Name: Combustion Engineering for Coal Fired Power Plants
Price: 3009 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will cover all aspects of steam turbines including design and features of modern turbines, material, rotor balancing, features enhancing the reliability and maintainability of steam turbines, rotor dynamic analysis, Campbell, Goodman and SAFE diagrams, Blade failures: causes and solutions, maintenance and overhaul of steam turbines, and modeling of steam turbines. This course will also cover in detail all the components of these turbines, instrumentation, control systems, governing systems, and selection criteria.</p>
<p>The main focus of this course will be on the failure modes of steam turbine components, causes and solutions for component failure, maintenance, refurbishment and overhaul, rotor dynamic analysis of steam turbines, and computer simulation of steam turbine rotor dynamics. All possible failure modes of steam turbine components and the maintenance required to prevent them will be discussed in detail. Examples of rotor dynamic analysis, and stability criteria will be covered thoroughly.</p>
<p>This course will also provide up-dated information in respect to all the methods used to enhance the availability, reliability, and maintainability of steam turbines, increase the efficiency and longevity of steam turbines, and improve the rotor dynamic stability. This course will also cover in detail all steam turbine valves, jacking oil system, turning gear, turbine supervisory system, steam turbine monitoring technology, validation, and verification tests, performance testing of steam turbines and steam turbine codes especially ASME PTC6.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Steam Turbine Components and Systems:</span></strong><span> Learn about all components and systems of the various types of steam turbines such as: stationary and rotating blades, casings, rotor, seals, bearings, and lubrication systems</span></li>
<li><strong><span>Steam Turbine Failure Modes, Inspection, Diagnostic Testing, and Maintenance:</span></strong><span> Understand all the failure modes of steam turbine components, causes and solutions of steam turbine component failure, inspection, diagnostic testing, and all maintenance activities required for steam turbines to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Steam Turbine Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation, control systems, and governing systems of steam turbines</span></li>
<li><strong><span>Steam Turbine Reliability and Maintainability:</span></strong><span> Increase your knowledge about all the methods used to enhance the reliability and maintainability of steam turbines as well as the predictive and preventive maintenance required for steam turbines</span></li>
<li><strong><span>Steam Turbine Selection and Applications:</span></strong><span> Gain a detailed understanding of the selection considerations and applications of steam turbines in steam power plants, co-generation, combined-cycle plants, and drivers for compressors pumps, etc</span></li>
<li><strong><span>Steam Turbine Valves, Load-Frequency Control, Turbine Bypass Systems, and Steam Turbine Superheater Attemperators:</span></strong><span> Gain a thorough understanding of all steam turbine valves, load-frequency control, turbine bypass systems, and steam turbine superheater attemperators</span></li>
<li><strong><span>Jacking Oil System and Turning Gear:</span></strong><span> Learn about the turbine jacking oil system and turning gear operation</span></li>
<li><strong><span>Turbine Supervisory System:</span></strong><span> Gain a thorough understanding of the turbine supervisory system</span></li>
<li><strong><span>Steam Turbine Monitoring Technology, Validation, and Verification Tests for Power Plants:</span></strong><span> Learn about steam turbine monitoring technology, validation, and verification tests for power plants</span></li>
<li><strong><span>Steam Turbine Codes:</span></strong><span> Learn about steam turbine codes including ASME PTC6, DIN Test Code, and International Electrotechnical Commission (IEC) Doc 1, IEC Doc B</span></li>
<li><strong><span>Steam Turbine Rotor Dynamic Analysis, Campbell, Goodman, and SAFE Diagrams: </span></strong><span>Gain a thorough understanding of steam turbine rotor dynamic analysis, Campbell, Goodman, and SAFE diagrams</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>STEAM TURBINE TECHNOLOGY MANUAL (includes practical information about steam turbines maintenance, testing, and refurbishment - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Steam Turbine Technology

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of all electrical equipment including transformers, switchgear, induction and synchronous motors, generators and auxiliaries. All commissioning activities are covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, documentation, testing and commissioning schedules, test reports, safety, certification, and plant completion report. The course provides also a thorough understanding of all the commissioning requirements for transformers, switchgear, induction and synchronous motors and, generator and auxiliaries including its switchgear equipment, switchgear, and transformers.</p>
<p>All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures for every type of transformers, switchgear, induction and synchronous motors, and generators and auxiliary systems, instrumentation, trial run of the equipment, safety and precautions, commissioning of electrical systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports.</p>
<p>This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any electrical equipment because it provides detailed pre-commissioning checks and tests and detailed tests and commissioning procedures for every electrical equipment. In addition, the course provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each electrical equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for all Electrical Equipment: </span></strong><span>Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for all electrical equipment</span></li>
<li><strong><span>Commissioning Procedures, Documents, and Certification of Electrical Equipment:</span></strong><span> Discover the benefits of the Commissioning Management System of electrical equipment including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, documentation, testing and commissioning schedules, test reports, safety, equipment certification, and commissioning completion report</span></li>
<li><span><strong>Commissioning Procedures for Transformers</strong>: </span><span>Learn about the commissioning procedures for transformers including functional checks, pre-commissioning tests, commissioning tests, and records.</span></li>
<li><strong><span>Commissioning Procedures for Switchgear Assemblies: </span></strong><span>Gain a thorough understanding of all the commissioning procedures for switchgear assemblies including substation commissioning, electrical testing, code requirements, safety rules, grounding and shorting, high power testing, NETA acceptance testing procedures, test values analysis, and commissioning forms</span></li>
<li><strong><span>Commissioning Procedures for Generator and Auxiliaries: </span></strong><span>Discover all the commissioning procedures for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator</span></li>
<li><span><strong>Commissioning Procedures and Instructions for Generator Electrical Equipment:</strong> </span><span>Learn about all the commissioning procedures and instructions for generator electrical equipment including switchyard equipment, switchgear, transformers, and motors</span></li>
<li><strong><span>Code Requirements for Commissioning Electrical Equipment and Systems: </span></strong><span>Learn about the code requirements for commissioning transformers, switchgear, inductions and synchronous motors, and generators and auxiliaries</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>ELECTRICAL EQUIPMENT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for all electrical equipment - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Commissioning of Electrical Equipment

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVRs), governing systems, and protective systems.</p>
<p>The focus will be on maximizing the efficiency, reliability and longevity of these equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p>
<p>The emphasis of this course is on protective systems, inspection methods, diagnostic testing, troubleshooting, modern maintenance techniques, refurbishment, rewind and upgrade options, as well as advanced methods for preventing partial discharge and other failures.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Equipment Operation:</strong> Gain a thorough understanding of the operating characteristics of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Diagnostics and Inspection:</strong> Learn in detail all the diagnostic techniques and inspections required of critical components of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Testing:</strong> Understand thoroughly all the tests required for the various types of generators, exciters, AVR's and protective systems</li>
<li><strong>Electrical Generator Protective Systems:</strong> Gain a thorough understanding of all Electrical generator protective systems including: all electrical relays, tripping mechanisms, protective systems for negative phase sequence (unbalance loading), loss of excitation, over fluxing protection (over-voltage and underfrequency), reverse power (generator monitoring), over-speeding, pole slipping / out of step (sudden increase in torque or weakness in excitation), Class A protection, Class B protection</li>
<li><strong>Equipment Maintenance and Troubleshooting:</strong> Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Repair and Refurbishment:</strong> Gain a detailed understanding of the various methods used to repair and refurbish generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Rewind and Upgrade Options:</strong> Discover all options available to rewind and upgrade the generator rotor and stator to enhance the output and reduce downtime</li>
<li><strong>Efficiency, Reliability, and Longevity:</strong> Learn the various methods used to maximize the efficiency, reliability, and longevity of generators, exciters, AVR's and protective systems</li>
<li><strong>Advanced Methods to Prevent Failure:</strong> Gain a thorough understanding of all the methods used to prevent partial discharge, and other failures in generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Sizing:</strong> Gain a detailed understanding of all the calculations and sizing techniques used for generators, exciters, AVR's and protective systems</li>
<li><strong>Design Features:</strong> Understand all the design features that improve the efficiency, reliability of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Selection:</strong> Learn how to select generators, exciters, AVR's and protective systems by using the performance characteristics and selection criteria that you will learn in this course</li>
<li><strong>Equipment Enclosures and Sealing Methods:</strong> Learn about the various types of enclosures and sealing arrangements used for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Commissioning:</strong> Understand all the commissioning requirements for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Codes and Standards:</strong> Learn all the codes and standards applicable for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Causes and Modes of Failures:</strong> Understand causes and modes of failures of generators, exciters, AVR's and protective systems</li>
<li><strong>System Design:</strong> Learn all the requirements for designing different types of generators, exciters, AVR's and protective systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Generator Inspection, Testing, Maintenance, Protective Systems and Refurbishment Manual (this manual covers all the inspection and maintenance activities as well as all protective systems required for generators - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Electrical Generators, Excitation Systems and Governing Systems

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This course will begin with a presentation of topics to familiarize Process and Instrumentation Engineers with procedures and practices involved in the choice of sensors related to the measurement of temperature, pressure, level and flow in relation to single-phase flows. It will provide guidance on the optimum commercially available devices through a detailed comparison of their relative merits. At the heart of this course is sensor calibration which is a crucial element for these topics.</p>
<p>The course will also examine the various types of flow control valve, including Globe, Slide, Needle, Eccentric plug and Ball valves and their characteristics in industrial application, while focusing on the problems of Cavitation and Flashing and methods to minimise or eradicate these issues. With the use of examples, industry case studies and a wide range of videos, this course will also cover all aspects of proportional (P), derivative (D) and integral (I) control. In particular, it will address the advantages and disadvantages of PI and PID control. It will also describe Cascade, Feed forward, Split Range, Override and Ratio Control techniques.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By attending this course, participants will acquire the following knowledge and skills:</p>
<ol>
<li>Apply an in-depth knowledge to the measurement of temperature, pressure, level and flow as well as to the fluid mechanics of pipe flows</li>
<li>Assess the advantages and disadvantages of the major flowmeter types including the differential pressure, rotary positive displacement, rotary-inferential, electromagnetic, ultrasonic and Coriolis mass flowmeters to determine the optimum choice for a given application</li>
<li>Make a considered judgement of the choice of fluid level measurement devices</li>
<li>Understand the various types of flow calibration, metering systems and provers</li>
<li>Carry out tank measurement and tank calibration methods and to calculate net sellable quantities</li>
<li>Discuss valve characteristics &amp; trim selection and illustrate the process of control valve sizing</li>
<li>Explain the terms Open and Closed loop</li>
<li>Define Process Variable, Measured Variable, Set Point and Error</li>
<li>Define Direct and Reverse controller actions</li>
<li>Explain the terms Process Lag, Measurement Lag, Transmission Lag, and Response Lag and their effect on controllability</li>
<li>Explain ON/ OFF Control and the inherent disadvantages</li>
<li>Explain Proportional Control, Offset, Gain and Proportional Band and the advantages and disadvantages of Proportional only control</li>
<li>Explain the fundamentals and operation principles of Integral (I) Action and the disadvantages of proportional plus integral control</li>
<li>Explain the fundamentals and operation principles of Derivative (D) Action in conjunction with P action</li>
<li>Describe the operating principles of a PID Controller and explain the applications and advantages of PID control</li>
<li>Describe Cascade, Forward, Split Range and Ratio Control operation principles</li>
</ol>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course will benefit <strong>instrumentation, inspection, control, custody metering and process engineers and other technical staff</strong>. It is also suitable for <strong>piping engineers, pipelines engineers, mechanical engineers, operations engineers, maintenance engineers, plant/field supervisors and foremen and loss control coordinators</strong>.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a Senior Mechanical &amp; Instrumentation Engineer (UK, B. Sc., M.Eng., Ph D) with over 45 years of industrial experience in Process Control &amp; Instrumentation, Pumps, Compressors, Turbines and Control Valve Technology. He is currently a Senior Independent Consultant to various petrochemical industries in the UK, USA, Oman, Kuwait and KSA where he provides consultancy services on both the application and operational constraints of process equipment in the oil &amp; gas industries.</p>
<p>During his early career, he held key positions in Rolls Royce (UK) where he was involved in the design of turbine blading for jet engines, subject to pre-specified distributions of pressure. During this period and since, he has also been closely involved in various aspects of Turbomachinery, Thermodynamics and Fluid Mechanics where he has become a recognised authority in these areas.</p>
<p>Later, he joined the academic staff of University of Liverpool in the UK as a Professor in Mechanical Engineering Courses. A substantial part of his work has been concerned with detailed aspects of Flowmetering - both of single &amp; multiphase flows. He has supervised doctoral research students in this area in collaboration with various European flowmeter manufacturers.</p>
<p>He joined Haward Technology Middle East in 2002 and was later appointed as European Manager (a post which has since lapsed) and has delivered over 150 training courses in Flowmeasurement (single- and multi-phase), Control, Heat Exchangers, Pumps, Turbines, Compressors, Valve and Valve Selection as well as other topics throughout the UK, USA, Oman and Kuwait. During the last two years, he has delivered courses with other training companies operating in the Far and Middle East.</p>
<p>He has published about 150 papers in various Engineering Journals and International Conferences and has contributed to textbooks on the topics listed above.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Process Control and Instrumentation

<div fr-original-style="" style="box-sizing: border-box;">
<br fr-original-style="" style="box-sizing: border-box;"></div>
<section fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<h2 fr-original-style="" style="box-sizing: border-box;">About this training course</h2>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This 3-days training will provide a comprehensive review of integrity of wells exposed to carbon dioxide (CO2) in the context of Carbon Capture Utilization for enhanced oil recovery and Storage (CCUS). CO2 geological storage is a proven technology to reduce greenhouse gas emissions from sources such as coal power plants, cement kilns and steel mills. Wells are widely considered the most critical containment element, especially older wells that are not used to inject CO2 or monitor the plume evolution in the storage reservoir. The main reason for this perceived risk is the high corrosion rate of carbon steel when exposed to wet CO2, and the tendency of Portland cement to react with the gas.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The training course advanced contents build on 15 years&#39; experience in carbon storage, both in the development and deployment of technologies. First-hand, in-depth knowledge of the subject will allow us to debunk myths and focus on the real challenges of wells encountering CO2.</p>
</div>
</section>
<section fr-original-style="" style="box-sizing: border-box;">
<div id="accordion" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Objectives 

</div>
<div id="collapseOne" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">After the completion of this training course, participants will be able to:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Explain the CCUS market drivers</li>
<li fr-original-style="" style="box-sizing: border-box;">Examine the behavior of CO2, on surface and in the reservoir</li>
<li fr-original-style="" style="box-sizing: border-box;">Diagnose cement defects and design repairs</li>
<li fr-original-style="" style="box-sizing: border-box;">Understand the limits of Portland cement</li>
<li fr-original-style="" style="box-sizing: border-box;">Assess the benefits of different technologies and materials</li>
<li fr-original-style="" style="box-sizing: border-box;">Realize why geology is a dominant factor in cement performance</li>
<li fr-original-style="" style="box-sizing: border-box;">Critically choose the most appropriate monitoring techniques</li>
<li fr-original-style="" style="box-sizing: border-box;">Classify aging processes of cement, steel, and rock when exposed to CO2</li>
<li fr-original-style="" style="box-sizing: border-box;">Assess the risk of existing wells if they encounter the CO2 plume</li>
<li fr-original-style="" style="box-sizing: border-box;">Examine recent advances in real-time approaches to the production monitoring and lift management</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Target Audience 

</div>
<div id="collapseTwo" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This training course is suitable and will greatly benefit:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">All surface technical personnel such as process engineers &amp; technologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Facility engineers, production engineers &amp; technologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Drilling engineers and Well engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Design engineers and Integrity engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">P&amp;A engineers and Cementing engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Geologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Senior management executives will benefit from this training as covers an overview of the technical and commercial details of CO2 capture technologies and risks involved.</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Course Level 

</div>
<div id="collapsecl" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Intermediate</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Methods 

</div>
<div id="collapseThree" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.</span></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Course Duration: 3 days in total (21 hours).</span></em></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Training Schedule</span></strong></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">0830 - Registration </span><span fr-original-style="" style="box-sizing: border-box;">0900 - Start of training </span><span fr-original-style="" style="box-sizing: border-box;">1030 - Morning Break </span><span fr-original-style="" style="box-sizing: border-box;">1045 - Training recommences </span><span fr-original-style="" style="box-sizing: border-box;">1230 - Lunch Break </span><span fr-original-style="" style="box-sizing: border-box;">1330 - Training recommences </span><span fr-original-style="" style="box-sizing: border-box;">1515 - Evening break </span><span fr-original-style="" style="box-sizing: border-box;">1530 - Training recommences </span><span fr-original-style="" style="box-sizing: border-box;">1700 - End of Training</span></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">The maximum number of participants allowed for this training course is 20.</span></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This course is also available through our Virtual Instructor Led Training (VILT) format.</p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Trainer

</div>
<div id="collapseFive" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your expert course leader is an engineer with a passion for well integrity and possesses 28 years of international experience in field operations, technology development and management in the oil &amp; gas and carbon storage sectors. Since 2018 he is program chair of the Well Integrity Technical Section of the Society of Petroleum Engineers (SPE). He is also author or co-author of 31 technical papers, a book chapter on CO2 geological storage and 7 patent applications. He delivers training on well integrity, plug and abandonment, asset integrity, risk management and QHSE across the Eastern Hemisphere, and carries out active research on harnessing geological barriers, modeling leaks through cement, and quantifying methane emissions from oil &amp; gas wells. He has extensive expertise in: Well integrity, cementing, corrosion, upstream oil &amp; gas (drilling, completion), carbon capture and storage, mathematical modeling, risk management, reliability, HSSE (health/safety/security/environment), asset integrity, management systems, sustainable development, project management, portfolio management, training, and technology development and innovation. He has personally worked on CCS projects in Europe (France, Germany, Netherlands, Norway), Algeria, Japan and USA.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Partial list of companies that have benefited from the trainer&#39;s expertise: </strong></p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Vermilion Energy</li>
<li fr-original-style="" style="box-sizing: border-box;">Geostock</li>
<li fr-original-style="" style="box-sizing: border-box;">Aker BP</li>
<li fr-original-style="" style="box-sizing: border-box;">Shell</li>
<li fr-original-style="" style="box-sizing: border-box;">Statoil</li>
<li fr-original-style="" style="box-sizing: border-box;">ENI</li>
<li fr-original-style="" style="box-sizing: border-box;">TNO</li>
<li fr-original-style="" style="box-sizing: border-box;">Geogreen</li>
<li fr-original-style="" style="box-sizing: border-box;">Wintershall</li>
<li fr-original-style="" style="box-sizing: border-box;">Archer</li>
<li fr-original-style="" style="box-sizing: border-box;">INA and many more</li>
</ul>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Recent CCS consulting track record:</strong></p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Schlumberger</li>
<li fr-original-style="" style="box-sizing: border-box;">Total</li>
<li fr-original-style="" style="box-sizing: border-box;">Oxand</li>
<li fr-original-style="" style="box-sizing: border-box;">TNO</li>
<li fr-original-style="" style="box-sizing: border-box;">THREE60 Energy and others</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &#39;One to One&#39; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;">
Request for further information post training support and fees applicable</p>
</div>
</div>
</div><div fr-original-style="" style="box-sizing: border-box;"><div fr-original-style="" style="box-sizing: border-box;">

<br fr-original-style="" style="box-sizing: border-box;"></div>
<div id="collapseSeven" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
               </div>
</div>
</div>
</div>
</section>

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>The smart meter or smart grid represents the next-generation electrical power system. This system uses information, data &amp; communication technology within generation, delivery and consumption of electric energy. This 4-day course will equip you with the innovations that are shaping the power generation and distribution systems and will cover topics ranging from Smart Metering Architecture, Cybersecurity, Smart Grid Systems and Power Line Communications.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><span>By participating in this course, you will be able to:</span></p>
<ul>
<li><span>Comprehend the Smart Grid and Smart Meters architecture</span></li>
<li><span>Review latest trends and challenges within the Smart Grid Technology</span></li>
<li><span>Perform analysis on smart electronic meters</span></li>
<li><span>Comply with regulatory and metering standards</span></li>
<li><span>Recognize the importance of cybersecurity in smart grids</span></li>
<li><span>Maximize efficiency, reliability, and longevity of your smart meters and equipment</span></li>
<li><span>Gain valuable insights into power quality and harmonics</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p><span>This course will greatly benefit the following groups but not limited to:</span></p>
<ul>
<li><span>Smart Grid managers and engineers</span></li>
<li><span>Smart Meters managers and engineers</span></li>
<li><span>Power plant managers</span></li>
<li><span>Outage managers</span></li>
<li><span>Maintenance and operations engineers</span></li>
<li><span>Power regulatory personnel</span></li>
<li><span>Transmission managers and engineers</span></li>
<li><span>Distribution managers and engineers</span></li>
<li><span>IT managers</span></li>
<li><span>Renewable energy managers and engineers</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.</span></p>
<p><em><span>Course Duration: 4 days in total (28 hours).</span></em></p>
<p><strong><span>Training Schedule</span></strong></p>
<p><span>0830 - Registration </span><span>0900 - Start of training </span><span>1030 - Morning Break </span><span>1045 - Training recommences </span><span>1230 - Lunch Break </span><span>1330 - Training recommences </span><span>1515 - Evening break </span><span>1530 - Training recommences </span><span>1700 - End of Training</span></p>
<p><span>The maximum number of participants allowed for this training course is 25.</span></p>
<p><span>This course is also available through our Virtual Instructor Led Training (VILT) format.</span></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><span>Your expert course leader is a professional engineer with extensive experience in power system studies, substation design field-testing, and EHS programs settings for Mining and Electrical Utilities sectors. He was formally the Engineering Manager at GE Canada in Ontario. He received his M.Sc. in electrical engineering from the University of New Brunswick and his MBA from Laurier School of Business in Waterloo.</span> <span>He has managed and executed more than 150 engineering projects on substation design EMF audits and power system studies and analyses, EMF audits and grounding audits, for major electrical utilities, mines, oil and gas, data centers, industrial and commercial facilities in Canada and the U.S. He is a certified professional engineer in the provinces of Ontario and Alberta.</span></p>
<p><span>He has various IEEE publications, has served as a technical reviewer for many IEEE journals in power systems and control systems, and is the chair of the Industry Application Chapter (IAS) for IEEE Toronto Section. He remains a very active member for the IEEE substation committee of IEEE Std. 81 ground testing (WGE6) and IEEE Std. 80 ground design (WGD7). A certified electrical safety trainer by GE Corporate and a Canadian Standard Association (CSA) committee member at the mining advisory panel for electrical safety, he also taught many technical courses all over Canada to industrial customers, electrical consultants as well as to electrical utilities customers.</span></p>
<p><span>Highlighted Projects:</span></p>
<ul>
<li><span>Various Power System Studies for 345/230 kV Stations - Nova Scotia Power (EMERA)</span></li>
<li><span>RF audits for Telecom tower and antennas - Cogeco/Rogers Mobile</span></li>
<li><span>Power System analysis - Powell Canada</span></li>
<li><span>Structural/Geotechnical Design and upgrades - Oakville Hydro</span></li>
<li><span>Underground Cables testing and sizing - Plan Group</span></li>
<li><span>Relay programming and design optimization - Cenovus Canada</span></li>
<li><span>Different Arc Flash Analysis and BESS Design - SNC Lavalin</span></li>
<li><span>Environmental site assessment (ESA) Phase I/II for multiple stations - Ontario</span></li>
<li><span>Electromagnetic compatibility (EMC) assessment for Toronto LRT expansion - MOSAIC</span></li>
<li><span>Battery energy storage system (BESS) installation at City of London - Siemens Canada</span></li>
<li><span>EMF audits for 500 kV Transmission Lines - Hydro One</span></li>
<li><span>EMF audits for 500 kV Transmission Lines - Hydro Quebec</span></li>
<li><span>AC interference for 138 kV line modeling and mitigations - HBMS Mine</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Smart Metering & Power Quality Analytics

Wolverhampton

<div style="color: rgb(34, 34, 34); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style="color: rgb(64, 64, 64);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Foundation Botulinum Toxin and Dermal Fillers Course</strong></span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><br fr-original-style="" style="box-sizing: border-box;"></span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);">Hamilton Fraser recognised Academy and CPD registered!</span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><br fr-original-style="" style="box-sizing: border-box;"></span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Individual Course</strong></span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);">One to one training</span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);">Duration: One day</span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);">Price: &pound;2,500</span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><br fr-original-style="" style="box-sizing: border-box;"></span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Shared Course</strong></span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);">Up to four delegates</span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);">Duration: One day</span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);">Price: &pound;1,500 per person</span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><br fr-original-style="" style="box-sizing: border-box;"></span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);">Course Content:</span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Anatomy&nbsp;and Physiology</li><li fr-original-style="" style="box-sizing: border-box;">Complications Management</li><li fr-original-style="" style="box-sizing: border-box;">Foundation Botox (3 areas) theory and practical on live models</li><li fr-original-style="" style="box-sizing: border-box;">Foundation Dermal fillers theory and practical on live models (Lips, Nasolabial Folds &amp; Marionettes)</li><li fr-original-style="" style="box-sizing: border-box;">Prescriber access</li><li fr-original-style="" style="box-sizing: border-box;">Help setting up your business</li><li fr-original-style="" style="box-sizing: border-box;">Certificate of completion</li><li fr-original-style="" style="box-sizing: border-box;">Ongoing support</li><li fr-original-style="" style="box-sizing: border-box;">Free emergency kit</li><li fr-original-style="" style="box-sizing: border-box;">Discount code for reduced prices of aesthetic products at select pharmacies</li></ul>Still not feeling confident after the course? Kat, our lead trainer, is available to attend your clinic for the day to shadow you, overseeing your treatments and advising where necessary. This is available for previous delegates only.</span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><br fr-original-style="" style="box-sizing: border-box;"></span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);">Price: &pound;500 per day</span></div><div style="color: rgb(34, 34, 34); box-sizing: border-box;" fr-original-style="color: rgb(34, 34, 34);"><span style="color: rgb(64, 64, 64); box-sizing: border-box;" fr-original-style=" color: rgb(64, 64, 64);"><br fr-original-style="" style="box-sizing: border-box;">To register your interest, please email&nbsp;<a href="mailto:info@dollaesthetics.co.uk" target="_blank" style="color: rgb(17, 85, 204); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style="color: rgb(17, 85, 204);">info@dollaesthetics.co.uk</a>&nbsp;with your full name, medical experience/qualifications and a contact number. Your PIN will be required to verify your suitability for the course. A member of the team will then be in touch in due course.</span></div>

Doll Aesthetics Training Academy Wolverhampton

Foundation level course available to medical professionals only, covering administration of Botulinum Toxin and Dermal Fillers

Foundation Botulinum Toxin & Dermal Fillers Course

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p><strong>Business Impact:</strong> The main aim is to provide insight and understanding of data analytics and machine learning principles through applications. Field data is used to explain data-analysis workflows. Using easy to follow solution scripts, the participants will assess and extract value from the data sets. Hands-on solution approach will give them confidence to try out applicable techniques on data from their field assets.</p>
<p>Data analysis means cleaning, inspecting, transforming, and modeling data with the goal of discovering new, useful information and supporting decision-making. In this hands-on 2-day training course, the participants learn some data analysis and data science techniques and workflows applied to petroleum production (specifically artificial lift) while reviewing code and practicing. The focus is on developing data-driven models while keeping our feet closer to the underlying oil and gas production principles.</p>
<p><strong>Unique Features:</strong></p>
<ul>
<li><strong><em>Eight business use cases</em></strong> covering their business impact, code walkthroughs for most all and solution approach.</li>
<li><strong><em>Industry data sets</em></strong> for participants to practice on and take home.</li>
<li>No software or complicated Python frameworks required.</li>
</ul>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>After the completion of this training course, participants will be able to:</p>
<ul>
<li>Understand digital oil field transformation and its impact on business</li>
<li>Examine machine learning methods</li>
<li>Review workflows and code implementations</li>
<li>After completing the course, participants will have a set of tools and some pathways to model and analyze their data in the cloud, find trends, and develop data-driven models</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This training course is suitable and will greatly benefit the following specific groups:</p>
<ul>
<li>Artificial lift, production and facilities engineers and students to enhance their knowledge base, increase technology awareness, and improve the facility with different data analysis techniques applied on large data sets</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
<li>Advanced</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>The course discusses several business use-cases that are amenable to data-driven workflows. For each use case, the instructor will show the solution using a data analysis technique with Python code deployed in the Google cloud. Trainees will solve a problem and tweak their solution.</span></p>
<p><em><span>Course Duration: 2 days in total (14 hours).</span></em></p>
<p><strong><span>Training Schedule</span></strong></p>
<p><span>0830 - Registration </span><span>0900 - Start of training </span><span>1030 - Morning Break </span><span>1045 - Training recommences </span><span>1230 - Lunch Break </span><span>1330 - Training recommences </span><span>1515 - Evening break </span><span>1530 - Training recommences </span><span>1700 - End of Training</span></p>
<p><span>The maximum number of participants allowed for this training course is 20.</span></p>
<p>This course is also available through our Virtual Instructor Led Training (VILT) format.</p>
<p><strong>Prerequisites:</strong></p>
<ul>
<li>Understanding of petroleum production concepts</li>
<li>Knowledge of Python is not a must but preferred to get the full benefit.</li>
<li>The training will use the Google Collaboratory environment available in Google-Cloud for hands-on exercises</li>
<li>Trainees will need to bring a computer with a Google Chrome browser and a Google email account (available for free)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has over 35 years' work-experience in multiphase flow, artificial lift, real-time production optimization and software development/management. His current work is focused on a variety of use cases like failure prediction, virtual flow rate determination, wellhead integrity surveillance, corrosion, equipment maintenance, DTS/DAS interpretation. He has worked for national oil companies, majors, independents, and service providers globally. He has multiple patents and has delivered a multitude of industry presentations. Twice selected as an SPE distinguished lecturer, he also volunteers on SPE committees. He holds a Bachelor's and Master's in chemical engineering from the Gujarat University and IIT-Kanpur, India; and a Ph.D. in Petroleum Engineering from the University of Tulsa, USA.</p>
<p><strong>Highlighted Work Experience: </strong></p>
<ul>
<li>At Weatherford, consulted with clients as well as directed teams on digital oilfield solutions including LOWIS - a solution that was underneath the production operations of Chevron and Occidental Petroleum across the globe.</li>
<li>Worked with and consulted on equipment's like field controllers, VSDs, downhole permanent gauges, multiphase flow meters, fibre optics-based measurements.</li>
<li>Shepherded an enterprise-class solution that is being deployed at a major oil and gas producer for production management including artificial lift optimization using real time data and deep-learning data analytics.</li>
<li>Developed a workshop on digital oilfield approaches for production engineers.</li>
</ul>
<p><strong>Patents:</strong></p>
<ul>
<li>Principal inventor: 'Smarter Slug Flow Conditioning and Control'</li>
<li>Co-inventor: 'Technique for Production Enhancement with Downhole Monitoring of Artificially Lifted Wells'</li>
<li>Co-inventor: 'Wellbore real-time monitoring and analysis of fracture contribution'</li>
</ul>
<p><strong>Worldwide Experience in Training / Seminar / Workshop Deliveries:</strong></p>
<ul>
<li>Besides delivering several SPE webinars, ALRDC and SPE trainings globally, he has taught artificial lift at Texas Tech, Missouri S&amp;T, Louisiana State, U of Southern California, and U of Houston.</li>
<li>He has conducted seminars, bespoke trainings / workshops globally for practicing professionals:
<ul>
<li><u>Companies:</u> Basra Oil Company, ConocoPhillips, Chevron, EcoPetrol, Equinor, KOC, ONGC, LukOil, PDO, PDVSA, PEMEX, Petronas, Repsol, , Saudi Aramco, Shell, Sonatrech, QP, Tatneft, YPF, and others.</li>
<li><u>Countries:</u> USA, Algeria, Argentina, Bahrain, Brazil, Canada, China, Croatia, Congo, Ghana, India, Indonesia, Iraq, Kazakhstan, Kenya, Kuwait, Libya, Malaysia, Oman, Mexico, Norway, Qatar, Romania, Russia, Serbia, Saudi Arabia, S Korea, Tanzania, Thailand, Tunisia, Turkmenistan, UAE, Ukraine, Uzbekistan, Venezuela.</li>
<li>Virtual training provided for PetroEdge, ALRDC, School of Mines, Repsol, UEP-Pakistan, and others since pandemic.</li>
</ul>
</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Data Analytics Workflows for Artificial Lift, Production and Facility Engineers

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong><em> </em></h2>
<p>This 3 full-day course covers the design of systems for natural gas handling and treatment from the wellhead to the gas processing plant to achieve marketable products that meet desired product specifications.</p>
<p>This course will emphasize on field handling equipment and separation systems, dehydration, fluid measurement, sampling and analysis as well as introduction into reciprocating and centrifugal compressors. It will comprise interactive presentations including exercises/quizzes.</p>
<p>This course can also be offered through Virtual Instructor Led Training (VILT) format.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>At the end of the course, the participants will be able to describe and explain the following:</p>
<ul>
<li>Gas processing principles of dehydration (water removal) by absorption, adsorption, refrigeration and low temperature separation (JT effect) and basic associated equipment</li>
<li>Gas processing in-depth by absorption using glycol and glycol proper (Pre- Cooling requirements, Dew Point control and related processes). Glycol regeneration including principles of stripping, DRIZO and Coldfinger.</li>
<li>Process equipment involved for water removal by absorption. (Knock out drums; Contactor - absorber and internals, heat exchangers, re-boilers, pumps, filters and glycol storage).</li>
<li>Principles of gas metering and types of meter (Measurement Units (MJ, BTU, nM3, scf and conversions).</li>
<li>Typical gas contracts &amp; sales specifications.</li>
<li>Gas pipeline operations.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>Production and processing personnel involved with natural gas and associated liquids to acquaint or reacquaint themselves with gas conditioning and processing unit operations. This course is for <strong>production operations engineers, operations field supervisors, facility engineers, process engineers, design engineers, operations personnel and others who select, design, install, evaluate or operate gas processing plants and related facilities</strong>.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has more than 25 years of accumulated experience in the Oil &amp; Gas Industry, particularly in LNG / Offshore LNG Industry as Project Manager (8 years) and Process Technology Design (12 years). From 2010 to 2012, he worked for TOTAL E&amp;P as Manager of R&amp;D activities related to LNG, FLNG, Gas Treatment and Safety Engineering. From 1992 to 2010, he worked for Technip, spending 12 years (1992 to 2004) in the Process and Technology Division, where he was the Principal Engineer on gas treatment and LNG projects such as Yemen LNG and Nigeria LNG. From 2004 to 2010, he was actively involved in the development of Technip Offshore LNG technologies as Project Manager - several patents filed, author or co-author of different publications on LNG transfer technologies.</p>
<p>He has also been a member of:</p>
<ul>
<li>the Foreign Advisory Committee on the 2nd Trondheim Technology Gas Conference, Norway, 2-3 November 2011</li>
<li>the Steering Committee on the SPE Forum 'Economic and Sustainability Challenges in the Future Development of Sour Gas', Bali, Indonesia, 8-13 May 2011</li>
<li>The Technip 'Experts Network' as 'Main Expert - LNG' for several years</li>
</ul>
<p>He holds a 'summa cum laude' master's degree in Chemical Engineering from Rome University 'La apienza' (1992) and has been a member of the Italian Register of Engineers.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Gas Conditioning and Processing

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans. This course provides also a comprehensive explanation of all boiler combustion control systems including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system as well as their tuning methods. All boiler control systems are covered as well in this course including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, boiler-turbine coordinated control, etc.</p>
<p>The course provides also detailed explanation of Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code). The burner management systems (BMS) and examples of boiler permissive starting logic and protective tripping logic will be explained thoroughly. The various methods used to calculate the boiler efficiency are covered in detail in this course including the direct and indirect methods. All the factors which affect the efficiency and emissions of pulverized coal boiler and CFB boiler will be explained thoroughly.</p>
<p>The course covers also all the methods used to improve the efficiency of pulverized coal boilers and CFB boilers including improvement to their combustion efficiency and control systems performance.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Boiler Combustion Equipment and Systems:</span></strong><span> Gain an in-depth understanding of all boiler combustion equipment and systems including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans</span></li>
<li><strong><span>Boiler Combustion Control Systems:</span></strong><span> Gain a thorough understanding of all boiler combustion control systems for pulverized coal boilers, and CFB boilers including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system</span></li>
<li><strong><span>Boiler Conventional Control Systems:</span></strong><span> Gain an in-depth understanding of all boiler conventional control systems including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, and boiler-turbine coordinated control</span></li>
<li><strong><span>Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code):</span></strong><span> Learn about NFPA 85 code and ANSI/ISA-77-44-01-2007 code</span></li>
<li><strong><span>Burner Management System and Boiler Permissive Starting Logic and Protective Tripping Logic:</span></strong><span> Gain an in-depth understanding of burner management system and boiler permissive starting logic and protective tripping logic</span></li>
<li><strong><span>Boiler Efficiency Calculations:</span><span> Learn how to calculate the boiler efficiency using the direct and indirect methods</span></strong></li>
<li><strong><span>Factors Affecting the Efficiency and Emissions of Boilers: </span></strong><span>Understand all the factors which affect the boiler efficiency and emissions</span></li>
<li><strong><span>Methods Used to Improve the Efficiency of Boilers:</span></strong><span> Learn about all the methods used to improve the efficiency of pulverized coal boilers, and CFB boilers including improvement to their combustion efficiency and control systems performance</span></li>
<li><strong><span>Boiler Instrument and Piping Diagrams:</span></strong><span> Gain an in-depth understanding of all boiler instrument and piping diagrams</span></li>
<li><strong><span>CFB and Pulverized Coal Boilers Equipment and Systems:</span></strong><span> Learn about various types of equipment and systems used in CFB and pulverized coal boilers including economizers, steam drum, superheaters, air preheaters, ammonia injection systems, etc.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>COMBUSTION ENGINEERING FOR COAL FIRED POWER PLANTS MANUAL (includes practical information about combustion engineering for coal fired power plants - 550 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Combustion Engineering for Coal Fired Power Plants

Everything is energy. This is a simple scientific fact. When our energy is flowing and we are in harmony with ourselves, our world reflects this same harmony. Yet so few of us work in harmony with our energies. We question why we suffer the same problems over and over again. We wonder why we work on ourselves yet still don't seem to see the progress we would like. 
The answer could well lie within your energy.
There are seven main energy centres, or chakras, within our personal energy field that govern different areas of your life. In cleansing and healing each chakra, you open yourself up to cleansing and healing the associated aspect of your life. You clear physical and emotional blocks to free your energies to flow and bring in success, joy, and love. 
As you progress through this 9-week energy healing journey, you will learn about each chakra. You will discover where each one is located in your energetic body as well as what each is associated with so you can connect with that chakra more effectively. You'll discover how your chakras are affecting your health, your relationships, your career, and all other areas of your life. 
Each workshop will start by reflecting on your experience so far and thinking about what you would like to achieve over the next seven days.
We will cover various exercises and activities in the session for you to do throughout the week to continue to work with your energies. You can choose what  you would like to do moving forward to support each chakra. In addition, there are daily journal prompts for you to do first thing in the morning and last thing at night. This is your opportunity to note down your experiences and insights and explore the energy of each chakra in more depth. 
You can do the same activities all week or you can switch things up and do something different every day. This is YOUR journey, so choose what feels right to you. 
If you’re still unsure which ones to do, Thea is available via email for guidance throughout the week. 
In the first week, we will assess your current state of being to establish the baseline you’re working from. This is where you see where you are in this moment so you can compare your progress at the end of the course.  This week is also a useful introduction to establishing the routine you’re going to follow throughout the course. It will help you develop the habit of journaling morning and night and deciding when is good for you to do your chosen activities. You may like to do these first thing in the morning before or after journaling; at some point during the day when you have some time to yourself; or in the evening before you reflect on your day in the journal. 
The second week of the course is when we progress to working with the chakras, starting with the root chakra. We will spend a week connecting with the root chakra and working to free up any blocked or stagnant energy so it’s clear and the energy flowing before you move on to the sacral. After a week with the sacral chakra, we’ll then move up to the solar plexus and so on and so on. 
In the ninth and final week of the course you’ll reflect on your progress and look at the changes you’ve experienced over the past few weeks. You’ll check in with each chakra and notice how it feels now compared to when you started. You’ll be given exercises you can do moving forward to keep you connected to your personal flow of energy so you can identify and clear any blocks before they can cause any problems. 
When you’ve finished, you may feel there’s more work you need to do. Replays will be available to all attendees, so you can go back and focus on the chakra(s) you think need extra support or simply go back to the beginning and start the process all over again!
Everyone who signs up for the course will receive a free copy of the accompanying workbook so they have a personal record of their experience of the course. 

Neptune's Daughter Ltd

Online Course Creation

Holistic Therapy

Spiritual Healing

Energy Healing

Online Education

Join author Thea Faye in this nine week energy healing course. Clear your chakras, raise your vibration and enjoy holistic harmony and wellbeing! Each attendee will receive a FREE accompanying workbook. 

My Nine Week Energy Healing Journey - An online series of workshops

General Admission

<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">A <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Retreat in Daily Life</strong> is a way to find something of what you might experience on a residential retreat, with the difference being that you are at home, and the prayer experience is woven into the rhythm of your ordinary life.&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">The&nbsp;Contemplative at Home Retreat in Daily Life</strong> involves two components:</p><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Six days per week : Thirty to Forty-five minutes of <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">daily personal prayer</strong>, with suggested meditations and reflection questions.</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">One day per week : A&nbsp;two-hour Zoom call, to share with other pilgrims who are on retreat with you. Lissy hosts these sessions in a <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">group spiritual direction</strong> format.&nbsp;</li></ul><div fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><div fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><div fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who is this for?</strong></div><div fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><div fr-original-style="" style="box-sizing: border-box;">This retreat is suitable for anyone who has (or has had) some kind of practice of Christian prayer, and is ready to explore a bit more of their faith, their prayer life or their relationship with God.&nbsp;</div><div fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><div fr-original-style="" style="box-sizing: border-box;">This might be for you if you</div><ul fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><div id="isPasted" fr-original-style="" style="box-sizing: border-box;">Would like to explore the contemplative prayer traditions of the Christian faith</div></li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><div id="isPasted" fr-original-style="" style="box-sizing: border-box;">Are ready for something deeper in your relationship with God</div></li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><div id="isPasted" fr-original-style="" style="box-sizing: border-box;">Hope to find God in new ways</div></li><li fr-original-style="" style="box-sizing: border-box;"><div fr-original-style="" style="box-sizing: border-box;">Would like some structure and support to help you reinstate a habit of daily prayer</div></li><li fr-original-style="" style="box-sizing: border-box;"><div fr-original-style="" style="box-sizing: border-box;">Would like to go away on retreat, but are unable to at the moment</div></li><li fr-original-style="" style="box-sizing: border-box;"><div fr-original-style="" style="box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Enjoy&nbsp;</span>Contemplative at Home meditations and want to connect&nbsp;with others who do as well</div></li></ul><div fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><div fr-original-style="" style="box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Prayer Material</strong></span></div><div fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><div fr-original-style="" style="box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Meditations from the Contemplative at Home archives are suggested for five days of the week, with an Examen or review practice on the sixth day of the week. Each week follows a slightly different theme.</span></div><div fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><p id="isPasted" style="margin-left: 20px; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="margin-left: 20px;"><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">Week One: Introduction to Contemplative Prayer / Establishing your Routine</span></p><p style="margin-left: 20px; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="margin-left: 20px;"><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">Week Two: Lectio Divina / Listening to Scripture</span></p><p style="margin-left: 20px; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="margin-left: 20px;"><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">Week Three: Imaginative Contemplation / Encoutering Jesus&nbsp;</span></p><p style="margin-left: 20px; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="margin-left: 20px;"><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">Week Four: Praying with the Psalms / My Life in God</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">Prompts for reflection are also provided. Most of the meditations are around twenty minutes in length, with a suggested 15 minutes after the audio&nbsp;meditation for journalling or reflecting on your prayer experience.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Further Details and Commitment</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">The times listed on the sign up link above reflect the time for the group calls. Please be aware of your local time zone. I work in the UK and times may be listed for GMT.&nbsp;&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">There will be one call before the retreat begins, and one at the end of each week, for a total of 5 calls.&nbsp;</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">There will be a maximum of six participants in the group.<br fr-original-style="" style="box-sizing: border-box;"></span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Please check that you are able to attend all of the group sessions before you apply.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The daily prayer can be done at any time that suits you but, if you don&#39;t already have a 30-45 minute window of time devoted to prayer each day, do take some time to think about when you might fit it in, for example: will you wake up earlier? Will you do it at lunch time? in the evening? How realistic is this? &nbsp;Is there a place in your house where you could sit to pray? Will&nbsp;those you share space with will be able to respect your commitment to the retreat?</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This won&#39;t be for everyone, but for those who are drawn to take part in this prayer experience, I have no doubt that it will be a positive and enriching time. I am really looking forward to sharing this space with you.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p>

Contemplative at Home

Contemplative at Home Retreat in Daily Life

<div id="course-pills-1">Duration<p>2 Days</p><p>12 CPD hours</p>This course is intended for<p>The primary audience for this course is any IT, facilities or data centre professional who works in and around the data centre and who has the responsibility to achieve and improve the availability and manageability of the data centre.</p>Overview<p>After completion of the course the participant will be able to:? Choose an optimum site for mission-critical data centre based on current and future needs? Describe all components that are important for high availability in a data centre and how to effectively setup the data centre? Name and apply the various industry standards? Describe the various technologies for UPS, fire suppression, cooling, monitoring systems, cabling standards, etc, and to select and apply them effectively to cost-efficiently enhance the high-availability of the data centre.? Review the electrical distribution system to avoid costly downtime? Enhance cooling capabilities and efficiency in the data centre by using existing and new techniques and technologies for the increased cooling requirements of the future? Design a highly reliable and scalable network architecture and learn how to ensure installers apply proper testing techniques? Create effective maintenance contracts with equipment suppliers ensuring the best return on investment? Setup effective data centre monitoring ensuring the right people get the right message? Ensure proper security measures, both procedural and technical, are established to safeguard your company's valuable information in the data centre</p><p>The course will address how to setup and improve key aspects such as power, cooling, security, cabling, safety, etc., to ensure a high available data centre. It will also address key operations and maintenance aspects.</p></div><div id="course-pills-2"><h4>The Data Centre, it?s Importance and Causes for Downtime</h4><h4>Data Centre Standards and Best Practices</h4><h4>Data Centre Location, Building and Construction</h4><ul><li>Selecting appropriate sites and buildings and how to avoid pitfalls<br />Various components of an effective data centre and supporting facilities setup</li></ul><h4>Raised Floor/Suspended Ceiling</h4><ul><li>Uniform, concentrated and rolling load definitions<br />Applicable standards<br />Raised Floor guidelines<br />Signal Reference Grid, grounding of racks<br />Disability act and regulations<br />Suspended ceiling usage and requirements</li></ul><h4>Light</h4><ul><li>Standards<br />Light fixture types and placement<br />Emergency lighting, Emergency Power Supply (EPS)</li></ul><h4>Power Infrastructure</h4><ul><li>Power infrastructure layout from generation to rack level<br />ATS and STS systems<br />Redundancy levels and techniques<br />Three-phase and single-phase usage<br />Power distribution options within the computer room<br />Power cabling versus bus bar trunking<br />Bonding versus grounding<br />Common Mode Noise and isolation transformers<br />Distribution boards, form factors and IP-protection grades<br />Power quality guidelines<br />Real power versus apparent power<br />How to size and calculate load in the data centre Generators<br />Static and dynamic UPS systems, selection criteria, how they operate and energy efficiency option<br />Battery types, correct selection and testing<br />Thermo-graphics</li></ul><h4>Electro Magnetic Fields</h4><ul><li>Electrical fields and magnetic fields definitions and units of measurements<br />Sources of EMF<br />Effects of EMF on human health and equipment<br />(H)EMP<br />Standards<br />EMF shielding solutions</li></ul><h4>Equipment Racks</h4><ul><li>Rack standards, properties and selection criteria<br />Security considerations<br />Power rail/strip options</li></ul><h4>Cooling Infrastructure</h4><ul><li>Temperature and humidity recommendations<br />Cooling measurement units and conversion rates<br />Sensible and latent heat definitions<br />Differences between comfort and precision cooling<br />Overview of different air conditioner technologies<br />Raised floor versus non-raised floor cooling<br />Placement of air conditioner units and limitations to be observed<br />Supplemental cooling options<br />Cold aisle/hot aisle containment</li></ul><h4>Water Supply</h4><ul><li>Importance of water supply and application areas<br />Backup water supply techniques</li></ul><h4>Designing a Scalable Network Infrastructure</h4><ul><li>The importance of a Structured Cabling System<br />Planning considerations<br />Copper and Fiber cable technology and standards<br />ANSI/TIA-942 Cabling hierarchy and recommendations<br />Testing and verification<br />SAN storage cabling<br />Network redundancy<br />Building-to-building connectivity<br />Network monitoring system requirements</li></ul><h4>Fire Suppression</h4><ul><li>Standards for fire suppression<br />Detection systems<br />Various total flooding fire suppression techniques and systems, their benefits and disadvantages<br />Handheld extinguishers<br />Signage and safety<br />Regulatory requirements and best practices</li></ul><h4>Data Centre Monitoring</h4><ul><li>Data centre monitoring requirements<br />EMS versus BMS<br />Water leak detection systems<br />Notification options and considerations</li></ul><h4>Operational Security and Safety Practices</h4><ul><li>Data centre security layers<br />Physical, infrastructure and organisational security<br />Safety measures and essential signage</li></ul><h4>Labelling</h4><ul><li>Choosing a labelling scheme<br />Recommended labelling practices<br />Network labelling</li></ul><h4>Documentation</h4><ul><li>How to setup proper documentation<br />Document management policies and procedures</li></ul><h4>Cleaning</h4><ul><li>Cleaning practices for the data centre</li></ul><h4>MTBF/MTTR</h4><ul><li>Standards and definitions<br />Calculation models<br />The ?real? value</li></ul><h4>Maintenance Contracts/SLA/OLA</h4><h4>EXAM: Certified Data Centre Professional</h4></div><div id="course-pills-3"><h4>Additional course details:</h4><br /><p>Nexus Humans Certified Data Centre Professional (CDCP) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. </p><p></p> This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. <p></p>Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success.  <p></p>While we feel this is the best course for the Certified Data Centre Professional (CDCP) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you.  <p></p>Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.<p></p></div>

Nexus Human

IT Certifications

Construction Design & Management (CDM)

Certified Cloud Security Professional (CCSP)

AWS Certified Cloud Practitioner

Certified in Data Protection (CDP)

Certified Cyber Professional (CCP)

Certified Data Centre Professional (CDCP)

Bromley

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">ECS Health &amp; Safety Courses&nbsp;</strong>and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.</p><p style="text-align: center; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="text-align: center;"><a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-size: 24px; box-sizing: border-box;" fr-original-style="font-size: 24px;">Learn More @ MJ Electrical Training &gt;&gt;</span></strong></a></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core Day</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why is the ECS Labourer Card Important?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Pathways to the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">1.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route One</strong>: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">2.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route Two</strong>: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety Exemption</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who Should Take This Course?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Benefits of the SPA Health &amp; Safety Core Day</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Comprehensive Training</b>: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Flexible Learning</b>: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Certification</b>: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Further Opportunities with the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Verify and Stay Updated</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Conclusion</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Taking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p>

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Health & Safety

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Kent

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">ECS Health &amp; Safety Courses&nbsp;</strong>and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.</p><p style="text-align: center; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="text-align: center;"><a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-size: 24px; box-sizing: border-box;" fr-original-style="font-size: 24px;">Learn More @ MJ Electrical Training &gt;&gt;</span></strong></a></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core Day</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why is the ECS Labourer Card Important?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Pathways to the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">1.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route One</strong>: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">2.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route Two</strong>: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety Exemption</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who Should Take This Course?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Benefits of the SPA Health &amp; Safety Core Day</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Comprehensive Training</b>: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Flexible Learning</b>: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Certification</b>: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Further Opportunities with the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Verify and Stay Updated</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Conclusion</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Taking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p>

ECS Card Health & Safety Course Bromley

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">ECS Health &amp; Safety Courses&nbsp;</strong>and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.</p><p style="text-align: center; color: var(--text); font-size: var(--font-size); box-sizing: border-box;" fr-original-style="text-align: center;"><a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="font-size: 24px; box-sizing: border-box;" fr-original-style="font-size: 24px;">Learn More @ MJ Electrical Training &gt;&gt;</span></strong></a></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core Day</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Are you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Why is the ECS Labourer Card Important?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Pathways to the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">MJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">1.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route One</strong>: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">2.&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Route Two</strong>: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety Exemption</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Who Should Take This Course?</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Benefits of the SPA Health &amp; Safety Core Day</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Comprehensive Training</b>: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Flexible Learning</b>: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Certification</b>: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Further Opportunities with the ECS Labourer Card</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Obtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Verify and Stay Updated</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">While every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Conclusion</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Taking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p>

ECS Card Health & Safety Course Dover

ECS Card Health & Safety Course Liverpool



Bayfield Training and the University of Cambridge Department of Land Economy
This prestigious eight-week online Real Estate course is suitable for modellers new to Real Estate and experienced Real Estate Analysts looking to formalise their skill set. This course will equip you with skills to start building your own financial models and the certificate will give your employers and colleagues reassurance of your expertise.
If you want to enhance your financial modelling skills over an extended period, the Real Estate Financial Modelling Certificate is the course for you.
This online real estate course has been put together exclusively for the Real Estate Financial Modelling certificate, using state of the art digital resources such as animations, video-steps, digital whiteboard and video-interactions as well as the spreadsheets, text based resources and tutor contact you would expect from any of Bayfield Training’s classroom based courses.
 Assessment is in the form of a guided model build exercise and written model appraisal. Participants benefit from an additional months access to the course platform after submission of the assessment.


On this course you will:
Become a competent model builder, building Real Estate Financial Models from scratch
Learn tricks and concepts from financial modelling experts with decades of experience in practice and academia
Learn how to use Real Estate Financial Models to make informed investment decisions
Learn at a consistent pace over 8 weeks allowing you to take the time to fully grasp this important skill
This course is suitable for:
Chartered Surveyors
Asset Managers
Financial Controllers
Financial Analysts
Investment Managers
Property Managers
Real Estate Students/Recent Graduates
Course Outline:
Module 1 - Economic Context
Introduction to Real Estate Asset Modelling and how it relates to and is distinct from Econometric Models.
Introduction to Real Estate Asset Modelling and how it relates to and is distinct from Econometric Models.
Why Real Estate Asset Modelling is important
Understanding the occupier, asset and development markets and the relevant modelling approaches for each
Real Estate Sub-Sector Key Performance Indicators
Introduction to conventional valuations and financial mathematics
Understanding and minimising errors in Financial Models


Module 2 - Cash Flow Fundamentals
Constructing a financial model from first principles.
Understanding all the components of a basic cash flow model
Understand why Corporate Finance Models and Real Estate Models are different
Financial Model Design
Making the link between valuations, income mathematics and discounted cash flows
Internal Rate of Return, Net Present Value,Worth and other metrics
Features and techniques to aid fast model building


Module 3 - Developing the Cash Flow
Adapting financial models for different periodicities and building rent functions for different rent behaviour.
Understanding how leases vary with respect to rent over time: Rent Reviews, Break Clauses, Rent Free Periods, Lease Expiries etc.
Developing the concept of a Rent Function in Excel
Logic mathematics and Logic functions
Projecting rent to adapt to different lease contracts and growth patterns
Alternative solutions to Logic functions
Comparative analysis of lease structures in different jurisdictions and adapting financial models


Module 4 - Real Estate Data
Understanding the different sources of data, constructing basic time series models and recognising basic patterns.
Key Property market indicators
Characteristics and application of key input metrics for Real Estate Appraisals
Understanding the eight components of Real Estate Price Dynamics
Awareness of the different sources of data
Reading and using general property market reports
Constructing basic time series models and recognising basic patterns


Module 5 - Development Appraisals
Constructing a development appraisal from first principles and understanding development return metrics.
Understanding the key components of a development project
Understanding the difference between development and investment appraisals
Residual Appraisals and Profit Calculations
Cost orientated cash flows and phased sales
Cumulative construction cost patterns: incidental, fixed, loaded and S-curve
Development return metrics and Modified IRRs


Module 6 - Multi-let Cash Flows
Constructing an advanced multi-let cash flow model and learn different techniques to build flexible rent functions.
Multi-let and portfolio model design principles
Building complex date functions and date series
The three multi-let rent projection techniques
Perpendicular Rent Functions
Incorporate advanced rent adjustments into the Rent Function
Incorporate sector and period varying rental growth rates
Simplifying OPEX and CAPEX projections
Discounting techniques on complex and volatile cash flows


Module 7 - Project Finance
Constructing a flexible Real Estate Debt Finance model.
Revision of the Mathematics of amortisation and debt finance
Basic senior debt models and geared net cash flow
LTV, IRR and Interest Rate Dynamics
Flexible term, repayment options and deferred interest
Loan covenant tests
Understanding different tranches of debt
Understanding how complex debt structures impact the returns to different parties


Module 8 - Model Interpretation and Risk Analysis
Learn how to read, analyse and report on real estate financial models.
Understand how to read models and develop an investment narrative
Visualise model outputs using graph functions, conditional formatting, dynamic symbols and dashboards
Learn how to use built-in Sensitivity, Scenario Analysis tools and third-party add-ins
Learn how to construct varied project scenarios in a systematic way
Introduction to Monte Carlo Analysis and VBA
Optimising sale dates and other parameters
Create well written, attractive and persuasive reports


Included in the Course
Bayfield Training and University of Cambridge Accredited Certificate & LinkedIn Proficiency Badge
64 CPD Hours
1 Month Post-Course Access to the Digital Platform - 12 Months Post-Course Access to the Platform can be purchased for an additional fee
Course Files
Q&A Webinars and Guest Speaker Webinars
Further Learning Resources (Reading, Files and Videos)
Post Course Support - Two Months of Questions & Answers


2024 Cohort Dates Include:
3rd June to 29th July
5th August to 25th September 2024
30th September to 25th November


For more information, please contact Sam on the Bayfield Training Sales team:
E - s.musgrave@bayfieldtraining.com
T - 01223 517851
W - www.bayfieldtraining.com

Bayfield Training

Financial Modelling & Analysis

Real Estate Finance

Financial Modelling

Microsoft Excel

Professional Development

Continuous Professional Development (CPD)

University of Cambridge & Bayfield Training - Real Estate Financial Modelling Certificate (Online Self-Study)

ECS Card Health & Safety Course Newcastle

<span data-canva-clipboard="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" id="isPasted" fr-original-style="" style="box-sizing: border-box;"></span><span data-canva-clipboard="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" id="isPasted" fr-original-style="" style="box-sizing: border-box;"></span><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Are you a newly qualified homeopath/therapist or in your 1st year of business? Are you confused and overwhelmed, trying to build a thriving busy practice?</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Want to learn from someone who&rsquo;s been in your shoes just 5yrs ago? I was once where you are now, and I&#39;ve made expensive mistakes! You get to learn from these and my experience of building my thriving practice over 5 years! I will drown out the noise and BS, lead you by the hand and show you what to do. &nbsp;Get the basics right from the start so you don&#39;t make expensive mistakes (learn from my mistakes!) Small investment that will save you time and money in the long run Small intimate groups mean the advice is targeted to individuals, and each person has direct access to me Beginner to Boss is a 12 week online programme which gently takes you by the hand and cuts through the noise to teach you the basics of business.</p><span data-canva-clipboard="ewAiAGEAIgA6ADUALAAiAGgAIgA6ACIAdwB3AHcALgBjAGEAbgB2AGEALgBjAG8AbQAiACwAIgBjACIAOgAiAEQAQQBHAE4ARQBIAGEAMAA3ADAAdwAiACwAIgBpACIAOgAiAFEAVgAwAG4AMgBDAHQAawBXAFQAcABpAEQAQgA4AFEAOABlAFMAcgBtAEEAIgAsACIAYgAiADoAMQA3ADIAMgA5ADMAMgA2ADcANQA2ADIANgAsACIAQQA/ACIAOgAiAEIAIgAsACIAQQAiADoAWwB7ACIAQQAiADoAMQAxADcAMQAuADYAOQAwADMANwA5ADYAMgAyADEAOAAxACwAIgBCACIAOgA2ADcAMgAuADgANwAyADIAMQAxADQAOQA1ADQAOAA0ADkALAAiAEQAIgA6ADEAMAA0ADAALgA2ADgAOQA4ADYAOAA1ADYANAAxADEAOAA4ACwAIgBDACIAOgA0ADkAMQAuADkANAA2ADIANgA2ADQAMAAxADgAOQAyADcAMwAsACIAQQA/ACIAOgAiAEsAIgAsACIAYQAiADoAewAiAEEAIgA6AFsAewAiAEEAPwAiADoAIgBCACIALAAiAEEAIgA6ADkANgA1AH0ALAB7ACIAQQA/ACIAOgAiAEEAIgAsACIAQQAiADoAIgBXAGgAYQB0ABkgcwAgAGkAbgBjAGwAdQBkAGUAZAA/AFwAbgAtACAANgAgAHQAZQBhAGMAaABpAG4AZwAgAHMAZQBzAHMAaQBvAG4AcwAgACgAMQBoAHIAKQAgAGMAbwB2AGUAcgBpAG4AZwA6ACAAcwB5AHMAdABlAG0AcwAsACAAbQBhAHIAawBlAHQAaQBuAGcALAAgAGYAaQBuAGEAbgBjAGUAcwAgAGEAbgBkACAAYgBvAHUAbgBkAGEAcgBpAGUAcwBcAG4ALQAgADYAIABpAG0AcABsAGUAbQBlAG4AdABhAHQAaQBvAG4AIABzAGUAcwBzAGkAbwBuAHMAIAAoADEAaAByACkAIAB3AGgAZQByAGUAIAB5AG8AdQAgAGgAYQB2AGUAIABhACAAYwBoAGEAbgBjAGUAIAB0AG8AIABhAHMAawAgAG0AZQAgAHEAdQBlAHMAdABpAG8AbgBzACwAIABsAGUAYQByAG4AIABmAHIAbwBtACAAeQBvAHUAcgAgAHAAZQBlAHIAcwAsACAAZwBlAHQAIABhAGMAYwBvAHUAbgB0AGEAYgBpAGwAaQB0AHkAIABhAG4AZAAgAGMAbwBuAHMAbwBsAGkAZABhAHQAZQAgAHkAbwB1AHIAIABsAGUAYQByAG4AaQBuAGcALgBcAG4ALQAgAEEAbABsACAAcwBlAHMAcwBpAG8AbgBzACAAdABvACAAYgBlACAAcgBlAGMAbwByAGQAZQBkACAAYQBuAGQAIABhAGMAYwBlAHMAcwBpAGIAbABlACAAdABvACAAcABhAHIAdABpAGMAaQBwAGEAbgB0AHMALgBcAG4ALQAgAEEAYwBjAGUAcwBzACAAdABvACAAYQAgAHAAcgBpAHYAYQB0AGUAIABGAEIAIABnAHIAbwB1AHAAIAB3AGgAZQByAGUAIABJACAAdwBpAGwAbAAgAGIAZQAgAGwAaQB2AGUAIABlAGEAYwBoACAAdwBlAGUAawAgAHQAbwAgAGEAbgBzAHcAZQByACAAcQB1AGUAcwB0AGkAbwBuAHMAXABuAC0AIABNAGEAcwB0AGUAcgBtAGkAbgBkACAAdwBoAGkAYwBoACAAdwBpAGwAbAAgAG4AbwB0ACAAYgBlACAAdABoAGkAcwAgAGcAbwBvAGQAIAB2AGEAbAB1AGUAIABlAHYAZQByACAAYQBnAGEAaQBuAFwAbgAtACAAQQBjAGMAZQBzAHMAIAB0AG8AIABkAGkAcwBjAG8AdQBuAHQAZQBkACAAMQAyADEAIABtAGUAbgB0AG8AcgAgAHMAZQBzAHMAaQBvAG4AcwAgAGEAdAAgAGUAbgBkACAAbwBmACAAcAByAG8AZwByAGEAbQBtAGUALgAiAH0ALAB7ACIAQQA/ACIAOgAiAEIAIgAsACIAQQAiADoAMgA1ADkAfQAsAHsAIgBBAD8AIgA6ACIAQQAiACwAIgBBACIAOgAiAFwAbgAiAH0AXQAsACIAQgAiADoAWwB7ACIAQQA/ACIAOgAiAEEAIgAsACIAQQAiADoAewAiAGYAbwBuAHQALQBzAGkAegBlACIAOgB7ACIAQgAiADoAIgA0ADAALgAwACIAfQAsACIAZgBvAG4AdAAtAGYAYQBtAGkAbAB5ACIAOgB7ACIAQgAiADoAIgBZAEEARgBjAGYAcgBnAGwAcABWAEEALAAwACIAfQAsACIAZgBvAG4AdAAtAHcAZQBpAGcAaAB0ACIAOgB7ACIAQgAiADoAIgBuAG8AcgBtAGEAbAAiAH0ALAAiAGYAbwBuAHQALQBzAHQAeQBsAGUAIgA6AHsAIgBCACIAOgAiAG4AbwByAG0AYQBsACIAfQAsACIAdABlAHgAdAAtAGEAbABpAGcAbgAiADoAewAiAEIAIgA6ACIAYwBlAG4AdABlAHIAIgB9ACwAIgBjAG8AbABvAHIAIgA6AHsAIgBCACIAOgAiACMAMAAwADAAMAAwADAAIgB9AH0AfQAsAHsAIgBBAD8AIgA6ACIAQgAiACwAIgBBACIAOgAxADcANAAxAH0ALAB7ACIAQQA/ACIAOgAiAEEAIgAsACIAQQAiADoAewAiAGYAbwBuAHQALQBzAGkAegBlACIAOgB7AH0ALAAiAGYAbwBuAHQALQBmAGEAbQBpAGwAeQAiADoAewB9ACwAIgBmAG8AbgB0AC0AdwBlAGkAZwBoAHQAIgA6AHsAfQAsACIAZgBvAG4AdAAtAHMAdAB5AGwAZQAiADoAewB9ACwAIgB0AGUAeAB0AC0AYQBsAGkAZwBuACIAOgB7AH0ALAAiAGMAbwBsAG8AcgAiADoAewB9AH0AfQBdAH0ALAAiAGIAIgA6AHsAIgBBACIAOgBbADEANwAsADcAMQAsADEAMQAsADYAOAAsADYAOQAsADEANQAsADYAMgAsADcAMgAsADEAMAAsADUAOAAsADYANABdAH0ALAAiAGQAIgA6ACIAQQAiACwAIgBlACIAOgAxADIAOAA2AC4AMQA5ADYAMgA0ADMAOQA4ADEANwA5ADkANgAsACIAZgAiADoANgAwADgALAAiAGcAIgA6AGYAYQBsAHMAZQAsACIAaAAiADoAIgBBACIAfQBdACwAIgBCACIAOgAyADQAOAAwACwAIgBDACIAOgAxADcANAA4AH0A" id="isPasted" fr-original-style="" style="box-sizing: border-box;"></span><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">What&rsquo;s included?&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">- 6 teaching sessions (1hr) covering: systems, marketing, finances and boundaries&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">- 6 implementation sessions (1hr) where you have a chance to ask me questions, learn from your peers, get accountability and consolidate your learning.&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">- All sessions to be recorded and accessible to participants.&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">- Access to a private FB group where I will be live each week to answer questions&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">- Mastermind which will not be this good value ever again&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">- Access to discounted 121 mentor sessions at end of programme.</p>

Are you a newly qualified homeopath/therapist or in your 1st year of business? Are you confused and overwhelmed, trying to build a thriving busy practice?
Want to learn from someone who’s been in your shoes just 5yrs ago? I was once where you are now, and I've made expensive mistakes! You get to learn from these and my experience of building my thriving practice over 5 years! I will drown out the noise and BS, lead you by the hand and show you what to do. Get the basics right from the start so you don't make expensive mistakes (learn from my mistakes!) Small investment that will save you time and money in the long run Small intimate groups mean the advice is targeted to individuals, and each person has direct access to me Beginner to Boss is a 12 week online programme which gently takes you by the hand and cuts through the noise to teach you the basics of business.
What’s included? 
- 6 teaching sessions (1hr) covering: systems, marketing, finances and boundaries 
- 6 implementation sessions (1hr) where you have a chance to ask me questions, learn from your peers, get accountability and consolidate your learning. 
- All sessions to be recorded and accessible to participants. 
- Access to a private FB group where I will be live each week to answer questions 
- Mastermind which will not be this good value ever again 
- Access to discounted 121 mentor sessions at end of programme.

Homeopathic Harmony

As a qualified homeopath of 5yrs, I've put together a brilliant offer for newly-qualified homeopaths who know all about remedies but almost nothing about running a successful, busy homeopathy practice. 

Very limited spaces, and the last time it will be this cheap before prices go up. 

You'll get a mix of group learning and direct access to me (learning from my mistakes so you don't have to waste time and money on making the same!). 

568 Courses in Birmingham

Steam Turbine Technology

By EnergyEdge - Training for a Sustainable Energy Future

Commissioning of Electrical Equipment

By EnergyEdge - Training for a Sustainable Energy Future

Electrical Generators, Excitation Systems and Governing Systems

By EnergyEdge - Training for a Sustainable Energy Future

Process Control and Instrumentation

By EnergyEdge - Training for a Sustainable Energy Future

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

By EnergyEdge - Training for a Sustainable Energy Future

Smart Metering & Power Quality Analytics

By EnergyEdge - Training for a Sustainable Energy Future

Foundation Botulinum Toxin & Dermal Fillers Course

By Doll Aesthetics Training Academy Wolverhampton

Data Analytics Workflows for Artificial Lift, Production and Facility Engineers

By EnergyEdge - Training for a Sustainable Energy Future

Gas Conditioning and Processing

By EnergyEdge - Training for a Sustainable Energy Future

Combustion Engineering for Coal Fired Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location