9 Fluid Dynamics courses

Duration 3 Days 18 CPD hours This course is intended for The primary audience for this course is an IT, facilities or data centre operations professional working in and around the data centre and having the responsibility to achieve and improve high-availability and manageability of the data centre. Overview After completion of the course the participant will be able to:? Understand the design life cycle of data centres and the stages involved? Discuss the data centre requirements in great level of detail with vendors, suppliers and contractors to ensure that these requirements are met? Validate design plans, quotes and offers proposed by vendors/contractors? Understand redundancy levels for both the data centre design/setup and maintenance? Understand the various building considerations such as bullet proofing, mitigation of seismic activity, fire ratings and thermal stability? Understand how to install a raised floor that meets requirements, avoiding misalignment, level differences and leakage? Understand how to read a Single Line Electrical Diagram to identify and avoid the most common design issues? Choose the correct UPS and parallel configuration, learn and avoid classic parallel installation mistakes? Understand how to calculate battery banks, validate offered configurations to ensure they meet requirements? Understand what distance to keep to avoid EMF issues for human safety and equipment disturbances? Understand the fundamental cooling setup, CFM, Delta-T and other important factors? Understand contamination factors and limitations? Understand full details of fire suppression options, how to calculate gas content and verify installations? Understand how to measure data centre energy efficiency and how to improve it The course will bring participants to the level of a suitable sparring partner with suppliers. They will be able to verify offers provided by vendors for correctness, effectiveness and efficiency. DATA CENTRE DESIGN/LIFE CYCLE OVERVIEW * Overview of the phases of a data centre life cycle Planning, re-alignment and continuous improvement STANDARDS AND RATING LEVEL DEFINITIONS * Rating level history Difference between Uptime and TIA-942 Rating level definitions Redundancy options (N+1), 2N, 2(N+1) Concurrent Maintainability/Compartmentalisation Example configurations Substation and feed requirements Maintenance options Operational processes guidelines/standards Skill development BUILDING CONSIDERATIONS * Building location considerations Floor and hanging loads requirements Fire rating for walls and glass Blast protection Bullet proofing Forced entry protection ADVANCED RAISED FLOOR & SUSPENDED CEILING * Raised floor installation guidelines Techniques to install a proper and leveled raised access floor Common mistakes Choosing the right tiles and their locations Seismic-mitigating floor constructions Choosing the correct suspended ceiling ADVANCED POWER * Power infrastructure layout; Formulas which you should know for the data centre Single Line Electrical diagrams; how to read to ensure key components are present for protection Over current protection devices (MCB/MCCB/VCB/ACB/Fuses) definitions and what to use where Earth Leakage devices (RCB/RCD/ELCB/GFCI/ALCI/RCBO), definitions and what to use where Sizing of protective components Lightning strikes and surge protection devices (TVSS/SPD), how they operate, where to use and how to install Power cabling and cable run considerations PDU/DB setup and minimum requirements Generators; Generator types: Standy/Prime/Continuous Component make up and functions Fuel storage and calculation Paralleling of gen-sets Generator room/area requirements UPS Systems; Required specifications for UPS systems How to read data sheets and select the correct UPS Requirements for parallel configurations and avoid pitfalls such as single point of failures How parallel installation should be done, classic mistakes made by installers and how to avoid these Harmonic Filters; Active/Passive filters and their application Battery Banks; Battery bank terminology Designing battery banks, how to calculate, and double check the battery bank to be installed Battery charging pitfalls and ensuring the right charger is being installed and used Using parallel battery banks; how to properly install them, limitations and risks when using batteries in parallel How to test batteries correctly and make decisions on cell/block or string replacement Battery casing choices; ABS, V0, V1, V2 Alternative energy storage; flywheel, re-usable cell, compressed air UPS, etc. ADVANCED ELECTRO MAGNETIC FIELDS * Sources of EMF Difference between single, three phase and bus-bar EMF Options available to measure EMF and how to interpret the results from single-axes and composite measurements Guidance on safe distance for equipment and humans Calculation of EMF attenuation factor for shielding material permeability and saturation factors ADVANCED COOLING * Important definitions; dry-bulb, wet-bulb, dew-point, RH, sensible and latent heat Psychometric chart and ASHRAE recommendations Environmental class definitions and thermal specifications Temperature/humidity measurements guideline Heat dissipation methods Altitude impact on temperature intake to ICT equipment Floor plan setup for effective cooling Differences in tile surface and supporting structure and the air-flow performance impact Rack door construction and the flow performance impact Equipment Delta-T and its impact Optimising air flow Thermal units conversions Calculations for air volume displacement (CFM/CMH) Cooling capacity calculations Air-conditioning selection De- / humidifying options Air conditioning efficiency SHR impact on cost saving Efficiency indicator New cooling principle and techniques (Submerged, VSD/VRF/ECF/water- and air side economisers) Redundancy guidelines for air-conditioners avoiding classic misconceptions and mistakes for meeting ANSI/TIA-942 compliant designs Installation requirements Connections to fire panel and EPO Commissioning of air conditioners Set points and calibration CFD (Computational Fluid Dynamics) ADVANCED FIRE PROTECTION * The fire triangle and elements to stop a fire Detection systems in detail (VESDA, VIEW, smoke sensors) Considerations for installation of sensors Proper testing of smoke sensors Water based systems i.e. deluge, wet-pipe, dry-pipe, pre-action and why most of them don't work and how to detect this Details on Inert and Halocarbon systems and how to select the correct system for your data centre How to calculate the gas content ensuring the appropriate level is installed to suppress the fire including safety considerations Other requirements for gas systems such as release times, hold times, pipe install requirements and other important factors Requirements for the fire detection panel Installation verification, methods, what to check and how New advanced fire suppression technologies DESIGN AND INSTALL SCALABLE NETWORKING CABLING SYSTEM * ANSI/TIA942 cabling structure topology ToR, EoR Design Intelligent patching systems Installation best practice such as routing, bending radius, separation from power, containment fill ratio, fiber link loss calculator, bonding and grounding requirement Standard for telecommunications labeling and administration ENVIRONMENTAL SPECIFICATIONS AND CONTAMINATION CONTROL * Acoustic noise effects, regulations, specifications and limits Data centre contaminations and classifications Measurements, standards and limits Preventive measures and avoidance DATA CENTRE EFFICIENCY * Business drivers to go Green High-availability or Green? Green guidelines and standards How to measure it and what are acceptable numbers compared to the general industry PUE classes defined by Green Grid and issues with PUE Techniques for saving energy in all parts of the data centre i.e. application/system level, cooling, power distribution MOCK EXAM EXAM: CERTIFIED DATA CENTRE SPECIALIST

Why Choose Complete Maya Beginner to Advanced Training? Maya's extensive toolkit includes modeling, animation, simulation, and more, amplifying your versatility and influence in the 3D production pipeline. Click here for more info: Website [https://www.autocadtraininglondon.co.uk/product-page/Complete-Maya-Beginner-Advanced-Training] Beginners or those with basic 3D knowledge. No specific digital media background is required. Duration: 40 hours Training Approach: 1-on-1 Sessions. Schedule: Customize your schedule by pre-booking a convenient hour of your choice, available Monday to Saturday between 9 am and 7 pm Course Structure: I. Introduction to Maya (3 hours) * Maya Overview and Applications * Interface Navigation and Basic Tools * Project Creation and Management II. Basic Polygon Modeling (6 hours) * Fundamentals of Polygon Modeling * Creating and Editing Basic Shapes * Advanced Techniques: Extrusions, Bevels, and NURBS for Organic Shapes III. Intermediate Modeling (6 hours) * Advanced Polygon Modeling: Booleans, Deformers, and Surfaces * Architectural Model Creation * Sculpting Tools for Organic Shapes IV. Texturing and Materials (6 hours) * Introduction to Texturing and Material Application * Texture Mapping, UV Unwrapping, and Shaders * Painting Textures with 3D Paint Tool V. Lighting and Rendering (6 hours) * Basic and Advanced Lighting Techniques * Realistic Lighting Environments * Camera Setup, Composition, and Rendering VI. Animation (9 hours) * Keyframe Animation and Animation Curves * Character Rigging and Animation * Complex Character Rigs, Lip Sync, Facial Animation, Dynamics, and Simulations VII. Rigging (4 hours) * Skeleton Creation and Joint Binding * Weight Maps and Simple to Complex Rigging Systems VIII. Special Effects (4 hours) * Particle Systems, Fluid Dynamics, Fire, and Explosions * Advanced Simulations with nCloth and nParticles * Paint Effects and Mash Networks IX. Advanced Rendering Techniques (2 hours) * Render Layers, Passes, and Global Illumination * Mental Ray Rendering and Settings X. Conclusion and Next Steps (1 hour) * Course Review, Tips for Further Learning * Q&A Session and Feedback Please note that the course outline is flexible and can be tailored based on the learners' needs and proficiency levels. Autodesk Maya Basics to Advanced Level Course: Modeling: * Surfaces, Control Vertex, Polygons, Extrusion Techniques, Subdiv Modeling, and More Deformations: * Twist, Lattice, Flare, Bend Tools Shapes: * Lines, Pen Tools, Surface Manipulation Techniques Animations: * Keyframe Setup, Path Animations, Skeletons, IK Handles, Skinning Dynamics and Special Effects: * Particle Systems, Fluid Dynamics, Lighting Effects, and Advanced Simulations Texturing and Rendering: * Diffuse and Bump Mapping, Reflections, Shaders, Lights, and Camera Techniques Fluid Effects and Ncloth: * 2D and 3D Containers, Collision Effects, Wind Simulations, and Gravity Control Rendering: * Image and Animation Rendering, Playblast, Resolution Controls, and Output Formats. * Advanced Modeling: Master intricate 3D models, including polygon, NURBS, and architectural modeling. * Expert Texturing: Create realistic textures, apply shaders, and utilize the 3D paint tool. * Complex Animation: Rig characters, perform lip sync, facial animation, and dynamic simulations. * Special Effects Mastery: Understand particle systems, fluid dynamics, fire effects, and advanced simulations. * Rendering Expertise: Grasp advanced rendering techniques, including layers, passes, and global illumination. * Comprehensive Rigging: Develop joints, skeletons, and advanced rigging systems for characters and objects. * Fluid Dynamics Proficiency: Manipulate 2D/3D fluid containers, create collision effects, and work with wind/gravity simulations. * Advanced Lighting and Camera: Perfect lighting, shadows, and special effects. Master camera setups for diverse visual compositions. Recommended Books: * "Introducing Autodesk Maya 2023" by Dariush Derakhshani and Randi L. Derakhshani * "Mastering Autodesk Maya 2023" by Todd Palamar * "Maya Character Creation: Modeling and Animation Controls" by Chris Maraffi * "Maya Secrets of the Pros" by John Kundert-Gibbs and Dariush Derakhshani * "The Art of 3D Computer Animation and Effects" by Isaac Victor Kerlow Advanced Maya Training Tailored to You: Elevate your Maya skills with specialized training covering essential areas like modeling, UV mapping, texturing, lighting, camera movement, and rigging. Your learning experience is personalized to match your unique requirements and preferences. Discuss your goals with our trainer, and we'll create a syllabus tailored just for you. Flexible Training Choices: Select between in-person sessions at our UK center or attend live online classes, offering convenience and accessibility. Certified Instructors: Benefit from expert guidance provided by Autodesk Authorized Trainers from London Design Training Course. Hands-On Learning: Our practical approach combines theory with step-by-step demonstrations, allowing ample time for hands-on practice on your computer with Maya. You'll retain all the files you create. Compatibility Across Platforms: Maya training caters to both Windows and Mac users, ensuring compatibility with various versions of Maya. Comprehensive Training Package: Participants receive an e-certificate upon successful completion, validating their Maya training. Lifetime Support: Enjoy a lifetime of email support post-training, ensuring assistance with any queries or challenges that arise. Tailored to Your Version: Training can be adapted to your preferred Maya version, ensuring you learn using the most relevant and up-to-date software features. Download Maya  https://www.autodesk.co.uk [https://www.autodesk.co.uk]  Highly skilled mentors with practical experience. Cutting-edge facilities ensuring an immersive learning environment. Comprehensive courses spanning diverse design disciplines. Practical projects to enhance your portfolio. Networking avenues within the dynamic design community. Skills attuned to current industry trends. Opportunities for professional growth. Choose from flexible in-person or online classes. Internationally recognized training credentials. Engage in London's thriving art and design scene.

In today's digital age, the heart of every successful business lies in its data center. Dive deep into the very essence of a data center's mechanical systems with our 'Data Center Training Essentials: Mechanical & Cooling' course. Understand how the right cooling mechanisms can significantly impact the efficiency and longevity of your servers. As the digital era progresses, ensuring optimal cooling in data centers is crucial. Our expertly designed modules will give you a profound understanding of both air and water cooling techniques, alongside insights into computational fluid dynamics. Learning Outcomes * Understand the fundamental principles of mechanical systems in data centers. * Differentiate between various data center cooling methodologies. * Grasp the intricate concepts behind computational fluid dynamics. * Master the operations and maintenance of water systems within data centers. * Implement strategies to enhance the efficiency of cooling systems. WHY CHOOSE THIS DATA CENTER TRAINING ESSENTIALS: MECHANICAL & COOLING COURSE? * Unlimited access to the course for a lifetime. * Opportunity to earn a certificate accredited by the CPD Quality Standards after completing this course. * Structured lesson planning in line with industry standards. * Immerse yourself in innovative and captivating course materials and activities. * Assessments are designed to evaluate advanced cognitive abilities and skill proficiency. * Flexibility to complete the Data Center Training Essentials: Mechanical & Cooling Course at your own pace, on your own schedule. * Receive full tutor support throughout the week, from Monday to Friday, to enhance your learning experience. WHO IS THIS DATA CENTER TRAINING ESSENTIALS: MECHANICAL & COOLING COURSE FOR? * Professionals looking to broaden their knowledge in data center operations. * Engineers aiming to specialize in data center mechanical systems. * IT managers overseeing data center management and operations. * Individuals keen to understand the intricacies of data center cooling. * Students and fresh graduates aspiring for a career in data center operations. CAREER PATH * Data Center Technician: £30,000 - £40,000 * Data Center Operations Manager: £50,000 - £65,000 * Cooling System Specialist: £35,000 - £47,000 * Mechanical Engineer (Data Center Specialisation): £45,000 - £60,000 * Facilities Manager (Data Center): £55,000 - £70,000 * Thermal Analysis Engineer: £40,000 - £54,000 PREREQUISITES This Data Center Training Essentials: Mechanical & Cooling does not require you to have any prior qualifications or experience. You can just enrol and start learning.This Data Center Training Essentials: Mechanical & Cooling was made by professionals and it is compatible with all PC's, Mac's, tablets and smartphones. You will be able to access the course from anywhere at any time as long as you have a good enough internet connection. CERTIFICATION After studying the course materials, there will be a written assignment test which you can take at the end of the course. After successfully passing the test you will be able to claim the pdf certificate for £4.99 Original Hard Copy certificates need to be ordered at an additional cost of £8. COURSE CURRICULUM Data Center Training Essentials: Mechanical & Cooling Module 01:Data Center Mechanical Introduction 01:01:00 Module 02: Data Center Air Cooling 00:51:00 Module 03: Data Center Computational Fluid Dynamics 01:02:00 Module 04: Data Center Water Cooling 00:53:00 Module 05: Data Center Water Systems Operation 01:03:00 Assignment Assignment - Data Center Training Essentials: Mechanical & Cooling 00:00:00

ABOUT THIS VIRTUAL INSTRUCTOR LED TRAINING (VILT) This 2 half-day Virtual Instructor-Led Training (VILT) course will guide participants on the technoeconomic aspects of capture, utilization and geological storage of carbon dioxide. The VILT course will address the methods and techniques used in the technoeconomic assessment of Carbon Capture, Utilization & Storage (CCUS) projects. It will explore in detail the factors that affect the cost-effectiveness of current and emerging technologies for CO2 capture, transport and geological storage, including monitoring and verification. Given that the successful deployment of CCUS may require economic incentives, technical and economic drivers such as technological innovation, optimization, source sink matching and emerging opportunities will also be discussed. In addition, using several worked examples and case studies, this VILT course will explain the principles behind the analysis of the costs and opportunities of a CCS / CCUS project from source to sink and examines the possibilities of using carbon dioxide from an economic perspective. Training Objectives Upon completion of this VILT course, participants will be able to: * Describe the economic considerations for CCS / CCUS projects * Measure and calculate the cost-effectiveness of CCS / CCUS * Identify the economic drivers for CCS / CCUS * Understand the value of source to sink matching * Outline the economic and environmental opportunities as well as challenges with using carbon dioxide injection in a range of applications * Recognize niche opportunities for CO2 storage (coal seams, basalts, salt and others)   Target Audience This VILT course is ideally suited for a technical audience such as geoscientists, petroleum and chemical engineers as well as professionals such as economists, regulators, legal staff and managers wishing to learn more about the details of economic aspects and the basis for techno-economic analysis of Carbon Capture, Utilization and Storage projects. The VILT course is presented in an interactive workshop format, allowing for discussions. Participants should have: * Basic background knowledge of CCUS technologies * Experience with oil and gas, coal or other energy projects * Basic understanding of the energy industry Course Level * Basic or Foundation Training Methods The VILT course will be delivered online in 2 half-day sessions comprising 4 hours per day, with 2 breaks of 15 minutes per day. The VILT course is presented in an interactive workshop format that allows discussion. Course Duration: 2 half-day sessions, 4 hours per session (8 hours in total). Trainer Your expert course leader received his B.Eng. in Chemical and Environmental Systems in 2002 from Tecnológico de Monterrey, Mexico, and his Ph.D. in Chemical Engineering in 2008 from the University of New South Wales (UNSW), in Sydney, Australia, at the UNESCO Centre for Membrane Science and Technology. His doctoral used computational fluid dynamics (CFD) to analyse the flows within membrane modules used for water treatment and desalination. He also worked on a desalination linkage project between the UNSW and the European Union, as part of Framework Programme 6. From 2009 to 2014, he worked for the Cooperative Research Centre for Greenhouse Gas Technologies (CO2CRC), where he led the research into CO2 Transport Networks, co-led the development of a techno-economic model for the analysis of Carbon Capture and Storage (CCS) projects, and collaborated on several consultancy and feasibility studies conducted by CO2CRC for both Government and Industry. From 2014 to 2019, he held a CONACYT Research Fellowship at the Instituto Tecnológico de Sonora (ITSON) in Mexico, where he led collaborative research projects dealing with RO membrane biofouling (IHE-Delft), membrane modifications, solar energy use for desalination (CSIR-CSMCRI India) and CFD modelling of the hydrodynamics in membrane modules (UMP Malaysia). Since July 2019, he is a Research Fellow in the School of Chemical and Biomolecular Engineering at the University of Sydney, where his research focuses on finding ways to reduce the cost, energy use and environmental impact of technologies for providing clean energy and water. From 2015 to 2020, he was a Member of the Board of Directors of the Mexican Society of Membrane Science and Technology. He guest edited a special edition on CCS for the Journal 'Technologies' and is currently an Editorial Board member for the journal, 'Energies', a peer-reviewed open-access scientific journal. His research interests include improving the efficiency of osmotic membrane separation processes, modelling complex processes involving heat and mass transfer, and exploring the economic drivers of low emission technologies such as the Carbon Capture and Storage (CCS) chain. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

Data Center Training : Mechanical & Cooling is yet another 'Teacher's Choice' course from Teachers Training for a complete understanding of the fundamental topics. You are also entitled to exclusive tutor support and a professional CPD-accredited certificate in addition to the special discounted price for a limited time. Just like all our courses, this Data Center Training : Mechanical & Cooling and its curriculum have also been designed by expert teachers so that teachers of tomorrow can learn from the best and equip themselves with all the necessary skills. Consisting of several modules, the course teaches you everything you need to succeed in this profession. The course can be studied part-time. You can become accredited within 05 hours studying at your own pace. Your qualification will be recognised and can be checked for validity on our dedicated website. WHY CHOOSE TEACHERS TRAINING Some of our website features are: * This is a dedicated website for teaching * 24/7 tutor support * Interactive Content * Affordable price * Courses accredited by the UK's top awarding bodies * 100% online * Flexible deadline ENTRY REQUIREMENTS No formal entry requirements. You need to have: * Passion for learning * A good understanding of the English language * Be motivated and hard-working * Over the age of 16. CERTIFICATION CPD Certification from The Teachers Training Successfully completing the MCQ exam of this course qualifies you for a CPD-accredited certificate from The Teachers Training. You will be eligible for both PDF copy and hard copy of the certificate to showcase your achievement however you wish. * You can get your digital certificate (PDF) for £4.99 only * Hard copy certificates are also available, and you can get one for only £10.99 * You can get both PDF and Hard copy certificates for just £12.99! The certificate will add significant weight to your CV and will give you a competitive advantage when applying for jobs. Data Center Training : Mechanical & Cooling Module 01:Data Center Mechanical Introduction 01:01:00 Module 02: Data Center Air Cooling 00:51:00 Module 03: Data Center Computational Fluid Dynamics 01:02:00 Module 04: Data Center Water Cooling 00:53:00 Module 05: Data Center Water Systems Operation 01:03:00

OVERVIEW This comprehensive course on Data Center Training Essentials: Mechanical & Cooling will deepen your understanding on this topic. After successful completion of this course you can acquire the required skills in this sector. This Data Center Training Essentials: Mechanical & Cooling comes with accredited certification from CPD, which will enhance your CV and make you worthy in the job market. So enrol in this course today to fast track your career ladder. HOW WILL I GET MY CERTIFICATE? You may have to take a quiz or a written test online during or after the course. After successfully completing the course, you will be eligible for the certificate. WHO IS THIS COURSE FOR? There is no experience or previous qualifications required for enrolment on this Data Center Training Essentials: Mechanical & Cooling. It is available to all students, of all academic backgrounds. REQUIREMENTS Our Data Center Training Essentials: Mechanical & Cooling is fully compatible with PC's, Mac's, Laptop, Tablet and Smartphone devices. This course has been designed to be fully compatible with tablets and smartphones so you can access your course on Wi-Fi, 3G or 4G. There is no time limit for completing this course, it can be studied in your own time at your own pace. CAREER PATH Having these various qualifications will increase the value in your CV and open you up to multiple sectors such as Business & Management, Admin, Accountancy & Finance, Secretarial & PA, Teaching & Mentoring etc. COURSE CURRICULUM 2 sections • 6 lectures • 04:50:00 total length •Module 01:Data Center Mechanical Introduction: 01:01:00 •Module 02: Data Center Air Cooling: 00:51:00 •Module 03: Data Center Computational Fluid Dynamics: 01:02:00 •Module 04: Data Center Water Cooling: 00:53:00 •Module 05: Data Center Water Systems Operation: 01:03:00 •Assignment - Data Center Training Essentials: Mechanical & Cooling: 00:00:00

Gain the solid skills and knowledge to kickstart a successful career and learn from the experts with this

Take This Course * £175.00 £21.00 * 1 year * Intermediate * Course Certificate * Number of Units6 * Number of Quizzes0 * 4 hours, 50 minutes Gift this course * * * * COURSE OVERVIEW In this competitive job market, you need to have some specific skills and knowledge to start your career and establish your position. This Data Center Training Essentials: Mechanical & Cooling will help you understand the current demands, trends and skills in the sector. The course will provide you with the essential skills you need to boost your career growth in no time. The Data Center Training Essentials: Mechanical & Cooling will give you clear insight and understanding about your roles and responsibilities, job perspective and future opportunities in this field. You will be familiarised with various actionable techniques, career mindset, regulations and how to work efficiently. This course is designed to provide an introduction to Data Center Training Essentials: Mechanical & Cooling and offers an excellent way to gain the vital skills and confidence to work toward a successful career. It also provides access to proven educational knowledge about the subject and will support those wanting to attain personal goals in this area. LEARNING OBJECTIVES * Learn the fundamental skills you require to be an expert * Explore different techniques used by professionals * Find out the relevant job skills & knowledge to excel in this profession * Get a clear understanding of the job market and current demand * Update your skills and fill any knowledge gap to compete in the relevant industry * CPD accreditation for proof of acquired skills and knowledge WHO IS THIS COURSE FOR? Whether you are a beginner or an existing practitioner, our CPD accredited Data Center Training Essentials: Mechanical & Cooling is perfect for you to gain extensive knowledge about different aspects of the relevant industry to hone your skill further. It is also great for working professionals who have acquired practical experience but require theoretical knowledge with a credential to support their skill, as we offer CPD accredited certification to boost up your resume and promotion prospects. ENTRY REQUIREMENT Anyone interested in learning more about this subject should take this Data Center Training Essentials: Mechanical & Cooling. This course will help you grasp the basic concepts as well as develop a thorough understanding of the subject. The course is open to students from any academic background, as there is no prerequisites to enrol on this course. The course materials are accessible from an internet enabled device at anytime of the day. CPD CERTIFICATE FROM COURSE GATE At the successful completion of the course, you can obtain your CPD certificate from us. You can order the PDF certificate for £9 and the hard copy for £15. Also, you can order both PDF and hardcopy certificates for £22. CAREER PATH The Data Center Training Essentials: Mechanical & Cooling will help you to enhance your knowledge and skill in this sector. After accomplishing this course, you will enrich and improve yourself and brighten up your career in the relevant job market. COURSE CURRICULUM Data Center Training Essentials: Mechanical & Cooling Unit 01:Data Center Mechanical Introduction 01:01:00 Unit 02: Data Center Air Cooling 00:51:00 Unit 03: Data Center Computational Fluid Dynamics 01:02:00 Unit 04: Data Center Water Cooling 00:53:00 Unit 05: Data Center Water Systems Operation 01:03:00 Certificate and Transcript Order Your Certificates or Transcripts 00:00:00

Why Choose Mastering Maya Basics to Intermediate Course? Click here for more info: Website [https://www.autocadtraininglondon.co.uk/product-page/maya-basics-to-intermediate-course-mastering] Our courses cater to graphic designers, animators, and beginners, providing industry-standard animation skills. Dive into 3D animation, modeling, simulation, and rendering for film, TV, games, and ads. Duration: 20 hours Approach: 1-on-1 Sessions. Schedule: Design your own schedule by pre-booking a convenient hour of your choice, available Mon to Sat between 9 am and 7 pm. I. Introduction to Maya (1.5 hours) * Understanding Maya and its Applications * Navigating the Maya Interface and Basic Tools * Creating and Managing Projects II. 3D Modeling (3 hours) * Basics of Polygon Modeling * Creating Simple and Complex 3D Shapes * Organic Shape Creation using NURBS * Advanced Techniques: Extrusions, Bevels, and Editable Objects III. Texturing and Materials (1.5 hours) * Introduction to Texturing and Material Creation * UV Unwrapping and Texture Mapping * Importing and Applying Textures and Images IV. Lighting and Rendering (2 hours) * Fundamental Lighting Techniques * Camera Setup and Composition * Rendering Images and Animations * Output Options and File Formats V. Animation (4 hours) * Keyframe Animation and Animation Curves * Rigging and Animating Characters * Motion Paths and Animation Layers * Editing Animation Clips VI. Rigging (2 hours) * Introduction to Rigging and Skeletons * Binding Skin and Weight Maps * Creating Rigging Systems for Characters VII. Special Effects (1.5 hours) * Particle Systems and Dynamics * Creating Fluids, Fire, and Other Effects * Special Effects Editing: Explosions, Smoke, and more VIII. Advanced Modeling Techniques (1.5 hours) * Complex Objects using Booleans and Deformers * Modifying Curves and Surfaces * Organic Shape Creation with Sculpting Tools IX. Conclusion and Next Steps (0.5 hours) * Course Review * Further Learning Tips and Resources * Q&A and Feedback Please note: The course content and duration are flexible, tailored to match learners' needs and skill levels. Throughout the course, lifetime email support ensures you receive guidance with any challenges you face. Embark on your Autodesk Maya journey, exploring 3D modeling and animation with confidence. Additional Topics Covered: * Modeling: Surfaces, Control Vertex, Polygons, Extrusion, Vertices, Edges, Bridge Tool, Combining, Smooth, Mirror Geometry, Merging Vertices, Subdivision Modeling. * Deformations: Twist, Lattice, Flare, Bend. * Shapes: Lines, Pen Tools. * Animations: Basic Keyframes, Vertex Animation, Clusters, Path Animations, Skeletons, Bones, IK Handle Tool, Skinning. * Dynamics: Fire, Lighting, Soft and Rigid Bodies, Particles, Collisions, Gravity. * Fur and Paint Effects: Fur Basics, Fur Color Corrections, Paint Effects, Paint Modifier, Brush Animations. * Texturing: Diffuse and Bump Maps, Reflections, Transparency, Shaders, Toon Shaders, Glow Textures. * Lighting: Basic and Advanced Lights, Shadows, Special Light Effects. * Camera: Free and Aim Cameras, Camera Effects, Path Animations. * Fluid Effects and Ncloth: 2D and 3D Containers, Collision Effects, Gravity, Wind Effects. * Rendering: Images and Animations, Render Techniques, Resolution Settings, Batch Rendering. Download Maya [https://www.autodesk.co.uk/products/maya/free-trial] * Maya Proficiency: Master Maya's interface, tools, and functions, advancing from basic to intermediate levels. * 3D Modeling Expertise: Create diverse 3D models using polygonal and NURBS techniques, from simple shapes to intricate designs. * Texturing and Rendering Skills: Apply textures, create materials, and utilize advanced rendering techniques for high-quality visuals. * Animation Techniques: Understand keyframe animation, rigging, and character animation, producing engaging animations and special effects. * Special Effects and Dynamics: Explore particle systems, fluid dynamics, and advanced visual effects, enhancing realism in animations. * Advanced Modeling and Sculpting: Master complex modeling techniques, including Booleans, deformers, and organic shape creation through sculpting tools. * Professional Portfolio: Develop a diverse portfolio showcasing 3D modeling and animation skills, ready for presentation to employers or clients. * Problem-Solving Skills: Learn creative approaches to solve complex 3D challenges effectively. * Collaborative Abilities: Understand team dynamics and collaboration within the 3D production pipeline. * Recommended Books: * "Introducing Autodesk Maya 202X" by Dariush Derakhshani and Randi L. Derakhshani: Comprehensive beginner's guide to Maya's essential tools and techniques. * "Mastering Autodesk Maya 20XX" by Todd Palamar: In-depth intermediate guide covering advanced features, modeling, animation, and rendering. * "Maya Character Creation: Modeling and Animation Controls" by Chris Maraffi: Focuses on character creation, covering modeling, rigging, and animation. * "Maya Secrets of the Pros" by Todd Palamar: Expert tips and techniques from professional Maya artists, detailing advanced workflows and best practices. * "Stop Staring: Facial Modeling and Animation Done Right" by Jason Osipa: Specialized book on facial modeling and animation, perfect for character expression enthusiasts. * "The Art of 3D Computer Animation and Effects" by Isaac Kerlow: Offers foundational knowledge in 3D computer animation principles, applicable to various software, including Maya. Mastering Maya Basics to Intermediate Course Benefits: * Comprehensive Skill Development: Master essential tools and techniques, from basics to intermediate, with hands-on projects mirroring real industry scenarios. * Industry-Grade Proficiency: Acquire expertise in Autodesk Maya, enhancing credibility in animation, visual effects, and gaming industries. * Creative Exploration: Unlock creative potential through advanced shading, lighting, dynamics, and simulations, enabling imaginative project realization. * Portfolio Enhancement: Build a strong portfolio showcasing skills in 3D modeling, animation, and rendering for career advancement. * Individualized Support: Receive personalized guidance and feedback, ensuring tailored learning experiences and skill refinement. Potential Jobs After Course: * 3D Animator: Create lifelike character animations for films, games, and advertisements. * 3D Modeler: Design detailed 3D characters, environments, and objects for various applications. * Visual Effects Artist: Produce stunning visual effects for movies, TV shows, and commercials. * Texture/Lighting Artist: Develop intricate textures and set the mood with expert lighting. * Rigging Specialist: Rig characters and objects for realistic movement in animations. * Rendering Specialist: Optimize rendering capabilities for high-quality images and animations. * Game Developer: Contribute to interactive game development using Maya's features. * Freelance Artist/Animator: Work independently on diverse projects, collaborating with studios and agencies. Skill Advancement: Progressive Mastery: Develop from basics to intermediate levels in Autodesk Maya, honing essential tools for stunning 3D visuals and animations. Hands-On Learning: Interactive Practice: Engage in practical projects, refining your skills in 3D modeling, advanced materials, character animation, and high-quality renders. Industry-Ready Proficiency: In-Demand Skills: Acquire proficiency in Autodesk Maya, a key software in animation and gaming, enhancing your employability. Creative Exploration: Unlock Creativity: Experiment with advanced shading, lighting, and dynamic animations, unleashing your creative potential in Maya. Flexible Support: Tailored Learning: Access recorded lessons for review, deepening your understanding, with lifetime email support for continuous guidance.