Name: Combustion Engineering for Coal Fired Power Plants
Price: 3009 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines. This course will also cover in detail all the components of these turbines, instrumentation, control systems, governing systems, and selection criteria.</p>
<p>The main focus of this course will be on the failure modes of steam turbine components, causes and solutions for component failure, maintenance, refurbishment and overhaul, rotor dynamic analysis of steam turbines, and computer simulation of steam turbine rotor dynamics. All possible failure modes of steam turbine components and the maintenance required to prevent them will be discussed in detail. Examples of rotor dynamic analysis, and stability criteria will be covered thoroughly.</p>
<p>This course will also provide up-dated information in respect to all the methods used to enhance the availability, reliability, and maintainability of steam turbines, increase the efficiency and longevity of steam turbines, and improve the rotor dynamic stability. This course will also cover in detail all steam turbine valves, jacking oil system, turning gear, turbine supervisory system, steam turbine monitoring technology, validation, and verification tests, performance testing of steam turbines and steam turbine codes especially ASME PTC6.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Steam Turbine Components and Systems:</span></strong><span> Learn about all components and systems of the various types of steam turbines such as: stationary and rotating blades, casings, rotor, seals, bearings, and lubrication systems</span></li>
<li><strong><span>Steam Turbine Failure Modes, Inspection, Diagnostic Testing, and Maintenance:</span></strong><span> Understand all the failure modes of steam turbine components, causes and solutions of steam turbine component failure, inspection, diagnostic testing, and all maintenance activities required for steam turbines to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Steam Turbine Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation, control systems, and governing systems of steam turbines</span></li>
<li><strong><span>Steam Turbine Reliability and Maintainability:</span></strong><span> Increase your knowledge about all the methods used to enhance the reliability and maintainability of steam turbines as well as the predictive and preventive maintenance required for steam turbines</span></li>
<li><strong><span>Steam Turbine Selection and Applications:</span></strong><span> Gain a detailed understanding of the selection considerations and applications of steam turbines in steam power plants, co-generation, combined-cycle plants, and drivers for compressors pumps, etc</span></li>
<li><strong><span>Steam Turbine Valves, Load-Frequency Control, Turbine Bypass Systems, and Steam Turbine Superheater Attemperators:</span></strong><span> Gain a thorough understanding of all steam turbine valves, load-frequency control, turbine bypass systems, and steam turbine superheater attemperators</span></li>
<li><strong><span>Jacking Oil System and Turning Gear:</span></strong><span> Learn about the turbine jacking oil system and turning gear operation</span></li>
<li><strong><span>Turbine Supervisory System:</span></strong><span> Gain a thorough understanding of the turbine supervisory system</span></li>
<li><strong><span>Steam Turbine Monitoring Technology, Validation, and Verification Tests for Power Plants:</span></strong><span> Learn about steam turbine monitoring technology, validation, and verification tests for power plants</span></li>
<li><strong><span>Steam Turbine Codes:</span></strong><span> Learn about steam turbine codes including ASME PTC6, DIN Test Code, and International Electrotechnical Commission (IEC) Doc 1, IEC Doc B</span></li>
<li><strong><span>Steam Turbine Rotor Dynamic Analysis, Campbell, Goodman, and SAFE Diagrams: </span></strong><span>Gain a thorough understanding of steam turbine rotor dynamic analysis, Campbell, Goodman, and SAFE diagrams</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>STEAM TURBINE TECHNOLOGY MANUAL (includes practical information about steam turbines maintenance, testing, and refurbishment - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Steam Turbine Technology

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVRs), governing systems, and protective systems.</p>
<p>The focus will be on maximizing the efficiency, reliability and longevity of these equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p>
<p>The emphasis of this course is on protective systems, inspection methods, diagnostic testing, troubleshooting, modern maintenance techniques, refurbishment, rewind and upgrade options, as well as advanced methods for preventing partial discharge and other failures.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Equipment Operation:</strong> Gain a thorough understanding of the operating characteristics of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Diagnostics and Inspection:</strong> Learn in detail all the diagnostic techniques and inspections required of critical components of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Testing:</strong> Understand thoroughly all the tests required for the various types of generators, exciters, AVR's and protective systems</li>
<li><strong>Electrical Generator Protective Systems:</strong> Gain a thorough understanding of all Electrical generator protective systems including: all electrical relays, tripping mechanisms, protective systems for negative phase sequence (unbalance loading), loss of excitation, over fluxing protection (over-voltage and underfrequency), reverse power (generator monitoring), over-speeding, pole slipping / out of step (sudden increase in torque or weakness in excitation), Class A protection, Class B protection</li>
<li><strong>Equipment Maintenance and Troubleshooting:</strong> Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Repair and Refurbishment:</strong> Gain a detailed understanding of the various methods used to repair and refurbish generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Rewind and Upgrade Options:</strong> Discover all options available to rewind and upgrade the generator rotor and stator to enhance the output and reduce downtime</li>
<li><strong>Efficiency, Reliability, and Longevity:</strong> Learn the various methods used to maximize the efficiency, reliability, and longevity of generators, exciters, AVR's and protective systems</li>
<li><strong>Advanced Methods to Prevent Failure:</strong> Gain a thorough understanding of all the methods used to prevent partial discharge, and other failures in generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Sizing:</strong> Gain a detailed understanding of all the calculations and sizing techniques used for generators, exciters, AVR's and protective systems</li>
<li><strong>Design Features:</strong> Understand all the design features that improve the efficiency, reliability of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Selection:</strong> Learn how to select generators, exciters, AVR's and protective systems by using the performance characteristics and selection criteria that you will learn in this course</li>
<li><strong>Equipment Enclosures and Sealing Methods:</strong> Learn about the various types of enclosures and sealing arrangements used for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Commissioning:</strong> Understand all the commissioning requirements for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Codes and Standards:</strong> Learn all the codes and standards applicable for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Causes and Modes of Failures:</strong> Understand causes and modes of failures of generators, exciters, AVR's and protective systems</li>
<li><strong>System Design:</strong> Learn all the requirements for designing different types of generators, exciters, AVR's and protective systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Generator Inspection, Testing, Maintenance, Protective Systems and Refurbishment Manual (this manual covers all the inspection and maintenance activities as well as all protective systems required for generators - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Electrical Generators, Excitation Systems and Governing Systems

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This five-day training course will cover aspects of FPSO operations with an emphasis on management of safety. A background of the methodology used to generate the various safety plans and codes used in the operational safety case will be covered. The course will also review general operational guidelines in the offshore environment to ensure that the operations are completed as designed. This will include offtake operations and maintenance processes for the plant and vessel as well as a session on subsea.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>To enable participants to obtain an in-depth understanding of FPSO operations, safety and maintenance:</p>
<ul>
<li>Provide a broad overview of how an FPSO operation is set up and established in the field</li>
<li>Grasp the various methods used to moor the production units</li>
<li>Analyse information and methods required to establish the operation according to local and international regulations.</li>
<li>Assess the methods used to calculate the safety parameters and requirements to construct an approved valid safety case</li>
<li>Explore conditions to monitor during operations with regards to safety and structure</li>
<li>Inspect various types of hazards associated with production and produced materials</li>
<li>Review regular and emergency operational maintenance requirements</li>
<li>Examine cyclones and weather events causing disconnection</li>
<li>Comprehend manning, training requirements and operations including cargo</li>
</ul>
<p><strong>Case studies and Exercises: </strong> The training course uses real life examples and case studies to explain the setup, preparation, implementation and operational activities required to successfully complete FPSO operations from a safety and maintenance perspective. This will allow the application of participants' newly-acquired knowledge. Case studies also stimulate independent thinking and discussion among the participants.</p>
<p><strong>Case Studies</strong></p>
<p>The case studies proposed for this course will include:</p>
<ul>
<li>A group exercise to consider what is the minimum requirement for the production of a safety case</li>
<li>Generic plan for the development of a maintenance management system using computer software systems (e.g. Amos)</li>
<li>Construction of a UWILD plan to include scope and potential tendering requirements</li>
</ul>
<p><strong>Quizzes</strong></p>
<p>The various quizzes can be expanded or arranged to suit the group/interests and topics covered but will generally include the following topics:</p>
<ul>
<li>Mooring types and location where they are primarily used</li>
<li>Safety cases</li>
<li>Safety management systems</li>
<li>Process hazards and mitigation</li>
<li>UWILD components and regulations</li>
<li>Operations management</li>
<li>Offtake operations</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The course is generally aimed at personnel who are <strong><em>involved in FPSO operations</em></strong> as either offshore crew or onshore support team members. This course will also greatly benefit the following groups but not limited to:</p>
<ul>
<li>Process engineers</li>
<li>Surveyors</li>
<li>Facility engineers</li>
<li>Naval architects</li>
<li>Operations engineer</li>
<li>Health, Safety, Environment (HSE) specialists and managers</li>
<li>Maintenance engineers</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The training course is presented in an interactive workshop format that allows for discussion. The course will be delivered through analysis of case studies and running examples of problems.</p>
<p><em>Course Duration: 5 days in total (35 hours)</em></p>
<p>The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training comprises of information supplemented by visual activities including photographs from various operations and videos of operational and safety activities. Interaction verbally will be necessary to achieve the best learning outcome from the materials.</p>
<p><strong>Course timings and breaks</strong><strong> </strong></p>
<p>0830 - Registration <br />0900 - Start of training <br />1030 - Morning break <br />1045 - Training recommences <br />1230 - Lunch break <br />1330 - Training recommences<br />1515 - Afternoon break <br />1530 - Training recommences <br />1700 - End of training</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has been involved in the Oil and Gas industry for over 28 years in several different roles commencing as a second deck officer on FPSO's and moving through the industry from deck officer to Master, OIM and Field Superintendent. He has also been in charge of semisubmersible and fixed production platforms as field superintendent before moving ashore into senior management roles. On completion of industry specific activities, he moved to teaching roles at South Tyneside Maritime College in the department of marine and simulation and presented live courses to maritime students from cadet to Master. </p>
<p>Prior to returning to Perth in March 2019, he was training manager for a subsidiary of Gaz Transport and Technigaz of France. He has a Master Class 1 certificate with endorsements for hazardous cargoes and a Graduate Certificate in Business Administration as well as multiple course certificates required to operate FPSO's, platforms and semisubmersible facilities. He has been involved in the preparation of national standards for Safety Cases (Australia); Designing and structural setup of competency-based training systems in South East Asia. He was also involved in the development of minimum standards, competency profiles position based and preparation and implementation of training plans to ensure competency in the local staff in Asian operations. He was part of the development team for minimum standards of offshore safety in Australian offshore operations including the implementation of the Common Safety Training Program (CSTP). He was also involved in implementing training plans for both simulator and classroom based courses in LNG operations and cargo tank design and construction.</p>
<p><strong>Highlighted work experience:</strong></p>
<ul>
<li>Premier Petroleum Myanmar Ltd</li>
<li>Petronas Carigali</li>
<li>Newfield Australia (Cartier) Pty Ltd:
<ul>
<li>FPSO Jabiru Venture</li>
<li>FPSO Challis Venture</li>
<li>Onshore OIM</li>
</ul>
</li>
<li>Australian FPSO Management Pty. Ltd.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

FPSO Operations Management & Safety

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This course will begin with a presentation of topics to familiarize Process and Instrumentation Engineers with procedures and practices involved in the choice of sensors related to the measurement of temperature, pressure, level and flow in relation to single-phase flows. It will provide guidance on the optimum commercially available devices through a detailed comparison of their relative merits. At the heart of this course is sensor calibration which is a crucial element for these topics.</p>
<p>The course will also examine the various types of flow control valve, including Globe, Slide, Needle, Eccentric plug and Ball valves and their characteristics in industrial application, while focusing on the problems of Cavitation and Flashing and methods to minimise or eradicate these issues. With the use of examples, industry case studies and a wide range of videos, this course will also cover all aspects of proportional (P), derivative (D) and integral (I) control. In particular, it will address the advantages and disadvantages of PI and PID control. It will also describe Cascade, Feed forward, Split Range, Override and Ratio Control techniques.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By attending this course, participants will acquire the following knowledge and skills:</p>
<ol>
<li>Apply an in-depth knowledge to the measurement of temperature, pressure, level and flow as well as to the fluid mechanics of pipe flows</li>
<li>Assess the advantages and disadvantages of the major flowmeter types including the differential pressure, rotary positive displacement, rotary-inferential, electromagnetic, ultrasonic and Coriolis mass flowmeters to determine the optimum choice for a given application</li>
<li>Make a considered judgement of the choice of fluid level measurement devices</li>
<li>Understand the various types of flow calibration, metering systems and provers</li>
<li>Carry out tank measurement and tank calibration methods and to calculate net sellable quantities</li>
<li>Discuss valve characteristics &amp; trim selection and illustrate the process of control valve sizing</li>
<li>Explain the terms Open and Closed loop</li>
<li>Define Process Variable, Measured Variable, Set Point and Error</li>
<li>Define Direct and Reverse controller actions</li>
<li>Explain the terms Process Lag, Measurement Lag, Transmission Lag, and Response Lag and their effect on controllability</li>
<li>Explain ON/ OFF Control and the inherent disadvantages</li>
<li>Explain Proportional Control, Offset, Gain and Proportional Band and the advantages and disadvantages of Proportional only control</li>
<li>Explain the fundamentals and operation principles of Integral (I) Action and the disadvantages of proportional plus integral control</li>
<li>Explain the fundamentals and operation principles of Derivative (D) Action in conjunction with P action</li>
<li>Describe the operating principles of a PID Controller and explain the applications and advantages of PID control</li>
<li>Describe Cascade, Forward, Split Range and Ratio Control operation principles</li>
</ol>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course will benefit <strong>instrumentation, inspection, control, custody metering and process engineers and other technical staff</strong>. It is also suitable for <strong>piping engineers, pipelines engineers, mechanical engineers, operations engineers, maintenance engineers, plant/field supervisors and foremen and loss control coordinators</strong>.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a Senior Mechanical &amp; Instrumentation Engineer (UK, B. Sc., M.Eng., Ph D) with over 45 years of industrial experience in Process Control &amp; Instrumentation, Pumps, Compressors, Turbines and Control Valve Technology. He is currently a Senior Independent Consultant to various petrochemical industries in the UK, USA, Oman, Kuwait and KSA where he provides consultancy services on both the application and operational constraints of process equipment in the oil &amp; gas industries.</p>
<p>During his early career, he held key positions in Rolls Royce (UK) where he was involved in the design of turbine blading for jet engines, subject to pre-specified distributions of pressure. During this period and since, he has also been closely involved in various aspects of Turbomachinery, Thermodynamics and Fluid Mechanics where he has become a recognised authority in these areas.</p>
<p>Later, he joined the academic staff of University of Liverpool in the UK as a Professor in Mechanical Engineering Courses. A substantial part of his work has been concerned with detailed aspects of Flowmetering - both of single &amp; multiphase flows. He has supervised doctoral research students in this area in collaboration with various European flowmeter manufacturers.</p>
<p>He joined Haward Technology Middle East in 2002 and was later appointed as European Manager (a post which has since lapsed) and has delivered over 150 training courses in Flowmeasurement (single- and multi-phase), Control, Heat Exchangers, Pumps, Turbines, Compressors, Valve and Valve Selection as well as other topics throughout the UK, USA, Oman and Kuwait. During the last two years, he has delivered courses with other training companies operating in the Far and Middle East.</p>
<p>He has published about 150 papers in various Engineering Journals and International Conferences and has contributed to textbooks on the topics listed above.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Process Control and Instrumentation

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong><em> </em></h2>
<p>The Advanced Reservoir Engineering VILT course will address modern practical aspects of reservoir engineering during 5 half-days packed with lectures, virtual exercises, discussions and literature reviews. The participants' understanding of fundamental concepts and modern practical reservoir engineering methods will be deepened and a wide range of topics will be addressed.</p>
<p><strong>Topics covered</strong></p>
<p>The VILT course will emphasise reservoir engineering applications and include topics such as:</p>
<ol>
<li>Rock properties of clastic and carbonate reservoirs</li>
<li>Reservoir characterisation</li>
<li>Reservoir fluid behaviour</li>
<li>Identification of main production mechanisms</li>
<li>Design and analysis of well tests</li>
<li>Production forecasting</li>
<li>Application of Decline Curve Analysis in mature fields</li>
<li>Detailed modeling of wells and reservoirs</li>
<li>Water flooding</li>
<li>Application of EOR methods</li>
<li>Reserves and resource estimation</li>
<li>Reservoir simulation approaches, model construction and well, aquifer and fluid modelling</li>
<li>Development planning</li>
<li>Uncertainty handling and scenario methods</li>
</ol>
<p>Depending on the background and requirements of the participants, some topics may be given more emphasis.</p>
<p> </p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>In this VILT course, reservoir engineering methods will be addressed which are of use in the daily reservoir engineering practice. The focus will be on practical applicability. Use is made of practical and actual reservoir engineering problems and examples to illustrate relevant subjects.</p>
<p>By attending this VILT course, participants will have a deeper knowledge of modern reservoir engineering practices for reservoir development and production, including the construction and use of reservoir models.</p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The VILT course is intended for <strong>experienced reservoir engineers with prior technical or engineering exposure to production activities. </strong>Petroleum engineers and geoscientists who require more than general knowledge of reservoir engineering will also find this course useful.</p>
<p><strong>Participants are invited but not obliged to bring a short presentation (max of 15 minutes) on a practical problem they encountered in their work. This will then be explained and discussed in the VILT class. A short test or quiz will be held at the end the VILT course.</strong></p>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><strong>This VILT course will be delivered online over 5 half-days.</strong> There will be 2 blocks of two hours per day, including lectures, discussion, quizzes and short classroom exercises. Additionally, some self-study will be required. Two breaks of 10 minutes will be provided each day.</p>
<p>Course Duration: 5 half-day sessions, 4 hours per session (20 hours in total).</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your course leader is an independent Reservoir Engineering Consultant. He provides project consultancy, quality assurance and reservoir engineering training for major oil companies, governments, engineering firms and other global customers. Before he retired from Shell in 2012, he held positions as Senior Reserves Consultant for the Middle East and Reservoir Engineering Discipline Lead. He is a petroleum engineering professional, with global experience, mostly in Shell companies and joint ventures (NAM, SSB, SCL, PDO, SKDBV). He has been involved in reserves and resource management, has extensive reservoir modelling and reservoir simulation expertise, and wide experience in the design and delivery of training programmes for employee development.</p>
<p><strong>PROFESSIONAL EXPERIENCE</strong><br />
<strong>2012 - 2016 Independent Reservoir Engineering Consultant</strong><br />
Project consultancy, quality assurance and reservoir engineering training for major oil companies, governments, engineering firms and other global customers. Delivering specialised and general Reservoir Engineering courses to a multitude of international companies.</p>
<p><strong>2008 - 2012 Shell International E&amp;P, the Hague, the Netherlands</strong><br />
Senior Reserves Consultant for the Middle East Region<br />
Assurance of SEC and SPE compliance of reserves and resources in Shell Middle East region. Contributor to the 2012 SPE guidelines on reserves and resources assessment.</p>
<p><strong>2006 - 2008 Shell E&amp;P Technology Solutions, Rijswijk, the Netherlands</strong><br />
Reservoir Engineering Discipline Lead<br />
Responsible for QA/QC of Reservoir Engineering in global E&amp;P projects as well as for staff development. (over 60 international Reservoir Engineers)</p>
<p><strong>2001 - 2005 Centre for Carbonate Studies, SQU, Oman / Shell International E&amp;P</strong><br />
Technology Applications and Research /Shell Representative Office Oman</p>
<p><strong>Petroleum Engineering Manager</strong><br />
PE manager in the Carbonate Research centre, at Sultan Qaboos University in Oman. Industrial research projects and support to teaching on recovery aspects of carbonate reservoir development. Design and delivery of industrial courses on carbonate reservoirs</p>
<p><strong>1997- 2000 Shell International E&amp;P, Rijswijk, the Netherlands</strong><br />
Principal Reservoir engineer. Acting Shell Group Reserves Co-ordinator in 1997-1998. Facilitation of workshops with government shareholders, including discussions on sensitive reserves issues (BSP Petroleum Unit Brunei, PDO Oman, SPDC government Nigeria).<br />
Co-ordination of the NOV subsurface team in Shell Kazakhstan Development BV in 2000. Leading role in Shell Gamechanger project on natural gas hydrates.</p>
<p><strong>1992- 1996 Shell Training Centre, Noordwijkerhout, the Netherlands</strong><br />
Reservoir Engineering Programme Training Director<br />
Directed Shell Group Reservoir Engineering Training. Introduced advanced PE training events, QA/QC and learning transfer measures, Design and delivery of reservoir engineering and multidiscipline courses to Shell staff from a wide range of nationalities.</p>
<p><strong>1985- 1992 Shell International, SIPM, the Hague, The Netherlands</strong><br />
Senior Reservoir Engineer<br />
Full field reservoir simulation projects supporting Field Development Plans, operational strategies and unitisation negotiations for Shell Group Operating Companies in the United Kingdom, New Zealand and Egypt. Major contributor to the Shell internal Gas Field Planning Tool development.</p>
<p><strong>1984- 1985 Geological Survey of the Netherlands (RGD), Ministry of Economic Affairs</strong><br />
Reservoir Engineering Section Head Responsible for Petroleum Engineering advice on oil and gas licences to the Ministry of Economic Affairs. First-hand experience with a government view on resource management.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Advanced Reservoir Engineering

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>The smart meter or smart grid represents the next-generation electrical power system. This system uses information, data &amp; communication technology within generation, delivery and consumption of electric energy. This 4-day course will equip you with the innovations that are shaping the power generation and distribution systems and will cover topics ranging from Smart Metering Architecture, Cybersecurity, Smart Grid Systems and Power Line Communications.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><span>By participating in this course, you will be able to:</span></p>
<ul>
<li><span>Comprehend the Smart Grid and Smart Meters architecture</span></li>
<li><span>Review latest trends and challenges within the Smart Grid Technology</span></li>
<li><span>Perform analysis on smart electronic meters</span></li>
<li><span>Comply with regulatory and metering standards</span></li>
<li><span>Recognize the importance of cybersecurity in smart grids</span></li>
<li><span>Maximize efficiency, reliability, and longevity of your smart meters and equipment</span></li>
<li><span>Gain valuable insights into power quality and harmonics</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p><span>This course will greatly benefit the following groups but not limited to:</span></p>
<ul>
<li><span>Smart Grid managers and engineers</span></li>
<li><span>Smart Meters managers and engineers</span></li>
<li><span>Power plant managers</span></li>
<li><span>Outage managers</span></li>
<li><span>Maintenance and operations engineers</span></li>
<li><span>Power regulatory personnel</span></li>
<li><span>Transmission managers and engineers</span></li>
<li><span>Distribution managers and engineers</span></li>
<li><span>IT managers</span></li>
<li><span>Renewable energy managers and engineers</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.</span></p>
<p><em><span>Course Duration: 4 days in total (28 hours).</span></em></p>
<p><strong><span>Training Schedule</span></strong></p>
<p><span>0830 - Registration </span><span>0900 - Start of training </span><span>1030 - Morning Break </span><span>1045 - Training recommences </span><span>1230 - Lunch Break </span><span>1330 - Training recommences </span><span>1515 - Evening break </span><span>1530 - Training recommences </span><span>1700 - End of Training</span></p>
<p><span>The maximum number of participants allowed for this training course is 25.</span></p>
<p><span>This course is also available through our Virtual Instructor Led Training (VILT) format.</span></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><span>Your expert course leader is a professional engineer with extensive experience in power system studies, substation design field-testing, and EHS programs settings for Mining and Electrical Utilities sectors. He was formally the Engineering Manager at GE Canada in Ontario. He received his M.Sc. in electrical engineering from the University of New Brunswick and his MBA from Laurier School of Business in Waterloo.</span> <span>He has managed and executed more than 150 engineering projects on substation design EMF audits and power system studies and analyses, EMF audits and grounding audits, for major electrical utilities, mines, oil and gas, data centers, industrial and commercial facilities in Canada and the U.S. He is a certified professional engineer in the provinces of Ontario and Alberta.</span></p>
<p><span>He has various IEEE publications, has served as a technical reviewer for many IEEE journals in power systems and control systems, and is the chair of the Industry Application Chapter (IAS) for IEEE Toronto Section. He remains a very active member for the IEEE substation committee of IEEE Std. 81 ground testing (WGE6) and IEEE Std. 80 ground design (WGD7). A certified electrical safety trainer by GE Corporate and a Canadian Standard Association (CSA) committee member at the mining advisory panel for electrical safety, he also taught many technical courses all over Canada to industrial customers, electrical consultants as well as to electrical utilities customers.</span></p>
<p><span>Highlighted Projects:</span></p>
<ul>
<li><span>Various Power System Studies for 345/230 kV Stations - Nova Scotia Power (EMERA)</span></li>
<li><span>RF audits for Telecom tower and antennas - Cogeco/Rogers Mobile</span></li>
<li><span>Power System analysis - Powell Canada</span></li>
<li><span>Structural/Geotechnical Design and upgrades - Oakville Hydro</span></li>
<li><span>Underground Cables testing and sizing - Plan Group</span></li>
<li><span>Relay programming and design optimization - Cenovus Canada</span></li>
<li><span>Different Arc Flash Analysis and BESS Design - SNC Lavalin</span></li>
<li><span>Environmental site assessment (ESA) Phase I/II for multiple stations - Ontario</span></li>
<li><span>Electromagnetic compatibility (EMC) assessment for Toronto LRT expansion - MOSAIC</span></li>
<li><span>Battery energy storage system (BESS) installation at City of London - Siemens Canada</span></li>
<li><span>EMF audits for 500 kV Transmission Lines - Hydro One</span></li>
<li><span>EMF audits for 500 kV Transmission Lines - Hydro Quebec</span></li>
<li><span>AC interference for 138 kV line modeling and mitigations - HBMS Mine</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Smart Metering & Power Quality Analytics

<div>
</div>
<section>
<div>
<h2>About this Training</h2>
<p>The expanding human population and industrialisation are increasing the demand for energy worldwide. This has resulted in numerous challenges such as environmental pollution, reliable supply of fossil fuels, and increased demand of electricity supply, which must be overcome. To fulfil the energy demands and overcome these challenges, numerous projects and funds are involved in finding an adequate solution.</p>
<p>Transport accounts for around one-fifth of global carbon dioxide (CO2) emissions and road travel accounts for three-quarters of transport emissions. Most of this comes from passenger vehicles. Emission limits are increasingly stringent, and the fuel industry must change its approach to product formulation to meet the challenge.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will be able to:</p>
<ul>
<li>Get a clear overview of the different types of bio and alternative fuels</li>
<li>Understand how different bio and alternative fuels are produced</li>
<li>Have an overview of feedstock utilised for biofuels production</li>
<li>Realize how the biofuels production could be integrated in modern refinery</li>
<li>Understand how bio and alternative fuels function as single and blended fuels</li>
<li>Understand what impact bio and alternative fuels have on car engine</li>
<li>Get an overview of the environmental impact of bio and alternative fuels</li>
<li>Get the overview of regulation related to bio and alternative fuel</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The course is intended for individuals who are interested in or developing in the field of bio and alternative fuels. The following personnel will benefit from the knowledge shared in this course:</p>
<ul>
<li>Refinery Technical Personnel</li>
<li>Trading and blending personnel</li>
<li>Sales, marketing, and product trading personnel</li>
<li>Laboratory supervisors and technical personnel</li>
<li>Policymakers</li>
<li>Professionals who are interested in or developing in the field of bio and alternative fuels</li>
<li>Process, project, and consultant engineers involved in bioenergy, petrochemical and chemical industries</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is an experienced manager with more than 25 years of operational experience in the downstream Oil &amp; Gas industry. She is a recognised expert in conventional, biofuels and alternative fuels with extensive experience in the crude selection process and formulation of finished products including product portfolio strategy, product quality road mapping and benchmarking. She is a long-time laboratory manager with comprehensive experience in laboratory processes, including financing, benchmarking, efficiency improvement and total quality management processes. </p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Biofuels and Alternative Fuel Sources

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This is a 2 full-day course that is aimed at providing professionals in the Oil &amp; Gas business with a comprehensive set of core negotiating skills. Negotiations take place in many situations e.g. between peers, manager and subordinate, company and trade unions, company and government. The skills learnt on this course will be useful in all of these situations. However, this course puts a focus on the skills needed in commercial negotiations. A particular emphasis is placed on the relationship and negotiations typically carried out between client and contractor, vendor or the provider of services.</p>
<p>A mixture of theory, examples and practical exercises are used so that the participants understand the principles and get an opportunity to try them out. The case studies used are real cases encountered in the Oil &amp; Gas industry.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Many technical experts find it difficult to move out of their expertise areas and deal with commercial matters. Negotiating to optimise business value is a step further from their comfort zones. All too often negotiations are then left to finance personnel. They bring many strengths to the table but an understanding of engineering trade-offs is not one of them. By the end of this course, the participants will add to their technical know-how a core competence in negotiation skills. They will thus become formidable negotiating opponents.</p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>The course is intended for <strong>middle-managers and technical and other staff who are responsible for contracts, but with limited previous exposure to negotiations, and who will need these skills in the near future</strong>.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a consultant, manager and engineer with more than 30 years' experience in a broad range of positions. He spent 15 years with the Shell group and during this time, gained extensive negotiating experience with contractors, vendors, service agents, trade unions and purchasers of equipment and products.</p>
<p>Over the last 15 years, he has worked with a broad range of multinational businesses across the globe in a wide range of negotiation related roles including:</p>
<ul>
<li>Developing negotiating capability and skillsets</li>
<li>Advising on negotiation strategies</li>
<li>Establishing Alliances, Joint Ventures and Partnerships, &amp;</li>
<li>Remediating Alliances, Joint Ventures and Partnerships</li>
</ul>
<p>He has many years of teaching experience to technical staff - both in a corporate setting, and in an academic setting - for Melbourne University in Melbourne, Australia. Several thousand people from around the world have benefited from his courses. He brings an engineer's practical perspective, and can readily empathize with technical staff making forays into the commercial world of negotiations. He is joint author (with Professor Danny Samson) of Patterns of Excellence ISBN 0273638769, published by Financial Times Management. This has been adopted by a number of blue chip companies as the core text for management development.</p>
<p><strong>Corporate Experience:</strong></p>
<p>15 years with Shell in a broad range of international &amp; domestic technical and managerial and change management roles.</p>
<p><strong>Consulting Experience:</strong></p>
<ul>
<li>5 Years with McKinsey Consulting Group</li>
<li>4 Years with Melbourne Business Schoo</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Negotiation Skills and Techniques for Engineers and Technical Professionals

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will provide a comprehensive understanding of the design of circulating fluidized bed (CFB) boilers. The design of all CFB boiler components and equipment including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves will be covered in detail. All potential operating problems and major operating problems, corrective actions and maintenance required for CFB boilers will be covered thoroughly.</p>
<p>This course will focus on designing CFB boilers that have the highest efficiency, and maximum longevity and capacity factor. All the common problems encountered in CFB Boilers will be discussed in detail.This includes thermally induced failures, anchor system induced failures, water walls tube failures, NMEJ damages, clinker formation, refractory damages, APH tube chock-up, erosion and corrosion. The solutions to each of these problems will be presented. All repair and refurbishment methods, preventive and predictive maintenance required for CFB boilers will be covered in-depth.</p>
<p>Several studies have confirmed that CFB boilers are the best method for power generation.This is due to their fuel flexibility, and lowest electricity cost among all types of boilers. This technology is in great demand due to various other advantages such as lower emissions as compared to other types of boilers and has a carbon footprint well below the norms laid down by the World Bank emission requirements.</p>
<p>This course is a MUST for anyone who is involved in the design, operation or maintenance of circulating fluidized bed boilers, because it covers how these boilers are designed and provides guidelines and rules that ensure the CFB boilers have great performance. This course will also provide up-dated information in respect to the design of supercritical once-through CFB boilers and ultra supercritical CFB boilers.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><span><strong>Circulating Fluidized Bed Boiler Design:</strong> </span><span>Gain a thorough understanding of the best design methods of circulating fluidized bed boilers.</span></li>
<li><span><strong>Design of Circulating Fluidized Bed Boiler:</strong> Components and Systems</span><span>: Learn</span> <span>all the techniques used to design CFB boiler equipment and systems including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves.</span></li>
<li><strong><span>Design of Circulating Fluidized Bed Boiler to Achieve Highest Efficiency, and Best Performance and Economics</span></strong><span><strong>:</strong> Gain a thorough understanding of all the methods used to design CFB boilers having the highest efficiency, longevity and capacity factor as well as best economics.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Equipment:</span></strong><span> Learn about various equipment of circulating fluidized bed boilers including: furnaces, cyclones, economizers, superheaters, reheaters, ammonia injection systems, electrostatic precipitators, polishing dry scrubbers, fuel and sorbent feeding systems, bottom ash handling and extraction systems and materials.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Environmental Emissions:</span></strong><span> Learn about the monitoring and control of environmental emissions from circulating fluidized boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation and control systems of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Reliability and Testing:</span></strong><span> Increase your knowledge of predictive and preventive maintenance, reliability and testing of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Selection and Applications: </span></strong><span>Gain a detailed understanding of the selection considerations and applications of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Maintenance:</span></strong><span> Learn all the maintenance activities required for circulating fluidized bed boilers, to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Refurbishment, and Life Extension Methods: </span></strong><span>Learn about life cycle cost, profitability, refurbishment, and life extension methods for all types of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Commissioning: </span></strong><span>Understand all the commissioning requirements of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Codes and Standards: </span></strong><span>Learn all the codes and standards applicable for circulating fluidized bed boilers.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Design of Circulating Fluidized Bed Boiler manual (600 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Design Of Circulating Fluidized Bed Boilers

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans. This course provides also a comprehensive explanation of all boiler combustion control systems including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system as well as their tuning methods. All boiler control systems are covered as well in this course including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, boiler-turbine coordinated control, etc.</p>
<p>The course provides also detailed explanation of Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code). The burner management systems (BMS) and examples of boiler permissive starting logic and protective tripping logic will be explained thoroughly. The various methods used to calculate the boiler efficiency are covered in detail in this course including the direct and indirect methods. All the factors which affect the efficiency and emissions of pulverized coal boiler and CFB boiler will be explained thoroughly.</p>
<p>The course covers also all the methods used to improve the efficiency of pulverized coal boilers and CFB boilers including improvement to their combustion efficiency and control systems performance.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Boiler Combustion Equipment and Systems:</span></strong><span> Gain an in-depth understanding of all boiler combustion equipment and systems including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans</span></li>
<li><strong><span>Boiler Combustion Control Systems:</span></strong><span> Gain a thorough understanding of all boiler combustion control systems for pulverized coal boilers, and CFB boilers including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system</span></li>
<li><strong><span>Boiler Conventional Control Systems:</span></strong><span> Gain an in-depth understanding of all boiler conventional control systems including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, and boiler-turbine coordinated control</span></li>
<li><strong><span>Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code):</span></strong><span> Learn about NFPA 85 code and ANSI/ISA-77-44-01-2007 code</span></li>
<li><strong><span>Burner Management System and Boiler Permissive Starting Logic and Protective Tripping Logic:</span></strong><span> Gain an in-depth understanding of burner management system and boiler permissive starting logic and protective tripping logic</span></li>
<li><strong><span>Boiler Efficiency Calculations:</span><span> Learn how to calculate the boiler efficiency using the direct and indirect methods</span></strong></li>
<li><strong><span>Factors Affecting the Efficiency and Emissions of Boilers: </span></strong><span>Understand all the factors which affect the boiler efficiency and emissions</span></li>
<li><strong><span>Methods Used to Improve the Efficiency of Boilers:</span></strong><span> Learn about all the methods used to improve the efficiency of pulverized coal boilers, and CFB boilers including improvement to their combustion efficiency and control systems performance</span></li>
<li><strong><span>Boiler Instrument and Piping Diagrams:</span></strong><span> Gain an in-depth understanding of all boiler instrument and piping diagrams</span></li>
<li><strong><span>CFB and Pulverized Coal Boilers Equipment and Systems:</span></strong><span> Learn about various types of equipment and systems used in CFB and pulverized coal boilers including economizers, steam drum, superheaters, air preheaters, ammonia injection systems, etc.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>COMBUSTION ENGINEERING FOR COAL FIRED POWER PLANTS MANUAL (includes practical information about combustion engineering for coal fired power plants - 550 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Combustion Engineering for Coal Fired Power Plants

<p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(var(--color_25));">This official BRCGS course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of auditors auditing against Global Food Safety Initiative (GFSI) recognised certification programmes.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors with audit against the Standard. &nbsp;Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days&#39; duration.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the <a href="https://www.brcgs.com/store/" target="_blank" rel="noreferrer noopener" style="color: inherit; -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Store</a>, in addition to the pre-course materials provided.&nbsp;</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course you will be assessed with an exam. Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.</p><p style="color: rgb(77, 77, 79); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(77, 77, 79);"><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">This course is part of the</span><a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">.</span></p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course participants will be able to:&nbsp;</p><ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Explain the steps to managing an audit programme</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe auditing fundamentals and techniques</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe the scope of companies and products covered by the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Utilise and explain resource tools available for compliance and beneficial support from BRCGS</p></li></ul>

This official BRCGS course enables participants with an in-depth understanding of the Standard in terms of the protocol, requirements and how to audit effectively. Participants will gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit. Auditing fundamentals and techniques will be discussed including the auditor competency skills required of auditors auditing against Global Food Safety Initiative (GFSI) recognised certification programmes.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors with audit against the Standard. Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days' duration.
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided. 
At the end of the course you will be assessed with an exam. Successful completion of this course, including the exam, forms part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Explain the steps to managing an audit programme
Describe auditing fundamentals and techniques
Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity
Describe the scope of companies and products covered by the Standard
Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit
Utilise and explain resource tools available for compliance and beneficial support from BRCGS

Ask Sonia Limited

Food Safety

HACCP

Official BRCGS Food Safety Issue 9 Lead Auditor training course. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner & Virtual Trainer.
Exam and Certificate fee included in the price.

BRCGS Food Safety Issue 9 - Lead Auditor (5 Days)

General Admission

<p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(var(--color_25));">This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard. It is designed to equip delegates with the knowledge of how to successfully implement the requirements of the Standard on site. Participants will discuss activities which develop a culture to maintain compliance and learn what to expect during the process of certification, including actions needed prior to, during and after the audit.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how sites will implement the Standard.&nbsp;</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the <a href="https://www.brcgs.com/store/" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Store</a>, in addition to the pre-course materials provided. It is advised participants must have working knowledge of HACCP.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course, participants will be assessed with an exam.&nbsp;</p><p style="color: rgb(77, 77, 79); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(77, 77, 79);"><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">This course is part of the</span><a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">.</span></p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course participants will be able to:&nbsp;</p><ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Explain what is required to comply with the requirements of the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe the scope of companies and products covered by the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe what to expect from your BRCGS audit&nbsp;</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Prepare for an audit to the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Apply resource tools available for compliance and support from BRCGS</p><br fr-original-style="" style="box-sizing: border-box;"></li></ul>

This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard. It is designed to equip delegates with the knowledge of how to successfully implement the requirements of the Standard on site. Participants will discuss activities which develop a culture to maintain compliance and learn what to expect during the process of certification, including actions needed prior to, during and after the audit.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how sites will implement the Standard. 
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided. It is advised participants must have working knowledge of HACCP.
At the end of the course, participants will be assessed with an exam. 
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Explain what is required to comply with the requirements of the Standard
Describe the scope of companies and products covered by the Standard
Describe what to expect from your BRCGS audit
Prepare for an audit to the Standard
Apply resource tools available for compliance and support from BRCGS

Official BRCGS Food Safety Issue 9 course. 
Delivered online (Zoom) by a live BRCGS Approved Training Partner.
Exam and Certificate fee included in the price.

BRCGS Food Safety Issue 9 - For Sites (2 Days)

<p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(var(--color_25));">This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard and gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors will audit against the Standard. &nbsp;Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days&#39; duration.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided.</p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course, participants will be assessed with an exam. For candidates who are already qualified as a Lead Auditor on another scheme (eg IRCA, SQF, IFS, etc) successful completion of this course, including the exam, is recognised as part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.</p><p style="color: rgb(77, 77, 79); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(77, 77, 79);"><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">This course is part of the</span><a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" style="color: rgb(234, 118, 0); -webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(234, 118, 0);">&nbsp;BRCGS Professional recognition programme</a><span style="color: rgb(77, 77, 79); box-sizing: border-box;" fr-original-style=" color: rgb(77, 77, 79);">.</span></p><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">At the end of the course participants will be able to:&nbsp;</p><ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe the scope of companies and products covered by the Standard</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit</p></li><li fr-original-style="" style="box-sizing: border-box;"><p style="color: rgb(var(--color_25)); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));">Utilise and explain resource tools available for compliance and beneficial support from BRCGS</p></li></ul>

This official BRCGS course enables participants to develop a full understanding of the general principles of the requirements of the Standard and gain competency to assess compliance to the requirements of the Standard, including fundamental clauses, statements of intent, how to undertake a BRCGS audit, planning of the audit and reporting of the audit.
Active learning will be used throughout the course utilising case study-based activities to encourage critical thinking and help explain how auditors will audit against the Standard. Participants must have a working knowledge of quality management systems and auditing within the relevant manufacturing sector, and have completed a hazard analysis and critical control points (HACCP) course of at least two days' duration.
In preparation for the course, participants must read and review a copy of the Standard including the glossary, which is available as a free download from the BRCGS Store, in addition to the pre-course materials provided.
At the end of the course, participants will be assessed with an exam. For candidates who are already qualified as a Lead Auditor on another scheme (eg IRCA, SQF, IFS, etc) successful completion of this course, including the exam, is recognised as part of the training necessary to become a BRCGS auditor. The steps necessary to complete your training must be arranged with a BRCGS-approved certification body.
This course is part of theBRCGS Professional recognition programme.
At the end of the course participants will be able to: 
Assess compliance to the requirements of the Standard and explain how compliance can be demonstrated to maintain food safety, quality, legality, and authenticity
Describe the scope of companies and products covered by the Standard
Describe steps to conduct a BRCGS audit including the preparation, planning, and reporting of the audit
Utilise and explain resource tools available for compliance and beneficial support from BRCGS

Auditor

BRCGS Food Safety Issue 9 - For Auditors (3 Days)

<h1 id="isPasted" style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Online MHFA England Adult Mental Health First Aid Course.&nbsp;</h1><div fr-original-style="" style="box-sizing: border-box;"><a href="https://www.mindmapswellbeing.com/brochure-request/" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Download brochure for course details here.</a><a href="https://www.mindmapswellbeing.com/_webedit/uploaded-files/All%20Files/Online%20Mental%20Health%20First%20Aid.pdf" rel="noopener noreferrer" target="_blank" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">&nbsp;</a>&nbsp;</div><div fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">This online version of the mental health first aid course will offer the same learning outcomes as the face to face training, and every person who completes the course will be certified as a Mental Health First Aider. &nbsp;The Online Mental Health First Aid course is a blended approach of individual learning and four instructor-led live sessions, hosted on a new Online Learning Hub. &nbsp;As a training course, Mental Health First Aid teaches people how to identify, understand and help someone who may be experiencing a mental health issue. The organisation&#39;s courses and resources also promote self-care as a vital way for people to help protect their mental health and prevent issues from getting worse. &nbsp;As with all our courses at Mindmaps Wellbeing, your course will be delivered by a Registered Mental Health Nurse, MHFA England Instructor and Open University Associate Lecturer and Practice Tutor experienced in remote teaching. Our live online learning will also include an assistant who is a MHFAider. &nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Our fee is &pound;300pp Groups of 5+ contact <a href="mailto:info@mindmapswellbeing.com" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">info@mindmapswellbeing.com</a>&nbsp;for reduced group fees.&nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Live instructor led sessions;&nbsp;</strong></div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">10:00 &ndash; 12:30 &amp; 14:30 &ndash; 17:00 both days&nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Individual learning modules around these times. You will gain access to this on the Friday before your course start date.</div><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><u fr-original-style="" style="box-sizing: border-box;">Why choosing Mindmaps Wellbeing is a good choice for your training.</u></strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The MHFA England RRP is &pound;325pp, our rate is &pound;300pp and our fee includes:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Instructor led training sessions over two days</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Course Manual</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Workbook</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Handy Cue Card</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ MHFAider Certificate upon completion</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Plus, exclusively when you choose Mindmaps Wellbeing, it also includes:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Your instructors are <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Registered Mental Health Nurses and Healthcare Educators</strong> (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Access to our online MHFAider peer support groups moderated by the instructor team.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Advanced Delegate Plan &ndash; This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">For a little extra:&nbsp;</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Quarterly Facilitated MHFAider Forum &ndash; to provide ongoing expert support and guidance.&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Organisational MINDWELL Companion tailored for your workplace / organisation.</p>

Online MHFA England Adult Mental Health First Aid Course. 
Download brochure for course details here.  This online version of the mental health first aid course will offer the same learning outcomes as the face to face training, and every person who completes the course will be certified as a Mental Health First Aider. The Online Mental Health First Aid course is a blended approach of individual learning and four instructor-led live sessions, hosted on a new Online Learning Hub. As a training course, Mental Health First Aid teaches people how to identify, understand and help someone who may be experiencing a mental health issue. The organisation's courses and resources also promote self-care as a vital way for people to help protect their mental health and prevent issues from getting worse. As with all our courses at Mindmaps Wellbeing, your course will be delivered by a Registered Mental Health Nurse, MHFA England Instructor and Open University Associate Lecturer and Practice Tutor experienced in remote teaching. Our live online learning will also include an assistant who is a MHFAider. Our fee is £300pp Groups of 5+ contact info@mindmapswellbeing.com for reduced group fees. Live instructor led sessions; 10:00 – 12:30 & 14:30 – 17:00 both days Individual learning modules around these times. You will gain access to this on the Friday before your course start date.
Why choosing Mindmaps Wellbeing is a good choice for your training.
The MHFA England RRP is £325pp, our rate is £300pp and our fee includes:
✅ Instructor led training sessions over two days
✅ Course Manual
✅ Workbook
✅ Handy Cue Card
✅ MHFAider Certificate upon completion
Plus, exclusively when you choose Mindmaps Wellbeing, it also includes:
✅ Your instructors are Registered Mental Health Nurses and Healthcare Educators (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).
✅ Access to our online MHFAider peer support groups moderated by the instructor team.
✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.
✅ Advanced Delegate Plan – This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.
 
For a little extra: 
✅ Quarterly Facilitated MHFAider Forum – to provide ongoing expert support and guidance. 
✅ Organisational MINDWELL Companion tailored for your workplace / organisation.

Mindmaps Wellbeing

Health & Wellbeing

Occupational Health & Wellbeing

Mental Health

Accredited Mental Health First Aid

Mental Health At Work

Mental Health Nurse

Online MHFA England mental health first aid course delivered by Registered Mental Health Nurses from Mindmaps Wellbeing. 

Why choosing Mindmaps Wellbeing is a good choice for your mental health training.
The MHFA England RRP is £325pp, our rate is £300pp and our fee includes:
✅ Instructor led training sessions over two days 
✅ Course Manual
✅ Workbook
✅ Handy Cue Card
✅ MHFAider Certificate upon completion
Plus, exclusively when you choose Mindmaps Wellbeing, it also includes:

✅ Your instructors are Registered Mental Health Nurses and Healthcare Educators (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).

✅ Access to our online MHFAider peer support groups moderated by the instructor team.

✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.

✅ Advanced Delegate Plan – This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.

For a little extra: 

✅ Quarterly Facilitated MHFAider Forum – to provide ongoing expert support and guidance. 

✅ Organisational MINDWELL Companion tailored for your workplace / organisation.


MHFA England Mental Health First Aid

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" id="isPasted" fr-original-style="font-size: 16px;">Who should attend?<br fr-original-style="" style="box-sizing: border-box;"></span></strong>DSLs, DDSLs, Senior Leaders, Governors, IT Leads &amp; Pastoral Leads.<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></strong></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Overview</strong><br fr-original-style="" style="box-sizing: border-box;"></span></p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">In this masterclass we&#39;ll unravel the complexities of the online world, shedding light on the most pressing current and emerging risks and opportunities faced by children and young people, from the perspective of the DSL, as Online Safety Lead.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The masterclass is based on the most current and up-to-date research and not only covers all the key statutory updates you will need, but is also full of ideas, good practice recommendations and signposting to resources to give you the confidence that you have everything in place in your setting.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">During this masterclass we will update DSLs, DDSLs and all those who have an interest in the Leadership of Online Safety Provision in Schools and Colleges, with regard to the latest developments and emerging trends in online risk and online safety. The aim is to ensure you are fully up to date in this ever evolving and rapidly changing field, and are confident in taking the lead responsibility for online safety in your setting.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><br fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Learning Objectives</strong><br fr-original-style="" style="box-sizing: border-box;"></span></p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This Masterclass will enable you to:</p><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Understand emerging risks and opportunities in the ever evolving online world, including insights into the dynamic nature of the digital realm and its increasing influence on children&#39;s daily lives.</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Ensure you are fully up to date with developments and emerging risks in this rapidly changing field whilst meeting your statutory requirement for an annual update.</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Be confident in taking the lead responsibility for online safety when safeguarding and protecting the children and young people in your care (including understanding the DfE&rsquo;s filtering and monitoring requirements).</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Recognise the impact on mental health and wellbeing, exploring the changing risks associated with prolonged online engagement on the wellbeing of children and young people.</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Learn proactive strategies to respond to online developments, ensuring effective protection and support for children as they explore the exciting digital landscape.</li></ul><p style="text-align: center; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="text-align: center;"><a href="https://www.brightcoreconsultancy.com/brightcore-testimonials" target="_blank" style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: rgb(255, 255, 255); font-weight: bold; text-decoration: none; border-radius: 5px; background-color: rgb(61, 86, 224); border-width: 12px 18px; border-style: solid; border-color: rgb(61, 86, 224); display: inline-block; user-select: auto; box-sizing: border-box; cursor: pointer;" rel="noopener noreferrer" fr-original-style="font-size: 14px; font-family: Helvetica, Arial, sans-serif; color: #ffffff; font-weight: bold; text-decoration: none; border-radius: 5px; background-color: #3D56E0; border-top: 12px solid #3D56E0; border-bottom: 12px solid #3D56E0; border-right: 18px solid #3D56E0; border-left: 18px solid #3D56E0; display: inline-block;">View all testimonials </a></p>

Who should attend?
DSLs, DDSLs, Senior Leaders, Governors, IT Leads & Pastoral Leads.

Overview

In this masterclass we'll unravel the complexities of the online world, shedding light on the most pressing current and emerging risks and opportunities faced by children and young people, from the perspective of the DSL, as Online Safety Lead.
The masterclass is based on the most current and up-to-date research and not only covers all the key statutory updates you will need, but is also full of ideas, good practice recommendations and signposting to resources to give you the confidence that you have everything in place in your setting.
During this masterclass we will update DSLs, DDSLs and all those who have an interest in the Leadership of Online Safety Provision in Schools and Colleges, with regard to the latest developments and emerging trends in online risk and online safety. The aim is to ensure you are fully up to date in this ever evolving and rapidly changing field, and are confident in taking the lead responsibility for online safety in your setting.

Learning Objectives

This Masterclass will enable you to:
Understand emerging risks and opportunities in the ever evolving online world, including insights into the dynamic nature of the digital realm and its increasing influence on children's daily lives.
Ensure you are fully up to date with developments and emerging risks in this rapidly changing field whilst meeting your statutory requirement for an annual update.
Be confident in taking the lead responsibility for online safety when safeguarding and protecting the children and young people in your care (including understanding the DfE’s filtering and monitoring requirements).
Recognise the impact on mental health and wellbeing, exploring the changing risks associated with prolonged online engagement on the wellbeing of children and young people.
Learn proactive strategies to respond to online developments, ensuring effective protection and support for children as they explore the exciting digital landscape.
View all testimonials

Brightcore Consultancy

Child Safeguarding

Safeguarding

In this masterclass we'll unravel the complexities of the online world, shedding light on the most pressing current and emerging risks and opportunities faced by children and young people, from the perspective of the DSL, as Online Safety Lead.

Annual Online Safety Update for DSLs, including emerging risks and trends

For new users and the curious.
IMPORTANT: Once you are signed up, send us your requests on what you would like to see within the demonstration and learn on the course. We will then cater for your needs and answer them during the session.
This is designed to be an introduction into how to start a room by room survey using the Heat Engineer app, then sending this survey to the online dashboard. We will then go through the different steps to complete this heat loss report. Optional pages will also be worked through and shown. 
Examples of how to select the flow temperature and the heat source (heat pumps and boilers) will be presented once the heat loss result is completed. 
Scope of works
Estimated Start Time	Duration mins	Topic	Platform / Device
7:00:00 PM	5	Welcome introduction - Show an example Heat loss report from online - The end result	Website
7:05:00 PM	2	How to sign up and the different account types 5 mins	Website
7:07:00 PM	4	What the app is used for and sending to the online account – Show about page	Website & app
7:11:00 PM	2	Login into the app (Example used is an iPhone 14) – what is My Info and the History	App (mobile & tablets)
7:13:00 PM	3	Briefly show the estimator tool	App (mobile & tablets)
7:16:00 PM	2	How to start a new room by room survey	App (mobile & tablets)
7:18:00 PM	10	Open up example from History and enter two rooms - One standard and one vaulted. PowerPoint to help visualise	App (mobile & tablets)
7:28:00 PM	1	Send survey to main dashboard	App (mobile & tablets)
7:29:00 PM	3	Quick Intro to dashboard.	Website
7:32:00 PM	1	Show profile setup	Website
7:33:00 PM	7	Open sent survey go through step 1 to step 8	Website
7:40:00 PM	2	Selecting a heat source - Heat Pump in this example	Website
7:42:00 PM	15	Optional pages overview, emitters and performance, current radiators, new radiators, DHW, Bivalent system and fuel comparison page.	Website
7:57:00 PM	2	Print report off or send copy to a supplier	Website
7:59:00 PM	5	Adding Designers	
8:04:00 PM	1	Our future plans	Website
8:05:00 PM	15	Heat Manager - Digital file system for you and your customers	Website
8:20:00 PM	Any feedback and further questions please email to support@heat-engineer.com		
Questions - You will be able to ask further questions after the event.
Delivered by Rich Cartwright BEng DipEd MCIPHE
NEW RADIATORS
We use EN442 standard to enable you to customise the defined MWT (°c) and the results will highlight if the radiator will heat the room for a given internal design temperature. We like to promote the need to design low temperature systems!
Add multiple designers to your account
You can now add extra dashboard users to complete heat loss and heating design reports on your Heat Engineer Software account.
DHW (DOMESTIC HOT WATER)
This will calculate the projected energy demand and running costs for DHW and domestic cylinder sizing.
EMITTERS AND PERFORMANCE
This page is primarily used for heat pump designs. Once you specify the flow temperature for each room the SCOP (Seasonal Coefficient of Performance) values will be shown, and the system will show if radiators are over or undersized.
CURRENT RADIATORS
Use the app on site to enter the current radiators and our system will display the output values for different flow temperatures.
FUEL COMPARISON
Multiple fuels to compare against, you can adjust the price per unit and CO2 factor (kg/kWh). Present these running costs to your clients.
PHOTOS AND NOTES
Photos and notes which you or your surveyors have taken will be shown when you open the report from your dashboard. You may also upload and download photos from your PC / laptop too.
 

Heat Engineer

Heating Engineer

For new users and the curious.

Hello,

For new users and the curious.

IMPORTANT: Firstly, once you are signed up, send us your requests on what you would like to see within the demonstration and learn on the course. We will then cater for your needs and answer them during the session.

This is designed to be an introduction into how to start a room by room survey using the Heat Engineer app, then sending this survey to the online dashboard. We will then go through the different steps to complete this heat loss report. Optional pages will also be worked through and shown. 

Examples of how to select the flow temperature and the heat source (heat pumps and boilers) will be presented once the heat loss result is completed. 

How to use Heat Engineer Software V2 (Selectable dates)

General admission

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The professional working world has changed more rapidly than could have been envisaged at the time of the introduction of GDPR and the Data Protection Act 2018. With more people working from home post-Covid and the ever increasing risk of cyber-attacks, this short course is aimed at taking stock of current practice and risk, as well as considering ICO enforcement action and the implications of hybrid working. &nbsp;It is also a great recap on the rules as they stand and what you need to know to comply. &nbsp;The course will cover:</p><ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">UK GDPR - A timely reminder of the rules</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">ICO enforcement action and what we can learn</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Data Protection Impact Assessments - when and how to do them</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Hybrid working and UK GDPR</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Managing cyber attacks from a UK GDPR perspective</li></ul><h2 data-key="21" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><span data-key="22" fr-original-style="" style="box-sizing: border-box;"><span data-offset-key="22:0" fr-original-style="" style="box-sizing: border-box;">Target Audience</span></span></h2><p data-key="23" data-slate-fragment="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" style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><span data-key="24" fr-original-style="" style="box-sizing: border-box;"><span data-offset-key="24:0" fr-original-style="" style="box-sizing: border-box;">The online course is suitable for staff of all levels, from support staff to senior partners.</span></span></p><h2 style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">Resources</h2><p data-key="28" style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><span data-key="29" fr-original-style="" style="box-sizing: border-box;"><span data-offset-key="29:0" fr-original-style="" style="box-sizing: border-box;">Course notes will be provided to all delegates which may be useful for ongoing reference or cascade training.</span></span></p><p data-key="30" data-slate-fragment="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" style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><span data-key="31" fr-original-style="" style="box-sizing: border-box;"><span data-offset-key="31:0" fr-original-style="" style="box-sizing: border-box;">Please note a recording of the course will&nbsp;</span><span data-offset-key="31:1" fr-original-style="" style="box-sizing: border-box;"><strong data-slate-leaf="true" fr-original-style="" style="font-weight: 700; box-sizing: border-box;">not&nbsp;</strong></span><span data-offset-key="31:2" fr-original-style="" style="box-sizing: border-box;">be made available.</span></span></p><h2 data-key="35" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><span data-key="36" fr-original-style="" style="box-sizing: border-box;"><span data-offset-key="36:0" fr-original-style="" style="box-sizing: border-box;">Speaker</span></span></h2><h3 data-key="37" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><a href="http://dglegal.co.uk/the-team/matthew-howgate/" style="color: rgb(0, 140, 165); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 140, 165);"><span style="color: rgb(0, 180, 205); box-sizing: border-box;" fr-original-style="color: rgb(0, 180, 205);">Matthew Howgate, Consultant, DG Legal</span></a></h3><p data-key="39" style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);">Matt is a non-practising solicitor who has considerable experience in regulatory issues and advising on complex issues of compliance and ethics. He is also an expert in data protection, UK GDPR and on the civil legal aid scheme.</span></p><p data-key="39" style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0);"><span style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(0, 0, 0);">Matthew is a lead trainer on and co-developed the LAPG Certificate in Practice Management (a training programme for legal managers and law firm owners) as well as regularly providing training on legal aid Supervision, costs maximisation, data protection and security and on general SRA compliance. &nbsp;</span></span></p>

The professional working world has changed more rapidly than could have been envisaged at the time of the introduction of GDPR and the Data Protection Act 2018. With more people working from home post-Covid and the ever increasing risk of cyber-attacks, this short course is aimed at taking stock of current practice and risk, as well as considering ICO enforcement action and the implications of hybrid working. It is also a great recap on the rules as they stand and what you need to know to comply. The course will cover:
UK GDPR - A timely reminder of the rules
ICO enforcement action and what we can learn
Data Protection Impact Assessments - when and how to do them
Hybrid working and UK GDPR
Managing cyber attacks from a UK GDPR perspective
Target Audience
The online course is suitable for staff of all levels, from support staff to senior partners.
Resources
Course notes will be provided to all delegates which may be useful for ongoing reference or cascade training.
Please note a recording of the course will not be made available.
Speaker
Matthew Howgate, Consultant, DG Legal
Matt is a non-practising solicitor who has considerable experience in regulatory issues and advising on complex issues of compliance and ethics. He is also an expert in data protection, UK GDPR and on the civil legal aid scheme.
Matthew is a lead trainer on and co-developed the LAPG Certificate in Practice Management (a training programme for legal managers and law firm owners) as well as regularly providing training on legal aid Supervision, costs maximisation, data protection and security and on general SRA compliance. 

DG Legal

Data Protection

Cyber Security

GDPR

Data Protection & Cyber Security: Remaining Compliant Against Today's Risks

General Delegate

A discount is available for delegates attending from firms with a current retainer contract with DG Legal (please contact us by email to admin@dglegal.co.uk for confirmation of eligibility).   If you choose this option and are not eligible, you are still bound to pay the full rate and will be invoiced accordingly.

Retainer Delegate

Join Ann Wise, the Historic Church Buildings Support Officer, for a drop-in session to discuss planning for an emergency.

The Diocese of St Albans

Emergency planning - drop-in session

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>The primary audience for this course is Enterprise Desktop Support Technicians (EDSTs). These technicians provide Tier 2 support to users with domain-joined computers running the Windows 11 OS, typically in medium to large enterprise organizations.</p>Overview<p>Important Windows 11 features    How these features are used in an Active Directory    How to troubleshoot these features</p><p>This is a 5-day ILT course that is designed to provide you with the knowledge and skills required to support and troubleshoot Windows 11 PCs and devices in an on-premises Windows Server Active Directory domain environment.</p></div><div id="course-pills-2"><h3>1: Introducing Windows 11</h3> <ul> <li> Overview of Windows 11</li>  <li> Recommendations for typical troubleshooting procedures</li>  <li>Troubleshooting installation and deployment</li>  <li> Introduction to management and troubleshooting tools</li> </ul>  <h3>2: Administering Windows 11 remotely</h3> <ul> <li> Using Windows Admin Center</li>  <li>Using Windows PowerShell</li>  <li> Implementing Remote Management</li> </ul>  <h3>3: Troubleshooting startup and performing system recovery</h3> <ul> <li> Recovering Windows 11</li>  <li> Configuring the Registry</li>  <li>Troubleshooting Windows 11 startup</li>  <li> Implementing and troubleshooting BitLocker</li>  <li> Troubleshooting OS service Issues</li> </ul>  <h3>4: Troubleshooting devices and device drivers</h3> <ul> <li> Overview of hardware troubleshooting</li>  <li>Troubleshooting device drivers</li> </ul>  <h3>5: Configuring and troubleshooting network connectivity</h3> <ul> <li> Configuring network connectivity</li>  <li> Troubleshooting network connectivity</li>  <li> Implementing and troubleshooting name resolution</li>  <li> Implementing and troubleshooting remote access</li> </ul>  <h3>6: Troubleshooting Group Policy</h3> <ul> <li>Overview of Group Policy</li>  <li> Resolve GPO application issues on client devices</li> </ul>  <h3>7: Configuring and Troubleshooting Security Settings</h3> <ul> <li> Implementing network security</li>  <li> Implementing Windows 11 security features</li>  <li> Configuring and troubleshooting user accounts</li> </ul>  <h3>8: Configuring and Troubleshooting User State</h3> <ul> <li> Implementing and troubleshooting user state</li>  <li> Implementing and troubleshooting Folder Redirection</li> </ul>  <h3>9: Configuring and Troubleshooting Resource Access</h3> <ul> <li> Configuring and troubleshooting file access.</li>  <li> Configuring and troubleshooting shared folders.</li>  <li> Implementing and troubleshooting Work Folders.</li>  <li>Managing and troubleshooting printers.</li>  <li>Recovering files.</li> </ul>  <h3>10: Troubleshooting apps</h3> <ul> <li> Troubleshooting desktop apps</li>  <li> Troubleshooting app compatibility</li>  <li> Managing UWP apps</li> </ul>  <h3>11: Monitoring and Maintaining Windows 11</h3> <ul> <li> Monitoring Windows 11</li>  <li>Optimizing Windows 11 performance</li>  <li> Managing Windows 11 updates</li> </ul></div>

Nexus Human

IT Technician

IT Support

Microsoft Certification

IT Certifications

Computer Maintenance

Microsoft AZ-303

55342 Supporting and Troubleshooting Windows 11

<div id="course-pills-1">Duration<p>5 Days</p><p>30 CPD hours</p>This course is intended for<p>This course is designed for anyone seeking CCNA certification. The course also provides foundational knowledge for all support technicians involved in the basic installation, operation, and verification of Cisco networks. The job roles best suited to the material in this course are:<br />Entry-level network engineer<br />Network administrator<br />Network support technician<br />Help desk technician</p>Overview<p>This course will help you:<br />Learn the knowledge and skills to install, configure, and operate a small- to medium-sized network<br />Gain a foundation in the essentials of networking, security, and automation<br />Earn 30 CE credits toward recertification</p><p>The Implementing and Administering Cisco Solutions (CCNA) v2.0 course gives you a broad range of fundamental knowledge for all IT careers. Through a combination of lecture, hands-on labs, and self-study, you will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. This course helps you prepare to take the 200-301 CiscoÂ© Certified Network Associate (CCNAÂ©) exam. By passing this one exam, you earn the CCNA certification. This course also earns you 30 Continuing Education (CE) credits towards recertification.</p></div><div id="course-pills-2"><h4>Course Outline </h4><ul><li>Exploring the Functions of Networking ? Lecture</li><li>Introducing the Host-to-Host Communications Model ? Lecture</li><li>Operating Cisco IOS Software ? Lecture</li><li>Introducing LANs ? Lecture</li><li>Exploring the TCP/IP Link Layer ? Lecture</li><li>Starting a Switch ? Lecture</li><li>Introducing the TCP/IP Internet Layer, IPv4 Addressing, and Subnets ? Lecture</li><li>Explaining the TCP/IP Transport Layer and Application Layer ? Lecture</li><li>Exploring the Functions of Routing ? Lecture</li><li>Configuring a Cisco Router ? Lecture</li><li>Exploring the Packet Delivery Process ? Lecture</li><li>Troubleshooting a Simple Network ? Lecture</li><li>Introducing Basic IPv6 ? Lecture</li><li>Configuring Static Routing ? Lecture</li><li>Implementing VLANs and Trunks ? Lecture</li><li>Routing Between VLANs ? Lecture</li><li>Introducing OSPF ? Lecture</li><li>Building Redundant Switched Topologies ? Self-study</li><li>Improving Redundant Switched Topologies with EtherChannel ? Lecture</li><li>Exploring Layer 3 Redundancy ? Self-study</li><li>Introducing WAN Technologies ? Self-study</li><li>Explaining Basics of ACL ? Lecture</li><li>Enabling Internet Connectivity ? Lecture</li><li>Introducing QoS ? Self-study</li><li>Explaining Wireless Fundamentals ? Self-study</li><li>Introducing Architectures and Virtualization ? Self-study</li><li>Explaining the Evolution of Intelligent Networks ? Lecture</li><li>Introducing System Monitoring ? Lecture</li><li>Managing Cisco Devices ? Lecture</li><li>Examining the Security Threat Landscape ? Self-study</li></ul></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Cisco Implementing and Administering Cisco Solutions v2.0 (CCNA) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Cisco Implementing and Administering Cisco Solutions v2.0 (CCNA) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

882 Courses in Bradford

Steam Turbine Technology

By EnergyEdge - Training for a Sustainable Energy Future

Electrical Generators, Excitation Systems and Governing Systems

By EnergyEdge - Training for a Sustainable Energy Future

FPSO Operations Management & Safety

By EnergyEdge - Training for a Sustainable Energy Future

Process Control and Instrumentation

By EnergyEdge - Training for a Sustainable Energy Future

Advanced Reservoir Engineering

By EnergyEdge - Training for a Sustainable Energy Future

Smart Metering & Power Quality Analytics

By EnergyEdge - Training for a Sustainable Energy Future

Biofuels and Alternative Fuel Sources

By EnergyEdge - Training for a Sustainable Energy Future

Negotiation Skills and Techniques for Engineers and Technical Professionals

By EnergyEdge - Training for a Sustainable Energy Future

Design Of Circulating Fluidized Bed Boilers

By EnergyEdge - Training for a Sustainable Energy Future

Combustion Engineering for Coal Fired Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location