Name: Heat Rate Optimization of Coal Power Plants
Price: 1324 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p><span>The objective of this 4-half-day Virtual Instructor Led Training (VILT) course is to equip participants with the required knowledge so that they can define and implement an effective oil analysis programme, monitor the condition of transformers and understand oil analysis reports as part of their maintenance strategy.</span></p>
<p><span>This VILT course is delivered in partnership with ENGIE Laborelec.</span></p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><span>Participants will be able to go through the following areas during the VILT course:</span></p>
<p><strong><span>Condition monitoring of power transformers through oil analyses:</span></strong></p>
<ul>
<li><span>Transformer Health Index, Transformer Fleet Condition Assessment, Risk Matrix</span></li>
<li><span>Best practices</span></li>
<li><span>Which oil analyses/how frequent</span></li>
<li><span>DGA: focus on partial discharges, sparking, stray gassing, catalytic effects / interpretation systems.</span></li>
<li><span>Interpretation of results</span></li>
<li><span>Why and when to perform electrical measurements?</span></li>
<li><span>International standards: IEEE, IEC, Duval, ASTM, etc</span></li>
<li><span>Maintenance guidelines</span></li>
<li><span>Trending and reporting</span></li>
<li><span>Sampling techniques</span></li>
</ul>
<p><strong><span>Use of online monitoring for DGA/water: implementation and real-case advantages etc:</span></strong></p>
<ul>
<li><span>New developments: importance of methanol as ageing marker, temperature correction of ageing markers, stray gassing of oils in service etc</span></li>
<li><span>REX, case studies and real-case exercises concerning power transformers within generation and high-voltage grids</span></li>
<li><span>Discussion of reports on power transformers</span></li>
<li><span>Use of unused insulating transformer oils</span></li>
<li><span>Market trends in the use of inhibited and uninhibited oils</span></li>
<li><span>Differences, advantages and drawbacks of uninhibited compared with inhibited oils</span></li>
<li><span>Importance of additives, oxidation stability tests, stray gassing, etc</span></li>
</ul>
<p>
</p></div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p><span>The VILT course is intended for a wide audience, including <strong>professionals who are maintenance staff, electrical engineers and asset managers responsible for transformers</strong>. Typical industries are powerplants, high voltage grids or large industrial sites.</span></p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The VILT course will be delivered online in 4 half-day sessions comprising 4 hours per day, with 2 x 10 minutes break per day, including time for lectures, discussion, quizzes and short classroom exercises.</span></p>
<p><span>Course Duration: 4 half-day sessions, 4 hours per session (16 hours in total).</span></p>
<p><span>This VILT course is delivered in partnership with ENGIE Laborelec.</span></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><span>Your expert course leader is a senior expert in the field of insulating and lubricating oils and of condition monitoring of power transformers and turbines. He has 20 years of experience within power industry and since 2010 Key Expert within the ENGIE group. </span><span>He has worked on various international projects such as the Al Dur power plant in Bahrain, Shuweihat II power plant in UAE, PP11 and Jubail Marafiq power plants in Saudi Arabia and Sohar II and Barka III power plants in Oman. He has also been involved in consulting work in Malaysia for Hyrax Oil. Other assignments include Shell, Nynas, Total, ABB, Alstom, CG Pauwels in Europe.</span></p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Advanced Level - Assessing and Monitoring the Condition of Power Transformers by Oil Analysis

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 3 full-day course will provide a comprehensive understanding of the various types of transformer maintenance including breakdown maintenance, preventive maintenance, total productive maintenance, condition-based maintenance, proactive maintenance, and reliability-centered maintenance. All the expected problems in dry and oil-filled transformers will be discussed in detail. All the diagnostics, troubleshooting and maintenance required to ensure adequate operation of transformers will be covered thoroughly. This course will focus on maximizing the efficiency, reliability, and longevity of all types of transformers by providing an understanding of all commissioning requirements, repair and refurbishment methods of transformers.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Equipment Diagnostics and Inspection:</strong> Learn in detail all the diagnostic techniques and inspections required of critical components of transformers</li>
<li><strong>Equipment Testing:</strong> Understand thoroughly all the routine tests, type tests, and special tests required for the various types of transformers</li>
<li><strong>Equipment Maintenance and Troubleshooting:</strong> Determine all the maintenance and troubleshooting activities required to minimize transformer downtime and operating cost</li>
<li><strong>Equipment Repair and Refurbishment:</strong> Gain a detailed understanding of the various methods used to repair and refurbish transformers</li>
<li><strong>Efficiency, Reliability, and Longevity:</strong> Learn the various methods used to maximize the efficiency, reliability, and longevity of transformers</li>
<li><strong>Equipment Sizing:</strong> Gain a detailed understanding of all the calculations and sizing techniques used for transformers</li>
<li><strong>Design Features:</strong> Understand all the design features that improve the efficiency and reliability of transformers</li>
<li><strong>Equipment Selection:</strong> Learn how to select all types of transformers by using the performance characteristics and selection criteria that you will learn in this course</li>
<li><strong>Equipment Commissioning:</strong> Understand all the commissioning requirements for transformers</li>
<li><strong>Equipment Codes and Standards:</strong> Learn all the codes and standards applicable for transformers</li>
<li><strong>Equipment Causes and Modes of Failure:</strong> Understand the causes and modes of failure in transformers</li>
<li><strong>System Design:</strong> Learn all the requirements for designing different types of transformer systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals (this course is suitable for individuals who do not have an electrical background)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Transformer Testing, Maintenance and Commissioning Manual (covering all the tests, maintenance activities, protective systems and all commissioning procedures for all types of transformers - 350 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Transformer Maintenance

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of all the maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems of all key electrical equipment including: transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries. It will cover in detail all the inspection methods and tests required to identify faults and deficiencies in electrical equipment, as well as, the repair techniques and available refurbishment methods.</p>
<p>The course will also cover the activities required to commission this equipment and it will also cover all protective systems associated with this equipment.  The objective of the seminar is to maximize the efficiency, reliability, and longevity of this type of equipment by providing an understanding of the common problems and repair techniques, preventive and predictive maintenance.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Electrical Equipment Testing and Maintenance: </strong>Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Inspection and Diagnostics: </strong>Learn about the inspection and diagnostics required for all the components of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Troubleshooting:</strong> Determine all the troubleshooting activities required to minimize the downtime and operating cost of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Online Condition Monitoring:</strong> Learn about online condition monitoring of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Electrical Equipment Repair and Refurbishment: </strong>Obtain a detailed understanding of the various methods used to repair and refurbish transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Efficiency, Reliability, and Longevity: </strong>Learn the various methods used to maximize the efficiency, reliability, and longevity of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Rotating </strong><strong>Equipment Vibration Analysis and Balancing Methods:</strong> Learn about vibration analysis and balancing methods of motors and generators.</li>
<li><strong>Electrical Equipment Codes and Standards: </strong>Learn all the codes and standards applicable for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Equipment Causes and Modes of Failure: </strong>Understand the causes and modes of failure of transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
<li><strong>Generator Upgrades and Rewinds:</strong> Learn the various methods used to upgrade and rewind a generator</li>
<li><strong>Protective Systems: </strong>Obtain a detailed understanding of all protective systems required for transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals (this course is suitable for individuals who do not have an electrical background)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>The relevant material of the 'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Electrical Equipment Maintenance, inspection, diagnostics, testing, troubleshooting, refurbishment, and protective systems Manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong><em> </em></h2>
<p>Electrical machines, mainly power transformers and electric motors are critical equipment that run production, and it must operate without any abnormalities. A wide variety of tests and standards have been developed to assist manufacturers and users of motors and transformer winding, assess the condition of the electrical insulation.</p>
<p>The objective of this training course is to provide an understanding of power transformers and electric motors, their materials, components, and how they operate. It will also emphasize the importance of transformer life management, especially for those transformers and electric motors which have been in operation for than 10 years. The course will address in detail all aspects related to transformer principles, calculations, operation, testing and maintenance.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>This course aims to provide participants with the understanding of the fundamentals and constructional features of power transformers and electric motors, with particular reference to the design, testing, operation and maintenance of transformers in power systems.</p>
<p>Delegates will gain a detailed appreciation of the following:</p>
<ul>
<li>Practical solutions for specifying, operating and maintaining power transformers and electric motors in a utility or plant environment</li>
<li>Comprehensive understanding of principles, protection, maintenance and troubleshooting of power transformers and electric motors</li>
<li>The necessary safe procedures relating to transformer operation and related circuitry</li>
<li>Understand the principles of operation of the transformer and electric motors</li>
<li>Identify the different features of power transformers and electric motors</li>
<li>Appreciate the principles of transformer design, ratings, winding, core structure and materials, insulation and cooling methods, insulation and lifetime</li>
<li>Utilize thermal limits and loading guides of transformers</li>
<li>Analyze transformer and electric motors failure modes</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The VILT will be delivered online in 4 half-day sessions comprising 4 hours per day, with 1 x 10 minutes break per day, including time for lectures, discussion, quizzes and short classroom exercises.</p>
<p>Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end the course.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Our key expert is actively involved in electrical inspections, energy audits, energy efficiency and technical consultation for M&amp;E activities for industrial and commercial sectors.</p>
<p>He is involved in testing and commissioning works of factory substations of up to 132kV system. He previously worked for Jimah coal-fired power plant in Port Dickson for 9 years with his last position being Electrical Maintenance Section Head. He was involved in the commissioning of coal-fired power plant mainly with 500kV generator transformer, 934 MVA generator, and up to 33kV MV motors and switchgear panels.</p>
<p>Our key expert has managed the maintenance team to perform routine maintenance activities (together with supporting tools such as motor lube oil analysis, infrared thermography analysis, transformer oil analysis) &amp; electrical troubleshooting and plant outages for critical and non-critical equipment.</p>
<p>Besides that, our key expert has published several IEEE conference papers and journals such as:</p>
<ul>
<li>(2009). Effectiveness of auxiliary system monitoring &amp; continuous hydrogen scavenging operation on hydrogen-cooled generator at power plant. In Energy and Environment, 2009. ICEE 2009. 3rd International Conference on (pp. 151-160). IEEE.</li>
<li>(2010). Study on electric motor mass unbalance based on vibration monitoring analysis technique. In Mechanical and Electrical Technology (ICMET), 2010 2nd International Conference on (pp. 539-542). IEEE.</li>
<li>(2012). Re-Design of AC Excitation Busduct based on Infrared (IR) Thermography: Condition-Based Monitoring (CBM) data analysis. eMaintenance, 101.</li>
<li>(2016). Energy Saving Studies for a University Campus: An Educational-Based Approach, 3rd International Conference on Language, Education, Humanities and Innovation 2016.</li>
<li>'Grid-tied photovoltaic and battery storage systems with Malaysian electrcity tariff - A review on maximum demand shaving.' Energies 10.11 (2017): 1884</li>
<li>'Techno-Economic Optimization of Grid-Connected Photovoltaic (PV) and Battery Systems Based on Maximum Demand Reduction (MDRed) Modelling in Malaysia.' Energies 12.18 (2019): 3531</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Operations, Maintenance and Testing of Power Transformer & Electric Motors

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of all electrical equipment including transformers, switchgear, induction and synchronous motors, generators and auxiliaries. All commissioning activities are covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, documentation, testing and commissioning schedules, test reports, safety, certification, and plant completion report. The course provides also a thorough understanding of all the commissioning requirements for transformers, switchgear, induction and synchronous motors and, generator and auxiliaries including its switchgear equipment, switchgear, and transformers.</p>
<p>All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures for every type of transformers, switchgear, induction and synchronous motors, and generators and auxiliary systems, instrumentation, trial run of the equipment, safety and precautions, commissioning of electrical systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports.</p>
<p>This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any electrical equipment because it provides detailed pre-commissioning checks and tests and detailed tests and commissioning procedures for every electrical equipment. In addition, the course provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each electrical equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for all Electrical Equipment: </span></strong><span>Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for all electrical equipment</span></li>
<li><strong><span>Commissioning Procedures, Documents, and Certification of Electrical Equipment:</span></strong><span> Discover the benefits of the Commissioning Management System of electrical equipment including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, documentation, testing and commissioning schedules, test reports, safety, equipment certification, and commissioning completion report</span></li>
<li><span><strong>Commissioning Procedures for Transformers</strong>: </span><span>Learn about the commissioning procedures for transformers including functional checks, pre-commissioning tests, commissioning tests, and records.</span></li>
<li><strong><span>Commissioning Procedures for Switchgear Assemblies: </span></strong><span>Gain a thorough understanding of all the commissioning procedures for switchgear assemblies including substation commissioning, electrical testing, code requirements, safety rules, grounding and shorting, high power testing, NETA acceptance testing procedures, test values analysis, and commissioning forms</span></li>
<li><strong><span>Commissioning Procedures for Generator and Auxiliaries: </span></strong><span>Discover all the commissioning procedures for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator</span></li>
<li><span><strong>Commissioning Procedures and Instructions for Generator Electrical Equipment:</strong> </span><span>Learn about all the commissioning procedures and instructions for generator electrical equipment including switchyard equipment, switchgear, transformers, and motors</span></li>
<li><strong><span>Code Requirements for Commissioning Electrical Equipment and Systems: </span></strong><span>Learn about the code requirements for commissioning transformers, switchgear, inductions and synchronous motors, and generators and auxiliaries</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>ELECTRICAL EQUIPMENT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for all electrical equipment - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Commissioning of Electrical Equipment

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of circulating fluidized bed (CFB) boiler coal power plants. The Commissioning Management System of CFB boiler coal power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report.</p>
<p>The course provides also a thorough understanding of all the commissioning requirements for CFB boiler and auxiliaries, turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear, and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a coal power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of CFB boiler coal power plant systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports.</p>
<p>This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any CFB boiler coal power plant equipment because it provides detailed pre-commissioning checks and detailed tests and commissioning procedures and instructions for every component in a CFB boiler coal power plant.</p>
<p>In addition, the course provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each CFB boiler coal power plant equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in CFB Boiler Coal Power Plants:</span></strong><span> Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in CFB boiler coal power plants</span></li>
<li><strong><span>Commissioning Management System of CFB Boiler Coal Power Plants:</span></strong><span> Discover the benefits of the Commissioning Management System of CFB boiler coal power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report</span></li>
<li><strong><span>Commissioning Procedures and Instructions for CFB Boiler and Auxiliaries in Coal Power Plants:</span></strong><span> Learn about the commissioning procedures and instructions for CFB boiler and auxiliaries including all commissioning activities, typical commissioning schedule, hydraulic test and wet preservation, air and gas tightness test, trial run of equipment, electronic precipitators, fuel oil system, preparation for first light up, alkali boil - out, acid cleaning and passivation, thermal flow test of economizer, water walls, and superheater, valves, steam boiling, and safety valve setting</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Turbine and Auxiliaries:</span></strong><span> Gain a thorough understanding of all the commissioning procedures and instructions for turbine and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Generator and Auxiliaries:</span></strong><span> Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Electrical Equipment: </span></strong><span>Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers, and motors</span></li>
<li><strong><span>CFB Boiler Coal Power Plant Equipment and Systems:</span></strong><span> Learn about various CFB boiler coal power plant equipment and systems including: CFB boilers, superheaters, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>CFB BOILER COAL POWER PLANT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component and system in CFB boiler coal power plants - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Commissioning and Start-Up Activities of Coal Power Plants

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control. With the growing importance of grid integration of renewables and the interest in smart grid technologies, it is more important than ever to understand the fundamentals that underpin electrical power systems.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Basic Terminology and Concepts of Electrical Systems:</strong> Gain an understanding of the basic terminology and concepts of electrical systems and the structure of a power system</li>
<li><strong>Transmission Line Parameters:</strong> Learn in detail all the transmission line parameters including line resistance, line inductance, transposition of transmission lines, and capacitance of transmission lines</li>
<li><strong>Insulators:</strong> Understand thoroughly all the various types of insulators, pin type insulators, suspension type or disc insulators, strain insulators, and testing of insulators</li>
<li><strong>High-Voltage Direct Current Transmission:</strong> Determine the advantages and disadvantages of high voltage direct current transmission, and gain an understanding of all the features of high-voltage direct current transmission</li>
<li><strong>Substations and Neutral Grounding:</strong> Gain a detailed understanding of all substation equipment, factors governing the layout of substations, station transformers, elements to be earthed in a substation, power system earthing, earthing transformers, bus bar arrangements and gas-insulated substations</li>
<li><strong>Distribution System:</strong> Learn about the effects of voltage on the conductor volume, distributor fed from one end, distributors fed from both ends at the same voltage, distributors fed from both ends at different voltages, and alternating current distribution</li>
<li><strong>Circuit Breakers:</strong> Learn about the classification of circuit breakers, plain-break oil circuit breakers, air break circuit breaker, air blast circuit breakers, vacuum circuit breakers, SF6 circuit breakers, rating and testing of circuit breakers</li>
<li><strong>Relaying and Protection:</strong> Learn all the requirements of relaying, zones of protection, primary and backup protection, classification of relays, electromagnetic relays, induction relays, feeder protection, phase fault protection, reactance relay, static overcurrent relay, differential protection, transformer protection, Buchholz relays, alternator protection restricted earth fault protection, rotor earth fault protection, and negative-sequence protection</li>
<li><strong>Economic Operation of Power Systems:</strong> Gain an understanding of steam power plants, heat rate characteristics and characteristics of hydro plants</li>
<li><strong>Load Frequency Control:</strong> Learn about speed governing mechanism, speed governor, steady state speed regulations and adjustment of governor characteristics</li>
<li><strong>Voltage and Reactive Power Control:</strong> Gain an understanding of impedance and reactive power, system voltage and reactive power, voltage regulation and power transfer</li>
<li><strong>Renewable Energy Sources:</strong> Learn about solar power, wind power, geothermal energy, biomass and tidal power</li>
<li><strong>Restructuring of Electrical Power Systems:</strong> Gain an understanding of smart grids, smart grid components, smart grid benefits, and open smart grid protocol</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Introduction to Power Systems

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p><span>This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control. With the growing importance of grid integration of renewables and the interest in smart grid technologies, it is more important than ever to understand the fundamentals that underpin electrical power systems.</span></p>
<p><span>This course provides a thorough understanding of all basic terminology and concepts of electrical systems, structure of a power system, transmission line parameters, insulators, high-voltage direct current transmission, substation and neutral grounding, distribution system, circuit breakers, relaying and protection, power system stability, economic operation of power systems, load frequency control, voltage and reactive power control, renewable energy sources, restructuring of electrical power systems, and smart grids.</span></p>
<p><span>This course is a MUST for practitioners, consultants, engineers of all disciplines, managers, technicians and all technical personnel who need to learn about electrical power systems.</span></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Basic Terminology and Concepts of Electrical Systems:</strong> Gain an understanding of the basic terminology and concepts of electrical systems and the structure of a power system</li>
<li><strong>Transmission Line Parameters:</strong> Learn in detail all the transmission line parameters including line resistance, line inductance, transposition of transmission lines, and capacitance of transmission lines</li>
<li><strong>Insulators:</strong> Understand thoroughly all the various types of insulators, pin type insulators, suspension type or disc insulators, strain insulators, and testing of insulators</li>
<li><strong>High-Voltage Direct Current Transmission:</strong> Determine the advantages and disadvantages of high voltage direct current transmission, and gain an understanding of all the features of high-voltage direct current transmission</li>
<li><strong>Substations and Neutral Grounding:</strong> Gain a detailed understanding of all substation equipment, factors governing the layout of substations, station transformers, elements to be earthed in a substation, power system earthing, earthing transformers, bus bar arrangements and gas-insulated substations</li>
<li><strong>Distribution System:</strong> Learn about the effects of voltage on the conductor volume, distributor fed from one end, distributors fed from both ends at the same voltage, distributors fed from both ends at different voltages, and alternating current distribution</li>
<li><strong>Circuit Breakers:</strong> Learn about the classification of circuit breakers, plain-break oil circuit breakers, air break circuit breaker, air blast circuit breakers, vacuum circuit breakers, SF6 circuit breakers, rating and testing of circuit breakers</li>
<li><strong>Relaying and Protection:</strong> Learn all the requirements of relaying, zones of protection, primary and backup protection, classification of relays, electromagnetic relays, induction relays, feeder protection, phase fault protection, reactance relay, static overcurrent relay, differential protection, transformer protection, Buchholz relays, alternator protection restricted earth fault protection, rotor earth fault protection, and negative-sequence protection</li>
<li><strong>Economic Operation of Power Systems:</strong> Gain an understanding of steam power plants, heat rate characteristics and characteristics of hydro plants</li>
<li><strong>Load Frequency Control:</strong> Learn about speed governing mechanism, speed governor, steady state speed regulations and adjustment of governor characteristics</li>
<li><strong>Voltage and Reactive Power Control:</strong> Gain an understanding of impedance and reactive power, system voltage and reactive power, voltage regulation and power transfer</li>
<li><strong>Renewable Energy Sources:</strong> Learn about solar power, wind power, geothermal energy, biomass and tidal power</li>
<li><strong>Restructuring of Electrical Power Systems:</strong> Gain an understanding of smart grids, smart grid components, smart grid benefits, and open smart grid protocol</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><strong>The VILT will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 x 10 minutes break per day</strong>, including time for lectures, discussion, quizzes and short classroom exercises.</p>
<p>Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end the course.</p>
<p>The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Introduction to Power Systems Manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Wind has surpassed hydro-power generation in many countries recently. Wind energy offers many advantages, which explains why it's one of the fastest-growing energy sources in the world. The following are the advantages of wind power:</p>
<ul>
<li>Wind power is cost effective: Land-based utility-scale wind is one of the lowest-priced energy sources available today</li>
<li>The fuel for wind power is free. This reduces the operation and maintenance cost of wind power plants significantly</li>
<li>Wind is a clean source of power generation that does not pollute the air like power plants which rely on combustion of fossil fuel</li>
<li>Wind power plants create jobs. Wind turbine technician is the fastest growing career in many countries</li>
<li>Wind enables industry growth and competitiveness due to its low cost</li>
<li>Wind power is a domestic source of energy. The wind supply is abundant and inexhaustible. The wind power generation capacity has become the largest source of renewable power in many countries</li>
<li>Wind turbines can be built on existing farms and ranches. This greatly benefits the economy in rural areas, where most of the best wind sites are found. Wind power plant owners make rent payments to the farmers or ranchers for the use of their land, providing landowners with additional income</li>
</ul>
<p>This 5 half-day course covers all aspects of wind power plants including evaluation of a potential location for a wind power plant using wind data and using statistical distributions to approximate available wind energy at a wind power plant site. It provides also an in-depth understanding of all wind power plant equipment including wind turbines, generators, instrumentation and control systems, drive trains, gearboxes, doubly fed induction generators, synchronous generators, nacelles, towers, transformers, etc.</p>
<p>The economics of a wind power plant including economic analysis of wind power generation, economic comparison between a large- and small-scale wind power plant, economic decision making, rate of return from a wind power plant, economic life and replacement of a wind power plant as well as the cost of electricity from wind power plants are covered in detail in this course. A thorough explanation of the design, operation and maintenance of on-shore and off-shore wind farms is presented in detail in this course as well as all the significant improvements that have been made to wind power generating plants during the last two decades.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Evaluation of a Potential Location for a Wind Power Plant Using Wind Data: </span></strong><span>Learn how to evaluate the potential location for a wind turbine power plant using wind data.</span></li>
<li><strong><span>Using Statistical 'Rayleigh' Distribution to Approximate Available Power Generation from a Wind Turbine at a Specific Site:</span></strong><span> Learn how to use statistical 'Rayleigh' distribution to approximate available power generation from a wind turbine at a specific site.</span></li>
<li><strong><span>Calculate the Wind Energy Available at a Site: </span></strong><span>Gain an understanding on how to calculate the wind energy available at a site.</span></li>
<li><strong><span>Rated Capacity of a Wind Facility and Capacity Factor: </span></strong><span>Understand how to determine the rated capacity of a wind facility and its capacity factor.</span></li>
<li><strong><span>Designing a Wind Power Generating Plant:</span></strong><span> Learn how to design a wind power generating plant.</span></li>
<li><strong><span>Wind Power Plant Equipment Operation and Maintenance:</span></strong><span> Understand the operation and maintenance requirements for all wind power plant equipment including wind turbines, generators, nacelles, towers, transformers, etc.</span></li>
<li><strong><span>Wind Power Plant Instrumentation and Control Systems: </span></strong><span>Gain a thorough understanding about the latest instrumentation and control systems of wind power</span> <span>plants.</span></li>
<li><strong><span>Economics of Wind Power Plants: </span></strong><span>Gain a thorough understanding of the economics of wind power plants including economic analysis of wind power generation, economic comparison between a large- and small-scale wind power plant, comparison of alternatives, rate of return from a wind power plant, financial statements for a wind power plant, cost of electricity from a wind power plant, and levelized cost of wind energy.</span></li>
</ul>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a soft copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>POWER GENERATION HANDBOOK' second edition, published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Wind Power Generating Plant Manual (500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Wind Power Generation: Advantages, Design, Site Selection, Equipment Selection, Operation and Maintenance, On-Shore and Off-Shore Wind Farms, Economics, Rate of Return, and Cost of Electricity from Wind Power Plants

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong><em> </em></h2>
<p>This 5 half-day virtual course provides a detailed description of all the methods used to reduce the heat rate (increase the efficiency) of pulverized coal and circulating fluidized bed (CFB) coal power plants. All the processes, operational and maintenance activities, capital projects, technical options, potential initiatives and incentives to implement upgrades/repairs for increasing the plant efficiency will be covered in detail.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Calculate the Heat Rate of Coal Power Plants:</strong> Learn all the methods used to calculate the heat rate of coal power plants</li>
<li><strong>Benefits of Lowering the Heat Rate of Coal Power Plants:</strong> Understand all the benefits of lowering the heat rate of coal power plants</li>
<li><strong>Methods Used to Improve Coal Power Plants Heat Rate:</strong> Gain a thorough understanding of all the methods used to improve the heat rate of coal power plants</li>
<li><strong>Processes, Operational and Maintenance Activities:</strong> Discover all the processes, operational and maintenance activities used to improve the heat rate of coal power plants</li>
<li><strong>Capital Projects Used to Improve the Heat Rate:</strong> Learn about all the capital projects used to improve the heat rate of coal power plants</li>
<li><strong>Technical Options for Improving the Heat Rate:</strong> Understand all the technical options used to improve the heat rate of coal power plants</li>
<li><strong>Potential Initiatives and Incentives to Implement Upgrades/Repairs for Improving the Heat Rate: </strong>Discover all the potential initiatives and incentives to implement upgrades/repairs for improving the heat rate of coal power plants</li>
<li><strong>Factors Affecting Coal Power Plant Efficiency and Emissions:</strong> Learn about all the factors which affect coal power plants efficiency and emissions</li>
<li><strong>Areas in Pulverized Coal and Circulating Fluidized Bed (CFB) Power Plants where Efficiency </strong><strong>Loss Can Occur:</strong> Discover all the areas in pulverized coal and circulating fluidized bed (CFB) power plants where efficiency loss can occur</li>
<li><strong>Optimize the Operation of Coal Power Plant Equipment and Systems to improve the Plant Heat Rate:</strong> Understand all the techniques and methods used to optimize the operation of coal power plant equipment and systems to improve the plant heat rate</li>
<li><strong>Coal Power Plant Equipment and Systems:</strong> Learn about various coal power plant equipment and systems including boilers, superheaters, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The VILT will be delivered online in 5 half-day sessions comprising 4 hours per day, with 1 x 10 minutes break per day, including time for lectures, discussion, quizzes and short classroom exercises.</p>
<p>Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end the course.</p>
<p>The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Educators providing Courses in Birmingham

Courses matching "Transformers"

Advanced Level - Assessing and Monitoring the Condition of Power Transformers by Oil Analysis

By EnergyEdge - Training for a Sustainable Energy Future

Transformer Maintenance

By EnergyEdge - Training for a Sustainable Energy Future

Maintenance, Inspection, Diagnostics, Testing, Troubleshooting, Refurbishment, & Protective Systems For All Key Electrical Equipment

By EnergyEdge - Training for a Sustainable Energy Future

Operations, Maintenance and Testing of Power Transformer & Electric Motors

By EnergyEdge - Training for a Sustainable Energy Future

Commissioning of Electrical Equipment

By EnergyEdge - Training for a Sustainable Energy Future

Commissioning and Start-Up Activities of Coal Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Introduction to Power Systems

By EnergyEdge - Training for a Sustainable Energy Future

Introduction to Power Systems

By EnergyEdge - Training for a Sustainable Energy Future

Wind Power Generation: Advantages, Design, Site Selection, Equipment Selection, Operation and Maintenance, On-Shore and Off-Shore Wind Farms, Economics, Rate of Return, and Cost of Electricity from Wind Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Heat Rate Optimization of Coal Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location