Name: Transmission Lines: Design, Analysis and Applications
Price: 3320 GBP
Availability: InStock

Heckmondwike

<ol type="1" start="1" style="color: rgb(66, 66, 66); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(66, 66, 66);"><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Assessment and Planning:</span></strong><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;"></span></li><ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Survey the area where you want to install CCTV cameras. Identify key areas that need surveillance such as entry points, blind spots, and valuable assets.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Determine the number of cameras needed and their types (e.g., dome, bullet, PTZ) based on the coverage required and environmental conditions.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Plan the placement of cameras considering factors like lighting conditions, obstructions, and the angle of view required.</span></li></ul><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Selecting Equipment:</span></strong><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;"></span></li><ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Choose high-quality CCTV cameras and other necessary equipment such as DVRs (Digital Video Recorders) or NVRs (Network Video Recorders), cables, connectors, power supplies, and storage devices.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Ensure compatibility between cameras and recording devices. Consider features like resolution, night vision capability, and weather resistance.</span></li></ul><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Mounting Cameras:</span></strong><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;"></span></li><ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Install cameras at the planned locations using appropriate mounting brackets or housings.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Ensure cameras are securely fixed to prevent tampering or theft.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Adjust the angle and direction of each camera to cover the desired area effectively.</span></li></ul><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Running Cables:</span></strong><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;"></span></li><ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Plan the route for cables connecting cameras to the recording device.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Use weatherproof cables suitable for outdoor installation.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Conceal cables where possible to prevent tampering and maintain aesthetics.</span></li></ul><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Connecting Components:</span></strong><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;"></span></li><ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Connect cameras to the DVR/NVR using appropriate cables and connectors.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Ensure proper power supply to cameras and recording devices.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Configure network settings if using an IP-based CCTV system for remote viewing.</span></li></ul><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Configuring Settings:</span></strong><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;"></span></li><ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Access the DVR/NVR interface and configure settings such as recording schedule, motion detection, and video quality.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Set up user accounts and passwords to restrict access to the system.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Test the system to ensure cameras are capturing footage and recording properly.</span></li></ul><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Remote Viewing (Optional):</span></strong><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;"></span></li><ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Set up remote viewing capabilities to access live or recorded footage from smartphones, tablets, or computers.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Configure port forwarding on your router if accessing the system from outside the local network.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Install and configure the necessary software or mobile apps provided by the CCTV system manufacturer.</span></li></ul><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Testing and Maintenance:</span></strong><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;"></span></li><ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Test the system thoroughly to ensure all cameras are functioning correctly and recording as expected.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Regularly check and clean cameras to maintain optimal performance.</span></li><li style="color: rgb(13, 13, 13) !important; box-sizing: border-box;" fr-original-style="color: rgb(13, 13, 13) !important;"><span style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">Update firmware and software periodically to patch security vulnerabilities and access new features.</span></li></ul></ol><p style="color: rgb(66, 66, 66); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="color: rgb(66, 66, 66);">&nbsp;</p>

Videcon Training 

CCTV

Concept Pro - Complete CCTV Solutions (Head Office) 

General Admission

Redhill

<h3><b>Copper cabling systems training course description</b></h3>
        <p>A hands on training course covering installation,
termination and testing of copper cables in an internal
environment. The course covers all copper cabling but
hands on sessions focus on unshielded Twisted Pair.
</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
        <li>Recognise different copper cables and when to use them.</li>
              <li>Install and terminate UTP cables.</li>
              <li>Test and certify UTP cables.</li>
      </ul>
        <h5>
        <b>Copper cabling systems training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Professional cable installers.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>None</p>
              
							<li><b>Duration</b></li>
							
              <p>2 days</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Copper cabling systems training course contents</b></h3>
      <ul>
        <li>Communications principles</li>
        <p>
          Use of cables in data networks, Use of cables in
telephone networks, conductors and insulators,
current, resistance, voltage and Ohms law. </p>
        <li>Copper cabling
</li>
        <p>per cabling
Coaxial versus twisted pair. UTP and STP. Cat 5,
5e, 6 and 7. Straight through, cross over, others.
<br /><span>Hands on:</span> Building a simple network.</p>
        <li>Cable termination</li>
        <p>Cable termination
Preparing cables for termination, termination
techniques, termination tools. Wiring standards,
colour codes. <br /><span>Hands on:</span> Making your own cables
and using them in the simple network.</p>
        <li>Cable architectures</li>
        <p> Structure cabling system components, topologies,
horizontal wiring, vertical wiring, telecomms
rooms, server rooms. Hubs, switches and routers
implications. Trunking. Cabling documentation,
symbols and abbreviations. <br /><span>Hands on:</span> punch
blocks, testing continuity.
</p>
        <li>Cable installation</li>
        <p>Site surveys: pathways and spaces, support
structures, distance limitations. Recommended
installation practices, laying and setup, retrofits.
Health and safety factors, fire and building codes.
<br /><span>Hands on:</span> Performing a site survey, installing
cable with floor boxes.
</p>
				<li>Testing</li>
				<p>Basic testing, volt meters, tone set, Cat 5 testers,
Cat 5e testers, Cat 6 testers. Certifying
performance, Cat 5, 5e and 6 performance
parameters. External factors. Common faults.
<br /><span>Hands on:</span> Testing an installation, troubleshooting
faults.

        </p>
				<li>Other aspects</li>
				<p>Telephony cables, shielded cables. <br /><span>Hands on:</span>
installing telephone cable, testing continuity.</p>
      </ul>

Systems & Network Training

Network & Security

Network Engineer

Copper cabling for engineers

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of all the maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems of all key electrical equipment including: transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries. It will cover in detail all the inspection methods and tests required to identify faults and deficiencies in electrical equipment, as well as, the repair techniques and available refurbishment methods.</p>
<p>The course will also cover the activities required to commission this equipment and it will also cover all protective systems associated with this equipment.  The objective of the seminar is to maximize the efficiency, reliability, and longevity of this type of equipment by providing an understanding of the common problems and repair techniques, preventive and predictive maintenance.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Electrical Equipment Testing and Maintenance: </strong>Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Inspection and Diagnostics: </strong>Learn about the inspection and diagnostics required for all the components of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Troubleshooting:</strong> Determine all the troubleshooting activities required to minimize the downtime and operating cost of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Online Condition Monitoring:</strong> Learn about online condition monitoring of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Repair and Refurbishment: </strong>Obtain a detailed understanding of the various methods used to repair and refurbish transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Efficiency, Reliability, and Longevity: </strong>Learn the various methods used to maximize the efficiency, reliability, and longevity of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Rotating </strong><strong>Equipment Vibration Analysis and Balancing Methods:</strong> Learn about vibration analysis and balancing methods of motors and generators.</li>
<li><strong>Electrical Equipment Codes and Standards: </strong>Learn all the codes and standards applicable for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Equipment Causes and Modes of Failure: </strong>Understand the causes and modes of failure of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Generator Upgrades and Rewinds:</strong> Learn the various methods used to upgrade and rewind a generator</li>
<li><strong>Protective Systems: </strong>Obtain a detailed understanding of all protective systems required for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals (this course is suitable for individuals who do not have an electrical background)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>The relevant material of the 'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Electrical Equipment Maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems Manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment

Team of 10, pp

Normal Fee, pp

<h3>Networks demystified training course description</h3> 
				<p>A concise overview course covering all aspects of networking with particular emphasis of use of the 7 layer model as a framework for discussing and learning new network terms enabling delegates to recognise the main buzzwords used in the industry.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
        <li>Use the 7 layer model to classify networking terms.</li>
					<li>Differentiate between LANS and WANS.</li>
                    <li>Recognise bandwidth measurements.</li>
                    <li>List LAN and WAN technologies.</li>
                    <li>Recognise cabling issues in a network. </li>
                  </ul>
       
        <h5>
        <b>Networks demystified training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Sales staff, managers and other non-technical personnel.<br />
Technical personnel may benefit more from our Intro to data communications and networking course.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>None.</p>
              
							<li><b>Duration</b></li>
							
              <p>1 day
						</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Networks demystified training course contents</b></h3>
      <ul>
				<li>What are networks?</li><p>
What is a network? Types of network, Local Area
Networks (LANs), Wide Area Networks (WANs),
connecting networks together with routers.
</p><li>The 7 layer model</li><p>
What is the 7 layer model? The importance of
standards, using the 7 layer model to classify
networking terms.
</p><li>Cables</li><p>
Copper, Fibre, Air, standards, connectors, LAN
cables, WAN cables, distance limitations, hubs and
repeaters, other issues. The radio spectrum.
</p><li>Bandwidth</li><p>
Bits and bytes. Bandwidth measurements,
common technologies and their bandwidth, the
impact of applications on bandwidth. Full and half
duplex. Joining cables together to increase
bandwidth (Link aggregation).
</p><li>LANs and WANs</li><p>
What is Ethernet? What is WiFi? What are Leased
lines? What is MPLS?
</p><li>Ethernet switches</li><p>
Ethernet 'packets', MAC addresses, what is a
switch, what is the difference between a hub and a
switch.
</p><li>TCP/IP</li><p>
What is TCP/IP? What is a protocol? What is IP?
What is TCP? The role of routers in joining LANS
and WANS, What is the Internet?
	</p><li>Applications</li><p>
Ways to use the network, clients, servers, web
browsing and HTTP, Email, instant messaging,
multimedia applications.
</p>
      </ul>

Networks demystified

<h3><b>Data comms training course description</b></h3>
        <p>A hands on training course introducing the concepts of
data communications, moving on to covering both LAN
and WAN technology. Quizzes are used extensively to
ensure material has sunk in and to maximise learning
time. Hands on sessions ensure that by the end of the
course delegates have made cables, built LANS and
WANS, configured TCP/IP, switches and routers.
</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
        <li>Use the seven layer model to classify networking buzzwords.</li>
				<li>Build and troubleshoot Ethernet, LAN/WAN and WiFi networks</li>
				<li>Explain the difference between switches and routers.</li>
				<li>Connect networks with routers.</li>
        </ul>
        <h5>
        <b>Data comms training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Anyone who requires a technical introduction to networks.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>None.</p>
              
							<li><b>Duration</b></li>
							
              <p>3 days</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Data comms training course contents</b></h3>
      <ul>
        <li>What are networks?</li>
				<p>What is data communications? What are networks? Types of network, LANs, LAN choices, WANs, WAN choices, PANs, SANs, MANs, connecting networks. Internetworks, the internet, clouds.</p>
						  
		 
<li>Networks and standards</li>
				<p>
Standards bodies, ISO, ITU, IEEE, IETF, OSI 7 layer
reference model, TCP/IP and OSI, ping and the 7 layer
model, encapsulation, fragmentation.</p>
	
<li>The physical layer</li>
				<p>
Transmission media: Copper, Fibre, RF, UTP, Cat
5/5e/6/7..., RJ45, straight and cross over cables. Coax,
Fibre cable &amp; connectors, SFP, MMF, SMF, radio
spectrum, frequencies, ranges, noise and electrical
distortion, repeaters. <br /><span>Hands on</span> Cabling, ping.</p>
	
<li>Bandwidth</li>
				<p>
Definition, Bits, bytes, speeds, simplex, half/full duplex,
a/symmetrical, aggregation, latency. Calculating
bandwidth requirements.</p>
	
<li>The Data Link layer</li>
				<p>
Frames, classifications, standards, LAN/WAN layer 2
technologies (Point to point, virtual circuits).</p>
	
<li>Ethernet</li>
				<p>
What is Ethernet? 802.3, evolution from CSMA/CD,
choosing cables, topologies, NICs, MAC addresses.
Ethernet frame format.
<br /><span>Hands on</span> Analysing Ethernet frames.</p>
	
<li>Ethernet switches</li>
				<p>
Connecting multiple devices, switches work at layer 2,
Switches vs. hubs, simultaneous conversations, full
duplex, MAC address database, how switches work,
switch benefits, loops, STP. Console ports.
<br /><span>Hands on</span> Switches and WireShark, configuring
switches, broadcast storms, STP.</p>
	
<li>VLANS</li>
				<p>
What are VLANs, why have VLANs. <br /><span>Hands on</span> The
effect of VLANs on network traffic.</p>
	
<li>Wireless LANs</li>
				<p>
Type of wireless network. WiFi, 802.11b/g/n/ac, WiFi6,
antennae, interference, 802.11 frame format, CSMA/CA,
half duplex, Wireless Access Points, security.
<br /><span>Hands on</span> Building a WiFi network.</p>
	
<li>WANS</li>
				<p>
WAN architecture, WAN types, service providers,
access equipment, DTE, DCE, core equipment, WANs
and the 7 layer model, choosing a WAN.</p>
	
<li>WAN access</li>
				<p>
Point to point, multi access, Internet, phone lines, leased
lines, xDSL, broadband architecture. DOCSIS, FTTH,
PON, SD-WAN. Older technologies (if required):
Modems, ISDN, 64k, E1, TDM.</p>
	
<li>Packet switched networks</li>
				<p>
Packet switching, virtual circuits, Hub &amp; spoke, partial &amp;
full mesh, MPLS, MPLS and routers, Why MPLS? MPLS
-TE, MPLS VPN, Internet VPN. Older technologies (if
required).</p>
	
<li>Service provider technologies</li>
				<p>
Transport plane, SDH, SONET, WDM, CWDM, DWDM,
DWDM architectures, OTN.</p>
	
<li>TCP/IP</li>
				<p>
Definition, protocols, services, internetworking, the
Internet, intranets, IAB, RFCs, IP header, IP addressing,
subnet masks, IPv6, TCP, UDP.
<br /><span>Hands on</span> IP address and subnet mask configuration.</p>
	
<li>Routers</li>
				<p>
What are routers? Routers vs switches, when to route
and when to switch, default gateways, routing tables,
static routes, routing protocols. Firewalls, how firewalls
work.
<br /><span>Hands on</span> Router configuration, tracert.</p>
	
<li>Applications</li>
				<p>
Clients, servers, web, HTTP, Email, resource sharing,
IM, VoIP, Video over IP, terminal emulation, ftp, ssh.
<br /><span>Hands on</span> telnet</p>
				
			
</ul>

Intro to data communications & networking

<h3><b>Application delivery training course description</b></h3>
      <p>A concise hands on course covering section 1 of the F5 networks AD fundamentals exam. The course focuses on the technology and not any one manufacturers product. This will enable delegates to work with devices from any manufacturer. Practical hands on with Cisco and Microsoft systems follow the major sessions to reinforce the theory.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
       <li>Explain, compare and contrast the OSI layers.</li>
        <li>Explain protocols and technologies specific to the data link layer.</li>
        <li>Explain protocols and apply technologies specific to the network layer.</li>
        <li>Explain the features and functionality of protocols and technologies specific to the Transport layer.</li>
        <li>Explain the features and functionality of protocols and technologies specific to the Application layer</li>
      </ul>
       
        <h5>
        <b>Application delivery training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Anyone taking the F5 networks AD fundamentals exam.
        <br />Technical staff working in Application delivery.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>None.</p>
              
							<li><b>Duration</b></li>
							
              <p>3 days
						</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Application delivery training course contents</b></h3>
      <ul>
				<li>What is TCP/IP?</li><p>
Protocols, services. The Internet, RFCs, The OSI
7 layer model. Layer 1 cables.
</p><li>Ping and addressing</li><p>
Host configuration of IP addresses, subnet masks,
default gateways, ipconfig, ping. <br /><span>Hands on</span>
Configuring TCP/IP, ping.
</p><li>Ethernet and the data link layer</li><p>
802.3, evolution, choosing cables, topologies,
CSMA/CD, hubs, NICs, MAC addresses. <br /><span>Hands on</span> Analysing MAC addresses.
</p><li>IP and Ethernet</li><p>
Relationship. <br /><span>Hands on</span> ARP.
</p><li>What is a switch?</li><p>
Switches connect multiple devices, switches
versus hubs, simultaneous conversations,
switches work at layer 2, the forwarding database,
how the forwarding database is built, broadcast
and collision domains. <br /><span>Hands on</span> Difference
between hubs and switches.
</p><li>Link aggregation</li><p>
Loops, broadcast storms, STP, Architectures,
modes, link aggregation, load sharing, resilience.
<br /><span>Hands on</span> fail over times.
</p><li>VLANs</li><p>
Virtual versus physical LANs, Why have VLANs?
Broadcast domains. <br /><span>Hands on</span> VLANs effect on
traffic.
</p><li>IP</li><p>
IP datagram format, ICMP datagram format.
<br /><span>Hands on</span> Analysing IP and ICMP packets.
</p><li>IP addressing</li><p>
Format of addresses, registering, dotted decimal
notation, choosing addresses, DHCP. <br /><span>Hands on</span>
impact of addressing errors.
</p><li>Routing</li><p>
What is a router? Reason for routing, network
addressing, default gateways, how routing works,
routing and addresses, routing tables, traceroute.
<br /><span>Hands on</span> Using a routed network.
</p><li>Routing protocols</li><p>
IGPs, EGPs, RIP &amp; OSPF. <br /><span>Hands on</span> Configuring
routers for RIP and OSPF.
</p><li>Subnetting</li><p>
When to subnet, subnet masks, working with
subnetting, CIDR notation. <br /><span>Hands on</span> Changing
the routed network to use subnetting.
</p><li>The transport layer</li><p>
UDP, Ports, TCP, acknowledgements, sliding
windows. <br /><span>Hands on</span> Analysing packets.
</p><li>Applications</li><p>
Clients, servers, web, Email SMTP, resource
sharing, IM, VoIP, Video over IP, terminal
emulation, FTP. <br /><span>Hands on</span> FTP, SIP.
</p><li>Web pages</li><p>
URLs, DNS, names to IP addresses. HTTP,
versions and status codes. Keepalives, cookies.
<br /><span>Hands on</span> Analysing HTTP headers.
</p>
      </ul>

Application delivery fundamentals

<h3><b>Definitive Ethernet switching course description</b></h3>
        <p>A hands on comprehensive look at Ethernet switches
          with extensive coverage of VLANs. The course focuses
          on the technology and not any one manufacturers
          product enabling delegates to configure switches from
          any manufacturer. </p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
        <li>Configure and troubleshoot switches using:<br />
          Console port<br />
          telnet<br />
          HTTP<br />
          TFTP<br />
        </li>
        <li>Configure and troubleshoot switch features such as:<br />
          Duplex/speed<br />
          Port based MAC security<br />
          Spanning Tree<br />
          Link aggregation<br />
          Tagged ports<br />
        </li>
        <li>Configure and troubleshoot VLANs. </li>
        </ul>
        <h5>
        <b>Definitive Ethernet switching course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Technical staff.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>Intro to data communications &amp; networking.</p>
              
							<li><b>Duration</b></li>
							
              <p>3 days</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Definitive Ethernet switching course contents</b></h3>
      <ul>
        <li>What is Ethernet?</li>
        <p> LANs, network cards and cables, CSMA/CD,
          Ethernet frames, Ethernet evolution, 802.3.<br />
          <span>Hands on:</span> ping, Ethernet speeds, CSMA/CD.</p>
        <li>Ethernet layer 2</li>
        <p> Layer 2 functions, NICs, MAC addresses, unicasts,
          multicasts and broadcasts, frame formats. <br />
          <span>Hands on:</span> Configuring NICs, Analysing MAC addresses
          with Wireshark</p>
        <li>IP and Ethernet</li>
        <p>Relationship<br />
          <span>Hands on:</span> ARP.</p>
        <li>What is a switch?</li>
        <p>Switches connect multiple devices, switches versus
          hubs, simultaneous conversations, switches work
          at layer 2, the forwarding database, how the
          forwarding database is built, broadcast and
          collision domains <br />
          <span>Hands on:</span> Difference between
          hubs and switches.</p>
        <li>Switch configuration</li>
        <p>Switch configuration
          Managed/unmanaged switches, configuration
methods, reasons to configure switches. Console
ports, HyperTerminal (and alternatives).  <br />
          <span>Hands on:</span> Using the console port to troubleshoot and
          configure switches.</p>
        <li>Switches in more detail</li>
        <p>
          Latency, forwarding mechanisms, switch fabrics. <br />
          <span>Hands on:</span> Using telnet and HTTP to switches.</p>
        <li>Ethernet extensions</li>
        <p>Auto negotiation, Power over Ethernet.<br />
          <span>Hands on:</span>Configuring and troubleshooting switch ports:
          Speed, duplex and security.</p>
        <li>Redundant links </li>
        <p> Loops, broadcast storms, STP, BPDU format, STP
          convergence. <br />
          <span>Hands on:</span> Tracking blocked ports.
          STP convergence.</p>
        <li>Backbone links</li>
        <p>Architectures, link aggregation, LACP, load
          sharing, resilience. <br />
          <span>Hands on:</span> fail over times.</p>
        <li>VLANs</li>
        <p> Virtual versus physical LANs, Why have VLANs?
          Broadcast domains, Creating VLANs, Assigning
          ports to VLANs. <br />
          <span>Hands on:</span> Analysing the effect of
          VLANs on traffic. </p>
        <li>Enterprise VLANs</li>
        <p> VLANS are internal, multiple VLANs, Load
          balancing, Default VLAN, VLAN registration
          protocols: VTP, GVRP, MVRP. <br />
          <span>Hands on:</span> VLANs
          on multiple switches.</p>
        <li>Tagging/Trunking </li>
        <p>Reason for tagging, terminology, tagging process,
          802.1Q, Tag format, VLAN stacking. <br />
          <span>Hands on:</span> Configuring and troubleshooting tags.</p>
        <li>STP variants</li>
        <p> RSTP, Common STP, Multiple STP, PVST, ring
          alternatives. <br />
          <span>Hands on:</span> RSTP.</p>
        <li>Inter VLANs</li>
        <p>Layer 3 switching, IP addressing rules,
          Interconnecting VLANs. <br />
          <span>Hands on:</span> Routing
          between VLANs. </p>
        <li>Troubleshooting Ethernet</li>
        <p>Methods, tools, locating faults, layer 1 issues, layer 2
          issues<br />
          <span>Hands on:</span> Fixing the network.</p>
      </ul>

Definitive Ethernet switching for engineers

<h3><b>Essential GEPON training course description</b></h3>
      <p>Designed to benefit those requiring an in depth
knowledge of the principles and applications of the
IEEE Ten Gigabit Ethernet and Gigabit Ethernet
Passive Optical Networking and Fibre to the X in NG
network applications and their associated equipment,
its flexibility and function within a modern transmission
network.<br />
Using an effective mix of instruction and correlation to
theory based learning the delegate will gain a complete
understanding of the equipment and the tasks to be
undertaken in a real life situation.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
        <li>Compare FTTx networks.</li>
																				<li>Compare PON variants.</li>
                    <li>Recognise the GEPON architecture.</li>
                    <li>Explain how GEPON works.</li>
                    <li>Recognise GEPON issues.</li>
                  </ul>
       
        <h5>
        <b>Essential GEPON training course details</b> </h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
              <p>Anyone requiring GEPON knowledge.</p>
              
							<li><b>Prerequisites:</b></li>
							
              <p>Introduction to data communications and networking.</p>
              
							<li><b>Duration</b></li>
							
              <p>2 days
						</p>
              
							
              
              
						</ul>
					</div>
				</div>
      <h3><b>Essential GEPON training course contents</b></h3>
      <ul>
				<li>FTTN, FTTC, FTTH </li><p>
Single Mode Fibre (SMF) and various types, Multimode Fibre (MMF), Fibre Safety and properties (Dispersion/attenuation), Fibre Reel cables and types, Fibre installation and air blown fibre, Transmitters and receivers - power budget/laser classes, Fibre to the home (FTTH), FTTC (Fibre to the Cabinet), FTTN (Fibre to the node), FTTD (Fibre to the Desk), FFTH Topologies and wavelengths, Active or Passive Optical Network (PON).

</p><li>WDM equipment and GPON OSP design </li><p>
Wavelength considerations, WDM/DWDM/CWDM EDFA optical amplification, AWG (Arrayed Waveguide Grating) splitters, Couplers (splitters) and losses, Optical splitters 1x2, 1x4, 1x8, 1x16, 1x32, 1x64, 2x64.

</p><li>IEEE PON variants </li><p>
Gigabit Ethernet Passive Optical Network (GEPON), Time Division PON (TDM-PON), Wave Division Multiplexing PON (WDM-PON), 1Gbps, 10Gbps, 40Ggps, 100Gbps, Strategies for TDM-PON to WDM-PON migration, Architecture of NG-PON (hybrid WDM/TDM PON), Additional services than triple play.

</p><li>GEPON design </li><p>
GEPON OSP centralized design, GEPON OSP distributed design, GEPON PON splitters x4 x8 x32, Fibre splice trays / fibre cassette trays / fibre enclosures, GEPON field testing /GEPON field installation verification, GEPON physical layer testing, Optical Time Domain Reflectometer (OTDR), Optical power source /Optical power meter, Optical Return Loss (ORL), APON/BPON/GPON/EPON/GEPON/10-GEPON comparison.

</p><li>IEEE 802.3ah GEPON: Ethernet in the first mile </li><p>
IEEE 802.3 options, Optical Ethernet options, Ethernet in the first mile, 1000BASE-LX, 1000BASE-SX, IEEE 802.1Q VLANs, Q-in-Q and MAC-in-MAC. QofS Ethernet TOS and priority methods PCP and DiffServe, Reference model / terminology / architecture, Example of ONT functional blocks, Example of OLT functional blocks, FTTx scenarios, The four switching arrangements for external access network backup.

</p><li>IEEE 802.3av 10-GEPON </li><p>
Physical layer, 10GBASE-SR, 10GBASE-LX4, 10GBASE-ER, 10GBASE-LR, 10GBASESW, 10GBASE-LW, 10GBASE-EW, Enhancement band, Bit rate and wavelengths, Compatibility, Forward error correction.

</p><li>IEEE 802.3ca 25G, 50G and 100G NG-EPON </li><p>
MAC frame structure, Downstream multiplexing / Upstream multiplexing, Media access control and ONU registration, Alarm messages.

</p><li>IEEE 802.3bk extended EPON </li><p>
Laser Types PRX40 and PR40, Reference model.

</p><li>GEPON issues and standards </li><p>
GEPON components OLT / GEPON ONT and examples GEPON management, RG (Residential Gateway), HPNA (Home Phone Network Alliance), Power Line Carrier (PLC), GPON DLNI, G.hn or G.9960 MOCA, FTTH Council certification, Standard for network certification, Qualify for use of the fibre-connected home badge, GEPON frame synchronization to network timing, Direct clock synchronization interface (BITS), Multiservice Access Platform (MSAP), Software planning tool. Superconnected cities / voucher scheme.

</p><li>Ethernet OAM </li><p>
Link monitoring, remote failure indication, Remote loopback.
</p>
      </ul>

Essential GEPON

<h3><b>GPON and FTTx networks training course description</b></h3>
      <p>  Designed to benefit those requiring an in depth
knowledge of the principles and applications of Ten
Gigabit and Gigabit Passive Optical Networking and
Fibre to the X in NG Networks applications and their
associated equipment, its flexibility and function within
a modern transmission network.<br />
Using an effective mix of 'hands on' equipment
instruction and correlation to theory based learning the
delegate will gain a complete understanding of the
equipment and the tasks to be undertaken in a real life
situation.</p>
        
				<h5><b>What will you learn</b></h5>
				<ul>
				 
  <li>Compare PON/FTTx systems.</li>
																				<li>Explain network elements and designs.</li>
                    <li>Support applications and network interfaces.</li>
                    <li>List circuit provisioning and bandwidth requirements.</li>
                    <li>Understand upstream &amp; downstream issues.</li>
                     <li>Describe headend &amp; network elements/OLT-ONT.</li>
                     <li>Perform network testing with OTDR test sets.</li>
				</ul>
        <h5>
        <b>GPON and FTTx networks training course details</b></h5>
				<div>
					<div>
						<ul>
							<li><b> Who will benefit:</b> </li>
							
           <p>Anyone working with GPON and FTTx.</p>
              
							<li><b>Prerequisites:</b></li>
							
                 <p>Introduction to data communications and networking.</p>
              
							<li><b>Duration</b></li>
							
              <p>5 days
						</p>
              
							
               
              
						</ul>
					</div>
				</div>
     <h3><b>GPON and FTTx training course contents</b></h3>
      <ul>
				<li>FTTN, FTTC, FTTH </li><p>
SMF, MMF, Fibre safety and properties (dispersion/attenuation), Fibre reel cables and types, Fibre installation and air blown fibre, Transmitters and receivers - power budget/laser classes. Fibre to the home (FTTH), FTTC (Fibre to the Cabinet), FTTN (Fibre to the node) , FTTD (Fibre to the desk), FFTH topologies and wavelengths, Active or passive optical network.

</p><li>WDM equipment and GPON OSP design </li><p>
Wavelength considerations, WDM/DWDM/CWDM, EDFA optical amplification, AWG (Arrayed Waveguide Grating) splitters , Couplers (splitters) and losses, Optical splitters 1x2, 1x4, 1x8, 1x16, 1x32, 1x64, 2x64.

</p><li>PON variants </li><p>
Gigabit passive optical network (GPON), Gigabit Ethernet passive optical network (GEPON), Time division PON (TDM-PON), Wave Division Multiplexing PON (WDM-PON), 1Gbps, 10Gbps, 40Ggps, 100Gbps FSAN (Full Service Access Network) NGA (Next Generation Access), Strategies for TDM-PON to WDM-PON migration, Architecture of NG-PON (hybrid WDM/TDM PON), Additional services than triple play.

</p><li>GEPON design </li><p>
GPON OSP centralized and distributed design, GPON PON splitters x4 x8 x32, Fibre splice trays /cassette trays &amp; enclosures, GPON field testing and installation verification, GPON physical layer testing, Optical time domain reflectometer (OTDR), Optical power source &amp; meter, Optical return loss (ORL), APON/BPON/GPON/EPON comparisons.

</p><li>GPON ITU-T G.984.1 </li><p>
Reference model, terminology &amp; architecture, Access network system management functions. ONT &amp; OLT functional block examples. FTTx scenarios, 4 switching arrangements for external access network backup.

</p><li>GPON ITU-T G.984.2 </li><p>
Physical layer, Enhancement band, Bit rate and wavelengths, FEC and RAMAN.

</p><li>GPON ITU-T G.984.3 </li><p>
Frame structure, GPON encapsulation method (GEM), GTC adaptation and framing sublayer protocol stack, Status reporting &amp; traffic monitoring DBA (SR-DBA &amp; TM-DBA), Transmission container (T-CONT) types, Downstream &amp; upstream multiplexing, GEM port identifier, Media access control and ONU registration, Extended bandwidth assignment model scheduling architecture, PLOAM &amp; alarm messages, Downstream &amp; Upstream FEC, Process order in a GTC transmit flow.

</p><li>GPON ITU-T G.984.4 and G.988 ONT management and control interface (OMCI) </li><p>
Management interface, Reference model, Typical ONT with SCTE 55-1 or SCTE 55-2 compliancy.

</p><li>GPON ITU-T G.984.5 enhancement band </li><p>
Band options, GPON NGA, Wavelength allocation.

</p><li>GPON ITU-T G.984.6 optical reach extension (G.984.re) </li><p>
Reach extension (RE), OA-based and OEO-based reach extenders, Protection, Reach extender with OTDR blocking filters (BF) and bypass (BYP) filters.

</p><li>GPON ITU-T G.984.7 long reach </li><p>
Quiet Window.

</p><li>10-GPON ITU-T G.987.1 (XG-PON) </li><p>
Scenarios, reference access network architecture, XG-PON with G-PON through WDM1r, G-PON and XG-PON wavelength allocation, G-PON and XG-PON co-existence with video overlay option, RE migration scenarios.

</p><li>G.989 40Gbps XG-PON2 </li><p>
Functional reference architecture, NG-PON2 system coexistence with legacy systems, Definitions of legacy compatibility terminology.

</p><li>GPON issues and standards </li><p>
GPON components GPON OLT / GPON ONT, GPON management, Operational support systems (OSS), Network management systems (NMS), OMCI (ONT Management control interface), RG (Residential gateway), Data and prioritised voice channel product, GPON broadband-forum standards, Broadband-forum , TR-069 and TR-156, HPNA (home phone network alliance), Powerline carrier (PLC), GPON DLNI G.hn or G.9960, MOCA, FTTH council certification standard for network certification. Fibre-connected home badge, Ethernet in the first mile (EFM), GPON frame synchronization to network timing, Direct clock synchronization interface (BITS), Multiservice access platform (MSAP), Software planning tool, Superconnected cities / voucher scheme.

</p><li>Hands on practical assignments </li><p>
Single and multimode fibre recognition, Fibre Cleaning methods, Checking cleaning with an optical microscope, Optical light source and optical power meter referencing, PON splitter and fibre drum testing with an optical power meter, 6km classroom passive optical network testing with an OTDR at 1310/1550nm, Using decibels (dB's) and decibel milliwats (dBm's), Designing networks up to 20km long using vendor specifications (power budget), Fault finding with a visible fault locator.
</p>
      </ul>

GPON and FTTx networks

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>Transmission lines and sub-stations are essential components in the electrical power systems. Proper design and maintenance are crucial for transmission lines to maintain a continuous operation. The objective of this 5-day training course is to deal appropriately with control systems, design characteristics and electric &amp; magnetic fields. Participants will gain a better understanding on the corona and gap discharge phenomena, constructional features, and optimization of the transmission lines.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By participating in this course, you will be able to:</p>
<ul>
<li>Understand transmission line design and its application</li>
<li>Examine different types of conductors and electrical characteristics</li>
<li>Explore basic and general transmission line parameters</li>
<li>Prevent overvoltage through insulation design</li>
<li>Determine surge impedance and corona effects</li>
<li>Calculate and measure electric and magnetic fields</li>
<li>Comprehend the impact of audible noise and electromagnetic interference</li>
<li>Identify interference within the transmission line systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The course will greatly benefit the following groups but not limited to:</p>
<ul>
<li>Electrical Engineers</li>
<li>Civil Engineers</li>
<li>Transmission &amp; Distribution Engineers</li>
<li>Substation Operators</li>
<li>Safety Engineers</li>
<li>Reliability Engineers</li>
<li>Facility &amp; Plant Engineers</li>
<li>Technical Engineers</li>
<li>Design Engineers</li>
<li>Plant Supervisors</li>
<li>Electrical Contractors</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.</span></p>
<p><em><span>Course Duration: 5 days in total (35 hours).</span></em></p>
<p><strong><span>Training Schedule</span></strong></p>
<p><span>0830 - Registration </span><span>0900 - Start of training </span><span>1030 - Morning Break </span><span>1045 - Training recommences </span><span>1230 - Lunch Break </span><span>1330 - Training recommences </span><span>1515 - Evening break </span><span>1530 - Training recommences </span><span>1700 - End of Training</span></p>
<p><span>The maximum number of participants allowed for this training course is 25.</span></p>
<p><span>This course is also available through our Virtual Instructor Led Training (VILT) format.</span></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><span>Your expert course leader is a professional engineer with extensive experience in power system studies, substation design field-testing, and EHS programs settings for Mining and Electrical Utilities sectors. He was formally the Engineering Manager at GE Canada in Ontario. He received his M.Sc. in electrical engineering from the University of New Brunswick and his MBA from Laurier School of Business in Waterloo.</span> <span>He has managed and executed more than 150 engineering projects on substation design EMF audits and power system studies and analyses, EMF audits and grounding audits, for major electrical utilities, mines, oil and gas, data centers, industrial and commercial facilities in Canada and the U.S. He is a certified professional engineer in the provinces of Ontario and Alberta.</span></p>
<p><span>He has various IEEE publications, has served as a technical reviewer for many IEEE journals in power systems and control systems, and is the chair of the Industry Application Chapter (IAS) for IEEE Toronto Section. He remains a very active member for the IEEE substation committee of IEEE Std. 81 ground testing (WGE6) and IEEE Std. 80 ground design (WGD7). A certified electrical safety trainer by GE Corporate and a Canadian Standard Association (CSA) committee member at the mining advisory panel for electrical safety, he also taught many technical courses all over Canada to industrial customers, electrical consultants as well as to electrical utilities customers.</span></p>
<p><span>Highlighted Projects:</span></p>
<ul>
<li><span>Various Power System Studies for 345/230 kV Stations - Nova Scotia Power (EMERA)</span></li>
<li><span>RF audits for Telecom tower and antennas - Cogeco/Rogers Mobile</span></li>
<li><span>Power System analysis - Powell Canada</span></li>
<li><span>Structural/Geotechnical Design and upgrades - Oakville Hydro</span></li>
<li><span>Underground Cables testing and sizing - Plan Group</span></li>
<li><span>Relay programming and design optimization - Cenovus Canada</span></li>
<li><span>Different Arc Flash Analysis and BESS Design - SNC Lavalin</span></li>
<li><span>Environmental site assessment (ESA) Phase I/II for multiple stations - Ontario</span></li>
<li><span>Electromagnetic compatibility (EMC) assessment for Toronto LRT expansion - MOSAIC</span></li>
<li><span>Battery energy storage system (BESS) installation at City of London - Siemens Canada</span></li>
<li><span>EMF audits for 500 kV Transmission Lines - Hydro One</span></li>
<li><span>EMF audits for 500 kV Transmission Lines - Hydro Quebec</span></li>
<li><span>AC interference for 138 kV line modeling and mitigations - HBMS Mine</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Educators providing Courses in Bradford

Courses matching "Cables"

Concept Pro - Complete CCTV Solutions (Head Office)

By Videcon Training

Copper cabling for engineers

By Systems & Network Training

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment

By EnergyEdge - Training for a Sustainable Energy Future

Networks demystified

By Systems & Network Training

Intro to data communications & networking

By Systems & Network Training

Application delivery fundamentals

By Systems & Network Training

Definitive Ethernet switching for engineers

By Systems & Network Training

Essential GEPON

By Systems & Network Training

GPON and FTTx networks

By Systems & Network Training

Transmission Lines: Design, Analysis and Applications

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location