, 89, 89); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);">This course is designed for either new users of Visio or those who have dabbled and can create basic diagrams. Our course will give you the skills and knowledge you need to navigate your way around this powerful program and produce different types of diagram.</p><div data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div></section></div><div data-section-id="1695042071630" style="color: rgb(89, 89, 89); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);"><section data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-aos="fade-up" data-aos-delay="0" data-aos-duration="1500" fr-original-style="" style="box-sizing: border-box;"><img src="https://kajabi-storefronts-production.kajabi-cdn.com/kajabi-storefronts-production/file-uploads/themes/2153291274/settings_images/8ba0826-4fb5-333c-0ea4-28c13064336b_Objectives_Icon.png" alt="" style="width: 80px; cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 80px;" fr-original-class="fr-draggable"><br fr-original-style="" style="box-sizing: border-box;"></div></div><div data-section-id="1694266245578" style="color: rgb(89, 89, 89); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(89, 89, 89);"><section data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-aos="fade-up" data-aos-delay="0" data-aos-duration="1500" fr-original-style="" style="box-sizing: border-box;"><h3 style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">Objectives&nbsp;</h3><div data-section-id="1695129553631" style="color: rgb(89, 89, 89); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(89, 89, 89);"><section data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-aos="fade-up" data-aos-delay="0" data-aos-duration="1500" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">By the end of the course you will be able to:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Create and amend flowcharts</li><li fr-original-style="" style="box-sizing: border-box;">Create cross functional (Swim Lane) process flows</li><li fr-original-style="" style="box-sizing: border-box;">Produce organisation charts by importing data</li><li fr-original-style="" style="box-sizing: border-box;">Add essential data to shapes</li><li fr-original-style="" style="box-sizing: border-box;">Export diagram data reports to Excel</li><li fr-original-style="" style="box-sizing: border-box;">Present, publish and print Visio diagrams</li></ul></div></div></section></div></div></div></section></div><div data-section-id="1694266514989" style="color: rgb(89, 89, 89); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);"><br fr-original-style="" style="box-sizing: border-box;"></div><div fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><p style="color: rgb(89, 89, 89); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);"><img src="https://kajabi-storefronts-production.kajabi-cdn.com/kajabi-storefronts-production/file-uploads/themes/2153291274/settings_images/cbd24e-e374-8bf2-2a2e-66ae236e51d4_Content_Icon.png" alt="" style="width: 80px; cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 80px;" fr-original-class="fr-draggable"></p></section></div><div data-section-id="1695042071631" style="color: rgb(89, 89, 89); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);"><section data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-section-id="1695048787156" style="color: rgb(89, 89, 89); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(89, 89, 89);"><section data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-aos="fade-up" data-aos-delay="0" data-aos-duration="1500" fr-original-style="" style="box-sizing: border-box;"><h3 style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">Content</h3></div><div data-section-id="1695129424986" style="color: rgb(89, 89, 89); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(89, 89, 89);"><section data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><div data-reveal-event="" data-reveal-offset="" data-reveal-units="seconds" fr-original-style="" style="box-sizing: border-box;"><h5 style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">Visio essentials</h5><ul style="color: rgb(89, 89, 89); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);"><li fr-original-style="" style="box-sizing: border-box;">Finding your way around Visio</li><li fr-original-style="" style="box-sizing: border-box;">Using the ribbon and Quick Access toolbar</li><li fr-original-style="" style="box-sizing: border-box;">Keyboard shortcuts</li><li fr-original-style="" style="box-sizing: border-box;">Shapes and stencils explained</li><li fr-original-style="" style="box-sizing: border-box;">What Visio can do for you</li></ul><h5 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Creating basic flowcharts</h5><ul style="color: rgb(89, 89, 89); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);"><li fr-original-style="" style="box-sizing: border-box;">Working with shapes</li><li fr-original-style="" style="box-sizing: border-box;">Adding and deleting shapes</li><li fr-original-style="" style="box-sizing: border-box;">Joining, aligning and sizing shapes</li><li fr-original-style="" style="box-sizing: border-box;">Using Auto-Connect</li><li fr-original-style="" style="box-sizing: border-box;">Labelling shapes and connectors</li></ul><h5 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Editing and improvinC flowcharts&nbsp;</h5><ul style="color: rgb(89, 89, 89); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);"><li fr-original-style="" style="box-sizing: border-box;">Amending shape and connector labels</li><li fr-original-style="" style="box-sizing: border-box;">Using colours to emphasise</li><li fr-original-style="" style="box-sizing: border-box;">Changing line styles</li><li fr-original-style="" style="box-sizing: border-box;">Moving and copying objects</li><li fr-original-style="" style="box-sizing: border-box;">Grouping diagram elements</li><li fr-original-style="" style="box-sizing: border-box;">Quick ways of working</li></ul><h5 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Cross functional flowcharts</h5><ul style="color: rgb(89, 89, 89); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);"><li fr-original-style="" style="box-sizing: border-box;">Creating Cross-Functional Flowcharts</li><li fr-original-style="" style="box-sizing: border-box;">Manipulating functional bands</li><li fr-original-style="" style="box-sizing: border-box;">Creating off-page references within diagrams and hyperlinks to other documentation</li></ul><h5 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Organising charts and shape data</h5><ul style="color: rgb(89, 89, 89); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);"><li fr-original-style="" style="box-sizing: border-box;">Using the wizard to create an organisation Chart</li><li fr-original-style="" style="box-sizing: border-box;">Importing existing Data into to create an organisation chart</li><li fr-original-style="" style="box-sizing: border-box;">Modifying an organisation chart</li><li fr-original-style="" style="box-sizing: border-box;">Shape Data</li><li fr-original-style="" style="box-sizing: border-box;">Adding shape data to a shape</li><li fr-original-style="" style="box-sizing: border-box;">Creating shape data sets</li></ul><h5 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Diagram reports</h5><ul style="color: rgb(89, 89, 89); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);"><li fr-original-style="" style="box-sizing: border-box;">Exporting data to a report in Excel</li><li fr-original-style="" style="box-sizing: border-box;">Exporting to HTML</li><li fr-original-style="" style="box-sizing: border-box;">Creating and customizing reports</li></ul><h5 style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">Presenting, publishing and printing</h5><ul style="color: rgb(89, 89, 89); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);"><li fr-original-style="" style="box-sizing: border-box;">Using Page Setup</li><li fr-original-style="" style="box-sizing: border-box;">Print previewing</li><li fr-original-style="" style="box-sizing: border-box;">Embedding backgrounds</li><li fr-original-style="" style="box-sizing: border-box;">Adding headers and footers</li><li fr-original-style="" style="box-sizing: border-box;">Converting your final documentation to PDF</li><li fr-original-style="" style="box-sizing: border-box;">Saving as HTML</li><li fr-original-style="" style="box-sizing: border-box;">Visio with PowerPoint</li></ul></div></section></div></div></section></div><div data-section-id="1695048787157" style="color: rgb(89, 89, 89); box-sizing: border-box;" fr-original-style=" color: rgb(89, 89, 89);"><br fr-original-style="" style="box-sizing: border-box;"></div></div></section></div>

Underscore Group

Visio Flowcharts and Diagrams

23 Courses in Bristol

Geomechanics

By EnergyEdge - Training for a Sustainable Energy Future

PRINCE2 Practitioner: In-House Training

By IIL Europe Ltd

Tripod Beta Practitioner - Bronze Level

By EnergyEdge - Training for a Sustainable Energy Future

Decision Making for Managers

By Mpi Learning - Professional Learning And Development Provider

Microsoft Powerpoint Advanced - In-company (now with live online classes)

By Microsoft Office Training

Word - introduction (In-House)

By The In House Training Company

PowerPoint - intermediate (In-House)

By The In House Training Company

PowerPoint - introduction (In-House)

By The In House Training Company

Power BI - dashboards (1 day) (In-House)

By The In House Training Company

Project planning and control (In-House)

By The In House Training Company

Search By Location